diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2019-11-26 13:47:36 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2019-12-09 14:45:02 +0100 |
commit | 8668223a1ea74624e934cb49ccde77db6f39d660 (patch) | |
tree | 22aa4cf00946f3101d1f0a10889c1ffb711c044e | |
parent | f6a76d4256804b5bfbfcf585dc9477fdaae5a304 (diff) | |
download | linux-8668223a1ea74624e934cb49ccde77db6f39d660.tar.gz linux-8668223a1ea74624e934cb49ccde77db6f39d660.tar.bz2 linux-8668223a1ea74624e934cb49ccde77db6f39d660.zip |
ARM: dts: ux500: Split TVK DTSI files in two
The TVK1281618 was made in R1, R2 and R3 variants. The most
commonly used variants are R2 and R3 so split out these to
their own files.
The R3 version has a totally different display than R1 and
R2 and a different set of sensors.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191126124738.77690-2-linus.walleij@linaro.org
-rw-r--r-- | arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi | 79 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi | 58 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 71 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-hrefprev60-tvk.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-hrefv60plus-tvk.dts | 2 |
5 files changed, 141 insertions, 71 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi new file mode 100644 index 000000000000..e024520f4d47 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the TVK1281618 R2 UIB + */ + +#include "ste-href-tvk1281618.dtsi" + +/ { + soc { + i2c@80128000 { + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + drive-open-drain; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ + }; + lsm303dlh@1e { + /* Magnetometer */ + compatible = "st,lsm303dlh-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ + }; + lis331dl@1c { + /* Accelerometer */ + compatible = "st,lis331dl-accel"; + st,drdy-int-pin = <1>; + reg = <0x1c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + interrupt-parent = <&gpio2>; + /* INT2 would need to be open drain */ + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + }; + }; + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi new file mode 100644 index 000000000000..cb3677f0a1cb --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the TVK1281618 R2 UIB + */ + +#include "ste-href-tvk1281618.dtsi" + +/ { + soc { + i2c@80128000 { + /* Marked: + * 129 + * M35 + * L3GD20 + */ + l3gd20@6a { + /* Gyroscope */ + compatible = "st,l3gd20"; + status = "disabled"; + st,drdy-int-pin = <1>; + drive-open-drain; + reg = <0x6a>; // 0x6a or 0x6b + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + /* + * Marked: + * 2122 + * C3H + * DQEEE + * LIS3DH? + */ + lis3dh@18 { + /* Accelerometer */ + compatible = "st,lis3dh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + }; + }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 3bafd26b4824..e1dbfae22595 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -2,7 +2,7 @@ /* * Copyright 2012 ST-Ericsson AB * - * Device Tree for the TVK1281618 UIB + * Device Tree for the TVK1281618 family of UIBs */ #include <dt-bindings/interrupt-controller/irq.h> @@ -81,62 +81,8 @@ }; }; }; - /* Sensors mounted on this board variant */ + /* Sensors mounted on all board variants */ i2c@80128000 { - lsm303dlh@18 { - /* Accelerometer */ - compatible = "st,lsm303dlh-accel"; - st,drdy-int-pin = <1>; - drive-open-drain; - reg = <0x18>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; - */ - }; - lsm303dlh@1e { - /* Magnetometer */ - compatible = "st,lsm303dlh-magn"; - reg = <0x1e>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; - */ - }; - lis331dl@1c { - /* Accelerometer */ - compatible = "st,lis331dl-accel"; - st,drdy-int-pin = <1>; - reg = <0x1c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; - interrupt-parent = <&gpio2>; - /* INT2 would need to be open drain */ - interrupts = <18 IRQ_TYPE_EDGE_RISING>, - <19 IRQ_TYPE_EDGE_RISING>; - }; ak8974@f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; @@ -268,18 +214,5 @@ }; }; }; - - mcde@a0350000 { - status = "okay"; - - dsi@a0351000 { - panel { - compatible = "samsung,s6d16d0"; - reg = <0>; - vdd1-supply = <&ab8500_ldo_aux1_reg>; - reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; - }; - }; - }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 8b88c91dca6c..142f5475521f 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "ste-db8500.dtsi" #include "ste-hrefprev60.dtsi" -#include "ste-href-tvk1281618.dtsi" +#include "ste-href-tvk1281618-r2.dtsi" / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index b31e43d5ff89..5d4b8245f02c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -8,7 +8,7 @@ /dts-v1/; #include "ste-db8500.dtsi" #include "ste-hrefv60plus.dtsi" -#include "ste-href-tvk1281618.dtsi" +#include "ste-href-tvk1281618-r2.dtsi" / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; |