diff options
author | Ernesto Castellotti <ernesto@castellotti.net> | 2024-03-01 10:48:03 -0800 |
---|---|---|
committer | Jakub Kicinski <kuba@kernel.org> | 2024-03-04 20:49:58 -0800 |
commit | 1b43e0d20f2d007ec4c124b0deaa848ff8d61f4a (patch) | |
tree | 680d9d471d89925c0eee4c72beeea929fc7c5426 | |
parent | aa9870f5c7ef44c904d35618b6717b9ef7810760 (diff) | |
download | linux-1b43e0d20f2d007ec4c124b0deaa848ff8d61f4a.tar.gz linux-1b43e0d20f2d007ec4c124b0deaa848ff8d61f4a.tar.bz2 linux-1b43e0d20f2d007ec4c124b0deaa848ff8d61f4a.zip |
ixgbe: Add 1000BASE-BX support
Added support for 1000BASE-BX, i.e. Gigabit Ethernet over single strand
of single-mode fiber.
The initialization of a 1000BASE-BX SFP is the same as 1000BASE-SX/LX
with the only difference that the Bit Rate Nominal Value must be
checked to make sure it is a Gigabit Ethernet transceiver, as described
by the SFF-8472 specification.
This was tested with the FS.com SFP-GE-BX 1310/1490nm 10km transceiver:
$ ethtool -m eth4
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00
Transceiver type : Ethernet: BASE-BX10
Encoding : 0x01 (8B/10B)
BR, Nominal : 1300MBd
Rate identifier : 0x00 (unspecified)
Length (SMF,km) : 10km
Length (SMF) : 10000m
Length (50um) : 0m
Length (62.5um) : 0m
Length (Copper) : 0m
Length (OM3) : 0m
Laser wavelength : 1310nm
Vendor name : FS
Vendor OUI : 64:9d:99
Vendor PN : SFP-GE-BX
Vendor rev :
Option values : 0x20 0x0a
Option : RX_LOS implemented
Option : TX_FAULT implemented
Option : Power level 3 requirement
BR margin, max : 0%
BR margin, min : 0%
Vendor SN : S2202359108
Date code : 220307
Optical diagnostics support : Yes
Laser bias current : 17.650 mA
Laser output power : 0.2132 mW / -6.71 dBm
Receiver signal average optical power : 0.2740 mW / -5.62 dBm
Module temperature : 47.30 degrees C / 117.13 degrees F
Module voltage : 3.2576 V
Alarm/warning flags implemented : Yes
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : Off
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 110.000 mA
Laser bias current low alarm threshold : 1.000 mA
Laser bias current high warning threshold : 100.000 mA
Laser bias current low warning threshold : 1.000 mA
Laser output power high alarm threshold : 0.7079 mW / -1.50 dBm
Laser output power low alarm threshold : 0.0891 mW / -10.50 dBm
Laser output power high warning threshold : 0.6310 mW / -2.00 dBm
Laser output power low warning threshold : 0.1000 mW / -10.00 dBm
Module temperature high alarm threshold : 90.00 degrees C / 194.00 degrees F
Module temperature low alarm threshold : -45.00 degrees C / -49.00 degrees F
Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F
Module temperature low warning threshold : -40.00 degrees C / -40.00 degrees F
Module voltage high alarm threshold : 3.7950 V
Module voltage low alarm threshold : 2.8050 V
Module voltage high warning threshold : 3.4650 V
Module voltage low warning threshold : 3.1350 V
Laser rx power high alarm threshold : 0.7079 mW / -1.50 dBm
Laser rx power low alarm threshold : 0.0028 mW / -25.53 dBm
Laser rx power high warning threshold : 0.6310 mW / -2.00 dBm
Laser rx power low warning threshold : 0.0032 mW / -24.95 dBm
Signed-off-by: Ernesto Castellotti <ernesto@castellotti.net>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240301184806.2634508-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 4 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 32 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 3 |
