summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmicHans de Goede2022-02-011-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with an Intel Whiskey Cove PMIC do not use a single standard setup for the charger, fuel-gauge and other chips surrounding the PMIC / charging+data USB port. Unlike what is normal on x86 this diversity in designs is not handled by the ACPI tables. On 2 of the 3 known designs there are no standard (PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery device does not work under Linux due to it requiring non-standard and undocumented ACPI behavior. So to make things work under Linux we use native charger and fuel-gauge drivers on these devices, re-using the native drivers used on ARM boards with the same charger / fuel-gauge ICs. This requires various MFD-cell drivers for the CHT-WC PMIC cells to know which model they are exactly running on so that they can e.g. instantiate an I2C-client for the right model charger-IC (the charger is connected to an I2C-controller which is part of the PMIC). Rather then duplicating DMI-id matching to check which model we are running on in each MFD-cell driver, add a check for this to the shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a DMI table for all 3 known models: 1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models but the Pocket re-uses the GPD Win's design in a different housing: The WC PMIC is connected to a TI BQ24292i charger, paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller + a PI3USB30532 USB switch, for a fully functional Type-C port. 2. The Xiaomi Mi Pad 2: The WC PMIC is connected to a TI BQ25890 charger, paired with a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type detection, for a USB-2 only Type-C port without PD. 3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series: The WC PMIC is connected to a TI BQ25892 charger, paired with a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type detection and using the BQ25892's Mediatek Pump Express+ (1.0) support to enable charging with up to 12V through a micro-USB port. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Use the devm_regmap_field_bulk_alloc() helperHans de Goede2022-02-011-10/+4
| | | | | | | | | Use the devm_regmap_field_bulk_alloc() helper function instead of open-coding this ourselves. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Support higher charging voltages through Pump ↵Yauhen Kharuzhy2022-02-011-8/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Express+ protocol Add a "linux,pump-express-vbus-max" property which indicates if the Pump Express+ protocol should be used to increase the charging protocol. If this new property is set and a DCP charger is detected then request a higher charging voltage through the Pump Express+ protocol. So far this new property is only used on x86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Changes by Hans de Goede: - Port to my bq25890 patch-series + various cleanups - Make behavior configurable through a new "linux,pump-express-vbus-max" device-property - Sleep 1 second before re-checking the Vbus voltage after requesting it to be raised, to ensure that the ADC has time to sampled the new Vbus - Add VBUSV bq25890_tables[] entry and use it in bq25890_get_vbus_voltage() - Tweak commit message Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: On the bq25892 set the IINLIM based on external ↵Hans de Goede2022-02-011-0/+33
| | | | | | | | | | | | | | | charger detection The bq25892 does not have builtin charger-type detection like the bq25980, there might be some external charger detection capability, which will be modelled as a power_supply class-device supplying the bq25892. Use the usb_type property value from the supplier psy-device to set the input-current-limit (when available). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Add support for registering the Vbus boost converter ↵Hans de Goede2022-02-011-0/+80
| | | | | | | | | | | | | | | | | as a regulator The bq25890_charger code supports enabling/disabling the boost converter based on usb-phy notifications. But the usb-phy framework is not used on all boards/platforms. At support for registering the Vbus boost converter as a standard regulator when there is no usb-phy on the board. Also add support for providing regulator_init_data through platform_data for use on boards where device-tree is not used and the platform code must thus provide the regulator_init_data. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Add bq25890_set_otg_cfg() helperHans de Goede2022-02-011-13/+15
| | | | | | | | | Add a bq25890_set_otg_cfg() helper function, this is a preparation patch for adding regulator support. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Drop dev->platform_data == NULL checkHans de Goede2022-02-011-10/+3
| | | | | | | | | | | | | | | | | | Drop the "if (!dev->platform_data)" check, this seems to be an attempt for allowing loading the driver on devices without devicetree stemming from the initial commit of the driver (with the presumed intention being the "return -ENODEV" else branch getting replaced with something else). With the new "linux,skip-init" and "linux,read-back-settings" properties the driver can actually supports devices without devicetree and this check no longer makes sense. While at it, also switch to dev_err_probe(), which is already used in various other places in the driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Enable charging on boards where we skip resetHans de Goede2022-02-011-0/+11
