Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...

78 files changed, 822 insertions, 540 deletions

diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index e4beec3d9ad3..f9ddc05d32f0 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -18,4 +18,5 @@ using one of the following compatible strings:
   allwinner,sun8i-v3s
   allwinner,sun9i-a80
   allwinner,sun50i-a64
+  allwinner,suniv-f1c100s
   nextthing,gr8
diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
index ed11ce0ac836..46055254e8dd 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
 	"allwinner,sun4i-a10-wdt"
 	"allwinner,sun6i-a31-wdt"
 	"allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt"
+	"allwinner,suniv-f1c100s-wdt", "allwinner,sun4i-a10-wdt"
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
diff --git a/MAINTAINERS b/MAINTAINERS
index 7d37f8a4743c..046dad9636e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1306,7 +1306,6 @@ F:	include/dt-bindings/clock/gxbb*
 F:	Documentation/devicetree/bindings/clock/amlogic*
 
 ARM/Amlogic Meson SoC support
-M:	Carlo Caione <carlo@caione.org>
 M:	Kevin Hilman <khilman@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-amlogic@lists.infradead.org
@@ -1317,6 +1316,7 @@ F:	arch/arm/boot/dts/meson*
 F:	arch/arm64/boot/dts/amlogic/
 F:	drivers/pinctrl/meson/
 F:	drivers/mmc/host/meson*
+F:	drivers/soc/amlogic/
 N:	meson
 
 ARM/Amlogic Meson SoC Sound Drivers
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d6a49f59ecd9..6d6e0330930b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1087,14 +1087,21 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
-	config DEBUG_SOCFPGA_UART1
+	config DEBUG_SOCFPGA_ARRIA10_UART1
 		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART1 for low-level debug"
+		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Arria 10) based platforms.
 
+	config DEBUG_SOCFPGA_CYCLONE5_UART1
+		depends on ARCH_SOCFPGA
+		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SUN9I_UART0
 		bool "Kernel low-level debugging messages via sun9i UART0"
@@ -1192,6 +1199,28 @@ choice
 
 		  If unsure, say N.
 
+	config STM32F4_DEBUG_UART
+		bool "Use STM32F4 UART for low-level debug"
+		depends on ARCH_STM32
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F4 based platforms, which default UART is wired on
+		  USART1.
+
+		  If unsure, say N.
+
+	config STM32F7_DEBUG_UART
+		bool "Use STM32F7 UART for low-level debug"
+		depends on ARCH_STM32
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F7 based platforms, which default UART is wired on
+		  USART1.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1440,21 +1469,21 @@ config DEBUG_OMAP2PLUS_UART
 	depends on ARCH_OMAP2PLUS
 
 config DEBUG_IMX_UART_PORT
-	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
-						DEBUG_IMX25_UART || \
-						DEBUG_IMX21_IMX27_UART || \
-						DEBUG_IMX31_UART || \
-						DEBUG_IMX35_UART || \
-						DEBUG_IMX50_UART || \
-						DEBUG_IMX51_UART || \
-						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART || \
-						DEBUG_IMX6SX_UART || \
-						DEBUG_IMX6UL_UART || \
-						DEBUG_IMX7D_UART
+	int "i.MX Debug UART Port Selection"
+	depends on DEBUG_IMX1_UART || \
+		   DEBUG_IMX25_UART || \
+		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX31_UART || \
+		   DEBUG_IMX35_UART || \
+		   DEBUG_IMX50_UART || \
+		   DEBUG_IMX51_UART || \
+		   DEBUG_IMX53_UART || \
+		   DEBUG_IMX6Q_UART || \
+		   DEBUG_IMX6SL_UART || \
+		   DEBUG_IMX6SX_UART || \
+		   DEBUG_IMX6UL_UART || \
+		   DEBUG_IMX7D_UART
 	default 1
-	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
@@ -1476,6 +1505,10 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_STM32_UART
+	bool
+	depends on ARCH_STM32
+
 config DEBUG_SIRFSOC_UART
 	bool
 	depends on ARCH_SIRF
@@ -1525,6 +1558,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
 	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
@@ -1655,7 +1689,8 @@ config DEBUG_UART_PHYS
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
-	default 0xffc02100 if DEBUG_SOCFPGA_UART1
+	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffd82340 if ARCH_IOP13XX
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
@@ -1762,7 +1797,8 @@ config DEBUG_UART_VIRT
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
 	default 0xfec02000 if DEBUG_SOCFPGA_UART0
-	default 0xfec02100 if DEBUG_SOCFPGA_UART1
+	default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
@@ -1811,9 +1847,9 @@ config DEBUG_UART_8250_WORD
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
 	default y if DEBUG_PICOXCELL_UART || \
-		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
-		DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
-		DEBUG_ALPINE_UART0 || \
+		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 6dd9d487aaeb..ae43d61f4e8b 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -585,7 +585,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 490726b52216..9dc7ec7655cb 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -33,6 +33,7 @@
 		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
+		startup-delay-us = <25000>;
 	};
 
 	vbat: fixedregulator-vbat {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index bf7ca00f4c21..bc853ebeda22 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -701,6 +701,7 @@
 };
 
 &dwc3 {
+	extcon = <&extcon_usb3>;
 	dr_mode = "otg";
 };
 
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 0f580caa81e5..bf8702ee8f86 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -26,8 +26,9 @@
 
 #define UARTA_3390		REG_PHYS_ADDR(0x40a900)
 #define UARTA_7250		REG_PHYS_ADDR(0x40b400)
-#define UARTA_7260		REG_PHYS_ADDR(0x40c000)
-#define UARTA_7268		UARTA_7260
+#define UARTA_7255		REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260		UARTA_7255
+#define UARTA_7268		UARTA_7255
 #define UARTA_7271		UARTA_7268
 #define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
@@ -82,15 +83,16 @@ ARM_BE8(	rev	\rv, \rv )
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
 21:		checkuart(\rp, \rv, 0x72500000, 7250)
-22:		checkuart(\rp, \rv, 0x72600000, 7260)
-23:		checkuart(\rp, \rv, 0x72680000, 7268)
-24:		checkuart(\rp, \rv, 0x72710000, 7271)
-25:		checkuart(\rp, \rv, 0x73640000, 7364)
-26:		checkuart(\rp, \rv, 0x73660000, 7366)
-27:		checkuart(\rp, \rv, 0x07437100, 74371)
-28:		checkuart(\rp, \rv, 0x74390000, 7439)
-29:		checkuart(\rp, \rv, 0x74450000, 7445)
-30:		checkuart(\rp, \rv, 0x72780000, 7278)
+22:		checkuart(\rp, \rv, 0x72550000, 7255)
+23:		checkuart(\rp, \rv, 0x72600000, 7260)
+24:		checkuart(\rp, \rv, 0x72680000, 7268)
+25:		checkuart(\rp, \rv, 0x72710000, 7271)
+26:		checkuart(\rp, \rv, 0x72780000, 7278)
+27:		checkuart(\rp, \rv, 0x73640000, 7364)
+28:		checkuart(\rp, \rv, 0x73660000, 7366)
+29:		checkuart(\rp, \rv, 0x07437100, 74371)
+30:		checkuart(\rp, \rv, 0x74390000, 7439)
+31:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
new file mode 100644
index 000000000000..1abb32f685fd
--- /dev/null
+++ b/arch/arm/include/debug/stm32.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics SA 2017 - All Rights Reserved
+ * Author:   Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
+ */
+
+#define STM32_UART_BASE			0x40011000	/* USART1 */
+
+#ifdef CONFIG_STM32F4_DEBUG_UART
+#define STM32_USART_SR_OFF		0x00
+#define STM32_USART_TDR_OFF		0x04
+#endif
+
+#ifdef CONFIG_STM32F7_DEBUG_UART
+#define STM32_USART_SR_OFF		0x1C
+#define STM32_USART_TDR_OFF		0x28
+#endif
+
+#define STM32_USART_TC			(1 << 6)	/* Tx complete       */
+#define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
+
+.macro	addruart, rp, rv, tmp
+	ldr	\rp,      =STM32_UART_BASE	@ physical base
+	ldr	\rv,      =STM32_UART_BASE      @ virt base /* NoMMU */
+.endm
+
+.macro  senduart,rd,rx
+	strb    \rd, [\rx, #STM32_USART_TDR_OFF]
+.endm
+
+.macro  waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TXE			@ TXE = 1 = tx empty
+	beq	1001b
+.endm
+
+.macro  busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TC			@ TC = 1 = tx complete
+	beq	1001b
+.endm
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a3f375af673d..a067adf9f1ee 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -189,6 +189,7 @@ config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC"
 	depends on ARCH_MULTI_V7
 	depends on MMU
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 8cff865ace04..bfc556f76720 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c
index 7d954830eb57..47f8053d0240 100644
--- a/arch/arm/mach-bcm/platsmp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014-2015 Broadcom Corporation
  * Copyright 2014 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/cpumask.h>
diff --git a/arch/arm/mach-bcm/platsmp.h b/arch/arm/mach-bcm/platsmp.h
index b8b8b3fa350d..e65bffad1d23 100644
--- a/arch/arm/mach-bcm/platsmp.h
+++ b/arch/arm/mach-bcm/platsmp.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
  */
 
