summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* drm/amd/display: dchubbub p-state warning during surface planes switchhersen wu2020-08-211-2/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8b0379a85762b516c7b46aed7dbf2a4947c00564 upstream. [Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amd/display: Fix dmesg warning from setting abm levelStylon Wang2020-08-211-0/+23
| | | | | | | | | | | | | | | | | | | commit c5892a10218214d729699ab61bad6fc109baf0ce upstream. [Why] Setting abm level does not correctly update CRTC state. As a result no surface update is added to dc stream state and triggers warning. [How] Correctly update CRTC state when setting abm level property. CC: Stable <stable@vger.kernel.org> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resumeSandeep Raghuraman2020-08-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f87812284172a9809820d10143b573d833cd3f75 upstream. Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839 Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpiXin Xiong2020-08-211-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a34a0a632dd991a371fec56431d73279f9c54029 upstream. drm_dp_mst_allocate_vcpi() invokes drm_dp_mst_topology_get_port_validated(), which increases the refcount of the "port". These reference counting issues take place in two exception handling paths separately. Either when “slots” is less than 0 or when drm_dp_init_vcpi() returns a negative value, the function forgets to reduce the refcnt increased drm_dp_mst_topology_get_port_validated(), which results in a refcount leak. Fix these issues by pulling up the error handling when "slots" is less than 0, and calling drm_dp_mst_topology_put_port() before termination when drm_dp_init_vcpi() returns a negative value. Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm: Added orientation quirk for ASUS tablet model T103HAFMarius Iacob2020-08-211-0/+6
| | | | | | | | | | | commit b5ac98cbb8e5e30c34ebc837d1e5a3982d2b5f5c upstream. Signed-off-by: Marius Iacob <themariusus@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200801123445.1514567-1-themariusus@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/tidss: fix modeset init for DPI panelsTomi Valkeinen2020-08-211-1/+1
| | | | | | | | | | | | | | | | | | commit a72a6a16d51034045cb6355924b62221a8221ca3 upstream. The connector type for DISPC's DPI videoport was set the LVDS instead of DPI. This causes any DPI panel setup to fail with tidss, making all DPI panels unusable. Fix this by using correct connector type. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Fixes: 32a1795f57eecc39749017 ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org # v5.7+ Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/omap: force runtime PM suspend on system suspendTomi Valkeinen2020-08-214-0/+4
| | | | | | | | | | | | | | | | | | | | commit ecfdedd7da5d54416db5ca0f851264dca8736f59 upstream. Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM suspend and resume. We use suspend late version so that omapdrm's system suspend callback is called first, as that will disable all the display outputs after which it's safe to force DSS into suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Fixes: cef766300353 ("drm/omap: Prepare DSS for probing without legacy platform data") Cc: stable@vger.kernel.org # v5.7+ Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amdgpu: fix ordering of psp suspendAlex Deucher2020-08-211-4/+4
| | | | | | | | | | | | | | | | | The ordering of psp_tmr_terminate() and psp_asd_unload() got reversed when the patches were applied to stable. This patch does not exist in Linus' tree because the ordering is correct there. It got reversed when the patches were applied to stable. This patch is for stable only. Fixes: 22ff658396b446 ("drm/amdgpu: asd function needs to be unloaded in suspend phase") Fixes: 2c41c968c6f648 ("drm/amdgpu: add TMR destory function for psp") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.7.x Cc: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/dp_mst: Fix the DDC I2C device registration of an MST portImre Deak2020-08-211-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | commit d8bd15b37d328a935a4fc695fed8b19157503950 upstream. During the initial MST probing an MST port's I2C device will be registered using the kdev of the DRM device as a parent. Later after MST Connection Status Notifications this I2C device will be re-registered with the kdev of the port's connector. This will also move inconsistently the I2C device's sysfs entry from the DRM device's sysfs dir to the connector's dir. Fix the above by keeping the DRM kdev as the parent of the I2C device. Ideally the connector's kdev would be used as a parent, similarly to non-MST connectors, however that needs some more refactoring to ensure the connector's kdev is already available early enough. So keep the existing (initial) behavior for now. Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200607212522.16935-2-imre.deak@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/panfrost: Use kvfree() to free bo->sgtsDenis Efremov2020-08-212-2/+2
| | | | | | | | | | | | | | | | commit 114427b8927a4def2942b2b886f7e4aeae289ccb upstream. Use kvfree() to free bo->sgts, because the memory is allocated with kvmalloc_array() in panfrost_mmu_map_fault_addr(). Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Cc: stable@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200608151728.234026-1-efremov@linux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/i915/gt: Force the GT reset on shutdownChris Wilson2020-08-211-0/+5
| | | | | | | | | | | | | | | | | | | commit 7c4541a37bbbf83c0f16f779e85eb61d9348ed29 upstream. Before we return control to the system, and letting it reuse all the pages being accessed by HW, we must disable the HW. At the moment, we dare not reset the GPU if it will clobber the display, but once we know the display has been disabled, we can proceed with the reset as we shutdown the module. We know the next user must reinitialise the HW for their purpose. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/489 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200525151459.12083-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mfd: dln2: Run event handler loop under spinlockAndy Shevchenko2020-08-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3d858942250820b9adc35f963a257481d6d4c81d ] The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] <IRQ> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i2c: iproc: fix race between client unreg and isrDhananjay Phadke2020-08-211-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b1eef236f50ba6afea680da039ef3a2ca9c43d11 ] When i2c client unregisters, synchronize irq before setting iproc_i2c->slave to NULL. (1) disable_irq() (2) Mask event enable bits in control reg (3) Erase slave address (avoid further writes to rx fifo) (4) Flush tx and rx FIFOs (5) Clear pending event (interrupt) bits in status reg (6) enable_irq() (7) Set client pointer to NULL Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318 [ 371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.025098] lr : __handle_irq_event_percpu+0x6c/0x170 [ 371.030309] sp : ffff800010003e40 [ 371.033727] x29: ffff800010003e40 x28: 0000000000000060 [ 371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df [ 371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600 [ 371.050165] x23: 0000000000000003 x22: 0000000001600000 [ 371.055645] x21: ffff800010f18888 x20: 0000000001600000 [ 371.061124] x19: ffff0008f726f080 x18: 0000000000000000 [ 371.066603] x17: 0000000000000000 x16: 0000000000000000 [ 371.072082] x15: 0000000000000000 x14: 0000000000000000 [ 371.077561] x13: 0000000000000000 x12: 0000000000000001 [ 371.083040] x11: 0000000000000000 x10: 0000000000000040 [ 371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0 [ 371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000 [ 371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000 [ 371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0 [ 371.110436] x1 : 00000000c00000af x0 : 0000000000000000 [ 371.115916] Call trace: [ 371.118439] bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.122754] __handle_irq_event_percpu+0x6c/0x170 [ 371.127606] handle_irq_event_percpu+0x34/0x88 [ 371.132189] handle_irq_event+0x40/0x120 [ 371.136234] handle_fasteoi_irq+0xcc/0x1a0 [ 371.140459] generic_handle_irq+0x24/0x38 [ 371.144594] __handle_domain_irq+0x60/0xb8 [ 371.148820] gic_handle_irq+0xc0/0x158 [ 371.152687] el1_irq+0xb8/0x140 [ 371.155927] arch_cpu_idle+0x10/0x18 [ 371.159615] do_idle+0x204/0x290 [ 371.162943] cpu_startup_entry+0x24/0x60 [ 371.166990] rest_init+0xb0/0xbc [ 371.170322] arch_call_rest_init+0xc/0x14 [ 371.174458] start_kernel+0x404/0x430 Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: qcom/emac: add missed clk_disable_unprepare in error path of ↵Wang Hai2020-08-211-3/+14
