blob: b0866d36a30741f59937fecfc32e69213b84fa4f (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
Freescale i.MX25 ADC GCQ device
This is a generic conversion queue device that can convert any of the
analog inputs using the ADC unit of the i.MX25.
Required properties:
- compatible: Should be "fsl,imx25-gcq".
- reg: Should be the register range of the module.
- interrupts: Should be the interrupt number of the module.
Typically this is <1>.
- interrupt-parent: phandle to the tsadc module of the i.MX25.
- #address-cells: Should be <1> (setting for the subnodes)
- #size-cells: Should be <0> (setting for the subnodes)
Optional properties:
- vref-ext-supply: The regulator supplying the ADC reference voltage.
Required when at least one subnode uses the this reference.
- vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
Required when at least one subnode uses this reference.
- vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
Required when at least one subnode uses this reference.
Sub-nodes:
Optionally you can define subnodes which define the reference voltage
for the analog inputs.
Required properties for subnodes:
- reg: Should be the number of the analog input.
0: xp
1: yp
2: xn
3: yn
4: wiper
5: inaux0
6: inaux1
7: inaux2
Optional properties for subnodes:
- fsl,adc-refp: specifies the positive reference input as defined in
<dt-bindings/iio/adc/fsl-imx25-gcq.h>
- fsl,adc-refn: specifies the negative reference input as defined in
<dt-bindings/iio/adc/fsl-imx25-gcq.h>
Example:
adc: adc@50030800 {
compatible = "fsl,imx25-gcq";
reg = <0x50030800 0x60>;
interrupt-parent = <&tscadc>;
interrupts = <1>;
#address-cells = <1>;
#size-cells = <0>;
inaux@5 {
reg = <5>;
fsl,adc-refp = <MX25_ADC_REFP_INT>;
fsl,adc-refn = <MX25_ADC_REFN_NGND>;
};
};
|