 extern const struct smp_operations bcm2836_smp_ops;
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 7d8ab36ff83d..e52ec1619b70 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -30,6 +30,7 @@
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/platform_data/ti-aemif.h>
 #include <linux/regulator/machine.h>
+#include <linux/nvmem-provider.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -435,6 +436,27 @@ static inline void da830_evm_init_lcdc(int mux_mode)
 static inline void da830_evm_init_lcdc(int mux_mode) { }
 #endif
 
+static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x7f00,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
+	.nvmem_name	= "1-00500",
+	.cells		= da830_evm_nvmem_cells,
+	.ncells		= ARRAY_SIZE(da830_evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
+	.nvmem_name	= "1-00500",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct at24_platform_data da830_evm_i2c_eeprom_info = {
 	.byte_len	= SZ_256K / 8,
 	.page_size	= 64,
@@ -620,6 +642,10 @@ static __init void da830_evm_init(void)
 			__func__, ret);
 
 	davinci_serial_init(da8xx_serial_device);
+
+	nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
+	nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
+
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index e1a949b47306..6a29baf0a289 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/pca953x.h>
 #include <linux/input.h>
 #include <linux/input/tps6507x-ts.h>
@@ -28,6 +27,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -100,6 +100,31 @@ static struct mtd_partition da850evm_spiflash_part[] = {
 	},
 };
 
+static struct nvmem_cell_info da850evm_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x0,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table da850evm_nvmem_cell_table = {
+	/*
+	 * The nvmem name differs from the partition name because of the
+	 * internal works of the nvmem framework.
+	 */
+	.nvmem_name	= "MAC-Address0",
+	.cells		= da850evm_nvmem_cells,
+	.ncells		= ARRAY_SIZE(da850evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
+	.nvmem_name	= "MAC-Address0",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct flash_platform_data da850evm_spiflash_data = {
 	.name		= "m25p80",
 	.parts		= da850evm_spiflash_part,
@@ -1395,6 +1420,9 @@ static __init void da850_evm_init(void)
 
 	davinci_serial_init(da8xx_serial_device);
 
+	nvmem_add_cell_table(&da850evm_nvmem_cell_table);
+	nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
+
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 09e439d4abf5..e3b0b701e395 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/slab.h>
 #include <linux/mtd/rawnand.h>
+#include <linux/nvmem-provider.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
@@ -203,6 +204,27 @@ static struct platform_device davinci_aemif_device = {
 	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
 };
 
+static struct nvmem_cell_info davinci_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x7f00,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table davinci_nvmem_cell_table = {
+	.nvmem_name	= "1-00500",
+	.cells		= davinci_nvmem_cells,
+	.ncells		= ARRAY_SIZE(davinci_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
+	.nvmem_name	= "1-00500",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -781,6 +803,9 @@ static __init void dm365_evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+	nvmem_add_cell_table(&davinci_nvmem_cell_table);
+	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
+
 	evm_init_i2c();
 	davinci_serial_init(dm365_serial_device);
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index e4a8f9225d16..e1428115067f 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/nvmem-provider.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
@@ -510,6 +511,27 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_info dm644evm_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x7f00,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table dm644evm_nvmem_cell_table = {
+	.nvmem_name	= "1-00500",
+	.cells		= dm644evm_nvmem_cells,
+	.ncells		= ARRAY_SIZE(dm644evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
+	.nvmem_name	= "1-00500",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
@@ -842,6 +864,8 @@ static __init void davinci_evm_init(void)
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 #ifdef CONFIG_I2C
+	nvmem_add_cell_table(&dm644evm_nvmem_cell_table);
+	nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1);
 	evm_init_i2c();
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 #endif
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 3e5ee09ee717..8d5be6dd2019 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -32,6 +32,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
 #include <linux/clk.h>
 #include <linux/export.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -342,6 +343,27 @@ static struct pcf857x_platform_data pcf_data = {
  *  - ... newer boards may have more
  */
 
+static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x7f00,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = {
+	.nvmem_name	= "1-00500",
+	.cells		= dm646x_evm_nvmem_cells,
+	.ncells		= ARRAY_SIZE(dm646x_evm_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
+	.nvmem_name	= "1-00500",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -815,6 +837,8 @@ static __init void evm_init(void)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
 #ifdef CONFIG_I2C
+	nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table);
+	nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1);
 	evm_init_i2c();
 #endif
 
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2933e0c87cfa..8df16e81b69e 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -15,6 +15,7 @@
 #include <linux/console.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
+#include <linux/nvmem-provider.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
@@ -161,6 +162,31 @@ bad_config:
 	mityomapl138_cpufreq_init(partnum);
 }
 
+/*
+ * We don't define a cell for factory config as it will be accessed from the
+ * board file using the nvmem notifier chain.
+ */
+static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
+	{
+		.name		= "macaddr",
+		.offset		= 0x64,
+		.bytes		= ETH_ALEN,
+	}
+};
+
+static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
+	.nvmem_name	= "1-00500",
+	.cells		= mityomapl138_nvmem_cells,
+	.ncells		= ARRAY_SIZE(mityomapl138_nvmem_cells),
+};
+
+static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
+	.nvmem_name	= "1-00500",
+	.cell_name	= "macaddr",
+	.dev_id		= "davinci_emac.1",
+	.con_id		= "mac-address",
+};
+
 static struct at24_platform_data mityomapl138_fd_chip = {
 	.byte_len	= 256,
 	.page_size	= 8,
@@ -543,6 +569,9 @@ static void __init mityomapl138_init(void)
 
 	davinci_serial_init(da8xx_serial_device);
 
+	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
+	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
+
 	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
 	if (ret)
 		pr_warn("i2c0 registration failed: %d\n", ret);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f96730cce6e8..1b8699e94098 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -114,8 +114,6 @@ bool __init exynos_secure_firmware_available(void);
 void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
 
-extern u32 exynos_get_eint_wake_mask(void);
-
 #ifdef CONFIG_PM_SLEEP
 extern void __init exynos_pm_init(void);
 #else
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 6a1e682371b3..c39ffd2e2fe6 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -397,38 +397,12 @@ fail:
 
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	exynos_sysram_init();
 
 	exynos_set_delayed_reset_assertion(true);
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 		exynos_scu_enable();
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The boot monitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 *
-	 * Try using firmware operation first and fall back to
-	 * boot register if it fails.
-	 */
-	for (i = 1; i < max_cpus; ++i) {
-		unsigned long boot_addr;
-		u32 mpidr;
-		u32 core_id;
-		int ret;
-
-		mpidr = cpu_logical_map(i);
-		core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		boot_addr = __pa_symbol(exynos4_secondary_startup);
-
-		ret = exynos_set_boot_addr(core_id, boot_addr);
-		if (ret)
-			break;
-	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index bb8e3985acdb..0850505ac78b 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -30,8 +30,6 @@
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
-#include <plat/pm-common.h>
-
 #include "common.h"
 
 #define REG_TABLE_END (-1U)
@@ -93,6 +91,11 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
 	{ /* sentinel */ },
 };
 
+static u32 exynos_read_eint_wakeup_mask(void)
+{
+	return pmu_raw_readl(EXYNOS_EINT_WAKEUP_MASK);
+}
+
 static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 {
 	const struct exynos_wkup_irq *wkup_irq;
@@ -277,8 +280,10 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 
 static void exynos_pm_set_wakeup_mask(void)
 {
-	/* Set wake-up mask registers */
-	pmu_raw_writel(exynos_get_eint_wake_mask(), EXYNOS_EINT_WAKEUP_MASK);
+	/*
+	 * Set wake-up mask registers
+	 * EXYNOS_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+	 */
 	pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 }
 
