summaryrefslogtreecommitdiffstats
path: root/net/dsa/slave.c
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setupVladimir Oltean2021-09-221-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6a52e73368038f47f6618623d75061dc263b26ae upstream. DSA supports connecting to a phy-handle, and has a fallback to a non-OF based method of connecting to an internal PHY on the switch's own MDIO bus, if no phy-handle and no fixed-link nodes were present. The -ENODEV error code from the first attempt (phylink_of_phy_connect) is what triggers the second attempt (phylink_connect_phy). However, when the first attempt returns a different error code than -ENODEV, this results in an unbalance of calls to phylink_create and phylink_destroy by the time we exit the function. The phylink instance has leaked. There are many other error codes that can be returned by phylink_of_phy_connect. For example, phylink_validate returns -EINVAL. So this is a practical issue too. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_countVladimir Oltean2021-06-031-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b94cbc909f1d80378a1f541968309e5c1178c98b ] DSA implements a bunch of 'standardized' ethtool statistics counters, namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the hardware driver returns in .get_sset_count(), we need to add 4 to that. That is ok, except that .get_sset_count() can return a negative error code, for example: b53_get_sset_count -> phy_ethtool_get_sset_count -> return -EIO -EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can imagine that certain error codes may even become positive, although based on code inspection I did not see instances of that. Check the error code first, if it is negative return it as-is. Based on a similar patch for dsa_master_get_strings from Dan Carpenter: https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/ Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: dsa: add GRO support via gro_cellsAlexander Lobakin2021-03-111-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e131a5634830047923c694b4ce0c3b31745ff01b upstream. gro_cells lib is used by different encapsulating netdevices, such as geneve, macsec, vxlan etc. to speed up decapsulated traffic processing. CPU tag is a sort of "encapsulation", and we can use the same mechs to greatly improve overall DSA performance. skbs are passed to the GRO layer after removing CPU tags, so we don't need any new packet offload types as it was firstly proposed by me in the first GRO-over-DSA variant [1]. The size of struct gro_cells is sizeof(void *), so hot struct dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields remain in one 32-byte cacheline. The other positive side effect is that drivers for network devices that can be shipped as CPU ports of DSA-driven switches can now use napi_gro_frags() to pass skbs to kernel. Packets built that way are completely non-linear and are likely being dropped without GRO. This was tested on to-be-mainlined-soon Ethernet driver that uses napi_gro_frags(), and the overall performance was on par with the variant from [1], sometimes even better due to minimal overhead. net.core.gro_normal_batch tuning may help to push it to the limit on particular setups and platforms. iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup on 1.2 GHz MIPS board: 5.7-rc2 baseline: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender [ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver Iface RX packets TX packets eth0 7097731 7097702 port0 426050 6671829 port1 6671681 425862 port1.218 6671677 425851 With this patch: [ID] Interval Transfer Bitrate Retr [ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender [ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver Iface RX packets TX packets eth0 9474792 9474777 port0 455200 353288 port1 9019592 455035 port1.218 353144 455024 v2: - Add some performance examples in the commit message; - No functional changes. [1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/ Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: declare lockless TX feature for slave portsVladimir Oltean2020-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2b86cb8299765688c5119fd18d5f436716c81010 upstream. Be there a platform with the following layout: Regular NIC | +----> DSA master for switch port | +----> DSA master for another switch port After changing DSA back to static lockdep class keys in commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this kernel splat can be seen: [ 13.361198] ============================================ [ 13.366524] WARNING: possible recursive locking detected [ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted [ 13.377874] -------------------------------------------- [ 