summaryrefslogtreecommitdiffstats
path: root/net/bridge/br_fdb.c
Commit message (Collapse)AuthorAgeFilesLines
* rtnetlink: add extack support in fdb del handlersAlaa Mohamed2022-05-091-1/+2
| | | | | | | | Add extack support to .ndo_fdb_del in netdevice.h and all related methods. Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: add support for flush filtering based on ifindex and vlanNikolay Aleksandrov2022-04-131-1/+44
| | | | | | | | | | Add support for fdb flush filtering based on destination ifindex and vlan id. The ifindex must either match a port's device ifindex or the bridge's. The vlan support is trivial since it's already validated by rtnl_fdb_del, we just need to fill it in. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: add support for flush filtering based on ndm flags and stateNikolay Aleksandrov2022-04-131-3/+55
| | | | | | | | | | | | Add support for fdb flush filtering based on ndm flags and state. NDM state and flags are mapped to bridge-specific flags and matched according to the specified masks. NTF_USE is used to represent added_by_user flag since it sets it on fdb add and we don't have a 1:1 mapping for it. Only allowed bits can be set, NTF_SELF and NTF_MASTER are ignored. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: add support for fine-grained flushingNikolay Aleksandrov2022-04-131-8/+33
| | | | | | | | | | | | | | Add the ability to specify exactly which fdbs to be flushed. They are described by a new structure - net_bridge_fdb_flush_desc. Currently it can match on port/bridge ifindex, vlan id and fdb flags. It is used to describe the existing dynamic fdb flush operation. Note that this flush operation doesn't treat permanent entries in a special way (fdb_delete vs fdb_delete_local), it will delete them regardless if any port is using them, so currently it can't directly replace deletes which need to handle that case, although we can extend it later for that too. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: add ndo_fdb_del_bulkNikolay Aleksandrov2022-04-131-0/+23
| | | | | | | | | Add a minimal ndo_fdb_del_bulk implementation which flushes all entries. Support for more fine-grained filtering will be added in the following patches. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: move br_fdb_replay inside br_switchdev.cVladimir Oltean2021-10-271-54/+0
| | | | | | | | | | | | | | | | | | br_fdb_replay is only called from switchdev code paths, so it makes sense to be disabled if switchdev is not enabled in the first place. As opposed to br_mdb_replay and br_vlan_replay which might be turned off depending on bridge support for multicast and VLANs, FDB support is always on. So moving br_mdb_replay and br_vlan_replay inside br_switchdev.c would mean adding some #ifdef's in br_switchdev.c, so we keep those where they are. The reason for the movement is that in future changes there will be some code reuse between br_switchdev_fdb_notify and br_fdb_replay. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: reduce indentation level in fdb_createVladimir Oltean2021-10-271-14/+17
| | | | | | | | | | We can express the same logic without an "if" condition as big as the function, just return early if the kmem_cache_alloc() call fails. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: rename br_fdb_insert to br_fdb_add_localVladimir Oltean2021-10-271-2/+2
| | | | | | | | | | | | | br_fdb_insert() is a wrapper over fdb_insert() that also takes the bridge hash_lock. With fdb_insert() being renamed to fdb_add_local(), rename br_fdb_insert() to br_fdb_add_local(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: rename fdb_insert to fdb_add_localVladimir Oltean2021-10-271-7/+7
| | | | | | | | | | | | | | | | | | | | | | fdb_insert() is not a descriptive name for this function, and also easy to confuse with __br_fdb_add(), fdb_add_entry(), br_fdb_update(). Even more confusingly, it is not even related in any way with those functions, neither one calls the other. Since fdb_insert() basically deals with the creation of a BR_FDB_LOCAL entry and is called only from functions where that is the intention: - br_fdb_changeaddr - br_fdb_change_mac_address - br_fdb_insert then rename it to fdb_add_local(), because its removal counterpart is called fdb_delete_local(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: remove fdb_insert forward declarationVladimir Oltean2021-10-271-59/+57
| | | | | | | | | | | | | | fdb_insert() has a forward declaration because its first caller, br_fdb_changeaddr(), is declared before fdb_create(), a function which fdb_insert() needs. This patch moves the 2 functions above br_fdb_changeaddr() and deletes the forward declaration for fdb_insert(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: remove fdb_notify forward declarationVladimir Oltean2021-10-271-124/+122
| | | | | | | | | | | | | | fdb_notify() has a forward declaration because its first caller, fdb_delete(), is declared before 3 functions that fdb_notify() needs: fdb_to_nud(), fdb_fill_info() and fdb_nlmsg_size(). This patch moves the aforementioned 4 functions above fdb_delete() and deletes the forward declaration. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: make use of helper netif_is_bridge_master()Kyungrok Chung2021-10-161-3/+3
| | | | | | | | | Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by: Kyungrok Chung <acadx0@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-08-131-7/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: bridge: fix flags interpretation for extern learn fdb entriesNikolay Aleksandrov2021-08-101-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ignore fdb flags when adding port extern learn entries and always set BR_FDB_LOCAL flag when adding bridge extern learn entries. This is closest to the behaviour we had before and avoids breaking any use cases which were allowed. This patch fixes iproute2 calls which assume NUD_PERMANENT and were allowed before, example: $ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn Extern learn entries are allowed to roam, but do not expire, so static or dynamic flags make no sense for them. Also add a comment for future reference. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Fixes: 0541a6293298 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-08-051-6/+24
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB ↵Vladimir Oltean2021-08-021-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | entry Currently it is possible to add broken extern_learn FDB entries to the bridge in two ways: 1. Entries pointing towards the bridge device that are not local/permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static 2. Entries pointing towards the bridge device or towards a port that are marked as local/permanent, however the bridge does not process the 'permanent' bit in any way, therefore they are recorded as though they aren't permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent Since commit 52e4bec15546 ("net: bridge: switchdev: treat local FDBs the same as entries towards the bridge"), these incorrect FDB entries can even trigger NULL pointer dereferences inside the kernel. This is because that commit made the assumption that all FDB entries that are not local/permanent have a valid destination port. For context, local / permanent FDB entries either have fdb->dst == NULL, and these point towards the bridge device and are therefore local and not to be used for forwarding, or have fdb->dst == a net_bridge_port structure (but are to be treated in the same way, i.e. not for forwarding). That assumption _is_ correct as long as things are working correctly in the bridge driver, i.e. we cannot logically have fdb->dst == NULL under any circumstance for FDB entries that are not local. However, the extern_learn code path where FDB entries are managed by a user space controller show that it is possible for the bridge kernel driver to misinterpret the NUD flags of an entry transmitted by user space, and end up having fdb->dst == NULL while not being a local entry. This is invalid and should be rejected. Before, the two commands listed above both crashed the kernel in this check from br_switchdev_fdb_notify: struct net_device *dev = info.is_local ? br->dev : dst->dev; info.is_local == false, dst == NULL. After this patch, the invalid entry added by the first command is rejected: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0 Error: bridge: FDB entry towards bridge must be permanent. and the valid entry added by the second command is properly treated as a local address and does not crash br_switchdev_fdb_notify anymore: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0 Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: bridge: switchdev: fix incorrect use of FDB flags when picking the dst ↵Vladimir Oltean2021-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device Nikolay points out that it is incorrect to assume that it is impossible to have an fdb entry with fdb->dst == NULL and the BR_FDB_LOCAL bit in fdb->flags not set. This is because there are reader-side places that test_bit(BR_FDB_LOCAL, &fdb->flags) without the br->hash_lock, and if the updating of the FDB entry happens on another CPU, there are no memory barriers at writer or reader side which would ensure that the reader sees the updates to both fdb->flags and fdb->dst in the same order, i.e. the reader will not see an inconsistent FDB entry. So we must be prepared to deal with FDB entries where fdb->dst and fdb->flags are in a potentially inconsistent state, and that means that fdb->dst == NULL should remain a condition to pick the net_device that we report to switchdev as being the bridge device, which is what the code did prior to the blamed patch. Fixes: 52e4bec15546 ("net: bridge: switchdev: treat local FDBs the same as entries towards the bridge") Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210802113633.189831-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: bridge: switchdev: treat local FDBs the same as entries towards the bridgeVladimir Oltean2021-07-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the following script: 1. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up 2. ip link set swp2 up && ip link set swp2 master br0 3. ip link set swp3 up && ip link set swp3 master br0 4. ip link set swp4 up && ip link set swp4 master br0 5. bridge vlan del dev swp2 vid 1 6. bridge vlan del dev swp3 vid 1 7. ip link set swp4 nomaster 8. ip link set swp3 nomaster produces the following output: [ 641.010738] sja1105 spi0.1: port 2 failed to delete 00:1f:7b:63:02:48 vid 1 from fdb: -2 [ swp2, swp3 and br0 all have the same MAC address, the one listed above ] In short, this happens because the number of FDB entry additions notified to switchdev is unbalanced with the number of deletions. At step 1, the bridge has a random MAC address. At step 2, the br_fdb_replay of swp2 receives this initial MAC address. Then the bridge inherits the MAC address of swp2 via br_fdb_change_mac_address(), and it notifies switchdev (only swp2 at this point) of the deletion of the random MAC address and the addition of 00:1f:7b:63:02:48 as a local FDB entry with fdb->dst == swp2, in VLANs 0 and the default_pvid (1). During step 7: del_nbp -> br_fdb_delete_by_port(br, p, vid=0, do_all=1); -> fdb_delete_local(br, p, f); br_fdb_delete_by_port() deletes all entries towards the ports, regardless of vid, because do_all is 1. fdb_delete_local() has logic to migrate local FDB entries deleted from one port to another port which shares the same MAC address and is in the same VLAN, or to the bridge device itself. This migration happens without notifying switchdev of the deletion on the old port and the addition on the new one, just fdb->dst is changed and the added_by_user flag is cleared. In the example above, the del_nbp(swp4) causes the "addr 00:1f:7b:63:02:48 vid 1" local FDB entry with fdb->dst == swp4 that existed up until then to be migrated directly towards the bridge (fdb->dst == NULL). This is because it cannot be migrated to any of the other ports (swp2 and swp3 are not in VLAN 1). After the migration to br0 takes place, swp4 requests a deletion replay of all FDB entries. Since the "addr 00:1f:7b:63:02:48 vid 1" entry now point towards the bridge, a deletion of it is replayed. There was just a prior addition of this address, so the switchdev driver deletes this entry. Then, the del_nbp(swp3) at step 8 triggers another br_fdb_replay, and switchdev is notified again to delete "addr 00:1f:7b:63:02:48 vid 1". But it can't because it no longer has it, so it returns -ENOENT. There are other possibilities to trigger this issue, but this is by far the simplest to explain. To fix this, we must avoid the situation where the addition of an FDB entry is notified to switchdev as a local entry on a port, and the deletion is notified on the bridge itself. Considering that the 2 types of FDB entries are completely equivalent and we cannot have the same MAC address as a local entry on 2 bridge ports, or on a bridge port and pointing towards the bridge at the same time, it makes sense to hide away from switchdev completely the fact that a local FDB entry is associated with a given bridge port at all. Just say that it points towards the bridge, it should make no difference whatsoever to the switchdev driver and should even lead to a simpler overall implementation, will less cases to handle. This also avoids any modification at all to the core bridge driver, just what is reported to switchdev changes. With the local/permanent entries on bridge ports being already reported to user space, it is hard to believe that the bridge behavior can change in any backwards-incompatible way such as making all local FDB entries point towards the bridge. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: switchdev: replay the entire FDB for each portVladimir Oltean2021-07-281-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when a switchdev port joins a bridge, we replay all FDB entries pointing towards that port or towards the bridge. However, this is insufficient in certain situations: (a) DSA, through its assisted_learning_on_cpu_port logic, snoops dynamically learned FDB entries on foreign interfaces. These are FDB entries that are pointing neither towards the newly joined switchdev port, nor towards the bridge. So these addresses would be missed when joining a bridge where a foreign interface has already learned some addresses, and they would also linger on if the DSA port leaves the bridge before the foreign interface forgets them. None of this happens if we replay the entire FDB when the port joins. (b) There is a desire to treat local FDB entries on a port (i.e. the port's termination MAC address) identically to FDB entries pointing towards the bridge itself. More details on the reason behind this in the next patch. The point is that this cannot be done given the current structure of br_fdb_replay() in this situation: ip link set swp0 master br0 # br0 inherits its MAC address from swp0 ip link set swp1 master br0 What is desirable is that when swp1 joins the bridge, br_fdb_replay() also notifies swp1 of br0's MAC address, but this won't in fact happen because the MAC address of br0 does not have fdb->dst == NULL (it doesn't point towards the bridge), but it has fdb->dst == swp0. So our current logic makes it impossible for that address to be replayed. But if we dump the entire FDB instead of just the entries with fdb->dst == swp1 and fdb->dst == NULL, then the inherited MAC address of br0 will be replayed too, which is what we need. A natural question arises: say there is an FDB entry to be replayed, like a MAC address dynamically learned on a foreign interface that belongs to a bridge where no switchdev port has joined yet. If 10 switchdev ports belonging to the same driver join this bridge, one by one, won't every port get notified 10 times of the foreign FDB entry, amounting to a total of 100 notifications for this FDB entry in the switchdev driver? Well, yes, but this is where the "void *ctx" argument for br_fdb_replay is useful: every port of the switchdev driver is notified whenever any other port requests an FDB replay, but because the replay was initiated by a different port, its context is different from the initiating port's context, so it ignores those replays. So the foreign FDB entry will be installed only 10 times, once per port. This is done so that the following 4 code paths are always well balanced: (a) addition of foreign FDB entry is replayed when port joins bridge (b) deletion of foreign FDB entry is replayed when port leaves bridge (c) addition of foreign FDB entry is notified to all ports currently in bridge (c) deletion of foreign FDB entry is notified to all ports currently in bridge Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2021-07-231-1/+1
