CRIS v32: remove I2C bitbanging driver

Now that we have a gpiolib GPIO driver, the generic i2c-gpio driver
provides this functionality.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

4 files changed, 0 insertions, 786 deletions

diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index e6c523cc40bc..c5cbd2aac60e 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -149,24 +149,6 @@ config ETRAX_NANDBOOT
 	  Say Y if your boot code, kernel and root file system is in
 	  NAND flash. Say N if they are in NOR flash.
 
-config ETRAX_I2C
-	bool "I2C driver"
-	depends on ETRAX_ARCH_V32
-	help
-	  This option enables the I2C driver used by e.g. the RTC driver.
-
-config ETRAX_V32_I2C_DATA_PORT
-	string "I2C data pin"
-	depends on ETRAX_I2C
-	help
-	  The pin to use for I2C data.
-
-config ETRAX_V32_I2C_CLK_PORT
-	string "I2C clock pin"
-	depends on ETRAX_I2C
-	help
-	  The pin to use for I2C clock.
-
 config ETRAX_GPIO
 	bool "GPIO support"
 	depends on ETRAX_ARCH_V32
diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile
index 15fbfefced2c..b5a75fdce77b 100644
--- a/arch/cris/arch-v32/drivers/Makefile
+++ b/arch/cris/arch-v32/drivers/Makefile
@@ -7,6 +7,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
 obj-$(CONFIG_ETRAXFS)                   += mach-fs/
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)         += mach-a3/
 obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
-obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)	+= sync_serial.o
 obj-$(CONFIG_PCI)			+= pci/
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
deleted file mode 100644
index 3b2c82ce8147..000000000000
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ /dev/null
@@ -1,751 +0,0 @@
-/*!***************************************************************************
-*!
-*! FILE NAME  : i2c.c
-*!
-*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other
-*!              kernel modules (i2c_writereg/readreg) and from userspace using
-*!              ioctl()'s
-*!
-*! Nov 30 1998  Torbjorn Eliasson  Initial version.
-*!              Bjorn Wesen        Elinux kernel version.
-*! Jan 14 2000  Johan Adolfsson    Fixed PB shadow register stuff -
-*!                                 don't use PB_I2C if DS1302 uses same bits,
-*!                                 use PB.
-*| June 23 2003 Pieter Grimmerink  Added 'i2c_sendnack'. i2c_readreg now
-*|                                 generates nack on last received byte,
-*|                                 instead of ack.
-*|                                 i2c_getack changed data level while clock
-*|                                 was high, causing DS75 to see  a stop condition
-*!
-*! ---------------------------------------------------------------------------
-*!
-*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN
-*!
-*!***************************************************************************/
-
-/****************** INCLUDE FILES SECTION ***********************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-
-#include <asm/etraxi2c.h>
-
-#include <asm/io.h>
-#include <asm/delay.h>
-
-#include "i2c.h"
-
-/****************** I2C DEFINITION SECTION *************************/
-
-#define D(x)
-
