summaryrefslogtreecommitdiffstats
path: root/net
Commit message (Collapse)AuthorAgeFilesLines
...
* net: sched: fix reordering issuesEric Dumazet2019-09-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b88dd52c62bb5c5d58f0963287f41fd084352c57 ] Whenever MQ is not used on a multiqueue device, we experience serious reordering problems. Bisection found the cited commit. The issue can be described this way : - A single qdisc hierarchy is shared by all transmit queues. (eg : tc qdisc replace dev eth0 root fq_codel) - When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting a different transmit queue than the one used to build a packet train, we stop building the current list and save the 'bad' skb (P1) in a special queue. (bad_txq) - When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this skb (P1), it checks if the associated transmit queues is still in frozen state. If the queue is still blocked (by BQL or NIC tx ring full), we leave the skb in bad_txq and return NULL. - dequeue_skb() calls q->dequeue() to get another packet (P2) The other packet can target the problematic queue (that we found in frozen state for the bad_txq packet), but another cpu just ran TX completion and made room in the txq that is now ready to accept new packets. - Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent at next round. In practice P2 is the lead of a big packet train (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/ To solve this problem, we have to block the dequeue process as long as the first packet in bad_txq can not be sent. Reordering issues disappear and no side effects have been seen. Fixes: a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: gso: Fix skb_segment splat when splitting gso_size mangled skb having ↵Shmulik Ladkani2019-09-191-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linear-headed frag_list [ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ] Historically, support for frag_list packets entering skb_segment() was limited to frag_list members terminating on exact same gso_size boundaries. This is verified with a BUG_ON since commit 89319d3801d1 ("net: Add frag_list support to skb_segment"), quote: As such we require all frag_list members terminate on exact MSS boundaries. This is checked using BUG_ON. As there should only be one producer in the kernel of such packets, namely GRO, this requirement should not be difficult to maintain. However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"), the "exact MSS boundaries" assumption no longer holds: An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but leaves the frag_list members as originally merged by GRO with the original 'gso_size'. Example of such programs are bpf-based NAT46 or NAT64. This lead to a kernel BUG_ON for flows involving: - GRO generating a frag_list skb - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room() - skb_segment() of the skb See example BUG_ON reports in [0]. In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"), skb_segment() was modified to support the "gso_size mangling" case of a frag_list GRO'ed skb, but *only* for frag_list members having head_frag==true (having a page-fragment head). Alas, GRO packets having frag_list members with a linear kmalloced head (head_frag==false) still hit the BUG_ON. This commit adds support to skb_segment() for a 'head_skb' packet having a frag_list whose members are *non* head_frag, with gso_size mangled, by disabling SG and thus falling-back to copying the data from the given 'head_skb' into the generated segmented skbs - as suggested by Willem de Bruijn [1]. Since this approach involves the penalty of skb_copy_and_csum_bits() when building the segments, care was taken in order to enable this solution only when required: - untrusted gso_size, by testing SKB_GSO_DODGY is set (SKB_GSO_DODGY is set by any gso_size mangling functions in net/core/filter.c) - the frag_list is non empty, its item is a non head_frag, *and* the headlen of the given 'head_skb' does not match the gso_size. [0] https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/ https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/ [1] https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/ Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: Fix null de-reference of device refcountSubash Abhinov Kasiviswanathan2019-09-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ] In event of failure during register_netdevice, free_netdev is invoked immediately. free_netdev assumes that all the netdevice refcounts have been dropped prior to it being called and as a result frees and clears out the refcount pointer. However, this is not necessarily true as some of the operations in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for invocation after a grace period. The IPv4 callback in_dev_rcu_put tries to access the refcount after free_netdev is called which leads to a null de-reference- 44837.761523: <6> Unable to handle kernel paging request at virtual address 0000004a88287000 44837.761651: <2> pc : in_dev_finish_destroy+0x4c/0xc8 44837.761654: <2> lr : in_dev_finish_destroy+0x2c/0xc8 44837.762393: <2> Call trace: 44837.762398: <2> in_dev_finish_destroy+0x4c/0xc8 44837.762404: <2> in_dev_rcu_put+0x24/0x30 44837.762412: <2> rcu_nocb_kthread+0x43c/0x468 44837.762418: <2> kthread+0x118/0x128 44837.762424: <2> ret_from_fork+0x10/0x1c Fix this by waiting for the completion of the call_rcu() in case of register_netdevice errors. Fixes: 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'Christophe JAILLET2019-09-191-1/+1