|\| | | | | | | | | | | Conflicts are simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bridge: do not replay fdb entries pointing towards the bridge twiceVladimir Oltean2021-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simple script: ip link add br0 type bridge ip link set swp2 master br0 ip link set br0 address 00:01:02:03:04:05 ip link del br0 produces this result on a DSA switch: [ 421.306399] br0: port 1(swp2) entered blocking state [ 421.311445] br0: port 1(swp2) entered disabled state [ 421.472553] device swp2 entered promiscuous mode [ 421.488986] device swp2 left promiscuous mode [ 421.493508] br0: port 1(swp2) entered disabled state [ 421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT [ 421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT [ 421.943982] br0: port 1(swp2) entered blocking state [ 421.949030] br0: port 1(swp2) entered disabled state [ 422.112504] device swp2 entered promiscuous mode A very simplified view of what happens is: (1) the bridge port is created, and the bridge device inherits its MAC address (2) when joining, the bridge port (DSA) requests a replay of the addition of all FDB entries towards this bridge port and towards the bridge device itself. In fact, DSA calls br_fdb_replay() twice: br_fdb_replay(br, brport_dev); br_fdb_replay(br, br); DSA uses reference counting for the FDB entries. So the MAC address of the bridge is simply kept with refcount 2. When the bridge port leaves under normal circumstances, everything cancels out since the replay of the FDB entry deletion is also done twice per VLAN. (3) when the bridge MAC address changes, switchdev is notified of the deletion of the old address and of the insertion of the new one. But the old address does not really go away, since it had refcount 2, and the new address is added "only" with refcount 1. (4) when the bridge port leaves now, it will replay a deletion of the FDB entries pointing towards the bridge twice. Then DSA will complain that it can't delete something that no longer exists. It is clear that the problem is that the FDB entries towards the bridge are replayed too many times, so let's fix that problem. Fixes: 63c51453c82c ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: bridge: move the switchdev object replay helpers to "push" modeVladimir Oltean2021-07-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"), DSA has introduced some bridge helpers that replay switchdev events (FDB/MDB/VLAN additions and deletions) that can be lost by the switchdev drivers in a variety of circumstances: - an IP multicast group was host-joined on the bridge itself before any switchdev port joined the bridge, leading to the host MDB entries missing in the hardware database. - during the bridge creation process, the MAC address of the bridge was added to the FDB as an entry pointing towards the bridge device itself, but with no switchdev ports being part of the bridge yet, this local FDB entry would remain unknown to the switchdev hardware database. - a VLAN/FDB/MDB was added to a bridge port that is a LAG interface, before any switchdev port joined that LAG, leading to the hardware database missing those entries. - a switchdev port left a LAG that is a bridge port, while the LAG remained part of the bridge, and all FDB/MDB/VLAN entries remained installed in the hardware database of the switchdev port. Also, since commit 0d2cfbd41c4a ("net: bridge: ignore switchdev events for LAG ports which didn't request replay"), DSA introduced a method, based on a const void *ctx, to ensure that two switchdev ports under the same LAG that is a bridge port do not see the same MDB/VLAN entry being replayed twice by the bridge, once for every bridge port that joins the LAG. With so many ordering corner cases being possible, it seems unreasonable to expect a switchdev driver writer to get it right from the first try. Therefore, now that DSA has experimented with the bridge replay helpers for a little bit, we can move the code to the bridge driver where it is more readily available to all switchdev drivers. To convert the switchdev object replay helpers from "pull mode" (where the driver asks for them) to a "push mode" (where the bridge offers them automatically), the biggest problem is that the bridge needs to be aware when a switchdev port joins and leaves, even when the switchdev is only indirectly a bridge port (for example when the bridge port is a LAG upper of the switchdev). Luckily, we already have a hook for that, in the form of the newly introduced switchdev_bridge_port_offload() and switchdev_bridge_port_unoffload() calls. These offer a natural place for hooking the object addition and deletion replays. Extend the above 2 functions with: - pointers to the switchdev atomic notifier (for FDB replays) and the blocking notifier (for MDB and VLAN replays). - the "const void *ctx" argument required for drivers to be able to disambiguate between which port is targeted, when multiple ports are lowers of the same LAG that is a bridge port. Most of the drivers pass NULL to this argument, except the ones that support LAG offload and have the proper context check already in place in the switchdev blocking notifier handler. Also unexport the replay helpers, since nobody except the bridge calls them directly now. Note that: (a) we abuse the terminology slightly, because FDB entries are not "switchdev objects", but we count them as objects nonetheless. With no direct way to prove it, I think they are