summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* net: stmmac: overwrite the dma_cap.addr64 according to HW designFugang Duan2020-12-211-0/+1
| | | | | | | | | | | | | | | [ Upstream commit f119cc9818eb33b66e977ad3af75aef6500bbdc3 ] The current IP register MAC_HW_Feature1[ADDR64] only defines 32/40/64 bit width, but some SOCs support others like i.MX8MP support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64]. So overwrite dma_cap.addr64 according to HW real design. Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: mscc: ocelot: fix dropping of unknown IPv4 multicast on SevilleVladimir Oltean2020-12-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit edd2410b165e2ef00b2264ae362edf7441ca929c ] The current assumption is that the felix DSA driver has flooding knobs per traffic class, while ocelot switchdev has a single flooding knob. This was correct for felix VSC9959 and ocelot VSC7514, but with the introduction of seville VSC9953, we see a switch driven by felix.c which has a single flooding knob. So it is clear that we must do what should have been done from the beginning, which is not to overwrite the configuration done by ocelot.c in felix, but instead to teach the common ocelot library about the differences in our switches, and set up the flooding PGIDs centrally. The effect that the bogus iteration through FELIX_NUM_TC has upon seville is quite dramatic. ANA_FLOODING is located at 0x00b548, and ANA_FLOODING_IPMC is located at 0x00b54c. So the bogus iteration will actually overwrite ANA_FLOODING_IPMC when attempting to write ANA_FLOODING[1]. There is no ANA_FLOODING[1] in sevile, just ANA_FLOODING. And when ANA_FLOODING_IPMC is overwritten with a bogus value, the effect is that ANA_FLOODING_IPMC gets the value of 0x0003CF7D: MC6_DATA = 61, MC6_CTRL = 61, MC4_DATA = 60, MC4_CTRL = 0. Because MC4_CTRL is zero, this means that IPv4 multicast control packets are not flooded, but dropped. An invalid configuration, and this is how the issue was actually spotted. Reported-by: Eldar Gasanov <eldargasanov2@gmail.com> Reported-by: Maxim Kochetkov <fido_max@inbox.ru> Tested-by: Eldar Gasanov <eldargasanov2@gmail.com> Fixes: 84705fc16552 ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 3c7b51bd39b2 ("net: dsa: felix: allow flooding for all traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201204175416.1445937-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()Peilin Ye2020-12-211-1/+2
| | | | | | | | | | | | | | | | | | | commit 0032ce0f85a269a006e91277be5fdbc05fad8426 upstream. ptrace_get_syscall_info() is potentially copying uninitialized stack memory to userspace, since the compiler may leave a 3-byte hole near the beginning of `info`. Fix it by adding a padding field to `struct ptrace_syscall_info`. Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200801152044.230416-1-yepeilin.cs@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compiler.h: fix barrier_data() on clangArvind Sankar2020-12-164-27/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3347acc6fcd4ee71ad18a9ff9d9dac176b517329 upstream. Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") neglected to copy barrier_data() from compiler-gcc.h into compiler-clang.h. The definition in compiler-gcc.h was really to work around clang's more aggressive optimization, so this broke barrier_data() on clang, and consequently memzero_explicit() as well. For example, this results in at least the memzero_explicit() call in lib/crypto/sha256.c:sha256_transform() being optimized away by clang. Fix this by moving the definition of barrier_data() into compiler.h. Also move the gcc/clang definition of barrier() into compiler.h, __memory_barrier() is icc-specific (and barrier() is already defined using it in compiler-intel.h) and doesn't belong in compiler.h. [rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled] Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* kbuild: avoid static_assert for genksymsArnd Bergmann2020-12-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 14dc3983b5dff513a90bd5a8cc90acaf7867c3d0 upstream. genksyms does not know or care about the _Static_assert() built-in, and sometimes falls back to ignoring the later symbols, which causes undefined behavior such as WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned. ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation Redefine static_assert for genksyms to avoid that. Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Kees Cook <keescook@chromium.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen: don't use page->lru for ZONE_DEVICE memoryJuergen Gross2020-12-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | commit ee32f32335e8c7f6154bf397f4ac9b6175b488a8 upstream. Commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") introduced usage of ZONE_DEVICE memory for foreign memory mappings. Unfortunately this collides with using page->lru for Xen backend private page caches. Fix that by using page->zone_device_data instead. Cc: <stable@vger.kernel.org> # 5.9 Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Reviewed-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen: add helpers for caching grant mapping pagesJuergen Gross2020-12-161-0/+13
