summaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAgeFilesLines
* btrfs: don't take a bio_counter reference for cloned biosChristoph Hellwig2022-09-263-10/+2
| | | | | | | | | | | | | | | | | | | Stop grabbing an extra bio_counter reference for each clone bio in a mirrored write and instead just release the one original reference in btrfs_end_bioc once all the bios for a single btrfs_bio have completed instead of at the end of btrfs_submit_bio once all bios have been submitted. This means the reference is now carried by the "upper" btrfs_bio only instead of each lower bio. Also remove the now unused btrfs_bio_counter_inc_noblocked helper. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: pass the operation to btrfs_bio_allocChristoph Hellwig2022-09-265-12/+7
| | | | | | | | | | | | | | Pass the operation to btrfs_bio_alloc, matching what bio_alloc_bioset set does. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: move btrfs_bio allocation to volumes.cChristoph Hellwig2022-09-266-79/+75
| | | | | | | | | | | | | | | | | | volumes.c is the place that implements the storage layer using the btrfs_bio structure, so move the bio_set and allocation helpers there as well. To make up for the new initialization boilerplate, merge the two init/exit helpers in extent_io.c into a single one. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: don't create integrity bioset for btrfs_biosetChristoph Hellwig2022-09-261-6/+0
| | | | | | | | | | | | | | | | | | btrfs never uses bio integrity data itself, so don't allocate the integrity pools for btrfs_bioset. This patch is a revert of the commit b208c2f7ceaf ("btrfs: Fix crash due to not allocating integrity data for a set"). The integrity data pool is not needed, the bio-integrity code now handles allocating the integrity payload without that. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove use btrfs_remove_free_space_cache instead of variantJosef Bacik2022-09-265-31/+16
| | | | | | | | | | | | We are calling __btrfs_remove_free_space_cache everywhere to cleanup the block group free space, however we can just use btrfs_remove_free_space_cache and pass in the block group in all of these places. Then we can remove __btrfs_remove_free_space_cache and rename __btrfs_remove_free_space_cache_locked to __btrfs_remove_free_space_cache. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: call __btrfs_remove_free_space_cache_locked on cache load failureJosef Bacik2022-09-261-20/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that lockdep is staying enabled through our entire CI runs I started seeing the following stack in generic/475 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0 CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0 RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010 R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80 FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0 Call Trace: __btrfs_remove_free_space_cache+0x27/0x30 load_free_space_cache+0xad2/0xaf0 caching_thread+0x40b/0x650 ? lock_release+0x137/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_is_held_type+0xe2/0x140 process_one_work+0x271/0x590 ? process_one_work+0x590/0x590 worker_thread+0x52/0x3b0 ? process_one_work+0x590/0x590 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This is the code ctl = block_group->free_space_ctl; discard_ctl = &block_group->fs_info->discard_ctl; lockdep_assert_held(&ctl->tree_lock); We have a temporary free space ctl for loading the free space cache in order to avoid having allocations happening while we're loading the cache. When we hit an error we free it all up, however this also calls btrfs_discard_update_discardable, which requires block_group->free_space_ctl->tree_lock to be held. However this is our temporary ctl so this lock isn't held. Fix this by calling __btrfs_remove_free_space_cache_locked instead so that we only clean up the entries and do not mess with the discardable stats. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: fix race between quota enable and quota rescan ioctlFilipe Manana2022-09-261-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | When enabling quotas, at btrfs_quota_enable(), after committing the transaction, we change fs_info->quota_root to point to the quota root we created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try to start the qgroup rescan worker, first by initializing it with a call to qgroup_rescan_init() - however if that fails we end up freeing the quota root but we leave fs_info->quota_root still pointing to it, this can later result in a use-after-free somewhere else. We have previously set the flags BTRFS_FS_QUOTA_ENABLED and BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at btrfs_quota_enable(), which is possible if someone already called the quota rescan ioctl, and therefore started the rescan worker. So fix this by ignoring an -EINPROGRESS and asserting we can't get any other error. Reported-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/ CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: don't print information about space cache or tree every remountMaciej S. Szmigiero2022-09-261-4/+7
| | | | | | | | | | | | | | | | | btrfs currently prints information about space cache or free space tree being in use on every remount, regardless whether such remount actually enabled or disabled one of these features. This is actually unnecessary since providing remount options changing the state of these features will explicitly print the appropriate notice. Let's instead print such unconditional information just on an initial mount to avoid filling the kernel log when, for example, laptop-mode-tools remount the fs on some events. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: simplify error handling at btrfs_del_root_ref()Filipe Manana2022-09-261-9/+7
| | | | | | | | | | | | | | | | | At btrfs_del_root_ref() we are using two return variables, named 'ret' and 'err'. This makes it harder to follow and easier to return the wrong value in case an error happens - the previous patch in the series, which has the subject "btrfs: fix silent failure when deleting root reference", fixed a bug due to confusion created by these two variables. So change the function to use a single variable for tracking the return value of the function, using only 'ret', which is consistent with most of the codebase. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: get rid of block group caching progress logicOmar Sandoval2022-09-266-72/+2
