summaryrefslogtreecommitdiffstats
path: root/sound/usb
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: usb-audio: Stop parsing channels bits when all channels are found.Johan Carlsson2024-03-261-1/+4
| | | | | | | | | | | | | [ Upstream commit a39d51ff1f52cd0b6fe7d379ac93bd8b4237d1b7 ] If a usb audio device sets more bits than the amount of channels it could write outside of the map array. Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering> Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Add support for Mythware XA001AU capture and playback ↵dengxiang2023-08-301-0/+29
| | | | | | | | | | | | | | interfaces. commit 788449ae57f4273111b779bbcaad552b67f517d5 upstream. This patch adds a USB quirk for Mythware XA001AU USB interface. Signed-off-by: dengxiang <dengxiang@nfschina.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230803024437.370069-1-dengxiang@nfschina.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* treewide: Remove uninitialized_var() usageKees Cook2023-08-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: caiaq: input: Add error handling for unsupported input methods in ↵Ruliang Lin2023-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | `snd_usb_caiaq_input_init` [ Upstream commit 0d727e1856ef22dd9337199430258cb64cbbc658 ] Smatch complains that: snd_usb_caiaq_input_init() warn: missing error code 'ret' This patch adds a new case to handle the situation where the device does not support any input methods in the `snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code to indicate that no input methods are supported on the device. Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support") Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Fix regression on detection of Roland VS-100Takashi Iwai2023-04-051-2/+6
| | | | | | | | | | | | | | | | | | | | | commit fa4e7a6fa12b1132340785e14bd439cbe95b7a5a upstream. It's been reported that the recent kernel can't probe the PCM devices on Roland VS-100 properly, and it turned out to be a regression by the recent addition of the bit shift range check for the format bits. In the old code, we just did bit-shift and it resulted in zero, which is then corrected to the standard PCM format, while the new code explicitly returns an error in such a case. For addressing the regression, relax the check and fallback to the standard PCM type (with the info output). Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084 Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: line6: fix stack overflow in line6_midi_transmitArtem Egorkine2023-01-181-1/+2
| | | | | | | | | | | | | | commit b8800d324abb50160560c636bfafe2c81001b66c upstream. Correctly calculate available space including the size of the chunk buffer. This fixes a buffer overflow when multiple MIDI sysex messages are sent to a PODxt device. Signed-off-by: Artem Egorkine <arteme@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221225105728.1153989-2-arteme@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: line6: correct midi status byte when receiving data from podxtArtem Egorkine2023-01-185-12/+27
| | | | | | | | | | | | | | | | | | commit 8508fa2e7472f673edbeedf1b1d2b7a6bb898ecc upstream. A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0 status byte. This is usually corrected by the driver on other OSes. This fixes MIDI sysex messages sent by PODxt. [ tiwai: fixed white spaces ] Signed-off-by: Artem Egorkine <arteme@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221225105728.1153989-1-arteme@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()Takashi Iwai2022-11-251-3/+1
| | | | | | | | | | | | | | | | | | | commit ad72c3c3f6eb81d2cb189ec71e888316adada5df upstream. snd_usbmidi_output_open() has a check of the NULL port with snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened, but in reality, the NULL port may be seen when the device gives an invalid endpoint setup at the descriptor, hence the driver skips the allocation. That is, the check itself is valid and snd_BUG_ON() should be dropped from there. Otherwise it's confusing as if it were a real bug, as recently syzbot stumbled on it. Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add DSD support for Accuphase DAC-60Jussi Laako2022-11-251-0/+1
| | | | | | | | | | | | | | commit 8cbd4725ffff3eface1f5f3397af02acad5b2831 upstream. Accuphase DAC-60 option card supports native DSD up to DSD256, but doesn't have support for auto-detection. Explicitly enable DSD support for the correct altsetting. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add quirk entry for M-Audio MicroTakashi Iwai2022-11-251-0/+4
