summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hubKai-Heng Feng2018-11-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 781f0766cc41a9dd2e5d118ef4b1d5d89430257b upstream. Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mtd: nand: Fix nanddev_pos_next_page() kernel-doc headerBoris Brezillon2018-11-271-1/+1
| | | | | | | | | | | [ Upstream commit 98ee3fc7ef8395f8b7a379e6608aee91efc66d48 ] Function name is wrong in the kernel-doc header. Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ipset: Correct rcu_dereference() call in ip_set_put_comment()Jozsef Kadlecsik2018-11-271-2/+2
| | | | | | | | | | | [ Upstream commit 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 ] The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ipset: list:set: Decrease refcount synchronously on deletion and ↵Stefano Brivio2018-11-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | replace [ Upstream commit 439cd39ea136d2c026805264d58a91f36b6b64ca ] Commit 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") postponed decreasing set reference counters to the RCU callback. An 'ipset del' command can terminate before the RCU grace period is elapsed, and if sets are listed before then, the reference counter shown in userspace will be wrong: # ipset create h hash:ip; ipset create l list:set; ipset add l # ipset del l h; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 1 Number of entries: 0 Members: # sleep 1; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 0 Number of entries: 0 Members: Fix this by making the reference count update synchronous again. As a result, when sets are listed, ip_set_name_byindex() might now fetch a set whose reference count is already zero. Instead of relying on the reference count to protect against concurrent set renaming, grab ip_set_ref_lock as reader and copy the name, while holding the same lock in ip_set_rename() as writer instead. Reported-by: Li Shuang <shuali@redhat.com> Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Revert "netfilter: nft_numgen: add map lookups for numgen random operations"Pablo Neira Ayuso2018-11-271-2/+2
| | | | | | | | | | | | [ Upstream commit 4269fea768a11a447d8de620ce420f2214d4685c ] Laura found a better way to do this from userspace without requiring kernel infrastructure, revert this. Fixes: 978d8f9055c3 ("netfilter: nft_numgen: add map lookups for numgen random operations") Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: bridge: define INT_MIN & INT_MAX in userspaceJiri Slaby2018-11-271-0/+4
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5a8de47b3c250521dd632cdedaac6db88367defa ] With 4.19, programs like ebtables fail to build when they include "linux/netfilter_bridge.h". It is caused by commit 94276fa8a2a4 which added a use of INT_MIN and INT_MAX to the header: : In file included from /usr/include/linux/netfilter_bridge/ebtables.h:18, : from include/ebtables_u.h:28, : from communication.c:23: : /usr/include/linux/netfilter_bridge.h:30:20: error: 'INT_MIN' undeclared here (not in a function) : NF_BR_PRI_FIRST = INT_MIN, : ^~~~~~~ Define these constants by including "limits.h" when !__KERNEL__ (the same way as for other netfilter_* headers). Fixes: 94276fa8a2a4 ("netfilter: bridge: Expose nf_tables bridge hook priorities through uapi") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* sctp: fix strchange_flags name for Stream Change EventXin Long2018-11-231-0/+2
| | | | | | | | | | | | | | | | [ Upstream commit fd82d61ba142f0b83463e47064bf5460aac57b6e ] As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long2018-11-231-0/+1
| | | | | | | | | | | | | | | [ Upstream commit 12480e3b16982c4026de10dd8155823219cd6391 ] According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "sctp: remove sctp_transport_pmtu_check"Xin Long2018-11-231-0/+12
| | | | | | | | | | | | | | | [ Upstream commit 69fec325a64383667b8a35df5d48d6ce52fb2782 ] This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a. The dst's mtu in transport can be updated by a non sctp place like in xfrm where the MTU information didn't get synced between asoc, transport and dst, so it is still needed to do the pmtu check in sctp_packet_config. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* CONFIG_XEN_PV breaks xen_create_contiguous_region on ARMStefano Stabellini2018-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | commit f9005571701920551bcf54a500973fb61f2e1eda upstream. xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). [backport: remove change to xen_remap_pfn] Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by: Stefano Stabellini <stefanos@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uapi: fix linux/kfd_ioctl.h userspace compilation errorsDmitry V. Levin2018-11-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | commit aba118389a6fb2ad7958de0f37b5869852bd38cf upstream. Consistently use types provided by <linux/types.h> via <drm/drm.h> to fix the following linux/kfd_ioctl.h userspace compilation errors: /usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t' uint32_t reset_type; /usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t' uint32_t reset_cause; /usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t' uint32_t memory_lost; /usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t' uint32_t gpu_id; Fixes: 0c119abad7f0d ("drm/amd: Add kfd ioctl defines for hw_exception event") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clockevents/drivers/i8253: Add support for PIT shutdown quirkMichael Kelley2018-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 35b69a420bfb56b7b74cb635ea903db05e357bec upstream. Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org> Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org> Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org> Cc: "virtualization@lists.linux-foundation.org" <virtualization@lists.linux-foundation.org> Cc: "jgross@suse.com" <jgross@suse.com> Cc: "akataria@vmware.com" <akataria@vmware.com> Cc: "olaf@aepfle.de" <olaf@aepfle.de> Cc: "apw@canonical.com" <apw@canonical.com> Cc: vkuznets <vkuznets@redhat.com> Cc: "jasowang@redhat.com" <jasowang@redhat.com> Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com> Cc: KY Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* watchdog/core: Add missing prototypes for weak functionsMathieu Malaterre2018-11-211-0/+2
| | | | | | | | | | | | | | | | | | | | | commit 81bd415c91eb966118d773dddf254aebf3022411 upstream. The split out of the hard lockup detector exposed two new weak functions, but no prototypes for them, which triggers the build warning: kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes] kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes] Add the prototypes. Fixes: 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file") Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Babu Moger <babu.moger@oracle.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180606194232.17653-1-malat@debian.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mtd: nand: Fix nanddev_neraseblocks()Boris Brezillon2018-11-211-3/+2
| | | | | | | | | | | | | | commit d098093ba06eb032057d1aca1c2e45889e099d00 upstream. nanddev_neraseblocks() currently returns the number pages per LUN instead of the total number of eraseblocks. Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* libceph: bump CEPH_MSG_MAX_DATA_LENIlya Dryomov2018-11-211-1/+7
| | | | | | | | | | | | | | | | | commit 94e6992bb560be8bffb47f287194adf070b57695 upstream. If the read is large enough, we end up spinning in the messenger: libceph: osd0 192.168.122.1:6801 io error libceph: osd0 192.168.122.1:6801 io error libceph: osd0 192.168.122.1:6801 io error This is a receive side limit, so only reads were affected. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: hdmi.h: rename ADOBE_RGB to OPRGB and ADOBE_YCC to OPYCCHans Verkuil2018-11-131-2/+2
| | | | | | | | | | | | | | commit 463659a08d7999d5461fa45b35b17686189a70ca upstream. These names have been renamed in the CTA-861 standard due to trademark issues. Replace them here as well so they are in sync with the standard. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: replace ADOBERGB by OPRGBHans Verkuil2018-11-131-6/+17
| | | | | | | | | | | | | | | | | | | commit db0340182444612bcadb98bdec22f651aa42266c upstream. The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: cec: fix the Signal Free Time calculationHans Verkuil2018-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | commit 7d867a1b765e2b70815fec4964d7822a976ed349 upstream. The calculation of the Signal Free Time in the framework was not correct. If a message was received, then the next transmit should be considered a New Initiator and use a shorter SFT value. This was not done with the result that if both sides where continually sending messages, they both could use the same SFT value and one side could deny the other side access to the bus. Note that this fix does not take the corner case into account where a receive is in progress when you call adap_transmit. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: cec: add new tx/rx status bits to detect aborts/timeoutsHans Verkuil2018-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 7ec2b3b941a666a942859684281b5f6460a0c234 upstream. If the HDMI cable is disconnected or the CEC adapter is manually unconfigured, then all pending transmits and wait-for-replies are aborted. Signal this with new status bits (CEC_RX/TX_STATUS_ABORTED). If due to (usually) a driver bug a transmit never ends (i.e. the transmit_done was never called by the driver), then when this times out the message is marked with CEC_TX_STATUS_TIMEOUT. This should not happen and is an indication of a driver bug. Without a separate status bit for this it was impossible to detect this from userspace. The 'transmit timed out' kernel message is now a warning, so this should be more prominent in the kernel log as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* media: cec: make cec_get_edid_spa_location() an inline functionHans Verkuil2018-11-131-0/+70
