summaryrefslogtreecommitdiffstats
path: root/net/rfkill
Commit message (Collapse)AuthorAgeFilesLines
* net: rfkill: gpio: prevent value glitch during probeJosua Mayer2023-10-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b2f750c3a80b285cd60c9346f8c96bd0a2a66cde upstream. When either reset- or shutdown-gpio have are initially deasserted, e.g. after a reboot - or when the hardware does not include pull-down, there will be a short toggle of both IOs to logical 0 and back to 1. It seems that the rfkill default is unblocked, so the driver should not glitch to output low during probe. It can lead e.g. to unexpected lte modem reconnect: [1] root@localhost:~# dmesg | grep "usb 2-1" [ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 21.215278] usb 2-1: USB disconnect, device number 2 [ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd The glitch has been discovered on an arm64 board, now that device-tree support for the rfkill-gpio driver has finally appeared :). Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to GPIOD_ASIS to avoid any glitches. The rfkill driver will set the intended value during rfkill_sync_work. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Josua Mayer <josua@solid-run.com> Link: https://lore.kernel.org/r/20231004163928.14609-1-josua@solid-run.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rfkill: Fix incorrect check to avoid NULL pointer dereferenceAditya Pakki2020-01-121-2/+5
| | | | | | | | | | | | | [ Upstream commit 6fc232db9e8cd50b9b83534de9cd91ace711b2d7 ] In rfkill_register, the struct rfkill pointer is first derefernced and then checked for NULL. This patch removes the BUG_ON and returns an error to the caller in case rfkill is NULL. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.edu Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rfkill: allocate static minorMarcel Holtmann2019-12-311-2/+7
| | | | | | | | | | | | | | | | | | [ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ] udev has a feature of creating /dev/<node> device-nodes if it finds a devnode:<node> modalias. This allows for auto-loading of modules that provide the node. This requires to use a statically allocated minor number for misc character devices. However, rfkill uses dynamic minor numbers and prevents auto-loading of the module. So allocate the next static misc minor number and use it for rfkill. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rfkill: gpio: fix memory leak in probe error pathJohan Hovold2018-05-161-1/+6
| | | | | | | | | | | | | | | | commit 4bf01ca21e2e0e4561d1a03c48c3d740418702db upstream. Make sure to free the rfkill device in case registration fails during probe. Fixes: 5e7ca3937fbe ("net: rfkill: gpio: convert to resource managed allocation") Cc: stable <stable@vger.kernel.org> # 3.13 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: rfkill: gpio: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko2017-06-131-4/+1
| | | | | | | | Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: remove rfkill-regulatorJohannes Berg2017-01-243-166/+0
| | | | | | | | | | | | | There are no users of this ("vrfkill") in the tree, so it's just dead code - remove it. This also isn't really how rfkill is supposed to be used - it's intended as a signalling mechanism to/from the device, which the driver (and partially cfg80211) will handle - having a separate rfkill instance for a regulator is confusing, the driver should use the regulator instead to turn off the device when requested. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: Add rfkill-any LED triggerMichał Kępień2017-01-091-1/+71
| | | | | | | | | | | Add a new "global" (i.e. not per-rfkill device) LED trigger, rfkill-any, which may be useful on laptops with a single "radio LED" and multiple radio transmitters. The trigger is meant to turn a LED on whenever there is at least one radio transmitter active and turn it off otherwise. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Revert "rfkill: Add rfkill-any LED trigger"Johannes Berg2016-12-201-74/+1
| | | | | | | | | | | | | This reverts commit 73f4f76a196d7adb11a1e192bd8024fe0bc83910. As Mike reported, and I should've seen in review, we can't call the new LED functions, which acquire the mutex, from places like rfkill_set_sw_state() that are documented to be callable from any context the user likes to use. For Mike's case it led to a deadlock, but other scenarios are possible. Reported-by: Михаил Кринкин <krinkin.m.u@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: hide unused goto labelArnd Bergmann2016-12-161-0/+2