| | | | | | | | | | | | | | | commit 2f01a612d4758b45f775dbb88a49cf534ba47275 upstream. M-Audio Micro (0762:201a) defines the descriptor as vendor-specific, while the content seems class-compliant. Just overriding the probe makes the device working. Reported-by: Ash Logan <ash@heyquark.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/7ecd4417-d860-4773-c1c1-b07433342390@heyquark.com Link: https://lore.kernel.org/r/20221108140721.24248-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devicesJohn Veness2022-11-102-0/+59
| | | | | | | | | | | | | commit 6e2c9105e0b743c92a157389d40f00b81bdd09fe upstream. Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by: John Veness <john-linux@pelago.org.uk> Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix NULL dererence at error pathTakashi Iwai2022-10-261-1/+2
| | | | | | | | | | | | | | | | | | commit 568be8aaf8a535f79c4db76cabe17b035aa2584d upstream. At an error path to release URB buffers and contexts, the driver might hit a NULL dererence for u->urb pointer, when u->buffer_size has been already set but the actual URB allocation failed. Fix it by adding the NULL check of urb. Also, make sure that buffer_size is cleared after the error path or the close. Cc: <stable@vger.kernel.org> Reported-by: Sabri N. Ferreiro <snferreiro1@gmail.com> Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix potential memory leaksTakashi Iwai2022-10-261-2/+1
| | | | | | | | | | | | | | | | | | commit 6382da0828995af87aa8b8bef28cc61aceb4aff3 upstream. When the driver hits -ENOMEM at allocating a URB or a buffer, it aborts and goes to the error path that releases the all previously allocated resources. However, when -ENOMEM hits at the middle of the sync EP URB allocation loop, the partially allocated URBs might be left without released, because ep->nurbs is still zero at that point. Fix it by setting ep->nurbs at first, so that the error handler loops over the full URB list. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()Dongxiang Ke2022-09-151-1/+1
| | | | | | | | | | | | | | | commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf upstream. There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com> Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: bcd2000: Fix a UAF bug on the error path of probingZheyu Ma2022-08-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | commit ffb2759df7efbc00187bfd9d1072434a13a54139 upstream. When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb(). Fixes: b47a22290d58 ("ALSA: MIDI driver for Behringer BCD2000 USB device") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220715010515.2087925-1-zheyuma97@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix undefined behavior due to shift overflowing the constantBorislav Petkov2022-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1ef8715975de8bd481abbd0839ed4f49d9e5b0ff ] Fix: sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’: sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */ ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. [ A slight correction with parentheses around the argument by tiwai ] Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220405151517.29753-3-bp@alien8.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Clear MIDI port active flag after drainingTakashi Iwai2022-04-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 0665886ad1392e6b5bae85d7a6ccbed48dca1522 upstream. When a rawmidi output stream is closed, it calls the drain at first, then does trigger-off only when the drain returns -ERESTARTSYS as a fallback. It implies that each driver should turn off the stream properly after the drain. Meanwhile, USB-audio MIDI interface didn't change the port->active flag after the drain. This may leave the output work picking up the port that is closed right now, which eventually leads to a use-after-free for the already released rawmidi object. This patch fixes the bug by properly clearing the port->active flag after the output drain. Reported-by: syzbot+70e777a39907d6d5fd0a@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/00000000000011555605dceaff03@google.com Link: https://lore.kernel.org/r/20220420130247.22062-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add mute TLV for playback volumes on RODE NT-USBLars-Peter Clausen2022-03-281-3/+4
| | | | | | | | | | | | | | | | | commit 0f306cca42fe879694fb5e2382748c43dc9e0196 upstream. For the RODE NT-USB the lowest Playback mixer volume setting mutes the audio output. But it is not reported as such causing e.g. PulseAudio to accidentally mute the device when selecting a low volume. Fix this by applying the existing quirk for this kind of issue when the device is detected. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220311201400.235892-1-lars@metafoo.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add registration quirk for JBL Quantum 400Alexander Tsoy2021-11-261-0/+1