| | | | | | | | | | | | | | | | | | | commit b915bf575d5b7774d0f22d57d6c143e07dcaade2 upstream. This function is needed by both V4L2 and CEC, so move this to cec.h as a static inline since there are no obvious shared modules between the two subsystems. This patch, together with the following ones, fixes a dependency bug: if CEC_CORE is disabled, then building adv7604 (and other HDMI receivers) will fail because an essential function is now stubbed out. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.17 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TC: Set DMA masks for devicesMaciej W. Rozycki2018-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream. Fix a TURBOchannel support regression with commit 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask") that caused coherent DMA allocations to produce a warning such as: defxx: v1.11 2014/07/01 Lawrence V. Stefani and others tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2 Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650 0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff 0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8 98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff 0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8 0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0 0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000 9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940 0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8 ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940 ... Call Trace: [<ffffffff8004dc78>] show_stack+0xa0/0x130 [<ffffffff80067940>] __warn+0x128/0x170 ---[ end trace b1d1e094f67f3bb2 ]--- This is because the TURBOchannel bus driver fails to set the coherent DMA mask for devices enumerated. Set the regular and coherent DMA masks for TURBOchannel devices then, observing that the bus protocol supports a 34-bit (16GiB) DMA address space, by interpreting the value presented in the address cycle across the 32 `ad' lines as a 32-bit word rather than byte address[1]. The architectural size of the TURBOchannel DMA address space exceeds the maximum amount of RAM any actual TURBOchannel system in existence may have, hence both masks are the same. This removes the warning shown above. References: [1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17 Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20835/ Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask") Cc: stable@vger.kernel.org # 4.16+ Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fsnotify: Fix busy inodes during unmountJan Kara2018-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 721fb6fbfd2132164c2e8777cc837f9b2c1794dc upstream. Detaching of mark connector from fsnotify_put_mark() can race with unmounting of the filesystem like: CPU1 CPU2 fsnotify_put_mark() spin_lock(&conn->lock); ... inode = fsnotify_detach_connector_from_object(conn) spin_unlock(&conn->lock); generic_shutdown_super() fsnotify_unmount_inodes() sees connector detached for inode -> nothing to do evict_inode() barfs on pending inode reference iput(inode); Resulting in "Busy inodes after unmount" message and possible kernel oops. Make fsnotify_unmount_inodes() properly wait for outstanding inode references from detached connectors. Note that the accounting of outstanding inode references in the superblock can cause some cacheline contention on the counter. OTOH it happens only during deletion of the last notification mark from an inode (or during unlinking of watched inode) and that is not too bad. I have measured time to create & delete inotify watch 100000 times from 64 processes in parallel (each process having its own inotify group and its own file on a shared superblock) on a 64 CPU machine. Average and standard deviation of 15 runs look like: Avg Stddev Vanilla 9.817400 0.276165 Fixed 9.710467 0.228294 So there's no statistically significant difference. Fixes: 6b3f05d24d35 ("fsnotify: Detach mark from object list when last reference is dropped") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* crypto: speck - remove SpeckJason A. Donenfeld2018-11-132-64/+2
| | | | | | | | | | | | | | | | | | | | commit 578bdaabd015b9b164842c3e8ace9802f38e7ecc upstream. These are unused, undesired, and have never actually been used by anybody. The original authors of this code have changed their mind about its inclusion. While originally proposed for disk encryption on low-end devices, the idea was discarded [1] in favor of something else before that could really get going. Therefore, this patch removes Speck. [1] https://marc.info/?l=linux-crypto-vger&m=153359499015659 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* signal: Guard against negative signal numbers in copy_siginfo_from_user32Eric W. Biederman2018-11-131-1/+1