not modeled as switchdev objects because those can only be installed by the bridge to the hardware (as opposed to FDB entries which can be propagated in the other direction too). This is merely an abuse of terms, FDB entries are replayed too, despite not being objects. (b) the bridge does not attempt to sync port attributes to newly joined ports, just the countable stuff (the objects). The reason for this is simple: no universal and symmetric way to sync and unsync them is known. For example, VLAN filtering: what to do on unsync, disable or leave it enabled? Similarly, STP state, ageing timer, etc etc. What a switchdev port does when it becomes standalone again is not really up to the bridge's competence, and the driver should deal with it. On the other hand, replaying deletions of switchdev objects can be seen a matter of cleanup and therefore be treated by the bridge, hence this patch. We make the replay helpers opt-in for drivers, because they might not bring immediate benefits for them: - nbp_vlan_init() is called _after_ netdev_master_upper_dev_link(), so br_vlan_replay() should not do anything for the new drivers on which we call it. The existing drivers where there was even a slight possibility for there to exist a VLAN on a bridge port before they join it are already guarded against this: mlxsw and prestera deny joining LAG interfaces that are members of a bridge. - br_fdb_replay() should now notify of local FDB entries, but I patched all drivers except DSA to ignore these new entries in commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"). Driver authors can lift this restriction as they wish, and when they do, they can also opt into the FDB replay functionality. - br_mdb_replay() should fix a real issue which is described in commit 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries"). However most drivers do not offload the SWITCHDEV_OBJ_ID_HOST_MDB to see this issue: only cpsw and am65_cpsw offload this switchdev object, and I don't completely understand the way in which they offload this switchdev object anyway. So I'll leave it up to these drivers' respective maintainers to opt into br_mdb_replay(). So most of the drivers pass NULL notifier blocks for the replay helpers, except: - dpaa2-switch which was already acked/regression-tested with the helpers enabled (and there isn't much of a downside in having them) - ocelot which already had replay logic in "pull" mode - DSA which already had replay logic in "pull" mode An important observation is that the drivers which don't currently request bridge event replays don't even have the switchdev_bridge_port_{offload,unoffload} calls placed in proper places right now. This was done to avoid unnecessary rework for drivers which might never even add support for this. For driver writers who wish to add replay support, this can be used as a tentative placement guide: https://patchwork.kernel.org/project/netdevbpf/patch/20210720134655.892334-11-vladimir.oltean@nxp.com/ Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: guard the switchdev replay helpers against a NULL notifier blockVladimir Oltean2021-07-221-0/+3
|/ | | | | | | | | | | | | | | There is a desire to make the object and FDB replay helpers optional when moving them inside the bridge driver. For example a certain driver might not offload host MDBs and there is no case where the replay helpers would be of immediate use to it. So it would be nice if we could allow drivers to pass NULL pointers for the atomic and blocking notifier blocks, and the replay helpers to do nothing in that case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: allow br_fdb_replay to be called for the bridge deviceVladimir Oltean2021-06-291-1/+4
| | | | | | | | | | When a port joins a bridge which already has local FDB entries pointing to the bridge device itself, we would like to offload those, so allow the "dev" argument to be equal to the bridge too. The code already does what we need in that case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: switchdev: send FDB notifications for host addressesTobias Waldekranz2021-06-291-2/+2
| | | | | | | | | | Treat addresses added to the bridge itself in the same way as regular ports and send out a notification so that drivers may sync it down to the hardware FDB. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: use READ_ONCE() and WRITE_ONCE() compiler barriers for fdb->dstVladimir Oltean2021-06-291-11/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Annotate the writer side of fdb->dst: - fdb_create() - br_fdb_update() - fdb_add_entry() - br_fdb_external_learn_add() with WRITE_ONCE() and the reader side: - br_fdb_test_addr() - br_fdb_update() - fdb_fill_info() - fdb_add_entry() - fdb_delete_by_addr_and_port() - br_fdb_external_learn_add() - br_switchdev_fdb_notify() with compiler barriers such that the readers do not attempt to reload fdb->dst multiple times, leading to potentially different destination ports when the fdb entry is updated concurrently. This is especially important in read-side sections where fdb->dst is used more than once, but let's convert all accesses for the sake of uniformity. Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: allow the switchdev replay functions to be called for deletionVladimir Oltean2021-06-281-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a switchdev port leaves a LAG that is a bridge port, the switchdev objects and port attributes offloaded to that port are not removed: ip link add br0 type bridge ip link add bond0 type bond mode 802.3ad ip link set swp0 master bond0 ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 nomaster VLAN 100 will remain installed on swp0 despite it going into standalone mode, because as far as the bridge is concerned, nothing ever happened to its bridge port. Let's extend the bridge vlan, fdb and mdb replay functions to take a 'bool adding' argument, and make DSA and ocelot call the replay functions with 'adding' as false from the switchdev unsync path, for the switch port that leaves the bridge. Note that this patch in itself does not salvage anything, because in the current pull mode of operation, DSA still needs to call the replay helpers with adding=false. This will be done in another patch. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: constify variables in the replay helpersVladimir Oltean2021-06-281-3/+3