| | | | | | | | | | | | | commit 763d92ed5dece7d439fc28a88b2d2728d525ffd9 upstream. Add another device ID for JBL Quantum 400. It requires the same quirk as other JBL Quantum devices. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: line6: fix control and interrupt message timeoutsJohan Hovold2021-11-264-12/+12
| | | | | | | | | | | | | | commit f4000b58b64344871d7b27c05e73932f137cfef6 upstream. USB control and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025121142.6531-3-johan@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: 6fire: fix control and bulk message timeoutsJohan Hovold2021-11-262-4/+4
| | | | | | | | | | | | | | commit 9b371c6cc37f954360989eec41c2ddc5a6b83917 upstream. USB control and bulk message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB") Cc: stable@vger.kernel.org # 2.6.39 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025121142.6531-2-johan@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: ua101: fix division by zero at probeJohan Hovold2021-11-261-2/+2
| | | | | | | | | | | | | | | | | | | | commit 55f261b73a7e1cb254577c3536cef8f415de220a upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in alloc_stream_buffers() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Cc: stable@vger.kernel.org # 2.6.34 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211026095401.26522-1-johan@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Provide quirk for Sennheiser GSP670 HeadsetBrendan Grieve2021-10-271-0/+32
| | | | | | | | | | | | | | | | | | | commit 3c414eb65c294719a91a746260085363413f91c1 upstream. As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13 The GSP670 has 2 playback and 1 recording device that by default are detected in an incompatible order for alsa. This may have been done to make it compatible for the console by the manufacturer and only affects the latest firmware which uses its own ID. This quirk will resolve this by reordering the channels. Signed-off-by: Brendan Grieve <brendan@grieve.com.au> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add registration quirk for JBL Quantum 800Alexander Tsoy2021-09-221-0/+1
| | | | | | | | | | | | | commit c8b177b6e3a005bd8fb0395a4bc5db3470301c28 upstream. Add another device ID for JBL Quantum 800. It requires the same quirk as other JBL Quantum devices. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210831002531.116957-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add registration quirk for JBL Quantum 600Alexander Tsoy2021-08-121-0/+1
| | | | | | | | | | | | | commit 4b0556b96e1fe7723629bd40e3813a30cd632faf upstream. Apparently JBL Quantum 600 has multiple hardware revisions. Apply registration quirk to another device id as well. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210727093326.1153366-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: fix incorrect clock source settingchihhao.chen2021-08-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4511781f95da0a3b2bad34f3f5e3967e80cd2d18 ] The following scenario describes an echo test for Samsung USBC Headset (AKG) with VID/PID (0x04e8/0xa051). We first start a capture stream(USB IN transfer) in 96Khz/24bit/1ch mode. In clock find source function, we get value 0x2 for clock selector and 0x1 for clock source. Kernel-4.14 behavior Since clock source is valid so clock selector was not set again. We pass through this function and start a playback stream(USB OUT transfer) in 48Khz/32bit/2ch mode. This time we get value 0x1 for clock selector and 0x1 for clock source. Finally clock id with this setting is 0x9. Kernel-5.10 behavior Clock selector was always set one more time even it is valid. When we start a playback stream, we will get 0x2 for clock selector and 0x1 for clock source. In this case clock id becomes 0xA. This is an incorrect clock source setting and results in severe noises. We see wrong data rate in USB IN transfer. (From 288 bytes/ms becomes 144 bytes/ms) It should keep in 288 bytes/ms. This earphone works fine on older kernel version load because this is a newly-added behavior. Fixes: d2e8f641257d ("ALSA: usb-audio: Explicitly set up the clock selector") Signed-off-by: chihhao.chen <chihhao.chen@mediatek.com> Link: https://lore.kernel.org/r/1627100621-19225-1-git-send-email-chihhao.chen@mediatek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Add registration quirk for JBL Quantum headsetsAlexander Tsoy2021-07-281-0/+3
