blob: 635a3b03663002d8f4eb47b25fd504d2a7ebca93 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
Cypress I2C Touchpad
Required properties:
- compatible: must be "cypress,cyapa".
- reg: I2C address of the chip.
- interrupt-parent: a phandle for the interrupt controller (see interrupt
binding[0]).
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
Optional properties:
- wakeup-source: touchpad can be used as a wakeup source.
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
- vcc-supply: a phandle for the regulator supplying 3.3V power.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
&i2c0 {
/* ... */
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x24>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
};
/* Cypress Gen5 and later touchpad */
touchpad@24 {
compatible = "cypress,cyapa";
reg = <0x24>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
};
/* ... */
};
|