| | | | | | | | | | | | | | | | emac_clks_phase1_init [ Upstream commit 50caa777a3a24d7027748e96265728ce748b41ef ] Fix the missing clk_disable_unprepare() before return from emac_clks_phase1_init() in the error handling case. Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/vmwgfx: Fix two list_for_each loop exit testsDan Carpenter2020-08-211-4/+4
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4437c1152ce0e57ab8f401aa696ea6291cc07ab1 ] These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/vmwgfx: Use correct vmw_legacy_display_unit pointerDan Carpenter2020-08-211-3/+2
| | | | | | | | | | | | | | | | [ Upstream commit 1d2c0c565bc0da25f5e899a862fb58e612b222df ] The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vdpa: Fix pointer math bug in vdpasim_get_config()Dan Carpenter2020-08-211-1/+1
| | | | | | | | | | | | | | | [ Upstream commit cf16fe9243bfa2863491026fc727618c7c593c84 ] If "offset" is non-zero then we end up copying from beyond the end of the config because of pointer math. We can fix this by casting the struct to a u8 pointer. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200406144552.GF68494@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* vdpa_sim: init iommu lockMichael S. Tsirkin2020-08-211-0/+1
| | | | | | | | | | | | | | [ Upstream commit 1e3e792650d2c0df8dd796906275b7c79e278664 ] The patch adding the iommu lock did not initialize it. The struct is zero-initialized so this is mostly a problem when using lockdep. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Max Gurtovoy <maxg@mellanox.com> Fixes: 0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Input: sentelic - fix error return when fsp_reg_write failsColin Ian King2020-08-211-1/+1
| | | | | | | | | | | | | | | [ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ] Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* md-cluster: Fix potential error pointer dereference in resize_bitmaps()Dan Carpenter2020-08-211-0/+1
| | | | | | | | | | | | | | [ Upstream commit e8abe1de43dac658dacbd04a4543e0c988a8d386 ] The error handling calls md_bitmap_free(bitmap) which checks for NULL but will Oops if we pass an error pointer. Let's set "bitmap" to NULL on this error path. Fixes: afd756286083 ("md-cluster/raid10: resize all the bitmaps before start reshape") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* watchdog: rti-wdt: balance pm runtime enable callsTero Kristo2020-08-211-0/+2
| | | | | | | | | | | | | | | [ Upstream commit d5b29c2c5ba2bd5bbdb5b744659984185d17d079 ] PM runtime should be disabled in the fail path of probe and when the driver is removed. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200717132958.14304-5-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* watchdog: initialize device before misc_registerKrzysztof Sobota2020-08-211-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cb36e29bb0e4b0c33c3d5866a0a4aebace4c99b7 ] When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetportEwan D. Milne2020-08-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit af6de8c60fe9433afa73cea6fcccdccd98ad3e5e ] We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a crash if slub_debug=FZPU is enabled. An earlier fix put put the completion on the stack, but commit 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error") subsequently changed the code to reference the completion through a pointer in the object rather than the local stack variable. Fix this by using the stack variable directly. Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com Fixes: 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error") Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attrJane Chu2020-08-211-3/+8