| | | | | | | | | | | | | | | struct btrfs_caching_ctl::progress and struct btrfs_block_group::last_byte_to_unpin were previously needed to ensure that unpin_extent_range() didn't return a range to the free space cache before the caching thread had a chance to cache that range. However, the commit "btrfs: fix space cache corruption and potential double allocations" made it so that we always synchronously cache the block group at the time that we pin the extent, so this machinery is no longer necessary. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: send: fix failures when processing inodes with no linksBingJing Chang2022-09-261-129/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bug causing send failures when processing an orphan directory with no links. In commit 46b2f4590aab ("Btrfs: fix send failure when root has deleted files still open")', the orphan inode issue was addressed. The send operation fails with a ENOENT error because of any attempts to generate a path for the inode with a link count of zero. Therefore, in that patch, sctx->ignore_cur_inode was introduced to be set if the current inode has a link count of zero for bypassing some unnecessary steps. And a helper function btrfs_unlink_all_paths() was introduced and called to clean up old paths found in the parent snapshot. However, not only regular files but also directories can be orphan inodes. So if the send operation meets an orphan directory, it will issue a wrong unlink command for that directory now. Soon the receive operation fails with a EISDIR error. Besides, the send operation also fails with a ENOENT error later when it tries to generate a path of it. Similar example but making an orphan dir for an incremental send: $ btrfs subvolume create vol $ mkdir vol/dir $ touch vol/dir/foo $ btrfs subvolume snapshot -r vol snap1 $ btrfs subvolume snapshot -r vol snap2 # Turn the second snapshot to RW mode and delete the whole dir while # holding an open file descriptor on it. $ btrfs property set snap2 ro false $ exec 73<snap2/dir $ rm -rf snap2/dir # Set the second snapshot back to RO mode and do an incremental send. $ btrfs property set snap2 ro true $ mkdir receive_dir $ btrfs send snap2 -p snap1 | btrfs receive receive_dir/ At subvol snap2 At snapshot snap2 ERROR: send ioctl failed with -2: No such file or directory ERROR: unlink dir failed. Is a directory Actually, orphan inodes are more common use cases in cascading backups. (Please see the illustration below.) In a cascading backup, a user wants to replicate a couple of snapshots from Machine A to Machine B and from Machine B to Machine C. Machine B doesn't take any RO snapshots for sending. All a receiver does is create an RW snapshot of its parent snapshot, apply the send stream and turn it into RO mode at the end. Even if all paths of some inodes are deleted in applying the send stream, these inodes would not be deleted and become orphans after changing the subvolume from RW to RO. Moreover, orphan inodes can occur not only in send snapshots but also in parent snapshots because Machine B may do a batch replication of a couple of snapshots. An illustration for cascading backups: Machine A (snapshot {1..n}) --> Machine B --> Machine C The idea to solve the problem is to delete all the items of orphan inodes before using these snapshots for sending. I used to think that the reasonable timing for doing that is during the ioctl of changing the subvolume from RW to RO because it sounds good that we will not modify the fs tree of a RO snapshot anymore. However, attempting to do the orphan cleanup in the ioctl would be pointless. Because if someone is holding an open file descriptor on the inode, the reference count of the inode will never drop to 0. Then iput() cannot trigger eviction, which finally deletes all the items of it. So we try to extend the original patch to handle orphans in send/parent snapshots. Here are several cases that need to be considered: Case 1: BTRFS_COMPARE_TREE_NEW | send snapshot | action -------------------------------- nlink | 0 | ignore In case 1, when we get a BTRFS_COMPARE_TREE_NEW tree comparison result, it means that a new inode is found in the send snapshot and it doesn't appear in the parent snapshot. Since this inode has a link count of zero (It's an orphan and there're no paths for it.), we can leverage sctx->ignore_cur_inode in the original patch to prevent it from being created. Case 2: BTRFS_COMPARE_TREE_DELETED | parent snapshot | action ---------------------------------- nlink | 0 | as usual In case 2, when we get a BTRFS_COMPARE_TREE_DELETED tree comparison result, it means that the inode only appears in the parent snapshot. As usual, the send operation will try to delete all its paths. However, this inode has a link count of zero, so no paths of it will be found. No deletion operations will be issued. We don't need to change any logic. Case 3: BTRFS_COMPARE_TREE_CHANGED | | parent snapshot | send snapshot | action ----------------------------------------------------------------------- subcase 1 | nlink | 0 | 0 | ignore subcase 2 | nlink | >0 | 0 | new_gen(deletion) subcase 3 | nlink | 0 | >0 | new_gen(creation) In case 3, when we get a BTRFS_COMPARE_TREE_CHANGED tree comparison result, it means that the inode appears in both snapshots. Here are 3 subcases. First, when the inode has link counts of zero in both snapshots. Since there are no paths for this inode in (source/destination) parent snapshots and we don't care about whether there is also an orphan inode in destination or not, we can set sctx->ignore_cur_inode on to prevent it from being created. For the second and the third subcases, if there are paths in one snapshot and there're no paths in the other snapshot for this inode. We can treat this inode as a new generation. We can also leverage the logic handling a new generation of an inode with small adjustments. Then it will delete all old paths and create a new inode with new attributes and paths only when there's a positive link count in the send snapshot. In subcase 2, the send operation only needs to delete all old paths as in the parent snapshot. But it may require more operations for a directory to remove its old paths. If a not-empty directory is going to be deleted (because it has a link count of zero in the send snapshot) but there are files/directories with bigger inode numbers under it, the send operation will need to rename it to its orphan name first. After processing and deleting the last item under this directory, the send operation will check this directory, aka the parent directory of the last item, again and issue a rmdir operation to remove it finally. Therefore, we also need to treat inodes with a link count of zero as if they didn't exist in get_cur_inode_state(), which is used in process_recorded_refs(). By doing this, when checking a directory with orphan names after the last item under it has been deleted, the send operation now can properly issue a rmdir operation. Otherwise, without doing this, the orphan directory with an orphan name would be kept here at the end due to the existing inode with a link count of zero being found. In subcase 3, as in case 2, no old paths would be found, so no deletion operations will be issued. The send operation will only create a new one for that inode. Note that subcase 3 is not common. That's because it's easy to reduce the hard links of an inode, but once all valid paths are removed, there are no valid paths for creating other hard links. The only way to do that is trying to send an older snapshot after a newer snapshot has been sent. Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: send: refactor arguments of get_inode_info()BingJing Chang2022-09-261-75/+78
