summaryrefslogtreecommitdiffstats
path: root/net/ipv6
Commit message (Collapse)AuthorAgeFilesLines
* ipv6: fix reachability confirmation with proxy_ndpGergely Risko2023-02-011-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 9f535c870e493841ac7be390610ff2edec755762 upstream. When proxying IPv6 NDP requests, the adverts to the initial multicast solicits are correct and working. On the other hand, when later a reachability confirmation is requested (on unicast), no reply is sent. This causes the neighbor entry expiring on the sending node, which is mostly a non-issue, as a new multicast request is sent. There are routers, where the multicast requests are intentionally delayed, and in these environments the current implementation causes periodic packet loss for the proxied endpoints. The root cause is the erroneous decrease of the hop limit, as this is checked in ndisc.c and no answer is generated when it's 254 instead of the correct 255. Cc: stable@vger.kernel.org Fixes: 46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()") Signed-off-by: Gergely Risko <gergely.risko@gmail.com> Tested-by: Gergely Risko <gergely.risko@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: raw: Deduct extension header length in rawv6_push_pending_framesHerbert Xu2023-01-181-0/+4
| | | | | | | | | | | | | | commit cb3e9864cdbe35ff6378966660edbcbac955fe17 upstream. The total cork length created by ip6_append_data includes extension headers, so we must exclude them when comparing them against the IPV6_CHECKSUM offset which does not include extension headers. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6/sit: use DEV_STATS_INC() to avoid data-racesEric Dumazet2022-12-311-11/+11
| | | | | | | | | | | | | | | | | [ Upstream commit cb34b7cf17ecf33499c9298943f85af247abc1e9 ] syzbot/KCSAN reported that multiple cpus are updating dev->stats.tx_error concurrently. This is because sit tunnels are NETIF_F_LLTX, meaning their ndo_start_xmit() is not protected by a spinlock. While original KCSAN report was about tx path, rx path has the same issue. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: avoid use-after-free in ip6_fragment()Eric Dumazet2022-12-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 803e84867de59a1e5d126666d25eb4860cfd2ebe ] Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7599: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0xee/0x5c0 mm/slub.c:3683 dst_destroy+0x2ea/0x400 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2250 [inline] rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901 kfree_skb_list include/linux/skbuff.h:1227 [inline] ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211 dev_queue_xmit include/linux/netdevice.h:3008 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The buggy address belongs to the object at ffff88801d403dc0 which belongs to the cache ip6_dst_cache of size 240 The buggy address is located 192 bytes inside of 240-byte region [ffff88801d403dc0, ffff88801d403eb0) The buggy address belongs to the physical page: page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403 memcg:ffff888022f49c81 flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640 raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x213/0x300 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0xa91/0x1400 mm/slub.c:3180 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1459 [inline] free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509 free_unref_page_prepare mm/page_alloc.c:3387 [inline] free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443 __alloc_skb+0x214/0x300 net/core/skbuff.c:497 alloc_skb include/linux/skbuff.h:1267 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline] netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1758fd4688eb ("ipv6: remove unnecessary dst_hold() in ip6_fragment()") Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* dccp/tcp: Reset saddr on failure after inet6?_hash_connect().Kuniyuki Iwashima2022-12-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 77934dc6db0d2b111a8f2759e9ad2fb67f5cffa5 ] When connect() is called on a socket bound to the wildcard address, we change the socket's saddr to a local address. If the socket fails to connect() to the destination, we have to reset the saddr. However, when an error occurs after inet_hash6?_connect() in (dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave the socket bound to the address. From the user's point of view, whether saddr is reset or not varies with errno. Let's fix this inconsistent behaviour. Note that after this patch, the repro [0] will trigger the WARN_ON() in inet_csk_get_port() again, but this patch is not buggy and rather fixes a bug papering over the bhash2's bug for which we need another fix. For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect() by this sequence: s1 = socket() s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s1.bind(('127.0.0.1', 10000)) s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000))) # or s1.connect(('127.0.0.1', 10000)) s2 = socket() s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s2.bind(('0.0.0.0', 