@@ -488,27 +493,24 @@ early_wakeup:
 
 static int exynos_suspend_enter(suspend_state_t state)
 {
+	u32 eint_wakeup_mask = exynos_read_eint_wakeup_mask();
 	int ret;
 
-	s3c_pm_debug_init();
-
-	S3C_PMDBG("%s: suspending the system...\n", __func__);
+	pr_debug("%s: suspending the system...\n", __func__);
 
-	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
-			exynos_irqwake_intmask, exynos_get_eint_wake_mask());
+	pr_debug("%s: wakeup masks: %08x,%08x\n", __func__,
+		  exynos_irqwake_intmask, eint_wakeup_mask);
 
 	if (exynos_irqwake_intmask == -1U
-	    && exynos_get_eint_wake_mask() == -1U) {
+	    && eint_wakeup_mask == EXYNOS_EINT_WAKEUP_MASK_DISABLED) {
 		pr_err("%s: No wake-up sources!\n", __func__);
 		pr_err("%s: Aborting sleep\n", __func__);
 		return -EINVAL;
 	}
 
-	s3c_pm_save_uarts();
 	if (pm_data->pm_prepare)
 		pm_data->pm_prepare();
 	flush_cache_all();
-	s3c_pm_check_store();
 
 	ret = call_firmware_op(suspend);
 	if (ret == -ENOSYS)
@@ -518,14 +520,11 @@ static int exynos_suspend_enter(suspend_state_t state)
 
 	if (pm_data->pm_resume_prepare)
 		pm_data->pm_resume_prepare();
-	s3c_pm_restore_uarts();
 
-	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+	pr_debug("%s: wakeup stat: %08x\n", __func__,
 			pmu_raw_readl(S5P_WAKEUP_STAT));
 
-	s3c_pm_check_restore();
-
-	S3C_PMDBG("%s: resuming the system...\n", __func__);
+	pr_debug("%s: resuming the system...\n", __func__);
 
 	return 0;
 }
@@ -548,8 +547,6 @@ static int exynos_suspend_prepare(void)
 		return ret;
 	}
 
-	s3c_pm_check_prepare();
-
 	return 0;
 }
 
@@ -557,8 +554,6 @@ static void exynos_suspend_finish(void)
 {
 	int ret;
 
-	s3c_pm_check_cleanup();
-
 	ret = regulator_suspend_finish();
 	if (ret)
 		pr_warn("Failed to resume regulators from suspend (%d)\n", ret);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index abc337111eff..9b8d4d6aa763 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -558,6 +558,15 @@ config SOC_IMX7D
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
+config SOC_IMX7ULP
+	bool "i.MX7ULP support"
+	select CLKSRC_IMX_TPM
+	select PINCTRL_IMX7ULP
+	select SOC_IMX7D_CA7 if ARCH_MULTI_V7
+	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
+	help
+	  This enables support for Freescale i.MX7 Ultra Low Power processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index bae179af21f6..8af2f7e91d13 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o
 obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o
+obj-$(CONFIG_SOC_IMX7ULP) += mach-imx7ulp.o pm-imx7ulp.o
 
 ifeq ($(CONFIG_SUSPEND),y)
 AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 423dd76bb6b8..bc915e5b4d56 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -120,6 +120,7 @@ void imx6dl_pm_init(void);
 void imx6sl_pm_init(void);
 void imx6sx_pm_init(void);
 void imx6ul_pm_init(void);
+void imx7ulp_pm_init(void);
 
 #ifdef CONFIG_PM
 void imx51_pm_init(void);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index c73593e09121..0b137eeffb61 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -145,6 +145,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX7D:
 		soc_id = "i.MX7D";
 		break;
+	case MXC_CPU_IMX7ULP:
+		soc_id = "i.MX7ULP";
+		break;
 	default:
 		soc_id = "Unknown";
 	}
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
new file mode 100644
index 000000000000..33937ebf66b5
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Author: Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static void __init imx7ulp_init_machine(void)
+{
+	imx7ulp_pm_init();
+
+	mxc_set_cpu_type(MXC_CPU_IMX7ULP);
+	of_platform_default_populate(NULL, NULL, imx_soc_device_init());
+}
+
+static const char *const imx7ulp_dt_compat[] __initconst = {
+	"fsl,imx7ulp",
+	NULL,
+};
+
+DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)")
+	.init_machine	= imx7ulp_init_machine,
+	.dt_compat	= imx7ulp_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index b130a53ff62a..8e72d4e080af 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -44,6 +44,7 @@
 #define MXC_CPU_IMX6ULZ		0x6b
 #define MXC_CPU_IMX6SLL		0x67
 #define MXC_CPU_IMX7D		0x72
+#define MXC_CPU_IMX7ULP		0xff
 
 #define IMX_DDR_TYPE_LPDDR2		1
 
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
new file mode 100644
index 000000000000..cf6a380c2b8d
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Author: Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SMC_PMCTRL		0x10
+#define BP_PMCTRL_PSTOPO        16
+#define PSTOPO_PSTOP3		0x3
+
+void __init imx7ulp_pm_init(void)
+{
+	struct device_node *np;
+	void __iomem *smc1_base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
+	smc1_base = of_iomap(np, 0);
+	WARN_ON(!smc1_base);
+
+	/* Partial Stop mode 3 with system/bus clock enabled */
+	writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO,
+		       smc1_base + SMC_PMCTRL);
+	iounmap(smc1_base);
+}
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index ef835d82cdb9..5783062224c3 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -100,7 +100,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
 	},
 };
 
-static void acs5k_i2c_init(void)
+static void __init acs5k_i2c_init(void)
 {
 	/* The gpio interface */
 	gpiod_add_lookup_table(&acs5k_i2c_gpiod_table);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index d51cfda953d4..b16831697183 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -4,12 +4,14 @@ menuconfig ARCH_MESON
 	select GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
+	select ARM_GLOBAL_TIMER
 	select CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_MESON
 	select COMMON_CLK
 	select COMMON_CLK_AMLOGIC
 	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
 
 if ARCH_MESON
 
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 6c2ebf01893a..75b2d7db643e 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -29,6 +29,7 @@
 #include "addr-map.h"
 #include "mfp-pxa168.h"
 #include "pxa168.h"
+#include "pxa910.h"
 #include "irqs.h"
 #include "common.h"
 
@@ -256,9 +257,15 @@ static void __init common_init(void)
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
 
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+	platform_device_register(&pxa168_device_usb_phy);
+#endif
+
 #if IS_ENABLED(CONFIG_USB_EHCI_MV)
 	pxa168_add_usb_host(&pxa168_sph_pdata);
 #endif
+#endif
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index 7e284d9c429f..483b8b6d3005 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -2,7 +2,7 @@
 #include <linux/reboot.h>
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
-extern void timer_init(int irq);
+extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 0fca63c80e1a..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -240,6 +240,27 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg)
 #if IS_ENABLED(CONFIG_USB_SUPPORT)
 static u64 __maybe_unused usb_dma_mask = ~(u32)0;
 
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+struct resource pxa168_usb_phy_resources[] = {
+	[0] = {
+		.start	= PXA168_U2O_PHYBASE,
+		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa168_device_usb_phy = {
+	.name		= "pxa-usb-phy",
+	.id		= -1,
+	.resource	= pxa168_usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
+	.dev		=  {
+		.dma_mask	= &usb_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	}
+};
+#endif /* CONFIG_PHY_PXA_USB */
+
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 struct resource pxa168_u2o_resources[] = {
 	/* regbase */
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 0341359b24a4..50c5e8b5be3d 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -26,8 +26,8 @@ static void __init mmp_init_time(void)
 #ifdef CONFIG_CACHE_TAUROS2
 	tauros2_init(0);
 #endif
-	mmp_dt_init_timer();
 	of_clk_init(NULL);
+	mmp_dt_init_timer();
 }
 
 static const char *const mmp2_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index afba5460cdaf..726c1a642dea 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -134,7 +134,7 @@ void __init mmp2_timer_init(void)
 	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
 	__raw_writel(clk_rst, APBC_TIMERS);
 
-	timer_init(IRQ_MMP2_TIMER1);
+	mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
 }
 