| | | | | | | | | | | | | | | | commit ca33479cc7be2c9b5f8be078c8bf3ac26b7d6186 upstream. Instead of having similar helpers in multiple backend drivers use common helpers for caching pages allocated via gnttab_alloc_pages(). Make use of those helpers in blkback and scsiback. Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net, xsk: Avoid taking multiple skbuff referencesBjörn Töpel2020-12-161-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 36ccdf85829a7dd6936dba5d02fa50138471f0d3 ] Commit 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY") addressed the problem that packets were discarded from the Tx AF_XDP ring, when the driver returned NETDEV_TX_BUSY. Part of the fix was bumping the skbuff reference count, so that the buffer would not be freed by dev_direct_xmit(). A reference count larger than one means that the skbuff is "shared", which is not the case. If the "shared" skbuff is sent to the generic XDP receive path, netif_receive_generic_xdp(), and pskb_expand_head() is entered the BUG_ON(skb_shared(skb)) will trigger. This patch adds a variant to dev_direct_xmit(), __dev_direct_xmit(), where a user can select the skbuff free policy. This allows AF_XDP to avoid bumping the reference count, but still keep the NETDEV_TX_BUSY behavior. Fixes: 642e450b6b59 ("xsk: Do not discard packet when NETDEV_TX_BUSY") Reported-by: Yonghong Song <yhs@fb.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201123175600.146255-1-bjorn.topel@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
* mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPINGMinchan Kim2020-12-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e91d8d78237de8d7120c320b3645b7100848f24d upstream. While I was doing zram testing, I found sometimes decompression failed since the compression buffer was corrupted. With investigation, I found below commit calls cond_resched unconditionally so it could make a problem in atomic context if the task is reschedule. BUG: sleeping function called from invalid context at mm/vmalloc.c:108 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog 3 locks held by memhog/946: #0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160 #1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160 #2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0 CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014 Call Trace: unmap_kernel_range_noflush+0x2eb/0x350 unmap_kernel_range+0x14/0x30 zs_unmap_object+0xd5/0xe0 zram_bvec_rw.isra.0+0x38c/0x8e0 zram_rw_page+0x90/0x101 bdev_write_page+0x92/0xe0 __swap_writepage+0x94/0x4a0 pageout+0xe3/0x3a0 shrink_page_list+0xb94/0xd60 shrink_inactive_list+0x158/0x460 We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which contains the offending calling code) from zsmalloc. Even though this option showed some amount improvement(e.g., 30%) in some arm32 platforms, it has been headache to maintain since it have abused APIs[1](e.g., unmap_kernel_range in atomic context). Since we are approaching to deprecate 32bit machines and already made the config option available for only builtin build since v5.8, lastly it has been not default option in zsmalloc, it's time to drop the option for better maintenance. [1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org Fixes: e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range") Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Harish Sriram <harish@linux.ibm.com> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nftables_offload: build mask based from the matching bytesPablo Neira Ayuso2020-12-111-0/+3
| | | | | | | | | | | | | | | | | | | commit a5d45bc0dc50f9dd83703510e9804d813a9cac32 upstream. Userspace might match on prefix bytes of header fields if they are on the byte boundary, this requires that the mask is adjusted accordingly. Use NFT_OFFLOAD_MATCH_EXACT() for meta since prefix byte matching is not allowed for this type of selector. The bitwise expression might be optimized out by userspace, hence the kernel needs to infer the prefix from the number of payload bytes to match on. This patch adds nft_payload_offload_mask() to calculate the bitmask to match on the prefix. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nftables_offload: set address type in control dissectorPablo Neira Ayuso2020-12-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit 3c78e9e0d33a27ab8050e4492c03c6a1f8d0ed6b upstream. This patch adds nft_flow_rule_set_addr_type() to set the address type from the nft_payload expression accordingly. If the address type is not set in the control dissector then a rule that matches either on source or destination IP address does not work. After this patch, nft hardware offload generates the flow dissector configuration as tc-flower does to match on an IP address. This patch has been also tested functionally to make sure packets are filtered out by the NIC. This is also getting the code aligned with the existing netfilter flow offload infrastructure which is also setting the control dissector. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* genirq/irqdomain: Add an irq_create_mapping_affinity() functionLaurent Vivier2020-12-111-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit bb4c6910c8b41623104c2e64a30615682689a54d upstream. There is currently no way to convey the affinity of an interrupt via irq_create_mapping(), which creates issues for devices that expect that affinity to be managed by the kernel. In order to sort this out, rename irq_create_mapping() to irq_create_mapping_affinity() with an additional affinity parameter that can be passed down to irq_domain_alloc_descs(). irq_create_mapping() is re-implemented as a wrapper around irq_create_mapping_affinity(). No functional change. Fixes: e75eafb9b039 ("genirq/msi: Switch to new irq spreading infrastructure") Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kurz <groug@kaod.