summaryrefslogtreecommitdiffstats
path: root/net/ipv4
Commit message (Collapse)AuthorAgeFilesLines
* net: Make tcp_allowed_congestion_control readonly in non-init netnsJonathon Reinhart2021-04-131-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, tcp_allowed_congestion_control is global and writable; writing to it in any net namespace will leak into all other net namespaces. tcp_available_congestion_control and tcp_allowed_congestion_control are the only sysctls in ipv4_net_table (the per-netns sysctl table) with a NULL data pointer; their handlers (proc_tcp_available_congestion_control and proc_allowed_congestion_control) have no other way of referencing a struct net. Thus, they operate globally. Because ipv4_net_table does not use designated initializers, there is no easy way to fix up this one "bad" table entry. However, the data pointer updating logic shouldn't be applied to NULL pointers anyway, so we instead force these entries to be read-only. These sysctls used to exist in ipv4_table (init-net only), but they were moved to the per-net ipv4_net_table, presumably without realizing that tcp_allowed_congestion_control was writable and thus introduced a leak. Because the intent of that commit was only to know (i.e. read) "which congestion algorithms are available or allowed", this read-only solution should be sufficient. The logic added in recent commit 31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls") does not and cannot check for NULL data pointers, because other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have .data=NULL but use other methods (.extra2) to access the struct net. Fixes: 9cb8e048e5d9 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns") Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2021-04-123-3/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix NAT IPv6 offload in the flowtable. 2) icmpv6 is printed as unknown in /proc/net/nf_conntrack. 3) Use div64_u64() in nft_limit, from Eric Dumazet. 4) Use pre_exit to unregister ebtables and arptables hooks, from Florian Westphal. 5) Fix out-of-bound memset in x_tables compat match/target, also from Florian. 6) Clone set elements expression to ensure proper initialization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: x_tables: fix compat match/target pad out-of-bound writeFlorian Westphal2021-04-132-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | xt_compat_match/target_from_user doesn't check that zeroing the area to start of next rule won't write past end of allocated ruleset blob. Remove this code and zero the entire blob beforehand. Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com Reported-by: Andy Nguyen <theflow@google.com> Fixes: 9fa492cdc160c ("[NETFILTER]: x_tables: simplify compat API") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: arp_tables: add pre_exit hook for table unregisterFlorian Westphal2021-04-102-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Same problem that also existed in iptables/ip(6)tables, when arptable_filter is removed there is no longer a wait period before the table/ruleset is free'd. Unregister the hook in pre_exit, then remove the table in the exit function. This used to work correctly because the old nf_hook_unregister API did unconditional synchronize_net. The per-net hook unregister function uses call_rcu instead. Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | ipv6: report errors for iftoken via netlink extackStephen Hemminger2021-04-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting iftoken can fail for several different reasons but there and there was no report to user as to the cause. Add netlink extended errors to the processing of the request. This requires adding additional argument through rtnl_af_ops set_link_af callback. Reported-by: Hongren Zheng <li@zenithal.me> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: udp: Add support for getsockopt(..., ..., UDP_GRO, ..., ...);Norman Maurer2021-04-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Support for UDP_GRO was added in the past but the implementation for getsockopt was missed which did lead to an error when we tried to retrieve the setting for UDP_GRO. This patch adds the missing switch case for UDP_GRO Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Norman Maurer <norman_maurer@apple.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2021-03-314-7/+20
