summaryrefslogtreecommitdiffstats
path: root/include/linux/pci_regs.h
Commit message (Collapse)AuthorAgeFilesLines
* PCI: Add PCI_EXP_TYPE_PCIE_BRIDGE valueAnthony PERARD2012-02-231-0/+1
| | | | | Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2012-01-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
| * PCI: Fix PCI_EXP_TYPE_RC_EC valueAlex Williamson2012-01-061-1/+1
| | | | | | | | | | | | | | Spec shows this as 1010b = 0xa Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: Fix PRI and PASID consistencyAlex Williamson2012-01-061-2/+2
| | | | | | | | | | | | | | | | These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: More PRI/PASID cleanupAlex Williamson2011-12-051-14/+16
| | | | | | | | | | | | | | | | | | | | | | More consistency cleanups. Drop the _OFF, separate and indent CTRL/CAP/STATUS bit definitions. This helped find the previous mis-use of bit 0 in the PASID capability register. Reviewed-by: Joerg Roedel <joerg.roedel@amd.com> Tested-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: Fix PRI and PASID consistencyAlex Williamson2011-12-051-2/+2
|/ | | | | | | | These are extended capabilities, rename and move to proper group for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add support for PASID capabilityJoerg Roedel2011-10-141-0/+8
| | | | | | | | | | | | Devices supporting Process Address Space Identifiers (PASIDs) can use an IOMMU to access multiple IO address spaces at the same time. A PCIe device indicates support for this feature by implementing the PASID capability. This patch adds support for the capability to the Linux kernel. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add implementation for PRI capabilityJoerg Roedel2011-10-141-0/+12
| | | | | | | | | | | Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add latency tolerance reporting enable/disable supportJesse Barnes2011-05-111-0/+9
| | | | | | | | | | Latency tolerance reporting allows devices to send messages to the root complex indicating their latency tolerance for snooped & unsnooped memory transactions. Add support for enabling & disabling this feature, along with a routine to set the max latencies a device should send upstream. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add OBFF enable/disable supportJesse Barnes2011-05-111-0/+6
| | | | | | | | | | | OBFF (optimized buffer flush/fill), where supported, can help improve energy efficiency by giving devices information about when interrupts and other activity will have a reduced power impact. It requires support from both the device and system (i.e. not only does the device need to respond to OBFF messages, but the platform must be capable of generating and routing them to the end point). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add ID-based ordering enable/disable supportJesse Barnes2011-05-111-0/+2
| | | | | | | | | Add support to allow drivers to enable/disable ID-based ordering. Where supported, ID-based ordering can significantly improve the latency of individual requests by preventing them from queueing up behind unrelated traffic. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Fix common misspellingsLucas De Marchi2011-03-311-2/+2
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* PCI/PCIe: Clear Root PME Status bits early during system resumeRafael J. Wysocki2010-12-231-0/+2
| | | | | | | | | | | | | | | | | | | | I noticed that PCI Express PMEs don't work on my Toshiba Portege R500 after the system has been woken up from a sleep state by a PME (through Wake-on-LAN). After some investigation it turned out that the BIOS didn't clear the Root PME Status bit in the root port that received the wakeup PME and since the Requester ID was also set in the port's Root Status register, any subsequent PMEs didn't trigger interrupts. This problem can be avoided by clearing the Root PME Status bits in all PCI Express root ports during early resume. For this purpose, add an early resume routine to the PCIe port driver and make this driver be always registered, even if pci_ports_disable is set (in which case the driver's only function is to provide the early resume callback). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add mask bit definition for MSI-X tableSheng Yang2010-12-231-0/+1
| | | | | | | | | Then we can use it instead of magic number 1. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: MSI: Move MSI-X entry definition to pci_regs.hSheng Yang2010-12-231-0/+7
| | | | | | | | | Then it can be used by others. Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add PCI_MSIX_TABLE/PBA definesHidetoshi Seto2010-10-171-2/+4
| | | | | | | | These are already defined in pcilib's pci/header.h but not in kernel's linux/pci_regs.h. Copy them to avoid using magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2010-05-211-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
| * PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRCHidetoshi Seto2010-05-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | The Error Source Identification Register (Offset 34h) is 4 byte which contains a couple of 2 byte field, "[15:0] ERR_COR Source Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification." This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck2010-04-271-0/+3
|/ | | | | | | | | This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* x86/PCI: Moorestown PCI supportJesse Barnes2010-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* PCI: populate subsystem vendor and device IDs for PCI bridgesGabe Black2009-11-041-0/+5