-#define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
-static DEFINE_MUTEX(i2c_mutex);
-static const char i2c_name[] = "i2c";
-
-#define CLOCK_LOW_TIME            8
-#define CLOCK_HIGH_TIME           8
-#define START_CONDITION_HOLD_TIME 8
-#define STOP_CONDITION_HOLD_TIME  8
-#define ENABLE_OUTPUT 0x01
-#define ENABLE_INPUT 0x00
-#define I2C_CLOCK_HIGH 1
-#define I2C_CLOCK_LOW 0
-#define I2C_DATA_HIGH 1
-#define I2C_DATA_LOW 0
-
-#define i2c_enable()
-#define i2c_disable()
-
-/* enable or disable output-enable, to select output or input on the i2c bus */
-
-#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out)
-#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in)
-
-/* control the i2c clock and data signals */
-
-#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x)
-#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x)
-
-/* read a bit from the i2c interface */
-
-#define i2c_getbit() crisv32_io_rd(&cris_i2c_data)
-
-#define i2c_delay(usecs) udelay(usecs)
-
-static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
-
-/****************** VARIABLE SECTION ************************************/
-
-static struct crisv32_iopin cris_i2c_clk;
-static struct crisv32_iopin cris_i2c_data;
-
-/****************** FUNCTION DEFINITION SECTION *************************/
-
-
-/* generate i2c start condition */
-
-void
-i2c_start(void)
-{
-	/*
-	 * SCL=1 SDA=1
-	 */
-	i2c_dir_out();
-	i2c_delay(CLOCK_HIGH_TIME/6);
-	i2c_data(I2C_DATA_HIGH);
-	i2c_clk(I2C_CLOCK_HIGH);
-	i2c_delay(CLOCK_HIGH_TIME);
-	/*
-	 * SCL=1 SDA=0
-	 */
-	i2c_data(I2C_DATA_LOW);
-	i2c_delay(START_CONDITION_HOLD_TIME);
-	/*
-	 * SCL=0 SDA=0
-	 */
-	i2c_clk(I2C_CLOCK_LOW);
-	i2c_delay(CLOCK_LOW_TIME);
-}
-
-/* generate i2c stop condition */
-
-void
-i2c_stop(void)
-{
-	i2c_dir_out();
-
-	/*
-	 * SCL=0 SDA=0
-	 */
-	i2c_clk(I2C_CLOCK_LOW);
-	i2c_data(I2C_DATA_LOW);
-	i2c_delay(CLOCK_LOW_TIME*2);
-	/*
-	 * SCL=1 SDA=0
-	 */
-	i2c_clk(I2C_CLOCK_HIGH);
-	i2c_delay(CLOCK_HIGH_TIME*2);
-	/*
-	 * SCL=1 SDA=1
-	 */
-	i2c_data(I2C_DATA_HIGH);
-	i2c_delay(STOP_CONDITION_HOLD_TIME);
-
-	i2c_dir_in();
-}
-
-/* write a byte to the i2c interface */
-
-void
-i2c_outbyte(unsigned char x)
-{
-	int i;
-
-	i2c_dir_out();
-
-	for (i = 0; i < 8; i++) {
-		if (x & 0x80) {
-			i2c_data(I2C_DATA_HIGH);
-		} else {
-			i2c_data(I2C_DATA_LOW);
-		}
-
-		i2c_delay(CLOCK_LOW_TIME/2);
-		i2c_clk(I2C_CLOCK_HIGH);
-		i2c_delay(CLOCK_HIGH_TIME);
-		i2c_clk(I2C_CLOCK_LOW);
-		i2c_delay(CLOCK_LOW_TIME/2);
-		x <<= 1;
-	}
-	i2c_data(I2C_DATA_LOW);
-	i2c_delay(CLOCK_LOW_TIME/2);
-
-	/*
-	 * enable input
-	 */
-	i2c_dir_in();
-}
-
-/* read a byte from the i2c interface */
-
-unsigned char
-i2c_inbyte(void)
-{
-	unsigned char aBitByte = 0;
-	int i;
-
-	/* Switch off I2C to get bit */
-	i2c_disable();
-	i2c_dir_in();
-	i2c_delay(CLOCK_HIGH_TIME/2);
-
-	/* Get bit */
-	aBitByte |= i2c_getbit();
-
-	/* Enable I2C */
-	i2c_enable();
-	i2c_delay(CLOCK_LOW_TIME/2);
-
-	for (i = 1; i < 8; i++) {
-		aBitByte <<= 1;
-		/* Clock pulse */
-		i2c_clk(I2C_CLOCK_HIGH);
-		i2c_delay(CLOCK_HIGH_TIME);
-		i2c_clk(I2C_CLOCK_LOW);
-		i2c_delay(CLOCK_LOW_TIME);
-
-		/* Switch off I2C to get bit */
-		i2c_disable();
-		i2c_dir_in();
