summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-18 15:08:35 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-18 15:08:35 -0700
commit2af170dd241810212cbdbdc802ba7d39e3fb23b9 (patch)
tree3d16719aa102444337f161c457502704a4967a53
parentab08ed1770140ebcf1be1657087689832b755874 (diff)
parent3be6cbd73f74b4a3da82cc7d6e1688a4ae595fc7 (diff)
downloadlinux-2af170dd241810212cbdbdc802ba7d39e3fb23b9.tar.gz
linux-2af170dd241810212cbdbdc802ba7d39e3fb23b9.tar.bz2
linux-2af170dd241810212cbdbdc802ba7d39e3fb23b9.zip
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] kill ata_sg_is_last() Update libata driver for bf548 atapi controller against the 2.6.24 tree. libata-sff: Correct use of check_status() drivers/ata: add support to Freescale 3.0Gbps SATA Controller pata_acpi: fix build breakage if !CONFIG_PM
-rw-r--r--drivers/ata/Kconfig16
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/libata-sff.c2
-rw-r--r--drivers/ata/pata_acpi.c2
-rw-r--r--drivers/ata/pata_bf54x.c77
-rw-r--r--drivers/ata/pdc_adma.c9
-rw-r--r--drivers/ata/sata_fsl.c1490
-rw-r--r--drivers/ata/sata_mv.c26
-rw-r--r--drivers/ata/sata_sil24.c11
-rw-r--r--drivers/scsi/ipr.c11
-rw-r--r--include/linux/libata.h12
11 files changed, 1567 insertions, 90 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 33f5eb038773..ba63619ae5df 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -182,6 +182,15 @@ config PATA_ACPI
firmware in the BIOS. This driver can sometimes handle
otherwise unsupported hardware.
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on PPC_MPC837x
+ help
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
+
+ If unsure, say N.
+
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -641,11 +650,4 @@ config PATA_BF54X
If unsure, say N.
-config PATA_BF54X_DMA
- bool "DMA mode"
- depends on PATA_BF54X
- default y
- help
- Enable DMA mode for Blackfin ATAPI controller.
-
endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6bdc307649e6..b13feb2c5dae 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SATA_ULI) += sata_uli.o
obj-$(CONFIG_SATA_MV) += sata_mv.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
+obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c7501058d07d..f9e4cd527942 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -156,7 +156,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_check_status(ap);
+ tf->command = ata_chk_status(ap);
tf->feature = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 5d3920f6fd69..0f6f7bcc3def 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -370,8 +370,10 @@ static struct pci_driver pacpi_pci_driver = {
.id_table = pacpi_pci_tbl,
.probe = pacpi_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init pacpi_init(void)
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 747549e4563a..b5e38426b815 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1092,14 +1092,15 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
* Note: Original code is ata_std_softreset().
*/
-static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
+static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
u8 err;
- if (ata_port_offline(ap)) {
+ if (ata_link_offline(link)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
@@ -1122,9 +1123,11 @@ static int bfin_std_softreset(struct ata_port *ap, unsigned int *classes,
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(ap, 0, &err);
+ classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(ap, 1, &err);
+ classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ devmask & (1 << 1), &err);
out:
return 0;
@@ -1167,7 +1170,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
- struct ata_port *ap = adev->ap;
+ struct ata_port *ap = adev->link->ap;
unsigned int words = buflen >> 1;
unsigned short *buf16 = (u16 *) buf;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1206,7 +1209,10 @@ static void bfin_irq_clear(struct ata_port *ap)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
pr_debug("in atapi irq clear\n");
- ATAPI_SET_INT_STATUS(base, 0x1FF);
+
+ ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
+ | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
+ | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
}
/**
@@ -1234,33 +1240,6 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
}
/**
- * bfin_irq_ack - Acknowledge a device interrupt.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_irq_ack().
- */
-
-static unsigned char bfin_irq_ack(struct ata_port *ap, unsigned int chk_drq)
-{
- void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
- unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
- unsigned char status;
-
- pr_debug("in atapi irq ack\n");
- status = ata_busy_wait(ap, bits, 1000);
- if (status & bits)
- if (ata_msg_err(ap))
- dev_err(ap->dev, "abnormal status 0x%X\n", status);
-
- /* get controller status; clear intr, err bits */
- ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
- | MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
- | MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
-
- return bfin_bmdma_status(ap);
-}
-
-/**
* bfin_bmdma_freeze - Freeze DMA controller port
* @ap: port to freeze
*
@@ -1308,8 +1287,9 @@ void bfin_bmdma_thaw(struct ata_port *ap)
* Note: Original code is ata_std_postreset().