| | | | | | | | | | | | [ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ] The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init. Fixes: d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bridge/mdb: remove wrong use of NLM_F_MULTINicolas Dichtel2019-09-191-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit 94a72b3f024fc7e9ab640897a1e38583a470659d ] NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end. In fact, NLMSG_DONE is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 949f1e39a617 ("bridge: mdb: notify on router port add and del") CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* {nl,mac}80211: fix interface combinations on crypto controlled devicesManikanta Pubbisetty2019-09-164-13/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e6f4051123fd33901e9655a675b22aefcdc5d277 ] Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") has introduced a change which allows 4addr operation on crypto controlled devices (ex: ath10k). This change has inadvertently impacted the interface combinations logic on such devices. General rule is that software interfaces like AP/VLAN should not be listed under supported interface combinations and should not be considered during validation of these combinations; because of the aforementioned change, AP/VLAN interfaces(if present) will be checked against interfaces supported by the device and blocks valid interface combinations. Consider a case where an AP and AP/VLAN are up and running; when a second AP device is brought up on the same physical device, this AP will be checked against the AP/VLAN interface (which will not be part of supported interface combinations of the device) and blocks second AP to come up. Add a new API cfg80211_iftype_allowed() to fix the problem, this API works for all devices with/without SW crypto control. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* hv_sock: Fix hang when a connection is closedDexuan Cui2019-09-161-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 685703b497bacea8765bb409d6b73455b73c540e ] There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998c28d ("hv_sock: Add support for delayed close") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* batman-adv: Only read OGM tvlv_len after buffer len checkSven Eckelmann2019-09-161-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | commit a15d56a60760aa9dbe26343b9a0ac5228f35d445 upstream. Multiple batadv_ogm_packet can be stored in an skbuff. The functions batadv_iv_ogm_send_to_if()/batadv_iv_ogm_receive() use batadv_iv_ogm_aggr_packet() to check if there is another additional batadv_ogm_packet in the skb or not before they continue processing the packet. The length for such an OGM is BATADV_OGM_HLEN + batadv_ogm_packet->tvlv_len. The check must first check that at least BATADV_OGM_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Reported-by: syzbot+355cab184197dbbfa384@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* batman-adv: fix uninit-value in batadv_netlink_get_ifindex()Eric Dumazet2019-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3ee1bb7aae97324ec9078da1f00cb2176919563f upstream. batadv_netlink_get_ifindex() needs to make sure user passed a correct u32 attribute. syzbot reported : BUG: KMSAN: uninit-value in batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968 CPU: 1 PID: 11705 Comm: syz-executor888 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 batadv_netlink_dump_hardif+0x70d/0x880 net/batman-adv/netlink.c:968 genl_lock_dumpit+0xc6/0x130 net/netlink/genetlink.c:482 netlink_dump+0xa84/0x1ab0 net/netlink/af_netlink.c:2253 __netlink_dump_start+0xa3a/0xb30 net/netlink/af_netlink.c:2361 genl_family_rcv_msg net/netlink/genetlink.c:550 [inline] genl_rcv_msg+0xfc1/0x1a40 net/netlink/genetlink.c:627 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2486 genl_rcv+0x63/0x80 net/netlink/genetlink.c:638 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1337 netlink_sendmsg+0x127e/0x12f0 net/netlink/af_netlink.c:1926 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:661 [inline] ___sys_sendmsg+0xcc6/0x1200 net/socket.c:2260 __sys_sendmsg net/socket.c:2298 [inline] __do_sys_sendmsg net/socket.c:2307 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2305 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2305 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440209 Fixes: b60620cf567b ("batman-adv: netlink: hardif query") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: nft_flow_offload: skip tcp rst and fin packetsPablo Neira Ayuso2019-09-101-3/+6