10000)) s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2); [0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09 Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfrm: Fix ignored return value in xfrm6_init()Chen Zhongjin2022-12-021-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 40781bfb836eda57d19c0baa37c7e72590e05fdc ] When IPv6 module initializing in xfrm6_init(), register_pernet_subsys() is possible to fail but its return value is ignored. If IPv6 initialization fails later and xfrm6_fini() is called, removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 330 Comm: insmod RIP: 0010:unregister_pernet_operations+0xc9/0x450 Call Trace: <TASK> unregister_pernet_subsys+0x31/0x3e xfrm6_fini+0x16/0x30 [ipv6] ip6_route_init+0xcd/0x128 [ipv6] inet6_init+0x29c/0x602 [ipv6] ... Fix it by catching the error return value of register_pernet_subsys(). Fixes: 8d068875caca ("xfrm: make gc_thresh configurable in all namespaces") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* xfrm: replay: Fix ESN wrap around for GSOChristian Langrock2022-12-021-0/+3
| | | | | | | | | | | | | | | [ Upstream commit 4b549ccce941798703f159b227aa28c716aa78fa ] When using GSO it can happen that the wrong seq_hi is used for the last packets before the wrap around. This can lead to double usage of a sequence number. To avoid this, we should serialize this last GSO packet. Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading") Co-developed-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Christian Langrock <christian.langrock@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to networkAlexander Potapenko2022-11-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c23fb2c82267638f9d206cb96bb93e1f93ad7828 ] When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized. Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tcp/udp: Make early_demux back namespacified.Kuniyuki Iwashima2022-11-103-24/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 11052589cf5c0bab3b4884d423d5f60c38fcf25d upstream. Commit e21145a9871a ("ipv4: namespacify ip_early_demux sysctl knob") made it possible to enable/disable early_demux on a per-netns basis. Then, we introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for TCP/UDP in commit dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp"). However, the .proc_handler() was wrong and actually disabled us from changing the behaviour in each netns. We can execute early_demux if net.ipv4.ip_early_demux is on and each proto .early_demux() handler is not NULL. When we toggle (tcp|udp)_early_demux, the change itself is saved in each netns variable, but the .early_demux() handler is a global variable, so the handler is switched based on the init_net's sysctl variable. Thus, netns (tcp|udp)_early_demux knobs have nothing to do with the logic. Whether we CAN execute proto .early_demux() is always decided by init_net's sysctl knob, and whether we DO it or not is by each netns ip_early_demux knob. This patch namespacifies (tcp|udp)_early_demux again. For now, the users of the .early_demux() handler are TCP and UDP only, and they are called directly to avoid retpoline. So, we can remove the .early_demux() handler from inet6?_protos and need not dereference them in ip6?_rcv_finish_core(). If another proto needs .early_demux(), we can restore it at that time. Fixes: dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20220713175207.7727-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: fix WARNING in ip6_route_net_exit_late()Zhengchao Shao2022-11-101-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 768b3c745fe5789f2430bdab02f35a9ad1148d97 ] During the initialization of ip6_route_net_init_late(), if file ipv6_route or rt6_stats fails to be created, the initialization is successful by default. Therefore, the ipv6_route or rt6_stats file doesn't be found during the remove in ip6_route_net_exit_late(). It will cause WRNING. The following is the stack information: name 'rt6_stats' WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 PKRU: 55555554 Call Trace: <TASK> ops_exit_list+0xb0/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: cdb1876192db ("[NETNS][IPV6] route6 - create route6 proc files for the namespace") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tcp/udp: Fix memory leak in ipv6_renew_options().Kuniyuki Iwashima2022-11-031-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3c52c6bb831f6335c176a0fc7214e26f43adbd11 upstream. syzbot reported a memory leak [0] related to IPV6_ADDRFORM. The scenario is that while one thread is converting an IPv6 socket into IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and allocates memory to inet6_sk(sk)->XXX after conversion. Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources, which inet6_destroy_sock() should have cleaned up. setsockopt(IPV6_ADDRFORM) setsockopt(IPV6_DSTOPTS) +-----------------------+ +----------------------+ - do_ipv6_setsockopt(sk, ...) - sockopt_lock_sock(sk) - do_ipv6_setsockopt(sk, ...) - lock_sock(sk) ^._ called via tcpv6_prot - WRITE_ONCE(sk->sk_prot, &tcp_prot) before WRITE_ONCE() - xchg(&np->opt, NULL) - txopt_put(opt) - sockopt_release_sock(sk) - release_sock(sk) - sockopt_lock_sock(sk) - lock_sock(sk) - ipv6_set_opt_hdr(sk, ...) - ipv6_update_options(sk, opt) - xchg(&inet6_sk(sk)->opt, opt) ^._ opt is never freed. - sockopt_release_sock(sk) - release_sock(sk) Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after acquiring the lock. This issue exists from the initial commit between IPV6_ADDRFORM and IPV6_PKTOPTIONS. [0]: BUG: memory leak unreferenced object 0xffff888009ab9f80 (size 96): comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s) hex dump (first 32 bytes): 01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00 ....H........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline] [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566 [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318 [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline] [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668 [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021 [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789 [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252 [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline] [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline] [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260 [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Meena Shanmugam <meenashanmugam@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: ensure sane device mtu in tunnelsEric Dumazet2022-11-033-13/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d89d7ff01235f218dad37de84457717f699dee79 ] Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* udp: Update reuse->has_conns under reuseport_lock.Kuniyuki Iwashima2022-10-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 69421bf98482d089e50799f45e48b25ce4a8d154 ] When we call connect() for a UDP socket in a reuseport group, we have to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel could select a unconnected socket wrongly for packets sent to the connected socket. However, the current way to set has_conns is illegal and possible to trigger that problem. reuseport_has_conns() changes has_conns under rcu_read_lock(), which upgrades the RCU reader to the updater. Then, it must do the update under the updater's lock, reuseport_lock, but it doesn't for now. For this reason, there is a race below where we fail to set has_conns resulting in the wrong socket selection. To avoid the race, let's split the reader and updater with proper locking. cpu1 cpu2 +----+ +----+ __ip[46]_datagram_connect() reuseport_grow() . . |- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size) | . | | |- rcu_read_lock() | |- reuse = rcu_dereference(sk->sk_reuseport_cb) | | | | | /* reuse->has_conns == 0 here */ | | |- more_reuse->has_conns = reuse->has_conns | |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */ | | | | | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb, | | | more_reuse) | `- rcu_read_unlock() `- kfree_rcu(reuse, rcu) | |- sk->sk_state = TCP_ESTABLISHED Note the likely(reuse) in reuseport_has_conns_set() is always true, but we put the test there for ease of review. [0] For the record, usually, sk_reuseport_cb is changed under lock_sock(). The only exception is reuseport_grow() & TCP reqsk migration case. 1) shutdown() TCP listener, which is moved into the latter part of reuse->socks[] to migrate reqsk. 2) New listen() overflows reuse->socks[] and call reuseport_grow(). 3) reuse->max_socks overflows u16 with the new listener. 4) reuseport_grow() pops the old shutdown()ed listener from the array and update its sk->sk_reuseport_cb as NULL without lock_sock(). shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(), but, reuseport_has_conns_set() is called only for UDP under lock_sock(), so likely(reuse) never be false in reuseport_has_conns_set(). [0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/ Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: nft_fib: Fix for rpath check with VRF devicesPhil Sutter2022-10-261-1/+5
| | | | | | | | | | | | | | [ Upstream commit 2a8a7c0eaa8747c16aa4a48d573aa920d5c00a5c ] Analogous to commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by mistake") but for nftables fib expression: Add special treatment of VRF devices so that typical reverse path filtering via 'fib saddr . iif oif' expression works as expected. Fixes: f6d0cbcf09c50 ("netfilter: nf_tables: add fib expression") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: Find dst with sk's xfrm policy not ctl_sksewookseo2022-09-231-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e22aa14866684f77b4f6b6cae98539e520ddb731 upstream. If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sehee Lee <seheele@google.com> Signed-off-by: Sewook Seo <sewookseo@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: sr: fix out-of-bounds read when setting HMAC data.David Lebrun2022-09-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix ICMP/ICMP6 error handlingDavid Howells2022-09-151-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ac56a0b48da86fd1b4389632fb7c4c8a5d86eefa ] Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing it to siphon off