| | | | | | | | | | | | | | On boards where the "linux,skip-reset" boolean property is set we don't reset the charger; and on some boards where the fw takes care of initalizition F_CHG_CFG is set to 0 before handing control over to the OS. Explicitly set F_CHG_CFG to 1 on boards where we don't reset the charger, so that charging is always enabled on these boards, like it is always enabled on boards where we do reset the charger. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Add support to read back the settings from the chipHans de Goede2022-02-011-1/+6
| | | | | | | | | | | | | | | | | On most x86/ACPI devices there is no devicetree to supply the necessary init-data. Instead the firmware already fully initializes the bq25890 charger at boot. To support this, add support for reading back the settings from the chip through a new "linux,read-back-settings" boolean. So far this new property is only used on x86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Add support to skip reset at probe() / remove()Hans de Goede2022-02-011-6/+13
| | | | | | | | | | | | | | | | | On most x86/ACPI devices the firmware already fully initializes the bq25890 charger at boot, in this case it is best to not reset it at probe() time. At support for a new "linux,skip-reset" boolean property to support this. So far this new property is only used on x86/ACPI (non devicetree) devs, IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Add a bq25890_rw_init_data() helperHans de Goede2022-02-011-22/+40
| | | | | | | | | | | | | | | | | | On most x86/ACPI devices there is no devicetree to supply the necessary init-data. Instead the firmware already fully initializes the bq25890 charger at boot. Factor out the current code to write all the init_data from devicetree into a new bq25890_rw_init_data() helper which can both write the data to the charger (the current behavior) as well as read it back from the charger into the init_data struct. This is a preparation patch for adding support for x86/ACPI device's where the init_data must be read back from the bq25890 charger. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low ↵Yauhen Kharuzhy2022-02-011-3/+26
| | | | | | | | | | | | | | | | | | | | | | | temperatures Take into account possible current reduction due to low-temperature when reading POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX. As described in the datasheet in cool (0-20° Celcius) conditions the current limit is decreased to 20% or 50% of ICHG field value depended on JEITA_ISET field. Also add NTC_FAULT field value to the debug message in bq25890_get_chip_state(). Changed by Hans de Goede: - Fix reading F_CHG_FAULT instead of F_NTC_FIELD for state->ntc_fault - Only read JEITA_ISET field if necessary - Tweak commit message a bit Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: bq25890: Rename IILIM field to IINLIMYauhen Kharuzhy2022-02-011-6/+6
| | | | | | | | | | | | Rename the Input Current Limit field in the REG00 from IILIM to IINLIM accordingly with the bq2589x datasheet. This is just cosmetical change to reduce confusion. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* power: supply: core: Refactor ↵Hans de Goede2022-02-012-28/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | power_supply_set_input_current_limit_from_supplier() Some (USB) charger ICs have variants with USB D+ and D- pins to do their own builtin charger-type detection, like e.g. the bq24190 and bq25890 and also variants which lack this functionality, e.g. the bq24192 and bq25892. In case the charger-type; and thus the input-current-limit detection is done outside the charger IC then we need some way to communicate this to the charger IC. In the past extcon was used for this, but if the external detection does e.g. full USB PD negotiation then the extcon cable-types do not convey enough information. For these setups it was decided to model the external charging "brick" and the parameters negotiated with it as a power_supply class-device itself; and power_supply_set_input_current_limit_from_supplier() was introduced to allow drivers to get the input-current-limit this way. But in some cases psy drivers may want to know other properties, e.g. the bq25892 can do "quick-charge" negotiation by pulsing its current draw, but this should only be done if the usb_type psy-property of its supplier is set to DCP (and device-properties indicate the board allows higher voltages). Instead of adding extra helper functions for each property which a psy-driver wants to query from its supplier, refactor power_supply_set_input_current_limit_from_supplier() into a more generic power_supply_get_property_from_supplier() function. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds2022-01-2316-31/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
| * bitmap: unify find_bit operationsYury Norov2022-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | bitmap_for_each_{set,clear}_region() are similar to for_each_bit() macros in include/linux/find.h, but interface and implementation of them are different. This patch adds for_each_bitrange() macros and drops unused bitmap_*_region() API in sake of unification. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Dennis Zhou <dennis@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