 /* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 0f5f16fb8c66..cdcf65ace3f9 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -79,7 +79,7 @@ void __init pxa168_timer_init(void)
 	/* 3.25MHz, bus/functional clock enabled, release reset */
 	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
-	timer_init(IRQ_PXA168_TIMER1);
+	mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
 }
 
 void pxa168_clear_keypad_wakeup(void)
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1ccbba9ac495..d30a7d12bc98 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -116,7 +116,7 @@ void __init pxa910_timer_init(void)
 	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
 	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
 
-	timer_init(IRQ_PXA910_AP1_TIMER1);
+	mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
 }
 
 /* on-chip devices */
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 42009c349eae..2dfe38e4acc1 100644
--- a/arch/arm/mach-mmp/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -22,6 +22,7 @@ extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa168_device_usb_phy;
 extern struct platform_device pxa168_device_u2o;
 extern struct platform_device pxa168_device_u2ootg;
 extern struct platform_device pxa168_device_u2oehci;
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 96ad1db0b04b..f9c295154b94 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -38,12 +39,6 @@
 #include "cputype.h"
 #include "clock.h"
 
-#ifdef CONFIG_CPU_MMP2
-#define MMP_CLOCK_FREQ		6500000
-#else
-#define MMP_CLOCK_FREQ		3250000
-#endif
-
 #define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
 
 #define MAX_DELTA		(0xfffffffe)
@@ -189,19 +184,18 @@ static struct irqaction timer_irq = {
 	.dev_id		= &ckevt,
 };
 
-void __init timer_init(int irq)
+void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
-	sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
+	sched_clock_register(mmp_read_sched_clock, 32, rate);
 
 	ckevt.cpumask = cpumask_of(0);
 
 	setup_irq(irq, &timer_irq);
 
-	clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
-	clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
-					MIN_DELTA, MAX_DELTA);
+	clocksource_register_hz(&cksrc, rate);
+	clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA);
 }
 
 #ifdef CONFIG_OF
@@ -213,7 +207,9 @@ static const struct of_device_id mmp_timer_dt_ids[] = {
 void __init mmp_dt_init_timer(void)
 {
 	struct device_node *np;
+	struct clk *clk;
 	int irq, ret;
+	unsigned long rate;
 
 	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
 	if (!np) {
@@ -221,6 +217,18 @@ void __init mmp_dt_init_timer(void)
 		goto out;
 	}
 
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto out;
+		rate = clk_get_rate(clk) / 2;
+	} else if (cpu_is_pj4()) {
+		rate = 6500000;
+	} else {
+		rate = 3250000;
+	}
+
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		ret = -EINVAL;
@@ -231,7 +239,7 @@ void __init mmp_dt_init_timer(void)
 		ret = -ENOMEM;
 		goto out;
 	}
-	timer_init(irq);
+	mmp_timer_init(irq, rate);
 	return;
 out:
 	pr_err("Failed to get timer from device tree with error:%d\n", ret);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index c7897fb2b6da..09b53ace08ac 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -282,6 +282,11 @@ static void __init ttc_dkb_init(void)
 				 sizeof(struct pxa_gpio_platform_data));
 	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+#if IS_ENABLED(CONFIG_PHY_PXA_USB)
+	platform_device_register(&pxa168_device_usb_phy);
+#endif
+
 #if IS_ENABLED(CONFIG_USB_MV_UDC)
 	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2o);
@@ -296,6 +301,7 @@ static void __init ttc_dkb_init(void)
 	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
 	platform_device_register(&pxa168_device_u2ootg);
 #endif
+#endif
 
 #if IS_ENABLED(CONFIG_MMP_DISP)
 	add_disp();
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index a7e9c6d19fb5..c757a52d0801 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -25,7 +25,7 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
-usb-fs-$(CONFIG_USB)			:= usb.o
+usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index e3faa0274b56..7c9fb7fe0070 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -18,9 +18,9 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
-#include <mach/board-ams-delta.h>
 
 #include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
 #include "iomap.h"
 #include "soc.h"
 
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 0324d0f209ea..51212133ce06 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -22,11 +22,10 @@
 #include <linux/platform_data/ams-delta-fiq.h>
 #include <linux/platform_device.h>
 
-#include <mach/board-ams-delta.h>
-
 #include <asm/fiq.h>
 
 #include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
 
 static struct fiq_handler fh = {
 	.name	= "ams-delta-fiq"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 49e3adffbf5b..c4c0a8ea11e4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -36,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/mux.h>
 
@@ -45,6 +44,7 @@
 #include <mach/usb.h>
 
 #include "ams-delta-fiq.h"
+#include "board-ams-delta.h"
 #include "iomap.h"
 #include "common.h"
 
@@ -167,7 +167,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-#define LATCH1_GPIO_BASE	232
 #define LATCH1_NGPIO		8
 
 static struct resource latch1_resources[] = {
@@ -183,7 +182,6 @@ static struct resource latch1_resources[] = {
 
 static struct bgpio_pdata latch1_pdata = {
 	.label	= LATCH1_LABEL,
-	.base	= LATCH1_GPIO_BASE,
 	.ngpio	= LATCH1_NGPIO,
 };
 
@@ -206,11 +204,13 @@ static struct platform_device latch1_gpio_device = {
 #define LATCH1_PIN_DOCKIT1		6
 #define LATCH1_PIN_DOCKIT2		7
 
+#define LATCH2_NGPIO			16
+
 static struct resource latch2_resources[] = {
 	[0] = {
 		.name	= "dat",
 		.start	= LATCH2_PHYS,
-		.end	= LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+		.end	= LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -219,8 +219,7 @@ static struct resource latch2_resources[] = {
 
 static struct bgpio_pdata latch2_pdata = {
 	.label	= LATCH2_LABEL,
-	.base	= AMS_DELTA_LATCH2_GPIO_BASE,
-	.ngpio	= AMS_DELTA_LATCH2_NGPIO,
+	.ngpio	= LATCH2_NGPIO,
 };
 
 static struct platform_device latch2_gpio_device = {
@@ -247,8 +246,8 @@ static struct platform_device latch2_gpio_device = {
 #define LATCH2_PIN_SCARD_CMDVCC		11
 #define LATCH2_PIN_MODEM_NRESET		12
 #define LATCH2_PIN_MODEM_CODEC		13
-#define LATCH2_PIN_HOOKFLASH1		14
-#define LATCH2_PIN_HOOKFLASH2		15
+#define LATCH2_PIN_AUDIO_MUTE		14
+#define LATCH2_PIN_HOOKFLASH		15
 
 static struct regulator_consumer_supply modem_nreset_consumers[] = {
 	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
@@ -369,15 +368,9 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
 	},
 };
 
-/*
- * Dynamically allocated GPIO numbers must be obtained fromm GPIO device
- * before they can be put in the gpio_led table.  Before that happens,
- * initialize the table with invalid GPIO numbers, not 0.
- */
 static struct gpio_led gpio_leds[] __initdata = {
 	[LATCH1_PIN_LED_CAMERA] = {
 		.name		 = "camera",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 #ifdef CONFIG_LEDS_TRIGGERS
 		.default_trigger = "ams_delta_camera",
@@ -385,27 +378,22 @@ static struct gpio_led gpio_leds[] __initdata = {
 	},
 	[LATCH1_PIN_LED_ADVERT] = {
 		.name		 = "advert",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_MAIL] = {
 		.name		 = "email",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_HANDSFREE] = {
 		.name		 = "handsfree",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_VOICEMAIL] = {
 		.name		 = "voicemail",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 	[LATCH1_PIN_LED_VOICE] = {
 		.name		 = "voice",
-		.gpio		 = -EINVAL,
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
 	},
 };
@@ -415,6 +403,24 @@ static const struct gpio_led_platform_data leds_pdata __initconst = {
 	.num_leds	= ARRAY_SIZE(gpio_leds),
 };
 
+static struct gpiod_lookup_table leds_gpio_table = {
+	.table = {
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL,
+				LATCH1_PIN_LED_CAMERA, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL,
+				LATCH1_PIN_LED_ADVERT, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL,
+				LATCH1_PIN_LED_MAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL,
+				LATCH1_PIN_LED_HANDSFREE, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL,
+				LATCH1_PIN_LED_VOICEMAIL, 0),
+		GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL,
+				LATCH1_PIN_LED_VOICE, 0),
+		{ },
+	},
+};
+
 static struct i2c_board_info ams_delta_camera_board_info[] = {
 	{
 		I2C_BOARD_INFO("ov6650", 0x60),
@@ -586,6 +592,8 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data)
 static struct gpiod_hog ams_delta_gpio_hogs[] = {
 	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
 		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
+	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute",
+		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
 	{},
 };
 