| | | | | | | | | Change to populate the subsystem vendor and subsytem device IDs for PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability. Previously bridges left subsystem vendor IDs unpopulated. Signed-off-by: Gabe Black <gabe.black@ni.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: acs p2p upsteram forwarding enablingAllen Kay2009-11-041-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Note: dom0 checking in v4 has been separated out into 2/2. This patch enables P2P upstream forwarding in ACS capable PCIe switches. It solves two potential problems in virtualization environment where a PCIe device is assigned to a guest domain using a HW iommu such as VT-d: 1) Unintentional failure caused by guest physical address programmed into the device's DMA that happens to match the memory address range of other downstream ports in the same PCIe switch. This causes the PCI transaction to go to the matching downstream port instead of go to the root complex to get translated by VT-d as it should be. 2) Malicious guest software intentionally attacks another downstream PCIe device by programming the DMA address into the assigned device that matches memory address range of the downstream PCIe port. We are in process of implementing device filtering software in KVM/XEN management software to allow device assignment of PCIe devices behind a PCIe switch only if it has ACS capability and with the P2P upstream forwarding bits enabled. This patch is intended to work for both KVM and Xen environments. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Reviewed-by: Mathew Wilcox <willy@linux.intel.com> Reviewed-by: Chris Wright <chris@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* uio: add generic driver for PCI 2.3 devicesMichael S. Tsirkin2009-09-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This adds a generic uio driver that can bind to any PCI device. First user will be virtualization where a qemu userspace process needs to give guest OS access to the device. Interrupts are handled using the Interrupt Disable bit in the PCI command register and Interrupt Status bit in the PCI status register. All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should support these bits. Driver detects this support, and won't bind to devices which do not support the Interrupt Disable Bit in the command register. It's expected that more features of interest to virtualization will be added to this driver in the future. Possibilities are: mmap for device resources, MSI/MSI-X, eventfd (to interface with kvm), iommu. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds2009-06-221-0/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
| * PCI: support the ATS capabilityYu Zhao2009-05-181-0/+10
| | | | | | | | | | | | | | | | | | | | | | The PCIe ATS capability makes the Endpoint be able to request the DMA address translation from the IOMMU and cache the translation in the device side, thus alleviate IOMMU pressure and improve the hardware performance in the I/O virtualization environment. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | PCI MSI: Define PCI_MSI_MASK_32/64Hidetoshi Seto2009-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | Impact: cleanup, improve readability Define PCI_MSI_MASK_32/64 for 32/64bit devices, instead of using implicit offset (-4), "PCI_MSI_MASK_BIT - 4" and "PCI_MSI_MASK_BIT". Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI MSI: Remove unused/obsolete macros and definitionsHidetoshi Seto2009-06-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup, spec compliance This patch does: - Remove unused msi/msix_enable/disable macros. User should use msi/msix_set_enable() functions instead. - Remove unused msix_mask/unmask/pending macros. These macros are useless because they are not based on any of the PCI Local Bus Specifications properly. It seems that they were written based on a draft of PCI spec, and that the draft was the MSI-X ECN that underwent membership review in September 2002. (* In the draft, the size of a entry in MSI-X table was 64bit, containing 32bit message data and DWORD aligned lower address plus a pending bit and a mask bit.(30+1+1bit) The higher address was placed in MSI-X capability structure and shared by all entries.) - Remove PCI_MSIX_FLAGS_BITMASK. This definition also come from the draft ECN. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: only save/restore existent registers in the PCIe capabilityYu Zhao2009-04-221-0/+1
|/ | | | | | | | | | | | | | | PCIe 1.1 base neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. So we only save and restore registers that must be implemented by different device types if the device PCIe capability version is 1. PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires all registers in the PCIe capability to be either implemented or hardwired to 0. Their PCIe capability version is 2. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: save and restore PCIe 2.0 registersYu Zhao2009-03-261-0/+2
| | | | | | | | | PCIe 2.0 defines several new registers (Device Control 2, Link Control 2, and Slot Control 2). Save and retore them in pci_save_pcie_state() and pci_restore_pcie_state(). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: initialize and release SR-IOV capabilityYu Zhao2009-03-201-0/+33
| | | | | | | | | | | | If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix incorrect mask of PM No_Soft_Reset bitYu Zhao2009-03-201-1/+1
| | | | | | Reviewed-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: cleanup register and field definitionsKenji Kaneshige2009-01-071-7/+57
| | | | | | | | | | | | | Clean up register definitions related to PCI Express Hot plug. - Add register definitions into include/linux/pci_regs.h, and use them instead of pciehp's locally definied register definitions. - Remove pciehp's locally defined register definitions - Remove unused register definitions in pciehp. - Some minor cleanups. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add PCI Advanced Feature Capability definesSheng Yang2009-01-071-0/+12