13.383201] swapper/0/0 is trying to acquire lock: [ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.397879] [ 13.397879] but task is already holding lock: [ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.413593] [ 13.413593] other info that might help us debug this: [ 13.420140] Possible unsafe locking scenario: [ 13.420140] [ 13.426075] CPU0 [ 13.428523] ---- [ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.440924] [ 13.440924] *** DEADLOCK *** [ 13.440924] [ 13.446860] May be due to missing lock nesting notation [ 13.446860] [ 13.453668] 6 locks held by swapper/0/0: [ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400 [ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560 [ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10 [ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.512000] [ 13.512000] stack backtrace: [ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 [ 13.530421] Call trace: [ 13.532871] dump_backtrace+0x0/0x1d8 [ 13.536539] show_stack+0x24/0x30 [ 13.539862] dump_stack+0xe8/0x150 [ 13.543271] __lock_acquire+0x1030/0x1678 [ 13.547290] lock_acquire+0xf8/0x458 [ 13.550873] _raw_spin_lock+0x44/0x58 [ 13.554543] __dev_queue_xmit+0x84c/0xbe0 [ 13.558562] dev_queue_xmit+0x24/0x30 [ 13.562232] dsa_slave_xmit+0xe0/0x128 [ 13.565988] dev_hard_start_xmit+0xf4/0x448 [ 13.570182] __dev_queue_xmit+0x808/0xbe0 [ 13.574200] dev_queue_xmit+0x24/0x30 [ 13.577869] neigh_resolve_output+0x15c/0x220 [ 13.582237] ip6_finish_output2+0x244/0xb10 [ 13.586430] __ip6_finish_output+0x1dc/0x298 [ 13.590709] ip6_output+0x84/0x358 [ 13.594116] mld_sendpack+0x2bc/0x560 [ 13.597786] mld_ifc_timer_expire+0x210/0x390 [ 13.602153] call_timer_fn+0xcc/0x400 [ 13.605822] run_timer_softirq+0x588/0x6e0 [ 13.609927] __do_softirq+0x118/0x590 [ 13.613597] irq_exit+0x13c/0x148 [ 13.616918] __handle_domain_irq+0x6c/0xc0 [ 13.621023] gic_handle_irq+0x6c/0x160 [ 13.624779] el1_irq+0xbc/0x180 [ 13.627927] cpuidle_enter_state+0xb4/0x4d0 [ 13.632120] cpuidle_enter+0x3c/0x50 [ 13.635703] call_cpuidle+0x44/0x78 [ 13.639199] do_idle+0x228/0x2c8 [ 13.642433] cpu_startup_entry+0x2c/0x48 [ 13.646363] rest_init+0x1ac/0x280 [ 13.649773] arch_call_rest_init+0x14/0x1c [ 13.653878] start_kernel+0x490/0x4bc Lockdep keys themselves were added in commit ab92d68fc22f ("net: core: add generic lockdep keys"), and it's very likely that this splat existed since then, but I have no real way to check, since this stacked platform wasn't supported by mainline back then. >From Taehee's own words: This patch was considered that all stackable devices have LLTX flag. But the dsa doesn't have LLTX, so this splat happened. After this patch, dsa shares the same lockdep class key. On the nested dsa interface architecture, which you illustrated, the same lockdep class key will be used in __dev_queue_xmit() because dsa doesn't have LLTX. So that lockdep detects deadlock because the same lockdep class key is used recursively although actually the different locks are used. There are some ways to fix this problem. 1. using NETIF_F_LLTX flag. If possible, using the LLTX flag is a very clear way for it. But I'm so sorry I don't know whether the dsa could have LLTX or not. 2. using dynamic lockdep again. It means that each interface uses a separate lockdep class key. So, lockdep will not detect recursive locking. But this way has a problem that it could consume lockdep class key too many. Currently, lockdep can have 8192 lockdep class keys. - you can see this number with the following command. cat /proc/lockdep_stats lock-classes: 1251 [max: 8192] ... The [max: 8192] means that the maximum number of lockdep class keys. If too many lockdep class keys are registered, lockdep stops to work. So, using a dynamic(separated) lockdep class key should be considered carefully. In addition, updating lockdep class key routine might have to be existing. (lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key()) 3. Using lockdep subclass. A lockdep class key could have 8 subclasses. The different subclass is considered different locks by lockdep infrastructure. But "lock-classes" is not counted by subclasses. So, it could avoid stopping lockdep infrastructure by an overflow of lockdep class keys. This approach should also have an updating lockdep class key routine. (lockdep_set_subclass()) 4. Using nonvalidate lockdep class key. The lockdep infrastructure supports nonvalidate lockdep class key type. It means this lockdep is not validated by lockdep infrastructure. So, the splat will not happen but lockdep couldn't detect real deadlock case because lockdep really doesn't validate it. I think this should be used for really special cases. (lockdep_set_novalidate_class()) Further discussion here: https://patchwork.ozlabs.org/project/netdev/patch/20200503052220.4536-2-xiyou.wangcong@gmail.com/ There appears to be no negative side-effect to declaring lockless TX for the DSA virtual interfaces, which means they handle their own locking. So that's what we do to make the splat go away. Patch tested in a wide variety of cases: unicast, multicast, PTP, etc. Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Suggested-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: fix phylink_start()/phylink_stop() callsRussell King2020-03-181-6/+2