| | | | | | | | | Some of the arguments and local variables for the newly added switchdev replay helpers can be const, so let's make them so. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: ignore switchdev events for LAG ports which didn't request replayVladimir Oltean2021-06-281-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a slight inconvenience in the switchdev replay helpers added recently, and this is when: ip link add br0 type bridge ip link add bond0 type bond ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 master bond0 ip link set swp1 master bond0 Since the underlying driver (currently only DSA) asks for a replay of VLANs when swp0 and swp1 join the LAG because it is bridged, what will happen is that DSA will try to react twice on the VLAN event for swp0. This is not really a huge problem right now, because most drivers accept duplicates since the bridge itself does, but it will become a problem when we add support for replaying switchdev object deletions. Let's fix this by adding a blank void *ctx in the replay helpers, which will be passed on by the bridge in the switchdev notifications. If the context is NULL, everything is the same as before. But if the context is populated with a valid pointer, the underlying switchdev driver (currently DSA) can use the pointer to 'see through' the bridge port (which in the example above is bond0) and 'know' that the event is only for a particular physical port offloading that bridge port, and not for all of them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: include the is_local bit in br_fdb_replayVladimir Oltean2021-06-281-0/+1
| | | | | | | | | | | | | Since commit 2c4eca3ef716 ("net: bridge: switchdev: include local flag in FDB notifications"), the bridge emits SWITCHDEV_FDB_ADD_TO_DEVICE events with the is_local flag populated (but we ignore it nonetheless). We would like DSA to start treating this bit, but it is still not populated by the replay helper, so add it there too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: add helper to replay port and local fdb entriesVladimir Oltean2021-03-231-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a switchdev port starts offloading a LAG that is already in a bridge and has an FDB entry pointing to it: ip link set bond0 master br0 bridge fdb add dev bond0 00:01:02:03:04:05 master static ip link set swp0 master bond0 the switchdev driver will have no idea that this FDB entry is there, because it missed the switchdev event emitted at its creation. Ido Schimmel pointed this out during a discussion about challenges with switchdev offloading of stacked interfaces between the physical port and the bridge, and recommended to just catch that condition and deny the CHANGEUPPER event: https://lore.kernel.org/netdev/20210210105949.GB287766@shredder.lan/ But in fact, we might need to deal with the hard thing anyway, which is to replay all FDB addresses relevant to this port, because it isn't just static FDB entries, but also local addresses (ones that are not forwarded but terminated by the bridge). There, we can't just say 'oh yeah, there was an upper already so I'm not joining that'. So, similar to the logic for replaying MDB entries, add a function that must be called by individual switchdev drivers and replays local FDB entries as well as ones pointing towards a bridge port. This time, we use the atomic switchdev notifier block, since that's what FDB entries expect for some reason. Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: notify switchdev of disappearance of old FDB entry upon migrationVladimir Oltean2021-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the bridge emits atomic switchdev notifications for dynamically learnt FDB entries. Monitoring these notifications works wonders for switchdev drivers that want to keep their hardware FDB in sync with the bridge's FDB. For example station A wants to talk to station B in the diagram below, and we are concerned with the behavior of the bridge on the DUT device: DUT +-------------------------------------+ | br0 | | +------+ +------+ +------+ +------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | eth0 | | +-------------------------------------+ | | | Station A | | | | +--+------+--+ +--+------+--+ | | | | | | | | | | swp0 | | | | swp0 | | Another | +------+ | | +------+ | Another switch | br0 | | br0 | switch | +------+ | | +------+ | | | | | | | | | | | swp1 | | | | swp1 | | +--+------+--+ +--+------+--+ | Station B Interfaces swp0, swp1, swp2 are handled by a switchdev driver that has the following property: frames injected from its control interface bypass the internal address analyzer logic, and therefore, this hardware does not learn from the source address of packets transmitted by the network stack through it. So, since