*/
-static void bfin_std_postreset(struct ata_port *ap, unsigned int *classes)
+static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
/* re-enable interrupts */
@@ -1395,7 +1375,6 @@ static struct scsi_host_template bfin_sht = {
};
static const struct ata_port_operations bfin_pata_ops = {
- .port_disable = ata_port_disable,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
@@ -1423,7 +1402,6 @@ static const struct ata_port_operations bfin_pata_ops = {
.irq_handler = ata_interrupt,
.irq_clear = bfin_irq_clear,
.irq_on = bfin_irq_on,
- .irq_ack = bfin_irq_ack,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
@@ -1437,11 +1415,7 @@ static struct ata_port_info bfin_port_info[] = {
| ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0,
-#ifdef CONFIG_PATA_BF54X_DMA
- .udma_mask = ATA_UDMA5,
-#else
.udma_mask = 0,
-#endif
.port_ops = &bfin_pata_ops,
},
};
@@ -1607,9 +1581,25 @@ static struct platform_driver bfin_atapi_driver = {
},
};
+#define ATAPI_MODE_SIZE 10
+static char bfin_atapi_mode[ATAPI_MODE_SIZE];
+
static int __init bfin_atapi_init(void)
{
pr_info("register bfin atapi driver\n");
+
+ switch(bfin_atapi_mode[0]) {
+ case 'p':
+ case 'P':
+ break;
+ case 'm':
+ case 'M':
+ bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
+ break;
+ default:
+ bfin_port_info[0].udma_mask = ATA_UDMA5;
+ };
+
return platform_driver_register(&bfin_atapi_driver);
}
@@ -1620,6 +1610,13 @@ static void __exit bfin_atapi_exit(void)
module_init(bfin_atapi_init);
module_exit(bfin_atapi_exit);
+/*
+ * ATAPI mode:
+ * pio/PIO
+ * udma/UDMA (default)
+ * mwdma/MWDMA
+ */
+module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 8d1b03d5bcb1..199f7e150eb3 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -318,7 +318,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
struct scatterlist *sg;
struct ata_port *ap = qc->ap;
struct adma_port_priv *pp = ap->private_data;
- u8 *buf = pp->pkt;
+ u8 *buf = pp->pkt, *last_buf = NULL;
int i = (2 + buf[3]) * 8;
u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
@@ -334,8 +334,7 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
*(__le32 *)(buf + i) = cpu_to_le32(len);
i += 4;
- if (ata_sg_is_last(sg, qc))
- pFLAGS |= pEND;
+ last_buf = &buf[i];
buf[i++] = pFLAGS;
buf[i++] = qc->dev->dma_mode & 0xf;
buf[i++] = 0; /* pPKLW */
@@ -348,6 +347,10 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
(unsigned long)addr, len);
}
+
+ if (likely(last_buf))
+ *last_buf |= pEND;
+
return i;
}
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
new file mode 100644
index 000000000000..b4c37b9e413c
--- /dev/null
+++ b/drivers/ata/sata_fsl.c
@@ -0,0 +1,1490 @@
+/*
+ * drivers/ata/sata_fsl.c
+ *
+ * Freescale 3.0Gbps SATA device driver
+ *
+ * Author: Ashish Kalra <ashish.kalra@freescale.com>
+ * Li Yang <leoli@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include <asm/io.h>
+#include <linux/of_platform.h>
+
+/* Controller information */
+enum {
+ SATA_FSL_QUEUE_DEPTH = 16,
+ SATA_FSL_MAX_PRD = 63,
+ SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1,
+ SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */
+
+ SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY),
+
+ SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
+ SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
+ SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
+
+ /*
+ * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
+ * chained indirect PRDEs upto a max count of 63.
+ * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
+ * be setup as an indirect descriptor, pointing to it's next
+ * (contigious) PRDE. Though chained indirect PRDE arrays are
+ * supported,it will be more efficient to use a direct PRDT and
+ * a single chain/link to indirect PRDE array/PRDT.
+ */
+
+ SATA_FSL_CMD_DESC_CFIS_SZ = 32,
+ SATA_FSL_CMD_DESC_SFIS_SZ = 32,
+ SATA_FSL_CMD_DESC_ACMD_SZ = 16,
+ SATA_FSL_CMD_DESC_RSRVD = 16,
+
+ SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ +
+ SATA_FSL_CMD_DESC_SFIS_SZ +
+ SATA_FSL_CMD_DESC_ACMD_SZ +
+ SATA_FSL_CMD_DESC_RSRVD +
+ SATA_FSL_MAX_PRD * 16),
+
+ SATA_FSL_CMD_DESC_OFFSET_TO_PRDT =
+ (SATA_FSL_CMD_DESC_CFIS_SZ +
+ SATA_FSL_CMD_DESC_SFIS_SZ +
+ SATA_FSL_CMD_DESC_ACMD_SZ +
+ SATA_FSL_CMD_DESC_RSRVD),
+
+ SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
+ SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
+ SATA_FSL_CMD_DESC_AR_SZ),
+
+ /*
+ * MPC8315 has two SATA controllers, SATA1 & SATA2
+ * (one port per controller)
+ * MPC837x has 2/4 controllers, one port per controller
+ */
+
+ SATA_FSL_MAX_PORTS = 1,
+
+ SATA_FSL_IRQ_FLAG = IRQF_SHARED,
+};
+
+/*
+* Host Controller command register set - per port
+*/
+enum {
+ CQ = 0,
+ CA = 8,
+ CC = 0x10,
+ CE = 0x18,
+ DE = 0x20,
+ CHBA = 0x24,
+ HSTATUS = 0x28,
+ HCONTROL = 0x2C,
+ CQPMP = 0x30,
+ SIGNATURE = 0x34,
+ ICC = 0x38,
+
+ /*
+ * Host Status Register (HStatus) bitdefs
+ */
+ ONLINE = (1 << 31),
+ GOING_OFFLINE = (1 << 30),
+ BIST_ERR = (1 << 29),
+
+ FATAL_ERR_HC_MASTER_ERR = (1 << 18),
+ FATAL_ERR_PARITY_ERR_TX = (1 << 17),
+ FATAL_ERR_PARITY_ERR_RX = (1 << 16),
+ FATAL_ERR_DATA_UNDERRUN = (1 << 13),
+ FATAL_ERR_DATA_OVERRUN = (1 << 12),
+ FATAL_ERR_CRC_ERR_TX = (1 << 11),
+ FATAL_ERR_CRC_ERR_RX = (1 << 10),
+ FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
+ FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
+
+ FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
+ FATAL_ERR_PARITY_ERR_TX |
+ FATAL_ERR_PARITY_ERR_RX |
+ FATAL_ERR_DATA_UNDERRUN |
+ FATAL_ERR_DATA_OVERRUN |
+ FATAL_ERR_CRC_ERR_TX |
+ FATAL_ERR_CRC_ERR_RX |
+ FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
+
+ INT_ON_FATAL_ERR = (1 << 5),
+ INT_ON_PHYRDY_CHG = (1 << 4),
+
+ INT_ON_SIGNATURE_UPDATE = (1 << 3),
+ INT_ON_SNOTIFY_UPDATE = (1 << 2),
+ INT_ON_SINGL_DEVICE_ERR = (1 << 1),
+ INT_ON_CMD_COMPLETE = 1,
+
+ INT_ON_ERROR = INT_ON_FATAL_ERR |
+ INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
+
+ /*
+ * Host Control Register (HControl) bitdefs
+ */
+ HCONTROL_ONLINE_PHY_RST = (1 << 31),
+ HCONTROL_FORCE_OFFLINE = (1 << 30),
+ HCONTROL_PARITY_PROT_MOD = (1 << 14),
+ HCONTROL_DPATH_PARITY = (1 << 12),
+ HCONTROL_SNOOP_ENABLE = (1 << 10),
+ HCONTROL_PMP_ATTACHED = (1 << 9),
+ HCONTROL_COPYOUT_STATFIS = (1 << 8),
+ IE_ON_FATAL_ERR = (1 << 5),
+ IE_ON_PHYRDY_CHG = (1 << 4),
+ IE_ON_SIGNATURE_UPDATE = (1 << 3),
+ IE_ON_SNOTIFY_UPDATE = (1 << 2),
+ IE_ON_SINGL_DEVICE_ERR = (1 << 1),
+ IE_ON_CMD_COMPLETE = 1,
+
+ DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
+ IE_ON_SIGNATURE_UPDATE |
+ IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
+
+ EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
+ DATA_SNOOP_ENABLE = (1 << 22),
+};
+
+/*
+ * SATA Superset Registers
+ */
+enum {
+ SSTATUS = 0,
+ SERROR = 4,
+ SCONTROL = 8,
+ SNOTIFY = 0xC,
+};
+
+/*
+ * Control Status Register Set
+ */
+enum {
+ TRANSCFG = 0,
+ TRANSSTATUS = 4,
+ LINKCFG = 8,
+ LINKCFG1 = 0xC,
+ LINKCFG2 = 0x10,
+ LINKSTATUS = 0x14,
+ LINKSTATUS1 = 0x18,
+ PHYCTRLCFG = 0x1C,
+ COMMANDSTAT = 0x20,
+};
+
+/* PHY (link-layer) configuration control */
+enum {
+ PHY_BIST_ENABLE = 0x01,
+};
+
+/*
+ * Command Header Table entry, i.e, command slot
+ * 4 Dwords per command slot, command header size == 64 Dwords.