| | | | | | | | | | | | | | | [ Upstream commit 8640f8dc6d657ebfb4e67c202ad32c5457858a13 ] Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: core: add generic lockdep keysTaehee Yoo2019-10-241-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Pass ndo_setup_tc slave callback to driversVladimir Oltean2019-09-161-4/+8
| | | | | | | | | | | | | | | | | DSA currently handles shared block filters (for the classifier-action qdisc) in the core due to what I believe are simply pragmatic reasons - hiding the complexity from drivers and offerring a simple API for port mirroring. Extend the dsa_slave_setup_tc function by passing all other qdisc offloads to the driver layer, where the driver may choose what it implements and how. DSA is simply a pass-through in this case. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Advertise the VLAN offload netdev ability only if switch supports itVladimir Oltean2019-08-271-9/+6
| | | | | | | | | | | | | | | | | | | | | When adding a VLAN sub-interface on a DSA slave port, the 8021q core checks NETIF_F_HW_VLAN_CTAG_FILTER and, if the netdev is capable of filtering, calls .ndo_vlan_rx_add_vid or .ndo_vlan_rx_kill_vid to configure the VLAN offloading. DSA sets this up counter-intuitively: it always advertises this netdev feature, but the underlying driver may not actually support VLAN table manipulation. In that case, the DSA core is forced to ignore the error, because not being able to offload the VLAN is still fine - and should result in the creation of a non-accelerated VLAN sub-interface. Change this so that the netdev feature is only advertised for switch drivers that support VLAN manipulation, instead of checking for -EOPNOTSUPP at runtime. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: clear VLAN PVID flag for CPU portVivien Didelot2019-08-271-0/+6
| | | | | | | | | | | | | | | | | When the bridge offloads a VLAN on a slave port, we also need to program its dedicated CPU port as a member of the VLAN. Drivers may handle the CPU port's membership as they want. For example, Marvell as a special "Unmodified" mode to pass frames as is through such ports. Even though DSA expects the drivers to handle the CPU port membership, it does not make sense to program user VLANs as PVID on the CPU port. This patch clears this flag before programming the CPU port. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: program VLAN on CPU port from slaveVivien Didelot2019-08-271-0/+14
| | | | | | | | | | | | | | | | | | | DSA currently programs a VLAN on the CPU port implicitly after the related notifier is received by a switch. While we still need to do this transparent programmation of the DSA links in the fabric, programming the CPU port this way may cause problems in some corners such as the tag_8021q driver. Because the dedicated CPU port is specific to a slave, make their programmation explicit a few layers up, in the slave code. Note that technically, DSA links have a dedicated CPU port as well, but since they are only used as conduit between interconnected switches of a fabric, programming them transparently this way is what we want. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: check bridge VLAN in slave operationsVivien Didelot2019-08-271-0/+12
| | | | | | | | | | | | | | | The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add slave VLAN helpersVivien Didelot2019-08-271-7/+33
| | | | | | | | | | Add dsa_slave_vlan_add and dsa_slave_vlan_del helpers to handle SWITCHDEV_OBJ_ID_PORT_VLAN switchdev objects. Also copy the switchdev_obj_port_vlan structure on add since we will modify it in future patches. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: do not skip -EOPNOTSUPP in dsa_port_vid_addVivien Didelot2019-08-271-2/+5
| | | | | | | | | | | | | | Currently dsa_port_vid_add returns 0 if the switch returns -EOPNOTSUPP. This function is used in the tag_8021q.c code to offload the PVID of ports, which would simply not work if .port_vlan_add is not supported by the underlying switch. Do not skip -EOPNOTSUPP in dsa_port_vid_add but only when necessary, that is to say in dsa_slave_vlan_rx_add_vid. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: add flow_block structure and use itPablo Neira Ayuso2019-07-191-1/+1
