summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
...
* net: qca_spi: Make sure the QCA7000 reset is triggeredStefan Wahren2018-08-241-0/+3
| | | | | | | | | | | | | | [ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ] In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: qca_spi: Avoid packet drop during initial syncStefan Wahren2018-08-241-1/+1
| | | | | | | | | | | | | | [ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ] As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: usb: rtl8150: demote allmulti message to dev_dbg()David Lechner2018-08-241-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f ] This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()Dan Carpenter2018-08-241-2/+2
| | | | | | | | | | | | | [ Upstream commit 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 ] The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* qlogic: check kstrtoul() for errorsDan Carpenter2018-08-241-0/+2
| | | | | | | | | | | | [ Upstream commit 5fc853cc01c68f84984ecc2d5fd777ecad78240f ] We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ixgbe: Be more careful when modifying MAC filtersAlexander Duyck2018-08-241-1/+11
| | | | | | | | | | | | | | | | | | [ Upstream commit d14c780c11fbc10f66c43e7b64eefe87ca442bd3 ] This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnxt_en: Fix for system hang if request_irq failsVikas Gupta2018-08-241-1/+3
| | | | | | | | | | | | | | | [ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/armada: fix colorkey mode propertyRussell King2018-08-242-8/+23
| | | | | | | | | | | | [ Upstream commit d378859a667edc99e3473704847698cae97ca2b1 ] The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problemStefan Schmidt2018-08-241-1/+1
| | | | | | | | | | | | [ Upstream commit 8f2fbc6c60ff213369e06a73610fc882a42fdf20 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ieee802154: at86rf230: use __func__ macro for debug messagesStefan Schmidt2018-08-241-9/+4
| | | | | | | | | | | | | | [ Upstream commit 8a81388ec27c4c0adbdecd20e67bb5f411ab46b2 ] Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problemStefan Schmidt2018-08-241-1/+1
| | | | | | | | | | | | [ Upstream commit 20f330452ad8814f2289a589baf65e21270879a7 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino2018-08-241-0/+62
| | | | | | | | | | | | [ Upstream commit d461e3da905332189aad546b2ad9adbe6071c7cc ] In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: wacom: Correct touch maximum XY of 2nd-gen IntuosJason Gerecke2018-08-241-2/+8
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 3b8d573586d1b9dee33edf6cb6f2ca05f4bca568 ] The touch sensors on the 2nd-gen Intuos tablets don't use a 4096x4096 sensor like other similar tablets (3rd-gen Bamboo, Intuos5, etc.). The incorrect maximum XY values don't normally affect userspace since touch input from these devices is typically relative rather than absolute. It does, however, cause problems when absolute distances need to be measured, e.g. for gesture recognition. Since the resolution of the touch sensor on these devices is 10 units / mm (versus 100 for the pen sensor), the proper maximum values can be calculated by simply dividing by 10. Fixes: b5fd2a3e92 ("Input: wacom - add support for three new Intuos devices") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: Fix receiving tx-timeout in error or recovery state.Sudarsana Reddy Kalluru2018-08-243-0/+13
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 484c016d9392786ce5c74017c206c706f29f823d ] Driver performs the internal reload when it receives tx-timeout event from the OS. Internal reload might fail in some scenarios e.g., fatal HW issues. In such cases OS still see the link, which would result in undesirable functionalities such as re-generation of tx-timeouts. The patch addresses this issue by indicating the link-down to OS when tx-timeout is detected, and keeping the link in down state till the internal reload is successful. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/exynos: decon5433: Fix WINCONx reset valueMarek Szyprowski2018-08-241-1/+1
| | | | | | | | | | | | | [ Upstream commit 7b7aa62c05eac9789c208b946f515983a9255d8d ] The only bits that should be preserved in decon_win_set_fmt() is WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and are set by the mentioned function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/exynos: decon5433: Fix per-plane global alpha for XRGB modesMarek Szyprowski2018-08-241-2/+2
| | | | | | | | | | | | [ Upstream commit ab337fc274a1957ff0771f19e826c736253f7c39 ] Set per-plane global alpha to maximum value to get proper blending of XRGB and ARGB planes. This fixes the strange order of overlapping planes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modesMarek Szyprowski2018-08-242-9/+21