| | | | | | | | | | | | | | [ Upstream commit dfe42be15fde16232340b8b2a57c359f51cc10d9 ] TCP rst and fin packets do not qualify to place a flow into the flowtable. Most likely there will be no more packets after connection closure. Without this patch, this flow entry expires and connection tracking picks up the entry in ESTABLISHED state using the fixup timeout, which makes this look inconsistent to the user for a connection that is actually already closed. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: nf_tables: use-after-free in failing rule with bound setPablo Neira Ayuso2019-09-101-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6a0a8d10a3661a036b55af695542a714c429ab7c ] If a rule that has already a bound anonymous set fails to be added, the preparation phase releases the rule and the bound set. However, the transaction object from the abort path still has a reference to the set object that is stale, leading to a use-after-free when checking for the set->bound field. Add a new field to the transaction that specifies if the set is bound, so the abort path can skip releasing it since the rule command owns it and it takes care of releasing it. After this update, the set->bound field is removed. [ 24.649883] Unable to handle kernel paging request at virtual address 0000000000040434 [ 24.657858] Mem abort info: [ 24.660686] ESR = 0x96000004 [ 24.663769] Exception class = DABT (current EL), IL = 32 bits [ 24.669725] SET = 0, FnV = 0 [ 24.672804] EA = 0, S1PTW = 0 [ 24.675975] Data abort info: [ 24.678880] ISV = 0, ISS = 0x00000004 [ 24.682743] CM = 0, WnR = 0 [ 24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000 [ 24.692207] [0000000000040434] pgd=0000000000000000 [ 24.697119] Internal error: Oops: 96000004 [#1] SMP [...] [ 24.889414] Call trace: [ 24.891870] __nf_tables_abort+0x3f0/0x7a0 [ 24.895984] nf_tables_abort+0x20/0x40 [ 24.899750] nfnetlink_rcv_batch+0x17c/0x588 [ 24.904037] nfnetlink_rcv+0x13c/0x190 [ 24.907803] netlink_unicast+0x18c/0x208 [ 24.911742] netlink_sendmsg+0x1b0/0x350 [ 24.915682] sock_sendmsg+0x4c/0x68 [ 24.919185] ___sys_sendmsg+0x288/0x2c8 [ 24.923037] __sys_sendmsg+0x7c/0xd0 [ 24.926628] __arm64_sys_sendmsg+0x2c/0x38 [ 24.930744] el0_svc_common.constprop.0+0x94/0x158 [ 24.935556] el0_svc_handler+0x34/0x90 [ 24.939322] el0_svc+0x8/0xc [ 24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863) [ 24.948336] ---[ end trace cebbb9dcbed3b56f ]--- Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* net/rds: Fix info leak in rds6_inc_info_copy()Ka-Cheong Poon2019-09-101-1/+4
| | | | | | | | | | | | | | | | | [ Upstream commit 7d0a06586b2686ba80c4a2da5f91cb10ffbea736 ] The rds6_inc_info_copy() function has a couple struct members which are leaking stack information. The ->tos field should hold actual information and the ->flags field needs to be zeroed out. Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure") Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support") Reported-by: 黄ID蝴蝶 <butterflyhuangxx@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: remove empty skb from write queue in error casesEric Dumazet2019-09-101-9/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fdfc5c8594c24c5df883583ebd286321a80e0a67 ] Vladimir Rutsky reported stuck TCP sessions after memory pressure events. Edge Trigger epoll() user would never receive an EPOLLOUT notification allowing them to retry a sendmsg(). Jason tested the case of sk_stream_alloc_skb() returning NULL, but there are other paths that could lead both sendmsg() and sendpage() to return -1 (EAGAIN), with an empty skb queued on the write queue. This patch makes sure we remove this empty skb so that Jason code can detect that the queue is empty, and call sk->sk_write_space(sk) accordingly. Fixes: ce5ec440994b ("tcp: ensure epoll edge trigger wakeup when write queue is empty") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: Vladimir Rutsky <rutsky@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: inherit timestamp on mtu probeWillem de Bruijn2019-09-101-1/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 888a5c53c0d8be6e98bc85b677f179f77a647873 ] TCP associates tx timestamp requests with a byte in the bytestream. If merging skbs in tcp_mtu_probe, migrate the tstamp request. Similar to MSG_EOR, do not allow moving a timestamp from any segment in the probe but the last. This to avoid merging multiple timestamps. Tested with the packetdrill script at https://github.com/wdebruij/packetdrill/commits/mtu_probe-1 Link: http://patchwork.ozlabs.org/patch/1143278/#2232897 Fixes: 4ed2d765dfac ("net-timestamp: TCP timestamping") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net_sched: fix a NULL pointer deref in ipt actionCong Wang2019-09-1016-20/+21
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 981471bd3abf4d572097645d765391533aac327d ] The net pointer in struct xt_tgdtor_param is not explicitly initialized therefore is still NULL when dereferencing it. So we have to find a way to pass the correct net pointer to ipt_destroy_target(). The best way I find is just saving the net pointer inside the per netns struct tcf_idrinfo, which could make this patch smaller. Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset") Reported-and-tested-by: itugrok@yahoo.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: sched: act_sample: fix psample group handling on overwriteVlad Buslov2019-09-102-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dbf47a2a094edf58983265e323ca4bdcdb58b5ee ] Action sample doesn't properly handle psample_group pointer in overwrite case. Following issues need to be fixed: - In tcf_sample_init() function RCU_INIT_POINTER() is used to set s->psample_group, even though we neither setting the pointer to NULL, nor preventing concurrent readers from accessing the pointer in some way. Use rcu_swap_protected() instead to safely reset the pointer. - Old value of s->psample_group is not released or deallocated in any way, which results resource leak. Use psample_group_put() on non-NULL value obtained with rcu_swap_protected(). - The function psample_group_put() that released reference to struct psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu grace period when deallocating it. Extend struct psample_group with rcu head and use kfree_rcu when freeing it. Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: fix skb use after free in netpollFeng Sun2019-09-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2c1644cf6d46a8267d79ed95cb9b563839346562 ] After commit baeababb5b85d5c4e6c917efe2a1504179438d3b ("tun: return NET_XMIT_DROP for dropped packets"), when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP, netpoll_send_skb_on_dev will run into following use after free cases: 1. retry netpoll_start_xmit with freed skb; 2. queue freed skb in npinfo->txq. queue_process will also run into use after free case. hit netpoll_send_skb_on_dev first case with following kernel log: [ 117.864773] kernel BUG at mm/slub.c:306! [ 117.864773] invalid opcode: 0000 [#1] SMP PTI [ 117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P OE 5.3.0-050300rc5-generic #201908182231 [ 117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0 [ 117.864781] Call Trace: [ 117.864781] ? tun_net_xmit+0x21c/0x460 [ 117.864781] kfree_skbmem+0x4e/0x60 [ 117.864782] kfree_skb+0x3a/0xa0 [ 117.864782] tun_net_xmit+0x21c/0x460 [ 117.864782] netpoll_start_xmit+0x11d/0x1b0 [ 117.864788] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864789] __br_forward+0x1b9/0x1e0 [bridge] [ 117.864789] ? skb_clone+0x53/0xd0 [ 117.864790] ? __skb_clone+0x2e/0x120 [ 117.864790] deliver_clone+0x37/0x50 [bridge] [ 117.864790] maybe_deliver+0x89/0xc0 [bridge] [ 117.864791] br_flood+0x6c/0x130 [bridge] [ 117.864791] br_dev_xmit+0x315/0x3c0 [bridge] [ 117.864792] netpoll_start_xmit+0x11d/0x1b0 [ 117.864792] netpoll_send_skb_on_dev+0x1b8/0x200 [ 117.864792] netpoll_send_udp+0x2c6/0x3e8 [ 117.864793] write_msg+0xd9/0xf0 [netconsole] [ 117.864793] console_unlock+0x386/0x4e0 [ 117.864793] vprintk_emit+0x17e/0x280 [ 117.864794] vprintk_default+0x29/0x50 [ 117.864794] vprintk_func+0x4c/0xbc [ 117.864794] printk+0x58/0x6f [ 117.864795] loop_fun+0x24/0x41 [printmsg_loop] [ 117.864795] kthread+0x104/0x140 [ 117.864795] ? 0xffffffffc05b1000 [ 117.864796] ? kthread_park+0x80/0x80 [ 117.864796] ret_from_fork+0x35/0x40 Signed-off-by: Feng Sun <loyou85@gmail.com> Signed-off-by: Xiaojun Zhao <xiaojunzhao141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mld: fix memory leak in mld_del_delrec()Eric Dumazet2019-09-101-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a84d016479896b5526a2cc54784e6ffc41c9d6f6 ] Similar to the fix done for IPv4 in commit e5b1c6c6277d ("igmp: fix memory leak in igmpv3_del_delrec()"), we need to make sure mca_tomb and mca_sources are not blindly overwritten. Using swap() then a call to ip6_mc_clear_src() will take care of the missing free. BUG: memory leak unreferenced object 0xffff888117d9db00 (size 64): comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline] [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline] [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline] [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline] [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356 [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449 [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748 [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944 [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558 [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139 [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084 [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline] [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline] [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097 [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Fixes: 9c8bb163ae78 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: Correctly set noencrypt for PAE framesDenis Kenzior2019-09-061-1/+1
| | | | | | | | | | | | | | | | commit f8b43c5cf4b62a19f2210a0f5367b84e1eff1ab9 upstream. The noencrypt flag was intended to be set if the "frame was received unencrypted" according to include/uapi/linux/nl80211.h. However, the current behavior is opposite of this. Cc: stable@vger.kernel.org Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-3-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: Don't memset RXCB prior to PAE interceptDenis Kenzior2019-09-061-2/+2
| | | | | | | | | | | | | | | | | | | commit c8a41c6afa27b8c3f61622dfd882b912da9d6721 upstream. In ieee80211_deliver_skb_to_local_stack intercepts EAPoL frames if mac80211 is configured to do so and forwards the contents over nl80211. During this process some additional data is also forwarded, including whether the frame was received encrypted or not. Unfortunately just prior to the call to ieee80211_deliver_skb_to_local_stack, skb->cb is cleared, resulting in incorrect data being exposed over nl80211. Fixes: 018f6fbf540d ("mac80211: Send control port frames over nl80211") Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190827224120.14545-2-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: fix possible sta leakJohannes Berg2019-09-061-4/+5