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7f674025d9f7321dea11b802cc0ab3f09cbe51c5 ] commit 7d988097c546 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support") adds a sysfs_notify_dirent() to wake up userspace poll thread when the "overwrite" operation has completed. But the notification is issued before the internal dimm security state and flags have been updated, so the userspace poll thread wakes up and fetches the not-yet-updated attr and falls back to sleep, forever. But if user from another terminal issue "ndctl wait-overwrite nmemX" again, the command returns instantly. Link: https://lore.kernel.org/r/1596494499-9852-3-git-send-email-jane.chu@oracle.com Fixes: 7d988097c546 ("acpi/nfit, libnvdimm/security: Add security DSM overwrite support") Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jane Chu <jane.chu@oracle.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* libnvdimm/security: fix a typoJane Chu2020-08-211-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit dad42d17558f316e9e807698cd4207359b636084 ] commit d78c620a2e82 ("libnvdimm/security: Introduce a 'frozen' attribute") introduced a typo, causing a 'nvdimm->sec.flags' update being overwritten by the subsequent update meant for 'nvdimm->sec.ext_flags'. Link: https://lore.kernel.org/r/1596494499-9852-1-git-send-email-jane.chu@oracle.com Fixes: d78c620a2e82 ("libnvdimm/security: Introduce a 'frozen' attribute") Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jane Chu <jane.chu@oracle.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: bcm2835: Do not use prediv with bcm2711's PLLsNicolas Saenz Julienne2020-08-211-4/+21
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit f34e4651ce66a754f41203284acf09b28b9dd955 ] Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL feedback loop. Bypass it by zeroing fb_prediv_mask when running on bcm2711. Note that, since the prediv configuration bits were re-purposed, this was triggering miscalculations on all clocks hanging from the VPU clock, notably the aux UART, making its output unintelligible. Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i2c: rcar: avoid race when unregistering slaveWolfram Sang2020-08-211-3/+5
| | | | | | | | | | | | | | | | | | | | [ Upstream commit c7c9e914f9a0478fba4dc6f227cfd69cf84a4063 ] Due to the lockless design of the driver, it is theoretically possible to access a NULL pointer, if a slave interrupt was running while we were unregistering the slave. To make this rock solid, disable the interrupt for a short time while we are clearing the interrupt_enable register. This patch is purely based on code inspection. The OOPS is super-hard to trigger because clearing SAR (the address) makes interrupts even more unlikely to happen as well. While here, reinit SCR to SDBS because this bit should always be set according to documentation. There is no effect, though, because the interface is disabled. Fixes: 7b814d852af6 ("i2c: rcar: avoid race when unregistering slave client") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* pwm: bcm-iproc: handle clk_get_rate() returnRayagonda Kokatanur2020-08-211-2/+7
| | | | | | | | | | | | | | [ Upstream commit 6ced5ff0be8e94871ba846dfbddf69d21363f3d7 ] Handle clk_get_rate() returning 0 to avoid possible division by zero. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nvme: fix deadlock in disconnect during scan_work and/or ana_workSagi Grimberg2020-08-218-15/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ecca390e80561debbfdb4dc96bf94595136889fa ] A deadlock happens in the following scenario with multipath: 1) scan_work(nvme0) detects a new nsid while nvme0 is an optimized path to it, path nvme1 happens to be inaccessible. 2) Before scan_work is complete nvme0 disconnect is initiated nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING 3) scan_work(1) attempts to submit IO, but nvme_path_is_optimized() observes nvme0 is not LIVE. Since nvme1 is a possible path IO is requeued and scan_work hangs. -- Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 -- 4) Delete also hangs in flush_work(ctrl->scan_work) from nvme_remove_namespaces(). Similiarly a deadlock with ana_work may happen: if ana_work has started and calls nvme_mpath_set_live and device_add_disk, it will trigger I/O. When we trigger disconnect I/O will block because our accessible (optimized) path is disconnecting, but the alternate path is inaccessible, so I/O blocks. Then disconnect tries to flush the ana_work and hangs. [ 605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core] [ 