summaryrefslogtreecommitdiffstats
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - Add PCI ID for KabylakeVinod Koul2016-06-091-1/+10
| | | | | | | | | Kabylake shows up as PCI ID 0xa171. And Kabylake-LP as 0x9d71. Since these are similar to Skylake add these to SKL_PLUS macro Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek: Add T560 docking unit fixupTorsten Hilbrich2016-06-071-0/+1
| | | | | | | | | | Tested with Lenovo Ultradock. Fixes the non-working headphone jack on the docking unit. Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda - Fix headset mic detection problem for Dell machineAceLan Kao2016-06-031-0/+4
| | | | | | | | | Add the pin configuration value of this machine into the pin_quirk table to make DELL1_MIC_NO_PRESENCE apply to this machine. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703Kailang Yang2016-05-301-0/+16
| | | | | | | | Support new codecs for ALC700/ALC701/ALC703. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: hda/realtek - ALC256 speaker noise issueKailang Yang2016-05-301-5/+47
| | | | | | | | | | | That is some different register for ALC255 and ALC256. ALC256 can't fit with some ALC255 register. This issue is cause from LDO output voltage control. This patch is updated the right LDO register value. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'sound-4.7-rc1-2' of ↵Linus Torvalds2016-05-2847-317/+2652
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ...
| * Merge tag 'asoc-v4.7-2' of ↵Takashi Iwai2016-05-2746-317/+2638
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.7 part 2 Really sorry about this late pull request. It looks like at the time I sent my pull request for v4.7 there was some conflict or other issue which caused my script to stop merging the ASoC branches at some point after the HDMI changes. It's all specific driver updates, including: - New drivers for MAX98371 and TAS5720. - SPI support for TLV320AIC32x4. - TDM support for STI Uniperf IPs. This code should all have been in -next prior to the merge window apart from some fixes, it dropped out on the 18th.
| | * Merge remote-tracking branch 'asoc/topic/wm8962' into asoc-nextMark Brown2016-05-272-6/+9
| | |\
| | | * ASoC: wm8962: Adjust clk definitions so that simple card can workFabio Estevam2016-03-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to use simple card with wm8962 the following probe error happens: wm8962 0-001a: simple-card: set_sysclk error asoc-simple-card sound: ASoC: failed to init 202c000.ssi-wm8962: -22 asoc-simple-card sound: ASoC: failed to instantiate card -22 asoc-simple-card: probe of sound failed with error -22 In simple-card.c the snd_soc_dai_set_sysclk() function is called with clk_id as 0, which is an invalid clock for wm8962. Adjust the clocks source definitions in wm8962.h so that the simple card driver can work successfully. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * ASoC: wm8962: Fit error message into a single lineFabio Estevam2016-03-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error message fits well into a single line. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * ASoC: wm8962: Disable clock if wm8962_runtime_resume() failsFabio Estevam2016-03-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When regulator_bulk_enable() fails inside wm8962_runtime_resume(), we should disable the previously enabled clock. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/rt5677' into asoc-nextMark Brown2016-05-271-19/+5
| | |\ \
| | | * | ASoC: rt5677: Avoid duplicate the same test in each switch caseAxel Lin2016-03-301-19/+5
| | | |/ | | | | | | | | | | | | | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/wm8960' into asoc-nextMark Brown2016-05-271-1/+2
| | |\ \
| | | * | ASoC: wm8960: Depends on I2CMark Brown2016-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that this is directly user selectable it needs to care about its dependencies. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: wm8960: Provide a menu selection textFabio Estevam2016-03-281-1/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a menu selection text so that users can enable, disable or mark it as module in menuconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/qcom' into asoc-nextMark Brown2016-05-271-3/+5
| | |\ \
| | | * | ASoC: qcom: remove IS_ERR_VALUE usage on int.Srinivas Kandagatla2016-03-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IS_ERR_VALUE should be used only with unsigned long type, signed types should use comparison 'ret < 0' This patch removes such usages. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: qcom: Fix uninitialized symbol warning.Srinivas Kandagatla2016-03-311-1/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes following static checker warning, by initializing the ret to -EINVAL, as one of the code path in lpass_platform_pcm_new() uses this variable uninitialized. sound/soc/qcom/lpass-platform.c:555 lpass_platform_pcm_new() error: uninitialized symbol 'ret'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/sti' into asoc-nextMark Brown2016-05-274-129/+646
