summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* clk: imx8mp: fix usb_root_clk parentPeng Fan2022-06-221-1/+1
| | | | | | | | | | | | | | commit cf7f3f4fa9e57b8e9f594823e77e6cbb0ce2b254 upstream. According to reference mannual CCGR77(usb) sources from hsio_axi, fix it. Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* igc: Enable PCIe PTMVinicius Costa Gomes2022-06-221-0/+5
| | | | | | | | | | | | | | | | | | | | | commit 1b5d73fb862414106cf270a1a7300ce8ae77de83 upstream. Enables PCIe PTM (Precision Time Measurement) support in the igc driver. Notifies the PCI devices that PCIe PTM should be enabled. PCIe PTM is similar protocol to PTP (Precision Time Protocol) running in the PCIe fabric, it allows devices to report time measurements from their internal clocks and the correlation with the PCIe root clock. The i225 NIC exposes some registers that expose those time measurements, those registers will be used, in later patches, to implement the PTP_SYS_OFFSET_PRECISE ioctl(). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "PCI: Make pci_enable_ptm() private"Vinicius Costa Gomes2022-06-221-3/+0
| | | | | | | | | | | | | | | | | commit 1d71eb53e45187f58089d32b51e27784c791d90e upstream. Make pci_enable_ptm() accessible from the drivers. Exposing this to the driver enables the driver to use the 'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not. This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private"). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* virtio-pci: Remove wrong address verification in vp_del_vqs()Murilo Opsfelder Araujo2022-06-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7e415282b41bf0d15c6e0fe268f822d9b083f2f7 upstream. GCC 12 enhanced -Waddress when comparing array address to null [0], which warns: drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’: drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress] 257 | if (vp_dev->msix_affinity_masks[i]) | ^~~~~~ In fact, the verification is comparing the result of a pointer arithmetic, the address "msix_affinity_masks + i", which will always evaluate to true. Under the hood, free_cpumask_var() calls kfree(), which is safe to pass NULL, not requiring non-null verification. So remove the verification to make compiler happy (happy compiler, happy life). [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103 Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Christophe de Dinechin <dinechin@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amd/display: Cap OLED brightness per max frame-average luminanceRoman Li2022-06-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit 4fd17f2ac0aa4e48823ac2ede5b050fb70300bf4 upstream. [Why] For OLED eDP the Display Manager uses max_cll value as a limit for brightness control. max_cll defines the content light luminance for individual pixel. Whereas max_fall defines frame-average level luminance. The user may not observe the difference in brightness in between max_fall and max_cll. That negatively impacts the user experience. [How] Use max_fall value instead of max_cll as a limit for brightness control. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm mirror log: round up region bitmap size to BITS_PER_LONGMikulas Patocka2022-06-221-2/+1
| | | | | | | | | | | | | | | | | | | commit 85e123c27d5cbc22cfdc01de1e2ca1d9003a02d0 upstream. The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan. Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen2022-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit be03b0651ffd8bab69dfd574c6818b446c0753ce upstream. Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probeMiaoqian Lin2022-06-221-0/+1
| | | | | | | | | | | | | | | commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Cc: stable <stable@kernel.org> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Fix memory leak in dwc2_hcd_initMiaoqian Lin2022-06-221-1/+1
| | | | | | | | | | | | | | | | commit 3755278f078460b021cd0384562977bf2039a57a upstream. usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: io_ti: add Agilent E5805A supportRobert Eckelmann2022-06-222-0/+3
| | | | | | | | | | | | commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream. Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti. Signed-off-by: Robert Eckelmann <longnoserob@gmail.com> Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add support for Cinterion MV31 with new baselineSlark Xiao2022-06-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream. Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. Below is test evidence: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b8 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B8 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option For PID 00b8, interface 3 is GNSS port which don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com [ johan: rename defines using a "2" infix ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* comedi: vmk80xx: fix expression for tx buffer sizeIan Abbott2022-06-221-1/+1