605.552087] Call Trace: [ 605.552683] __schedule+0x2b9/0x6c0 [ 605.553507] schedule+0x42/0xb0 [ 605.554201] io_schedule+0x16/0x40 [ 605.555012] do_read_cache_page+0x438/0x830 [ 605.556925] read_cache_page+0x12/0x20 [ 605.557757] read_dev_sector+0x27/0xc0 [ 605.558587] amiga_partition+0x4d/0x4c5 [ 605.561278] check_partition+0x154/0x244 [ 605.562138] rescan_partitions+0xae/0x280 [ 605.563076] __blkdev_get+0x40f/0x560 [ 605.563830] blkdev_get+0x3d/0x140 [ 605.564500] __device_add_disk+0x388/0x480 [ 605.565316] device_add_disk+0x13/0x20 [ 605.566070] nvme_mpath_set_live+0x5e/0x130 [nvme_core] [ 605.567114] nvme_update_ns_ana_state+0x2c/0x30 [nvme_core] [ 605.568197] nvme_update_ana_state+0xca/0xe0 [nvme_core] [ 605.569360] nvme_parse_ana_log+0xa1/0x180 [nvme_core] [ 605.571385] nvme_read_ana_log+0x76/0x100 [nvme_core] [ 605.572376] nvme_ana_work+0x15/0x20 [nvme_core] [ 605.573330] process_one_work+0x1db/0x380 [ 605.574144] worker_thread+0x4d/0x400 [ 605.574896] kthread+0x104/0x140 [ 605.577205] ret_from_fork+0x35/0x40 [ 605.577955] INFO: task nvme:14044 blocked for more than 120 seconds. [ 605.579239] Tainted: G OE 5.3.5-050305-generic #201910071830 [ 605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 605.582320] nvme D 0 14044 14043 0x00000000 [ 605.583424] Call Trace: [ 605.583935] __schedule+0x2b9/0x6c0 [ 605.584625] schedule+0x42/0xb0 [ 605.585290] schedule_timeout+0x203/0x2f0 [ 605.588493] wait_for_completion+0xb1/0x120 [ 605.590066] __flush_work+0x123/0x1d0 [ 605.591758] __cancel_work_timer+0x10e/0x190 [ 605.593542] cancel_work_sync+0x10/0x20 [ 605.594347] nvme_mpath_stop+0x2f/0x40 [nvme_core] [ 605.595328] nvme_stop_ctrl+0x12/0x50 [nvme_core] [ 605.596262] nvme_do_delete_ctrl+0x3f/0x90 [nvme_core] [ 605.597333] nvme_sysfs_delete+0x5c/0x70 [nvme_core] [ 605.598320] dev_attr_store+0x17/0x30 Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will indicate the phase of controller deletion where I/O cannot be allowed to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to be issued to the bottom device, and only after we flush the ana_work and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces) we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work from re-firing by aborting early if we are not LIVE, so we should be safe here. In addition, change the transport drivers to follow the updated state machine. Fixes: 0d0b660f214d ("nvme: add ANA support") Reported-by: Anton Eidelman <anton@lightbitslabs.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: clk-atlas6: fix return value check in atlas6_clk_init()Xu Wang2020-08-211-1/+1
| | | | | | | | | | | | | | | [ Upstream commit 12b90b40854a8461a02ef19f6f4474cc88d64b66 ] In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cn Acked-by: Barry Song <baohua@kernel.org> Fixes: 7bf21bc81f28 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clkKonrad Dybcio2020-08-211-0/+3
| | | | | | | | | | | | | [ Upstream commit 3386af51d3bcebcba3f7becdb1ef2e384abe90cf ] Add missing halt_check, hwcg_reg and hwcg_bit properties. These were likely omitted when porting the driver upstream. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20200726111215.22361-9-konradybcio@gmail.com Fixes: f2a76a2955c0 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM660") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* i2c: rcar: slave: only send STOP event when we have been addressedWolfram Sang2020-08-211-3/+4
| | | | | | | | | | | | | | [ Upstream commit 314139f9f0abdba61ed9a8463bbcb0bf900ac5a2 ] When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise. Fixes: de20d1857dd6 ("i2c: rcar: add slave support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VALJonathan Marek2020-08-211-2/+0
| | | | | | | | | | | | | [ Upstream commit c8b9002f44e4a1d2771b2f59f6de900864b1f9d7 ] 0x44 isn't a register offset, it is the value that goes into CAL_L_VAL. Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: qcom: gcc: fix sm8150 GPU and NPU clocksJonathan Marek2020-08-211-2/+6
| | | | | | | | | | | | | | | [ Upstream commit 667f39b59b494d96ae70f4217637db2ebbee3df0 ] Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it should be a 500us delay and not skip, however this matches what was done for other clocks that had 500us delay in downstream. Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/omap: Check for failure of a call to omap_iommu_dump_ctxColin Ian King2020-08-211-0/+3