| | | | | | | | | | | | | | | commit b0084afde27fe8a504377dee65f55bc6aa776937 upstream. These devices has two interfaces, but only the second interface contains the capture endpoint, thus quirk is required to delay the registration until the second interface appears. Tested-by: Jakub Fišer <jakub@ufiseru.cz> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210721235605.53741-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix OOB access at proc outputTakashi Iwai2021-07-201-2/+3
| | | | | | | | | | | | | | | commit 362372ceb6556f338e230f2d90af27b47f82365a upstream. At extending the available mixer values for 32bit types, we forgot to add the corresponding entries for the format dump in the proc output. This may result in OOB access. Here adds the missing entries. Fixes: bc18e31c3042 ("ALSA: usb-audio: Fix parameter block size for UAC2 control requests") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210622090647.14021-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: fix rate on Ozone Z90 USB headsetDaehwan Jung2021-07-201-0/+2
| | | | | | | | | | | | | commit aecc19ec404bdc745c781058ac97a373731c3089 upstream. It mislabels its 96 kHz altsetting and that's why it causes some noise Signed-off-by: Daehwan Jung <dh10.jung@samsung.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1623836097-61918-1-git-send-email-dh10.jung@samsung.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb: update old-style static const declarationPierre-Louis Bossart2021-06-101-1/+1
| | | | | | | | | | | | | | | | | | | [ Upstream commit ff40e0d41af19e36b43693fcb9241b4a6795bb44 ] GCC reports the following warning with W=1 sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’: sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] 1694 | const static usb_mixer_elem_resume_func_t resume_funcs[] = { | ^~~~~ Move static to the beginning of declaration Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200111214736.3002-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Validate MS endpoint descriptorsTakashi Iwai2021-05-261-0/+4
| | | | | | | | | | | | | | commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream. snd_usbmidi_get_ms_info() may access beyond the border when a malformed descriptor is passed. This patch adds the sanity checks of the given MS endpoint descriptors, and skips invalid ones. Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: line6: Fix racy initialization of LINE6 MIDITakashi Iwai2021-05-263-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream. The initialization of MIDI devices that are found on some LINE6 drivers are currently done in a racy way; namely, the MIDI buffer instance is allocated and initialized in each private_init callback while the communication with the interface is already started via line6_init_cap_control() call before that point. This may lead to Oops in line6_data_received() when a spurious event is received, as reported by syzkaller. This patch moves the MIDI initialization to line6_init_cap_control() as well instead of the too-lately-called private_init for avoiding the race. Also this reduces slightly more lines, so it's a win-win change. Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb: midi: don't return -ENOMEM when usb_urb_ep_type_check failsColin Ian King2021-05-221-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit cfd577acb769301b19c31361d45ae1f145318b7a ] Currently when the call to usb_urb_ep_type_check fails (returning -EINVAL) the error return path returns -ENOMEM via the exit label "error". Other uses of the same error exit label set the err variable to -ENOMEM but this is not being used. I believe the original intent was for the error exit path to return the value in err rather than the hard coded -ENOMEM, so return this rather than the hard coded -ENOMEM. Addresses-Coverity: ("Unused value") Fixes: 738d9edcfd44 ("ALSA: usb-audio: Add sanity checks for invalid EPs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210420134719.381409-1-colin.king@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Add error checks for usb_driver_claim_interface() callsTakashi Iwai2021-05-223-11/+21
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5fb45414ae03421255593fd5556aa2d1d82303aa ] There are a few calls of usb_driver_claim_interface() but all of those miss the proper error checks, as reported by Coverity. This patch adds those missing checks. Along with it, replace the magic pointer with -1 with a constant USB_AUDIO_IFACE_UNUSED for better readability. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1475943 ("Error handling issues") Addresses-Coverity-ID: 1475944 ("Error handling issues") Addresses-Coverity-ID: 1475945 ("Error handling issues") Fixes: b1ce7ba619d9 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once") Fixes: e5779998bf8b ("ALSA: usb-audio: refactor code") Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
* ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8Timo Gurr2021-05-221-0/+12
| | | | | | | | | | | | | | | | | | commit ab2165e2e6ed17345ffa8ee88ca764e8788ebcd7 upstream. The decibel volume range contains a negative maximum value resulting in pipewire complaining about the device and effectivly having no sound output. The wrong values also resulted in the headset sounding muted already at a mixer level of about ~25%. PipeWire BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1049 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212897 Signed-off-by: Timo Gurr <timo.gurr@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503110822.10222-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: More constificationsTakashi Iwai2021-05-227-73/+73
| | | | | | | | | | | | | commit a01df925d1bbc97d6f7fe07b157aadb565315337 upstream. Apply const prefix to the remaining places: the static table for the unit information, the mixer maps, the validator tables, etc. Just for minor optimization and no functional changes. Link: https://lore.kernel.org/r/20200105144823.29547-12-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Explicitly set up the clock selectorTakashi Iwai2021-05-221-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964 upstream. In the current code, we have some assumption that the audio clock selector has been set up implicitly and don't want to touch it unless it's really needed for the fallback autoclock setup. This works for most devices but some seem having a problem. Partially this was covered for the devices with a single connector at the initialization phase (commit 086b957cc17f "ALSA: usb-audio: Skip the clock selector inquiry for single connections"), but also there are cases where the wrong clock set up is kept silently. The latter seems to be the cause of the noises on Behringer devices. In this patch, we explicitly set up the audio clock selector whenever the appropriate node is found. Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199327 Link: https://lore.kernel.org/r/CAEsQvcvF7LnO8PxyyCxuRCx=7jNeSCvFAd-+dE0g_rd1rOxxdw@mail.gmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210413084152.32325-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EXTakashi Iwai2021-05-071-0/+10
| | | | | | | | | | | | | commit 64f40f9be14106e7df0098c427cb60be645bddb7 upstream. ToneLab EX guitar pedal device requires the same quirk like ToneLab ST for supporting the MIDI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Apply sample rate quirk to Logitech ConnectIkjoon Jang2021-04-071-0/+1
| | | | | | | | | | | | | | | | | commit 625bd5a616ceda4840cd28f82e957c8ced394b6a upstream. Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request. This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Apply the control quirk to Plantronics headsetsTakashi Iwai2021-03-171-3/+3
| | | | | | | | | | | | | | | | | | | commit 06abcb18b3a021ba1a3f2020cbefb3ed04e59e72 upstream. Other Plantronics headset models seem requiring the same workaround as C320-M to add the 20ms delay for the control messages, too. Apply the workaround generically for devices with the vendor ID 0x047f. Note that the problem didn't surface before 5.11 just with luck. Since 5.11 got a big code rewrite about the stream handling, the parameter setup procedure has changed, and this seemed triggering the problem more often. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1182552 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210304085009.4770-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound barTakashi Iwai2021-03-171-0/+1
| | | | | | | | | | | | | | commit fec60c3bc5d1713db2727cdffc638d48f9c07dc3 upstream. Dell AE515 sound bar (413c:a506) spews the error messages when the driver tries to read the current sample frequency, hence it needs to be on the list in snd_usb_get_sample_rate_quirk(). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211551 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210304083021.2152-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirkJohn Ernberg2021-03-171-0/+8