UDP packets early in the handling of received UDP packets thereby avoiding the packet going through the UDP receive queue, it doesn't get ICMP packets through the UDP ->sk_error_report() callback. In fact, it doesn't appear that there's any usable option for getting hold of ICMP packets. Fix this by adding a new UDP encap hook to distribute error messages for UDP tunnels. If the hook is set, then the tunnel driver will be able to see ICMP packets. The hook provides the offset into the packet of the UDP header of the original packet that caused the notification. An alternative would be to call the ->error_handler() hook - but that requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error() do, though isn't really necessary or desirable in rxrpc's case is we want to parse them there and then, not queue them). Changes ======= ver #3) - Fixed an uninitialised variable. ver #2) - Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals. Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: Fix data-races around sysctl_devconf_inherit_init_net.Kuniyuki Iwashima2022-08-311-3/+2
| | | | | | | | | | | | [ Upstream commit a5612ca10d1aa05624ebe72633e0c8c792970833 ] While reading sysctl_devconf_inherit_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 856c395cfa63 ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: Fix data-races around sysctl_optmem_max.Kuniyuki Iwashima2022-08-311-2/+2
| | | | | | | | | | | | [ Upstream commit 7de6d09f51917c829af2b835aba8bb5040f8e86a ] While reading sysctl_optmem_max, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: fix potential refcount leak in ndisc_router_discovery()Xin Xiong2022-08-251-0/+3
| | | | | | | | | | | | | | | | | | | | commit 7396ba87f1edf549284869451665c7c4e74ecd4f upstream. The issue happens on specific paths in the function. After both the object `rt` and `neigh` are grabbed successfully, when `lifetime` is nonzero but the metric needs change, the function just deletes the route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh` again if above conditions hold. The function simply overwrite `neigh` if succeeds or returns if fails, without decreasing the reference count of previous `neigh`. This may result in memory leaks. Fix it by decrementing the reference count of `neigh` in place. Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: do not use RT_TOS for IPv6 flowlabelMatthias May2022-08-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | commit ab7e2e0dfa5d37540ab1dc5376e9a2cb9188925d upstream. According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: add READ_ONCE(sk->sk_bound_dev_if) in INET6_MATCH()Eric Dumazet2022-08-172-4/+4
| | | | | | | | | | | | | | | | | | [ Upstream commit 5d368f03280d3678433a7f119efe15dfbbb87bc8 ] INET6_MATCH() runs without holding a lock on the socket. We probably need to annotate most reads. This patch makes INET6_MATCH() an inline function to ease our changes. v2: inline function only defined if IS_ENABLED(CONFIG_IPV6) Change the name to inet6_match(), this is no longer a macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tcp: Fix data-races around sysctl_tcp_reflect_tos.Kuniyuki Iwashima2022-08-031-2/+2
| | | | | | | | | | | | | [ Upstream commit 870e3a634b6a6cb1543b359007aca73fe6a03ac5 ] While reading sysctl_tcp_reflect_tos, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: mld: fix reference count leak in mld_{query | report}_work()Taehee Yoo2022-08-031-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 3e7d18b9dca388940a19cae30bfc1f76dccd8c28 ] mld_{query | report}_work() processes queued events. If there are too many events in the queue, it re-queue a work. And then, it returns without in6_dev_put(). But if queuing is failed, it should call in6_dev_put(), but it doesn't. So, a reference count leak would occur. THREAD0 THREAD1 mld_report_work() spin_lock_bh() if (!mod_delayed_work()) in6_dev_hold(); spin_unlock_bh() spin_lock_bh() schedule_delayed_work() spin_unlock_bh() Script to reproduce(by Hangbin Liu): ip netns add ns1 ip netns add ns2 ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip -n ns1 link add veth0 type veth peer name veth0 netns ns2 ip -n ns1 link set veth0 up ip -n ns2 link set veth0 up for i in `seq 50`; do for j in `seq 100`; do ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0 ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0 done done modprobe -r veth ip -a netns del splat looks like: unregister_netdevice: waiting for veth0 to become free. Usage count = 2 leaked reference. ipv6_add_dev+0x324/0xec0 addrconf_notify+0x481/0xd10 raw_notifier_call_chain+0xe3/0x120 call_netdevice_notifiers+0x106/0x160 register_netdevice+0x114c/0x16b0 veth_newlink+0x48b/0xa50 [veth] rtnl_newlink+0x11a2/0x1a40 rtnetlink_rcv_msg+0x63f/0xc00 netlink_rcv_skb+0x1df/0x3e0 netlink_unicast+0x5de/0x850 netlink_sendmsg+0x6c9/0xa90 ____sys_sendmsg+0x76a/0x780 __sys_sendmsg+0x27c/0x340 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Tested-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: f185de28d9ae ("mld: add new workqueues for process mld events") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ping6: Fix