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-03-31 1) Fix ipv4 pmtu checks for xfrm anf vti interfaces. From Eyal Birger. 2) There are situations where the socket passed to xfrm_output_resume() is not the same as the one attached to the skb. Use the socket passed to xfrm_output_resume() to avoid lookup failures when xfrm is used with VRFs. From Evan Nimmo. 3) Make the xfrm_state_hash_generation sequence counter per network namespace because but its write serialization lock is also per network namespace. Write protection is insufficient otherwise. From Ahmed S. Darwish. 4) Fixup sctp featue flags when used with esp offload. From Xin Long. 5) xfrm BEET mode doesn't support fragments for inner packets. This is a limitation of the protocol, so no fix possible. Warn at least to notify the user about that situation. From Xin Long. 6) Fix NULL pointer dereference on policy lookup when namespaces are uses in combination with esp offload. 7) Fix incorrect transformation on esp offload when packets get segmented at layer 3. 8) Fix some user triggered usages of WARN_ONCE in the xfrm compat layer. From Dmitry Safonov. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * xfrm: Provide private skb extensions for segmented and hw offloaded ESP packetsSteffen Klassert2021-03-291-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer insertion on HW offload. This flag is set on the secpath that is shared amongst segments. This lead to a situation where some segments are not transformed correctly when segmentation happens at layer 3. Fix this by using private skb extensions for segmented and hw offloaded ESP packets. Fixes: 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
| * esp: delete NETIF_F_SCTP_CRC bit from features for esp offloadXin Long2021-03-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now in esp4/6_gso_segment(), before calling inner proto .gso_segment, NETIF_F_CSUM_MASK bits are deleted, as HW won't be able to do the csum for inner proto due to the packet encrypted already. So the UDP/TCP packet has to do the checksum on its own .gso_segment. But SCTP is using CRC checksum, and for that NETIF_F_SCTP_CRC should be deleted to make SCTP do the csum in own .gso_segment as well. In Xiumei's testing with SCTP over IPsec/veth, the packets are kept dropping due to the wrong CRC checksum. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
| * xfrm: Use actual socket sk instead of skb socket for xfrm_output_resumeEvan Nimmo2021-03-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A situation can occur where the interface bound to the sk is different to the interface bound to the sk attached to the skb. The interface bound to the sk is the correct one however this information is lost inside xfrm_output2 and instead the sk on the skb is used in xfrm_output_resume instead. This assumes that the sk bound interface and the bound interface attached to the sk within the skb are the same which can lead to lookup failures inside ip_route_me_harder resulting in the packet being dropped. We have an l2tp v3 tunnel with ipsec protection. The tunnel is in the global VRF however we have an encapsulated dot1q tunnel interface that is within a different VRF. We also have a mangle rule that marks the packets causing them to be processed inside ip_route_me_harder. Prior to commit 31c70d5956fc ("l2tp: keep original skb ownership") this worked fine as the sk attached to the skb was changed from the dot1q encapsulated interface to the sk for the tunnel which meant the interface bound to the sk and the interface bound to the skb were identical. Commit 46d6c5ae953c ("netfilter: use actual socket sk rather than skb sk when routing harder") fixed some of these issues however a similar problem existed in the xfrm code. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
| * vti: fix ipv4 pmtu check to honor ip header dfEyal Birger2021-03-031-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Frag needed should only be sent if the header enables DF. This fix allows packets larger than MTU to pass the vti interface and be fragmented after encapsulation, aligning behavior with non-vti xfrm. Fixes: d6af1a31cc72 ("vti: Add pmtu handling to vti_xmit.") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* | net: ipconfig: ic_dev can be NULL in ic_close_devsVladimir Oltean2021-03-221-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ic_close_dev contains a generalization of the logic to not close a network interface if it's the host port for a DSA switch. This logic is disguised behind an iteration through the lowers of ic_dev in ic_close_dev. When no interface for ipconfig can be found, ic_dev is NULL, and ic_close_dev: - dereferences a NULL pointer when assigning selected_dev - would attempt to search through the lower interfaces of a NULL net_device pointer So we should protect against that case. The "lower_dev" iterator variable was shortened to "lower" in order to keep the 80 character limit. Fixes: f68cbaed67cb ("net: ipconfig: avoid use-after-free in ic_close_devs") Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2021-03-182-16/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Several patches to testore use of memory barriers instead of RCU to ensure consistent access to ruleset, from Mark Tomlinson. 2) Fix dump of expectation via ctnetlink, from Florian Westphal. 3) GRE helper works for IPv6, from Ludovic Senecaux. 4) Set error on unsupported flowtable flags. 5) Use delayed instead of deferrable workqueue in the flowtable, from Yinjun Zhang. 6) Fix spurious EEXIST in case of add-after-delete flowtable in the same batch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Revert "netfilter: x_tables: Switch synchronization to RCU"Mark Tomlinson2021-03-152-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit cc00bcaa589914096edef7fb87ca5cee4a166b5c. This (and the preceding) patch basically re-implemented the RCU mechanisms of patch 784544739a25. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Prior to using RCU a script calling "iptables" approx. 200 times was taking 1.16s. With RCU this increased to 11.59s. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | Revert "netfilter: x_tables: Update remaining dereference to RCU"Mark Tomlinson2021-03-152-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 443d6e86f821a165fae3fc3fc13086d27ac140b1. This (and the following) patch basically re-implemented the RCU mechanisms of patch 784544739a25. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | tcp: relookup sock for RST+ACK packets handled by obsolete req sockAlexander Ovechkin2021-03-152-4/+10
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently tcp_check_req can be called with obsolete req socket for which big socket have been already created (because of CPU race or early demux assigning req socket to multiple packets in gro batch). Commit e0f9759f530bf789e984 ("tcp: try to keep packet if SYN_RCV race is lost") added retry in case when tcp_check_req is called for PSH|ACK packet. But if client sends RST+ACK immediatly after connection being established (it is performing healthcheck, for example) retry does not occur. In that case tcp_check_req tries to close req socket, leaving big socket active. Fixes: e0f9759f530 ("tcp: try to keep packet if SYN_RCV race is lost") Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Reported-by: Oleg Senin <olegsenin@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Consolidate common blackhole dst opsDaniel Borkmann2021-03-101-37/+8
| | | | | | | | | | | | | | | | | | | | Move generic blackhole dst ops to the core and use them from both ipv4_dst_blackhole_ops and ip6_dst_blackhole_ops where possible. No functional change otherwise. We need these also in other locations and having to define them over and over again is not great. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2021-03-097-44/+39
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau. 2) TX skb error handling fix in mt76 driver, also from Felix. 3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman. 4) Avoid double free of percpu pointers when freeing a cloned bpf prog. From Cong Wang. 5) Use correct printf format for dma_addr_t in ath11k, from Geert Uytterhoeven. 6) Fix resolve_btfids build with older toolchains, from Kun-Chuan Hsieh. 7) Don't report truncated frames to mac80211 in mt76 driver, from Lorenzop Bianconi. 8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang. 9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann. 10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from Arjun Roy. 11) Ignore routes with deleted nexthop object in mlxsw, from Ido Schimmel. 12) Need to undo tcp early demux lookup sometimes in nf_nat, from Florian Westphal. 13) Fix gro aggregation for udp encaps with zero csum, from Daniel Borkmann. 14) Make sure to always use imp*_ndo_send when necessaey, from Jason A. Donenfeld. 15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov. 16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin. 17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir Oltean. 18) Make sure textsearch copntrol block is large enough, from Wilem de Bruijn. 19) Revert MAC changes to r8152 leading to instability, from Hates Wang. 20) Advance iov in 9p even for empty reads, from Jissheng Zhang. 21) Double hook unregister in nftables, from PabloNeira Ayuso. 22) Fix memleak in ixgbe, fropm Dinghao Liu. 23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne. 24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang Tang. 25) Fix DOI refcount bugs in cipso, from Paul Moore. 26) One too many irqsave in ibmvnic, from Junlin Yang. 27) Fix infinite loop with MPLS gso segmenting via virtio_net, from Balazs Nemeth. * git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits) s390/qeth: fix notification for pending buffers during teardown s390/qeth: schedule TX NAPI on QAOB completion s390/qeth: improve completion of pending TX buffers s390/qeth: fix memory leak after failed TX Buffer allocation net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0 net: check if protocol extracted by virtio_net_hdr_set_proto is correct net: dsa: xrs700x: check if partner is same as port in hsr join net: lapbether: Remove netif_start_queue / netif_stop_queue atm: idt77252: fix null-ptr-dereference atm: uPD98402: fix incorrect allocation atm: fix a typo in the struct description net: qrtr: fix error return code of qrtr_sendmsg() mptcp: fix length of ADD_ADDR with port sub-option net: bonding: fix error return code of bond_neigh_init() net: enetc: allow hardware timestamping on TX queues with tc-etf enabled net: enetc: set MAC RX FIFO to recommended value net: davicom: Use platform_get_irq_optional() net: davicom: Fix regulator not turned off on driver removal net: davicom: Fix regulator not turned off on failed probe net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports ...