| | |\ \
| | | * | ASoC: sti: select player for I2S/TDM TX busMoise Gergaud2016-04-182-14/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, player#0 is connected to I2S/TDM TX bus. This patch connects player#1 to I2S/TDM TX bus. Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: unip reader tdm modeMoise Gergaud2016-04-121-61/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here are the changes to enable reader tdm mode: - When TDM_ENABLE is set to 1, the i2s format should be automatically configured. Unfortunately this is not the case (HW bug). Then, we shall force DATA_SIZE setting. - Compute the transfer size for tdm mode: transfer size = user frame size - Manage tdm slots configuration given in DT. - Refine the hw param (channels & format) according to tdm slot config. Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: unip player tdm modeMoise Gergaud2016-04-123-18/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | here are the changes to enable player tdm mode: - When TDM_ENABLE is set to 1, the i2s format should be automatically configured. Unfortunately this is not the case (HW bug). Then, we shall force DATA_SIZE setting. - Compute the transfer size for tdm mode: transfer size = user frame size - Manage tdm slots configuration given in DT. - Don't use mclk-fs when unip in tdm mode; use tdm slot config to compute frame size and to set mclk rate. - Refine the hw param (channels & format) according to tdm slot config. Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: helper functions to fix tdm runtime paramsMoise Gergaud2016-04-122-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: helper functions for unip tdm slots configurationMoise Gergaud2016-04-122-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - sti_uniperiph_set_tdm_slot: store tdm slot config in unip context - sti_uniperiph_get_tdm_word_pos: configure unip tdm slots pos regs Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: define tdm type & default tdm hw configMoise Gergaud2016-04-121-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: rename unip player type into common player & reader typeMoise Gergaud2016-04-122-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: macro for uniperif tdm regs accessMoise Gergaud2016-04-121-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: sti: correct typo errorsMoise Gergaud2016-03-311-11/+11
| | | |/ | | | | | | | | | | | | | | | | | | | | Signed-off-by: Moise Gergaud <moise.gergaud@st.com> Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/tlv320aic31xx' into asoc-nextMark Brown2016-05-271-0/+10
| | |\ \
| | | * | ASoC: tlv320aix31xx: Add ACPI match for Lenovo 100SBastien Nocera2016-04-191-0/+10
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Lenovo 100S netbook has a codec controller for which there is a driver, but doesn't know how to access the device. This adds the necessary ACPI table for the driver to find the device. Device (TTLV) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "10TI3100") // _HID: Hardware ID Name (_CID, "10TI3100") // _CID: Compatible ID Name (_DDN, "TI TLV320AIC3100 Codec Controller ") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Signed-off-by: Bastien Nocera <hadess@hadess.net> Tested-by: Jan Schmidt <jan@centricular.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/kconfig' into asoc-nextMark Brown2016-05-272-6/+6
| | |\ \
| | | * | ASoC: tidyup alphabetical order for SND_SOC_BxxKuninori Morimoto2016-04-222-6/+6
| | | |/ | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/rt298' into asoc-nextMark Brown2016-05-272-28/+25
| | |\ \
| | | * | ASoC: rt298: fix capture doesn't work at some casesBard Liao2016-04-261-28/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RT298_CBJ_CTRL1(0x4f) bit 10 is needed for headset capture. It will be turned off when "VREF" widget is on and be turned on when bias level is ON. It is odd. And if "VREF" is turned on in bias level is ON, RT298_CBJ_CTRL1(0x4f) bit 10 will be turned off. This patch move the bit control from rt298_set_bias_level and rt298_vref_event to rt298_jack_detect. So it will be turned on once a jack is plugged in. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: rt298: reset AD dilter is there is no MCLKBard Liao2016-04-262-0/+22
