summaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* blk-mq: use sbq wait queues instead of restart for driver tagsOmar Sandoval2017-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Commit 50e1dab86aa2 ("blk-mq-sched: fix starvation for multiple hardware queues and shared tags") fixed one starvation issue for shared tags. However, we can still get into a situation where we fail to allocate a tag because all tags are allocated but we don't have any pending requests on any hardware queue. One solution for this would be to restart all queues that share a tag map, but that really sucks. Ideally, we could just block and wait for a tag, but that isn't always possible from blk_mq_dispatch_rq_list(). However, we can still use the struct sbitmap_queue wait queues with a custom callback instead of blocking. This has a few benefits: 1. It avoids iterating over all hardware queues when completing an I/O, which the current restart code has to do. 2. It benefits from the existing rolling wakeup code. 3. It avoids punting to another thread just to have it block. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/sed-opal: Introduce free_opal_dev to free the structure and clean up stateScott Bauer2017-02-231-0/+5
| | | | | | | | | Before we free the opal structure we need to clean up any saved locking ranges that the user had told us to unlock from a suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* nvme-rdma: move nvme cm status helper to .h fileMax Gurtovoy2017-02-221-0/+24
| | | | | | | | | | | This will enable the usage for nvme rdma target. Also move from a lookup array to a switch statement. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* nvme: Enable autonomous power state transitionsAndy Lutomirski2017-02-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NVMe devices can advertise multiple power states. These states can be either "operational" (the device is fully functional but possibly slow) or "non-operational" (the device is asleep until woken up). Some devices can automatically enter a non-operational state when idle for a specified amount of time and then automatically wake back up when needed. The hardware configuration is a table. For each state, an entry in the table indicates the next deeper non-operational state, if any, to autonomously transition to and the idle time required before transitioning. This patch teaches the driver to program APST so that each successive non-operational state will be entered after an idle time equal to 100% of the total latency (entry plus exit) associated with that state. The maximum acceptable latency is controlled using dev_pm_qos (e.g. power/pm_qos_latency_tolerance_us in sysfs); non-operational states with total latency greater than this value will not be used. As a special case, setting the latency tolerance to 0 will disable APST entirely. On hardware without APST support, the sysfs file will not be exposed. The latency tolerance for newly-probed devices is set by the module parameter nvme_core.default_ps_max_latency_us. In theory, the device can expose "default" APST table, but this doesn't seem to function correctly on my device (Samsung 950), nor does it seem particularly useful. There is also an optional mechanism by which a configuration can be "saved" so it will be automatically loaded on reset. This can be configured from userspace, but it doesn't seem useful to support in the driver. On my laptop, enabling APST seems to save nearly 1W. The hardware tables can be decoded in userspace with nvme-cli. 'nvme id-ctrl /dev/nvmeN' will show the power state table and 'nvme get-feature -f 0x0c -H /dev/nvme0' will show the current APST configuration. This feature is quirked off on a known-buggy Samsung device. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* nvme: Use CNS as 8-bit field and avoid endianness conversionParav Pandit2017-02-221-1/+3
| | | | | | | | | | | | | This patch defines CNS field as 8-bit field and avoids cpu_to/from_le conversions. Also initialize nvme_command cns value explicitly to NVME_ID_CNS_NS for readability (don't rely on the fact that NVME_ID_CNS_NS = 0). Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-blockLinus Torvalds2017-02-2125-223/+610
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer updates from Jens Axboe: - blk-mq scheduling framework from me and Omar, with a port of the deadline scheduler for this framework. A port of BFQ from Paolo is in the works, and should be ready for 4.12. - Various fixups and improvements to the above scheduling framework from Omar, Paolo, Bart, me, others. - Cleanup of the exported sysfs blk-mq data into debugfs, from Omar. This allows us to export more information that helps debug hangs or performance issues, without cluttering or abusing the sysfs API. - Fixes for the sbitmap code, the scalable bitmap code that was migrated from blk-mq, from Omar. - Removal of the BLOCK_PC support in struct request, and refactoring of carrying SCSI payloads in the block layer. This cleans up the code nicely, and enables us to kill the SCSI specific parts of struct request, shrinking it down nicely. From Christoph mainly, with help from Hannes. - Support for ranged discard requests and discard merging, also from Christoph. - Support for OPAL in the block layer, and for NVMe as well. Mainly from Scott Bauer, with