+ */
+struct cmdhdr_tbl_entry {
+ u32 cda;
+ u32 prde_fis_len;
+ u32 ttl;
+ u32 desc_info;
+};
+
+/*
+ * Description information bitdefs
+ */
+enum {
+ VENDOR_SPECIFIC_BIST = (1 << 10),
+ CMD_DESC_SNOOP_ENABLE = (1 << 9),
+ FPDMA_QUEUED_CMD = (1 << 8),
+ SRST_CMD = (1 << 7),
+ BIST = (1 << 6),
+ ATAPI_CMD = (1 << 5),
+};
+
+/*
+ * Command Descriptor
+ */
+struct command_desc {
+ u8 cfis[8 * 4];
+ u8 sfis[8 * 4];
+ u8 acmd[4 * 4];
+ u8 fill[4 * 4];
+ u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
+ u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
+};
+
+/*
+ * Physical region table descriptor(PRD)
+ */
+
+struct prde {
+ u32 dba;
+ u8 fill[2 * 4];
+ u32 ddc_and_ext;
+};
+
+/*
+ * ata_port private data
+ * This is our per-port instance data.
+ */
+struct sata_fsl_port_priv {
+ struct cmdhdr_tbl_entry *cmdslot;
+ dma_addr_t cmdslot_paddr;
+ struct command_desc *cmdentry;
+ dma_addr_t cmdentry_paddr;
+
+ /*
+ * SATA FSL controller has a Status FIS which should contain the
+ * received D2H FIS & taskfile registers. This SFIS is present in
+ * the command descriptor, and to have a ready reference to it,
+ * we are caching it here, quite similar to what is done in H/W on
+ * AHCI compliant devices by copying taskfile fields to a 32-bit
+ * register.
+ */
+
+ struct ata_taskfile tf;
+};
+
+/*
+ * ata_port->host_set private data
+ */
+struct sata_fsl_host_priv {
+ void __iomem *hcr_base;
+ void __iomem *ssr_base;
+ void __iomem *csr_base;
+};
+
+static inline unsigned int sata_fsl_tag(unsigned int tag,
+ void __iomem * hcr_base)
+{
+ /* We let libATA core do actual (queue) tag allocation */
+
+ /* all non NCQ/queued commands should have tag#0 */
+ if (ata_tag_internal(tag)) {
+ DPRINTK("mapping internal cmds to tag#0\n");
+ return 0;
+ }
+
+ if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
+ DPRINTK("tag %d invalid : out of range\n", tag);
+ return 0;
+ }
+
+ if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
+ DPRINTK("tag %d invalid : in use!!\n", tag);
+ return 0;
+ }
+
+ return tag;
+}
+
+static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
+ unsigned int tag, u32 desc_info,
+ u32 data_xfer_len, u8 num_prde,
+ u8 fis_len)
+{
+ dma_addr_t cmd_descriptor_address;
+
+ cmd_descriptor_address = pp->cmdentry_paddr +
+ tag * SATA_FSL_CMD_DESC_SIZE;
+
+ /* NOTE: both data_xfer_len & fis_len are Dword counts */
+
+ pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
+ pp->cmdslot[tag].prde_fis_len =
+ cpu_to_le32((num_prde << 16) | (fis_len << 2));
+ pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
+ pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F)));
+
+ VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
+ pp->cmdslot[tag].cda,
+ pp->cmdslot[tag].prde_fis_len,
+ pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
+
+}
+
+static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
+ u32 * ttl, dma_addr_t cmd_desc_paddr)
+{
+ struct scatterlist *sg;
+ unsigned int num_prde = 0;
+ u32 ttl_dwords = 0;
+
+ /*
+ * NOTE : direct & indirect prdt's are contigiously allocated
+ */
+ struct prde *prd = (struct prde *)&((struct command_desc *)
+ cmd_desc)->prdt;
+
+ struct prde *prd_ptr_to_indirect_ext = NULL;
+ unsigned indirect_ext_segment_sz = 0;
+ dma_addr_t indirect_ext_segment_paddr;
+
+ VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd);
+
+ indirect_ext_segment_paddr = cmd_desc_paddr +
+ SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
+
+ ata_for_each_sg(sg, qc) {
+ dma_addr_t sg_addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
+ sg_addr, sg_len);
+
+ /* warn if each s/g element is not dword aligned */
+ if (sg_addr & 0x03)
+ ata_port_printk(qc->ap, KERN_ERR,
+ "s/g addr unaligned : 0x%x\n", sg_addr);
+ if (sg_len & 0x03)
+ ata_port_printk(qc->ap, KERN_ERR,
+ "s/g len unaligned : 0x%x\n", sg_len);
+
+ if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) &&
+ !ata_sg_is_last(sg, qc)) {
+ VPRINTK("setting indirect prde\n");
+ prd_ptr_to_indirect_ext = prd;
+ prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
+ indirect_ext_segment_sz = 0;
+ ++prd;
+ ++num_prde;
+ }
+
+ ttl_dwords += sg_len;
+ prd->dba = cpu_to_le32(sg_addr);
+ prd->ddc_and_ext =
+ cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03));
+
+ VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
+ ttl_dwords, prd->dba, prd->ddc_and_ext);
+
+ ++num_prde;
+ ++prd;
+ if (prd_ptr_to_indirect_ext)
+ indirect_ext_segment_sz += sg_len;
+ }
+
+ if (prd_ptr_to_indirect_ext) {
+ /* set indirect extension flag along with indirect ext. size */
+ prd_ptr_to_indirect_ext->ddc_and_ext =
+ cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
+ DATA_SNOOP_ENABLE |
+ (indirect_ext_segment_sz & ~0x03)));
+ }
+
+ *ttl = ttl_dwords;
+ return num_prde;
+}
+
+static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct sata_fsl_port_priv *pp = ap->private_data;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+ struct command_desc *cd;
+ u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+ u32 num_prde = 0;
+ u32 ttl_dwords = 0;
+ dma_addr_t cd_paddr;
+
+ cd = (struct command_desc *)pp->cmdentry + tag;
+ cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
+
+ ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis);
+
+ VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
+ cd->cfis[0], cd->cfis[1], cd->cfis[2]);
+
+ if (qc->tf.protocol == ATA_PROT_NCQ) {
+ VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