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | rt298 need to reset AD filter and the ADC settings will take effort. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/mtk' into asoc-nextMark Brown2016-05-274-3/+77
| | |\ \
| | | * | ASoC: mediatek: HDMI audio LR channel swappedPC Liao2016-04-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because LRCK of TDM use High to Low as default setting, this patch changes the TDM setting to inverse LRCK. Signed-off-by: PC Liao <pc.liao@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: mediatek: Add HDMI dai-links in the mt8173-rt5650-rt5676 machine driverKoro Chen2016-04-212-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This creates pcmC0D2p for the HDMI playback in the same card. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: mediatek: Add second I2S on mt8173-rt5650 machine driverPC Liao2016-04-211-3/+47
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds second I2S connection to rt5650 codec for capture path on mt8173-rt5650 machine driver. Signed-off-by: PC Liao <pc.liao@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | Merge remote-tracking branch 'asoc/topic/omap' into asoc-nextMark Brown2016-05-272-0/+10
| | |\ \
| | | * | ASoC: omap-pcm: Initialize DMA configurationJim Lodes2016-04-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize the dma_slave_config for PCM DMA transfers, instead of leaving it uninitialized. Keeps previous data on the stack from giving us invalid values in uninitialized members of the config structure. Signed-off-by: Jim Lodes <jim.lodes@garmin.com> Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | ASoC: omap-mcbsp: Enable/disable sidetone block auto clock gating for omap3Peter Ujfalusi2016-03-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP3's McBSP2 and McBSP3 module have integrated sidetone block with dedicated SYSCONFIG register. The sidetone is operating from the maain McBSP module's ICLK. For normal operation the sidetone clock auto idle support needs to be disabled when it is activated. Note: This is not enough to avoid choppy sidetone because this AUTOIDLE bit is controlling only the clock auto idle from the McBSP to the sidetone block. If the McBSP_ICLK is idling, the sidetone clock is going to do the same. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | Merge remote-tracking branch 'asoc/topic/tas5270' into asoc-nextMark Brown2016-05-276-13/+872
| | |\ \ \
| | | * | | ASoC: add support for TAS5720 digital amplifierAndreas Dannenberg2016-04-274-0/+720
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Texas Instruments TAS5720L/M device is a high-efficiency mono Class-D audio power amplifier optimized for high transient power capability to use the dynamic power headroom of small loudspeakers. Its digital time division multiplexed (TDM) interface enables up to 16 devices to share the same bus. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: tas571x: added support for TAS5721Petr Kulhavy2016-03-312-1/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for TAS5721. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: tas571x: added missing register literalsPetr Kulhavy2016-03-312-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The list of TAS571x registers was incomplete. Added the missing register definitions up to the register 0x25. Added volatile and read-only register tables into tas5711_regmap_config and tas5717_regmap_config. The chip has 256 registers in total. But from address 0x29 on (0x26 to 0x28 are reserved) the register width varies between 20, 12 and 8 bytes, which the register map cannot represent. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: tas571x: chip type detection via I2C namePetr Kulhavy2016-03-301-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The chip selection was relying only on DT. It was not possible to use the driver without DT. This adds the chip type detection from the I2C name, which allows to use the driver from the platform driver without DT. Signed-off-by: Petr Kulhavy <petr@barix.com> Reviewed-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
| | | * | | ASoC: tas571x: implemented digital mutePetr Kulhavy2016-03-291-4/+18
| | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver did not have a mute function. The amplifier was brought out of shutdown mode (hard-mute) once for ever in probe(), which was causing clicks and pops when altering the I2C register configuration later. This adds the digital_mute() function. The amplifier unmute in probe() was removed. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Mark Brown <broonie@kernel.org>
| | * | | Merge remote-tracking branch 'asoc/topic/topology' into asoc-nextMark Brown2016-05-271-3/+45
| | |\ \ \