| * Replace for_each_*_bit_from() with for_each_*_bit() where appropriateYury Norov2022-01-152-4/+3
| | | | | | | | | | | | | | | | | | | | A couple of kernel functions call for_each_*_bit_from() with start bit equal to 0. Replace them with for_each_*_bit(). No functional changes, but might improve on readability. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
| * cpumask: replace cpumask_next_* with cpumask_first_* where appropriateYury Norov2022-01-153-3/+3
| | | | | | | | | | | | | | | | | | | | | | cpumask_first() is a more effective analogue of 'next' version if n == -1 (which means start == 0). This patch replaces 'next' with 'first' where things look trivial. There's no cpumask_first_zero() function, so create it. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
| * all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriateYury Norov2022-01-1511-24/+23
| | | | | | | | | | | | | | | | | | find_first{,_zero}_bit is a more effective analogue of 'next' version if start == 0. This patch replaces 'next' with 'first' where things look trivial. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
* | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2022-01-2231-176/+190
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
| * | lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka2022-01-224-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | proc: remove PDE_DATA() completelyMuchun Song2022-01-2218-83/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | scsi/sg: move sg-big-buff sysctl to scsi/sg.cXiaoming Ni2022-01-221-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the sg-big-buff sysctl from kernel/sysctl.c to drivers/scsi/sg.c and use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: commit log update] Link: https://lkml.kernel.org/r/20211124231435.1445213-7-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | random: move the random sysctl declarations to its own fileXiaoming Ni2022-01-221-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the random sysctls to their own file and use register_sysctl_init(). [mcgrof@kernel.org: commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-3-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | firmware_loader: move firmware sysctl to its own filesXiaoming Ni2022-01-223-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2. This is the third set of patches to help address cleaning the kitchen seink in kernel/sysctl.c and to move sysctls away to where they are actually implemented / used. This patch (of 8): kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the firmware configuration sysctl table to the only place where it is used, and make it clear that if sysctls are disabled this is not used. [akpm@linux-foundation.org: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules] [akpm@linux-foundation.org: use EXPORT_SYMBOL_NS_GPL instead] [sfr@canb.auug.org.au: fix that so it compiles] Link: https://lkml.kernel.org/r/20211201160626.401d828d@canb.auug.org.au [mcgrof@kernel.org: major commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211124231435.1445213-2-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | cdrom: simplify subdirectory registration with register_sysctl()Luis Chamberlain2022-01-221-22/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-8-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | macintosh/mac_hid.c: simplify subdirectory registration with register_sysctl()Luis Chamberlain2022-01-221-23/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-4-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | i915: simplify subdirectory registration with register_sysctl()Luis Chamberlain2022-01-221-21/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-3-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | hpet: simplify subdirectory registration with register_sysctl()Luis Chamberlain2022-01-221-21/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "sysctl: second set of kernel/sysctl cleanups", v2. This is the 2nd set of kernel/sysctl.c cleanups. The diff stat should reflect how this is a much better way to deal with theses. Fortunately coccinelle can be used to ensure correctness for most of these and/or future merge conflicts. Note that since this is part of a larger effort to cleanup kernel/sysctl.c I think we have no other option but to go with merging these patches in either Andrew's tree or keep them staged in a separate tree and send a merge request later. Otherwise kernel/sysctl.c will end up becoming a sore spot for the next merge window. This patch (of 8): There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci drivers/char/hpet.c @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211123202422.819032-2-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Qing Wang <wangqing@vivo.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2022-01-2221-277/+384