memleak in ipv6_renew_options().Kuniyuki Iwashima2022-08-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream. When we close ping6 sockets, some resources are left unfreed because pingv6_prot is missing sk->sk_prot->destroy(). As reported by syzbot [0], just three syscalls leak 96 bytes and easily cause OOM. struct ipv6_sr_hdr *hdr; char data[24] = {0}; int fd; hdr = (struct ipv6_sr_hdr *)data; hdr->hdrlen = 2; hdr->type = IPV6_SRCRT_TYPE_4; fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP); setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24); close(fd); To fix memory leaks, let's add a destroy function. Note the socket() syscall checks if the GID is within the range of net.ipv4.ping_group_range. The default value is [1, 0] so that no GID meets the condition (1 <= GID <= 0). Thus, the local DoS does not succeed until we change the default value. However, at least Ubuntu/Fedora/RHEL loosen it. $ cat /usr/lib/sysctl.d/50-default.conf ... -net.ipv4.ping_group_range = 0 2147483647 Also, there could be another path reported with these options, and some of them require CAP_NET_RAW. setsockopt IPV6_ADDRFORM (inet6_sk(sk)->pktoptions) IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu) IPV6_HOPOPTS (inet6_sk(sk)->opt) IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt) IPV6_RTHDR (inet6_sk(sk)->opt) IPV6_DSTOPTS (inet6_sk(sk)->opt) IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt) getsockopt IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list) For the record, I left a different splat with syzbot's one. unreferenced object 0xffff888006270c60 (size 96): comm "repro2", pid 231, jiffies 4294696626 (age 13.118s) hex dump (first 32 bytes): 01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554) [<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715) [<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024) [<000000007096a025>] __sys_setsockopt (net/socket.c:2254) [<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262) [<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176 Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com Reported-by: Ayushman Dutta <ayudutta@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: Fix data-races around sysctl_tcp_syncookies.Kuniyuki Iwashima2022-07-291-1/+2
| | | | | | | | | | | | [ Upstream commit f2e383b5bb6bbc60a0b94b87b3e49a2b1aefd11e ] While reading sysctl_tcp_syncookies, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip: Fix data-races around sysctl_ip_no_pmtu_disc.Kuniyuki Iwashima2022-07-291-1/+1
| | | | | | | | | | | | [ Upstream commit 0968d2a441bf6afb551fd99e60fa65ed67068963 ] While reading sysctl_ip_no_pmtu_disc, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviorsAndrea Mayer2022-07-211-2/+0
| | | | | | | | | | | | | | | | | | | | [ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ] The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the packet within an outer IPv6 header with the specified Segment Routing Header (SRH); ii) insert the specified SRH directly after the IPv6 header of the packet. This patch removes the initialization of the IPv6 header payload length from the input_action_end_b6{_encap}() functions, as it is now handled properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb checksum. Fixes: 140f04c33bbc ("ipv6: sr: implement several seg6local actions") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* seg6: fix skb checksum evaluation in SRH encapsulation/insertionAndrea Mayer2022-07-211-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ] Support for SRH encapsulation and insertion was introduced with commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels"), through the seg6_do_srh_encap() and seg6_do_srh_inline() functions, respectively. The former encapsulates the packet in an outer IPv6 header along with the SRH, while the latter inserts the SRH between the IPv6 header and the payload. Then, the headers are initialized/updated according to the operating mode (i.e., encap/inline). Finally, the skb checksum is calculated to reflect the changes applied to the headers. The IPv6 payload length ('payload_len') is not initialized within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e. the caller of seg6_do_srh_{inline,encap}(). However, this operation invalidates the skb checksum, since the 'payload_len' is updated only after the checksum is evaluated. To solve this issue, the initialization of the IPv6 payload length is moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}() functions and before the skb checksum update takes place. Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* nexthop: Fix data-races around nexthop_compat_mode.Kuniyuki Iwashima2022-07-211-1/+1
| | | | | | | | | | | | [ Upstream commit bdf00bf24bef9be1ca641a6390fd5487873e0d2e ] While reading nexthop_compat_mode, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 4f80116d3df3 ("net: ipv4: add sysctl for nexthop api compatibility mode") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* icmp: Fix data-races around sysctl_icmp_echo_enable_probe.Kuniyuki Iwashima2022-07-211-1/+1
