summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
...
* USB: serial: qcserial: add EM9191 QDL supportAleksander Morgado2021-10-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream. When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen2021-10-201-0/+2
| | | | | | | | | | | | | commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: dsps: Fix the probe error pathMiquel Raynal2021-10-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c2115b2b16421d93d4993f3fe4c520e91d6fe801 upstream. Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock()Zhang Jianhua2021-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 38fa3206bf441911258e5001ac8b6738693f8d82 upstream. While reboot the system by sysrq, the following bug will be occur. BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:90 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 10052, name: rc.shutdown CPU: 3 PID: 10052 Comm: rc.shutdown Tainted: G W O 5.10.0 #1 Call trace: dump_backtrace+0x0/0x1c8 show_stack+0x18/0x28 dump_stack+0xd0/0x110 ___might_sleep+0x14c/0x160 __might_sleep+0x74/0x88 down_interruptible+0x40/0x118 virt_efi_reset_system+0x3c/0xd0 efi_reboot+0xd4/0x11c machine_restart+0x60/0x9c emergency_restart+0x1c/0x2c sysrq_handle_reboot+0x1c/0x2c __handle_sysrq+0xd0/0x194 write_sysrq_trigger+0xbc/0xe4 proc_reg_write+0xd4/0xf0 vfs_write+0xa8/0x148 ksys_write+0x6c/0xd8 __arm64_sys_write+0x18/0x28 el0_svc_common.constprop.3+0xe4/0x16c do_el0_svc+0x1c/0x2c el0_svc+0x20/0x30 el0_sync_handler+0x80/0x17c el0_sync+0x158/0x180 The reason for this problem is that irq has been disabled in machine_restart() and then it calls down_interruptible() in virt_efi_reset_system(), which would occur sleep in irq context, it is dangerous! Commit 99409b935c9a("locking/semaphore: Add might_sleep() to down_*() family") add might_sleep() in down_interruptible(), so the bug info is here. down_trylock() can solve this problem, cause there is no might_sleep. -------- Cc: <stable@vger.kernel.org> Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* efi/cper: use stack buffer for error record decodingArd Biesheuvel2021-10-201-2/+2
| | | | | | | | | | | | | | | commit b3a72ca80351917cc23f9e24c35f3c3979d3c121 upstream. Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it. Cc: <stable@vger.kernel.org> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cb710: avoid NULL pointer subtractionArnd Bergmann2021-10-201-1/+1
| | | | | | | | | | | | | | | | | | commit 42641042c10c757fe10cc09088cf3f436cec5007 upstream. clang-14 complains about an unusual way of converting a pointer to an integer: drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction] return ((ptr - NULL) & 3) != 0; Replace this with a normal cast to uintptr_t. Fixes: 5f5bac8272be ("mmc: Driver for CB710/720 memory card reader (MMC part)") Cc: stable <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Enable trust tx length quirk for Fresco FL11 USB controllerNikolay Martynov2021-10-201-0/+2
| | | | | | | | | | | | | | | | | commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix command ring pointer corruption while aborting a commandPavankumar Kondeti2021-10-201-4/+10
| | | | | | | | | | | | | | | | | | | | | | | commit ff0e50d3564f33b7f4b35cadeabd951d66cfc570 upstream. The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: guard accesses to ep_state in xhci_endpoint_reset()Jonathan Bell2021-10-201-0/+5
| | | | | | | | | | | | | | | | commit a01ba2a3378be85538e0183ae5367c1bc1d5aaf3 upstream. See https://github.com/raspberrypi/linux/issues/3981 Two read-modify-write cycles on ep->ep_state are not guarded by xhci->lock. Fix these. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: me: add Ice Lake-N device id.Andy Shevchenko2021-10-202-0/+2
| | | | | | | | | | | | | | | commit 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 upstream. Add Ice Lake-N device ID. The device can be found on MacBookPro16,2 [1]. [1]: https://linux-hardware.org/?probe=f1c5cf0c43 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211001173644.16068-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* watchdog: orion: use 0 for unset heartbeatChris Packham2021-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit bb914088bd8a91c382f54d469367b2e5508b5493 upstream. If the heartbeat module param is not specified we would get an error message watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range watchdog: f1020300.watchdog: falling back to default timeout (171) This is because we were initialising heartbeat to -1. By removing the initialisation (thus letting the C run time initialise it to 0) we silence the warning message and the default timeout is still used. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"Colin Ian King2021-10-171-2/+2
| | | | | | | | | | | | [ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ] There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: ses: Fix unsigned comparison with less than zeroJiapeng Chong2021-10-171-1/+1
| | | | | | | | | | | | | | | [ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ] Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/amdgpu: fix gart.bo pin_count leakLeslie Shi2021-10-172-2/+4
| | | | | | | | | | | | | | | [ Upstream commit 66805763a97f8f7bdf742fc0851d85c02ed9411f ] gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: sun: SUNVNET_COMMON should depend on INETRandy Dunlap2021-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 103bde372f084206c6972be543ecc247ebbff9f3 ] When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aaron Young <aaron.young@oracle.com> Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDsJoshua-Dickens2021-10-171-0/+8