| | | | | | | | | | | | | | A cleanup introduced a harmless warning in some configurations: net/rfkill/core.c: In function 'rfkill_init': net/rfkill/core.c:1350:1: warning: label 'error_input' defined but not used [-Wunused-label] This adds another #ifdef around the label to match that around the caller. Fixes: 6124c53edeea ("rfkill: Cleanup error handling in rfkill_init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: Add rfkill-any LED triggerMichał Kępień2016-12-131-0/+73
| | | | | | | | | | | | | | | | Add a new "global" (i.e. not per-rfkill device) LED trigger, rfkill-any, which may be useful on laptops with a single "radio LED" and multiple radio transmitters. The trigger is meant to turn a LED on whenever there is at least one radio transmitter active and turn it off otherwise. This requires taking rfkill_global_mutex before calling rfkill_set_block() in rfkill_resume(): since __rfkill_any_led_trigger_event() is called from rfkill_set_block() unconditionally, each caller of the latter needs to take care of locking rfkill_global_mutex. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: Cleanup error handling in rfkill_init()Michał Kępień2016-12-131-11/+12
| | | | | | | | Use a separate label per error condition in rfkill_init() to make it a bit cleaner and easier to extend. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: simplify rfkill_set_hw_state() slightlyJohannes Berg2016-12-131-4/+1
| | | | | | | | Simplify the two conditions gating the schedule_work() into a single one and get rid of the additional exit point from the function in doing so. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: Use switch to demux userspace operationsJoão Paulo Rechi Vita2016-04-051-14/+22
| | | | | | | | | | Using a switch to handle different ev.op values in rfkill_fop_write() makes the code easier to extend, as out-of-range values can always be handled by the default case. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> [roll in fix for RFKILL_OP_CHANGE from Jouni] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2016-02-26' of ↵David S. Miller2016-03-013-106/+93
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Here's another round of updates for -next: * big A-MSDU RX performance improvement (avoid linearize of paged RX) * rfkill changes: cleanups, documentation, platform properties * basic PBSS support in cfg80211 * MU-MIMO action frame processing support * BlockAck reordering & duplicate detection offload support * various cleanups & little fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * rfkill: Factor rfkill_global_states[].cur assignmentsJoão Paulo Rechi Vita2016-02-241-21/+17
| | | | | | | | | | | | | | | | Factor all assignments to rfkill_global_states[].cur into a single function rfkill_update_global_state(). Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: Remove extra blank lineJoão Paulo Rechi Vita2016-02-241-1/+0
| | | | | | | | | | Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: Improve documentation languageJoão Paulo Rechi Vita2016-02-241-2/+2
| | | | | | | | | | Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * net: rfkill: gpio: remove rfkill_gpio_platform_dataHeikki Krogerus2016-02-242-10/+1
| | | | | | | | | | | | | | No more users for it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * net: rfkill: gpio: get the name and type from device propertyHeikki Krogerus2016-02-241-5/+11
| | | | | | | | | | | | | | This prepares the driver for removal of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * net: rfkill: add rfkill_find_type functionHeikki Krogerus2016-02-241-28/+30
| | | | | | | | | | | | | | | | | | Helper for finding the type based on name. Useful if the type needs to be determined based on device property. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> [modify rfkill_types array and BUILD_BUG_ON to not cause errors] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: Remove obsolete "claim" sysfs interfaceJoão Paulo Rechi Vita2016-02-241-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was scheduled to be removed in 2012 by: commit 69c86373c6ea1149aa559e6088362d58d8ec8835 Author: florian@mickler.org <florian@mickler.org> Date: Wed Feb 24 12:05:16 2010 +0100 Document the rfkill sysfs ABI This moves sysfs ABI info from Documentation/rfkill.txt to the ABI subfolder and reformats it. This also schedules the deprecated sysfs parts to be removed in 2012 (claim file) and 2014 (state file). Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: remove/inline __rfkill_set_hw_stateJoão Paulo Rechi Vita2016-02-241-26/+15