| | | | | | | | | | | | | | [ Upstream commit dd209ef809080ced903e7747ee3ef640c923a1d2 ] Fix following issues related to planar YUV pixel format configuration: - NV16/61 modes were incorrectly programmed as NV12/21, - YVU420 was programmed as YUV420 on source, - YVU420 and YUV422 were programmed as YUV420 on output. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md/raid10: fix that replacement cannot complete recovery after reassembleBingJing Chang2018-08-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit bda3153998f3eb2cafa4a6311971143628eacdbc ] During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()Dan Carpenter2018-08-241-1/+1
| | | | | | | | | | | | | [ Upstream commit c4c2b7644cc9a41f17a8cc8904efe3f66ae4c7ed ] The d->chans[] array has d->dma_requests elements so the > should be >= here. Fixes: 8e6152bc660e ("dmaengine: Add hisilicon k3 DMA engine driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: increase CRS timeout valueAjay Gupta2018-08-241-1/+6
| | | | | | | | | | | | | | | | | [ Upstream commit 305886ca87be480ae159908c2affd135c04215cf ] Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta <ajaykuee@gmail.com> Signed-off-by: Nagaraj Annaiah <naga.annaiah@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* brcmfmac: stop watchdog before detach and free everythingMichael Trimarchi2018-08-241-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 373c83a801f15b1e3d02d855fad89112bd4ccbe0 ] Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cxgb4: when disabling dcb set txq dcb priority to 0Ganesh Goudar2018-08-241-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 5ce36338a30f9814fc4824f9fe6c20cd83d872c7 ] When we are disabling DCB, store "0" in txq->dcb_prio since that's used for future TX Work Request "OVLAN_IDX" values. Setting non zero priority upon disabling DCB would halt the traffic. Reported-by: AMG Zollner Robert <robert@cloudmedia.eu> CC: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: davinci_emac: match the mdio device against its compatible if possibleBartosz Golaszewski2018-08-241-0/+4
| | | | | | | | | | | | | [ Upstream commit ea0820bb771175c7d4192fc6f5b5c56b3c6d5239 ] Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: hamradio: use eth_broadcast_addrStefan Agner2018-08-241-6/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 4e8439aa34802deab11cee68b0ecb18f887fb153 ] The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* enic: initialize enic->rfs_h.lock in enic_probeGovindarajulu Varadarajan2018-08-242-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3256d29fc7aecdf99feb1cb9475ed2252769a8a7 ] lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* qed: Add sanity check for SIMD fastpath handler.Sudarsana Reddy Kalluru2018-08-241-2/+10
| | | | | | | | | | | | | | | | [ Upstream commit 3935a70968820c3994db4de7e6e1c7e814bff875 ] Avoid calling a SIMD fastpath handler if it is NULL. The check is needed to handle an unlikely scenario where unsolicited interrupt is destined to a PF in INTa mode. Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: xen-scsifront: add error handling for xenbus_printfZhouyang Jia2018-08-241-7/+26
| | | | | | | | | | | | | | | [ Upstream commit 93efbd39870474cc536b9caf4a6efeb03b0bc56f ] When xenbus_printf fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling xenbus_printf. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: dwc2: fix memory leak in gadget_init()Grigor Tovmasyan2018-08-241-2/+5
| | | | | | | | | | | | | | | | | [ Upstream commit 9bb073a053f0464ea74a4d4c331fdb7da58568d6 ] Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: composite: fix delayed_status race condition when set_interfaceChunfeng Yun2018-08-241-0/+3
| | | | | | | | | | | | | | | [ Upstream commit 980900d6318066b9f8314bfb87329a20fd0d1ca4 ] It happens when enable debug log, if set_alt() returns USB_GADGET_DELAYED_STATUS and usb_composite_setup_continue() is called before increasing count of @delayed_status, so fix it by using spinlock of @cdev->lock. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Jay Hsu <shih-chieh.hsu@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: fix isoc split in transfer with no dataWilliam Wu2018-08-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 70c3c8cb83856758025c2a211dd022bc0478922a ] If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by: Gevorg Sahakyan <sahakyan@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* isdn: Disable IIOCDBGVARKees Cook2018-08-221-7/+1