| | | | | | | | | | | | | | | | commit 242439f7e279d86b3f73b5de724bc67b2f8aeb07 upstream. The expression for setting the size of the allocated bulk TX buffer (`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`, which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it. Fixes: a23461c47482 ("comedi: vmk80xx: fix transfer-buffer overflow") Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 4.9+ Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: add raptor lake point S DIDAlexander Usyskin2022-06-222-0/+4
| | | | | | | | | | | | commit 3ed8c7d39cfef831fe508fc1308f146912fa72e6 upstream. Add Raptor (Point) Lake S device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20220606144225.282375-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: designware: Use standard optional ref clock implementationSerge Semin2022-06-222-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 27071b5cbca59d8e8f8750c199a6cbf8c9799963 ] Even though the DW I2C controller reference clock source is requested by the method devm_clk_get() with non-optional clock requirement the way the clock handler is used afterwards has a pure optional clock semantic (though in some circumstances we can get a warning about the clock missing printed in the system console). There is no point in reimplementing that functionality seeing the kernel clock framework already supports the optional interface from scratch. Thus let's convert the platform driver to using it. Note by providing this commit we get to fix two problems. The first one was introduced in commit c62ebb3d5f0d ("i2c: designware: Add support for an interface clock"). It causes not having the interface clock (pclk) enabled/disabled in case if the reference clock isn't provided. The second problem was first introduced in commit b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided"). Since that modification the deferred probe procedure has been unsupported in case if the interface clock isn't ready. Fixes: c62ebb3d5f0d ("i2c: designware: Add support for an interface clock") Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitionsMiaoqian Lin2022-06-221-1/+4
| | | | | | | | | | | | | | [ Upstream commit fa1ad9d4cc47ca2470cd904ad4519f05d7e43a2b ] of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-6-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitionsMiaoqian Lin2022-06-221-1/+1
| | | | | | | | | | | | | | | [ Upstream commit ec8401a429ffee34ccf38cebf3443f8d5ae6cb0d ] of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. When kcalloc fails, it missing of_node_put() and results in refcount leak. Fix this by goto out_put_node label. Fixes: 52085d3f2028 ("irqchip/gic-v3: Dynamically allocate PPI partition descriptors") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-5-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* irqchip/gic/realview: Fix refcount leak in realview_gic_of_initMiaoqian Lin2022-06-221-0/+1
| | | | | | | | | | | | | | [ Upstream commit f4b98e314888cc51486421bcf6d52852452ea48b ] of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 82b0a434b436 ("irqchip/gic/realview: Support more RealView DCC variants") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* i2c: npcm7xx: Add check for platform_driver_registerJiasheng Jiang2022-06-221-2/+1
| | | | | | | | | | | | | | [ Upstream commit 6ba12b56b9b844b83ed54fb7ed59fb0eb41e4045 ] As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET2022-06-221-1/+0
| | | | | | | | | | | | | | | | [ Upstream commit d7dd6eccfbc95ac47a12396f84e7e1b361db654b ] 'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata2022-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4b7a632ac4e7101ceefee8484d5c2ca505d347b3 ] Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nvme: add device name to warning in uuid_show()Thomas Weißschuh2022-06-221-2/+2
| | | | | | | | | | | | | | | | | | | [ Upstream commit 1fc766b5c08417248e0008bca14c3572ac0f1c26 ] This provides more context to users. Old message: [ 00.000000] No UUID available providing old NGUID New message: [ 00.000000] block nvme0n1: No UUID available providing old NGUID Fixes: d934f9848a77 ("nvme: provide UUID value to userspace") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nvme: use sysfs_emit instead of sprintfDaniel Wagner2022-06-222-24/+24