+ cd->cfis[3], cd->cfis[11]);
+ }
+
+ /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
+ if (is_atapi_taskfile(&qc->tf)) {
+ desc_info |= ATAPI_CMD;
+ memset((void *)&cd->acmd, 0, 32);
+ memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
+ }
+
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ num_prde = sata_fsl_fill_sg(qc, (void *)cd,
+ &ttl_dwords, cd_paddr);
+
+ if (qc->tf.protocol == ATA_PROT_NCQ)
+ desc_info |= FPDMA_QUEUED_CMD;
+
+ sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
+ num_prde, 5);
+
+ VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
+ desc_info, ttl_dwords, num_prde);
+}
+
+static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+
+ VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
+ ioread32(CQ + hcr_base),
+ ioread32(CA + hcr_base),
+ ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+
+ /* Simply queue command to the controller/device */
+ iowrite32(1 << tag, CQ + hcr_base);
+
+ VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
+ tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
+
+ VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
+ ioread32(CE + hcr_base),
+ ioread32(DE + hcr_base),
+ ioread32(CC + hcr_base), ioread32(COMMANDSTAT + csr_base));
+
+ return 0;
+}
+
+static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
+ u32 val)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *ssr_base = host_priv->ssr_base;
+ unsigned int sc_reg;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ sc_reg = 0;
+ break;
+ case SCR_ERROR:
+ sc_reg = 1;
+ break;
+ case SCR_CONTROL:
+ sc_reg = 2;
+ break;
+ case SCR_ACTIVE:
+ sc_reg = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
+
+ iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4));
+ return 0;
+}
+
+static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
+ u32 *val)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *ssr_base = host_priv->ssr_base;
+ unsigned int sc_reg;
+
+ switch (sc_reg_in) {
+ case SCR_STATUS:
+ sc_reg = 0;
+ break;
+ case SCR_ERROR:
+ sc_reg = 1;
+ break;
+ case SCR_CONTROL:
+ sc_reg = 2;
+ break;
+ case SCR_ACTIVE:
+ sc_reg = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
+
+ *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4));
+ return 0;
+}
+
+static void sata_fsl_freeze(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
+ ioread32(CQ + hcr_base),
+ ioread32(CA + hcr_base),
+ ioread32(CE + hcr_base), ioread32(DE + hcr_base));
+ VPRINTK("CmdStat = 0x%x\n", ioread32(csr_base + COMMANDSTAT));
+
+ /* disable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
+
+ VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
+ ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
+}
+
+static void sata_fsl_thaw(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ /* ack. any pending IRQs for this controller/port */
+ temp = ioread32(hcr_base + HSTATUS);
+
+ VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
+
+ if (temp & 0x3F)
+ iowrite32((temp & 0x3F), hcr_base + HSTATUS);
+
+ /* enable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+ VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
+ ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
+}
+
+/*
+ * NOTE : 1st D2H FIS from device does not update sfis in command descriptor.
+ */
+static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd
+ *qc,
+ struct ata_port *ap)
+{
+ struct sata_fsl_port_priv *pp = ap->private_data;
+ u8 fis[6 * 4];
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+ struct command_desc *cd;
+
+ cd = pp->cmdentry + tag;
+
+ memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */
+ ata_tf_from_fis(fis, &pp->tf);
+}
+
+static u8 sata_fsl_check_status(struct ata_port *ap)
+{
+ struct sata_fsl_port_priv *pp = ap->private_data;
+
+ return pp->tf.command;
+}
+
+static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct sata_fsl_port_priv *pp = ap->private_data;
+
+ *tf = pp->tf;
+}
+
+static int sata_fsl_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct sata_fsl_port_priv *pp;
+ int retval;
+ void *mem;
+ dma_addr_t mem_dma;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ /*
+ * allocate per command dma alignment pad buffer, which is used
+ * internally by libATA to ensure that all transfers ending on
+ * unaligned boundaries are padded, to align on Dword boundaries
+ */
+ retval = ata_pad_alloc(ap, dev);
+ if (retval) {
+ kfree(pp);
+ return retval;
+ }
+
+ mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
+ GFP_KERNEL);
+ if (!mem) {
+ ata_pad_free(ap, dev);
+ kfree(pp);
+ return -ENOMEM;
+ }
+ memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ);
+
+ pp->cmdslot = mem;
+ pp->cmdslot_paddr = mem_dma;
+
+ mem += SATA_FSL_CMD_SLOT_SIZE;
+ mem_dma += SATA_FSL_CMD_SLOT_SIZE;
+
+ pp->cmdentry = mem;
+ pp->cmdentry_paddr = mem_dma;
+
+ ap->private_data = pp;
+
+ VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
+ pp->cmdslot_paddr, pp->cmdentry_paddr);
+
+ /* Now, update the CHBA register in host controller cmd register set */
+ iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+ /*
+ * Now, we can bring the controller on-line & also initiate
+ * the COMINIT sequence, we simply return here and the boot-probing
+ * & device discovery process is re-initiated by libATA using a
+ * Softreset EH (dummy) session. Hence, boot probing and device
+ * discovey will be part of sata_fsl_softreset() callback.