| | | | | | | | | | | | This object stores the flow block callbacks that are attached to this block. Update flow_block_cb_lookup() to take this new object. This patch restores the block sharing feature. Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: rename tc_setup_cb_t to flow_setup_cb_tPablo Neira Ayuso2019-07-191-1/+1
| | | | | | | | Rename this type definition and adapt users. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: remove netns parameter from flow_block_cb_alloc()Pablo Neira Ayuso2019-07-191-1/+1
| | | | | | | | | | No need to annotate the netns on the flow block callback object, flow_block_cb_is_busy() already checks for used blocks. Fixes: d63db30c8537 ("net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add support for BRIDGE_MROUTER attributeVivien Didelot2019-07-091-0/+3
| | | | | | | | | | | | | | | This patch adds support for enabling or disabling the flooding of unknown multicast traffic on the CPU ports, depending on the value of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute. The current behavior is kept unchanged but a user can now prevent the CPU conduit to be flooded with a lot of unregistered traffic that the network stack needs to filter in software with e.g.: echo 0 > /sys/class/net/br0/multicast_router Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: add flow_block_cb_is_busy() and use itPablo Neira Ayuso2019-07-091-0/+3
| | | | | | | | | This patch adds a function to check if flow block callback is already in use. Call this new function from flow_block_cb_setup_simple() and from drivers. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: use flow block APIPablo Neira Ayuso2019-07-091-3/+19
| | | | | | | | | | | | | This patch updates flow_block_cb_setup_simple() to use the flow block API. Several drivers are also adjusted to use it. This patch introduces the per-driver list of flow blocks to account for blocks that are already in use. Remove tc_block_offload alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*Pablo Neira Ayuso2019-07-091-2/+2
| | | | | | | | Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and remove temporary tcf_block_binder_type alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BINDPablo Neira Ayuso2019-07-091-2/+2
| | | | | | | | Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove temporary tc_block_command alias. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: use switchdev handle helpersVivien Didelot2019-06-141-44/+32
| | | | | | | | | | | | | | | | | Get rid of the dsa_slave_switchdev_port_{attr_set,obj}_event functions in favor of the switchdev_handle_port_{attr_set,obj_add,obj_del} helpers which recurse into the lower devices of the target interface. This has the benefit of being aware of the operations made on the bridge device itself, where orig_dev is the bridge, and dev is the slave. This can be used later to configure the hardware switches. Only VLAN and (port) MDB objects not directly targeting the slave device are unsupported at the moment, so skip this case in their respective case statements. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: make dsa_slave_dev_check use constVivien Didelot2019-06-141-2/+2
| | | | | | | | | | The switchdev handle helpers make use of a device checking helper requiring a const net_device. Make dsa_slave_dev_check compliant to this. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Keep a pointer to the skb clone for TX timestampingVladimir Oltean2019-06-081-0/+3
| | | | | | | | | | | | | | For drivers that use deferred_xmit for PTP frames (such as sja1105), there is no need to perform matching between PTP frames and their egress timestamps, since the sending process can be serialized. In that case, it makes sense to have the pointer to the skb clone that DSA made directly in the skb->cb. It will be used for pushing the egress timestamp back in the application socket's error queue. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-06-071-5/+1
|\ | | | | | | | | | | | | Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <davem@davemloft.net>
| * treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | net: dsa: Move the phylink driver calls into port.cIoana Ciornei2019-05-291-95/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phylink: Add struct phylink_config to PHYLINK APIIoana Ciornei2019-05-291-13/+18