| * | CIPSO: Fix unaligned memory access in cipso_v4_gentag_hdrSergey Nazarov2021-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to use put_unaligned when writing 32-bit DOI value in cipso_v4_gentag_hdr to avoid unaligned memory access. v2: unneeded type cast removed as Ondrej Mosnacek suggested. Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cipso,calipso: resolve a number of problems with the DOI refcountsPaul Moore2021-03-041-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current CIPSO and CALIPSO refcounting scheme for the DOI definitions is a bit flawed in that we: 1. Don't correctly match gets/puts in netlbl_cipsov4_list(). 2. Decrement the refcount on each attempt to remove the DOI from the DOI list, only removing it from the list once the refcount drops to zero. This patch fixes these problems by adding the missing "puts" to netlbl_cipsov4_list() and introduces a more conventional, i.e. not-buggy, refcounting mechanism to the DOI definitions. Upon the addition of a DOI to the DOI list, it is initialized with a refcount of one, removing a DOI from the list removes it from the list and drops the refcount by one; "gets" and "puts" behave as expected with respect to refcounts, increasing and decreasing the DOI's refcount by one. Fixes: b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Fixes: d7cce01504a0 ("netlabel: Add support for removing a CALIPSO DOI.") Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | nexthop: Do not flush blackhole nexthops when loopback goes downIdo Schimmel2021-03-041-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As far as user space is concerned, blackhole nexthops do not have a nexthop device and therefore should not be affected by the administrative or carrier state of any netdev. However, when the loopback netdev goes down all the blackhole nexthops are flushed. This happens because internally the kernel associates blackhole nexthops with the loopback netdev. This behavior is both confusing to those not familiar with kernel internals and also diverges from the legacy API where blackhole IPv4 routes are not flushed when the loopback netdev goes down: # ip route add blackhole 198.51.100.0/24 # ip link set dev lo down # ip route show 198.51.100.0/24 blackhole 198.51.100.0/24 Blackhole IPv6 routes are flushed, but at least user space knows that they are associated with the loopback netdev: # ip -6 route show 2001:db8:1::/64 blackhole 2001:db8:1::/64 dev lo metric 1024 pref medium Fix this by only flushing blackhole nexthops when the loopback netdev is unregistered. Fixes: ab84be7e54fc ("net: Initial nexthop code") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Donald Sharp <sharpd@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: add sanity tests to TCP_QUEUE_SEQEric Dumazet2021-03-011-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qingyu Li reported a syzkaller bug where the repro changes RCV SEQ _after_ restoring data in the receive queue. mprotect(0x4aa000, 12288, PROT_READ) = 0 mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000 mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000 socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0 sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0 setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0 recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer) syslog shows: [ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0 [ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0 This should not be allowed. TCP_QUEUE_SEQ should only be used when queues are empty. This patch fixes this case, and the tx path as well. Fixes: ee9952831cfd ("tcp: Initial repair mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=212005 Reported-by: Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | inetpeer: use div64_ul() and clamp_val() calculate inet_peer_thresholdYejune Deng2021-03-011-14/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In inet_initpeers(), struct inet_peer on IA32 uses 128 bytes in nowdays. Get rid of the cascade and use div64_ul() and clamp_val() calculate that will not need to be adjusted in the future as suggested by Eric Dumazet. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: always use icmp{,v6}_ndo_send from ndo_start_xmitJason A. Donenfeld2021-03-012-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were a few remaining tunnel drivers that didn't receive the prior conversion to icmp{,v6}_ndo_send. Knowing now that this could lead to memory corrution (see ee576c47db60 ("net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending") for details), there's even more imperative to have these all converted. So this commit goes through the remaining cases that I could find and does a boring translation to the ndo variety. The Fixes: line below is the merge that originally added icmp{,v6}_ ndo_send and converted the first batch of icmp{,v6}_send users. The rationale then for the change applies equally to this patch. It's just that these drivers were left out of the initial conversion because these network devices are hiding in net/ rather than in drivers/net/. Cc: Florian Westphal <fw@strlen.de> Cc: Willem de Bruijn <willemb@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 803381f9f117 ("Merge branch 'icmp-account-for-NAT-when-sending-icmps-from-ndo-layer'") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: Fix gro aggregation for udp encaps with zero csumDaniel Borkmann2021-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff4bd92 ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff4bd92 ("udp: additional GRO support") Fixes: 662880f44203 ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | tcp: Fix sign comparison bug in getsockopt(TCP_ZEROCOPY_RECEIVE)Arjun Roy2021-02-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a user-provided "len" field of type signed int, and then compare the value to the result of an "offsetofend" operation, which is unsigned. Negative values provided by the user will be promoted to large positive numbers; thus checking that len < offsetofend() will return false when the intention was that it return true. Note that while len is originally checked for negative values earlier on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the value from userspace which may have changed in the meantime. Therefore, re-add the check for negative values after the call to get_user in the handler code for TCP_ZEROCOPY_RECEIVE. Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Arjun Roy <arjunroy@google.com> Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds2021-02-271-1/+0
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
| * | net: remove cmsg restriction from io_uring based send/recvmsg callsJens Axboe2021-02-231-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | No need to restrict these anymore, as the worker threads are direct clones of the original task. Hence we know for a fact that we can support anything that the regular task can. Since the only user of proto_ops->flags was to flag PROTO_CMSG_DATA_ONLY, kill the member and the flag definition too. Signed-off-by: Jens Axboe <axboe@kernel.dk>
* / net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sendingJason A. Donenfeld2021-02-231-2/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2021-02-164-11/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf-next 2021-02-16 The following pull-request contains BPF updates for your *net-next* tree. There's a small merge conflict between 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") from net-next tree and 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows: [...] lock_sock(sk); err = tcp_zerocopy_receive(sk, &zc, &tss); err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname, &zc, &len, err); release_sock(sk); [...] We've added 116 non-merge commits during the last 27 day(s) which contain a total of 156 files changed, 5662 insertions(+), 1489 deletions(-). The main changes are: 1) Adds support of pointers to types with known size among global function args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov. 2) Add bpf_iter for task_vma which can be used to generate information similar to /proc/pid/maps, from Song Liu. 3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow rewriting bind user ports from BPF side below the ip_unprivileged_port_start range, both from Stanislav Fomichev. 4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map as well as per-cpu maps for the latter, from Alexei Starovoitov. 5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer for sleepable programs, both from KP Singh. 6) Extend verifier to enable variable offset read/write access to the BPF program stack, from Andrei Matei. 7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to query device MTU from programs, from Jesper Dangaard Brouer. 8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF tracing programs, from Florent Revest. 9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when otherwise too many passes are required, from Gary Lin. 10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function verification both related to zero-extension handling, from Ilya Leoshkevich. 11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa. 12) Batch of AF_XDP selftest cleanups and small performance improvement for libbpf's xsk map redirect for newer kernels, from Björn Töpel. 13) Follow-up BPF doc and verifier improvements around atomics with BPF_FETCH, from Brendan Jackman. 14) Permit zero-sized data sections e.g. if ELF .rodata section contains read-only data from local variables, from Yonghong Song. 15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * bpf: Allow rewriting to ports under ip_unprivileged_port_startStanislav Fomichev2021-01-271-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port to the privileged ones (< ip_unprivileged_port_start), but it will be rejected later on in the __inet_bind or __inet6_bind. Let's add another return value to indicate that CAP_NET_BIND_SERVICE check should be ignored. Use the same idea as we currently use in cgroup/egress where bit #1 indicates CN. Instead, for cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should be bypassed. v5: - rename flags to be less confusing (Andrey Ignatov) - rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags and accept BPF_RET_SET_CN (no behavioral changes) v4: - Add missing IPv6 support (Martin KaFai Lau) v3: - Update description (Martin KaFai Lau) - Fix capability restore in selftest (Martin KaFai Lau) v2: - Switch to explicit return code (Martin KaFai Lau) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