| | | | | | | | | | | | | | commit 5fd2f91ad483baffdbe798f8a08f1b41442d1e24 upstream. If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "cfg80211: fix processing world regdomain when non modular"Hodaszi, Robert2019-09-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0d31d4dbf38412f5b8b11b4511d07b840eebe8cb upstream. This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4/icmp: fix rt dst dev null pointer dereferenceHangbin Liu2019-09-061-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e2c693934194fd3b4e795635934883354c06ebc9 ] In __icmp_send() there is a possibility that the rt->dst.dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv4 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmp_send - net = dev_net(rt->dst.dev); <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the reason we need rt->dst.dev is to get the net. So we can just try get it from skb->dev when rt->dst.dev is NULL. v4: Julian Anastasov remind skb->dev also could be NULL. We'd better still use dst.dev and do a check to avoid crash. v3: No changes. v2: fix the issue in __icmp_send() instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: c8b34e680a09 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tcp: make sure EPOLLOUT wont be missedEric Dumazet2019-09-061-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ef8d8ccdc216f797e66cb4a1372f5c4c285ce1e4 ] As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure"), it is crucial we properly set SOCK_NOSPACE when needed. However, Jason patch had a bug, because the 'nonblocking' status as far as sk_stream_wait_memory() is concerned is governed by MSG_DONTWAIT flag passed at sendmsg() time : long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT); So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(), and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE cleared, if sk->sk_sndtimeo has been set to a small (but not zero) value. This patch removes the 'noblock' variable since we must always set SOCK_NOSPACE if -EAGAIN is returned. It also renames the do_nonblock label since we might reach this code path even if we were in blocking mode. Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: Vladimir Rutsky <rutsky@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/smc: make sure EPOLLOUT is raisedJason Baron2019-09-061-4/+2
| | | | | | | | | | | | | | | | | | [ Upstream commit 4651d1802f7063e4d8c0bcad957f46ece0c04024 ] Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE being set when -EAGAIN is returned to ensure that EPOLLOUT is raised. Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior that Eric Dumazet introduced for tcp sockets. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: Default fib6_type to RTN_UNICAST when not setDavid Ahern2019-09-061-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit c7036d97acd2527cef145b5ef9ad1a37ed21bbe6 ] A user reported that routes are getting installed with type 0 (RTN_UNSPEC) where before the routes were RTN_UNICAST. One example is from accel-ppp which apparently still uses the ioctl interface and does not set rtmsg_type. Another is the netlink interface where ipv6 does not require rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6/addrconf: allow adding multicast addr if IFA_F_MCAUTOJOIN is setHangbin Liu2019-09-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit f17f7648a49aa6728649ddf79bdbcac4f1970ce4 ] In commit 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN to make user able to add multicast address on ethernet interface. This works for IPv4, but not for IPv6. See the inet6_addr_add code. static int inet6_addr_add() { ... if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...) } ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr if (!IS_ERR(ifp)) { ... } else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...) } } But in ipv6_add_addr() it will check the address type and reject multicast address directly. So this feature is never worked for IPv6. We should not remove the multicast address check totally in ipv6_add_addr(), but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied. v2: update commit description Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: tls, fix sk_write_space NULL write when tx disabledJohn Fastabend2019-09-061-1/+2
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit d85f01775850a35eae47a0090839baf510c1ef12 ] The ctx->sk_write_space pointer is only set when TLS tx mode is enabled. When running without TX mode its a null pointer but we still set the sk sk_write_space pointer on close(). Fix the close path to only overwrite sk->sk_write_space when the current pointer is to the tls_write_space function indicating the tls module should clean it up properly as well. Reported-by: Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e932cfb ("net/tls: swap sk_write_space on close") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/tls: swap sk_write_space on closeJakub Kicinski2019-09-061-0/+1
| | | | | | | | | | | | | | | [ Upstream commit 57c722e932cfb82e9820bbaae1b1f7222ea97b52 ] Now that we swap the original proto and clear the ULP pointer on close we have to make sure no callback will try to access the freed state. sk_write_space is not part of sk_prot, remember to swap it. Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/tls: Fixed return value when tls_complete_pending_work() failsVakul Garg2019-09-061-4/+6