@@ -675,6 +683,8 @@ static void __init ams_delta_latch2_init(void)
 
 static void __init ams_delta_init(void)
 {
+	struct platform_device *leds_pdev;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -738,6 +748,12 @@ static void __init ams_delta_init(void)
 	gpiod_add_lookup_tables(ams_delta_gpio_tables,
 				ARRAY_SIZE(ams_delta_gpio_tables));
 
+	leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
+	if (!IS_ERR(leds_pdev)) {
+		leds_gpio_table.dev_id = dev_name(&leds_pdev->dev);
+		gpiod_add_lookup_table(&leds_gpio_table);
+	}
+
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 
 	omapfb_set_lcd_config(&ams_delta_lcd_config);
@@ -794,64 +810,6 @@ static struct platform_device ams_delta_modem_device = {
 	},
 };
 
-/*
- * leds-gpio driver doesn't make use of GPIO lookup tables,
- * it has to be provided with GPIO numbers over platform data
- * if GPIO descriptor info can't be obtained from device tree.
- * We could either define GPIO lookup tables and use them on behalf
- * of the leds-gpio device, or we can use GPIO driver level methods
- * for identification of GPIO numbers as long as we don't support
- * device tree.  Let's do the latter.
- */
-static void __init ams_delta_led_init(struct gpio_chip *chip)
-{
-	struct gpio_desc *gpiod;
-	int i;
-
-	for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) {
-		gpiod = gpiochip_request_own_desc(chip, i, "camera-led", 0);
-		if (IS_ERR(gpiod)) {
-			pr_warn("%s: %s GPIO %d request failed (%ld)\n",
-				__func__, LATCH1_LABEL, i, PTR_ERR(gpiod));
-			continue;
-		}
-
-		/* Assign GPIO numbers to LED device. */
-		gpio_leds[i].gpio = desc_to_gpio(gpiod);
-
-		gpiochip_free_own_desc(gpiod);
-	}
-
-	gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata);
-}
-
-/*
- * The purpose of this function is to take care of assignment of GPIO numbers
- * to platform devices which depend on GPIO lines provided by Amstrad Delta
- * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables.
- * The function may be called as soon as latch1/latch2 GPIO devices are
- * initilized.  Since basic-mmio-gpio driver is not registered before
- * device_initcall, this may happen at erliest during device_initcall_sync.
- * Dependent devices shouldn't be registered before that, their
- * registration may be performed from within this function or later.
- */
-static int __init ams_delta_gpio_init(void)
-{
-	struct gpio_chip *chip;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
-
-	chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label);
-	if (!chip)
-		pr_err("%s: latch1 GPIO chip not found\n", __func__);
-	else
-		ams_delta_led_init(chip);
-
-	return 0;
-}
-device_initcall_sync(ams_delta_gpio_init);
-
 static int __init modem_nreset_init(void)
 {
 	int err;
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/board-ams-delta.h
index 3b2d8019238a..b5c4a373b905 100644
--- a/arch/arm/mach-omap1/include/mach/board-ams-delta.h
+++ b/arch/arm/mach-omap1/board-ams-delta.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ * arch/arm/mach-omap1/board-ams-delta.h
  *
  * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
  *
@@ -28,10 +28,6 @@
 
 #if defined (CONFIG_MACH_AMS_DELTA)
 
-#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
-
 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
 #define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
 #define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
@@ -41,24 +37,6 @@
 #define AMS_DELTA_GPIO_PIN_CONFIG	11
 #define AMS_DELTA_GPIO_PIN_NAND_RB	12
 
-#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
-#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
-#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
-#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
-#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
-#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
-#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
-#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
-#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
-#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
-#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
-#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
-#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
-
-#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
-#define AMS_DELTA_LATCH2_NGPIO		16
-
 #endif /* CONFIG_MACH_AMS_DELTA */
 
 #endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 2dc5deb19803..d4d8a32e57eb 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -43,6 +43,7 @@
 #include <mach/hardware.h>
 #include <mach/usb.h>
 
+#include "mmc.h"
 #include "common.h"
 
 #define PALMTE_USBDETECT_GPIO	0
@@ -208,6 +209,33 @@ static void __init palmte_misc_gpio_setup(void)
 	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
 }
 
+#if IS_ENABLED(CONFIG_MMC_OMAP)
+
+static struct omap_mmc_platform_data _palmte_mmc_config = {
+	.nr_slots			= 1,
+	.slots[0]			= {
+		.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+		.name			= "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *palmte_mmc_config[OMAP15XX_NR_MMC] = {
+	[0] = &_palmte_mmc_config,
+};
+
+static void palmte_mmc_init(void)
+{
+	omap1_init_mmc(palmte_mmc_config, OMAP15XX_NR_MMC);
+}
+
+#else /* CONFIG_MMC_OMAP */
+
+static void palmte_mmc_init(void)
+{
+}
+
+#endif /* CONFIG_MMC_OMAP */
+
 static void __init omap_palmte_init(void)
 {
 	/* mux pins for uarts */
@@ -228,6 +256,7 @@ static void __init omap_palmte_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	omapfb_set_lcd_config(&palmte_lcd_config);
+	palmte_mmc_init();
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fa512413a471..c8c6fe88b2d6 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -968,7 +968,7 @@ late_initcall(omap_clk_enable_autoidle_all);
 
 static struct dentry *clk_debugfs_root;
 
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+static int debug_clock_show(struct seq_file *s, void *unused)
 {
 	struct clk *c;
 	struct clk *pa;
@@ -988,17 +988,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
 	return 0;
 }
 
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
-	.open           = clk_dbg_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(debug_clock);
 
 static int clk_debugfs_register_one(struct clk *c)
 {
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index baaf902b7016..e1243b5d554f 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -244,6 +244,9 @@ struct platform_device omap_spi2 = {
 
 static void omap_init_spi100k(void)
 {
+	if (!cpu_is_omap7xx())
+		return;
+
 	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
 	if (omap_spi1.dev.platform_data)
 		platform_device_register(&omap_spi1);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 52de382fc804..7e49dfda3d2f 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -200,10 +200,10 @@ void __init omap_check_revision(void)
 		printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
 	}
 
-	printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
+	pr_info("OMAP%04x", omap_revision >> 16);
 	if ((omap_revision >> 8) & 0xff)
-		printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
-	printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
+		pr_cont("%x", (omap_revision >> 8) & 0xff);
+	pr_cont(" revision %i handled as %02xxx id: %08x%08x\n",
 	       die_rev, omap_revision & 0xff, system_serial_low,
 	       system_serial_high);
 }
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 77867778d4ec..5429d86c7190 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -11,7 +11,7 @@
 
 #include <linux/platform_data/usb-omap1.h>
 
-#if IS_ENABLED(CONFIG_USB)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 3e1de14805e4..998075d3ef86 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -532,18 +532,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int omap_pm_debug_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, omap_pm_debug_show,
-				&inode->i_private);
-}
-
-static const struct file_operations omap_pm_debug_fops = {
-	.open		= omap_pm_debug_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(omap_pm_debug);
 
 static void omap_pm_init_debugfs(void)
 {
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 68ba5f472f6b..859c71c4e932 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -199,8 +199,8 @@ void __init omap2xxx_check_revision(void)
 
 	pr_info("%s", soc_name);
 	if ((omap_rev() >> 8) & 0x0f)
-		pr_info("%s", soc_rev);
-	pr_info("\n");
+		pr_cont("%s", soc_rev);
+	pr_cont("\n");
 }
 
 #define OMAP3_SHOW_FEATURE(feat)		\
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 083dcd9942ce..921c9aaee63f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2413,7 +2413,7 @@ static int __init _init(struct omap_hwmod *oh, void *data)
  * a stub; implementing this properly requires iclk autoidle usecounting in
  * the clock code.   No return value.
  */
-static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+static void _setup_iclk_autoidle(struct omap_hwmod *oh)
 {
 	struct omap_hwmod_ocp_if *os;
 
@@ -2444,7 +2444,7 @@ static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
  * reset.  Returns 0 upon success or a negative error code upon
  * failure.
  */
-static int __init _setup_reset(struct omap_hwmod *oh)
+static int _setup_reset(struct omap_hwmod *oh)
 {
 	int r;
 