bridging between eth0 (where Station B is attached) and swp0 (where Station A is attached) is done in software, the switchdev hardware will never learn the source address of Station B. So the traffic towards that destination will be treated as unknown, i.e. flooded. This is where the bridge notifications come in handy. When br0 on the DUT sees frames with Station B's MAC address on eth0, the switchdev driver gets these notifications and can install a rule to send frames towards Station B's address that are incoming from swp0, swp1, swp2, only towards the control interface. This is all switchdev driver private business, which the notification makes possible. All is fine until someone unplugs Station B's cable and moves it to the other switch: DUT +-------------------------------------+ | br0 | | +------+ +------+ +------+ +------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | eth0 | | +-------------------------------------+ | | | Station A | | | | +--+------+--+ +--+------+--+ | | | | | | | | | | swp0 | | | | swp0 | | Another | +------+ | | +------+ | Another switch | br0 | | br0 | switch | +------+ | | +------+ | | | | | | | | | | | swp1 | | | | swp1 | | +--+------+--+ +--+------+--+ | Station B Luckily for the use cases we care about, Station B is noisy enough that the DUT hears it (on swp1 this time). swp1 receives the frames and delivers them to the bridge, who enters the unlikely path in br_fdb_update of updating an existing entry. It moves the entry in the software bridge to swp1 and emits an addition notification towards that. As far as the switchdev driver is concerned, all that it needs to ensure is that traffic between Station A and Station B is not forever broken. If it does nothing, then the stale rule to send frames for Station B towards the control interface remains in place. But Station B is no longer reachable via the control interface, but via a port that can offload the bridge port learning attribute. It's just that the port is prevented from learning this address, since the rule overrides FDB updates. So the rule needs to go. The question is via what mechanism. It sure would be possible for this switchdev driver to keep track of all addresses which are sent to the control interface, and then also listen for bridge notifier events on its own ports, searching for the ones that have a MAC address which was previously sent to the control interface. But this is cumbersome and inefficient. Instead, with one small change, the bridge could notify of the address deletion from the old port, in a symmetrical manner with how it did for the insertion. Then the switchdev driver would not be required to monitor learn/forget events for its own ports. It could just delete the rule towards the control interface upon bridge entry migration. This would make hardware address learning be possible again. Then it would take a few more packets until the hardware and software FDB would be in sync again. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: bridge: fdb: don't flush ext_learn entriesNikolay Aleksandrov2020-09-281-0/+2
| | | | | | | | | | | | | | | | | | When a user-space software manages fdb entries externally it should set the ext_learn flag which marks the fdb entry as externally managed and avoids expiring it (they're treated as static fdbs). Unfortunately on events where fdb entries are flushed (STP down, netlink fdb flush etc) these fdbs are also deleted automatically by the bridge. That in turn causes trouble for the managing user-space software (e.g. in MLAG setups we lose remote fdb entries on port flaps). These entries are completely externally managed so we should avoid automatically deleting them, the only exception are offloaded entries (i.e. BR_FDB_ADDED_BY_EXT_LEARN + BR_FDB_OFFLOADED). They are flushed as before. Fixes: eb100e0e24a2 ("net: bridge: allow to add externally learned entries from user-space") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: add a flag to avoid refreshing fdb when changing/addingNikolay Aleksandrov2020-06-241-1/+4
| | | | | | | | | | | When we modify or create a new fdb entry sometimes we want to avoid refreshing its activity in order to track it properly. One example is when a mac is received from EVPN multi-homing peer by FRR, which doesn't want to change local activity accounting. It makes it static and sets a flag to track its activity. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: add option to allow activity notifications for any fdb entriesNikolay Aleksandrov2020-06-241-13/+104
| | | | | | | | | | | | | | | | | This patch adds the ability to notify about activity of any entries (static, permanent or ext_learn). EVPN multihoming peers need it to properly and efficiently handle mac sync (peer active/locally active). We add a new NFEA_ACTIVITY_NOTIFY attribute which is used to dump the current activity state and to control if static entries should be monitored at all. We use 2 bits - one to activate fdb entry tracking (disabled by default) and the second to denote that an entry is inactive. We need the second bit in order to avoid multiple notifications of inactivity. Obviously this makes no difference for dynamic entries since at the time of inactivity they get deleted, while the tracked non-dynamic entries get the inactive bit set and get a notification. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb_add_entry takes ndm as argumentNikolay Aleksandrov2020-06-241-5/+4
| | | | | | | We can just pass ndm as an argument instead of its fields separately. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: eliminate extra port state tests from fast-pathNikolay Aleksandrov2019-11-041-5/+3