| | | | | | | | | | | | Refactor get_inode_info() to populate all wanted fields on an output structure. Besides, also introduce a helper function called get_inode_gen(), which is commonly used. Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove unnecessary EXTENT_UPTODATE state in buffered I/O pathEthan Lien2022-09-263-22/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After we copied data to page cache in buffered I/O, we 1. Insert a EXTENT_UPTODATE state into inode's io_tree, by endio_readpage_release_extent(), set_extent_delalloc() or set_extent_defrag(). 2. Set page uptodate before we unlock the page. But the only place we check io_tree's EXTENT_UPTODATE state is in btrfs_do_readpage(). We know we enter btrfs_do_readpage() only when we have a non-uptodate page, so it is unnecessary to set EXTENT_UPTODATE. For example, when performing a buffered random read: fio --rw=randread --ioengine=libaio --direct=0 --numjobs=4 \ --filesize=32G --size=4G --bs=4k --name=job \ --filename=/mnt/file --name=job Then check how many extent_state in io_tree: cat /proc/slabinfo | grep btrfs_extent_state | awk '{print $2}' w/o this patch, we got 640567 btrfs_extent_state. w/ this patch, we got 204 btrfs_extent_state. Maintaining such a big tree brings overhead since every I/O needs to insert EXTENT_LOCKED, insert EXTENT_UPTODATE, then remove EXTENT_LOCKED. And in every insert or remove, we need to lock io_tree, do tree search, alloc or dealloc extent states. By removing unnecessary EXTENT_UPTODATE, we keep io_tree in a minimal size and reduce overhead when performing buffered I/O. Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Robbie Ko <robbieko@synology.com> Signed-off-by: Ethan Lien <ethanlien@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: simplify adding and replacing references during log replayFilipe Manana2022-09-261-151/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During log replay, when adding/replacing inode references, there are two special cases that have special code for them: 1) When we have an inode with two or more hardlinks in the same directory, therefore two or more names encoded in the same inode reference item, and one of the hard links gets renamed to the old name of another hard link - that is, the index number for a name changes. This was added in commit 0d836392cadd55 ("Btrfs: fix mount failure after fsync due to hard link recreation"), and is covered by test case generic/502 from fstests; 2) When we have several inodes that got renamed to an old name of some other inode, in a cascading style. The code to deal with this special case was added in commit 6b5fc433a7ad67 ("Btrfs: fix fsync after succession of renames of different files"), and is covered by test cases generic/526 and generic/527 from fstests. Both cases can be deal with by making sure __add_inode_ref() is always called by add_inode_ref() for every name encoded in the inode reference item, and not just for the first name that has a conflict. With such change we no longer need that special casing for the two cases mentioned before. So do those changes. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: sysfs: show discard stats and tunables in non-debug buildDavid Sterba2022-09-262-20/+17
| | | | | | | | | | | | | | | | | | | | | | | | | When discard=async was introduced there were also sysfs knobs and stats for debugging and tuning, hidden under CONFIG_BTRFS_DEBUG. The defaults have been set and so far seem to satisfy all users on a range of workloads. As there are not only tunables (like iops or kbps) but also stats tracking amount of discardable bytes, that should be available when the async discard is on (otherwise it's not). The stats are moved from the per-fs debug directory, so it's under /sys/fs/btrfs/FSID/discard - discard_bitmap_bytes - amount of discarded bytes from data tracked as bitmaps - discard_extent_bytes - dtto but as extents - discard_bytes_saved - - discardable_bytes - amount of bytes that can be discarded - discardable_extents - number of extents to be discarded - iops_limit - tunable limit of number of discard IOs to be issued - kbps_limit - tunable limit of kilobytes per second issued as discard IO - max_discard_size - tunable limit for size of one IO discard request Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: use delayed items when logging a directoryFilipe Manana2022-09-264-8/+562
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When logging a directory we start by flushing all its delayed items. That results in adding dir index items to the subvolume btree, for new dentries, and removing dir index items from the subvolume btree for any dentries that were deleted. This makes it straightforward to log a directory simply by iterating over all the modified subvolume btree leaves, especially when we used to log both dir index keys and dir item keys (before commit 339d035424849c ("btrfs: only copy dir index keys when logging a directory") and when we used to copy old dir index entries for leaves modified in the current transaction (before commit 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory")). From an efficiency point of view this has a couple of drawbacks: 1) Adds extra latency, due to copying delayed items to the subvolume btree and deleting dir index items from the btree. Further if there are other tasks accessing the btree, which is common (syscalls like creat, mkdir, rename, link, unlink, truncate, reflinks, etc, finishing an ordered extent, etc), lock contention can cause further delays, both to the task logging a directory and to the other tasks accessing the btree; 2) More time spent overall flushing delayed items, if after logging the directory further changes are done to the directory in the same transaction. For example, if we add 10 dentries to a directory, fsync it, add more 10 dentries, fsync it again, then add more 10 dentries and fsync it again, then we end up inserting 3 batches of 