-		i2c_delay(CLOCK_HIGH_TIME/2);
-
-		/* Get bit */
-		aBitByte |= i2c_getbit();
-
-		/* Enable I2C */
-		i2c_enable();
-		i2c_delay(CLOCK_LOW_TIME/2);
-	}
-	i2c_clk(I2C_CLOCK_HIGH);
-	i2c_delay(CLOCK_HIGH_TIME);
-
-	/*
-	 * we leave the clock low, getbyte is usually followed
-	 * by sendack/nack, they assume the clock to be low
-	 */
-	i2c_clk(I2C_CLOCK_LOW);
-	return aBitByte;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_getack
-*#
-*# DESCRIPTION  : checks if ack was received from ic2
-*#
-*#--------------------------------------------------------------------------*/
-
-int
-i2c_getack(void)
-{
-	int ack = 1;
-	/*
-	 * enable output
-	 */
-	i2c_dir_out();
-	/*
-	 * Release data bus by setting
-	 * data high
-	 */
-	i2c_data(I2C_DATA_HIGH);
-	/*
-	 * enable input
-	 */
-	i2c_dir_in();
-	i2c_delay(CLOCK_HIGH_TIME/4);
-	/*
-	 * generate ACK clock pulse
-	 */
-	i2c_clk(I2C_CLOCK_HIGH);
-#if 0
-	/*
-	 * Use PORT PB instead of I2C
-	 * for input. (I2C not working)
-	 */
-	i2c_clk(1);
-	i2c_data(1);
-	/*
-	 * switch off I2C
-	 */
-	i2c_data(1);
-	i2c_disable();
-	i2c_dir_in();
-#endif
-
-	/*
-	 * now wait for ack
-	 */
-	i2c_delay(CLOCK_HIGH_TIME/2);
-	/*
-	 * check for ack
-	 */
-	if (i2c_getbit())
-		ack = 0;
-	i2c_delay(CLOCK_HIGH_TIME/2);
-	if (!ack) {
-		if (!i2c_getbit()) /* receiver pulld SDA low */
-			ack = 1;
-		i2c_delay(CLOCK_HIGH_TIME/2);
-	}
-
-   /*
-    * our clock is high now, make sure data is low
-    * before we enable our output. If we keep data high
-    * and enable output, we would generate a stop condition.
-    */
-#if 0
-   i2c_data(I2C_DATA_LOW);
-
-	/*
-	 * end clock pulse
-	 */
-	i2c_enable();
-	i2c_dir_out();
-#endif
-	i2c_clk(I2C_CLOCK_LOW);
-	i2c_delay(CLOCK_HIGH_TIME/4);
-	/*
-	 * enable output
-	 */
-	i2c_dir_out();
-	/*
-	 * remove ACK clock pulse
-	 */
-	i2c_data(I2C_DATA_HIGH);
-	i2c_delay(CLOCK_LOW_TIME/2);
-	return ack;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: I2C::sendAck
-*#
-*# DESCRIPTION  : Send ACK on received data
-*#
-*#--------------------------------------------------------------------------*/
-void
-i2c_sendack(void)
-{
-	/*
-	 * enable output
-	 */
-	i2c_delay(CLOCK_LOW_TIME);
-	i2c_dir_out();
-	/*
-	 * set ack pulse high
-	 */
-	i2c_data(I2C_DATA_LOW);
-	/*
-	 * generate clock pulse
-	 */
-	i2c_delay(CLOCK_HIGH_TIME/6);
-	i2c_clk(I2C_CLOCK_HIGH);
-	i2c_delay(CLOCK_HIGH_TIME);
-	i2c_clk(I2C_CLOCK_LOW);
-	i2c_delay(CLOCK_LOW_TIME/6);
-	/*
-	 * reset data out
-	 */
-	i2c_data(I2C_DATA_HIGH);
-	i2c_delay(CLOCK_LOW_TIME);
-
-	i2c_dir_in();
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_sendnack
-*#
-*# DESCRIPTION  : Sends NACK on received data
-*#
-*#--------------------------------------------------------------------------*/
-void
-i2c_sendnack(void)
-{
-	/*
-	 * enable output
-	 */
-	i2c_delay(CLOCK_LOW_TIME);
-	i2c_dir_out();
-	/*
-	 * set data high
-	 */
-	i2c_data(I2C_DATA_HIGH);
-	/*
-	 * generate clock pulse
-	 */
-	i2c_delay(CLOCK_HIGH_TIME/6);
-	i2c_clk(I2C_CLOCK_HIGH);
-	i2c_delay(CLOCK_HIGH_TIME);
-	i2c_clk(I2C_CLOCK_LOW);
-	i2c_delay(CLOCK_LOW_TIME);
-
-	i2c_dir_in();
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_write
-*#