| | | | | | | | | | | | [ Upstream commit 0c8fbaa553077630e8eae45bd9676cfc01836aeb ] Add the new PIDs to wacom_wac.c to support the new models in the Intuos series. [jkosina@suse.cz: fix changelog] Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JISMizuho Mori2021-10-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ] Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid/<dev>/rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori <morimolymoly@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: phy: bcm7xxx: Fixed indirect MMD operationsFlorian Fainelli2021-10-171-4/+110
| | | | | | | | | | | | | | | | | | | | commit d88fd1b546ff19c8040cfaea76bf16aed1c5a0bb upstream. When EEE support was added to the 28nm EPHY it was assumed that it would be able to support the standard clause 45 over clause 22 register access method. It turns out that the PHY does not support that, which is the very reason for using the indirect shadow mode 2 bank 3 access method. Implement {read,write}_mmd to allow the standard PHY library routines pertaining to EEE querying and configuration to work correctly on these PHYs. This forces us to implement a __phy_set_clr_bits() function that does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd functions are always called with that lock held. Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i2c: acpi: fix resource leak in reconfiguration device additionJamie Iles2021-10-131-0/+1
| | | | | | | | | | | | | | | | | [ Upstream commit 6558b646ce1c2a872fe1c2c7cb116f05a2c1950f ] acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: fixed title] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: Fix freeing of uninitialized misc IRQ vectorSylwester Dziedziuch2021-10-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2e5a20573a926302b233b0c2e1077f5debc7ab2e ] When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. Fixes: c17401a1dd21 ("i40e: use separate state bit for miscellaneous IRQ setup") Reported-by: PJ Waskiewicz <pwaskiewicz@jumptrading.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i40e: fix endless loop under rtnlJiri Benc2021-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 857b6c6f665cca9828396d9743faf37fd09e9ac3 ] The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc86895 ("i40e: init code and hardware support") Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gve: fix gve_get_stats()Eric Dumazet2021-10-131-4/+9
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2f57d4975fa027eabd35fdf23a49f8222ef3abf2 ] gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry() returns true. What is needed here is to sample values in temporary variables, and only use them after each loop is ended. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Catherine Sullivan <csully@google.com> Cc: Sagi Shahar <sagis@google.com> Cc: Jon Olson <jonolson@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Luigi Rizzo <lrizzo@google.com> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Tao Liu <xliutaox@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gve: Correct available tx qpl checkCatherine Sullivan2021-10-131-1/+1
| | | | | | | | | | | | | [ Upstream commit d03477ee10f4bc35d3573cf1823814378ef2dca2 ] The qpl_map_size is rounded up to a multiple of sizeof(long), but the number of qpls doesn't have to be. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/nouveau/debugfs: fix file release memory leakYang Yingliang2021-10-131-0/+1
| | | | | | | | | | | | | | | | [ Upstream commit f5a8703a9c418c6fc54eb772712dfe7641e3991c ] When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* video: fbdev: gbefb: Only instantiate device when built for IP32Mark Brown2021-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 11b8e2bb986d23157e82e267fb8cc6b281dfdee9 ] The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893Tony Lindgren2021-10-131-0/+3
| | | | | | | | | | | | | | | | [ Upstream commit b13a270ace2e4c70653aa1d1d0394c553905802f ] Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in addition to dcan2 for errata i893 handling. Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods" dts property is used with related dcan hwmod data. This should be only needed if anybody needs to git bisect earlier stable trees though. Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: sfp: Fix typo in state machine debug stringSean Anderson2021-10-131-1/+1
| | | | | | | | | | | | [ Upstream commit 25a9da6641f1f66006e93ddbefee13a437efa8c0 ] The string should be "tx_disable" to match the state enum. Fixes: 4005a7cb4f55 ("net: phy: sftp: print debug message with text, not numbers") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ptp_pch: Load module automatically if ID matchesAndy Shevchenko2021-10-131-0/+1