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201126082852.1178497-2-lvivier@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Fix ->session lockingJann Horn2020-12-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream. Currently, locking of ->session is very inconsistent; most places protect it using the legacy tty mutex, but disassociate_ctty(), __do_SAK(), tiocspgrp() and tiocgsid() don't. Two of the writers hold the ctrl_lock (because they already need it for ->pgrp), but __proc_set_tty() doesn't do that yet. On a PREEMPT=y system, an unprivileged user can theoretically abuse this broken locking to read 4 bytes of freed memory via TIOCGSID if tiocgsid() is preempted long enough at the right point. (Other things might also go wrong, especially if root-only ioctls are involved; I'm not sure about that.) Change the locking on ->session such that: - tty_lock() is held by all writers: By making disassociate_ctty() hold it. This should be fine because the same lock can already be taken through the call to tty_vhangup_session(). The tricky part is that we need to shorten the area covered by siglock to be able to take tty_lock() without ugly retry logic; as far as I can tell, this should be fine, since nothing in the signal_struct is touched in the `if (tty)` branch. - ctrl_lock is held by all writers: By changing __proc_set_tty() to hold the lock a little longer. - All readers that aren't holding tty_lock() hold ctrl_lock: By adding locking to tiocgsid() and __do_SAK(), and expanding the area covered by ctrl_lock in tiocspgrp(). Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uapi: fix statx attribute value overlap for DAX & MOUNT_ROOTEric Sandeen2020-12-081-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | commit 72d1249e2ffdbc344e465031ec5335fa3489d62e upstream. STATX_ATTR_MOUNT_ROOT and STATX_ATTR_DAX got merged with the same value, so one of them needs fixing. Move STATX_ATTR_DAX. While we're in here, clarify the value-matching scheme for some of the attributes, and explain why the value for DAX does not match. Fixes: 80340fe3605c ("statx: add mount_root") Fixes: 712b2698e4c0 ("fs/stat: Define DAX statx attribute") Link: https://lore.kernel.org/linux-fsdevel/7027520f-7c79-087e-1d00-743bdefa1a1e@redhat.com/ Link: https://lore.kernel.org/lkml/20201202214629.1563760-1-ira.weiny@intel.com/ Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: <stable@vger.kernel.org> # 5.8 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steeringYevgeny Kliteynik2020-12-081-1/+8
| | | | | | | | | | | | | | | | | [ Upstream commit d421e466c2373095f165ddd25cbabd6c5b077928 ] STEs format for Connect-X5 and Connect-X6DX different. Currently, on Connext-X6DX the SW steering would break at some point when building STEs w/o giving a proper error message. Fix this by checking the STE format of the current device when initializing domain: add mlx5_ifc definitions for Connect-X6DX SW steering, read FW capability to get the current format version, and check this version when domain is being created. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* inet_ecn: Fix endianness of checksum update when setting ECT(1)Toke Høiland-Jørgensen2020-12-081-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit 2867e1eac61016f59b3d730e3f7aa488e186e917 ] When adding support for propagating ECT(1) marking in IP headers it seems I suffered from endianness-confusion in the checksum update calculation: In fact the ECN field is in the *lower* bits of the first 16-bit word of the IP header when calculating in network byte order. This means that the addition performed to update the checksum field was wrong; let's fix that. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Reported-by: Jonathan Morton <chromatix99@gmail.com> Tested-by: Pete Heist <pete@heistp.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/packet: fix packet receive on L3 devices without visible hard headerEyal Birger2020-12-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d549699048b4b5c22dd710455bcdb76966e55aa3 ] In the patchset merged by commit b9fcf0a0d826 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which did not have header_ops were given one for the purpose of protocol parsing on af_packet transmit path. That change made af_packet receive path regard these devices as having a visible L3 header and therefore aligned incoming skb->data to point to the skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not reset their mac_header prior to ingress and therefore their incoming packets became malformed. Ideally these devices would reset their mac headers, or af_packet would be able to rely on dev->hard_header_len being 0 for such cases, but it seems this is not the case. Fix by changing af_packet RX ll visibility criteria to include the existence of a '.create()' header operation, which is used when creating a device hard header - via dev_hard_header() - by upper layers, and does not exist in these L3 devices. As this predicate may be useful in other situations, add it as a common dev_has_header() helper in netdevice.h. Fixes: b9fcf0a0d826 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/tls: Protect from calling tls_dev_del for TLS RX twiceMaxim Mikityanskiy2020-12-081-0/+6
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 025cc2fb6a4e84e9a0552c0017dcd1c24b7ac7da ] tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after calling tls_dev_del if TLX TX offload is also enabled. Clearing tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a time frame when tls_device_down may get called and call tls_dev_del for RX one extra time, confusing the driver, which may lead to a crash. This patch corrects this racy behavior by adding a flag to prevent tls_device_down from calling tls_dev_del the second time. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: openvswitch: fix TTL decrement action netlink message formatEelco Chaudron2020-12-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 69929d4c49e182f8526d42c43b37b460d562d3a0 ] Currently, the openvswitch module is not accepting the correctly formated netlink message for the TTL decrement action. For both setting and getting the dec_ttl action, the actions should be nested in the OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi. When the original patch was sent, it was tested with a private OVS userspace implementation. This implementation was unfortunately not upstreamed and reviewed, hence an erroneous version of this patch was sent out. Leaving the patch as-is would cause problems as the kernel module could interpret additional attributes as actions and vice-versa, due to the actions not being encapsulated/nested within the actual attribute, but being concatinated after it. Fixes: 744676e77720 ("openvswitch: add TTL decrement action") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bonding: wait for sysfs kobject destruction before freeing struct slaveJamie Iles2020-12-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b9ad3e9f5a7a760ab068e33e1f18d240ba32ce92 ] syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a struct slave device could result in the following splat: kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000) bond0 (unregistering): (slave bond_slave_1): Releasing backup interface ------------[ cut here ]------------ ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600 WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S 5.9.0-rc8+ #96 Hardware name: linux,dummy-virt (DT) Workqueue: netns cleanup_net Call trace: dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239 show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x174/0x1f8 lib/dump_stack.c:118 panic+0x360/0x7a0 kernel/panic.c:231 __warn+0x244/0x2ec kernel/panic.c:600 report_bug+0x240/0x398 lib/bug.c:198 bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974 call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322 brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329 do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864 el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65 el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93 el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594 debug_print_object+0x180/0x240 lib/debugobjects.c:485 __debug_check_no_obj_freed lib/debugobjects.c:967 [inline] debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998 slab_free_hook mm/slub.c:1536 [inline] slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577 slab_free mm/slub.c:3138 [inline] kfree+0x13c/0x460 mm/slub.c:4119 bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492 __bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline] bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420 notifier_call_chain+0xf0/0x200 kernel/notifier.c:83 __raw_notifier_call_chain kernel/notifier.c:361 [inline] raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368 call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347 unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509 unregister_netdevice_many net/core/dev.c:10508 [inline] default_device_exit_batch+0x294/0x338 net/core/dev.c:10992 ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189 cleanup_net+0x44c/0x888 net/core/net_namespace.c:603 process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269 worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415 kthread+0x390/0x498 kernel/kthread.c:292 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925 This is a potential use-after-free if the sysfs nodes are being accessed whilst removing the struct slave, so wait for the object destruction to complete before freeing the struct slave itself. Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.") Fixes: a068aab42258 ("bonding: Fix reference count leak in bond_sysfs_slave_add.") Cc: Qiushi Wu <wu000273@umn.edu> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann2020-12-021-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cef397038167ac15d085914493d6c86385773709 ] Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bus: ti-sysc: Fix reset status check for modules with quirksTony Lindgren2020-12-021-0/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit e275d2109cdaea8b4554b9eb8a828bdb8f8ba068 ] Commit d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") started showing a "OCP softreset timed out" warning on enable if the interconnect target module is not out of reset. This caused the warning to be often triggered for i2c and hdq while the devices are working properly. Turns out that some interconnect target modules seem to have an unusable reset status bits unless the module specific reset quirks are activated. Let's just skip the reset status check for those modules as we only want to activate the reset quirks when doing a reset, and not on enable. This way we don't see the bogus "OCP softreset timed out" warnings during boot. Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* scsi: libiscsi: Fix NOP race conditionLee Duncan2020-12-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fe0a8a95e7134d0b44cd407bc0085b9ba8d8fe31 ] iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid daemon instead of handled in the kernel, as they should be, resulting in a message from the daemon like: iscsid: Got nop in, but kernel supports nop handling. This can occur because of the new forward- and back-locks, and the fact that an iSCSI NOP response can occur before processing of the NOP send is complete. This can result in "conn->ping_task" being NULL in iscsi_nop_out_rsp(), when the pointer is actually in the process of being set. To work around this, we add a new state to the "ping_task" pointer. In addition to NULL (not assigned) and a pointer (assigned), we add the state "being set", which is signaled with an INVALID pointer (using "-1"). Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* kunit: fix display of failed expectations for stringsDaniel Latypov2020-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3084db0e0d5076cd48408274ab0911cd3ccdae88 ] Currently the following expectation KUNIT_EXPECT_STREQ(test, "hi", "bye"); will produce: Expected "hi" == "bye", but "hi" == 1625079497 "bye" == 1625079500 After this patch: Expected "hi" == "bye", but "hi" == hi "bye" == bye KUNIT_INIT_BINARY_STR_ASSERT_STRUCT() was written but just mistakenly not actually used by KUNIT_EXPECT_STREQ() and friends. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* trace: fix potenial dangerous pointerHui Su2020-12-021-4/+4