| | | | | | | | | | | | | | | | [ Upstream commit dee9d154f40c58d02f69acdaa5cfd1eae6ebc28b ] It is possible for the call to omap_iommu_dump_ctx to return a negative error number, so check for the failure and return the error number rather than pass the negative value to simple_read_from_buffer. Fixes: 14e0e6796a0d ("OMAP: iommu: add initial debugfs support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200714192211.744776-1-colin.king@canonical.com Addresses-Coverity: ("Improper use of negative value") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: actions: Fix h_clk for Actions S500 SoCCristian Ciocaltea2020-08-211-1/+1
| | | | | | | | | | | | | | [ Upstream commit f47ee279d25fb0e010cae5d6e758e39b40eb6378 ] The h_clk clock in the Actions Semi S500 SoC clock driver has an invalid parent. Replace with the correct one. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()Ming Lei2020-08-211-3/+0
| | | | | | | | | | | | | | | | | | | | [ Upstream commit e766668c6cd49d741cfb49eaeb38998ba34d27bc ] dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't formally stop the blk-mq queue; therefore there is no point making the blk_mq_queue_stopped() check -- it will never be stopped. In addition, even though dm_stop_queue() actually tries to quiesce hw queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced() to avoid unnecessary queue quiesce isn't reliable because: the QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and dm_stop_queue() may be called when synchronize_rcu() from another blk_mq_quiesce_queue() is in-progress. Fixes: 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gpu: ipu-v3: image-convert: Wait for all EOFs before completing a tileSteve Longerbeam2020-08-211-27/+82
| | | | | | | | | | | | | | | | | [ Upstream commit dd81d821d0b3f77d949d0cac5c05c1f05b921d46 ] Use a bit-mask of EOF irqs to determine when all required idmac channel EOFs have been received for a tile conversion, and only do tile completion processing after all EOFs have been received. Otherwise it was found that a conversion would stall after the completion of a tile and the start of the next tile, because the input/read idmac channel had not completed and entered idle state, thus locking up the channel when attempting to re-start it for the next tile. Fixes: 0537db801bb01 ("gpu: ipu-v3: image-convert: reconfigure IC per tile") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlersSteve Longerbeam2020-08-211-38/+20
| | | | | | | | | | | [ Upstream commit 0f6245f42ce9b7e4d20f2cda8d5f12b55a44d7d1 ] Combine the rotate_irq() and norotate_irq() handlers into a single eof_irq() handler. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* crypto: caam - Remove broken arc4 supportHerbert Xu2020-08-212-30/+0
| | | | | | | | | | | | | | | | | | [ Upstream commit eeedb618378f8a09779546a3eeac16b000447d62 ] The arc4 algorithm requires storing state in the request context in order to allow more than one encrypt/decrypt operation. As this driver does not seem to do that, it means that using it for more than one operation is broken. Fixes: eaed71a44ad9 ("crypto: caam - add ecb(*) support") Link: https://lore.kernel.org/linux-crypto/CAMj1kXGvMe_A_iQ43Pmygg9xaAM-RLy=_M=v+eg--8xNmv9P+w@mail.gmail.com Link: https://lore.kernel.org/linux-crypto/20200702101947.682-1-ardb@kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rtc: pl031: fix set_alarm by adding back call to alarm_irq_enableSudeep Holla2020-08-211-0/+1
| | | | | | | | | | | | | | | | | | | [ Upstream commit 4df2ef85f0efe44505f511ca5e4455585f53a2da ] Commit c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64") seemed to have accidentally removed the call to pl031_alarm_irq_enable from pl031_set_alarm while switching to 64-bit apis. Let us add back the same to get the set alarm functionality back. Fixes: c8ff5841a90b ("rtc: pl031: switch to rtc_time64_to_tm/rtc_tm_to_time64") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200714124556.20294-1-sudeep.holla@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* rtw88: pci: disable aspm for platform inter-op with module parameterYan-Hsuan Chuang2020-08-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 