-*# DESCRIPTION  : Writes a value to an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_write(unsigned char theSlave, void *data, size_t nbytes)
-{
-	int error, cntr = 3;
-	unsigned char bytes_wrote = 0;
-	unsigned char value;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i2c_lock, flags);
-
-	do {
-		error = 0;
-
-		i2c_start();
-		/*
-		 * send slave address
-		 */
-		i2c_outbyte((theSlave & 0xfe));
-		/*
-		 * wait for ack
-		 */
-		if (!i2c_getack())
-			error = 1;
-		/*
-		 * send data
-		 */
-		for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) {
-			memcpy(&value, data + bytes_wrote, sizeof value);
-			i2c_outbyte(value);
-			/*
-			 * now it's time to wait for ack
-			 */
-			if (!i2c_getack())
-				error |= 4;
-		}
-		/*
-		 * end byte stream
-		 */
-		i2c_stop();
-
-	} while (error && cntr--);
-
-	i2c_delay(CLOCK_LOW_TIME);
-
-	spin_unlock_irqrestore(&i2c_lock, flags);
-
-	return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_read
-*#
-*# DESCRIPTION  : Reads a value from an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_read(unsigned char theSlave, void *data, size_t nbytes)
-{
-	unsigned char b = 0;
-	unsigned char bytes_read = 0;
-	int error, cntr = 3;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i2c_lock, flags);
-
-	do {
-		error = 0;
-		memset(data, 0, nbytes);
-		/*
-		 * generate start condition
-		 */
-		i2c_start();
-		/*
-		 * send slave address
-		 */
-		i2c_outbyte((theSlave | 0x01));
-		/*
-		 * wait for ack
-		 */
-		if (!i2c_getack())
-			error = 1;
-		/*
-		 * fetch data
-		 */
-		for (bytes_read = 0; bytes_read < nbytes; bytes_read++) {
-			b = i2c_inbyte();
-			memcpy(data + bytes_read, &b, sizeof b);
-
-			if (bytes_read < (nbytes - 1))
-				i2c_sendack();
-		}
-		/*
-		 * last received byte needs to be nacked
-		 * instead of acked
-		 */
-		i2c_sendnack();
-		/*
-		 * end sequence
-		 */
-		i2c_stop();
-	} while (error && cntr--);
-
-	spin_unlock_irqrestore(&i2c_lock, flags);
-
-	return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_writereg
-*#
-*# DESCRIPTION  : Writes a value to an I2C device
-*#
-*#--------------------------------------------------------------------------*/
-int
-i2c_writereg(unsigned char theSlave, unsigned char theReg,
-	     unsigned char theValue)
-{
-	int error, cntr = 3;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i2c_lock, flags);
-
-	do {
-		error = 0;
-
-		i2c_start();
-		/*
-		 * send slave address
-		 */
-		i2c_outbyte((theSlave & 0xfe));
-		/*
-		 * wait for ack
-		 */
-		if(!i2c_getack())
-			error = 1;
-		/*
-		 * now select register
-		 */
-		i2c_dir_out();
-		i2c_outbyte(theReg);
-		/*
-		 * now it's time to wait for ack
-		 */
-		if(!i2c_getack())
-			error |= 2;
-		/*
-		 * send register register data
-		 */
-		i2c_outbyte(theValue);
-		/*
-		 * now it's time to wait for ack
-		 */
-		if(!i2c_getack())
-			error |= 4;
-		/*
-		 * end byte stream
-		 */
-		i2c_stop();
-	} while(error && cntr--);
-
-	i2c_delay(CLOCK_LOW_TIME);
-
-	spin_unlock_irqrestore(&i2c_lock, flags);
-
-	return -error;
-}
-
-/*#---------------------------------------------------------------------------
-*#
-*# FUNCTION NAME: i2c_readreg
-*#
-*# DESCRIPTION  : Reads a value from the decoder registers.