fixes/updates from various others folks. - Error code fixup for gdrom from Christophe. - cciss pci irq allocation cleanup from Christoph. - Making the cdrom device operations read only, from Kees Cook. - Fixes for duplicate bdi registrations and bdi/queue life time problems from Jan and Dan. - Set of fixes and updates for lightnvm, from Matias and Javier. - A few fixes for nbd from Josef, using idr to name devices and a workqueue deadlock fix on receive. Also marks Josef as the current maintainer of nbd. - Fix from Josef, overwriting queue settings when the number of hardware queues is updated for a blk-mq device. - NVMe fix from Keith, ensuring that we don't repeatedly mark and IO aborted, if we didn't end up aborting it. - SG gap merging fix from Ming Lei for block. - Loop fix also from Ming, fixing a race and crash between setting loop status and IO. - Two block race fixes from Tahsin, fixing request list iteration and fixing a race between device registration and udev device add notifiations. - Double free fix from cgroup writeback, from Tejun. - Another double free fix in blkcg, from Hou Tao. - Partition overflow fix for EFI from Alden Tondettar. * tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits) nvme: Check for Security send/recv support before issuing commands. block/sed-opal: allocate struct opal_dev dynamically block/sed-opal: tone down not supported warnings block: don't defer flushes on blk-mq + scheduling blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers blk-mq: don't special case flush inserts for blk-mq-sched blk-mq-sched: don't add flushes to the head of requeue queue blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not block: do not allow updates through sysfs until registration completes lightnvm: set default lun range when no luns are specified lightnvm: fix off-by-one error on target initialization Maintainers: Modify SED list from nvme to block Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN uapi: sed-opal fix IOW for activate lsp to use correct struct cdrom: Make device operations read-only elevator: fix loading wrong elevator type for blk-mq devices cciss: switch to pci_irq_alloc_vectors block/loop: fix race between I/O and set_status blk-mq-sched: don't hold queue_lock when calling exit_icq block: set make_request_fn manually in blk_mq_update_nr_hw_queues ...
| * Merge branch 'for-4.11/next' into for-4.11/linus-mergeJens Axboe2017-02-1718-100/+220
| |\ | | | | | | | | | Signed-off-by: Jens Axboe <axboe@fb.com>
| | * blk-mq: pass bio to blk_mq_sched_get_rq_privPaolo Valente2017-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bio is used in bfq-mq's get_rq_priv, to get the request group. We could pass directly the group here, but I thought that passing the bio was more general, giving the possibility to get other pieces of information if needed. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * nvme: support ranged discard requestsChristoph Hellwig2017-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | NVMe supports up to 256 ranges per DSM command, so wire up support for ranged discards up to that limit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: optionally merge discontiguous discard bios into a single requestChristoph Hellwig2017-02-082-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new merge strategy that merges discard bios into a request until the maximum number of discard ranges (or the maximum discard size) is reached from the plug merging code. I/O scheduler merging is not wired up yet but might also be useful, although not for fast devices like NVMe which are the only user for now. Note that for now we don't support limiting the size of each discard range, but if needed that can be added later. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: enumify ELEVATOR_*_MERGEChristoph Hellwig2017-02-081-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | Switch these constants to an enum, and make let the compiler ensure that all callers of blk_try_merge and elv_merge handle all potential values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * blktrace: make do_blk_trace_setup() staticOmar Sandoval2017-02-021-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | This isn't used outside of blktrace.c anymore. Fixes: 62c2a7d969f3 ("block: push BKL into blktrace ioctls") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: fix debugfs config conditional in struct request_queueOmar Sandoval2017-02-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The debugfs dentries are only used for CONFIG_BLK_DEBUG_FS, so make them conditional on that instead of CONFIG_DEBUG_FS. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * debugfs: add debugfs_lookup()Omar Sandoval2017-02-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't always have easy access to the dentry of a file or directory we created in debugfs. Add a helper which allows us to get a dentry we previously created. The motivation for this change is a problem with blktrace and the blk-mq debugfs entries introduced in 07e4fead45e6 ("blk-mq: create debugfs directory tree"). Namely, in some cases, the directory that blktrace needs to create may already exist, but in other cases, it may not. We _could_ rely on a bunch of implied knowledge to decide whether to create the directory or not, but it's much cleaner on our end to just look it up. Signed-off-by: Omar Sandoval <osandov@fb.