68aa716b7dd36f55e080da9e27bc594346334c41 ] Some platforms cannot read the DBI register successfully for the ASPM settings. After the read failed, the bus could be unstable, and the device just became unavailable [1]. For those platforms, the ASPM should be disabled. But as the ASPM can help the driver to save the power consumption in power save mode, the ASPM is still needed. So, add a module parameter for them to disable it, then the device can still work, while others can benefit from the less power consumption that brings by ASPM enabled. [1] https://bugzilla.kernel.org/show_bug.cgi?id=206411 [2] Note that my lenovo T430 is the same. Fixes: 3dff7c6e3749 ("rtw88: allows to enable/disable HCI link PS mechanism") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200605074703.32726-1-yhchuang@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* mmc: renesas_sdhi_internal_dmac: clean up the code for dma completeYoshihiro Shimoda2020-08-211-5/+13
| | | | | | | | | | | | | [ Upstream commit 2b26e34e9af3fa24fa1266e9ea2d66a1f7d62dc0 ] To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* RDMA/counter: Allow manually bind QPs with different pids to same counterMark Zhang2020-08-211-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit cbeb7d896c0f296451ffa7b67e7706786b8364c8 ] In manual mode allow bind user QPs with different pids to same counter, since this is allowed in auto mode. Bind kernel QPs and user QPs to the same counter are not allowed. Fixes: 1bd8e0a9d0fd ("RDMA/counter: Allow manual mode configuration support") Link: https://lore.kernel.org/r/20200702082933.424537-4-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* RDMA/counter: Only bind user QPs in auto modeMark Zhang2020-08-211-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit c9f557421e505f75da4234a6af8eff46bc08614b ] In auto mode only bind user QPs to a dynamic counter, since this feature is mainly used for system statistic and diagnostic purpose, while there's no need to counter kernel QPs so far. Fixes: 99fa331dc862 ("RDMA/counter: Add "auto" configuration mode support") Link: https://lore.kernel.org/r/20200702082933.424537-3-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: ftdi_sio: clean up receive processingJohan Hovold2020-08-211-10/+9
| | | | | | | | | | | | | | [ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ] Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: ftdi_sio: make process-packet buffer unsignedJohan Hovold2020-08-211-11/+11
| | | | | | | | | | | [ Upstream commit ab4cc4ef6724ea588e835fc1e764c4b4407a70b7 ] Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* IB/uverbs: Set IOVA on IB MR in uverbs layerYishai Hadas2020-08-213-2/+4
| | | | | | | | | | | | | | | | [ Upstream commit 04c0a5fcfcf65aade2fb238b6336445f1a99b646 ] Set IOVA on IB MR in uverbs layer to let all drivers have it, this includes both reg/rereg MR flows. As part of this change cleaned-up this setting from the drivers that already did it by themselves in their user flows. Fixes: e6f0330106f4 ("mlx4_ib: set user mr attributes in struct ib_mr") Link: https://lore.kernel.org/r/20200630093916.332097-3-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: rockchip: rga: Only set output CSC mode for RGB inputPaul Kocialkowski2020-08-211-1/+7
| | | | | | | | | | | | | | | | | | [ Upstream commit 0f879bab72f47e8ba2421a984e7acfa763d3e84e ] Setting the output CSC mode is required for a YUV output, but must not be set when the input is also YUV. Doing this (as tested with a YUV420P to YUV420P conversion) results in wrong colors. Adapt the logic to only set the output CSC mode when the output is YUV and the input is RGB. Also add a comment to clarify the rationale. Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logicPaul Kocialkowski2020-08-212-13/+15
| | | | | | | | | | | | | | | | | [ Upstream commit ded874ece29d3fe2abd3775810a06056067eb68c ] This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB which allow quick checking of the colorspace familily of a RGA color format. These macros are then used to refactor the logic for CSC mode selection. The two nested tests for input colorspace are simplified into a single one, with a logical and, making the whole more readable. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-07 17:54:14 +0000