10 items to the subvolume btree. With the changes from this patch, we flush all the delayed items to the btree only once - a single batch of 30 items, and outside the logging code (transaction commit or when delayed items are flushed asynchronously). This change simply skips the flushing of delayed items every time we log a directory. Instead we copy the delayed insertion items directly to the log tree and delete delayed deletion items directly from the log tree. Therefore avoiding changing first the subvolume btree and then scanning it for new items to copy from it to the log tree and detecting deletions by observing gaps in consecutive dir index keys in subvolume btree leaves. Running the following tests on a non-debug kernel (Debian's default kernel config), on a box with a NVMe device, a 12 cores Intel CPU and 64G of ram, produced the results below. The results compare a branch without this patch and all the other patches it depends on versus the same branch with the patchset applied. The patchset is comprised of the following patches: btrfs: don't drop dir index range items when logging a directory btrfs: remove the root argument from log_new_dir_dentries() btrfs: update stale comment for log_new_dir_dentries() btrfs: free list element sooner at log_new_dir_dentries() btrfs: avoid memory allocation at log_new_dir_dentries() for common case btrfs: remove root argument from btrfs_delayed_item_reserve_metadata() btrfs: store index number instead of key in struct btrfs_delayed_item btrfs: remove unused logic when looking up delayed items btrfs: shrink the size of struct btrfs_delayed_item btrfs: search for last logged dir index if it's not cached in the inode btrfs: move need_log_inode() to above log_conflicting_inodes() btrfs: move log_new_dir_dentries() above btrfs_log_inode() btrfs: log conflicting inodes without holding log mutex of the initial inode btrfs: skip logging parent dir when conflicting inode is not a dir btrfs: use delayed items when logging a directory Custom test script for testing time spent at btrfs_log_inode(): #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 # Total number of files to create in the test directory. NUM_FILES=10000 # Fsync after creating or renaming N files. FSYNC_AFTER=100 umount $DEV &> /dev/null mkfs.btrfs -f $DEV mount -o ssd $DEV $MNT TEST_DIR=$MNT/testdir mkdir $TEST_DIR echo "Creating files..." for ((i = 1; i <= $NUM_FILES; i++)); do echo -n > $TEST_DIR/file_$i if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done sync echo "Renaming files..." for ((i = 1; i <= $NUM_FILES; i++)); do mv $TEST_DIR/file_$i $TEST_DIR/file_$i.renamed if (( ($i % $FSYNC_AFTER) == 0 )); then xfs_io -c "fsync" $TEST_DIR fi done umount $MNT And using the following bpftrace script to capture the total time that is spent at btrfs_log_inode(): #!/usr/bin/bpftrace k:btrfs_log_inode { @start_log_inode[tid] = nsecs; } kr:btrfs_log_inode /@start_log_inode[tid]/ { $dur = (nsecs - @start_log_inode[tid]) / 1000; @btrfs_log_inode_total_time = sum($dur); delete(@start_log_inode[tid]); } END { clear(@start_log_inode); } Result before applying patchset: @btrfs_log_inode_total_time: 622642 Result after applying patchset: @btrfs_log_inode_total_time: 354134 (-43.1% time spent) The following dbench script was also used for testing: #!/bin/bash NUM_JOBS=$(nproc --all) DEV=/dev/nvme0n1 MNT=/mnt/nvme0n1 MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-O no-holes -R free-space-tree" echo "performance" | \ tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT --skip-cleanup -t 120 -S $NUM_JOBS umount $MNT Before patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 3322265 0.034 21.032 Close 2440562 0.002 0.994 Rename 140664 1.150 269.633 Unlink 670796 1.093 269.678 Deltree 96 5.481 15.510 Mkdir 48 0.004 0.052 Qpathinfo 3010924 0.014 8.127 Qfileinfo 528055 0.001 0.518 Qfsinfo 552113 0.003 0.372 Sfileinfo 270575 0.005 0.688 Find 1164176 0.052 13.931 WriteX 1658537 0.019 5.918 ReadX 5207412 0.003 1.034 LockX 10818 0.003 0.079 UnlockX 10818 0.002 0.313 Flush 232811 1.027 269.735 Throughput 869.867 MB/sec (sync dirs) 12 clients 12 procs max_latency=269.741 ms After patchset: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 4152738 0.029 20.863 Close 3050770 0.002 1.119 Rename 175829 0.871 211.741 Unlink 838447 0.845 211.724 Deltree 120 4.798 14.162 Mkdir 60 0.003 0.005 Qpathinfo 3763807 0.011 4.673 Qfileinfo 660111 0.001 0.400 Qfsinfo 690141 0.003 0.429 Sfileinfo 338260 0.005 0.725 Find 1455273 0.046 6.787 WriteX 2073307 0.017 5.690 ReadX 6509193 0.003 1.171 LockX 13522 0.003 0.077 UnlockX 13522 0.002 0.125 Flush 291044 0.811 211.631 Throughput 1089.27 MB/sec (sync dirs) 12 clients 12 procs max_latency=211.750 ms (+25.2% throughput, -21.5% max latency) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: skip logging parent dir when conflicting inode is not a dirFilipe Manana2022-09-261-10/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we find a conflicting inode (an inode that had the same name and parent directory as the inode we are logging now) that was deleted in the current transaction, we always end up logging its parent directory. This is to deal with the case where the conflicting inode corresponds to a deleted subvolume/snapshot or a directory that had subvolumes/snapshots (or some subdirectory inside it had subvolumes/snapshots, etc), because we can't deal with dropping subvolumes/snapshots during log replay. So if we log the parent directory, and if we are dealing with these special cases, then we fallback to a transaction commit when logging the parent, because its last_unlink_trans will match the current transaction (which gets set and propagated when a subvolume/snapshot is deleted). This change skips the logging of the parent directory when the conflicting inode is not a directory (or a subvolume/snapshot). This is ok because in this case logging the current inode is enough to trigger an unlink of the conflicting inode during log replay. So for a case like this: $ mkdir /mnt/dir $ echo -n "first foo data" > /mnt/dir/foo $ sync $ rm -f /mnt/dir/foo $ echo -n "second foo data" > /mnt/dir/foo $ xfs_io -c "fsync" /mnt/dir/foo We avoid logging parent directory "dir" when logging the new file "foo". In other cases it avoids falling back to a transaction commit, when the parent directory has a last_unlink_trans value that matches the current transaction, due to moving a file from it to some other directory. This is a case that happens frequently with dbench for example, where a new file that has the name/parent of another file that was deleted in the current transaction, is fsynced. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: log conflicting inodes without holding log mutex of the initial inodeFilipe Manana2022-09-263-152/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When logging an inode, if we detect the inode has a reference that conflicts with some other inode that got renamed, we log that other inode while holding the log mutex of the current inode. We then find out if there are other inodes that conflict with the first conflicting inode, and log them while under the log mutex of the original inode. This is fine because the recursion can only happen once. For the upcoming work where we directly log delayed items without flushing them first to the subvolume tree, this recursion adds a lot of complexity and it's hard to keep lockdep happy about it. So collect a list of conflicting inodes and then log the inodes after unlocking the log mutex of the inode we started with. Also limit the maximum number of conflict inodes we log to 10, to avoid spending too much time logging (and maybe allocating too many list elements too), as typically we don't have more than 1 or 2 conflicting inodes - if we go over the limit, simply fallback to a transaction commit. It is possible to have a very long list of conflicting inodes to be intentionally created by a user if he/she creates a very long succession of renames like this: (...) rename E to F rename D to E rename C to D rename B to C rename A to B touch A (create a new file named A) fsync A If that happened for a sequence of hundreds or thousands of renames, it could massively slow down the logging and cause other secondary effects like for example blocking other fsync operations and transaction commits for a very long time (assuming it wouldn't run into -ENOSPC or -ENOMEM first). However such cases are very uncommon to happen in practice, nevertheless it's better to be prepared for them and avoid chaos. Such long sequence of conflicting inodes could be created before this change. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: move log_new_dir_dentries() above btrfs_log_inode()Filipe Manana2022-09-261-167/+167
| | | | | | | | | | | | The static function log_new_dir_dentries() is currently defined below btrfs_log_inode(), but in an upcoming patch a new function is introduced that is called by btrfs_log_inode() and this new function needs to call log_new_dir_dentries(). So move log_new_dir_dentries() to a location between btrfs_log_inode() and need_log_inode() (the later is called by log_new_dir_dentries()). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: move need_log_inode() to above log_conflicting_inodes()Filipe Manana2022-09-261-35/+35
| | | | | | | | | | | | | | The static function need_log_inode() is defined below btrfs_log_inode() and log_conflicting_inodes(), but in the next patches in the series we will need to call need_log_inode() in a couple new functions that will be used by btrfs_log_inode(). So move its definition to a location above log_conflicting_inodes(). Also make its arguments 'const', since they are not supposed to be modified. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: search for last logged dir index if it's not cached in the inodeFilipe Manana2022-09-261-45/+74
| | | | | | | | | | | | | | | | | | | | | The key offset of the last dir index item that was logged is stored in the inode's last_dir_index_offset field. However that field is not persisted in the inode item or elsewhere, so if the inode gets evicted and reloaded, it gets a value of (u64)-1, so that when we are logging dir index items we check if they were logged before, to avoid attempts to insert duplicated keys and fallback to a transaction commit. Improve on this by searching for the last dir index that was logged when we start logging a directory if the inode's last_dir_index_offset is not set (has a value of (u64)-1) and it was logged before. This avoids checking if each dir index item we find was already logged before, and simplifies the logging of dir index items (process_dir_items_leaf()). This will also be needed for an incoming change where we start logging delayed items directly, without flushing them first. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: shrink the size of struct btrfs_delayed_itemFilipe Manana2022-09-262-24/+25
| | | | | | | | | | | | | | | | | | | | | | | | Currently struct btrfs_delayed_item has a base size of 96 bytes, but its size can be decreased by doing the following 2 tweaks: 1) Change data_len from u32 to u16. Our maximum possible leaf size is 64K, so the data_len can never be larger than that, and in fact it is always much smaller than that. The max length for a dentry's name is ensured at the VFS level (PATH_MAX, 4096 bytes) and in struct btrfs_inode_ref and btrfs_dir_item we use a u16 to store the name's length; 2) Change 'ins_or_del' to a 1 bit enum, which is all we need since it can only have 2 values. After this there's also no longer the need to BUG_ON() before using 'ins_or_del' in several places. Also rename the field from 'ins_or_del' to 'type', which is more clear. These two tweaks decrease the size of struct btrfs_delayed_item from 96 bytes down to 88 bytes. A previous patch already reduced the size of this structure by 16 bytes, but an upcoming change will increase its size by 16 bytes (adding a struct list_head element). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove unused logic when looking up delayed itemsFilipe Manana2022-09-261-42/+3
| | | | | | | | | | | All callers pass NULL to the 'prev' and 'next' arguments of the function __btrfs_lookup_delayed_item(), so remove these arguments. Also, remove the unnecessary wrapper __btrfs_lookup_delayed_insertion_item(), making btrfs_delete_delayed_insertion_item() directly call __btrfs_lookup_delayed_item(). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: store index number instead of key in struct btrfs_delayed_itemFilipe Manana2022-09-262-53/+56
| | | | | | | | | | | | | | | | All delayed items are for dir index keys, so there's really no point of having an embedded struct btrfs_key in struct btrfs_delayed_item, which makes the structure use more space than necessary (and adds a hole of 7 bytes). So replace the key field with an index number (u64), which reduces the size of struct btrfs_delayed_item from 112 bytes down to 96 bytes. Some upcoming work will increase the structure size by 16 bytes, so this change compensates for that future size increase. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove root argument from btrfs_delayed_item_reserve_metadata()Filipe Manana2022-09-261-5/+3
| | | | | | | | | The root argument of btrfs_delayed_item_reserve_metadata() is used only to get the fs_info object, but we already have a transaction handle, which we can use to get the fs_info. So remove the root argument. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: avoid memory allocation at log_new_dir_dentries() for common caseFilipe Manana2022-09-261-17/+12