| | | | | | | | | | | | | [ Upstream commit bff4bcf3cfc1595e0ef2aeb774b2403c88de1486 ] sysfs_emit is the recommended API to use for formatting strings to be returned to user space. It is equivalent to scnprintf and aware of the PAGE_SIZE buffer size. Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/i915/reset: Fix error_state_read ptr + offset useAlan Previn2022-06-221-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c9b576d0c7bf55aeae1a736da7974fa202c4394d ] Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me mei fuse ip_tables x_tables crct10dif_pclmul e1000e crc32_pclmul ptp i2c_i801 ghash_clmulni_intel i2c_smbus pps_core [last unloa ded: ttm] [ 5590.803277] CR2: ffffffffa0b0e000 [ 5590.803280] ---[ end trace 0000000000000000 ]--- Fixes: 0e39037b3165 ("drm/i915: Cache the error string") Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311004311.514198-2-alan.previn.teres.alexis@intel.com (cherry picked from commit 3304033a1e69cd81a2044b4422f0d7e593afb4e6) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* misc: atmel-ssc: Fix IRQ check in ssc_probeMiaoqian Lin2022-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 1c245358ce0b13669f6d1625f7a4e05c41f28980 ] platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: eb1f2930609b ("Driver for the Atmel on-chip SSC on AT32AP and AT91") Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220601123026.7119-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tty: goldfish: Fix free_irq() on removeVincent Whitchurch2022-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 499e13aac6c762e1e828172b0f0f5275651d6512 ] Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... Fixes: 465893e18878e119 ("tty: goldfish: support platform_device with id -1") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Drivers: hv: vmbus: Release cpu lock in error caseSaurabh Sengar2022-06-221-0/+1
| | | | | | | | | | | | | [ Upstream commit 656c5ba50b7172a0ea25dc1b37606bd51d01fe8d ] In case of invalid sub channel, release cpu lock before returning. Fixes: a949e86c0d780 ("Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug") Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1654794996-13244-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov2022-06-221-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ] After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: Fix calculating the number of queue pairsGrzegorz Szczurek2022-06-221-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 0bb050670ac90a167ecfa3f9590f92966c9a3677 ] If ADQ is enabled for a VF, then actual number of queue pair is a number of currently available traffic classes for this VF. Without this change the configuration of the Rx/Tx queues fails with error. Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: Fix adding ADQ filter to TC0Grzegorz Szczurek2022-06-221-0/+5
| | | | | | | | | | | | | | | | | | [ Upstream commit c3238d36c3a2be0a29a9d848d6c51e1b14be6692 ] Procedure of configure tc flower filters erroneously allows to create filters on TC0 where unfiltered packets are also directed by default. Issue was caused by insufficient checks of hw_tc parameter specifying the hardware traffic class to pass matching packets to. Fix checking hw_tc parameter which blocks creation of filters on TC0. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clocksource: hyper-v: unexport __init-annotated hv_init_clocksource()Masahiro Yamada2022-06-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 245b993d8f6c4e25f19191edfbd8080b645e12b1 ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean) Fixes: dd2cb348613b ("clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220606050238.4162200-1-masahiroy@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* random: credit cpu and bootloader seeds by defaultJason A. Donenfeld2022-06-221-21/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 846bb97e131d7938847963cca00657c995b1fce1 ] This commit changes the default Kconfig values of RANDOM_TRUST_CPU and RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any existing configs or change any kernel behavior. The reason for this is several fold. As background, I recently had an email thread with the kernel maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void as recipients. I noted that some distros trust RDRAND, some trust EFI, and some trust both, and I asked why or why not. There wasn't really much of a "debate" but rather an interesting discussion of what the historical reasons have been for this, and it came up that some distros just missed the introduction of the bootloader Kconfig knob, while another didn't want to enable it until there was a boot time switch to turn it off for more concerned users (which has since been added). The result of the rather uneventful discussion is that every major Linux distro enables these two options by default. While I didn't have really too strong of an opinion going into this thread -- and I mostly wanted to learn what the distros' thinking was one way or another -- ultimately I think their choice was a decent enough one for a default option (which can be disabled at boot time). I'll try to summarize the pros and cons: Pros: - The RNG machinery gets initialized super quickly, and there's no messing around with subsequent blocking behavior. - The bootloader mechanism is used by kexec in order for the prior kernel to initialize the RNG of the next kernel, which increases the entropy available to early boot daemons of the next kernel. - Previous objections related