+ */
+
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
+
+ VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+ VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA));
+
+ /*
+ * Workaround for 8315DS board 3gbps link-up issue,
+ * currently limit SATA port to GEN1 speed
+ */
+ sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+ temp &= ~(0xF << 4);
+ temp |= (0x1 << 4);
+ sata_fsl_scr_write(ap, SCR_CONTROL, temp);
+
+ sata_fsl_scr_read(ap, SCR_CONTROL, &temp);
+ dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
+ temp);
+
+ return 0;
+}
+
+static void sata_fsl_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host->dev;
+ struct sata_fsl_port_priv *pp = ap->private_data;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ /*
+ * Force host controller to go off-line, aborting current operations
+ */
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_ONLINE_PHY_RST;
+ temp |= HCONTROL_FORCE_OFFLINE;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* Poll for controller to go offline - should happen immediately */
+ ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
+
+ ap->private_data = NULL;
+ dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
+ pp->cmdslot, pp->cmdslot_paddr);
+
+ ata_pad_free(ap, dev);
+ kfree(pp);
+}
+
+static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ struct ata_taskfile tf;
+ u32 temp;
+
+ temp = ioread32(hcr_base + SIGNATURE);
+
+ VPRINTK("raw sig = 0x%x\n", temp);
+ VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+ tf.lbah = (temp >> 24) & 0xff;
+ tf.lbam = (temp >> 16) & 0xff;
+ tf.lbal = (temp >> 8) & 0xff;
+ tf.nsect = temp & 0xff;
+
+ return ata_dev_classify(&tf);
+}
+
+static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
+{
+ struct sata_fsl_port_priv *pp = ap->private_data;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+ struct ata_taskfile tf;
+ u8 *cfis;
+ u32 Serror;
+ int i = 0;
+ struct ata_queued_cmd qc;
+ u8 *buf;
+ dma_addr_t dma_address;
+ struct scatterlist *sg;
+ unsigned long start_jiffies;
+
+ DPRINTK("in xx_softreset\n");
+
+try_offline_again:
+ /*
+ * Force host controller to go off-line, aborting current operations
+ */
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_ONLINE_PHY_RST;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* Poll for controller to go offline */
+ temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500);
+
+ if (temp & ONLINE) {
+ ata_port_printk(ap, KERN_ERR,
+ "Softreset failed, not off-lined %d\n", i);
+
+ /*
+ * Try to offline controller atleast twice
+ */
+ i++;
+ if (i == 2)
+ goto err;
+ else
+ goto try_offline_again;
+ }
+
+ DPRINTK("softreset, controller off-lined\n");
+ VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+ /*
+ * PHY reset should remain asserted for atleast 1ms
+ */
+ msleep(1);
+
+ /*
+ * Now, bring the host controller online again, this can take time
+ * as PHY reset and communication establishment, 1st D2H FIS and
+ * device signature update is done, on safe side assume 500ms
+ * NOTE : Host online status may be indicated immediately!!
+ */
+
+ temp = ioread32(hcr_base + HCONTROL);
+ temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
+
+ if (!(temp & ONLINE)) {
+ ata_port_printk(ap, KERN_ERR,
+ "Softreset failed, not on-lined\n");
+ goto err;
+ }
+
+ DPRINTK("softreset, controller off-lined & on-lined\n");
+ VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+ /*
+ * First, wait for the PHYRDY change to occur before waiting for
+ * the signature, and also verify if SStatus indicates device
+ * presence
+ */
+
+ temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
+ if ((!(temp & 0x10)) || ata_port_offline(ap)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "No Device OR PHYRDY change,Hstatus = 0x%x\n",
+ ioread32(hcr_base + HSTATUS));
+ goto err;
+ }
+
+ /*
+ * Wait for the first D2H from device,i.e,signature update notification
+ */
+ start_jiffies = jiffies;
+ temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10,
+ 500, jiffies_to_msecs(deadline - start_jiffies));
+
+ if ((temp & 0xFF) != 0x18) {
+ ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
+ goto err;
+ } else {
+ ata_port_printk(ap, KERN_INFO,
+ "Signature Update detected @ %d msecs\n",
+ jiffies_to_msecs(jiffies - start_jiffies));
+ }
+
+ /*
+ * Send a device reset (SRST) explicitly on command slot #0
+ * Check : will the command queue (reg) be cleared during offlining ??
+ * Also we will be online only if Phy commn. has been established
+ * and device presence has been detected, therefore if we have
+ * reached here, we can send a command to the target device
+ */
+
+ if (ap->sactive)
+ goto skip_srst_do_ncq_error_handling;
+
+ DPRINTK("Sending SRST/device reset\n");
+
+ ata_tf_init(ap->device, &tf);
+ cfis = (u8 *) & pp->cmdentry->cfis;
+
+ /* device reset/SRST is a control register update FIS, uses tag0 */
+ sata_fsl_setup_cmd_hdr_entry(pp, 0,
+ SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+
+ tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
+ ata_tf_to_fis(&tf, 0, 0, cfis);
+
+ DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
+ cfis[0], cfis[1], cfis[2], cfis[3]);
+
+ /*
+ * Queue SRST command to the controller/device, ensure that no
+ * other commands are active on the controller/device
+ */
+
+ DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
+ ioread32(CQ + hcr_base),
+ ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+ iowrite32(0xFFFF, CC + hcr_base);
+ iowrite32(1, CQ + hcr_base);
+
+ temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
+ if (temp & 0x1) {
+ ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
+
+ DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
+ ioread32(CQ + hcr_base),
+ ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+ sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
+
+ DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+ DPRINTK("Serror = 0x%x\n", Serror);
+ goto err;
+ }
+
+ msleep(1);
+
+ /*
+ * SATA device enters reset state after receving a Control register
+ * FIS with SRST bit asserted and it awaits another H2D Control reg.
+ * FIS with SRST bit cleared, then the device does internal diags &
+ * initialization, followed by indicating it's initialization status
+ * using ATA signature D2H register FIS to the host controller.