| | | | | | | | | | | | | [ Upstream commit 4a2f7083cc6cb72dade9a63699ca352fad26d1cd ] While reading sysctl_icmp_echo_enable_probe, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Fixes: 1fd07f33c3ea ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: fix lockdep splat in in6_dump_addrs()Eric Dumazet2022-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4e43e64d0f1332fcc503babad4dc31aead7131ca upstream. As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6/sit: fix ipip6_tunnel_get_prl return valuekatrinzhou2022-07-071-5/+3
| | | | | | | | | | | | | | | | commit adabdd8f6acabc0c3fdbba2e7f5a2edd9c5ef22d upstream. When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM. Move the position of label "out" to return correctly. Addresses-Coverity: ("Unused value") Fixes: 300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.") Signed-off-by: katrinzhou <katrinzhou@tencent.com> Reviewed-by: Eric Dumazet<edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: ipv6: unexport __init-annotated seg6_hmac_net_init()YueHaibing2022-07-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | commit 53ad46169fe2996fe1b623ba6c9c4fa33847876f upstream. As of commit 5801f064e351 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"), EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. This remove the EXPORT_SYMBOL to fix modpost warning: WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init() The symbol seg6_hmac_net_init is exported and annotated __init Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: take care of disable_policy when restoring routesNicolas Dichtel2022-07-072-5/+8
| | | | | | | | | | | | | | | | | | | | | | commit 3b0dc529f56b5f2328244130683210be98f16f7f upstream. When routes corresponding to addresses are restored by fixup_permanent_addr(), the dst_nopolicy parameter was not set. The typical use case is a user that configures an address on a down interface and then put this interface up. Let's take care of this flag in addrconf_f6i_alloc(), so that every callers benefit ont it. CC: stable@kernel.org CC: David Forster <dforster@brocade.com> Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* erspan: do not assume transport header is always setEric Dumazet2022-06-291-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 301bd140ed0b24f0da660874c7e8a47dad8c8222 ] Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net: ipv6: unexport __init-annotated seg6_hmac_init()Masahiro Yamada2022-06-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5801f064e35181c71857a80ff18af4dbec3c5f5c ] EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tcp: add accessors to read/set tp->snd_cwndEric Dumazet2022-06-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 40570375356c874b1578e05c1dcc3ff7c1322dbe ] We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: Don't send rs packets to the interface of ARPHRD_TUNNELjianghaoran2022-06-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ] ARPHRD_TUNNEL interface can't process rs packets and will generate TX errors ex: ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2 ifconfig ethn x.x.x.x ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1480 inet x.x.x.x netmask 255.255.255.255 destination x.x.x.x inet6 fe80::5efe:ac1e:3cdb prefixlen 64 scopeid 0x20<link> tunnel txqueuelen 1000 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 3 dropped 0 overruns 0 carrier 0 collisions 0 Signed-off-by: jianghaoran <jianghaoran@kylinos.cn> Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: fix locking issues with loops over idev->addr_listNiels Dossche2022-06-091-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 51454ea42c1ab4e0c2828bb0d4d53957976980de ] idev->addr_list needs to be protected by idev->lock. However, it is not always possible to do so while iterating and performing actions on inet6_ifaddr instances. For example, multiple functions (like addrconf_{join,leave}_anycast) eventually call down to other functions that acquire the idev->lock. The current code temporarily unlocked the idev->lock during the loops, which can cause race conditions. Moving the locks up is also not an appropriate solution as the ordering of lock acquisition will be inconsistent with for example mc_lock. This solution adds an additional field to inet6_ifaddr that is used to temporarily add the instances to a temporary list while holding idev->lock. The temporary list can then be traversed without holding idev->lock. This change was done in two places. In addrconf_ifdown, the list_for_each_entry_safe variant of the list loop is also no longer necessary as there is no deletion within that specific loop. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* secure_seq: use the 64 bits of the siphash for port offset calculationWilly Tarreau2022-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit b2d057560b8107c633b39aabe517ff9d93f285e3 ] SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit 7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output remained truncated to 32-bit only. In order to exploit more bits from the hash, let's make the functions return the full 64-bit of siphash_3u32(). We also make sure the port offset calculation in __inet_hash_connect() remains done on 32-bit to avoid the need for div_u64_rem() and an extra cost on 32-bit systems. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()Eric Dumazet2022-05-121-4/+4