@@ -2505,7 +2505,7 @@ static int __init _setup_reset(struct omap_hwmod *oh)
  *
  * No return value.
  */
-static void __init _setup_postsetup(struct omap_hwmod *oh)
+static void _setup_postsetup(struct omap_hwmod *oh)
 {
 	u8 postsetup_state;
 
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index f4971e4a86b2..724cf5774a6c 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -28,7 +28,7 @@ static struct clockdomain *gfx_l4ls_clkdm;
 static void __iomem *scu_base;
 static struct omap_hwmod *rtc_oh;
 
-static int __init am43xx_map_scu(void)
+static int am43xx_map_scu(void)
 {
 	scu_base = ioremap(scu_a9_get_base(), SZ_256);
 
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 98ed5ac073bc..07bea84c5d6e 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -44,7 +44,6 @@
 #include <linux/sched_clock.h>
 
 #include <asm/mach/time.h>
-#include <asm/smp_twd.h>
 
 #include "omap_hwmod.h"
 #include "omap_device.h"
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 109fab292f94..b76b566280fa 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -564,7 +564,7 @@ static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
 	.exit		= cm_x300_u2d_exit,
 };
 
-static void cm_x300_init_u2d(void)
+static void __init cm_x300_init_u2d(void)
 {
 	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
 }
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8e0b60a33026..39db4898dc4a 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -182,7 +182,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
 };
 
-static void littleton_init_lcd(void)
+static void __init littleton_init_lcd(void)
 {
 	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 897ef59fbe0c..c411f79d4cb5 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -576,7 +576,7 @@ static struct pxaohci_platform_data zeus_ohci_platform_data = {
 	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
 };
 
-static void zeus_register_ohci(void)
+static void __init zeus_register_ohci(void)
 {
 	/* Port 2 is shared between host and client interface. */
 	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
index 0a188134deae..cb36058bc35e 100644
--- a/arch/arm/mach-s5pv210/common.h
+++ b/arch/arm/mach-s5pv210/common.h
@@ -10,7 +10,6 @@
 #define __ARCH_ARM_MACH_S5PV210_COMMON_H
 
 #ifdef CONFIG_PM_SLEEP
-u32 exynos_get_eint_wake_mask(void);
 void s5pv210_cpu_resume(void);
 void s5pv210_pm_init(void);
 #else
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index f491249ab658..b336df0c57f3 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -32,6 +32,11 @@ static struct sleep_save s5pv210_core_save[] = {
  */
 static u32 s5pv210_irqwake_intmask = 0xffffffff;
 
+static u32 s5pv210_read_eint_wakeup_mask(void)
+{
+	return __raw_readl(S5P_EINT_WAKEUP_MASK);
+}
+
 /*
  * Suspend helpers.
  */
@@ -59,8 +64,10 @@ static void s5pv210_pm_prepare(void)
 {
 	unsigned int tmp;
 
-	/* Set wake-up mask registers */
-	__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+	/*
+	 * Set wake-up mask registers
+	 * S5P_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+	 */
 	__raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK);
 
 	/* ensure at least INFORM0 has the resume address */
@@ -89,6 +96,7 @@ static void s5pv210_pm_prepare(void)
  */
 static int s5pv210_suspend_enter(suspend_state_t state)
 {
+	u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
 	int ret;
 
 	s3c_pm_debug_init();
@@ -96,10 +104,10 @@ static int s5pv210_suspend_enter(suspend_state_t state)
 	S3C_PMDBG("%s: suspending the system...\n", __func__);
 
 	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
-			s5pv210_irqwake_intmask, exynos_get_eint_wake_mask());
+			s5pv210_irqwake_intmask, eint_wakeup_mask);
 
 	if (s5pv210_irqwake_intmask == -1U
-	    && exynos_get_eint_wake_mask() == -1U) {
+	    && eint_wakeup_mask == -1U) {
 		pr_err("%s: No wake-up sources!\n", __func__);
 		pr_err("%s: Aborting sleep\n", __func__);
 		return -EINVAL;
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index b100c26a858f..3683d6f10973 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,139 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
-config PM_RMOBILE
-	bool
-	select PM
-	select PM_GENERIC_DOMAINS
-
-config ARCH_RCAR_GEN1
-	bool
-	select PM
-	select PM_GENERIC_DOMAINS
-	select RENESAS_INTC_IRQPIN
-	select SYS_SUPPORTS_SH_TMU
-
-config ARCH_RCAR_GEN2
-	bool
-	select HAVE_ARM_ARCH_TIMER
-	select PM
-	select PM_GENERIC_DOMAINS
-	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
-
-config ARCH_RMOBILE
-	bool
-	select PM_RMOBILE
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
-
 menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs"
 	depends on ARCH_MULTI_V7 && MMU
 	select ARM_GIC
 	select GPIOLIB
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select SOC_BUS
 	select ZONE_DMA if ARM_LPAE
-
-if ARCH_RENESAS
-
-#comment "Renesas ARM SoCs System Type"
-
-config ARCH_EMEV2
-	bool "Emma Mobile EV2"
-	select SYS_SUPPORTS_EM_STI
-
-config ARCH_R7S72100
-	bool "RZ/A1H (R7S72100)"
-	select PM
-	select PM_GENERIC_DOMAINS
-	select SYS_SUPPORTS_SH_MTU2
-	select RENESAS_OSTM
-
-config ARCH_R7S9210
-	bool "RZ/A2 (R7S9210)"
-	select PM
-	select PM_GENERIC_DOMAINS
-	select RENESAS_OSTM
-
-config ARCH_R8A73A4
-	bool "R-Mobile APE6 (R8A73A40)"
-	select ARCH_RMOBILE
-	select ARM_ERRATA_798181 if SMP
-	select HAVE_ARM_ARCH_TIMER
-	select RENESAS_IRQC
-
-config ARCH_R8A7740
-	bool "R-Mobile A1 (R8A77400)"
-	select ARCH_RMOBILE
-	select RENESAS_INTC_IRQPIN
-
-config ARCH_R8A7743
-	bool "RZ/G1M (R8A77430)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7744
-	bool "RZ/G1N (R8A77440)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7745
-	bool "RZ/G1E (R8A77450)"
-	select ARCH_RCAR_GEN2
-
-config ARCH_R8A77470
-	bool "RZ/G1C (R8A77470)"
-	select ARCH_RCAR_GEN2
-
-config ARCH_R8A7778
-	bool "R-Car M1A (R8A77781)"
-	select ARCH_RCAR_GEN1
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select ARCH_RCAR_GEN1
-
-config ARCH_R8A7790
-	bool "R-Car H2 (R8A77900)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-	select I2C
-
-config ARCH_R8A7791
-	bool "R-Car M2-W (R8A77910)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-	select I2C
-
-config ARCH_R8A7792
-	bool "R-Car V2H (R8A77920)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-
-config ARCH_R8A7793
-	bool "R-Car M2-N (R8A7793)"
-	select ARCH_RCAR_GEN2
-	select ARM_ERRATA_798181 if SMP
-	select I2C
-
-config ARCH_R8A7794
-	bool "R-Car E2 (R8A77940)"
-	select ARCH_RCAR_GEN2
-
-config ARCH_R9A06G032
-	bool "RZ/N1D (R9A06G032)"
-	select ARCH_RZN1
-
-config ARCH_RZN1
-	bool "RZ/N1 (R9A06G0xx) Family"
-	select ARM_AMBA
-	select CPU_V7
-
-config ARCH_SH73A0
-	bool "SH-Mobile AG5 (R8A73A00)"
-	select ARCH_RMOBILE
-	select RENESAS_INTC_IRQPIN
-endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5591646cb9bb..f7bf17b7abae 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,7 +35,6 @@ smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
-obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 
 # Framework support
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
deleted file mode 100644
index 69f839259b09..000000000000
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- */
-#ifndef PM_RMOBILE_H
-#define PM_RMOBILE_H
-
-#include <linux/pm_domain.h>
-
-struct rmobile_pm_domain {
-	struct generic_pm_domain genpd;
-	struct dev_power_governor *gov;
-	int (*suspend)(void);
-	void (*resume)(void);
-	void __iomem *base;
-	unsigned int bit_shift;
-	bool no_debug;
-};
-
-#endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 9bc543faba96..0403aa8629dd 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -12,7 +12,6 @@
 #include <linux/delay.h>
 