| | | | | | | | | | | | | [ Upstream commit 150085791afb8054e11d2e080d4b9cd755dd7f69 ] In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has been set to return value of tls_complete_pending_work(). This allows return of proper error code if tls_complete_pending_work() fails. Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rxrpc: Fix local refcountingDavid Howells2019-08-291-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 68553f1a6f746bf860bce3eb42d78c26a717d9c0 ] Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called on an unbound socket on which rx->local is not yet set. The following reproduced (includes omitted): int main(void) { socket(AF_RXRPC, SOCK_DGRAM, AF_INET); return 0; } causes the following oops to occur: BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:rxrpc_unuse_local+0x8/0x1b ... Call Trace: rxrpc_release+0x2b5/0x338 __sock_release+0x37/0xa1 sock_close+0x14/0x17 __fput+0x115/0x1e9 task_work_run+0x72/0x98 do_exit+0x51b/0xa7a ? __context_tracking_exit+0x4e/0x10e do_group_exit+0xab/0xab __x64_sys_exit_group+0x14/0x17 do_syscall_64+0x89/0x1d4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix local endpoint replacementDavid Howells2019-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b00df840fb4004b7087940ac5f68801562d0d2de ] When a local endpoint (struct rxrpc_local) ceases to be in use by any AF_RXRPC sockets, it starts the process of being destroyed, but this doesn't cause it to be removed from the namespace endpoint list immediately as tearing it down isn't trivial and can't be done in softirq context, so it gets deferred. If a new socket comes along that wants to bind to the same endpoint, a new rxrpc_local object will be allocated and rxrpc_lookup_local() will use list_replace() to substitute the new one for the old. Then, when the dying object gets to rxrpc_local_destroyer(), it is removed unconditionally from whatever list it is on by calling list_del_init(). However, list_replace() doesn't reset the pointers in the replaced list_head and so the list_del_init() will likely corrupt the local endpoints list. Fix this by using list_replace_init() instead. Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix read-after-free in rxrpc_queue_local()David Howells2019-08-291-9/+10
| | | | | | | | | | | | | | | | | | | | commit 06d9532fa6b34f12a6d75711162d47c17c1add72 upstream. rxrpc_queue_local() attempts to queue the local endpoint it is given and then, if successful, prints a trace line. The trace line includes the current usage count - but we're not allowed to look at the local endpoint at this point as we passed our ref on it to the workqueue. Fix this by reading the usage count before queuing the work item. Also fix the reading of local->debug_id for trace lines, which must be done with the same consideration as reading the usage count. Fixes: 09d2bf595db4 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting") Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rxrpc: Fix local endpoint refcountingDavid Howells2019-08-294-39/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 730c5fd42c1e3652a065448fd235cb9fafb2bd10 upstream. The object lifetime management on the rxrpc_local struct is broken in that the rxrpc_local_processor() function is expected to clean up and remove an object - but it may get requeued by packets coming in on the backing UDP socket once it starts running. This may result in the assertion in rxrpc_local_rcu() firing because the memory has been scheduled for RCU destruction whilst still queued: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:468! Note that if the processor comes around before the RCU free function, it will just do nothing because ->dead is true. Fix this by adding a separate refcount to count active users of the endpoint that causes the endpoint to be destroyed when it reaches 0. The original refcount can then be used to refcount objects through the work processor and cause the memory to be rcu freed when that reaches 0. Fixes: 4f95dd78a77e ("rxrpc: Rework local endpoint management") Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* libceph: fix PG split vs OSD (re)connect raceIlya Dryomov2019-08-291-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a561372405cf6bc6f14239b3a9e57bb39f2788b0 upstream. We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: stable@vger.kernel.org Fixes: 7de030d6b10a ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162 Reported-by: Jerry Lee <leisurelysw24@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Jerry Lee <leisurelysw24@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rxrpc: Fix the lack of notification when sendmsg() fails on a DATA packetDavid Howells2019-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c69565ee6681e151e2bb80502930a16e04b553d1 ] Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d752c7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* rxrpc: Fix potential deadlockDavid Howells2019-08-293-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 60034d3d146b11922ab1db613bce062dddc0327a ] There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfadcee ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ipset: Fix rename concurrency with listingJozsef Kadlecsik2019-08-291-1/+1