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * scsi, block: fix duplicate bdi name registration crashesDan Williams2017-02-022-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warnings of the following form occur because scsi reuses a devt number while the block layer still has it referenced as the name of the bdi [1]: WARNING: CPU: 1 PID: 93 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/devices/virtual/bdi/8:192' [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 ? kernfs_path_from_node+0x4f/0x60 sysfs_warn_dup+0x62/0x80 sysfs_create_dir_ns+0x77/0x90 kobject_add_internal+0xb2/0x350 kobject_add+0x75/0xd0 device_add+0x15a/0x650 device_create_groups_vargs+0xe0/0xf0 device_create_vargs+0x1c/0x20 bdi_register+0x90/0x240 ? lockdep_init_map+0x57/0x200 bdi_register_owner+0x36/0x60 device_add_disk+0x1bb/0x4e0 ? __pm_runtime_use_autosuspend+0x5c/0x70 sd_probe_async+0x10d/0x1c0 async_run_entry_fn+0x39/0x170 This is a brute-force fix to pass the devt release information from sd_probe() to the locations where we register the bdi, device_add_disk(), and unregister the bdi, blk_cleanup_queue(). Thanks to Omar for the quick reproducer script [2]. This patch survives where an unmodified kernel fails in a few seconds. [1]: https://marc.info/?l=linux-scsi&m=147116857810716&w=4 [2]: http://marc.info/?l=linux-block&m=148554717109098&w=2 Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jan Kara <jack@suse.cz> Reported-by: Omar Sandoval <osandov@osandov.com> Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: Get rid of blk_get_backing_dev_info()Jan Kara2017-02-022-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | blk_get_backing_dev_info() is now a simple dereference. Remove that function and simplify some code around that. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: Make blk_get_backing_dev_info() safe without open bdevJan Kara2017-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currenly blk_get_backing_dev_info() is not safe to be called when the block device is not open as bdev->bd_disk is NULL in that case. However inode_to_bdi() uses this function and may be call called from flusher worker or other writeback related functions without bdev being open which leads to crashes such as: [113031.075540] Unable to handle kernel paging request for data at address 0x00000000 [113031.075614] Faulting instruction address: 0xc0000000003692e0 0:mon> t [c0000000fb65f900] c00000000036cb6c writeback_sb_inodes+0x30c/0x590 [c0000000fb65fa10] c00000000036ced4 __writeback_inodes_wb+0xe4/0x150 [c0000000fb65fa70] c00000000036d33c wb_writeback+0x30c/0x450 [c0000000fb65fb40] c00000000036e198 wb_workfn+0x268/0x580 [c0000000fb65fc50] c0000000000f3470 process_one_work+0x1e0/0x590 [c0000000fb65fce0] c0000000000f38c8 worker_thread+0xa8/0x660 [c0000000fb65fd80] c0000000000fc4b0 kthread+0x110/0x130 [c0000000fb65fe30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: Dynamically allocate and refcount backing_dev_infoJan Kara2017-02-023-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of storing backing_dev_info inside struct request_queue, allocate it dynamically, reference count it, and free it when the last reference is dropped. Currently only request_queue holds the reference but in the following patch we add other users referencing backing_dev_info. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: Use pointer to backing_dev_info from request_queueJan Kara2017-02-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: Unhash block device inodes on gendisk destructionJan Kara2017-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, block device inodes stay around after corresponding gendisk hash died until memory reclaim finds them and frees them. Since we will make block device inode pin the bdi, we want to free the block device inode as soon as the device goes away so that bdi does not stay around unnecessarily. Furthermore we need to avoid issues when new device with the same major,minor pair gets created since reusing the bdi structure would be rather difficult in this case. Unhashing block device inode on gendisk destruction nicely deals with these problems. Once last block device inode reference is dropped (which may be directly in del_gendisk()), the inode gets evicted. Furthermore if the major,minor pair gets reallocated, we are guaranteed to get new block device inode even if old block device inode is not yet evicted and thus we avoid issues with possible reuse of bdi. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: move internal_tag to same cache line as tagJens Axboe2017-01-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we removed cmd_type, we now have a hole in the struct. Move the internal_tag member to the same cacheline as tag, since we use them at the same time. This doesn't fix the hole, just moves it elsewhere. Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig2017-01-313-20/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * ide: don't abuse cmd_typeChristoph Hellwig2017-01-311-11/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the legacy ide driver defines several request types of it's own, which is in the way of removing that field entirely. Instead add a type field to struct ide_request and use that to distinguish the different types of IDE-internal requests. It's a bit of a mess, but so is the surrounding code.. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: introduce blk_rq_is_passthroughChristoph Hellwig2017-01-313-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: split scsi_request out of struct requestChristoph Hellwig2017-01-274-14/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block/bsg: move queue creation into bsg_setup_queueChristoph Hellwig2017-01-271-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | Simply the boilerplate code needed for bsg nodes a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * scsi: allocate scsi_cmnd structures as part of struct requestChristoph Hellwig2017-01-271-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rely on the new block layer functionality to allocate additional driver specific data behind struct request instead of implementing it in SCSI itѕelf. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * scsi: remove __scsi_alloc_queueChristoph Hellwig2017-01-272-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead do an internal export of __scsi_init_queue for the transport classes that export BSG nodes. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * dm: always defer request allocation to the owner of the request_queueChristoph Hellwig2017-01-271-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DM already calls blk_mq_alloc_request on the request_queue of the underlying device if it is a blk-mq device. But now that we allow drivers to allocate additional data and initialize it ahead of time we need to do the same for all drivers. Doing so and using the new cmd_size infrastructure in the block layer greatly simplifies the dm-rq and mpath code, and should also make arbitrary combinations of SQ and MQ devices with SQ or MQ device mapper tables easily possible as a further step. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: cleanup tracingChristoph Hellwig2017-01-272-23/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A couple tweaks to the tracing code: - trace the request size for all requests - trace request sector and nr_sectors only for fs requests, enforced by helpers - drop SCSI CDB tracing - we have SCSI tracing for this and are going to me the CDB out of the generic struct request soon. With this the tracing code stops to know about BLOCK_PC requests entirely, it's just FS vs passthrough requests now, where the latter includes any driver-private requests. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: allow specifying size for extra command dataChristoph Hellwig2017-01-271-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This mirrors the blk-mq capabilities to allocate extra drivers-specific data behind struct request by setting a cmd_size field, as well as having a constructor / destructor for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * block: simplify blk_init_allocated_queueChristoph Hellwig2017-01-271-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return an errno value instead of the passed in queue so that the callers don't have to keep track of two queues, and move the assignment of the request_fn and lock to the caller as passing them as argument doesn't simplify anything. While we're at it also remove two pointless NULL assignments, given that the request structure is zeroed on allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * Merge branch 'for-4.11/block' into for-4.11/rq-refactorJens Axboe2017-01-275-12/+128
| | |\ | | | | | | | | | | | | Signed-off-by: Jens Axboe <axboe@fb.com>
| * | \ Merge branch 'for-4.11/block' into for-4.11/linus-mergeJens Axboe2017-02-1711-128/+395
| |\ \ \ | | | | | | | | | | | | | | | Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | nvme: Check for Security send/recv support before issuing commands.Scott Bauer2017-02-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to verify that the controller supports the security commands before actually trying to issue them. Signed-off-by: Scott Bauer <scott.bauer@intel.com> [hch: moved the check so that we don't call into the OPAL code if not supported] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | block/sed-opal: allocate struct opal_dev dynamicallyChristoph Hellwig2017-02-171-112/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Insted of bloating the containing structure with it all the time this allocates struct opal_dev dynamically. Additionally this allows moving the definition of struct opal_dev into sed-opal.c. For this a new private data field is added to it that is passed to the send/receive callback. After that a lot of internals can be made private as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASANScott Bauer2017-02-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_KASAN is enabled, compilation fails: block/sed-opal.c: In function 'sed_ioctl': block/sed-opal.c:2447:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Moved all the ioctl structures off the stack and dynamically allocate using _IOC_SIZE() Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | uapi: sed-opal fix IOW for activate lsp to use correct structScott Bauer2017-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IOC_OPAL_ACTIVATE_LSP took the wrong strcure which would give us the wrong size when using _IOC_SIZE, switch it to the right structure. Fixes: 058f8a2 ("Include: Uapi: Add user ABI for Sed/Opal") Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | cdrom: Make device operations read-onlyKees Cook2017-02-141-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since function tables are a common target for attackers, it's best to keep them in read-only memory. As such, this makes the CDROM device ops tables const. This drops additionally n_minors, since it isn't used meaningfully, and sets the only user of cdrom_dummy_generic_packet explicitly so the variables can all be const. Inspired by similar changes in grsecurity/PaX. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | Fix SED-OPAL UAPI structs to prevent 32/64 bit size differences.Scott Bauer2017-02-061-17/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a quick fixup of the user structures that will prevent the structures from being different sizes on 32 and 64 bit archs. Taking this fix will allow us to *NOT* have to do compat ioctls for the sed code. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Fixes: 19641f2d7674 ("Include: Uapi: Add user ABI for Sed/Opal") Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | block: Add Sed-opal libraryScott Bauer2017-02-061-0/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | Include: Uapi: Add user ABI for Sed/OpalScott Bauer2017-02-061-0/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: allow targets to use sysfsJavier González2017-01-311-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to register through the sysfs interface, a driver needs to know its kobject. On a disk structure, this happens when the partition information is added (device_add_disk), which for lightnvm takes place after the target has been initialized. This means that on target initialization, the kboject has not been created yet. This patch adds a target function to let targets initialize their own kboject as a child of the disk kobject. Signed-off-by: Javier González <javier@cnexlabs.com> Added exit typedef and passed gendisk instead of void pointer for exit. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: Add CRC read errorJavier González2017-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the host differentiate between a read error and a CRC check error on the device side. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: use end_io callback instead of instanceMatias Bjørling2017-01-311-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the lightnvm core had the "gennvm" layer between the device and the target, there was a need for the core to be able to figure out which target it should send an end_io callback to. Leading to a "double" end_io, first for the media manager instance, and then for the target instance. Now that core and gennvm is merged, there is no longer a need for this, and a single end_io callback will do. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: add ioctls for vector I/OsMatias Bjørling2017-01-311-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable user-space to issue vector I/O commands through ioctls. To issue a vector I/O, the ppa list with addresses is also required and must be mapped for the controller to access. For each ioctl, the result and status bits are returned as well, such that user-space can retrieve the open-channel SSD completion bits. The implementation covers the traditional use-cases of bad block management, and vectored read/write/erase. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Metadata implementation, test, and fixes. Signed-off-by: Simon A.F. Lund <slund@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: reduce number of nvm_id groups to oneMatias Bjørling2017-01-311-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of configuration groups has been limited to one in current code, even if there is support for up to four. With the introduction of the open-channel SSD 1.3 specification, only a single group is exposed onwards. Reflect this in the nvm_id structure. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: cleanup nvm transformation functionsMatias Bjørling2017-01-311-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Going from target specific ppa addresses to device was accomplished by first converting target to generic ppa addresses and generic to device addresses. The conversion was either open-coded or used the built-in nvm_trans_* and nvm_map_* functions for conversion. Simplify the interface and cleanup the calls to provide clean functions that now either take a list of ppas or a nvm_rq, and is exposed through: void nvm_ppa_* - target to/from device with a list of PPAs, void nvm_rq_* - target to/from device with a nvm_rq. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: remove nvm_get_bb_tbl and nvm_set_bb_tblMatias Bjørling2017-01-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the merge of gennvm and core, there is no longer a need for the device specific bad block functions. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| | * | | lightnvm: remove nvm_submit_ppa* functionsMatias Bjørling2017-01-311-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nvm_submit_ppa* functions are no longer needed after gennvm and core have been merged. Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 16:19:24 +0000