+ */
+
+ sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+
+ tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
+ ata_tf_to_fis(&tf, 0, 0, cfis);
+
+ iowrite32(1, CQ + hcr_base);
+ msleep(150); /* ?? */
+
+ /*
+ * The above command would have signalled an interrupt on command
+ * complete, which needs special handling, by clearing the Nth
+ * command bit of the CCreg
+ */
+ iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
+ goto check_device_signature;
+
+skip_srst_do_ncq_error_handling:
+
+ VPRINTK("Sending read log ext(10h) command\n");
+
+ memset(&qc, 0, sizeof(struct ata_queued_cmd));
+ ata_tf_init(ap->device, &tf);
+
+ tf.command = ATA_CMD_READ_LOG_EXT;
+ tf.lbal = ATA_LOG_SATA_NCQ;
+ tf.nsect = 1;
+ tf.hob_nsect = 0;
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
+ tf.protocol = ATA_PROT_PIO;
+
+ qc.tag = ATA_TAG_INTERNAL;
+ qc.scsicmd = NULL;
+ qc.ap = ap;
+ qc.dev = ap->device;
+
+ qc.tf = tf;
+ qc.flags |= ATA_QCFLAG_RESULT_TF;
+ qc.dma_dir = DMA_FROM_DEVICE;
+
+ buf = ap->sector_buf;
+ ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE);
+
+ /*
+ * Need to DMA-map the memory buffer associated with the command
+ */
+
+ sg = qc.__sg;
+ dma_address = dma_map_single(ap->dev, qc.buf_virt,
+ sg->length, DMA_FROM_DEVICE);
+
+ sg_dma_address(sg) = dma_address;
+ sg_dma_len(sg) = sg->length;
+
+ VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length);
+
+ sata_fsl_qc_prep(&qc);
+ sata_fsl_qc_issue(&qc);
+
+ temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
+ if (temp & 0x1) {
+ VPRINTK("READ_LOG_EXT_10H issue failed\n");
+
+ VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
+ ioread32(CQ + hcr_base),
+ ioread32(CA + hcr_base), ioread32(CC + hcr_base));
+
+ sata_fsl_scr_read(ap, SCR_ERROR, &Serror);
+
+ VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+ VPRINTK("Serror = 0x%x\n", Serror);
+ goto err;
+ }
+
+ iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
+
+ check_device_signature:
+
+ DPRINTK("SATA FSL : Now checking device signature\n");
+
+ *class = ATA_DEV_NONE;
+
+ /* Verify if SStatus indicates device presence */
+ if (ata_port_online(ap)) {
+ /*
+ * if we are here, device presence has been detected,
+ * 1st D2H FIS would have been received, but sfis in
+ * command desc. is not updated, but signature register
+ * would have been updated
+ */
+
+ *class = sata_fsl_dev_classify(ap);
+
+ DPRINTK("class = %d\n", *class);
+ VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
+ VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
+ }
+
+ return 0;
+
+err:
+ return -EIO;
+}
+
+static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
+{
+ int retval;
+
+ retval = sata_std_hardreset(ap, class, deadline);
+
+ DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval);
+
+ return retval;
+}
+
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+ DPRINTK("in xx_error_handler\n");
+
+ /* perform recovery */
+ ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset,
+ ata_std_postreset);
+}
+
+static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ if (qc->err_mask) {
+ /* make DMA engine forget about the failed command */
+
+ }
+}
+
+static void sata_fsl_irq_clear(struct ata_port *ap)
+{
+ /* unused */
+}
+
+static void sata_fsl_error_intr(struct ata_port *ap)
+{
+ struct ata_eh_info *ehi = &ap->eh_info;
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 hstatus, dereg, cereg = 0, SError = 0;
+ unsigned int err_mask = 0, action = 0;
+ struct ata_queued_cmd *qc;
+ int freeze = 0;
+
+ hstatus = ioread32(hcr_base + HSTATUS);
+ cereg = ioread32(hcr_base + CE);
+
+ ata_ehi_clear_desc(ehi);
+
+ /*
+ * Handle & Clear SError
+ */
+
+ sata_fsl_scr_read(ap, SCR_ERROR, &SError);
+ if (unlikely(SError & 0xFFFF0000)) {
+ sata_fsl_scr_write(ap, SCR_ERROR, SError);
+ err_mask |= AC_ERR_ATA_BUS;
+ }
+
+ DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
+ hstatus, cereg, ioread32(hcr_base + DE), SError);
+
+ /* handle single device errors */
+ if (cereg) {
+ /*
+ * clear the command error, also clears queue to the device
+ * in error, and we can (re)issue commands to this device.
+ * When a device is in error all commands queued into the
+ * host controller and at the device are considered aborted
+ * and the queue for that device is stopped. Now, after
+ * clearing the device error, we can issue commands to the
+ * device to interrogate it to find the source of the error.
+ */
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
+ ioread32(hcr_base + CE), ioread32(hcr_base + DE));
+ /*
+ * We should consider this as non fatal error, and TF must
+ * be updated as done below.