-*#
-*#--------------------------------------------------------------------------*/
-unsigned char
-i2c_readreg(unsigned char theSlave, unsigned char theReg)
-{
-	unsigned char b = 0;
-	int error, cntr = 3;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i2c_lock, flags);
-
-	do {
-		error = 0;
-		/*
-		 * generate start condition
-		 */
-		i2c_start();
-
-		/*
-		 * send slave address
-		 */
-		i2c_outbyte((theSlave & 0xfe));
-		/*
-		 * wait for ack
-		 */
-		if(!i2c_getack())
-			error = 1;
-		/*
-		 * now select register
-		 */
-		i2c_dir_out();
-		i2c_outbyte(theReg);
-		/*
-		 * now it's time to wait for ack
-		 */
-		if(!i2c_getack())
-			error |= 2;
-		/*
-		 * repeat start condition
-		 */
-		i2c_delay(CLOCK_LOW_TIME);
-		i2c_start();
-		/*
-		 * send slave address
-		 */
-		i2c_outbyte(theSlave | 0x01);
-		/*
-		 * wait for ack
-		 */
-		if(!i2c_getack())
-			error |= 4;
-		/*
-		 * fetch register
-		 */
-		b = i2c_inbyte();
-		/*
-		 * last received byte needs to be nacked
-		 * instead of acked
-		 */
-		i2c_sendnack();
-		/*
-		 * end sequence
-		 */
-		i2c_stop();
-
-	} while(error && cntr--);
-
-	spin_unlock_irqrestore(&i2c_lock, flags);
-
-	return b;
-}
-
-static int
-i2c_open(struct inode *inode, struct file *filp)
-{
-	return 0;
-}
-
-static int
-i2c_release(struct inode *inode, struct file *filp)
-{
-	return 0;
-}
-
-/* Main device API. ioctl's to write or read to/from i2c registers.
- */
-
-static long
-i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
-		return -ENOTTY;
-	}
-
-	switch (_IOC_NR(cmd)) {
-		case I2C_WRITEREG:
-			/* write to an i2c slave */
-			D(printk("i2cw %d %d %d\n",
-				 I2C_ARGSLAVE(arg),
-				 I2C_ARGREG(arg),
-				 I2C_ARGVALUE(arg)));
-
-			mutex_lock(&i2c_mutex);
-			ret = i2c_writereg(I2C_ARGSLAVE(arg),
-					    I2C_ARGREG(arg),
-					    I2C_ARGVALUE(arg));
-			mutex_unlock(&i2c_mutex);
-			return ret;
-
-		case I2C_READREG:
-		{
-			unsigned char val;
-			/* read from an i2c slave */
-			D(printk("i2cr %d %d ",
-				I2C_ARGSLAVE(arg),
-				I2C_ARGREG(arg)));
-			mutex_lock(&i2c_mutex);
-			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
-			mutex_unlock(&i2c_mutex);
-			D(printk("= %d\n", val));
-			return val;
-		}
-		default:
-			return -EINVAL;
-
-	}
-
-	return 0;
-}
-
-static const struct file_operations i2c_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl = i2c_ioctl,
-	.open		= i2c_open,
-	.release	= i2c_release,
-	.llseek		= noop_llseek,
-};
-
-static int __init i2c_init(void)
-{
-	static int res;
-	static int first = 1;
-
-	if (!first)
-		return res;
-
-	first = 0;
-
-	/* Setup and enable the DATA and CLK pins */
-
-	res = crisv32_io_get_name(&cris_i2c_data,
-		CONFIG_ETRAX_V32_I2C_DATA_PORT);
-	if (res < 0)
-		return res;
-
-	res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_V32_I2C_CLK_PORT);
-	crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out);
-
-	return res;
-}
-
-
-static int __init i2c_register(void)
-{
-	int res;
-
-	res = i2c_init();
-	if (res < 0)
-		return res;
-
-	/* register char device */
-
-	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
-	if (res < 0) {
-		printk(KERN_ERR "i2c: couldn't get a major number.\n");
-		return res;
-	}
-
-	printk(KERN_INFO
-		"I2C driver v2.2, (c) 1999-2007 Axis Communications AB\n");
-
-	return 0;
-}
-/* this makes sure that i2c_init is called during boot */
-module_init(i2c_register);
-
-/****************** END OF FILE i2c.c ********************************/
diff --git a/arch/cris/arch-v32/drivers/i2c.h b/arch/cris/arch-v32/drivers/i2c.h
deleted file mode 100644
index d9cc856f89fb..000000000000
--- a/arch/cris/arch-v32/drivers/i2c.h
+++ /dev/null
@@ -1,16 +0,0 @@
-
-#include <linux/init.h>
-
-/* High level I2C actions */
-int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
-int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
-unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-/* Low level I2C */
-void i2c_start(void);
-void i2c_stop(void);
-void i2c_outbyte(unsigned char x);
-unsigned char i2c_inbyte(void);
-int i2c_getack(void);
-void i2c_sendack(void);