| | | | | | | | | | | | | | | | | | | commit a36700589b85443e28170be59fa11c8a104130a5 upstream. While fixing an out of bounds array access in known_siginfo_layout reported by the kernel test robot it became apparent that the same bug exists in siginfo_layout and affects copy_siginfo_from_user32. The straight forward fix that makes guards against making this mistake in the future and should keep the code size small is to just take an unsigned signal number instead of a signed signal number, as I did to fix known_siginfo_layout. Cc: stable@vger.kernel.org Fixes: cc731525f26a ("signal: Remove kernel interal si_code magic") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* IB/rxe: Revise the ib_wr_opcode enumJason Gunthorpe2018-11-132-15/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9a59739bd01f77db6fbe2955a4fce165f0f43568 upstream. This enum has become part of the uABI, as both RXE and the ib_uverbs_post_send() command expect userspace to supply values from this enum. So it should be properly placed in include/uapi/rdma. In userspace this enum is called 'enum ibv_wr_opcode' as part of libibverbs.h. That enum defines different values for IB_WR_LOCAL_INV, IB_WR_SEND_WITH_INV, and IB_WR_LSO. These were introduced (incorrectly, it turns out) into libiberbs in 2015. The kernel has changed its mind on the numbering for several of the IB_WC values over the years, but has remained stable on IB_WR_LOCAL_INV and below. Based on this we can conclude that there is no real user space user of the values beyond IB_WR_ATOMIC_FETCH_AND_ADD, as they have never worked via rdma-core. This is confirmed by inspection, only rxe uses the kernel enum and implements the latter operations. rxe has clearly never worked with these attributes from userspace. Other drivers that support these opcodes implement the functionality without calling out to the kernel. To make IB_WR_SEND_WITH_INV and related work for RXE in userspace we choose to renumber the IB_WR enum in the kernel to match the uABI that userspace has bee using since before Soft RoCE was merged. This is an overall simpler configuration for the whole software stack, and obviously can't break anything existing. Reported-by: Seth Howell <seth.howell@intel.com> Tested-by: Seth Howell <seth.howell@intel.com> Fixes: 8700e3e7c485 ("Soft RoCE driver") Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* scsi: sched/wait: Add wait_event_lock_irq_timeout for TASK_UNINTERRUPTIBLE usageNicholas Bellinger2018-11-131-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 25ab0bc334b43bbbe4eabc255006ce42a9424da2 upstream. Short of reverting commit 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") for v4.19, target-core needs a wait_event_t macro can be executed using TASK_UNINTERRUPTIBLE to function correctly with existing fabric drivers that expect to run with signals pending during session shutdown and active se_cmd I/O quiesce. The most notable is iscsi-target/iser-target, while ibmvscsi_tgt invokes session shutdown logic from userspace via configfs attribute that could also potentially have signals pending. So go ahead and introduce wait_event_lock_irq_timeout() to achieve this, and update + rename __wait_event_lock_irq_timeout() to make it accept 'state' as a parameter. Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: <stable@vger.kernel.org> # v4.19+ Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* UAPI: ndctl: Fix g++-unsupported initialisation in headersDavid Howells2018-11-131-27/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9607871f37dc3e717639694b8d0dc738f2a68efc ] The following code in the linux/ndctl header file: static inline const char *nvdimm_bus_cmd_name(unsigned cmd) { static const char * const names[] = { [ND_CMD_ARS_CAP] = "ars_cap", [ND_CMD_ARS_START] = "ars_start", [ND_CMD_ARS_STATUS] = "ars_status", [ND_CMD_CLEAR_ERROR] = "clear_error", [ND_CMD_CALL] = "cmd_call", }; if (cmd < ARRAY_SIZE(names) && names[cmd]) return names[cmd]; return "unknown"; } is broken in a number of ways: (1) ARRAY_SIZE() is not generally defined. (2) g++ does not support "non-trivial" array initialisers fully yet. (3) Every file that calls this function will acquire a copy of names[]. The same goes for nvdimm_cmd_name(). Fix all three by converting to a switch statement where each case returns a string. That way if cmd is a constant, the compiler can trivially reduce it and, if not, the compiler can use a shared lookup table if it thinks that is more efficient. A better way would be to remove these functions and their arrays from the header entirely. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* signal: Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstackWill Deacon2018-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 22839869f21ab3850fbbac9b425ccc4c0023926f ] The sigaltstack(2) system call fails with -ENOMEM if the new alternative signal stack is found to be smaller than SIGMINSTKSZ. On architectures such as arm64, where the native value for SIGMINSTKSZ is larger than the compat value, this can result in an unexpected error being reported to a compat task. See, for example: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385 This patch fixes the problem by extending do_sigaltstack to take the minimum signal stack size as an additional parameter, allowing the native and compat system call entry code to pass in their respective values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not been defined by the architecture. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Steve McIntyre <steve.mcintyre@arm.com> Tested-by: Steve McIntyre <93sam@debian.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvme: call nvme_complete_rq when nvmf_check_ready fails for mpath I/OJames Smart2018-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 783f4a4408e1251d17f333ad56abac24dde988b9 ] When an io is rejected by nvmf_check_ready() due to validation of the controller state, the nvmf_fail_nonready_command() will normally return BLK_STS_RESOURCE to requeue and retry. However, if the controller is dying or the I/O is marked for NVMe multipath, the I/O is failed so that the controller can terminate or so that the io can be issued on a different path. Unfortunately, as this reject point is before the transport has accepted the command, blk-mq ends up completing the I/O and never calls nvme_complete_rq(), which is where multipath may preserve or re-route the I/O. The end result is, the device user ends up seeing an EIO error. Example: single path connectivity, controller is under load, and a reset is induced. An I/O is received: a) while the reset state has been set but the queues have yet to be stopped; or b) after queues are started (at end of reset) but before the reconnect has completed. The I/O finishes with an EIO status. This patch makes the following changes: - Adds the HOST_PATH_ERROR pathing status from TP4028 - Modifies the reject point such that it appears to queue successfully, but actually completes the io with the new pathing status and calls nvme_complete_rq(). - nvme_complete_rq() recognizes the new status, avoids resetting the controller (likely was already done in order to get this new status), and calls the multipather to clear the current path that errored. This allows the next command (retry or new command) to select a new path if there is one. Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bpf: fix partial copy of map_ptr when dst is scalarDaniel Borkmann2018-11-131-0/+3
| | | | | | | | | | | | | | | | | | | | commit 0962590e553331db2cc0aef2dc35c57f6300dbbe upstream. ALU operations on pointers such as scalar_reg += map_value_ptr are handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr and range in the register state share a union, so transferring state through dst_reg->range = ptr_reg->range is just buggy as any new map_ptr in the dst_reg is then truncated (or null) for subsequent checks. Fix this by adding a raw member and use it for copying state over to dst_reg. Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Edward Cree <ecree@solarflare.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* Revert "net: simplify sock_poll_wait"Karsten Graul2018-11-041-3/+9
| | | | | | | | | | | | | | | | | | [ Upstream commit 89ab066d4229acd32e323f1569833302544a4186 ] This reverts commit dd979b4df817e9976f18fb6f9d134d6bc4a3c317. This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an internal TCP socket for the initial handshake with the remote peer. Whenever the SMC connection can not be established this TCP socket is used as a fallback. All socket operations on the SMC socket are then forwarded to the TCP socket. In case of poll, the file->private_data pointer references the SMC socket because the TCP socket has no file assigned. This causes tcp_poll to wait on the wrong socket. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman2018-10-201-0/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Dave writes: "drm fixes for 4.19 final (part 2) Looked like two stragglers snuck in, one very urgent the pageflipping was missing a reference that could result in a GPF on non-i915 drivers, the other is an overflow in the sun4i dotclock calcs resulting in a mode not getting set." * tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm: drm/sun4i: Fix an ulong overflow in the dotclock driver drm: Get ref on CRTC commit object when waiting for flip_done
| * Merge tag 'drm-misc-fixes-2018-10-19' of ↵Dave Airlie2018-10-201-0/+11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Second pull request for v4.19: - Fix ulong overflow in sun4i - Fix a serious GPF in waiting for flip_done from commit_tail(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/97d1ed42-1d99-fcc5-291e-cd1dc29a4252@linux.intel.com