+ */
+
+ err_mask |= AC_ERR_DEV;
+ }
+
+ /* handle fatal errors */
+ if (hstatus & FATAL_ERROR_DECODE) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_SOFTRESET;
+ /* how will fatal error interrupts be completed ?? */
+ freeze = 1;
+ }
+
+ /* Handle PHYRDY change notification */
+ if (hstatus & INT_ON_PHYRDY_CHG) {
+ DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+ /* Setup a soft-reset EH action */
+ ata_ehi_hotplugged(ehi);
+ freeze = 1;
+ }
+
+ /* record error info */
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+
+ if (qc) {
+ sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+ qc->err_mask |= err_mask;
+ } else
+ ehi->err_mask |= err_mask;
+
+ ehi->action |= action;
+ ehi->serror |= SError;
+
+ /* freeze or abort */
+ if (freeze)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void sata_fsl_qc_complete(struct ata_queued_cmd *qc)
+{
+ if (qc->flags & ATA_QCFLAG_RESULT_TF) {
+ DPRINTK("xx_qc_complete called\n");
+ sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+ }
+}
+
+static void sata_fsl_host_intr(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 hstatus, qc_active = 0;
+ struct ata_queued_cmd *qc;
+ u32 SError;
+
+ hstatus = ioread32(hcr_base + HSTATUS);
+
+ sata_fsl_scr_read(ap, SCR_ERROR, &SError);
+
+ if (unlikely(SError & 0xFFFF0000)) {
+ DPRINTK("serror @host_intr : 0x%x\n", SError);
+ sata_fsl_error_intr(ap);
+
+ }
+
+ if (unlikely(hstatus & INT_ON_ERROR)) {
+ DPRINTK("error interrupt!!\n");
+ sata_fsl_error_intr(ap);
+ return;
+ }
+
+ if (ap->sactive) { /* only true for NCQ commands */
+ int i;
+ /* Read command completed register */
+ qc_active = ioread32(hcr_base + CC);
+ /* clear CC bit, this will also complete the interrupt */
+ iowrite32(qc_active, hcr_base + CC);
+
+ DPRINTK("Status of all queues :\n");
+ DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
+ qc_active, ioread32(hcr_base + CA),
+ ioread32(hcr_base + CE));
+
+ for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
+ if (qc_active & (1 << i)) {
+ qc = ata_qc_from_tag(ap, i);
+ if (qc) {
+ sata_fsl_qc_complete(qc);
+ ata_qc_complete(qc);
+ }
+ DPRINTK
+ ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
+ i, ioread32(hcr_base + CC),
+ ioread32(hcr_base + CA));
+ }
+ }
+ return;
+
+ } else if (ap->qc_active) {
+ iowrite32(1, hcr_base + CC);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+
+ DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
+ ap->active_tag, ioread32(hcr_base + CC));
+
+ if (qc) {
+ sata_fsl_qc_complete(qc);
+ ata_qc_complete(qc);
+ }
+ } else {
+ /* Spurious Interrupt!! */
+ DPRINTK("spurious interrupt!!, CC = 0x%x\n",
+ ioread32(hcr_base + CC));
+ return;
+ }
+}
+
+static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct sata_fsl_host_priv *host_priv = host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 interrupt_enables;
+ unsigned handled = 0;
+ struct ata_port *ap;
+
+ /* ack. any pending IRQs for this controller/port */
+ interrupt_enables = ioread32(hcr_base + HSTATUS);
+ interrupt_enables &= 0x3F;
+
+ DPRINTK("interrupt status 0x%x\n", interrupt_enables);
+
+ if (!interrupt_enables)
+ return IRQ_NONE;
+
+ spin_lock(&host->lock);
+
+ /* Assuming one port per host controller */
+
+ ap = host->ports[0];
+ if (ap) {
+ sata_fsl_host_intr(ap);
+ } else {
+ dev_printk(KERN_WARNING, host->dev,
+ "interrupt on disabled port 0\n");
+ }
+
+ iowrite32(interrupt_enables, hcr_base + HSTATUS);
+ handled = 1;
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * Multiple ports are represented by multiple SATA controllers with
+ * one port per controller
+ */
+static int sata_fsl_init_controller(struct ata_host *host)
+{
+ struct sata_fsl_host_priv *host_priv = host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ /*
+ * NOTE : We cannot bring the controller online before setting
+ * the CHBA, hence main controller initialization is done as
+ * part of the port_start() callback
+ */
+
+ /* ack. any pending IRQs for this controller/port */
+ temp = ioread32(hcr_base + HSTATUS);
+ if (temp & 0x3F)
+ iowrite32((temp & 0x3F), hcr_base + HSTATUS);
+
+ /* Keep interrupts disabled on the controller */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
+
+ /* Disable interrupt coalescing control(icc), for the moment */
+ DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
+ iowrite32(0x01000000, hcr_base + ICC);
+
+ /* clear error registers, SError is cleared by libATA */
+ iowrite32(0x00000FFFF, hcr_base + CE);
+ iowrite32(0x00000FFFF, hcr_base + DE);
+
+ /* initially assuming no Port multiplier, set CQPMP to 0 */
+ iowrite32(0x0, hcr_base + CQPMP);
+
+ /*
+ * host controller will be brought on-line, during xx_port_start()
+ * callback, that should also initiate the OOB, COMINIT sequence
+ */
+
+ DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
+ DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
+
+ return 0;
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_fsl_sht = {
+ .module = THIS_MODULE,
+ .name = "sata_fsl",
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .change_queue_depth = ata_scsi_change_queue_depth,
+ .can_queue = SATA_FSL_QUEUE_DEPTH,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = "sata_fsl",
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
+#endif
+};
+
+static const struct ata_port_operations sata_fsl_ops = {
+ .port_disable = ata_port_disable,
+
+ .check_status = sata_fsl_check_status,
+ .check_altstatus = sata_fsl_check_status,
+ .dev_select = ata_noop_dev_select,
+
+ .tf_read = sata_fsl_tf_read,
+
+ .qc_prep = sata_fsl_qc_prep,
+ .qc_issue = sata_fsl_qc_issue,
+ .irq_clear = sata_fsl_irq_clear,
+ .irq_on = ata_dummy_irq_on,
+ .irq_ack = ata_dummy_irq_ack,
+
+ .scr_read = sata_fsl_scr_read,
+ .scr_write = sata_fsl_scr_write,
+
+ .freeze = sata_fsl_freeze,
+ .thaw = sata_fsl_thaw,
+ .error_handler = sata_fsl_error_handler,
+ .post_internal_cmd = sata_fsl_post_internal_cmd,
+
+ .port_start = sata_fsl_port_start,
+ .port_stop = sata_fsl_port_stop,
+};
+
+static const struct ata_port_info sata_fsl_port_info[] = {
+ {
+ .flags = SATA_FSL_HOST_FLAGS,
+ .pio_mask = 0x1f, /* pio 0-4 */
+ .udma_mask = 0x7f, /* udma 0-6 */
+ .port_ops = &sata_fsl_ops,
+ },
+};
+
+static int sata_fsl_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ int retval = 0;
+ void __iomem *hcr_base = NULL;
+ void __iomem *ssr_base = NULL;
+ void __iomem *csr_base = NULL;
+ struct sata_fsl_host_priv *host_priv = NULL;
+ struct resource *r;
+ int irq;
+ struct ata_host *host;
+
+ struct ata_port_info pi = sata_fsl_port_info[0];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+
+ dev_printk(KERN_INFO, &ofdev->dev,