| | | | | | | | | | | | | | | | | | __rfkill_set_hw_state() is only one used in rfkill_set_hw_state(), and none of them are long or complicated, so merging the two makes the code easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: use variable instead of duplicating the expressionJoão Paulo Rechi Vita2016-02-241-1/+1
| | | | | | | | | | | | | | | | RFKILL_BLOCK_SW value have just been saved to prev, no need to check it again in the if expression. This makes code a little bit easier to read. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: disentangle polling pause and suspendJohannes Berg2016-02-241-2/+15
| | | | | | | | | | | | | | | | | | | | When suspended while polling is paused, polling will erroneously resume at resume time. Fix this by tracking pause and suspend in separate state variable and adding the necessary checks. Clarify the documentation on this as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | rfkill: fix rfkill_fop_read wait_event usageJohannes Berg2016-01-261-12/+4
|/ | | | | | | | | | | | | | | | | | | The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Cc: stable@vger.kernel.org Fixes: c64fb01627e24 ("rfkill: create useful userspace interface") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Bluetooth: hci_bcm: move all Broadcom ACPI IDs to BCM HCI driverHeikki Krogerus2016-01-041-4/+0
| | | | | | | | | | The IDs should all be for Broadcom BCM43241 module, and hci_bcm is now the proper driver for them. This removes one of two different ways of handling PM with the module. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* rfkill: copy the name into the rfkill structJohannes Berg2015-12-101-3/+3
| | | | | | | | | | | | | Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* rfkill: Copy "all" global state to other typesJoão Paulo Rechi Vita2015-09-041-1/+9
| | | | | | | | | | | When switching the state of all RFKill switches of type all we need to replicate the RFKILL_TYPE_ALL global state to all the other types global state, so it is used to initialize persistent RFKill switches on register. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'for-upstream' of ↵David S. Miller2015-08-171-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-08-16 Here's what's likely the last bluetooth-next pull request for 4.3: - 6lowpan/802.15.4 refactoring, cleanups & fixes - Document 6lowpan netdev usage in Documentation/networking/6lowpan.txt - Support for UART based QCA Bluetooth controllers - Power management support for Broeadcom Bluetooth controllers - Change LE connection initiation to always use passive scanning first - Support for new Silicon Wave USB ID Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: rfkill: gpio: Remove BCM2E39 supportFrederic Danis2015-08-111-1/+0
| | | | | | | | | | | | | | | | Power management support for BCM2E39 is now performed in Bluetooth BCM UART driver. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | rfkill: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-08-131-1/+2
|/ | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: rfkill: gpio: make better use of gpiod APIUwe Kleine-König2015-05-291-14/+10
| | | | | | | | | | | | | | | | | Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Furthermore there is devm_gpiod_get_optional which is designed to get optional gpios. Simplify driver accordingly. Note this makes error checking more strict because only -ENOENT is ignored when searching for the GPIOs which is good. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: rfkill: Switch to PM opsLars-Peter Clausen2015-05-201-3/+9
| | | | | | | | Use dev_pm_ops instead of the legacy suspend/resume callbacks for the rfkill class suspend and resume operations. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2015-02-03' of ↵David S. Miller2015-02-041-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Last round of updates for net-next: * revert a patch that caused a regression with mesh userspace (Bob) * fix a number of suspend/resume related races (from Emmanuel, Luca and myself - we'll look at backporting later) * add software implementations for new ciphers (Jouni) * add a new ACPI ID for Broadcom's rfkill (Mika) * allow using netns FD for wireless (Vadim) * some other cleanups (various) Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: rfkill: Add Broadcom BCM2E40 bluetooth ACPI IDMika Westerberg2015-02-031-0/+1
| | | | | | | | | | | | | | This is yet another Broadcom bluetooth chip with ACPI ID BCM2E40. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-142-2/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * net: rfkill: drop owner assignment from platform_driversWolfram Sang2014-10-202-2/+0
| | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | net: rfkill: gpio: Add default GPIO driver mappings for ACPIMika Westerberg2014-11-041-3/+15
|/ | | | | | | | | | | | | | | | | | | | | | | | | | The driver uses devm_gpiod_get_index(..., index) so that the index refers directly to the GpioIo resource under the ACPI device. The problem with this is that if the ordering changes we get wrong GPIOs. With ACPI 5.1 _DSD we can now use names instead to reference GPIOs analogous to Device Tree. However, we still have systems out there that do not provide _DSD at all. These systems must be supported as well. Luckily we now have acpi_dev_add_driver_gpios() that can be used to provide mappings for systems where _DSD is not provided and still take advantage of _DSD if it exists. This patch changes the driver to create default GPIO mappings if we are running on ACPI system. While there we can drop the indices completely and use devm_gpiod_get() with name instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* net: rfkill: kernel-doc warning fixesFabian Frederick2014-10-081-2/+2
| | | | | | | s/state/blocked Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: rfkill: gpio: Fix clock statusLoic Poulain2014-09-221-1/+1
| | | | | | | | Clock is disabled when the device is blocked. So, clock_enabled is the logical negation of "blocked". Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: rfkill: gpio: Enable module auto-loading for ACPI based switchesMarcel Holtmann2014-09-161-0/+1
| | | | | | | | For the ACPI based switches the MODULE_DEVICE_TABLE is missing to export the entries for module auto-loading. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* net: rfkill: gpio: Add more Broadcom bluetooth ACPI IDsMika Westerberg2014-08-251-0/+1
| | | | | | | This adds one more ACPI ID of a Broadcom bluetooth chip. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville2014-05-221-11/+8
|\
| * rfkill-gpio: Use gpio cansleep versionLoic Poulain2014-05-071-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | If gpio controller requires waiting for read and write GPIO values, then we have to use the gpio cansleep api. Fix the rfkill_gpio_set_power which calls only the nonsleep version (causing kernel warning). There is no problem to use the cansleep version here because we are not in IRQ handler or similar context (cf rfkill_set_block). Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: rfkill: gpio: hard-code the gpio namesHeikki Krogerus2014-04-111-17/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to dynamically generate the names. This will fix a static checker warning.. net/rfkill/rfkill-gpio.c:144 rfkill_gpio_probe() warn: variable dereferenced before check 'rfkill->name' Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chipHeikki Krogerus2014-04-111-0/+5
| | | | | | | | | | | | | | | | | | | | This adds ACPI IDs for Broadcom bluetooth chip BCM43241 used on various Baytrail based boards such as Lenovo Miix 2 and Asus Transformer Book T100TA. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2Heikki Krogerus2014-04-111-0/+1
| | | | | | | | | | | | | | | | On Lenovo Miix 2 8", BCM4752 is renamed LNV4752. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: rfkill: gpio: remove unused and obsolete platform parametersHeikki Krogerus2014-04-111-14/+1
|/ | | | | | | | | | | | After upgrading to descriptor based gpios, the gpio numbers are not used anymore. The power_clk_name and the platform specific setup and close hooks are not used by anybody, and we should not encourage use of such things, so removing them. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: rfkill: move poll work to power efficient workqueueShaibal Dutta2014-02-041-3/+6
| | | | | | | | | | | | | | | | | | This patch moves the rfkill poll_work to the power efficient workqueue. This work does not have to be bound to the CPU that scheduled it, hence the selection of CPU that executes it would be left to the scheduler. Net result is that CPU idle times would be extended, resulting in power savings. This behaviour is enabled when CONFIG_WQ_POWER_EFFICIENT is selected. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Shaibal Dutta <shaibal.dutta@broadcom.com> [zoran.markovic@linaro.org: Rebased to latest kernel, added commit message. Fixed workqueue selection after suspend/resume cycle.] Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-01-251-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 11:31:56 +0000