 #include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
 
 #include "common.h"
 #include "sh73a0.h"
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index d43798defdba..cc1745e6c60a 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -11,6 +11,13 @@ menuconfig ARCH_SOCFPGA
 	select HAVE_ARM_TWD if SMP
 	select MFD_SYSCON
 	select PCI_DOMAINS_GENERIC if PCI
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
+	select PL310_ERRATA_588369
+	select PL310_ERRATA_727915
+	select PL310_ERRATA_753970 if PL310
+	select PL310_ERRATA_769419
 
 if ARCH_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 65e1817d8afe..92cae0a9213f 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -34,8 +34,6 @@
 
 #define RSTMGR_MPUMODRST_CPU1		0x2     /* CPU1 Reset */
 
-extern void socfpga_init_clocks(void);
-extern void socfpga_sysmgr_init(void);
 void socfpga_init_l2_ecc(void);
 void socfpga_init_ocram_ecc(void);
 void socfpga_init_arria10_l2_ecc(void);
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index dde14f7bf2c3..5fb6f79059a8 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -32,7 +32,7 @@ void __iomem *rst_manager_base_addr;
 void __iomem *sdr_ctl_base_addr;
 unsigned long socfpga_cpu1start_addr;
 
-void __init socfpga_sysmgr_init(void)
+static void __init socfpga_sysmgr_init(void)
 {
 	struct device_node *np;
 
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d9c8ecf88ec6..7fa6a3d7efd4 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,6 +1,6 @@
 menuconfig ARCH_SUNXI
 	bool "Allwinner SoCs"
-	depends on ARCH_MULTI_V7
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
@@ -9,9 +9,13 @@ menuconfig ARCH_SUNXI
 	select PM_OPP
 	select SUN4I_TIMER
 	select RESET_CONTROLLER
+	help
+	  Support for Allwinner ARM-based family of processors
 
 if ARCH_SUNXI
 
+if ARCH_MULTI_V7
+
 config MACH_SUN4I
 	bool "Allwinner A10 (sun4i) SoCs support"
 	default ARCH_SUNXI
@@ -56,3 +60,16 @@ config ARCH_SUNXI_MC_SMP
 	select ARM_CPU_SUSPEND
 
 endif
+
+if ARCH_MULTI_V5
+
+config MACH_SUNIV
+	bool "Allwinner ARMv5 F-series (suniv) SoCs support"
+	default ARCH_SUNXI
+	help
+	  Support for Allwinner suniv ARMv5 SoCs.
+	  (F1C100A, F1C100s, F1C200s, F1C500, F1C600)
+
+endif
+
+endif
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index de4b0e932f22..8a7f301839c2 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -101,3 +101,12 @@ static const char * const sun9i_board_dt_compat[] = {
 DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family")
 	.dt_compat	= sun9i_board_dt_compat,
 MACHINE_END
+
+static const char * const suniv_board_dt_compat[] = {
+	"allwinner,suniv-f1c100s",
+	NULL,
+};
+
+DT_MACHINE_START(SUNIV_DT, "Allwinner suniv Family")
+	.dt_compat	= suniv_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index a69b22d37eed..a186ab663b0b 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -72,7 +72,7 @@ static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
 	{ }
 };
 
-static void tegra114_gic_cpu_pm_registration(void)
+static void __init tegra114_gic_cpu_pm_registration(void)
 {
 	struct device_node *dn;
 
@@ -85,7 +85,7 @@ static void tegra114_gic_cpu_pm_registration(void)
 	cpu_pm_register_notifier(&tegra_gic_notifier_block);
 }
 #else
-static void tegra114_gic_cpu_pm_registration(void) { }
+static void __init tegra114_gic_cpu_pm_registration(void) { }
 #endif
 
 static const struct of_device_id tegra_ictlr_match[] __initconst = {
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 377ff9cda667..53da57fba39c 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -239,6 +239,7 @@ comment "Power management"
 config SAMSUNG_PM_DEBUG
 	bool "Samsung PM Suspend debug"
 	depends on PM && DEBUG_KERNEL
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
 	depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 51bc479334a4..28f052185eb6 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -157,70 +157,12 @@ config ARCH_REALTEK
 
 config ARCH_RENESAS
 	bool "Renesas SoC Platforms"
+	select GPIOLIB
 	select PINCTRL
-	select PM
-	select PM_GENERIC_DOMAINS
-	select RENESAS_IRQC
 	select SOC_BUS
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
 	help
 	  This enables support for the ARMv8 based Renesas SoCs.
 
-config ARCH_R8A774A1
-	bool "Renesas RZ/G2M SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas RZ/G2M SoC.
-
-config ARCH_R8A774C0
-	bool "Renesas RZ/G2E SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas RZ/G2E SoC.
-
-config ARCH_R8A7795
-	bool "Renesas R-Car H3 SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car H3 SoC.
-
-config ARCH_R8A7796
-	bool "Renesas R-Car M3-W SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car M3-W SoC.
-
-config ARCH_R8A77965
-	bool "Renesas R-Car M3-N SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car M3-N SoC.
-
-config ARCH_R8A77970
-	bool "Renesas R-Car V3M SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car V3M SoC.
-
-config ARCH_R8A77980
-	bool "Renesas R-Car V3H SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car V3H SoC.
-
-config ARCH_R8A77990
-	bool "Renesas R-Car E3 SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car E3 SoC.
-
-config ARCH_R8A77995
-	bool "Renesas R-Car D3 SoC Platform"
-	depends on ARCH_RENESAS
-	help
-	  This enables support for the Renesas R-Car D3 SoC.
-
 config ARCH_ROCKCHIP
 	bool "Rockchip Platforms"
 	select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 2405eaad0296..0f2523296b8a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -195,7 +195,7 @@
 		compatible = "adi,adv7180cp";
 		reg = <0x20>;
 
-		port {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 1d35f5406b5e..5bd4d69914bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -97,7 +97,7 @@
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pcie_pwr_en>;
 		regulator-name = "vcc3v3_pcie";
@@ -293,12 +293,12 @@
 				};
 			};
 
-			vcc2v8_dvp: LDO_REG2 {
-				regulator-name = "vcc2v8_dvp";
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -397,7 +397,9 @@
 	vdd_cpu_b: regulator@40 {
 		compatible = "silergy,syr827";
 		reg = <0x40>;
-		fcs,suspend-voltage-selector = <0>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -415,6 +417,8 @@
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -519,7 +523,7 @@
 
 	pcie {
 		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -529,7 +533,7 @@
 		};
 
 		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
 		vsel2_gpio: vsel2-gpio {
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 407f02c80e8b..4d8012e1205c 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -3,30 +3,226 @@ config SOC_RENESAS
 	bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
 	default y if ARCH_RENESAS
 	select SOC_BUS
-	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
-			   ARCH_R8A774A1 || ARCH_R8A774C0 || ARCH_R8A7795 || \
-			   ARCH_R8A7796 || ARCH_R8A77965 || ARCH_R8A77970 || \
-			   ARCH_R8A77980 || ARCH_R8A77990 || ARCH_R8A77995
-	select SYSC_R8A7743 if ARCH_R8A7743 || ARCH_R8A7744
-	select SYSC_R8A7745 if ARCH_R8A7745
-	select SYSC_R8A77470 if ARCH_R8A77470
-	select SYSC_R8A774A1 if ARCH_R8A774A1
-	select SYSC_R8A774C0 if ARCH_R8A774C0
-	select SYSC_R8A7779 if ARCH_R8A7779
-	select SYSC_R8A7790 if ARCH_R8A7790
-	select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
-	select SYSC_R8A7792 if ARCH_R8A7792
-	select SYSC_R8A7794 if ARCH_R8A7794
-	select SYSC_R8A7795 if ARCH_R8A7795
-	select SYSC_R8A7796 if ARCH_R8A7796
-	select SYSC_R8A77965 if ARCH_R8A77965
-	select SYSC_R8A77970 if ARCH_R8A77970
-	select SYSC_R8A77980 if ARCH_R8A77980
-	select SYSC_R8A77990 if ARCH_R8A77990
-	select SYSC_R8A77995 if ARCH_R8A77995
 