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: nsp_cs: Check of ioremap return value scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl() scsi: ufs: Modify Tactive time setting conditions scsi: efct: Remove useless DMA-32 fallback configuration scsi: message: fusion: mptctl: Use dma_alloc_coherent() scsi: message: fusion: mptsas: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info() scsi: message: fusion: mptbase: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory() scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API scsi: megaraid: Avoid mismatched storage type sizes scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy() scsi: aic79xx: Remove redundant error variable scsi: pm80xx: Port reset timeout error handling correction scsi: mpi3mr: Fix formatting problems in some kernel-doc comments scsi: mpi3mr: Fix some spelling mistakes scsi: mpt3sas: Update persistent trigger pages from sysfs interface scsi: core: Fix scsi_mode_select() interface scsi: aacraid: Fix spelling of "its" scsi: qedf: Fix potential dereference of NULL pointer
| * | | scsi: nsp_cs: Check of ioremap return valueJiasheng Jiang2022-01-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since it is possible for ioremap() to fail, 'data->MmioAddress' could be NULL. Skip entry if ioremap() fails. Link: https://lore.kernel.org/r/20211230021137.1823352-1-jiasheng@iscas.ac.cn Fixes: 0e6f9d270840 ("pcmcia: use pcmcia_loop_config in scsi pcmcia drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl()Miaoqian Lin2022-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function regulator_get() returns an error pointer. Use IS_ERR() to validate the return value. Link: https://lore.kernel.org/r/20211222070930.9449-1-linmq006@gmail.com Fixes: cf137b3ea49a ("scsi: ufs-mediatek: Support VA09 regulator operations") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: ufs: Modify Tactive time setting conditionsSEO HOYOUNG2022-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Tactive time determines the waiting time before burst at hibern8 exit and is determined by hardware at linkup time. However, in the case of Samsung devices, increase host's Tactive time +100us for stability. If the HCI's Tactive time is equal or greater than the device, +100us should be set. Link: https://lore.kernel.org/r/20220106213924.186263-1-hy50.seo@samsung.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: efct: Remove useless DMA-32 fallback configurationChristophe JAILLET2022-01-101-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. While at it, return the error code returned by dma_set_mask_and_coherent() instead of -1. [1]: https://lkml.org/lkml/2021/6/7/398 Link: https://lore.kernel.org/r/958bcb2a6e86344c14f38369e8e7079615a2b0e3.1641754613.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: mptctl: Use dma_alloc_coherent()Christophe JAILLET2022-01-101-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. When memory is allocated in kbuf_alloc_2_sgl() GFP_KERNEL can be used because this function already uses the GFP_USER flag for some memory allocation and not spin_lock is taken in the between. When memory is allocated in mptctl_do_mpt_command() GFP_KERNEL can be used because this function already uses copy_from_user() and this function can sleep. When memory is allocated in mptctl_hp_hostinfo() GFP_KERNEL can be used because this function already uses mpt_config() and this function has an explicit might_sleep(). When memory is allocated in mptctl_hp_targetinfo() GFP_KERNEL can be used because this function already uses mpt_config() and this function has an explicit might_sleep(). [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Link: https://lore.kernel.org/r/516375d6d06114484533baf03aae351306100246.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: mptsas: Use dma_alloc_coherent()Christophe JAILLET2022-01-101-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. In all these places where some memory is allocated GFP_KERNEL can be used because they already call mpt_config() which has an explicit might_sleep(). [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Link: https://lore.kernel.org/r/443b81ecb08b2fe6f789bb2fdff13a53c809e401.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: Use dma_alloc_coherent() in ↵Christophe JAILLET2022-01-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mptsas_exp_repmanufacture_info() In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. The only caller of mptsas_exp_repmanufacture_info() is mptsas_probe_one_phy(). This function already calls sas_end_device_alloc() or sas_expander_alloc(). They both already use GFP_KERNEL. As no spin_lock is held at this point, it is safe to also use GFP_KERNEL here. [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Link: https://lore.kernel.org/r/d78d4a5b096897932808ed7e3a4540db1687c25d.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: mptbase: Use dma_alloc_coherent()Christophe JAILLET2022-01-101-20/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. In all these places where some memory is allocated GFP_KERNEL can be used because they already call mpt_config() which has an explicit might_sleep(). [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Link: https://lore.kernel.org/r/3bea2452deb8cc8be65982e87efa4c6861caa01c.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory()Christophe JAILLET2022-01-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. mpt_alloc_fw_memory() should still use GFP_ATOMIC, because it can be called from mpt_do_upload() which might sleep. [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Link: https://lore.kernel.org/r/db3db9db219005b75659561d08117d312d0cfb13.