| | | | | | | | | | | | | | | | | | | commit fdeb17c70c9ecae655378761accf5a26a55a33cf upstream. The bdi_dev_name() returns a char [64], and the __entry->name is a char [32]. It maybe dangerous to TP_printk("%s", __entry->name) after the strncpy(). CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware: xilinx: Use hash-table for api feature checkAmit Sunil Dhamne2020-12-021-4/+0
| | | | | | | | | | | | | | | | | | | | | | | commit acfdd18591eaac25446e976a0c0d190f8b3dbfb1 upstream. Currently array of fix length PM_API_MAX is used to cache the pm_api version (valid or invalid). However ATF based PM APIs values are much higher then PM_API_MAX. So to include ATF based PM APIs also, use hash-table to store the pm_api version status. Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ravi Patel <ravi.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com> Fixes: f3217d6f2f7a ("firmware: xilinx: fix out-of-bounds access") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: fix readahead_page_batch for retry entriesMatthew Wilcox (Oracle)2020-11-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4349a83a3190c1d4414371161b0f4a4c3ccd3f9d upstream. Both btrfs and fuse have reported faults caused by seeing a retry entry instead of the page they were looking for. This was caused by a missing check in the iterator. As can be seen in the below panic log, the accessing 0x402 causes a panic. In the xarray.h, 0x402 means RETRY_ENTRY. BUG: kernel NULL pointer dereference, address: 0000000000000402 CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1 Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020 RIP: 0010:fuse_readahead+0x152/0x470 [fuse] Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01 RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246 RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60 RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0 R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68 FS: 00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0 Call Trace: read_pages+0x83/0x270 page_cache_readahead_unbounded+0x197/0x230 generic_file_buffered_read+0x57a/0xa20 new_sync_read+0x112/0x1a0 vfs_read+0xf8/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 042124cc64c3 ("mm: add new readahead_control API") Reported-by: David Sterba <dsterba@suse.com> Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: Introduce device-managed SPI controller allocationLukas Wunner2020-11-241-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 upstream. SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sched: Fix data-race in wakeupPeter Zijlstra2020-11-241-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f97bb5272d9e95d400d6c8643ebb146b3e3e7842 ] Mel reported that on some ARM64 platforms loadavg goes bananas and Will tracked it down to the following race: CPU0 CPU1 schedule() prev->sched_contributes_to_load = X; deactivate_task(prev); try_to_wake_up() if (p->on_rq &&) // false if (smp_load_acquire(&p->on_cpu) && // true ttwu_queue_wakelist()) p->sched_remote_wakeup = Y; smp_store_release(prev->on_cpu, 0); where both p->sched_contributes_to_load and p->sched_remote_wakeup are in the same word, and thus the stores X and Y race (and can clobber one another's data). Whereas prior to commit c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") the p->on_cpu handoff serialized access to p->sched_remote_wakeup (just as it still does with p->sched_contributes_to_load) that commit broke that by calling ttwu_queue_wakelist() with p->on_cpu != 0. However, due to p->XXX = X ttwu() schedule() if (p->on_rq && ...) // false smp_mb__after_spinlock() if (smp_load_acquire(&p->on_cpu) && deactivate_task() ttwu_queue_wakelist()) p->on_rq = 0; p->sched_remote_wakeup = Y; We can be sure any 'current' store is complete and 'current' is guaranteed asleep. Therefore we can move p->sched_remote_wakeup into the current flags word. Note: while the observed failure was loadavg accounting gone wrong due to ttwu() cobbering p->sched_contributes_to_load, the reverse problem is also possible where schedule() clobbers p->sched_remote_wakeup, this could result in enqueue_entity() wrecking ->vruntime and causing scheduling artifacts. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Mel Gorman <mgorman@techsingularity.net> Debugged-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201117083016.GK3121392@hirez.programming.kicks-ass.net Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/vt-d: Avoid panic if iommu init fails in tboot systemZhenzhong Duan2020-11-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4d213e76a359e540ca786ee937da7f35faa8e5f8 ] "intel_iommu=off" command line is used to disable iommu but iommu is force enabled in a tboot system for security reason. However for better performance on high speed network device, a new option "intel_iommu=tboot_noforce" is introduced to disable the force on. By default kernel should panic if iommu init fail in tboot for security reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off". Fix the code setting force_on and move intel_iommu_tboot_noforce from tboot code to intel iommu code. Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Tested-by: Lukasz Hawrylko <lukasz.hawrylko@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* iommu/vt-d: Move intel_iommu_gfx_mapped to Intel IOMMU headerAndy Shevchenko2020-11-242-4/+2