| | * drm: Get ref on CRTC commit object when waiting for flip_doneLeo Li2018-10-181-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a general protection fault, caused by accessing the contents of a flip_done completion object that has already been freed. It occurs due to the preemption of a non-blocking commit worker thread W by another commit thread X. X continues to clear its atomic state at the end, destroying the CRTC commit object that W still needs. Switching back to W and accessing the commit objects then leads to bad results. Worker W becomes preemptable when waiting for flip_done to complete. At this point, a frequently occurring commit thread X can take over. Here's an example where W is a worker thread that flips on both CRTCs, and X does a legacy cursor update on both CRTCs: ... 1. W does flip work 2. W runs commit_hw_done() 3. W waits for flip_done on CRTC 1 4. > flip_done for CRTC 1 completes 5. W finishes waiting for CRTC 1 6. W waits for flip_done on CRTC 2 7. > Preempted by X 8. > flip_done for CRTC 2 completes 9. X atomic_check: hw_done and flip_done are complete on all CRTCs 10. X updates cursor on both CRTCs 11. X destroys atomic state 12. X done 13. > Switch back to W 14. W waits for flip_done on CRTC 2 15. W raises general protection fault The error looks like so: general protection fault: 0000 [#1] PREEMPT SMP PTI **snip** Call Trace: lock_acquire+0xa2/0x1b0 _raw_spin_lock_irq+0x39/0x70 wait_for_completion_timeout+0x31/0x130 drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper] amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu] commit_tail+0x3d/0x70 [drm_kms_helper] process_one_work+0x212/0x650 worker_thread+0x49/0x420 kthread+0xfb/0x130 ret_from_fork+0x3a/0x50 Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O) gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm(O) drm(O) Note that i915 has this issue masked, since hw_done is signaled after waiting for flip_done. Doing so will block the cursor update from happening until hw_done is signaled, preventing the cursor commit from destroying the state. v2: The reference on the commit object needs to be obtained before hw_done() is signaled, since that's the point where another commit is allowed to modify the state. Assuming that the new_crtc_state->commit object still exists within flip_done() is incorrect. Fix by getting a reference in setup_commit(), and releasing it during default_clear(). Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman2018-10-196-1/+26
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | David writes: "Networking 1) Fix gro_cells leak in xfrm layer, from Li RongQing. 2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that. From Eric Dumazet. 3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn Töpel. 4) Out of bounds packet access in _decode_session6(), from Alexei Starovoitov. 5) Several ethtool bugs, where we copy a struct into the kernel twice and our validations of the values in the first copy can be invalidated by the second copy due to asynchronous updates to the memory by the user. From Wenwen Wang. 6) Missing netlink attribute validation in cls_api, from Davide Caratti. 7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang. 8) rxrpc operates on wrong kvec, from Yue Haibing. 9) A regression was introduced by the disassosciation of route neighbour references in rt6_probe(), causing probe for neighbourless routes to not be properly rate limited. Fix from Sabrina Dubroca. 10) Unsafe RCU locking in tipc, from Tung Nguyen. 11) Use after free in inet6_mc_check(), from Eric Dumazet. 12) PMTU from icmp packets should update the SCTP transport pathmtu, from Xin Long. 13) Missing peer put on error in rxrpc, from David Howells. 14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren. 15) Fix overflowing shift statement in qla3xxx driver, from Nathan Chancellor. 16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva. 17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return value in an inverted manner, fix from Paolo Abeni. 18) Fix missed unresolved entries in ipmr dumps, from Nikolay Aleksandrov. 19) Fix NAPI handling under high load, we can completely miss events when NAPI has to loop more than one time in a cycle. From Heiner Kallweit." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits) ip6_tunnel: Fix encapsulation layout tipc: fix info leak from kernel tipc_event net: socket: fix a missing-check bug net: sched: Fix for duplicate class dump r8169: fix NAPI handling under high load net: ipmr: fix unresolved entry dumps net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion() sctp: fix the data size calculation in sctp_data_size virtio_net: avoid using netif_tx_disable() for serializing tx routine udp6: fix encap return code for resubmitting mlxsw: core: Fix use-after-free when flashing firmware during init sctp: not free the new asoc when sctp_wait_for_connect returns err sctp: fix race on sctp_id2asoc r8169: re-enable MSI-X on RTL8168g net: bpfilter: use get_pid_task instead of pid_task ptp: fix Spectre v1 vulnerability net: qla3xxx: Remove overflowing shift statement geneve, vxlan: Don't set exceptions if skb->len < mtu geneve, vxlan: Don't check skb_dst() twice sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead ...