| | | | | | | | | | | | | | | | | | | | | commit a9384a4c1d250cb40cebf50e41459426d160b08e upstream. Whenever RCU protected list replaces an object, the pointer to the new object needs to be updated _before_ the call to kfree_rcu() or call_rcu() Also ip6_mc_msfilter() needs to update the pointer before releasing the mc_lock mutex. Note that linux-5.13 was supporting kfree_rcu(NULL, rcu), so this fix does not need the conditional test I was forced to use in the equivalent patch for IPv4. Fixes: 882ba1f73c06 ("mld: convert ipv6_mc_socklist->sflist to RCU") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: Update ip6_route_me_harder to consider L3 domainMartin Willi2022-05-091-2/+8
| | | | | | | | | | | | | | | | | | commit 8ddffdb9442a9d60b4a6e679ac48d7d21403a674 upstream. The commit referenced below fixed packet re-routing if Netfilter mangles a routing key property of a packet and the packet is routed in a VRF L3 domain. The fix, however, addressed IPv4 re-routing, only. This commit applies the same behavior for IPv6. While at it, untangle the nested ternary operator to make the code more readable. Fixes: 6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain") Cc: stable@vger.kernel.org Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: make sure treq->af_specific is initializedEric Dumazet2022-05-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ] syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye2022-05-091-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip6_gre: Make o_seqno start from 0 in native modePeilin Ye2022-05-091-6/+5
| | | | | | | | | | | | | | | | | | | [ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ] For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ipv6: make ip6_rt_gc_expire an atomic_tEric Dumazet2022-04-271-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 9cb7c013420f98fa6fd12fc6a5dc055170c108db ] Reads and Writes to ip6_rt_gc_expire always have been racy, as syzbot reported lately [1] There is a possible risk of under-flow, leading to unexpected high value passed to fib6_run_gc(), although I have not observed this in the field. Hosts hitting ip6_dst_gc() very hard are under pretty bad state anyway. [1] BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0: ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311 dst_alloc+0x9b/0x160 net/core/dst.c:86 ip6_dst_alloc net/ipv6/route.c:344 [inline] icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261 mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807 mld_send_cr net/ipv6/mcast.c:2119 [inline] mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 value changed: 0x00000bb3 -> 0x00000ba9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip6_gre: Fix skb_under_panic in __gre6_xmit()Peilin Ye2022-04-271-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ab198e1d0dd8dc4bc7575fb50758e2cbd51e14e1 ] Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh: [ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11 <...> [ 82.607380] Call Trace: [ 82.609389] <TASK> [ 82.611136] skb_push.cold.109+0x10/0x10 [ 82.614289] __gre6_xmit+0x41e/0x590 [ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0 [ 82.620526] dev_hard_start_xmit+0xf1/0x330 [ 82.623882] sch_direct_xmit+0xe4/0x250 [ 82.626961] __dev_queue_xmit+0x720/0xfe0 <...> [ 82.633431] packet_sendmsg+0x96a/0x1cb0 [ 82.636568] sock_sendmsg+0x30/0x40 <...> The following sequence of events caused the BUG: 1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen()); 2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4; 3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel()); 4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ); 5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG. As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen. Reproducer: OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up ip netns exec at_ns0 \ ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24 ip link set dev ip6gretap11 up tc qdisc add dev ip6gretap11 clsact tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel ping6 -c 3 -w 10 -q ::11 Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode") Reported-by: Feng Zhou <zhoufeng.zf@bytedance.com> Co-developed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()Peilin Ye2022-04-271-2/+3
| | | | | | | | | | | | | [ Upstream commit f40c064e933d7787ca7411b699504d7a2664c1f5 ] Do not update tunnel->tun_hlen in data plane code. Use a local variable instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit(). Co-developed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* esp: limit skb_page_frag_refill use to a single pageSabrina Dubroca2022-04-271-3/+2
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5bd8baab087dff657e05387aee802e70304cc813 ] Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch. This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len). Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-19 02:31:07 +0000