| | | | | | | | | | | | | | | | [ Upstream commit c7eb900f5f45eeab1ea1bed997a2a12d8b5907bc ] Static analyzer is not happy about intel_iommu_gfx_mapped declaration: .../drivers/iommu/intel/iommu.c:364:5: warning: symbol 'intel_iommu_gfx_mapped' was not declared. Should it be static? Move its declaration to Intel IOMMU header file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200828161212.71294-1-andriy.shevchenko@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip_tunnels: Set tunnel option flag when tunnel metadata is presentYi-Hung Wei2020-11-241-3/+4
| | | | | | | | | | | | | | | | | | [ Upstream commit 9c2e14b48119b39446031d29d994044ae958d8fc ] Currently, we may set the tunnel option flag when the size of metadata is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function no matter the geneve option is present or not. As this may result in issues on the tunnel flags consumers, this patch fixes the issue. Related discussion: * https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u Fixes: 256c87c17c53 ("net: check tunnel option type in tunnel flags") Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* SUNRPC: Fix oops in the rpc_xdr_buf event classScott Mayhew2020-11-241-1/+2
| | | | | | | | | | | | | [ Upstream commit c3213d260a23e263ef85ba21ac68c9e7578020b5 ] Backchannel rpc tasks don't have task->tk_client set, so it's necessary to check it for NULL before dereferencing. Fixes: c509f15a5801 ("SUNRPC: Split the xdr_buf event class") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* swiotlb: using SIZE_MAX needs limits.h includedStephen Rothwell2020-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f51778db088b2407ec177f2f4da0f6290602aa3f ] After merging the drm-misc tree, linux-next build (arm multi_v7_defconfig) failed like this: In file included from drivers/gpu/drm/nouveau/nouveau_ttm.c:26: include/linux/swiotlb.h: In function 'swiotlb_max_mapping_size': include/linux/swiotlb.h:99:9: error: 'SIZE_MAX' undeclared (first use in this function) 99 | return SIZE_MAX; | ^~~~~~~~ include/linux/swiotlb.h:7:1: note: 'SIZE_MAX' is defined in header '<stdint.h>'; did you forget to '#include <stdint.h>'? 6 | #include <linux/init.h> +++ |+#include <stdint.h> 7 | #include <linux/types.h> include/linux/swiotlb.h:99:9: note: each undeclared identifier is reported only once for each function it appears in 99 | return SIZE_MAX; | ^~~~~~~~ Caused by commit abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()") but only exposed by commit "drm/nouveu: fix swiotlb include" Fix it by including linux/limits.h as appropriate. Fixes: abe420bfae52 ("swiotlb: Introduce swiotlb_max_mapping_size()") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20201102124327.2f82b2a7@canb.auug.org.au Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/tls: Fix wrong record sn in async mode of device resyncTariq Toukan2020-11-241-1/+15
| | | | | | | | | | | | | | | | | [ Upstream commit 138559b9f99d3b6b1d5e75c78facc067a23871c6 ] In async_resync mode, we log the TCP seq of records until the async request is completed. Later, in case one of the logged seqs matches the resync request, we return it, together with its record serial number. Before this fix, we mistakenly returned the serial number of the current record instead. Fixes: ed9b7646b06a ("net/tls: Add asynchronous resync") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PM: runtime: Add pm_runtime_resume_and_get to deal with usage counterZhang Qilong2020-11-241-0/+21
| | | | | | | | | | | | | | | | | [ Upstream commit dd8088d5a8969dc2b42f71d7bc01c25c61a78066 ] In many case, we need to check return value of pm_runtime_get_sync, but it brings a trouble to the usage counter processing. Many callers forget to decrease the usage counter when it failed, which could resulted in reference leak. It has been discussed a lot[0][1]. So we add a function to deal with the usage counter for better coding. [0]https://lkml.org/lkml/2020/6/14/88 [1]https://patchwork.ozlabs.org/project/linux-tegra/list/?series=178139 Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Exempt multicast addresses from five-second neighbor lifetimeJeff Dike2020-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8cf8821e15cd553339a5b48ee555a0439c2b2742 ] Commit 58956317c8de ("neighbor: Improve garbage collection") guarantees neighbour table entries a five-second lifetime. Processes which make heavy use of multicast can fill the neighour table with multicast addresses in five seconds. At that point, neighbour entries can't be GC-ed because they aren't five seconds old yet, the kernel log starts to fill up with "neighbor table overflow!" messages, and sends start to fail. This patch allows multicast addresses to be thrown out before they've lived out their five seconds. This makes room for non-multicast addresses and makes messages to all addresses more reliable in these circumstances. Fixes: 58956317c8de ("neighbor: Improve garbage collection") Signed-off-by: Jeff Dike <jdike@akamai.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cpufreq: Add strict_target to struct cpufreq_policyRafael J. Wysocki2020-11-181-0/+6
| | | | | | | | | | | | | | commit ea9364bbadf11f0c55802cf11387d74f524cee84 upstream. Add a new field to be set when the CPUFREQ_GOV_STRICT_TARGET flag is set for the current governor to struct cpufreq_policy, so that the drivers needing to check CPUFREQ_GOV_STRICT_TARGET do not have to access the governor object during every frequency transition. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGETRafael J. Wysocki2020-11-181-0/+3
| | | | | | | | | | | | | | commit 218f66870181bec7aaa6e3c72f346039c590c3c2 upstream. Introduce a new governor flag, CPUFREQ_GOV_STRICT_TARGET, for the governors that want the target frequency to be set exactly to the given value without leaving any room for adjustments on the hardware side and set this flag for the powersave and performance governors. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cpufreq: Introduce governor flagsRafael J. Wysocki2020-11-181-2/+7