| * bpf: Split cgroup_bpf_enabled per attach typeStanislav Fomichev2021-01-202-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we attach any cgroup hook, the rest (even if unused/unattached) start to contribute small overhead. In particular, the one we want to avoid is __cgroup_bpf_run_filter_skb which does two redirections to get to the cgroup and pushes/pulls skb. Let's split cgroup_bpf_enabled to be per-attach to make sure only used attach types trigger. I've dropped some existing high-level cgroup_bpf_enabled in some places because BPF_PROG_CGROUP_XXX_RUN macros usually have another cgroup_bpf_enabled check. I also had to copy-paste BPF_CGROUP_RUN_SA_PROG_LOCK for GETPEERNAME/GETSOCKNAME because type for cgroup_bpf_enabled[type] has to be constant and known at compile time. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210115163501.805133-4-sdf@google.com
| * bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVEStanislav Fomichev2021-01-202-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE. We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom call in do_tcp_getsockopt using the on-stack data. This removes 3% overhead for locking/unlocking the socket. Without this patch: 3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt | --3.30%--__cgroup_bpf_run_filter_getsockopt | --0.81%--__kmalloc With the patch applied: 0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern Note, exporting uapi/tcp.h requires removing netinet/tcp.h from test_progs.h because those headers have confliciting definitions. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
* | tcp: tcp_data_ready() must look at SOCK_DONEEric Dumazet2021-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | My prior cleanup missed that tcp_data_ready() has to look at SOCK_DONE. Otherwise, an application using SO_RCVLOWAT will not get EPOLLIN event if a FIN is received in the middle of expected payload. The reason SOCK_DONE is not examined in tcp_epollin_ready() is that tcp_poll() catches the FIN because tcp_fin() is also setting RCV_SHUTDOWN into sk->sk_shutdown Fixes: 05dc72aba364 ("tcp: factorize logic into tcp_epollin_ready()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Arjun Roy <arjunroy@google.com> Reviewed-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: factorize logic into tcp_epollin_ready()Eric Dumazet2021-02-122-22/+7
| | | | | | | | | | | | | | | | | | | | | | Both tcp_data_ready() and tcp_stream_is_readable() share the same logic. Add tcp_epollin_ready() helper to avoid duplication. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: Sanitize CMSG flags and reserved args in tcp_zerocopy_receive.Arjun Roy2021-02-111-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicitly define reserved field and require it and any subsequent fields to be zero-valued for now. Additionally, limit the valid CMSG flags that tcp_zerocopy_receive accepts. Fixes: 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Suggested-by: David Ahern <dsahern@gmail.com> Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ipconfig: avoid use-after-free in ic_close_devsVladimir Oltean2021-02-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the fact that ic_dev->dev is kept open in ic_close_dev, I had thought that ic_dev will not be freed either. But that is not the case, but instead "everybody dies" when ipconfig cleans up, and just the net_device behind ic_dev->dev remains allocated but not ic_dev itself. This is a problem because in ic_close_devs, for every net device that we're about to close, we compare it against the list of lower interfaces of ic_dev, to figure out whether we should close it or not. But since ic_dev itself is subject to freeing, this means that at some point in the middle of the list of ipconfig interfaces, ic_dev will have been freed, and we would be still attempting to iterate through its list of lower interfaces while checking whether to bring down the remaining ipconfig interfaces. There are multiple ways to avoid the use-after-free: we could delay freeing ic_dev until the very end (outside the while loop). Or an even simpler one: we can observe that we don't need ic_dev when iterating through its lowers, only ic_dev->dev, structure which isn't ever freed. So, by keeping ic_dev->dev in a variable assigned prior to freeing ic_dev, we can avoid all use-after-free issues. Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: add some entropy in __inet_hash_connect()Eric Dumazet2021-02-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash Port Selection Algorithm), a patient attacker could still be able to collect enough state from an otherwise idle host. Idea of this patch is to inject some noise, in the cases __inet_hash_connect() found a candidate in the first attempt. This noise should not significantly reduce the collision avoidance, and should be zero if connection table is already well used. Note that this is not implementing RFC 6056 3.3.5 because we think Algorithm 5 could hurt typical workloads. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: change source port randomizarion at connect() timeEric Dumazet2021-02-111-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC 6056 (Recommendations for Transport-Protocol Port Randomization) provides good summary of why source selection needs extra care. David Dworken reminded us that linux implements Algorithm 3 as described in RFC 6056 3.3.3 Quoting David : In the context of the web, this creates an interesting info leak where websites can count how many TCP connections a user's computer is establishing over time. For example, this allows a website to count exactly how many subresources a third party website loaded. This also allows: - Distinguishing between different users behind a VPN based on distinct source port ranges. - Tracking users over time across multiple networks. - Covert communication channels between different browsers/browser profiles running on the same computer - Tracking what applications are running on a computer based on the pattern of how fast source ports are getting incremented. Section 3.3.4 describes an enhancement, that reduces attackers ability to use the basic information currently stored into the shared 'u32 hint'. This change also decreases collision rate when multiple applications need to connect() to different destinations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵David S. Miller2021-02-091-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-02-09 1) Support TSO on xfrm interfaces. From Eyal Birger. 2) Variable calculation simplifications in esp4/esp6. From Jiapeng Chong / Jiapeng Zhong. 3) Fix a return code in xfrm_do_migrate. From Zheng Yongjun. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: Simplify the calculation of variablesJiapeng Zhong2021-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following coccicheck warnings: ./net/ipv4/esp4_offload.c:288:32-34: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* | | IPv4: Extend 'fib_notify_on_flag_change' sysctlAmit Cohen2021-02-082-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the value '2' to 'fib_notify_on_flag_change' to allow sending notifications only for failed route installation. Separate value is added for such notifications because there are less of them, so they do not impact performance and some users will find them more important. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | IPv4: Add "offload failed" indication to routesAmit Cohen2021-02-084-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. To avoid such cases, previous patch set added the ability to emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed, this behavior is controlled by sysctl. With the above mentioned behavior, it is possible to know from user-space if the route was offloaded, but if the offload fails there is no indication to user-space. Following a failure, a routing daemon will wait indefinitely for a notification that will never come. This patch adds an "offload_failed" indication to IPv4 routes, so that users will have better visibility into the offload process. 'struct fib_alias', and 'struct fib_rt_info' are extended with new field that indicates if route offload failed. Note that the new field is added using unused bit and therefore there is no need to increase structs size. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski2021-02-061-9/+9
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Remove indirection and use nf_ct_get() instead from nfnetlink_log and nfnetlink_queue, from Florian Westphal. 2) Add weighted random twos choice least-connection scheduling for IPVS, from Darby Payne. 3) Add a __hash placeholder in the flow tuple structure to identify the field to be included in the rhashtable key hash calculation. 4) Add a new nft_parse_register_load() and nft_parse_register_store() to consolidate register load and store in the core. 5) Statify nft_parse_register() since it has no more module clients. 6) Remove redundant assignment in nft_cmp, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: netfilter: nftables: remove redundant assignment of variable err netfilter: nftables: statify nft_parse_register() netfilter: nftables: add nft_parse_register_store() and use it netfilter: nftables: add nft_parse_register_load() and use it netfilter: flowtable: add hash offset field to tuple ipvs: add weighted random twos choice algorithm netfilter: ctnetlink: remove get_ct indirection ==================== Link: https://lore.kernel.org/r/20210206015005.23037-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | | netfilter: nftables: add nft_parse_register_load() and use itPablo Neira Ayuso2021-01-271-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | | Revert "net: ipv4: handle DSA enabled master network devices"Vladimir Oltean2021-02-061-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 728c02089a0e3eefb02e9927bfae50490f40e72e. Since 