| | | | | | | | | | | | | [ Upstream commit 7cd8b1542a7ba0720c5a0a85ed414a122015228b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Fixes: 863d08ece9bf ("supports eg20t ptp clock") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* phy: mdio: fix memory leakPavel Skripkin2021-10-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ca6e11c337daf7925ff8a2aac8e84490a8691905 ] Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/ Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* soc: qcom: mdt_loader: Drop PT_LOAD check on hash segmentShawn Guo2021-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 833d51d7c66d6708abbc02398892b96b950167b9 ] PT_LOAD type denotes that the segment should be loaded into the final firmware memory region. Hash segment is not one such, because it's only needed for PAS init and shouldn't be in the final firmware memory region. That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and hash segment. This actually makes the hash segment type check in qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment, it won't be loaded into firmware memory region anyway, due to the QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD type for some reason (misusing or abusing?). Some firmware files on Sony phones are such examples, e.g WCNSS firmware of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD. Drop the unnecessary hash segment type check in qcom_mdt_read_metadata() to fix firmware loading failure on these phones, while hash segment is still kept away from the final firmware memory region. Fixes: 498b98e93900 ("soc: qcom: mdt_loader: Support loading non-split images") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* soc: qcom: socinfo: Fixed argument passed to platform_set_data()Antonio Martorana2021-10-131-1/+1
| | | | | | | | | | | | | | | [ Upstream commit 9c5a4ec69bbf5951f84ada9e0db9c6c50de61808 ] Set qcom_socinfo pointer as data being stored instead of pointer to soc_device structure. Aligns with future calls to platform_get_data() which expects qcom_socinfo pointer. Fixes: efb448d0a3fc ("soc: qcom: Add socinfo driver") Signed-off-by: Antonio Martorana <amartora@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1629159879-95777-1-git-send-email-amartora@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xen/balloon: fix cancelled balloon actionJuergen Gross2021-10-131-6/+15
| | | | | | | | | | | | | | | | | | | | | commit 319933a80fd4f07122466a77f93e5019d71be74c upstream. In case a ballooning action is cancelled the new kernel thread handling the ballooning might end up in a busy loop. Fix that by handling the cancelled action gracefully. While at it introduce a short wait for the BP_WAIT case. Cc: stable@vger.kernel.org Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20211005133433.32008-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirkNeil Armstrong2021-10-131-14/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 8a38a4d51c5055d0201542e5ea3c0cb287f6e223 upstream. The memory at the end of the controller only accepts 32bit read/write accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit (which will be split into two 32bit access) and 8bit leading to incomplete copies to/from this memory when the buffer is not multiple of 8bytes. Add a local copy using writel/readl accesses to make sure we use the right memory access width. The switch to memcpy_to/fromio was done because of 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy worked before since it mainly used 32bit memory acceses. Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen/privcmd: fix error handling in mmap-resource processingJan Beulich2021-10-131-3/+4
| | | | | | | | | | | | | | | | | | commit e11423d6721dd63b23fb41ade5e8d0b448b17780 upstream. xen_pfn_t is the same size as int only on 32-bit builds (and not even on Arm32). Hence pfns[] can't be used directly to read individual error values returned from xen_remap_domain_mfn_array(); every other error indicator would be skipped/ignored on 64-bit. Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/aa6d6a67-6889-338a-a910-51e889f792d5@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* usb: typec: tcpm: handle SRC_STARTUP state if cc changesXu Yang2021-10-131-0/+1
| | | | | | | | | | | | | | | | | | | | commit 6d91017a295e9790eec02c4e43f020cdb55f5d98 upstream. TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state which is not satisfied with the Type-C spec. Per Type-C spec: DRP port should move to Unattached.SNK instead of Unattached.SRC if sink removed. Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20210928111639.3854174-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix break reportingJohan Hovold2021-10-131-0/+3
| | | | | | | | | | | | | | | | commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream. A recent change that started reporting break events forgot to push the event to the line discipline, which meant that a detected break would not be reported until further characters had been receive (the port could even have been closed and reopened in between). Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix racy tty buffer accessesJohan Hovold2021-10-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream. A recent change that started reporting break events to the line discipline caused the tty-buffer insertions to no longer be serialised by inserting events also from the completion handler for the interrupt endpoint. Completion calls for distinct endpoints are not guaranteed to be serialised. For example, in case a host-controller driver uses bottom-half completion, the interrupt and bulk-in completion handlers can end up running in parallel on two CPUs (high-and low-prio tasklets, respectively) thereby breaking the tty layer's single producer assumption. Fix this by holding the read lock also when inserting characters from the bulk endpoint. Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Partially revert "usb: Kconfig: using select for USB_COMMON dependency"Ben Hutchings2021-10-131-2/+1
