summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* net: ethernet: ti: ale: use define for host port in cpsw_ale_set_allmulti()Grygorii Strashko2019-04-271-2/+2
| | | | | | | | | Use ALE_PORT_HOST define for host port in cpsw_ale_set_allmulti() instead of constants. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: ale: fix mcast super settingGrygorii Strashko2019-04-271-1/+1
| | | | | | | | | | Use correct define ALE_SUPER for ALE Multicast Address Table Entry Supervisory Packet (SUPER) bit setting instead of ALE_BLOCKED. No issues were observed till now as it have never been set, but it's going to be used by new CPSW switch driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: drop cpsw_tx_packet_submit()Grygorii Strashko2019-04-271-12/+3
| | | | | | | | | Drop unnecessary wrapper function cpsw_tx_packet_submit() which is used only in one place. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: use devm_alloc_etherdev_mqs()Grygorii Strashko2019-04-271-12/+6
| | | | | | | | Use devm_alloc_etherdev_mqs() and simplify code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: drop pinctrl_pm_select_default_state callGrygorii Strashko2019-04-271-3/+0
| | | | | | | | | Drop pinctrl_pm_select_default_state call from probe as default pinctrl state is set by DD core. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: use local var dev in probeGrygorii Strashko2019-04-271-32/+33
| | | | | | | | Use local variable struct device *dev in probe to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: update cpsw_split_res() to accept cpsw_commonGrygorii Strashko2019-04-271-8/+6
| | | | | | | | | Update cpsw_split_res() to accept struct cpsw_common instead of struct net_device to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config optionGrygorii Strashko2019-04-273-28/+2
| | | | | | | | | | All TI drivers CPSW/NETCP can't work without ALE, hence simplify build of those drivers by always linking cpsw_ale and drop CONFIG_TI_CPSW_ALE config option. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: cpsw: drop TI_DAVINCI_CPDMA config optionGrygorii Strashko2019-04-273-43/+3
| | | | | | | | | | | | Both drivers CPSW and EMAC can't work without CPDMA, hence simplify build of those drivers by always linking davinci_cpdma and drop TI_DAVINCI_CPDMA config option. Note. the davinci_emac driver module was changed to "ti_davinci_emac" to make build work. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: ti: convert to SPDX license identifiersGrygorii Strashko2019-04-2718-180/+18
| | | | | | | | Replace textual license with SPDX-License-Identifier. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* genetlink: optionally validate strictly/dumpsJohannes Berg2019-04-277-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add options to strictly validate messages and dump messages, sometimes perhaps validating dump messages non-strictly may be required, so add an option for that as well. Since none of this can really be applied to existing commands, set the options everwhere using the following spatch: @@ identifier ops; expression X; @@ struct genl_ops ops[] = { ..., { .cmd = X, + .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, ... }, ... }; For new commands one should just not copy the .validate 'opt-out' flags and thus get strict validation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: make validation more configurable for future strictnessJohannes Berg2019-04-2718-82/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: make nla_nest_start() add NLA_F_NESTED flagMichal Kubecek2019-04-2710-39/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mac80211-next-for-davem-2019-04-26' of ↵David S. Miller2019-04-261-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211_hwsim: Extended Key ID supportAlexander Wetzel2019-04-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow Extended Key ID to be used with hwsim. Hwsim can only communicate with other hwsim cards, allowing it to bypass creation of A-MPDUs in the first place. Mixing keyIDs in an A-MPDU is therefore impossible and can never cause interoperability issues with other cards. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [reword comment slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211_hwsim: set p2p device interface support indicationAvraham Stern2019-04-261-0/+2
| | | | | | | | | | | | | | | | | | | | P2P device interface type was not indicated in the supported interface types even when hwsim was configured with p2p device support. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: hns3: remove reset after command send failedWeihang Li2019-04-261-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | It's meaningless to trigger reset when failed to send command to IMP, because the failure is usually caused by no authority, illegal command and so on. When that happened, we just need to return the status code for further debugging. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: prevent double free in hns3_put_ring_config()Huazhong Tan2019-04-261-5/+5