| * | | sctp: fix the data size calculation in sctp_data_sizeXin Long2018-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sctp data size should be calculated by subtracting data chunk header's length from chunk_hdr->length, not just data header. Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | geneve, vxlan: Don't set exceptions if skb->len < mtuStefano Brivio2018-10-171-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We shouldn't abuse exceptions: if the destination MTU is already higher than what we're transmitting, no exception should be created. Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL insteadXin Long2018-10-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to rfc7496 section 4.3 or 4.4: sprstat_policy: This parameter indicates for which PR-SCTP policy the user wants the information. It is an error to use SCTP_PR_SCTP_NONE in sprstat_policy. If SCTP_PR_SCTP_ALL is used, the counters provided are aggregated over all supported policies. We change to dump pr_assoc and pr_stream all status by SCTP_PR_SCTP_ALL instead, and return error for SCTP_PR_SCTP_NONE, as it also said "It is an error to use SCTP_PR_SCTP_NONE in sprstat_policy. " Fixes: 826d253d57b1 ("sctp: add SCTP_PR_ASSOC_STATUS on sctp sockopt") Fixes: d229d48d183f ("sctp: add SCTP_PR_STREAM_STATUS sockopt for prsctp") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sctp: use the pmtu from the icmp packet to update transport pathmtuXin Long2018-10-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Other than asoc pmtu sync from all transports, sctp_assoc_sync_pmtu is also processing transport pmtu_pending by icmp packets. But it's meaningless to use sctp_dst_mtu(t->dst) as new pmtu for a transport. The right pmtu value should come from the icmp packet, and it would be saved into transport->mtu_info in this patch and used later when the pmtu sync happens in sctp_sendmsg_to_asoc or sctp_packet_config. Besides, without this patch, as pmtu can only be updated correctly when receiving a icmp packet and no place is holding sock lock, it will take long time if the sock is busy with sending packets. Note that it doesn't process transport->mtu_info in .release_cb(), as there is no enough information for pmtu update, like for which asoc or transport. It is not worth traversing all asocs to check pmtu_pending. So unlike tcp, sctp does this in tx path, for which mtu_info needs to be atomic_t. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | ipv6: rate-limit probes for neighbourless routesSabrina Dubroca2018-10-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When commit 270972554c91 ("[IPV6]: ROUTE: Add Router Reachability Probing (RFC4191).") introduced router probing, the rt6_probe() function required that a neighbour entry existed. This neighbour entry is used to record the timestamp of the last probe via the ->updated field. Later, commit 2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().") removed the requirement for a neighbour entry. Neighbourless routes skip the interval check and are not rate-limited. This patch adds rate-limiting for neighbourless routes, by recording the timestamp of the last probe in the fib6_info itself. Fixes: 2152caea7196 ("ipv6: Do not depend on rt->n in rt6_probe().") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge tag 'mlx5-fixes-2018-10-10' of ↵David S. Miller2018-10-151-0/+8
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-10-10 This pull request includes some fixes to mlx5 driver, Please pull and let me know if there's any problem. For -stable v4.11: ('net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault type') For -stable v4.17: ('net/mlx5: Fix memory leak when setting fpga ipsec caps') For -stable v4.18: ('net/mlx5: WQ, fixes for fragmented WQ buffers API') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | net/mlx5: WQ, fixes for fragmented WQ buffers APITariq Toukan2018-10-101-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx5e netdevice used to calculate fragment edges by a call to mlx5_wq_cyc_get_frag_size(). This calculation did not give the correct indication for queues smaller than a PAGE_SIZE, (broken by default on PowerPC, where PAGE_SIZE == 64KB). Here it is replaced by the correct new calls/API. Since (TX/RX) Work Queues buffers are fragmented, here we introduce changes to the API in core driver, so that it gets a stride index and returns the index of last stride on same fragment, and an additional wrapping function that returns the number of physically contiguous strides that can be written contiguously to the work queue. This obsoletes the following API functions, and their buggy usage in EN driver: * mlx5_wq_cyc_get_frag_size() * mlx5_wq_cyc_ctr2fragix() The new API improves modularity and hides the details of such calculation for mlx5e netdevice and mlx5_ib rdma drivers. New calculation is also more efficient, and improves performance as follows: Packet rate test: pktgen, UDP / IPv4, 64byte, single ring, 8K ring size. Before: 16,477,619 pps After: 17,085,793 pps 3.7% improvement Fixes: 3a2f70331226 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* | | | | Merge tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman2018-10-191-3/+3
|\ \ \ \ \ | | |_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dave writes: "drm fixes for 4.19 final Just a last set of misc core fixes for final. 4 fixes, one use after free, one fb integration fix, one EDID fix, and one laptop panel quirk," * tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm: drm/edid: VSDB yCBCr420 Deep Color mode bit definitions drm: fix use of freed memory in drm_mode_setcrtc drm: fb-helper: Reject all pixel format changing requests drm/edid: Add 6 bpc quirk for BOE panel in HP Pavilion 15-n233sl