 if SOC_RENESAS
 
+config ARCH_RCAR_GEN1
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_INTC_IRQPIN
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RCAR_GEN2
+	bool
+	select HAVE_ARM_ARCH_TIMER
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_IRQC
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_CMT
+
+config ARCH_RCAR_GEN3
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_IRQC
+	select RST_RCAR
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RMOBILE
+	bool
+	select PM
+	select PM_GENERIC_DOMAINS
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
+	select SYSC_RMOBILE
+
+config ARCH_RZN1
+	bool
+	select ARM_AMBA
+
+if ARM
+
+#comment "Renesas ARM SoCs System Type"
+
+config ARCH_EMEV2
+	bool "Emma Mobile EV2"
+	select HAVE_ARM_SCU if SMP
+	select SYS_SUPPORTS_EM_STI
+
+config ARCH_R7S72100
+	bool "RZ/A1H (R7S72100)"
+	select PM
+	select PM_GENERIC_DOMAINS
+	select SYS_SUPPORTS_SH_MTU2
+	select RENESAS_OSTM
+
+config ARCH_R7S9210
+	bool "RZ/A2 (R7S9210)"
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_OSTM
+
+config ARCH_R8A73A4
+	bool "R-Mobile APE6 (R8A73A40)"
+	select ARCH_RMOBILE
+	select ARM_ERRATA_798181 if SMP
+	select HAVE_ARM_ARCH_TIMER
+	select RENESAS_IRQC
+
+config ARCH_R8A7740
+	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_RMOBILE
+	select RENESAS_INTC_IRQPIN
+
+config ARCH_R8A7743
+	bool "RZ/G1M (R8A77430)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7743
+
+config ARCH_R8A7744
+	bool "RZ/G1N (R8A77440)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7743
+
+config ARCH_R8A7745
+	bool "RZ/G1E (R8A77450)"
+	select ARCH_RCAR_GEN2
+	select SYSC_R8A7745
+
+config ARCH_R8A77470
+	bool "RZ/G1C (R8A77470)"
+	select ARCH_RCAR_GEN2
+	select SYSC_R8A77470
+
+config ARCH_R8A7778
+	bool "R-Car M1A (R8A77781)"
+	select ARCH_RCAR_GEN1
+
+config ARCH_R8A7779
+	bool "R-Car H1 (R8A77790)"
+	select ARCH_RCAR_GEN1
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select SYSC_R8A7779
+
+config ARCH_R8A7790
+	bool "R-Car H2 (R8A77900)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select I2C
+	select SYSC_R8A7790
+
+config ARCH_R8A7791
+	bool "R-Car M2-W (R8A77910)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select I2C
+	select SYSC_R8A7791
+
+config ARCH_R8A7792
+	bool "R-Car V2H (R8A77920)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select SYSC_R8A7792
+
+config ARCH_R8A7793
+	bool "R-Car M2-N (R8A7793)"
+	select ARCH_RCAR_GEN2
+	select ARM_ERRATA_798181 if SMP
+	select I2C
+	select SYSC_R8A7791
+
+config ARCH_R8A7794
+	bool "R-Car E2 (R8A77940)"
+	select ARCH_RCAR_GEN2
+	select SYSC_R8A7794
+
+config ARCH_R9A06G032
+	bool "RZ/N1D (R9A06G032)"
+	select ARCH_RZN1
+
+config ARCH_SH73A0
+	bool "SH-Mobile AG5 (R8A73A00)"
+	select ARCH_RMOBILE
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select RENESAS_INTC_IRQPIN
+
+endif # ARM
+
+if ARM64
+
+config ARCH_R8A774A1
+	bool "Renesas RZ/G2M SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774A1
+	help
+	  This enables support for the Renesas RZ/G2M SoC.
+
+config ARCH_R8A774C0
+	bool "Renesas RZ/G2E SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774C0
+	help
+	  This enables support for the Renesas RZ/G2E SoC.
+
+config ARCH_R8A7795
+	bool "Renesas R-Car H3 SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A7795
+	help
+	  This enables support for the Renesas R-Car H3 SoC.
+
+config ARCH_R8A7796
+	bool "Renesas R-Car M3-W SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A7796
+	help
+	  This enables support for the Renesas R-Car M3-W SoC.
+
+config ARCH_R8A77965
+	bool "Renesas R-Car M3-N SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77965
+	help
+	  This enables support for the Renesas R-Car M3-N SoC.
+
+config ARCH_R8A77970
+	bool "Renesas R-Car V3M SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77970
+	help
+	  This enables support for the Renesas R-Car V3M SoC.
+
+config ARCH_R8A77980
+	bool "Renesas R-Car V3H SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77980
+	help
+	  This enables support for the Renesas R-Car V3H SoC.
+
+config ARCH_R8A77990
+	bool "Renesas R-Car E3 SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77990
+	help
+	  This enables support for the Renesas R-Car E3 SoC.
+
+config ARCH_R8A77995
+	bool "Renesas R-Car D3 SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77995
+	help
+	  This enables support for the Renesas R-Car D3 SoC.
+
+endif # ARM64
+
 # SoC
 config SYSC_R8A7743
 	bool "RZ/G1M System Controller support" if COMPILE_TEST
@@ -103,4 +299,7 @@ config RST_RCAR
 config SYSC_RCAR
 	bool "R-Car System Controller support" if COMPILE_TEST
 
+config SYSC_RMOBILE
+	bool "R-Mobile System Controller support" if COMPILE_TEST
+
 endif # SOC_RENESAS
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 3bdd7dbc38a9..00764d5a60b3 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -27,3 +27,4 @@ endif
 # Family
 obj-$(CONFIG_RST_RCAR)		+= rcar-rst.o
 obj-$(CONFIG_SYSC_RCAR)		+= rcar-sysc.o
+obj-$(CONFIG_SYSC_RMOBILE)	+= rmobile-sysc.o
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/drivers/soc/renesas/rmobile-sysc.c
index c6a11b5ec6db..421ae1c887d8 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/drivers/soc/renesas/rmobile-sysc.c
@@ -18,12 +18,11 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
 #include <linux/slab.h>
 
 #include <asm/io.h>
 
-#include "pm-rmobile.h"
-
 /* SYSC */
 #define SPDCR		0x08	/* SYS Power Down Control Register */
 #define SWUCR		0x14	/* SYS Wakeup Control Register */
@@ -32,6 +31,14 @@
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
 
+struct rmobile_pm_domain {
+	struct generic_pm_domain genpd;
+	struct dev_power_governor *gov;
+	int (*suspend)(void);
+	void __iomem *base;
+	unsigned int bit_shift;
+};
+
 static inline
 struct rmobile_pm_domain *to_rmobile_pd(struct generic_pm_domain *d)
 {
@@ -65,16 +72,13 @@ static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 		}
 	}
 
-	if (!rmobile_pd->no_debug)
-		pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
-			 genpd->name, mask,
-			 __raw_readl(rmobile_pd->base + PSTR));
+	pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n", genpd->name, mask,
+		 __raw_readl(rmobile_pd->base + PSTR));
 
 	return 0;
 }
 
-static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
-				 bool do_resume)
+static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd)
 {
 	unsigned int mask;
 	unsigned int retry_count;
@@ -85,7 +89,7 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
 
 	mask = BIT(rmobile_pd->bit_shift);
 	if (__raw_readl(rmobile_pd->base + PSTR) & mask)
-		goto out;
+		return ret;
 
 	__raw_writel(mask, rmobile_pd->base + SWUCR);
 
@@ -100,21 +104,16 @@ static int __rmobile_pd_power_up(struct rmobile_pm_domain *rmobile_pd,
 	if (!retry_count)
 		ret = -EIO;
 
-	if (!rmobile_pd->no_debug)
-		pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
-			 rmobile_pd->genpd.name, mask,
-			 __raw_readl(rmobile_pd->base + PSTR));
-
-out:
-	if (ret == 0 && rmobile_pd->resume && do_resume)
-		rmobile_pd->resume();
+	pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
+		 rmobile_pd->genpd.name, mask,
+		 __raw_readl(rmobile_pd->base + PSTR));
 
 	return ret;
 }
 
 static int rmobile_pd_power_up(struct generic_pm_domain *genpd)
 {
-	return __rmobile_pd_power_up(to_rmobile_pd(genpd), true);
+	return __rmobile_pd_power_up(to_rmobile_pd(genpd));
 }
 
 static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
@@ -127,7 +126,7 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	genpd->power_on			= rmobile_pd_power_up;
 	genpd->attach_dev		= cpg_mstp_attach_dev;
 	genpd->detach_dev		= cpg_mstp_detach_dev;
-	__rmobile_pd_power_up(rmobile_pd, false);
+	__rmobile_pd_power_up(rmobile_pd);
 	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
 }