| | | | | | | | | | | | | | | | commit 4d1aa9112c8e6995ef2c8a76972c9671332ccfea upstream. This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for USB_LED_TRIG. This config symbol has bool type and enables extra code in usb_common itself, not a separate driver. Enabling it should not force usb_common to be built-in! Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency") Cc: stable <stable@vger.kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Link: https://lore.kernel.org/r/20210921143442.340087-1-carnil@debian.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.Kate Hsuan2021-10-091-2/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7a8526a5cd51cf5f070310c6c37dd7293334ac49 upstream. Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Krzysztof Olędzki <ole@ans.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: ses: Retry failed Send/Receive Diagnostic commandsWen Xiong2021-10-091-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fbdac19e642899455b4e64c63aafe2325df7aafa ] Setting SCSI logging level with error=3, we saw some errors from enclosues: [108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s [108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427778] ses 0:0:9:0: Power-on or device reset occurred [108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s [108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00 [108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current] [108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred [108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1 [108017.427804] ses 0:0:9:0: Failed to bind enclosure -19 [108017.427895] ses 0:0:10:0: Attached Enclosure device [108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13 Retry if the Send/Receive Diagnostic commands complete with a transient error status (NOT_READY or UNIT_ATTENTION with ASC 0x29). Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com Reviewed-by: Brian King <brking@linux.ibm.com> Reviewed-by: James Bottomley <jejb@linux.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* usb: dwc2: check return value after calling platform_get_resource()Yang Yingliang2021-10-091-0/+4
| | | | | | | | | | | | [ Upstream commit 856e6e8e0f9300befa87dde09edb578555c99a82 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: sd: Free scsi_disk device via put_device()Ming Lei2021-10-091-4/+5
| | | | | | | | | | | | | | [ Upstream commit 265dfe8ebbabae7959060bd1c3f75c2473b697ed ] After a device is initialized via device_initialize() it should be freed via put_device(). sd_probe() currently gets this wrong, fix it up. Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xen-netback: correct success/error reporting for the SKB-with-fraglist caseJan Beulich2021-10-091-1/+1
| | | | | | | | | | | | | | | [ Upstream commit 3ede7f84c7c21f93c5eac611d60eba3f2c765e0f ] When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mdio: introduce a shutdown method to mdio device driversVladimir Oltean2021-10-091-0/+11
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cf9579976f724ad517cc15b7caadea728c7e245c ] MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* HID: usbhid: free raw_report buffers in usbhid_stopAnirudh Rayabharam2021-10-061-1/+12
| | | | | | | | | | | | | | | commit f7744fa16b96da57187dc8e5634152d3b63d72de upstream. Free the unsent raw_report buffers when the device is removed. Fixes a memory leak reported by syzbot at: https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47 Reported-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com Tested-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: betop: fix slab-out-of-bounds Write in betop_probeF.A.Sulaiman2021-10-061-3/+10
| | | | | | | | | | | | | | | | commit 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 upstream. Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk> Reviewed-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()Dan Carpenter2021-10-061-6/+8
| | | | | | | | | | | | | | | | | | | | | commit 505d9dcb0f7ddf9d075e729523a33d38642ae680 upstream. There are three bugs in this code: 1) If we ccp_init_data() fails for &src then we need to free aad. Use goto e_aad instead of goto e_ctx. 2) The label to free the &final_wa was named incorrectly as "e_tag" but it should have been "e_final_wa". One error path leaked &final_wa. 3) The &tag was leaked on one error path. In that case, I added a free before the goto because the resource was local to that block. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Allen <john.allen@amd.com> Tested-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hso: remove the bailout parameterDongliang Mu2021-10-061-3/+3
| | | | | | | | | | | | | | commit dcb713d53e2eadf42b878c12a471e74dc6ed3145 upstream. There are two invocation sites of hso_free_net_device. After refactoring hso_create_net_device, this parameter is useless. Remove the bailout in the hso_free_net_device and change the invocation sites of this function. Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hso: fix error handling code of hso_create_net_deviceDongliang Mu2021-10-061-10/+23
| | | | | | | | | | | | | | | | | | | | commit a6ecfb39ba9d7316057cea823b196b734f6b18ca upstream. The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hso: fix bailout in error case of probeOliver Neukum2021-10-061-4/+4
| | | | | | | | | | | | | | | commit 5fcfb6d0bfcda17f0d0656e4e5b3710af2bbaae5 upstream. The driver tries to reuse code for disconnect in case of a failed probe. If resources need to be freed after an error in probe, the netdev must not be freed because it has never been registered. Fix it by telling the helper which path we are in. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-15 09:33:14 +0000