| | | | | | | | | | | | | | | | commit 9a2a9ebc0a758d887ee06e067e9f7f0b36ff7574 upstream. A new cpufreq governor flag will be added subsequently, so replace the bool dynamic_switching fleid in struct cpufreq_governor with a flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for the "dynamic switching" governors instead of it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* block: add a return value to set_capacity_revalidate_and_notifyChristoph Hellwig2020-11-181-1/+1
| | | | | | | | | | | | | commit 7e890c37c25c7cbca37ff0ab292873d8146e713b upstream. Return if the function ended up sending an uevent or not. Cc: stable@vger.kernel.org # v5.9 Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: memcontrol: fix missing wakeup polling threadMuchun Song2020-11-181-2/+9
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 8b21ca0218d29cc6bb7028125c7e5a10dfb4730c ] When we poll the swap.events, we can miss being woken up when the swap event occurs. Because we didn't notify. Fixes: f3a53a3a1e5b ("mm, memcontrol: implement memory.swap.events") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Yafang Shao <laoar.shao@gmail.com> Cc: Chris Down <chris@chrisdown.name> Cc: Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/20201105161936.98312-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* SUNRPC: Fix general protection fault in trace_rpc_xdr_overflow()Chuck Lever2020-11-181-4/+4
| | | | | | | | | | | | [ Upstream commit d321ff589c16d8c2207485a6d7fbdb14e873d46e ] The TP_fast_assign() section is careful enough not to dereference xdr->rqst if it's NULL. The TP_STRUCT__entry section is not. Fixes: 5582863f450c ("SUNRPC: Add XDR overflow trace event") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSEArd Biesheuvel2020-11-182-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 080b6f40763565f65ebb9540219c71ce885cf568 ] Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") introduced a __no_fgcse macro that expands to a function scope __attribute__((optimize("-fno-gcse"))), to disable a GCC specific optimization that was causing trouble on x86 builds, and was not expected to have any positive effect in the first place. However, as the GCC manual documents, __attribute__((optimize)) is not for production use, and results in all other optimization options to be forgotten for the function in question. This can cause all kinds of trouble, but in one particular reported case, it causes -fno-asynchronous-unwind-tables to be disregarded, resulting in .eh_frame info to be emitted for the function. This reverts commit 3193c0836, and instead, it disables the -fgcse optimization for the entire source file, but only when building for X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the original commit states that CONFIG_RETPOLINE=n triggers the issue, whereas CONFIG_RETPOLINE=y performs better without the optimization, so it is kept disabled in both cases. Fixes: 3193c0836f20 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
* KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIREDStephen Boyd2020-11-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1de111b51b829bcf01d2e57971f8fd07a665fa3f upstream. According to the SMCCC spec[1](7.5.2 Discovery) the ARM_SMCCC_ARCH_WORKAROUND_1 function id only returns 0, 1, and SMCCC_RET_NOT_SUPPORTED. 0 is "workaround required and safe to call this function" 1 is "workaround not required but safe to call this function" SMCCC_RET_NOT_SUPPORTED is "might be vulnerable or might not be, who knows, I give up!" SMCCC_RET_NOT_SUPPORTED might as well mean "workaround required, except calling this function may not work because it isn't implemented in some cases". Wonderful. We map this SMC call to 0 is SPECTRE_MITIGATED 1 is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE For KVM hypercalls (hvc), we've implemented this function id to return SMCCC_RET_NOT_SUPPORTED, 0, and SMCCC_RET_NOT_REQUIRED. One of those isn't supposed to be there. Per the code we call arm64_get_spectre_v2_state() to figure out what to return for this feature discovery call. 0 is SPECTRE_MITIGATED SMCCC_RET_NOT_REQUIRED is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE Let's clean this up so that KVM tells the guest this mapping: 0 is SPECTRE_MITIGATED 1 is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE Note: SMCCC_RET_NOT_AFFECTED is 1 but isn't part of the SMCCC spec Fixes: c118bbb52743 ("arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Steven Price <steven.price@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://developer.arm.com/documentation/den0028/latest [1] Link: https://lore.kernel.org/r/20201023154751.1973872-1-swboyd@chromium.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()Oleksij Rempel2020-11-181-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 286228d382ba6320f04fa2e7c6fc8d4d92e428f4 ] All user space generated SKBs are owned by a socket (unless injected into the key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned up. This leads to a problem when a CAN driver calls can_put_echo_skb() on a unshared SKB. If the socket is closed prior to the TX complete handler, can_get_echo_skb() and the subsequent delivering of the echo SKB to all registered callbacks, a SKB with a refcount of 0 is delivered. To avoid the problem, in can_get_echo_skb() the original SKB is now always cloned, regardless of shared SKB or not. If the process exists it can now safely discard its SKBs, without disturbing the delivery of the echo SKB. The problem shows up in the j1939 stack, when it clones the incoming skb, which detects the already 0 refcount. We can easily reproduce this with following example: testj1939 -B -r can0: & cansend can0 1823ff40#0123 WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174 refcount_t: addition on 0; use-after-free. Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010f570>] (dump_backtrace) from [<c010f90c>] (show_stack+0x20/0x24) [<c010f8ec>] (show_stack) from [<c0c3e1a4>] (dump_stack+0x8c/0xa0) [<c0c3e118>] (dump_stack) from [<c0127fec>] (__warn+0xe0/0x108) [<c0127f0c>] (__warn) from [<c01283c8>] (warn_slowpath_fmt+0xa8/0xcc) [<c0128324>] (warn_slowpath_fmt) from [<c0539c0c>] (refcount_warn_saturate+0x108/0x174) [<c0539b04>] (refcount_warn_saturate) from [<c0ad2cac>] (j1939_can_recv+0x20c/0x210) [<c0ad2aa0>] (j1939_can_recv) from [<c0ac9dc8>] (can_rcv_filter+0xb4/0x268) [<c0ac9d14>] (can_rcv_filter) from [<c0aca2cc>] (can_receive+0xb0/0xe4) [<c0aca21c>] (can_receive) from [<c0aca348>] (can_rcv+0x48/0x98) [<c0aca300>] (can_rcv) from [<c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88) [<c09b1f78>] (__netif_receive_skb_one_core) from [<c09b2070>] (__netif_receive_skb+0x38/0x94) [<c09b2038>] (__netif_receive_skb) from [<c09b2130>] (netif_receive_skb_internal+0x64/0xf8) [<c09b20cc>] (netif_receive_skb_internal) from [<c09b21f8>] (netif_receive_skb+0x34/0x19c) [<c09b21c4>] (netif_receive_skb) from [<c0791278>] (can_rx_offload_napi_poll+0x58/0xb4) Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: nf_tables: missing validation from the abort pathPablo Neira Ayuso2020-11-181-1/+8
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit c0391b6ab810381df632677a1dcbbbbd63d05b6d ] If userspace does not include the trailing end of batch message, then nfnetlink aborts the transaction. This allows to check that ruleset updates trigger no errors. After this patch, invoking this command from the prerouting chain: # nft -c add rule x y fib saddr . oif type local fails since oif is not supported there. This patch fixes the lack of rule validation from the abort/check path to catch configuration errors such as the one above. Fixes: a654de8fdc18 ("netfilter: nf_tables: fix chain dependency validation") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: use actual socket sk rather than skb sk when routing harderJason A. Donenfeld2020-11-182-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 46d6c5ae953cc0be38efd0e469284df7c4328cf8 ] If netfilter changes the packet mark when mangling, the packet is rerouted using the route_me_harder set of functions. Prior to this commit, there's one big difference between route_me_harder and the ordinary initial routing functions, described in the comment above __ip_queue_xmit(): /* Note: skb->sk can be different from sk, in case of tunnels */ int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, That function goes on to correctly make use of sk->sk_bound_dev_if, rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a tunnel will receive a packet in ndo_start_xmit with an initial skb->sk. It will make some transformations to that packet, and then it will send the encapsulated packet out of a *new* socket. That new socket will basically always have a different sk_bound_dev_if (otherwise there'd be a routing loop). So for the purposes of routing the encapsulated packet, the routing information as it pertains to the socket should come from that socket's sk, rather than the packet's original skb->sk. For that reason __ip_queue_xmit() and related functions all do the right thing. One might argue that all tunnels should just call skb_orphan(skb) before transmitting the encapsulated packet into the new socket. But tunnels do *not* do this -- and this is wisely avoided in skb_scrub_packet() too -- because features like TSQ rely on skb->destructor() being called when that buffer space is truely available again. Calling skb_orphan(skb) too early would result in buffers filling up unnecessarily and accounting info being all wrong. Instead, additional routing must take into account the new sk, just as __ip_queue_xmit() notes. So, this commit addresses the problem by fishing the correct sk out of state->sk -- it's already set properly in the call to nf_hook() in __ip_local_out(), which receives the sk as part of its normal functionality. So we make sure to plumb state->sk through the various route_me_harder functions, and then make correct use of it following the example of __ip_queue_xmit(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* PM: runtime: Drop pm_runtime_clean_up_links()Rafael J. Wysocki2020-11-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | commit d6e36668598154820177bfd78c1621d8e6c580a2 upstream. After commit d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") nothing prevents the consumer device's runtime PM from acquiring additional references to the supplier device after pm_runtime_clean_up_links() has run (or even while it is running), so calling this function from __device_release_driver() may be pointless (or even harmful). Moreover, it ignores stateless device links, so the runtime PM handling of managed and stateless device links is inconsistent because of it, so better get rid of it entirely. Fixes: d12544fb2aa9 ("PM: runtime: Remove link state checks in rpm_get/put_supplier()") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PM: runtime: Drop runtime PM references to supplier on link removalRafael J. Wysocki2020-11-101-2/+2
| | | | | | | | | | | | | | | | | commit e0e398e204634db8fb71bd89cf2f6e3e5bd09b51 upstream. While removing a device link, drop the supplier device's runtime PM usage counter as many times as needed to drop all of the runtime PM references to it from the consumer in addition to dropping the consumer's link count. Fixes: baa8809f6097 ("PM / runtime: Optimize the use of device links") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-18 21:25:48 +0000