to backdoors centered around Dual_EC_DRBG-like kleptographic systems, in which observing some amount of the output stream enables an adversary holding the right key to determine the entire output stream. This used to be a partially justified concern, because RDRAND output was mixed into the output stream in varying ways, some of which may have lacked pre-image resistance (e.g. XOR or an LFSR). But this is no longer the case. Now, all usage of RDRAND and bootloader seeds go through a cryptographic hash function. This means that the CPU would have to compute a hash pre-image, which is not considered to be feasible (otherwise the hash function would be terribly broken). - More generally, if the CPU is backdoored, the RNG is probably not the realistic vector of choice for an attacker. - These CPU or bootloader seeds are far from being the only source of entropy. Rather, there is generally a pretty huge amount of entropy, not all of which is credited, especially on CPUs that support instructions like RDRAND. In other words, assuming RDRAND outputs all zeros, an attacker would *still* have to accurately model every single other entropy source also in use. - The RNG now reseeds itself quite rapidly during boot, starting at 2 seconds, then 4, then 8, then 16, and so forth, so that other sources of entropy get used without much delay. - Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel command line, and paranoid system builders can set the Kconfig options to N, so there's no reduction or restriction of optionality. - It's a practical default. - All the distros have it set this way. Microsoft and Apple trust it too. Bandwagon. Cons: - RDRAND *could* still be backdoored with something like a fixed key or limited space serial number seed or another indexable scheme like that. (However, it's hard to imagine threat models where the CPU is backdoored like this, yet people are still okay making *any* computations with it or connecting it to networks, etc.) - RDRAND *could* be defective, rather than backdoored, and produce garbage that is in one way or another insufficient for crypto. - Suggesting a *reduction* in paranoia, as this commit effectively does, may cause some to question my personal integrity as a "security person". - Bootloader seeds and RDRAND are generally very difficult if not all together impossible to audit. Keep in mind that this doesn't actually change any behavior. This is just a change in the default Kconfig value. The distros already are shipping kernels that set things this way. Ard made an additional argument in [1]: We're at the mercy of firmware and micro-architecture anyway, given that we are also relying on it to ensure that every instruction in the kernel's executable image has been faithfully copied to memory, and that the CPU implements those instructions as documented. So I don't think firmware or ISA bugs related to RNGs deserve special treatment - if they are broken, we should quirk around them like we usually do. So enabling these by default is a step in the right direction IMHO. In [2], Phil pointed out that having this disabled masked a bug that CI otherwise would have caught: A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the static key warning (but it does go on to boot). The significant difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y defining that on top of multi_v7_defconfig demonstrates the issue on a clean 5.15.45. Conversely, not setting that option in a downstream kernel build avoids the warning [1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/ [2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/ Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gpio: dwapb: Don't print error on -EPROBE_DEFERSerge Semin2022-06-221-4/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 77006f6edc0e0f58617eb25e53731f78641e820d ] Currently if the APB or Debounce clocks aren't yet ready to be requested the DW GPIO driver will correctly handle that by deferring the probe procedure, but the error is still printed to the system log. It needlessly pollutes the log since there was no real error but a request to postpone the clock request procedure since the clocks subsystem hasn't been fully initialized yet. Let's fix that by using the dev_err_probe method to print the APB/clock request error status. It will correctly handle the deferred probe situation and print the error if it actually happens. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
* MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.Yupeng Li2022-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 41e456400212803704e82691716e1d7b0865114a ] set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp undefined error,fix cpu_hwmon compile options to be bool.Some kernel compilation error information is as follows: Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC [M] drivers/platform/mips/cpu_hwmon.o Building modules, stage 2. MODPOST 200 modules ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined! ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1 make: *** [Makefile:1261：modules] 错误 2 Signed-off-by: Yupeng Li <liyupeng@zbhlos.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* mellanox: mlx5: avoid uninitialized variable warning with gcc-12Linus Torvalds2022-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 842c3b3ddc5f4d17275edbaa09e23d712bf8b915 ] gcc-12 started warning about 'tracker' being used uninitialized: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized] 786 | struct lag_tracker tracker; | ^~~~~~~ which seems to be because it doesn't track how the use (and initialization) is bound by the 'do_bond' flag. But admittedly that 'do_bond' usage is fairly complicated, and involves passing it around as an argument to helper functions, so it's somewhat understandable that gcc doesn't see how that all works. This function could be rewritten to make the use of that tracker variable more obviously safe, but for now I'm just adding the forced initialization of it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface ↵Chen Lin2022-06-221-2/+19
| | | | | | | | | | | | | | | | | | netdev[napi]_alloc_frag [ Upstream commit 2f2c0d2919a14002760f89f4e02960c735a316d2 ] When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by: Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferredXiaohui Zhang2022-06-221-2/+14
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ] Similar to the handling of play_deferred in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling. Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failedchengkaitao2022-06-221-0/+1
| | | | | | | | | | | | | [ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ] The reference must be released when device_register(&vm_cmdline_parent) failed. Add the corresponding 'put_device()' in the error handling path. Signed-off-by: chengkaitao <pilgrimtao@gmail.com> Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: pmcraid: Fix missing resource cleanup in error caseChengguang Xu2022-06-221-1/+1
| | | | | | | | | | | | | [ Upstream commit ec1e8adcbdf661c57c395bca342945f4f815add7 ] Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: ipr: Fix missing/incorrect resource cleanup in error caseChengguang Xu2022-06-221-2/+2
| | | | | | | | | | | | | | | | [ Upstream commit d64c491911322af1dcada98e5b9ee0d87e8c8fee ] Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completionJames Smart2022-06-222-2/+12
| | | | | | | | | | | | | | | | | [ Upstream commit 2e7e9c0c1ec05f18d320ecc8a31eec59d2af1af9 ] NVMe Asynchronous Event Request commands have no command timeout value per specifications. Set WQE option to allow a reduced FLUSH polling rate for I/O error detection specifically for nvme_admin_async_event commands. Link: https://lore.kernel.org/r/20220603174329.63777-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topologyJames Smart2022-06-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 336d63615466b4c06b9401c987813fd19bdde39b ] After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: vmw_pvscsi: Expand vcpuHint to 16 bitsWentao Wang2022-06-221-2/+2
| | | | | | | | | | | | | | [ Upstream commit cf71d59c2eceadfcde0fb52e237990a0909880d7 ] vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com Signed-off-by: Wentao Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch2022-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | dmi_use_low_level_irq [ Upstream commit 6ab2e51898cd4343bbdf8587af8ce8fbabddbcb5 ] Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()Sergey Shtylyov2022-06-221-2/+2
| | | | | | | | | | | | | | | | | [ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ] In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale DataPawan Gupta2022-06-161-0/+8
| | | | | | | | | | | | | commit 8d50cdf8b8341770bc6367bce40c0c1bb0e1d5b3 upstream Add the sysfs reporting file for Processor MMIO Stale Data vulnerability. It exposes the vulnerability and mitigation state similar to the existing files for the other hardware vulnerabilities. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dmaengine: idxd: add missing callback function to support DMA_INTERRUPTDave Jiang2022-06-141-0/+22
| | | | | | | | | | | | | | | commit 2112b8f4fb5cc35d1c384324763765953186b81f upstream. When setting DMA_INTERRUPT capability, a callback function dma->device_prep_dma_interrupt() is needed to support this capability. Without setting the callback, dma_async_device_register() will fail dma capability check. Fixes: 4e5a4eb20393 ("dmaengine: idxd: set DMA_INTERRUPT cap bit") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/165101232637.3951447.15765792791591763119.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: qcom: Fix pipe clock imbalanceJohan Hovold2022-06-141-6/+0