+ "Sata FSL Platform/CSB Driver init\n");
+
+ r = kmalloc(sizeof(struct resource), GFP_KERNEL);
+
+ hcr_base = of_iomap(ofdev->node, 0);
+ if (!hcr_base)
+ goto error_exit_with_cleanup;
+
+ ssr_base = hcr_base + 0x100;
+ csr_base = hcr_base + 0x140;
+
+ DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
+ DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
+ DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
+
+ host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
+ if (!host_priv)
+ goto error_exit_with_cleanup;
+
+ host_priv->hcr_base = hcr_base;
+ host_priv->ssr_base = ssr_base;
+ host_priv->csr_base = csr_base;
+
+ irq = irq_of_parse_and_map(ofdev->node, 0);
+ if (irq < 0) {
+ dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
+ goto error_exit_with_cleanup;
+ }
+
+ /* allocate host structure */
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
+
+ /* host->iomap is not used currently */
+ host->private_data = host_priv;
+
+ /* setup port(s) */
+
+ host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base;
+ host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base;
+
+ /* initialize host controller */
+ sata_fsl_init_controller(host);
+
+ /*
+ * Now, register with libATA core, this will also initiate the
+ * device discovery process, invoking our port_start() handler &
+ * error_handler() to execute a dummy Softreset EH session
+ */
+ ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
+ &sata_fsl_sht);
+
+ dev_set_drvdata(&ofdev->dev, host);
+
+ return 0;
+
+error_exit_with_cleanup:
+
+ if (hcr_base)
+ iounmap(hcr_base);
+ if (host_priv)
+ kfree(host_priv);
+
+ return retval;
+}
+
+static int sata_fsl_remove(struct of_device *ofdev)
+{
+ struct ata_host *host = dev_get_drvdata(&ofdev->dev);
+ struct sata_fsl_host_priv *host_priv = host->private_data;
+
+ ata_host_detach(host);
+
+ dev_set_drvdata(&ofdev->dev, NULL);
+
+ irq_dispose_mapping(host->irq);
+ iounmap(host_priv->hcr_base);
+ kfree(host_priv);
+
+ return 0;
+}
+
+static struct of_device_id fsl_sata_match[] = {
+ {
+ .compatible = "fsl,mpc8315-sata",
+ },
+ {
+ .compatible = "fsl,mpc8379-sata",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, fsl_sata_match);
+
+static struct of_platform_driver fsl_sata_driver = {
+ .name = "fsl-sata",
+ .match_table = fsl_sata_match,
+ .probe = sata_fsl_probe,
+ .remove = sata_fsl_remove,
+};
+
+static int __init sata_fsl_init(void)
+{
+ of_register_platform_driver(&fsl_sata_driver);
+ return 0;
+}
+
+static void __exit sata_fsl_exit(void)
+{
+ of_unregister_platform_driver(&fsl_sata_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
+MODULE_VERSION("1.10");
+
+module_init(sata_fsl_init);
+module_exit(sata_fsl_exit);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4df8311968e9..7f1b13e89cf7 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -421,7 +421,6 @@ static void mv_error_handler(struct ata_port *ap);
static void mv_post_int_cmd(struct ata_queued_cmd *qc);
static void mv_eh_freeze(struct ata_port *ap);
static void mv_eh_thaw(struct ata_port *ap);
-static int mv_slave_config(struct scsi_device *sdev);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -459,7 +458,7 @@ static struct scsi_host_template mv5_sht = {
.use_clustering = 1,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = mv_slave_config,
+ .slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
@@ -477,7 +476,7 @@ static struct scsi_host_template mv6_sht = {
.use_clustering = 1,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = mv_slave_config,
+ .slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
@@ -756,17 +755,6 @@ static void mv_irq_clear(struct ata_port *ap)
{
}
-static int mv_slave_config(struct scsi_device *sdev)
-{
- int rc = ata_scsi_slave_config(sdev);
- if (rc)
- return rc;
-
- blk_queue_max_phys_segments(sdev->request_queue, MV_MAX_SG_CT / 2);
-
- return 0; /* scsi layer doesn't check return value, sigh */
-}
-
static void mv_set_edma_ptrs(void __iomem *port_mmio,
struct mv_host_priv *hpriv,
struct mv_port_priv *pp)
@@ -1138,7 +1126,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
{
struct mv_port_priv *pp = qc->ap->private_data;
struct scatterlist *sg;
- struct mv_sg *mv_sg;
+ struct mv_sg *mv_sg, *last_sg = NULL;
mv_sg = pp->sg_tbl;
ata_for_each_sg(sg, qc) {
@@ -1159,13 +1147,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
sg_len -= len;
addr += len;
- if (!sg_len && ata_sg_is_last(sg, qc))
- mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
-
+ last_sg = mv_sg;
mv_sg++;
}
-
}
+
+ if (likely(last_sg))
+ last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
}
static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b0619278454a..26ebffc10f3e 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -796,16 +796,19 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
struct scatterlist *sg;
+ struct sil24_sge *last_sge = NULL;
ata_for_each_sg(sg, qc) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
sge->cnt = cpu_to_le32(sg_dma_len(sg));
- if (ata_sg_is_last(sg, qc))
- sge->flags = cpu_to_le32(SGE_TRM);
- else
- sge->flags = 0;
+ sge->flags = 0;
+
+ last_sge = sge;
sge++;
}
+
+ if (likely(last_sge))
+ last_sge->flags = cpu_to_le32(SGE_TRM);
}
static int sil24_qc_defer(struct ata_queued_cmd *qc)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index b41dfb539021..c316a0bcae6c 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5134,6 +5134,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
u32 ioadl_flags = 0;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
+ struct ipr_ioadl_desc *last_ioadl = NULL;
int len = qc->nbytes + qc->pad_len;
struct scatterlist *sg;
@@ -5156,11 +5157,13 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
ata_for_each_sg(sg, qc) {
ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
ioadl->address = cpu_to_be32(sg_dma_address(sg));
- if (ata_sg_is_last(sg, qc))
- ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
- else
- ioadl++;
+
+ last_ioadl = ioadl;
+ ioadl++;
}
+
+ if (likely(last_ioadl))
+ last_ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST);
}
/**
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 377e6d4d9be3..bc3b6fc7b98d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1037,18 +1037,6 @@ extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
/*
* qc helpers
*/
-static inline int
-ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
-{
- if (sg == &qc->pad_sgent)
- return 1;
- if (qc->pad_len)
- return 0;
- if (qc->n_iter == qc->n_elem)
- return 1;
- return 0;
-}
-
static inline struct scatterlist *
ata_qc_first_sg(struct ata_queued_cmd *qc)
{