| | | | | | | | | | | | | | | | | At log_new_dir_dentries() we always start by allocating a list element for the starting inode and then do a while loop with the condition being a list emptiness check. This however is not needed, we can avoid allocating this initial list element and then just check for the list emptiness at the end of the loop's body. So just do that to save one memory allocation from the kmalloc-32 slab. This allows for not doing any memory allocation when we don't have any subdirectory to log, which is a very common case. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: free list element sooner at log_new_dir_dentries()Filipe Manana2022-09-261-22/+30
| | | | | | | | | | | | | | | | | At log_new_dir_dentries(), there's no need to keep the current list element allocated while processing the leaves with directory items for the current directory, and while logging other inodes. Plus in case we find a subdirectory, we also end up allocating a new list element while the current one is still allocated, temporarily using more memory than necessary. So free the current list element early on, before processing leaves. Also make the removal and release of all list elements in case of an error more simple by eliminating the label and goto, adding an explicit loop to release all list elements in case an error happens. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: update stale comment for log_new_dir_dentries()Filipe Manana2022-09-261-4/+4
| | | | | | | | | | | | | | | The comment refers to the function log_dir_items() in order to check why the inodes of new directory entries need to be logged, but the relevant comments are no longer at log_dir_items(), they were moved to the function process_dir_items_leaf() in commit eb10d85ee77f09 ("btrfs: factor out the copying loop of dir items from log_dir_items()"). So update it with the current function name. Also remove references with i_mutex to "VFS lock", since the inode lock is no longer a mutex since 2016 (it's now a rw semaphore). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove the root argument from log_new_dir_dentries()Filipe Manana2022-09-261-3/+3
| | | | | | | | | There's no point in passing a root argument to log_new_dir_dentries() because it always corresponds to the root of the given inode. So remove it and extract the root from the given inode. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: don't drop dir index range items when logging a directoryFilipe Manana2022-09-261-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When logging a directory that was previously logged in the current transaction, we drop all the range items (BTRFS_DIR_LOG_INDEX_KEY key type). This is because we will process all leaves in the subvolume's tree that were changed in the current transaction and then add range items for covering new dir index items and deleted dir index items, which could cover now a larger range than before. We used to fail if we tried to insert a range item key that already exists, so we dropped all range items to avoid failing. However nowadays, since commit 750ee454908e90 ("btrfs: fix assertion failure when logging directory key range item"), we simply update any range item that already exists, increasing its range's last dir index if needed. Since the range covered by a range item can never decrease, due to the fact that dir index values come from a monotonically increasing counter and are never reused, we can stop dropping all range items before we start logging a directory. By not dropping the items we can avoid having occasional tree rebalance operations. This will also be needed for an incoming change where we start logging delayed items directly, without flushing them first. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: use larger block size for data extent scrubQu Wenruo2022-09-261-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [PROBLEM] The existing scrub code for data extents always limit the block size to sectorsize. This causes quite some extra scrub_block being allocated: (there is a data extent at logical bytenr 298844160, length 64KiB) alloc_scrub_block: new block: logical=298844160 physical=298844160 mirror=1 alloc_scrub_block: new block: logical=298848256 physical=298848256 mirror=1 alloc_scrub_block: new block: logical=298852352 physical=298852352 mirror=1 alloc_scrub_block: new block: logical=298856448 physical=298856448 mirror=1 alloc_scrub_block: new block: logical=298860544 physical=298860544 mirror=1 alloc_scrub_block: new block: logical=298864640 physical=298864640 mirror=1 alloc_scrub_block: new block: logical=298868736 physical=298868736 mirror=1 alloc_scrub_block: new block: logical=298872832 physical=298872832 mirror=1 alloc_scrub_block: new block: logical=298876928 physical=298876928 mirror=1 alloc_scrub_block: new block: logical=298881024 physical=298881024 mirror=1 alloc_scrub_block: new block: logical=298885120 physical=298885120 mirror=1 alloc_scrub_block: new block: logical=298889216 physical=298889216 mirror=1 alloc_scrub_block: new block: logical=298893312 physical=298893312 mirror=1 alloc_scrub_block: new block: logical=298897408 physical=298897408 mirror=1 alloc_scrub_block: new block: logical=298901504 physical=298901504 mirror=1 alloc_scrub_block: new block: logical=298905600 physical=298905600 mirror=1 ... scrub_block_put: free block: logical=298844160 physical=298844160 len=4096 mirror=1 scrub_block_put: free block: logical=298848256 physical=298848256 len=4096 mirror=1 scrub_block_put: free block: logical=298852352 physical=298852352 len=4096 mirror=1 scrub_block_put: free block: logical=298856448 physical=298856448 len=4096 mirror=1 scrub_block_put: free block: logical=298860544 physical=298860544 len=4096 mirror=1 scrub_block_put: free block: logical=298864640 physical=298864640 len=4096 mirror=1 scrub_block_put: free block: logical=298868736 physical=298868736 len=4096 mirror=1 scrub_block_put: free block: logical=298872832 physical=298872832 len=4096 mirror=1 scrub_block_put: free block: logical=298876928 physical=298876928 len=4096 mirror=1 scrub_block_put: free block: logical=298881024 physical=298881024 len=4096 mirror=1 scrub_block_put: free block: logical=298885120 physical=298885120 len=4096 mirror=1 scrub_block_put: free block: logical=298889216 physical=298889216 len=4096 mirror=1 scrub_block_put: free block: logical=298893312 physical=298893312 len=4096 mirror=1 scrub_block_put: free block: logical=298897408 physical=298897408 len=4096 mirror=1 scrub_block_put: free block: logical=298901504 physical=298901504 len=4096 mirror=1 scrub_block_put: free block: logical=298905600 physical=298905600 len=4096 mirror=1 This behavior will waste a lot of memory, especially after we have moved quite some members from scrub_sector to scrub_block. [FIX] To reduce the allocation of scrub_block, and to reduce memory usage, use BTRFS_STRIPE_LEN instead of sectorsize as the block size to scrub data extents. This results only one scrub_block to be allocated for above data extent: alloc_scrub_block: new block: logical=298844160 physical=298844160 mirror=1 scrub_block_put: free block: logical=298844160 physical=298844160 len=65536 mirror=1 This would greatly reduce the memory usage (even it's just transient) for larger data extents scrub. For above example, the memory usage would be: Old: num_sectors * (sizeof(scrub_block) + sizeof(scrub_sector)) 16 * (408 + 96) = 8065 New: sizeof(scrub_block) + num_sectors * sizeof(scrub_sector) 408 + 16 * 96 = 1944 A good reduction of 75.9%. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: move logical/physical/dev/mirror_num from scrub_sector to ↵Qu Wenruo2022-09-261-73/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | scrub_block Currently we store the following members in scrub_sector: - logical - physical - physical_for_dev_replace - dev - mirror_num However the current scrub code has ensured that scrub_blocks never cross stripe boundary. This is caused by the entry functions (scrub_simple_mirror, scrub_simple_stripe), thus every scrub_block will not cross stripe boundary. Thus this makes it possible to move those members into scrub_block other than putting them into scrub_sector. This should save quite some memory, as a scrub_block can be as large as 64 sectors, even for metadata it's 16 sectors byte default. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: remove scrub_sector::page and use scrub_block::pages insteadQu Wenruo2022-09-261-32/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although scrub currently works for subpage (PAGE_SIZE > sectorsize) cases, it will allocate one page for each scrub_sector, which can cause extra unnecessary memory usage. Utilize scrub_block::pages[] instead of allocating page for each scrub_sector, this allows us to integrate larger extents while using less memory. For example, if our page size is 64K, sectorsize is 4K, and we got an 32K sized extent. We will only allocate one page for scrub_block, and all 8 scrub sectors will point to that page. To do that properly, here we introduce several small helpers: - scrub_page_get_logical() Get the logical bytenr of a page. We store the logical bytenr of the page range into page::private. But for 32bit systems, their (void *) is not large enough to contain a u64, so in that case we will need to allocate extra memory for it. For 64bit systems, we can use page::private directly. - scrub_block_get_logical() Just get the logical bytenr of the first page. - scrub_sector_get_page() Return the page which the scrub_sector points to. - scrub_sector_get_page_offset() Return the offset inside the page which the scrub_sector points to. - scrub_sector_get_kaddr() Return the address which the scrub_sector points to. Just a wrapper using scrub_sector_get_page() and scrub_sector_get_page_offset() - bio_add_scrub_sector() Please note that, even with this patch, we're still allocating one page for one sector for data extents. This is because in scrub_extent() we split the data extent using sectorsize. The memory usage reduction will need extra work to make scrub to work like data read to only use the correct sector(s). Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: introduce scrub_block::pages for more efficient memory usage ↵Qu Wenruo2022-09-261-22/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for subpage [BACKGROUND] Currently for scrub, we allocate one page for one sector, this is fine for PAGE_SIZE == sectorsize support, but can waste extra memory for subpage support. [CODE CHANGE] Make scrub_block contain all the pages, so if we're scrubbing an extent sized 64K, and our page size is also 64K, we only need to allocate one page. [LIFESPAN CHANGE] Since now scrub_sector no longer holds a page, but is using scrub_block::pages[] instead, we have to ensure scrub_block has a longer lifespan for write bio. The lifespan for read bio is already large enough. Now scrub_block will only be released after the write bio finished. [COMING NEXT] Currently we only added scrub_block::pages[] for this purpose, but scrub_sector is still utilizing the old scrub_sector::page. The switch will happen in the next patch. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: factor out allocation and initialization of scrub_sector into ↵Qu Wenruo2022-09-261-31/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | helper The allocation and initialization is shared by 3 call sites, and we're going to change the initialization of some members in the upcoming patches. So factor out the allocation and initialization of scrub_sector into a helper, alloc_scrub_sector(), which will do the following work: - Allocate the memory for scrub_sector - Allocate a page for scrub_sector::page - Initialize scrub_sector::refs to 1 - Attach the allocated scrub_sector to scrub_block The attachment is bidirectional, which means scrub_block::sectorv[] will be updated and scrub_sector::sblock will also be updated. - Update scrub_block::sector_count and do extra sanity check on it Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: factor out initialization of scrub_block into helperQu Wenruo2022-09-261-23/+23
| | | | | | | | | | | | | Although there are only two callers, we are going to add some members for scrub_block in the incoming patches. Factoring out the initialization code will make later expansion easier. One thing to note is, even scrub_handle_errored_block() doesn't utilize scrub_block::refs, we still use alloc_scrub_block() to initialize sblock::ref, allowing us to use scrub_block_put() to do cleanup. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: use pointer array to replace sblocks_for_recheckQu Wenruo2022-09-261-46/+53
| | | | | | | | | | | | | | | | | | | | | | | In function scrub_handle_errored_block(), we use @sblocks_for_recheck pointer to hold one scrub_block for each mirror, and uses kcalloc() to allocate an array. But this one pointer for an array is not readable due to the member offsets done by addition and not []. Change this pointer to struct scrub_block *[BTRFS_MAX_MIRRORS], this will slightly increase the stack memory usage. Since function scrub_handle_errored_block() won't get iterative calls, this extra cost would completely be acceptable. And since we're here, also set sblock->refs and use scrub_block_put() to clean them up, as later we will add extra members in scrub_block, which needs scrub_block_put() to clean them up. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: send: add support for fs-verityBoris Burkov2022-09-265-7/+122