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The phylink_config structure will encapsulate a pointer to a struct device and the operation type requested for this instance of PHYLINK. This patch does not make any functional changes, it just transitions the PHYLINK internals and all its users to the new API. A pointer to a phylink_config structure will be passed to phylink_create() instead of the net_device directly. Also, the same phylink_config pointer will be passed back to all phylink_mac_ops callbacks instead of the net_device. Using this mechanism, a PHYLINK user can get the original net_device using a structure such as 'to_net_dev(config->dev)' or directly the structure containing the phylink_config using a container_of call. At the moment, only the PHYLINK_NETDEV is defined as a valid operation type for PHYLINK. In this mode, a valid reference to a struct device linked to the original net_device should be passed to PHYLINK through the phylink_config structure. This API changes is mainly driven by the necessity of adding a new operation type in PHYLINK that disconnects the phy_device from the net_device and also works when the net_device is lacking. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Initialize DSA_SKB_CB(skb)->deferred_xmit variableVladimir Oltean2019-05-121-0/+2
| | | | | | | | | | | | | | | | | | | | | The sk_buff control block can have any contents on xmit put there by the stack, so initialization is mandatory, since we are checking its value after the actual DSA xmit (the tagger may have changed it). The DSA_SKB_ZERO() macro could have been used for this purpose, but: - Zeroizing a 48-byte memory region in the hotpath is best avoided. - It would have triggered a warning with newer compilers since __dsa_skb_cb contains a structure within a structure, and the {0} initializer was incorrect for that purpose. So simply remove the DSA_SKB_ZERO() macro and initialize the deferred_xmit variable by hand (which should be done for all further dsa_skb_cb variables which need initialization - currently none - to avoid the performance penalty). Fixes: 97a69a0dea9a ("net: dsa: Add support for deferred xmit") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: support of_get_mac_address new ERR_PTR errorPetr Štetiar2019-05-071-1/+1
| | | | | | | | | | | | | | | There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Add support for deferred xmitVladimir Oltean2019-05-051-12/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/dsa: use intermediate representation for matchall offloadPieter Jansen van Vuuren2019-05-051-9/+7
| | | | | | | | | | Updates dsa hardware switch handling infrastructure to use the newer intermediate representation for flow actions in matchall offloads. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Add more convenient functions for installing port VLANsVladimir Oltean2019-04-301-21/+3
| | | | | | | | | | | | | | | | | | | | | | | | | This hides the need to perform a two-phase transaction and construct a switchdev_obj_port_vlan struct. Call graph (including a function that will be introduced in a follow-up patch) looks like this now (same for the *_vlan_del function): dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: pass switch ID through devlink_port_attrs_set()Jiri Pirko2019-04-041-0/+7
| | | | | | | | | | Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Leave ndo_get_port_parent_id implementation only for legacy. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: read mac address from DT for slave deviceXiaofei Shen2019-04-011-1/+4
| | | | | | | | | Before creating a slave netdevice, get the mac address from DTS and apply in case it is valid. Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: do not support ndo_get_phys_port_name for non-legacy portsJiri Pirko2019-03-281-0/+7
| | | | | | | | | Since each non-legacy slave has its own devlink port instance correctly set, rely on devlink core to generate correct phys port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: implement ndo_get_devlink_portJiri Pirko2019-03-281-0/+8
| | | | | | | | | | In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Avoid null pointer when failing to connect to PHYVladimir Oltean2019-03-261-4/+4
| | | | | | | | | | | | | | | When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the day by connecting to an alternative PHY, none other than a PHY on the switch's internal MDIO bus, at an address equal to the port's index. However this does not take into consideration the scenario when the switch that failed to probe an external PHY does not have an internal MDIO bus at all. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Use prepare/commit phase in dsa_slave_vlan_rx_add_vid()Florian Fainelli2019-03-031-3/+6