| | | | | | | | | | | | | | | | | | | | | commit fdf6a2f533115ec5d4d9629178f8196331f1ac50 upstream. Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller"), which enables the pipe clock both in init() and in post_init() but only disables in post_deinit(). Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable. Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* md/raid0: Ignore RAID0 layout if the second zone has only one devicePascal Hambourg2022-06-141-15/+16
| | | | | | | | | | | | | | | | | commit ea23994edc4169bd90d7a9b5908c6ccefd82fa40 upstream. The RAID0 layout is irrelevant if all members have the same size so the array has only one zone. It is *also* irrelevant if the array has two zones and the second zone has only one device, for example if the array has two members of different sizes. So in that case it makes sense to allow assembly even when the layout is undefined, like what is done when the array has only one zone. Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* interconnect: Restore sync state by ignoring ipa-virt in provider countStephen Boyd2022-06-141-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 20ce30fb4750f2ffc130cdcb26232b1dd87cd0a5 upstream. Ignore compatible strings for the IPA virt drivers that were removed in commits 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") and 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") so that the sync state logic can kick in again. Otherwise all the interconnects in the system will stay pegged at max speeds because 'providers_count' is always going to be one larger than the number of drivers that will ever probe on sc7180 or sdx55. This fixes suspend on sc7180 and sdx55 devices when you don't have a devicetree patch to remove the ipa-virt compatible node. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Cc: <stable@vger.kernel.org> # 5.10.x Fixes: 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") Fixes: 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* interconnect: qcom: sc7180: Drop IP0 interconnectsStephen Boyd2022-06-141-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2f3724930eb4bba74f7d10bc3bef5bb22dd323df upstream. The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and modeled as a clk, but this interconnect driver still had it modeled as an interconnect. This was mostly OK because nobody used the interconnect definition, until the interconnect framework started dropping bandwidth requests on interconnects that aren't used via the sync_state callback in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once that patch was applied the IP0 resource was going to be controlled from two places, the clk framework and the interconnect framework. Even then, things were probably going to be OK, because commit b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") was needed to actually drop bandwidth requests on unused interconnects, of which the IPA was one of the interconnect that wasn't getting dropped to zero. Combining the three commits together leads to bad behavior where the interconnect framework is disabling the IP0 resource because it has no users while the clk framework thinks the IP0 resource is on because the only user, the IPA driver, has turned it on via clk_prepare_enable(). Depending on when sync_state is called, we can get into a situation like below: IPA driver probes IPA driver gets notified modem started runtime PM get() IPA clk enabled -> IP0 resource is ON sync_state runs interconnect zeroes out the IP0 resource -> IP0 resource is off IPA driver tries to access a register and blows up The crash is an unclocked access that manifest as an SError. SError Interrupt on CPU0, code 0xbe000011 -- SError CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x4c/0x80 lr : mutex_lock+0x30/0x80 sp : ffffffc00da9b9c0 x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000 x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8 x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00 x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000 x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080 x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28 x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace+0xf4/0x114 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 panic+0x150/0x38c nmi_panic+0x88/0xa0 arm64_serror_panic+0x74/0x80 do_serror+0x0/0x80 do_serror+0x58/0x80 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x78/0x7c mutex_lock+0x4c/0x80 __gsi_channel_start+0x50/0x17c gsi_channel_start+0x54/0x90 ipa_endpoint_enable_one+0x34/0xc0 ipa_open+0x4c/0x120 Remove all IP0 resource management from the interconnect driver so that clk-rpmh is the sole owner. This fixes the issue by preventing the interconnect driver from overwriting the IP0 resource data that the clk-rpmh driver wrote. Cc: Alex Elder <elder@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Cc: <stable@vger.kernel.org> # 5.10.x Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Alex Elder <elder@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-16 12:03:51 +0000