2015 DSA has gained more integration with the network stack, we can now have the same functionality without explicitly open-coding for it: - It now opens the DSA master netdevice automatically whenever a user netdevice is opened. - The master and switch interfaces are coupled in an upper/lower hierarchy using the netdev adjacency lists. In the nfsroot example below, the interface chosen by autoconfig was swp3, and every interface except that and the DSA master, eth1, was brought down afterwards: [ 8.714215] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 8.978041] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 9.246134] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 9.486203] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 9.512827] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 9.521047] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off [ 9.530382] device eth1 entered promiscuous mode [ 9.535452] DSA: tree 0 setup [ 9.539777] printk: console [netcon0] enabled [ 9.544504] netconsole: network logging started [ 9.555047] fsl_enetc 0000:00:00.2 eth1: configuring for fixed/internal link mode [ 9.562790] fsl_enetc 0000:00:00.2 eth1: Link is Up - 1Gbps/Full - flow control off [ 9.564661] 8021q: adding VLAN 0 to HW filter on device bond0 [ 9.637681] fsl_enetc 0000:00:00.0 eth0: PHY [0000:00:00.0:02] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL) [ 9.655679] fsl_enetc 0000:00:00.0 eth0: configuring for inband/sgmii link mode [ 9.666611] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 9.676216] 8021q: adding VLAN 0 to HW filter on device swp0 [ 9.682086] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 9.690700] 8021q: adding VLAN 0 to HW filter on device swp1 [ 9.696538] mscc_felix 0000:00:00.5 swp2: configuring for inband/qsgmii link mode [ 9.705131] 8021q: adding VLAN 0 to HW filter on device swp2 [ 9.710964] mscc_felix 0000:00:00.5 swp3: configuring for inband/qsgmii link mode [ 9.719548] 8021q: adding VLAN 0 to HW filter on device swp3 [ 9.747811] Sending DHCP requests .. [ 12.742899] mscc_felix 0000:00:00.5 swp1: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.743828] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off [ 12.747062] IPv6: ADDRCONF(NETDEV_CHANGE): swp1: link becomes ready [ 12.755216] fsl_enetc 0000:00:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.766603] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready [ 12.783188] mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.785354] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.799535] IPv6: ADDRCONF(NETDEV_CHANGE): swp2: link becomes ready [ 13.803141] mscc_felix 0000:00:00.5 swp3: Link is Up - 1Gbps/Full - flow control rx/tx [ 13.811646] IPv6: ADDRCONF(NETDEV_CHANGE): swp3: link becomes ready [ 15.452018] ., OK [ 15.470336] IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.39 [ 15.477887] IP-Config: Complete: [ 15.481330] device=swp3, hwaddr=00:04:9f:05:de:0a, ipaddr=10.0.0.39, mask=255.255.255.0, gw=10.0.0.1 [ 15.491846] host=10.0.0.39, domain=(none), nis-domain=(none) [ 15.498429] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= [ 15.498481] nameserver0=8.8.8.8 [ 15.627542] fsl_enetc 0000:00:00.0 eth0: Link is Down [ 15.690903] mscc_felix 0000:00:00.5 swp0: Link is Down [ 15.745216] mscc_felix 0000:00:00.5 swp1: Link is Down [ 15.800498] mscc_felix 0000:00:00.5 swp2: Link is Down Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | | udp: call udp_encap_enable for v6 sockets when enabling encapXin Long2021-02-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive(). This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock(). v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch. Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | | net: fix building errors on powerpc when CONFIG_RETPOLINE is not setBrian Vazquez2021-02-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes the errores reported when building for powerpc: ERROR: modpost: "ip6_dst_check" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ipv4_dst_check" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ipv4_mtu" [vmlinux] is a static EXPORT_SYMBOL ERROR: modpost: "ip6_mtu" [vmlinux] is a static EXPORT_SYMBOL Fixes: f67fbeaebdc0 ("net: use indirect call helpers for dst_mtu") Fixes: bbd807dfbf20 ("net: indirect call helpers for ipv4/ipv6 dst_check functions") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Brian Vazquez <brianvv@google.com> Link: https://lore.kernel.org/r/20210204181839.558951-2-brianvv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | | net: indirect call helpers for ipv4/ipv6 dst_check functionsBrian Vazquez2021-02-032-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch avoids the indirect call for the common case: ip6_dst_check and ipv4_dst_check Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | | net: use indirect call helpers for dst_mtuBrian Vazquez2021-02-031-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch avoids the indirect call for the common case: ip6_mtu and ipv4_mtu Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-04 13:43:35 +0000