| | | | | | | | | | | | | | | | | commit fc7c5c208eb7bc2df3a9f4234f14eca250001cb6 upstream. The microphone in the Plantronics C320-M headset will randomly fail to initialize properly, at least when using Microsoft Teams. Introducing a 20ms delay on the control messages appears to resolve the issue. Link: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1065 Tested-by: Andreas Kempe <kempe@lysator.liu.se> Signed-off-by: John Ernberg <john.ernberg@actia.se> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210303181405.39835-1-john.ernberg@actia.se Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix PCM buffer allocation in non-vmalloc modeTakashi Iwai2021-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | commit fb3c293b82c31a9a68fbcf4e7a45fadd8a47ea2b upstream. The commit f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers") introduced the mode to allocate coherent pages for PCM buffers, and it used bus->controller device as its DMA device. It turned out, however, that bus->sysdev is a more appropriate device to be used for DMA mapping in HCD code. This patch corrects the device reference accordingly. Note that, on most platforms, both point to the very same device, hence this patch doesn't change anything practically. But on platforms like xhcd-plat hcd, the change becomes effective. Fixes: f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix UBSAN warnings for MIDI jacksTakashi Iwai2021-01-121-0/+4
| | | | | | | | | | | | | | | | | | commit c06ccf3ebb7503706ea49fd248e709287ef385a3 upstream. The calculation of in_cables and out_cables bitmaps are done with the bit shift by the value from the descriptor, which is an arbitrary value, and can lead to UBSAN shift-out-of-bounds warnings. Fix it by filtering the bad descriptor values with the check of the upper bound 0x10 (the cable bitmaps are 16 bits). Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Disable sample read check if firmware doesn't give backTakashi Iwai2020-12-301-0/+6
| | | | | | | | | | | | | | commit 9df28edce7c6ab38050235f6f8b43dd7ccd01b6d upstream. Some buggy firmware don't give the current sample rate but leaves zero. Handle this case more gracefully without warning but just skip the current rate verification from the next time. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add VID to support native DSD reproduction on FiiO devicesAmadej Kastelic2020-12-301-0/+1
| | | | | | | | | | | | | | | commit 725124d10d00b2f56bb5bd08b431cc74ab3b3ace upstream. Add VID to support native DSD reproduction on FiiO devices. Tested-by: Amadej Kastelic <amadejkastelic7@gmail.com> Signed-off-by: Emilio Moretti <emilio.moretti@gmail.com> Signed-off-by: Amadej Kastelic <amadejkastelic7@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/X9j7wdXSr4XyK7Bd@ryzen.localdomain Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix control 'access overflow' errors from chmapTakashi Iwai2020-12-301-3/+3
| | | | | | | | | | | | | | | | | | | | commit c6dde8ffd071aea9d1ce64279178e470977b235c upstream. The current channel-map control implementation in USB-audio driver may lead to an error message like "control 3:0:0:Playback Channel Map:0: access overflow" when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get callback clears the whole array no matter which count is set, and rather the false-positive detection. This patch fixes the problem by clearing only the needed array range at usb_chmap_ctl_get(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix potential out-of-bounds shiftTakashi Iwai2020-12-301-0/+2
| | | | | | | | | | | | | | | | | commit 43d5ca88dfcd35e43010fdd818e067aa9a55f5ba upstream. syzbot spotted a potential out-of-bounds shift in the USB-audio format parser that receives the arbitrary shift value from the USB descriptor. Add a range check for avoiding the undefined behavior. Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: US16x08: fix value count for level metersHector Martin2020-12-081-1/+1
| | | | | | | | | | | | | | | | commit 402d5840b0d40a2a26c8651165d29b534abb6d36 upstream. The level meter control returns 34 integers of info. This fixes: snd-usb-audio 3-1:1.0: control 2:0:0:Level Meter:0: access overflow Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20201127132635.18947-1-marcan@marcan.st Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Add delay quirk for all Logitech USB devicesJoakim Tjernlund2020-11-241-5/+5
| | | | | | | | | | | | | | | | commit 54a2a3898f469a915510038fe84ef4f083131d3e upstream. Found one more Logitech device, BCC950 ConferenceCam, which needs the same delay here. This makes 3 out of 3 devices I have tried. Therefore, add a delay for all Logitech devices as it does not hurt. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> # 4.19.y, 5.4.y Link: https://lore.kernel.org/r/20201117122803.24310-1-joakim.tjernlund@infinera.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-27 08:50:56 +0000