| | | | | | | | | | | | | | | | | | | | | | | Preserve the fs-verity status of a btrfs file across send/recv. There is no facility for installing the Merkle tree contents directly on the receiving filesystem, so we package up the parameters used to enable verity found in the verity descriptor. This gives the receive side enough information to properly enable verity again. Note that this means that receive will have to re-compute the whole Merkle tree, similar to how compression worked before encoded_write. Since the file becomes read-only after verity is enabled, it is important that verity is added to the send stream after any file writes. Therefore, when we process a verity item, merely note that it happened, then actually create the command in the send stream during 'finish_inode_if_needed'. This also creates V3 of the send stream format, without any format changes besides adding the new commands and attributes. Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: use atomic_try_cmpxchg in free_extent_bufferUros Bizjak2022-09-261-4/+2
| | | | | | | | | | | | | | | | | | | | Use `atomic_try_cmpxchg(ptr, &old, new)` instead of `atomic_cmpxchg(ptr, old, new) == old` in free_extent_buffer. This has two benefits: - The x86 cmpxchg instruction returns success in the ZF flag, so this change saves a compare after cmpxchg, as well as a related move instruction in the front of cmpxchg. - atomic_try_cmpxchg implicitly assigns the *ptr value to &old when cmpxchg fails, enabling further code simplifications. This patch has no functional change. Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: scrub: remove impossible sanity checksQu Wenruo2022-09-261-25/+9
| | | | | | | | | | | | | | | | | | There are several sanity checks which are no longer possible to trigger inside btrfs_scrub_dev(). Since we have mount time check against super block nodesize/sectorsize, and our fixed macro is hardcoded to handle even the worst combination. Thus those sanity checks are no longer needed, can be easily removed. But this patch still uses some ASSERT()s as a safe net just in case we change some features in the future to trigger those impossible combinations. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: delete btrfs_wait_space_cache_v1_finishedJosef Bacik2022-09-262-2/+2
| | | | | | | | | | We used to use this in a few spots, but now we only use it directly inside of block-group.c, so remove the helper and just open code where we were using it. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove lock protection for BLOCK_GROUP_FLAG_RELOCATING_REPAIRJosef Bacik2022-09-261-3/+0
| | | | | | | | | | Before when this was modifying the bit field we had to protect it with the bg->lock, however now we're using bit helpers so we can stop using the bg->lock. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove BLOCK_GROUP_FLAG_HAS_CACHING_CTLJosef Bacik2022-09-262-25/+21
| | | | | | | | | | | | | This is used mostly to determine if we need to look at the caching ctl list and clean up any references to this block group. However we never clear this flag, specifically because we need to know if we have to remove a caching ctl we have for this block group still. This is in the remove block group path which isn't a fast path, so the optimization doesn't really matter, simplify this logic and remove the flag. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: simplify block group traversal in btrfs_put_block_group_cacheJosef Bacik2022-09-261-27/+15
| | | | | | | | | | | | We're breaking out and re-searching for the next block group while evicting any of the block group cache inodes. This is not needed, the block groups aren't disappearing here, we can simply loop through the block groups like normal and iput any inode that we find. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: remove lock protection for BLOCK_GROUP_FLAG_TO_COPYJosef Bacik2022-09-263-9/+0
| | | | | | | | | | | | We use this during device replace for zoned devices, we were simply taking the lock because it was in a bit field and we needed the lock to be safe with other modifications in the bitfield. With the bit helpers we no longer require that locking. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: convert block group bit field to use bit helpersJosef Bacik2022-09-269-56/+71
| | | | | | | | | | | | | We use a bit field in the btrfs_block_group for different flags, however this is awkward because we have to hold the block_group->lock for any modification of any of these fields, and makes the code clunky for a few of these flags. Convert these to a properly flags setup so we can utilize the bit helpers. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: handle space_info setting of bg in btrfs_add_bg_to_space_infoJosef Bacik2022-09-263-28/+13
| | | | | | | | | | | | | | | | | | | | We previously had the pattern of btrfs_update_space_info(all, the, bg, fields, &space_info); link_block_group(bg); bg->space_info = space_info; Now that we're passing the bg into btrfs_add_bg_to_space_info we can do the linking in that function, transforming this to simply btrfs_add_bg_to_space_info(fs_info, bg); and put the link_block_group() and bg->space_info assignment directly in btrfs_add_bg_to_space_info. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: simplify arguments of btrfs_update_space_info and renameJosef Bacik2022-09-263-36/+28
| | | | | | | | | | | This function has grown a bunch of new arguments, and it just boils down to passing in all the block group fields as arguments. Simplify this by passing in the block group itself and updating the space_info fields based on the block group fields directly. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: use btrfs_fs_closing for background bg workJosef Bacik2022-09-261-0/+6
| | | | | | | | | | | For both unused bg deletion and async balance work we'll happily run if the fs is closing. However I want to move these to their own worker thread, and they can be long running jobs, so add a check to see if we're closing and simply bail. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
* btrfs: rename btrfs_insert_file_extent() to btrfs_insert_hole_extent()Omar Sandoval2022-09-265-30/+20
| | | | | | | | | | | btrfs_insert_file_extent() is only ever used to insert holes, so rename it and remove the redundant parameters. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Omar Sandoval <osandov@osandov.com> Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 16:22:34 +0000