| | | | | | | | | | PCI Advanced Features Capability is introduced by "Conventional PCI Advanced Caps ECN" (can be downloaded in pcisig.com). Add defines for the various AF capabilities, including function level reset (FLR). Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add support for function level resetSheng Yang2008-10-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Sometimes, it's necessary to enable software's ability to quiesce and reset endpoint hardware with function-level granularity, so provide support for it. The patch implement Function Level Reset(FLR) feature following PCI-e spec. And this is the first step. We would add more generic method, like D0/D3, to allow more devices support this function. The patch contains two functions. pcie_reset_function() is the new driver API, and, contains some action to quiesce a device. The other function is a helper: pcie_execute_reset_function() just executes the reset for a particular device function. Current the usage model is in KVM. Function reset is necessary for assigning device to a guest, or moving it between partitions. For Function Level Reset(FLR), please refer to PCI Express spec chapter 6.6.2. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: support PCIe ARI capabilityYu Zhao2008-10-201-0/+14
| | | | | | | | | | | | This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: disable ASPM on pre-1.1 PCIe devicesShaohua Li2008-07-281-0/+1
| | | | | | | | | Disable ASPM on pre-1.1 PCIe devices, as many of them don't implement it correctly. Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Simplify PCI device PM codeRafael J. Wysocki2008-07-071-0/+1
| | | | | | | | | | If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add PCI Express ASPM supportShaohua Li2008-04-201-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman2008-02-021-8/+0
| | | | | | | | | | | This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: PCIE ASPM supportShaohua Li2008-02-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: modify PCI bridge control ISA flag for clarityGary Hade2007-10-121-1/+1
| | | | | | | | | | | | | | | | Modify PCI Bridge Control ISA flag for clarity This patch changes PCI_BRIDGE_CTL_NO_ISA to PCI_BRIDGE_CTL_ISA and modifies it's clarifying comment and locations where used. The change reduces the chance of future confusion since it makes the set/unset meaning of the bit the same in both the bridge control register and bridge_ctl field of the pci_bus struct. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Add missing PCI capability IDsAlex Chiang2007-10-121-1/+5
| | | | | | | | | | These IDs are in pciutils, but haven't been added to the kernel yet. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [TG3]: Walk PCI capability lists.Matt Carlson2007-10-101-0/+13
| | | | | | | | | | | Newer tg3 devices shuffle around the registers in PCI configuration space. This patch changes the way the driver accesses the PCI capabilities registers. Hardcoded register locations are replaced with offsets from pci_find_capability() return values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] msi: Safer state caching.Eric W. Biederman2007-03-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two ways pci_save_state and pci_restore_state are used. As helper functions during suspend/resume, and as helper functions around a hardware reset event. When used as helper functions around a hardware reset event there is no reason to believe the calls will be paired, nor is there a good reason to believe that if we restore the msi state from before the reset that it will match the current msi state. Since arch code may change the msi message without going through the driver, drivers currently do not have enough information to even know when to call pci_save_state to ensure they will have msi state in sync with the other kernel irq reception data structures. It turns out the solution is straight forward, cache the state in the existing msi data structures (not the magic pci saved things) and have the msi code update the cached state each time we write to the hardware. This means we never need to read the hardware to figure out what the hardware state should be. By modifying the caching in this manner we get to remove our save_state routines and only need to provide restore_state routines. The only fields that were at all tricky to regenerate were the msi and msi-x control registers and the way we regenerate them currently is a bit dependent upon assumptions on how we use the allow msi registers to be configured and used making the code a little bit brittle. If we ever change what cases we allow or how we configure the msi bits we can address the fragility then. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] msi: sanely support hardware level msi disablingEric W. Biederman2007-03-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Add #defines for Hypertransport MSI fieldsMichael Ellerman2006-12-201-0/+7
| | | | | | | | | Add a few #defines for grabbing and working with the address fields in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Add pci_find_ht_capability() for finding Hypertransport capabilitiesMichael Ellerman2006-12-201-1/+11
| | | | | | | | | | | | | | | | | | There are already several places in the kernel that want to search a PCI device for a given Hypertransport capability. Although this is possible using pci_find_capability() etc., it makes sense to encapsulate that logic in a helper - pci_find_ht_capability(). To cater for searching exhaustively for a capability, we also provide pci_find_next_ht_capability(). We also need to cater for the fact that the HT capability fields may be either 3 or 5 bits wide. pci_find_ht_capability() deals with this for you, but callers using the #defines directly must handle that themselves. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Make some MSI-X #defines genericMichael Ellerman2006-12-011-0/+6
| | | | | | | | | Move some MSI-X #defines into pci_regs.h so they can be used outside of drivers/pci. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [TG3]: Disable TSO on 5906 if CLKREQ is enabled.Michael Chan2006-11-151-0/+1
| | | | | | | | | | | Due to hardware errata, TSO must be disabled if the PCI Express clock request is enabled on 5906. The chip may hang when transmitting TSO frames if CLKREQ is enabled. Update version to 3.69. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] Add Hypertransport capability definesEric W. Biederman2006-10-041-0/+21
| | | | | | | | | | | | This adds defines for the hypertransport capability subtypes and starts using them a little. [akpm@osdl.org: fix typo] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 19:42:29 +0000