| * | | | Merge tag 'drm-misc-fixes-2018-10-18' of ↵Dave Airlie2018-10-191-3/+3
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v4.19: - Fix use of freed memory in drm_mode_setcrtc. - Reject pixel format changing requests in fb helper. - Add 6 bpc quirk for HP Pavilion 15-n233sl - Fix VSDB yCBCr420 Deep Color mode bit definitions Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/647fe5d0-4ec5-57cc-9f23-a4836b29e278@linux.intel.com
| | * | | drm/edid: VSDB yCBCr420 Deep Color mode bit definitionsClint Taylor2018-10-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct definitions in the header for the mask to work correctly. Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893 Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
* | | | | mremap: properly flush TLB before releasing the pageLinus Torvalds2018-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jann Horn points out that our TLB flushing was subtly wrong for the mremap() case. What makes mremap() special is that we don't follow the usual "add page to list of pages to be freed, then flush tlb, and then free pages". No, mremap() obviously just _moves_ the page from one page table location to another. That matters, because mremap() thus doesn't directly control the lifetime of the moved page with a freelist: instead, the lifetime of the page is controlled by the page table locking, that serializes access to the entry. As a result, we need to flush the TLB not just before releasing the lock for the source location (to avoid any concurrent accesses to the entry), but also before we release the destination page table lock (to avoid the TLB being flushed after somebody else has already done something to that page). This also makes the whole "need_flush" logic unnecessary, since we now always end up flushing the TLB for every valid entry. Reported-and-tested-by: Jann Horn <jannh@google.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'trace-v4.19-rc8' of ↵Greg Kroah-Hartman2018-10-183-14/+31
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Steven writes: "tracing: Two fixes for 4.19 This fixes two bugs: - Fix size mismatch of tracepoint array - Have preemptirq test module use same clock source of the selftest" * tag 'trace-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use trace_clock_local() for looping in preemptirq_delay_test.c tracepoint: Fix tracepoint array element size mismatch
| * | | | tracepoint: Fix tracepoint array element size mismatchMathieu Desnoyers2018-10-173-14/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 46e0c9be206f ("kernel: tracepoints: add support for relative references") changes the layout of the __tracepoint_ptrs section on architectures supporting relative references. However, it does so without turning struct tracepoint * const into const int elsewhere in the tracepoint code, which has the following side-effect: Setting mod->num_tracepoints is done in by module.c: mod->tracepoints_ptrs = section_objs(info, "__tracepoints_ptrs", sizeof(*mod->tracepoints_ptrs), &mod->num_tracepoints); Basically, since sizeof(*mod->tracepoints_ptrs) is a pointer size (rather than sizeof(int)), num_tracepoints is erroneously set to half the size it should be on 64-bit arch. So a module with an odd number of tracepoints misses the last tracepoint due to effect of integer division. So in the module going notifier: for_each_tracepoint_range(mod->tracepoints_ptrs, mod->tracepoints_ptrs + mod->num_tracepoints, tp_module_going_check_quiescent, NULL); the expression (mod->tracepoints_ptrs + mod->num_tracepoints) actually evaluates to something within the bounds of the array, but miss the last tracepoint if the number of tracepoints is odd on 64-bit arch. Fix this by introducing a new typedef: tracepoint_ptr_t, which is either "const int" on architectures that have PREL32 relocations, or "struct tracepoint * const" on architectures that does not have this feature. Also provide a new tracepoint_ptr_defer() static inline to encapsulate deferencing this type rather than duplicate code and ugly idefs within the for_each_tracepoint_range() implementation. This issue appears in 4.19-rc kernels, and should ideally be fixed before the end of the rc cycle. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jessica Yu <jeyu@kernel.org> Link: http://lkml.kernel.org/r/20181013191050.22389-1-mathieu.desnoyers@efficios.com Link: http://lkml.kernel.org/r/20180704083651.24360-7-ard.biesheuvel@linaro.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
* | | | | Merge tag 'arm64-fixes' of ↵Greg Kroah-Hartman2018-10-131-0/+1
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Will writes: "More arm64 fixes - Reject CHAIN PMU events when they are not part of a 64-bit counter - Fix WARN_ON_ONCE() that triggers for reserved regions that don't correspond to mapped memory" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: Reject stand-alone CHAIN events for PMUv3 arm64: Fix /proc/iomem for reserved but not memory regions
| * | | | arm64: perf: Reject stand-alone CHAIN events for PMUv3Will Deacon2018-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It doesn't make sense for a perf event to be configured as a CHAIN event in isolation, so extend the arm_pmu structure with a ->filter_match() function to allow the backend PMU implementation to reject CHAIN events early. Cc: <stable@vger.kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:19:30 +0000