5 files changed, 38 insertions, 5 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index e0c300fe5cee..cdaf087b4e85 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -334,7 +334,9 @@ static int ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; *autoneg = true; return 0; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 633bac1543dd..6e6e6f1847b6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -349,6 +349,8 @@ static int ixgbe_get_link_ksettings(struct net_device *netdev, case ixgbe_sfp_type_1g_sx_core1: case ixgbe_sfp_type_1g_lx_core0: case ixgbe_sfp_type_1g_lx_core1: + case ixgbe_sfp_type_1g_bx_core0: + case ixgbe_sfp_type_1g_bx_core1: ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE); ethtool_link_ksettings_add_link_mode(cmd, advertising, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 75e9453331ed..07eaa3c3f4d3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1532,6 +1532,7 @@ int ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; struct ixgbe_adapter *adapter = hw->back; u8 oui_bytes[3] = {0, 0, 0}; + u8 bitrate_nominal = 0; u8 comp_codes_10g = 0; u8 comp_codes_1g = 0; u16 enforce_sfp = 0; @@ -1576,7 +1577,12 @@ int ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY, &cable_tech); + if (status) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_BITRATE_NOMINAL, + &bitrate_nominal); if (status) goto err_read_i2c_eeprom; @@ -1659,6 +1665,18 @@ int ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) else hw->phy.sfp_type = ixgbe_sfp_type_1g_lx_core1; + /* Support only Ethernet 1000BASE-BX10, checking the Bit Rate + * Nominal Value as per SFF-8472 by convention 1.25 Gb/s should + * be rounded up to 0Dh (13 in units of 100 MBd) for 1000BASE-BX + */ + } else if ((comp_codes_1g & IXGBE_SFF_BASEBX10_CAPABLE) && + (bitrate_nominal == 0xD)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_bx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_bx_core1; } else { hw->phy.sfp_type = ixgbe_sfp_type_unknown; } @@ -1747,7 +1765,9 @@ int ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1)) { hw->phy.type = ixgbe_phy_sfp_unsupported; return -EOPNOTSUPP; } @@ -1763,7 +1783,9 @@ int ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1)) { /* Make sure we're a supported PHY type */ if (hw->phy.type == ixgbe_phy_sfp_intel) return 0; @@ -1999,12 +2021,14 @@ int ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || sfp_type == ixgbe_sfp_type_1g_lx_core0 || sfp_type == ixgbe_sfp_type_1g_cu_core0 || - sfp_type == ixgbe_sfp_type_1g_sx_core0) + sfp_type == ixgbe_sfp_type_1g_sx_core0 || + sfp_type == ixgbe_sfp_type_1g_bx_core0) sfp_type = ixgbe_sfp_type_srlr_core0; else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || sfp_type == ixgbe_sfp_type_1g_lx_core1 || sfp_type == ixgbe_sfp_type_1g_cu_core1 || - sfp_type == ixgbe_sfp_type_1g_sx_core1) + sfp_type == ixgbe_sfp_type_1g_sx_core1 || + sfp_type == ixgbe_sfp_type_1g_bx_core1) sfp_type = ixgbe_sfp_type_srlr_core1; /* Read offset to PHY init contents */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index beedcb7bec0d..14aa2ca51f70 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -17,6 +17,7 @@ #define IXGBE_SFF_1GBE_COMP_CODES 0x6 #define IXGBE_SFF_10GBE_COMP_CODES 0x3 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 +#define IXGBE_SFF_BITRATE_NOMINAL 0xC #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C #define IXGBE_SFF_SFF_8472_SWAP 0x5C #define IXGBE_SFF_SFF_8472_COMP 0x5E @@ -39,6 +40,7 @@ #define IXGBE_SFF_1GBASESX_CAPABLE 0x1 #define IXGBE_SFF_1GBASELX_CAPABLE 0x2 #define IXGBE_SFF_1GBASET_CAPABLE 0x8 +#define IXGBE_SFF_BASEBX10_CAPABLE 0x64 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 #define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index d44c58130be2..ed440dd0c4f9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -3210,6 +3210,9 @@ enum ixgbe_sfp_type { ixgbe_sfp_type_1g_sx_core1 = 12, ixgbe_sfp_type_1g_lx_core0 = 13, ixgbe_sfp_type_1g_lx_core1 = 14, + ixgbe_sfp_type_1g_bx_core0 = 15, + ixgbe_sfp_type_1g_bx_core1 = 16, + ixgbe_sfp_type_not_present = 0xFFFE, ixgbe_sfp_type_unknown = 0xFFFF }; |