| | | | | | | | | | | | | | | | | | When commit df1c0b8468b3 ("[BRIDGE]: Packets leaking out of disabled/blocked ports.") introduced the port state tests in br_fdb_update() it was to avoid learning/refreshing from STP BPDUs, it was also used to avoid learning/refreshing from user-space with NTF_USE. Those two tests are done for every packet entering the bridge if it's learning, but for the fast-path we already have them checked in br_handle_frame() and is unnecessary to do it again. Thus push the checks to the unlikely cases and drop them from br_fdb_update(), the new nbp_state_should_learn() helper is used to determine if the port state allows br_fdb_update() to be called. The two places which need to do it manually are: - user-space add call with NTF_USE set - link-local packet learning done in __br_handle_local_finish() Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: restore unlikely() when taking over externally added entriesNikolay Aleksandrov2019-11-011-2/+4
| | | | | | | | | Taking over hw-learned entries is not a likely scenario so restore the unlikely() use for the case of SW taking over externally learned entries. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: avoid two atomic bitops in br_fdb_external_learn_add()Nikolay Aleksandrov2019-11-011-4/+5
| | | | | | | | If we setup the fdb flags prior to calling fdb_create() we can avoid two atomic bitops when learning a new entry. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: br_fdb_update can take flags directlyNikolay Aleksandrov2019-11-011-9/+6
| | | | | | | | If we modify br_fdb_update() to take flags directly we can get rid of one test and one atomic bitop in the learning path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: set flags directly in fdb_createNikolay Aleksandrov2019-10-291-11/+7
| | | | | | | | No need to have separate arguments for each flag, just set the flags to whatever was passed to fdb_create() before the fdb is published. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert offloaded to use bitopsNikolay Aleksandrov2019-10-291-5/+4
| | | | | | | Convert the offloaded field to a flag and use bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert added_by_external_learn to use bitopsNikolay Aleksandrov2019-10-291-10/+9
| | | | | | | Convert the added_by_external_learn field to a flag and use bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert added_by_user to bitopsNikolay Aleksandrov2019-10-291-13/+12
| | | | | | | Straight-forward convert of the added_by_user field to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert is_sticky to bitopsNikolay Aleksandrov2019-10-291-6/+6
| | | | | | | Straight-forward convert of the is_sticky field to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert is_static to bitopsNikolay Aleksandrov2019-10-291-21/+19
| | | | | | | | Convert the is_static to bitops, make use of the combined test_and_set/clear_bit to simplify expressions in fdb_add_entry. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: fdb: convert is_local to bitopsNikolay Aleksandrov2019-10-291-13/+19
| | | | | | | | The patch adds a new fdb flags field in the hole between the two cache lines and uses it to convert is_local to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rhashtable: use bit_spin_locks to protect hash bucket.NeilBrown2019-04-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the bucket pointer to lock the hash chain for that bucket. The benefits of a bit spin_lock are: - no need to allocate a separate array of locks. - no need to have a configuration option to guide the choice of the size of this array - locking cost is often a single test-and-set in a cache line that will have to be loaded anyway. When inserting at, or removing from, the head of the chain, the unlock is free - writing the new address in the bucket head implicitly clears the lock bit. For __rhashtable_insert_fast() we ensure this always happens when adding a new key. - even when lockings costs 2 updates (lock and unlock), they are in a cacheline that needs to be read anyway. The cost of using a bit spin_lock is a little bit of code complexity, which I think is quite manageable. Bit spin_locks are sometimes inappropriate because they are not fair - if multiple CPUs repeatedly contend of the same lock, one CPU can easily be starved. This is not a credible situation with rhashtable. Multiple CPUs may want to repeatedly add or remove objects, but they will typically do so at different buckets, so they will attempt to acquire different locks. As we have more bit-locks than we previously had spinlocks (by at least a factor of two) we can expect slightly less contention to go with the slightly better cache behavior and reduced memory consumption. To enhance type checking, a new struct is introduced to represent the pointer plus lock-bit that is stored in the bucket-table. This is "struct rhash_lock_head" and is empty. A pointer to this needs to be cast to either an unsigned lock, or a "struct rhash_head *" to be useful. Variables of this type are most often called "bkt". Previously "pprev" would sometimes point to a bucket, and sometimes a ->next pointer in an rhash_head. As these are now different types, pprev is NULL when it would have pointed to the bucket. In that case, 'blk' is used, together with correct locking protocol. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-01-211-0/+5
|\ | | | | | | | | | | Completely minor snmp doc conflict. Signed-off-by: David S. Miller <davem@davemloft.net>