| | | | | | | | | | | | | | | | [ Upstream commit 6c1f7e2c1b96ab9b09ac97c4df2bd9dc327206f6 ] Shijie Luo reported that when stress-testing ipset with multiple concurrent create, rename, flush, list, destroy commands, it can result ipset <version>: Broken LIST kernel message: missing DATA part! error messages and broken list results. The problem was the rename operation was not properly handled with respect of listing. The patch fixes the issue. Reported-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ipset: Copy the right MAC address in bitmap:ip,mac and ↵Stefano Brivio2019-08-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hash:ip,mac sets [ Upstream commit 1b4a75108d5bc153daf965d334e77e8e94534f96 ] In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the KADT functions for sets matching on MAC addreses the copy of source or destination MAC address depending on the configured match. This was done correctly for hash:mac, but for hash:ip,mac and bitmap:ip,mac, copying and pasting the same code block presents an obvious problem: in these two set types, the MAC address is the second dimension, not the first one, and we are actually selecting the MAC address depending on whether the first dimension (IP address) specifies source or destination. Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags. This way, mixing source and destination matches for the two dimensions of ip,mac set types works as expected. With this setup: ip netns add A ip link add veth1 type veth peer name veth2 netns A ip addr add 192.0.2.1/24 dev veth1 ip -net A addr add 192.0.2.2/24 dev veth2 ip link set veth1 up ip -net A link set veth2 up dst=$(ip netns exec A cat /sys/class/net/veth2/address) ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16 ip netns exec A ipset add test_bitmap 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP ip netns exec A ipset create test_hash hash:ip,mac ip netns exec A ipset add test_hash 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP ipset correctly matches a test packet: # ping -c1 192.0.2.2 >/dev/null # echo $? 0 Reported-by: Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ipset: Actually allow destination MAC address for hash:ip,mac ↵Stefano Brivio2019-08-291-4/+0
| | | | | | | | | | | | | | | | | | | | sets too [ Upstream commit b89d15480d0cacacae1a0fe0b3da01b529f2914f ] In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the KADT check that prevents matching on destination MAC addresses for hash:mac sets, but forgot to remove the same check for hash:ip,mac set. Drop this check: functionality is now commented in man pages and there's no reason to restrict to source MAC address matching anymore. Reported-by: Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* can: gw: Fix error path of cgw_module_initYueHaibing2019-08-291-15/+33
| | | | | | | | | | | | | [ Upstream commit b7a14297f102b6e2ce6f16feffebbb9bde1e9b55 ] This patch add error path for cgw_module_init to avoid possible crash if some error occurs. Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* netfilter: ebtables: fix a memory leak bug in compatWenwen Wang2019-08-291-1/+3
| | | | | | | | | | | | | | | | | | | [ Upstream commit 15a78ba1844a8e052c1226f930133de4cef4e7ad ] In compat_do_replace(), a temporary buffer is allocated through vmalloc() to hold entries copied from the user space. The buffer address is firstly saved to 'newinfo->entries', and later on assigned to 'entries_tmp'. Then the entries in this temporary buffer is copied to the internal kernel structure through compat_copy_entries(). If this copy process fails, compat_do_replace() should be terminated. However, the allocated temporary buffer is not freed on this path, leading to a memory leak. To fix the bug, free the buffer before returning from compat_do_replace(). Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* tipc: initialise addr_trail_end when setting node addressesChris Packham2019-08-251-0/+1
| | | | | | | | | | | | | | [ Upstream commit 8874ecae2977e5a2d4f0ba301364435b81c05938 ] We set the field 'addr_trial_end' to 'jiffies', instead of the current value 0, at the moment the node address is initialized. This guarantees we don't inadvertently enter an address trial period when the node address is explicitly set by the user. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix the transport error_count checkXin Long2019-08-251-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit a1794de8b92ea6bc2037f445b296814ac826693e ] As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix memleak in sctp_send_reset_streamszhengbin2019-08-251-0/+1