| | | | | | | | | | | | | | | | | | | | This patch adds a check for the hns3_put_ring_config() to prevent double free, and for more readable, move the NULL assignment of priv->ring_data into the hns3_put_ring_config(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: extend the loopback state acquisition timeliuzhongzhu2019-04-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The test results show that the maximum time of hardware return to mac link state is 500MS.The software needs to set twice the maximum time of hardware return state (1000MS). If not modified, the loopback test returns probability failure. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: fix pause configure fail problemHuazhong Tan2019-04-261-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | When configure pause, current implementation returns directly after setup PFC without setup BP, which is not sufficient. So this patch fixes it, only return while setting PFC failed. Fixes: 44e59e375bf7 ("net: hns3: do not return GE PFC setting err when initializing") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: not reset TQP in the DOWN while VF resettingHuazhong Tan2019-04-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | Since the hardware does not handle mailboxes and the hardware reset include TQP reset, so it is unnecessary to reset TQP in the hclgevf_ae_stop() while doing VF reset. Also it is unnecessary to reset the remaining TQP when one reset fails. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: use a reserved byte to identify need_resp flagHuazhong Tan2019-04-263-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses a reserved byte in the hclge_mbx_vf_to_pf_cmd to save the need_resp flag, so when PF received the mailbox, it can use it to decise whether send a response to VF. For hclge_set_vf_uc_mac_addr(), it should use mbx_need_resp flag to decide whether send response to VF. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: use atomic_t replace u32 for arq's countHuazhong Tan2019-04-263-5/+6
| | | | | | | | | | | | | | | | | | | | | | Since irq handler and mailbox task will both update arq's count, so arq's count should use atomic_t instead of u32, otherwise its value may go wrong finally. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: stop sending keep alive msg when VF command queue needs reinitHuazhong Tan2019-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | HCLGEVF_STATE_CMD_DISABLE is more suitable than HCLGEVF_STATE_RST_HANDLING to stop sending keep alive msg, since HCLGEVF_STATE_RST_HANDLING only be set when the reset task is running. Fixes: c59a85c07e77 ("net: hns3: stop sending keep alive msg to PF when VF is resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: handle the BD info on the last BD of the packetYunsheng Lin2019-04-261-18/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bdinfo handled in hns3_handle_bdinfo is only valid on the last BD of the current packet, currently the bd info may be handled based on the first BD if the packet has more than two BDs, which may cause rx error. This patch fixes it by using the last BD of the current packet in hns3_handle_bdinfo. Also, hns3_set_rx_skb_rss_type has used RSS hash value from the last BD of the current packet, so remove the same last BD calculation in hns3_set_rx_skb_rss_type and call it from hns3_handle_bdinfo. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: fix for TX clean num when cleaning TX BDYunsheng Lin2019-04-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hns3_desc_unused() returns how many BD have been cleaned, but new buffer has not been attached to them. The register of HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new buffer to or need to cleaned. So the remaining BD need to be clean is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused(). Also, new buffer can not attach to the pending BD when the last BD is not handled, because memcpy has not been done on the first pending BD. This patch fixes by subtracting the pending BD num from unused_count after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate the BD bum need to be clean. Fixes: e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: fix data race between ring->next_to_cleanYunsheng Lin2019-04-262-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hns3_clean_tx_ring calls hns3_nic_reclaim_one_desc to clean buffers and set ring->next_to_clean, then hns3_nic_net_xmit reuses the cleaned buffers. But there are no memory barriers when buffers gets recycled, so the recycled buffers can be corrupted. This patch uses smp_store_release to update ring->next_to_clean and smp_load_acquire to read ring->next_to_clean to properly hand off buffers from hns3_clean_tx_ring to hns3_nic_net_xmit. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | nfp: implement PCI driver shutdown callbackDirk van der Merwe2019-04-262-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Device may be shutdown without the hardware being reinitialized, in which case we want to ensure we cleanup properly. This is especially important for kexec with traffic flowing. The shutdown procedures resembles the remove procedures, so we can reuse those common tasks. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | NFC: st95hf: remove set but not used variables 'dev, nfcddev'YueHaibing2019-04-261-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes gcc '-Wunused-but-set-variable' warning: drivers/nfc/st95hf/core.c: In function 'st95hf_irq_thread_handler': drivers/nfc/st95hf/core.c:786:26: warning: variable 'nfcddev' set but not used [-Wunused-but-set-variable] drivers/nfc/st95hf/core.c:784:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable] They are never used since introduction in commit cab47333f0f7 ("NFC: Add STMicroelectronics ST95HF driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: improve genphy_soft_resetHeiner Kallweit2019-04-261-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | usbnet: ipheth: Simplify device detectionGuenter Roeck2019-04-261-55/+3