| | | | | | | | | | | | | | | | [ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ] It was possible to directly leak the kernel address where the isdn_dev structure pointer was stored. This is a kernel ASLR bypass for anyone with access to the ioctl. The code had been present since the beginning of git history, though this shouldn't ever be needed for normal operation, therefore remove it. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250_dw: always set baud rate in dw8250_set_termiosChen Hu2018-08-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream. dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu <hu1.chen@intel.com> Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / PM: save NVS memory for ASUS 1025C laptopWilly Tarreau2018-08-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream. Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an issue by which the fan would run at full speed upon resume. Bisecting it showed me the issue was introduced in 3.17 by commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3). This code only affects machines built starting as of 2012, but this Asus 1025C laptop was made in 2012 and apparently needs the NVS data to be saved, otherwise the CPU's thermal state is not properly reported on resume and the fan runs at full speed upon resume. Here's a very simple way to check if such a machine is affected : # cat /sys/class/thermal/thermal_zone0/temp 55000 ( now suspend, wait one second and resume ) # cat /sys/class/thermal/thermal_zone0/temp 0 (and after ~15 seconds the fan starts to spin) Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory for Lenovo G50-45) and reuse the function it provides. Note that this commit was already backported to 4.9.x but not 4.4.x. Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13 Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI: save NVS memory for Lenovo G50-45Zhang Rui2018-08-221-0/+19
| | | | | | | | | | | | | | | | | | | | commit cbc00c1310d34139a63946482b40a6b261a03fb9 upstream. In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431 Tested-by: Przemek <soprwa@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> [ rjw: Drop unnecessary code ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add support for DW5821eAleksander Morgado2018-08-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: sierra: fix potential deadlock at closeJohn Ogness2018-08-221-2/+2
| | | | | | | | | | | | | | | | | | commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream. The portdata spinlock can be taken in interrupt context (via sierra_outdat_callback()). Disable interrupts when taking the portdata spinlock when discarding deferred URBs during close to prevent a possible deadlock. Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect") Cc: stable <stable@vger.kernel.org> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ johan: amend commit message and add fixes and stable tags ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: ismt: fix wrong device address when unmap the data bufferLiwei Song2018-08-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 17e83549e199d89aace7788a9f11c108671eecf5 upstream. Fix the following kernel bug: kernel BUG at drivers/iommu/intel-iommu.c:3260! invalid opcode: 0000 [#5] PREEMPT SMP Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016 task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000 RIP: 0010:[<ffffffff8150a83b>] [<ffffffff8150a83b>] intel_unmap+0x25b/0x260 RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296 RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04 RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004 R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868 R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001 FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0 Stack: 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e Call Trace: [<ffffffff8199867f>] ? printk+0x46/0x48 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt] [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev] [<ffffffff810aa829>] ? vprintk_default+0x29/0x40 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev] [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter. After finished I2C block read/write, when unmap the data buffer, a wrong device address was pass to dma_unmap_single(). To fix this, give dma_unmap_single() the "dev" parameter, just like what dma_map_single() does, then unmap can find the right devices. Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by: Liwei Song <liwei.song@windriver.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/speculation/l1tf: Add sysfs reporting for l1tfAndi Kleen2018-08-151-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream L1TF core kernel workarounds are cheap and normally always enabled, However they still should be reported in sysfs if the system is vulnerable or mitigated. Add the necessary CPU feature/bug bits. - Extend the existing checks for Meltdowns to determine if the system is vulnerable. All CPUs which are not vulnerable to Meltdown are also not vulnerable to L1TF - Check for 32bit non PAE and emit a warning as there is no practical way for mitigation due to the limited physical address bits - If the system has more than MAX_PA/2 physical memory the invert page workarounds don't protect the system against the L1TF attack anymore, because an inverted physical address will also point to valid memory. Print a warning in this case and report that the system is vulnerable. Add a function which returns the PFN limit for the L1TF mitigation, which will be used in follow up patches for sanity and range checks. [ tglx: Renamed the CPU feature bit to L1TF_PTEINV ] [ dwmw2: Backport to 4.9 (cpufeatures.h, E820) ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* IB/ocrdma: fix out of bounds access to local bufferMichael Mera2018-08-151-1/+1