| | | | | | | | | | | | | | [ Upstream commit 6d5afe20397b478192ed8c38ec0ee10fa3aec649 ] If the stream outq is not empty, need to kfree nstr_list. Fixes: d570a59c5b5f ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/packet: fix race in tpacket_snd()Eric Dumazet2019-08-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 32d3182cd2cd29b2e7e04df7b0db350fbe11289f ] packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: dsa: Check existence of .port_mdb_add callback before calling itChen-Yu Tsai2019-08-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 58799865be84e2a895dab72de0e1b996ed943f22 ] The dsa framework has optional .port_mdb_{prepare,add,del} callback fields for drivers to handle multicast database entries. When adding an entry, the framework goes through a prepare phase, then a commit phase. Drivers not providing these callbacks should be detected in the prepare phase. DSA core may still bypass the bridge layer and call the dsa_port_mdb_add function directly with no prepare phase or no switchdev trans object, and the framework ends up calling an undefined .port_mdb_add callback. This results in a NULL pointer dereference, as shown in the log below. The other functions seem to be properly guarded. Do the same for .port_mdb_add in dsa_switch_mdb_add_bitmap() as well. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] SMP ARM Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1 Hardware name: Allwinner sun7i (A20) Family Workqueue: events switchdev_deferred_process_work PC is at 0x0 LR is at dsa_switch_event+0x570/0x620 pc : [<00000000>] lr : [<c08533ec>] psr: 80070013 sp : ee871db8 ip : 00000000 fp : ee98d0a4 r10: 0000000c r9 : 00000008 r8 : ee89f710 r7 : ee98d040 r6 : ee98d088 r5 : c0f04c48 r4 : ee98d04c r3 : 00000000 r2 : ee89f710 r1 : 00000008 r0 : ee98d040 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6deb406a DAC: 00000051 Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval)) Stack: (0xee871db8 to 0xee872000) 1da0: ee871e14 103ace2d 1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000 1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0 1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000 1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff 1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4 1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500 1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000 1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8 1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122 1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec 1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc 1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00 1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000 1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4 1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000 1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014bef0>] (raw_notifier_call_chain+0x18/0x20) [<c014bef0>] (raw_notifier_call_chain) from [<c08509a8>] (dsa_port_mdb_add+0x48/0x74) [<c08509a8>] (dsa_port_mdb_add) from [<c087e248>] (__switchdev_handle_port_obj_add+0x54/0xd4) [<c087e248>] (__switchdev_handle_port_obj_add) from [<c087e2d0>] (switchdev_handle_port_obj_add+0x8/0x14) [<c087e2d0>] (switchdev_handle_port_obj_add) from [<c08523c4>] (dsa_slave_switchdev_blocking_event+0x94/0xa4) [<c08523c4>] (dsa_slave_switchdev_blocking_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014c500>] (blocking_notifier_call_chain+0x50/0x68) [<c014c500>] (blocking_notifier_call_chain) from [<c087dfb4>] (switchdev_port_obj_notify+0x44/0xa8) [<c087dfb4>] (switchdev_port_obj_notify) from [<c087e0a8>] (switchdev_port_obj_add_now+0x90/0x104) [<c087e0a8>] (switchdev_port_obj_add_now) from [<c087e130>] (switchdev_port_obj_add_deferred+0x14/0x5c) [<c087e130>] (switchdev_port_obj_add_deferred) from [<c087de4c>] (switchdev_deferred_process+0x64/0x104) [<c087de4c>] (switchdev_deferred_process) from [<c087def8>] (switchdev_deferred_process_work+0xc/0x14) [<c087def8>] (switchdev_deferred_process_work) from [<c01447dc>] (process_one_work+0x218/0x50c) [<c01447dc>] (process_one_work) from [<c0145b84>] (worker_thread+0x44/0x5bc) [<c0145b84>] (worker_thread) from [<c014a6f8>] (kthread+0x148/0x150) [<c014a6f8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee871fb0 to 0xee871ff8) 1fa0: 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: bad PC value ---[ end trace 1292c61abd17b130 ]--- [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) corresponds to $ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec linux/net/dsa/switch.c:156 linux/net/dsa/switch.c:178 linux/net/dsa/switch.c:328 Fixes: e6db98db8a95 ("net: dsa: add switch mdb bitmap functions") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: conntrack: Use consistent ct id hash calculationDirk Morris2019-08-251-8/+8
| | | | | | | | | | | | | | | | | | | | | | | commit 656c8e9cc1badbc18eefe6ba01d33ebbcae61b9a upstream. Change ct id hash calculation to only use invariants. Currently the ct id hash calculation is based on some fields that can change in the lifetime on a conntrack entry in some corner cases. The current hash uses the whole tuple which contains an hlist pointer which will change when the conntrack is placed on the dying list resulting in a ct id change. This patch also removes the reply-side tuple and extension pointer from the hash calculation so that the ct id will will not change from initialization until confirmation. Fixes: 3c79107631db1f7 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Signed-off-by: Dirk Morris <dmorris@metaloft.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* netfilter: ebtables: also count base chain policiesFlorian Westphal2019-08-251-11/+17
| | | | | | | | | | | | | | | | | | | commit 3b48300d5cc7c7bed63fddb006c4046549ed4aec upstream. ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mac80211: don't WARN on short WMM parameters from APBrian Norris2019-08-161-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream. In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-22 22:23:16 +0000