| | | | | | | | | | | | | | | | | | | | | | All Apple products use the same protocol for tethering over USB. To simplify the code and make it future proof, use USB_VENDOR_AND_INTERFACE_INFO() instead of USB_DEVICE_AND_INTERFACE_INFO() to automatically detect and support all existing and future Apple products using the same interface. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cnic: Refactor code and mark expected switch fall-throughGustavo A. R. Silva2019-04-261-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, refactor code a bit and mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/broadcom/cnic.c: In function ‘cnic_cm_process_kcqe’: drivers/net/ethernet/broadcom/cnic.c:4044:11: warning: this statement may fall through [-Wimplicit-fallthrough=] opcode = L4_KCQE_OPCODE_VALUE_CLOSE_COMP; drivers/net/ethernet/broadcom/cnic.c:4050:2: note: here case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4/cxgb4vf_main: Mark expected switch fall-throughGustavo A. R. Silva2019-04-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c: In function ‘fwevtq_handler’: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:520:7: warning: this statement may fall through [-Wimplicit-fallthrough=] cpl = (void *)p; ~~~~^~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:524:2: note: here case CPL_SGE_EGR_UPDATE: { ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | wimax/i2400m/control: Mark expected switch fall-throughGustavo A. R. Silva2019-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: In file included from drivers/net/wimax/i2400m/debug-levels.h:30, from drivers/net/wimax/i2400m/control.c:86: drivers/net/wimax/i2400m/control.c: In function ‘i2400m_report_tlv_system_state’: ./include/linux/wimax/debug.h:200:4: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/wimax/debug.h:404:36: note: in expansion of macro ‘_d_printf’ #define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a) ^~~~~~~~~ drivers/net/wimax/i2400m/control.c:354:3: note: in expansion of macro ‘d_printf’ d_printf(1, dev, "entering BS-negotiated idle mode\n"); ^~~~~~~~ drivers/net/wimax/i2400m/control.c:355:2: note: here case I2400M_SS_DISCONNECTING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Mark expected switch fall-throughsGustavo A. R. Silva2019-04-261-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function ‘xgbe_set_hwtstamp_settings’: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1614:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1616:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1625:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1627:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1636:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1638:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comments are modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: trust non-IP cast type in qeth_l3_fill_header()Julian Wiedmann2019-04-261-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | When building the L3 HW header for non-IP packets, trust the cast type that was passed as parameter. qeth_l3_get_cast_type() has most likely also used h_dest to determine the cast type, so we get the same result, and can remove that duplicated code. In the unlikely case that we would get a _different_ cast type, then that's based off a route lookup and should be considered authoritative. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: extract helper to determine L2 cast typeJulian Wiedmann2019-04-263-18/+14
| | | | | | | | | | | | | | | | | | | | This de-duplicates the L2 and L3 cast-type code, and makes the L2 code a bit more robust by removing the fragile assumption that skb->data always points to the Ethernet Header. This would break in code paths where we pushed the HW header onto the skb. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: cache max number of available buffer elementsJulian Wiedmann2019-04-263-24/+22
| | | | | | | | | | | | | | | | | | | | | | | | The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: don't clear Output buffers on every queue initJulian Wiedmann2019-04-261-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: use IS_* helpers for checking device typeJulian Wiedmann2019-04-267-78/+54
| | | | | | | | | | | | | | | | We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: clean up stale buffer state documentationJulian Wiedmann2019-04-261-28/+13
| | | | | | | | | | | | | | | | | | We don't keep track of Input Buffer states, so remove the comments that make it sound like the qeth_qdio_buffer_states enum applies to Input Buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390/qeth: remove RX seqno in skb->cbJulian Wiedmann2019-04-262-3/+0
| | | | | | | | | | | | | | | | | | | | It's unclear what exact purpose this seqno may have served in the past. But it's certainly no longer used anymore, as the following napi_gro_receive() will straight away clear this part of the cb again. Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | s390: qeth: address type mismatch warningArnd Bergmann2019-04-261-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: implement ndo_get_devlink_portJiri Pirko2019-04-261-0/+8
| | | | | | | | | | | | | | | | Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: move netdev creation/destruction to dev probeJiri Pirko2019-04-266-118/+85
| | | | | | | | | | | | | | | | | | | | | | Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: extend device attrs to support port addition and deletionJiri Pirko2019-04-263-4/+92
| | | | | | | | | | | | | | | | | | In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: implement dev probe/remove skeleton with port initializationJiri Pirko2019-04-264-30/+160
| | | | | | | | | | | | | | | | | | Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: change debugfs tree topologyJiri Pirko2019-04-263-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: generate random switch id instead of using dev idJiri Pirko2019-04-263-2/+5
| | | | | | | | | | | | | | | | | | Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: merge sdev into devJiri Pirko2019-04-265-115/+116
| | | | | | | | | | | | | | | | As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:07:12 +0000