| | | | | | | | | | | | | | | | | | commit 062d0f22a30c39840ea49b72cfcfc1aa4cc538fa upstream. In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is written at index 'count-1' where 'count' is the size of the write, so potentially 0. This patch filters odd values for the write size/position to avoid this type of problem. Signed-off-by: Michael Mera <dev@michaelmera.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* IB/mlx4: Mark user MR as writable if actual virtual memory is writableJack Morgenstein2018-08-151-8/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d8f9cc328c8888369880e2527e9186d745f2bbf6 upstream. To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* IB/core: Make testing MR flags for writability a static inline functionJack Morgenstein2018-08-151-10/+1
| | | | | | | | | | | | | | | | commit 08bb558ac11ab944e0539e78619d7b4c356278bd upstream. Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management ↵Bart Van Assche2018-08-151-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enabled commit 1214fd7b497400d200e3f4e64e2338b303a20949 upstream. Surround scsi_execute() calls with scsi_autopm_get_device() and scsi_autopm_put_device(). Note: removing sr_mutex protection from the scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of sr_mutex is to serialize cdrom_*() calls. This patch avoids that complaints similar to the following appear in the kernel log if runtime power management is enabled: INFO: task systemd-udevd:650 blocked for more than 120 seconds. Not tainted 4.18.0-rc7-dbg+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. systemd-udevd D28176 650 513 0x00000104 Call Trace: __schedule+0x444/0xfe0 schedule+0x4e/0xe0 schedule_preempt_disabled+0x18/0x30 __mutex_lock+0x41c/0xc70 mutex_lock_nested+0x1b/0x20 __blkdev_get+0x106/0x970 blkdev_get+0x22c/0x5a0 blkdev_open+0xe9/0x100 do_dentry_open.isra.19+0x33e/0x570 vfs_open+0x7c/0xd0 path_openat+0x6e3/0x1120 do_filp_open+0x11c/0x1c0 do_sys_open+0x208/0x2d0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Maurizio Lombardi <mlombard@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devicesHans de Goede2018-08-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit fdcb613d49321b5bf5d5a1bd0fba8e7c241dcc70 upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c748179754 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb8a7f ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen/netfront: don't cache skb_shinfo()Juergen Gross2018-08-151-4/+4
| | | | | | | | | | | | | | commit d472b3a6cf63cd31cae1ed61930f07e6cd6671b5 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tpm: fix race condition in tpm_common_write()Tadeusz Struk2018-08-151-23/+20
| | | | | | | | | | | | | | | | | | | | | commit 3ab2011ea368ec3433ad49e1b9e1c7b70d2e65df upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: imx: Fix reinit_completion() useEsben Haabendal2018-08-091-2/+1
| | | | | | | | | | | | | | | | commit 9f9e3e0d4dd3338b3f3dde080789f71901e1e4ff upstream. Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by: Esben Haabendal <eha@deif.com> Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI / PCI: Bail early in acpi_pci_add_bus() if there is no ACPI handleVitaly Kuznetsov2018-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit a0040c0145945d3bd203df8fa97f6dfa819f3f7d upstream. Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Return error when TMF returnsAnil Gurumurthy2018-08-091-4/+3
| | | | | | | | | | | | | | | commit b4146c4929ef61d5afca011474d59d0918a0cd82 upstream. Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: <stable@vger.kernel.org> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: qla2xxx: Fix ISP recovery on unloadQuinn Tran2018-08-091-2/+3
| | | | | | | | | | | | | | | | commit b08abbd9f5996309f021684f9ca74da30dcca36a upstream. During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sg: fix minor memory leak in error pathTony Battersby2018-08-061-0/+1
| | | | | | | | | | | | | | | commit c170e5a8d222537e98aa8d4fddb667ff7a2ee114 upstream. Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling") Cc: <stable@vger.kernel.org> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-15 19:46:03 +0000