| | | | | | | | | | | | | | | | | | | | | | | We were skipping the prepare phase which causes some problems with at least a couple of drivers: - mv88e6xxx chooses to skip programming VID = 0 with -EOPNOTSUPP in the prepare phase, but we would still try to force this VID since we would only call the commit phase and so we would get the driver to return -EINVAL instead - qca8k does not currently have a port_vlan_add() callback implemented, yet we would try to call that unconditionally leading to a NPD Fix both issues by conforming to the current model doing a prepare/commit phase, this makes us consistent throughout the code and assumptions. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Michal Vokáč <michal.vokac@ysoft.com> Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove switchdev_opsFlorian Fainelli2019-02-271-5/+0
| | | | | | | | | | | Now that we have converted all possible callers to using a switchdev notifier for attributes we do not have a need for implementing switchdev_ops anymore, and this can be removed from all drivers the net_device structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Handle SWITCHDEV_PORT_ATTR_SETFlorian Fainelli2019-02-271-0/+18
| | | | | | | | | | | | | Following patches will change the way we communicate setting a port's attribute and use notifiers towards that goal. Prepare DSA to support receiving notifier events targeting SWITCHDEV_PORT_ATTR_SET from both atomic and process context and use a small helper to translate the event notifier into something that dsa_slave_port_attr_set() can process. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dsa: Remove phydev parameter from disable_port callAndrew Lunn2019-02-241-1/+1
| | | | | | | | No current DSA driver makes use of the phydev parameter passed to the disable_port call. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementationFlorian Fainelli2019-02-221-1/+70
| | | | | | | | | | | | | | | | | | | | | | | | In order to properly support VLAN filtering being enabled/disabled on a bridge, while having other ports being non bridge port members, we need to support the ndo_vlan_rx_{add,kill}_vid callbacks in order to make sure the non-bridge ports can continue receiving VLAN tags, even when the switch is globally configured to do ingress/egress VID checking. Since we can call dsa_port_vlan_{add,del} with a bridge_dev pointer NULL, we now need to check that in these two functions. We specifically deal with two possibly problematic cases: - creating a bridge VLAN entry while there is an existing VLAN device claiming that same VID - creating a VLAN device while there is an existing bridge VLAN entry with that VID Those are both resolved with returning -EBUSY back to user-space. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Deny enslaving VLAN devices into VLAN aware bridgeFlorian Fainelli2019-02-221-3/+36
| | | | | | | | | | | | VLAN devices on top of a DSA network device which is already part of a bridge and with said bridge being VLAN aware should not be allowed to be enslaved into that bridge. For one, this duplicates functionality offered by the VLAN aware bridge which supports tagged and untagged VLAN frames processing and it would make things needlessly complex to e.g.: propagate FDB/MDB accordingly. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Get rid of switchdev_port_attr_get()Florian Fainelli2019-02-211-7/+0
| | | | | | | | | | | | | | With the bridge no longer calling switchdev_port_attr_get() to obtain the supported bridge port flags from a driver but instead trying to set the bridge port flags directly and relying on driver to reject unsupported configurations, we can effectively get rid of switchdev_port_attr_get() entirely since this was the only place where it was called. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORTFlorian Fainelli2019-02-211-15/+1
| | | | | | | | | | | | Now that we have converted the bridge code and the drivers to check for bridge port(s) flags at the time we try to set them, there is no need for a get() -> set() sequence anymore and SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT therefore becomes unused. Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGSFlorian Fainelli2019-02-211-0/+4
| | | | | | | | | | | | | In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: add support for bridge flagsRussell King2019-02-211-0/+9
| | | | | | | | | | | | | The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-02-081-7/+10
|\ | | | | | | | | | | | | | | | | | | An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: Fix NULL checking in dsa_slave_set_eee()Dan Carpenter2019-02-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | This function can't succeed if dp->pl is NULL. It will Oops inside the call to return phylink_ethtool_get_eee(dp->pl, e); Fixes: 1be52e97ed3e ("dsa: slave: eee: Allow ports to use phylink") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-13 03:28:34 +0000