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" APIChristophe JAILLET2022-01-104-132/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation. It can be found in [3]. In this patch, all functions but pci_alloc_consistent() are handled. pci_alloc_consistent() needs more attention and explanation. [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ [3]: https://lore.kernel.org/kernel-janitors/20200716192821.321233-1-christophe.jaillet@wanadoo.fr/ Link: https://lore.kernel.org/r/e38e897fbd3314718315b0e357c824e3f01775d6.1641500561.git.christophe.jaillet@wanadoo.fr Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: megaraid: Avoid mismatched storage type sizesKees Cook2022-01-071-50/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove needless use of mbox_t, replacing with just struct mbox_out. Silences compiler warnings under a -Warray-bounds build: drivers/scsi/megaraid.c: In function 'megaraid_probe_one': drivers/scsi/megaraid.c:3615:30: error: array subscript 'mbox_t[0]' is partly outside array bounds of 'unsigned char[15]' [-Werror=array-bounds] 3615 | mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle; | ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/megaraid.c:3599:23: note: while referencing 'raw_mbox' 3599 | unsigned char raw_mbox[sizeof(struct mbox_out)]; | ^~~~~~~~ Link: https://lore.kernel.org/r/20220105173633.2421129-1-keescook@chromium.org Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: megaraidlinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: hisi_sas: Remove unused variable and check in ↵Xiang Chen2022-01-071-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hisi_sas_send_ata_reset_each_phy() In commit 29e2bac87421 ("scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list"), we use asd_sas_port->phy_mask instead of accessing asd_sas_port->phy_list, and it is enough to use asd_sas_port->phy_mask to check the state of phy, so remove the unused check and variable. Link: https://lore.kernel.org/r/1641300126-53574-1-git-send-email-chenxiang66@hisilicon.com Fixes: 29e2bac87421 ("scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list") Reported-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Colin King <colin.i.king@gmail.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: aic79xx: Remove redundant error variableMinghao Chi2022-01-051-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return the value from ahd_linux_queue_abort_cmd() directly instead of using a redundant variable. Link: https://lore.kernel.org/r/20220104112452.601899-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: pm80xx: Port reset timeout error handling correctionAjish Koshy2022-01-053-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error handling steps were not in sequence as per the programmers manual. Expected sequence: - PHY_DOWN (PORT_IN_RESET) - PORT_RESET_TIMER_TMO - Host aborts pending I/Os - Host deregister the device - Host sends HW_EVENT_PHY_DOWN ACK Previously we were sending HW_EVENT_PHY_DOWN ACK first and then deregister the device. Fix this to use the expected sequence. Link: https://lore.kernel.org/r/20211228111753.10802-1-Ajish.Koshy@microchip.com Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: mpi3mr: Fix formatting problems in some kernel-doc commentsYang Li2022-01-051-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove some warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/scsi/mpi3mr/mpi3mr_fw.c:2188: warning: Function parameter or member 'reason_code' not described in 'mpi3mr_check_rh_fault_ioc' drivers/scsi/mpi3mr/mpi3mr_fw.c:3650: warning: Excess function parameter 'init_type' description in 'mpi3mr_init_ioc' drivers/scsi/mpi3mr/mpi3mr_fw.c:4177: warning: bad line Link: https://lore.kernel.org/r/20211231082350.19315-1-yang.lee@linux.alibaba.com Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: mpi3mr: Fix some spelling mistakesColin Ian King2022-01-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some spelling mistakes in some literal strings. Fix them. Link: https://lore.kernel.org/r/20211224175240.1348942-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: mpt3sas: Update persistent trigger pages from sysfs interfaceSuganath Prabu S2022-01-052-6/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Store sysfs-provided trigger values into the corresponding persistent trigger pages. Otherwise trigger entries are not persistent across system reboots. Link: https://lore.kernel.org/r/20211227053055.289537-1-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: core: Fix scsi_mode_select() interfaceDamien Le Moal2022-01-052-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modepage argument is unused. Remove it. Link: https://lore.kernel.org/r/20210929091744.706003-3-damien.lemoal@wdc.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: aacraid: Fix spelling of "its"Randy Dunlap2022-01-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the possessive "its" instead of the contraction "it's" in user messages. Link: https://lore.kernel.org/r/20211223061119.18304-1-rdunlap@infradead.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | scsi: qedf: Fix potential dereference of NULL pointerJiasheng Jiang2022-01-051-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of dma_alloc_coherent() needs to be checked to avoid use of NULL pointer in case of an allocation failure. Link: https://lore.kernel.org/r/20211216101449.375953-1-jiasheng@iscas.ac.cn Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-02 01:10:33 +0000