Merge branch 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)

 - conversion to use the i2c_8bit_addr_from_msg macro consistently

 - move includes to platform_data

 - core updates to allow the (still in review) I3C subsystem to connect

 - and the regular share of smaller driver updates

* 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
  i2c: qup: fix building without CONFIG_ACPI
  i2c: tegra: Remove suspend-resume
  i2c: imx-lpi2c: Switch to SPDX identifier
  i2c: mxs: Switch to SPDX identifier
  i2c: busses: make use of i2c_8bit_addr_from_msg
  i2c: algos: make use of i2c_8bit_addr_from_msg
  i2c: rcar: document R8A77980 bindings
  i2c: qup: Add command-line parameter to override SCL frequency
  i2c: qup: Correct duty cycle for FM and FM+
  i2c: qup: Add support for Fast Mode Plus
  i2c: qup: add probe path for Centriq ACPI devices
  i2c: robotfuzz-osif: drop pointless test
  i2c: robotfuzz-osif: remove pointless local variable
  i2c: rk3x: Don't print visible virtual mapping MMIO address
  i2c: opal: don't check number of messages in the driver
  i2c: ibm_iic: don't check number of messages in the driver
  i2c: imx: Switch to SPDX identifier
  i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
  i2c: mux: demux-pinctrl: use proper parent device for demux adapter
  i2c: mux: improve error message for failed symlink
  ...

94 files changed, 1683 insertions, 483 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
index 64e6e656c345..b745f3706120 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -24,7 +24,7 @@ Recommended properties :
 - clock-frequency : desired I2C bus clock frequency in Hz.
 - ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
 	registers. PFUNC registers allow to switch I2C pins to function as
-	GPIOs, so they can by toggled manually.
+	GPIOs, so they can be toggled manually.
 
 Example (enbw_cmc board):
 	i2c@1c22000 {
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
index 4a7811ecd954..7ce8fae55537 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt
@@ -15,6 +15,7 @@ Required properties:
 	"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
 	"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
 	"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
+	"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
 	"renesas,i2c-r8a77995" if the device is a part of a R8A77995 SoC.
 	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
 	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
index 89b3250f049b..66ae46d3bc2f 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
@@ -8,9 +8,7 @@ Required properties:
       (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
       (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
           inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used
-	   on EXYNOS5440 which does not need GPIO configuration.
-      (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
+      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
 	   a host to SATA PHY controller on an internal bus.
   - reg: physical base address of the controller and length of memory mapped
     region.
diff --git a/Documentation/i2c/busses/i2c-mlxcpld b/Documentation/i2c/busses/i2c-mlxcpld
index 4e46c440b38d..925904aa9b57 100644
--- a/Documentation/i2c/busses/i2c-mlxcpld
+++ b/Documentation/i2c/busses/i2c-mlxcpld
@@ -20,6 +20,10 @@ The next transaction types are supported:
  - Write Byte/Block.
 
 Registers:
+CPBLTY		0x0 - capability reg.
+			Bits [6:5] - transaction length. b01 - 72B is supported,
+			36B in other case.
+			Bit 7 - SMBus block read support.
 CTRL		0x1 - control reg.
 			Resets all the registers.
 HALF_CYC	0x4 - cycle reg.
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index 9e1dfe7553ad..4e713f4cdb2f 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -18,7 +18,7 @@ Usage
 i2c-ocores uses the platform bus, so you need to provide a struct
 platform_device with the base address and interrupt number. The
 dev.platform_data of the device should also point to a struct
-ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
+ocores_i2c_platform_data (see linux/platform_data/i2c-ocores.h) describing the
 distance between registers and the input clock speed.
 There is also a possibility to attach a list of i2c_board_info which
 the i2c-ocores driver will add to the bus upon creation.
diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio
index 7a8d7d261632..893ecdfe6e43 100644
--- a/Documentation/i2c/muxes/i2c-mux-gpio
+++ b/Documentation/i2c/muxes/i2c-mux-gpio
@@ -30,12 +30,12 @@ i2c-mux-gpio uses the platform bus, so you need to provide a struct
 platform_device with the platform_data pointing to a struct
 i2c_mux_gpio_platform_data with the I2C adapter number of the master
 bus, the number of bus segments to create and the GPIO pins used
-to control it. See include/linux/i2c-mux-gpio.h for details.
+to control it. See include/linux/platform_data/i2c-mux-gpio.h for details.
 
 E.G. something like this for a MUX providing 4 bus segments
 controlled through 3 GPIO pins:
 
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
 
 static const unsigned myboard_gpiomux_gpios[] = {
diff --git a/MAINTAINERS b/MAINTAINERS
index c13b9fb3be0b..cb468a535f32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5953,14 +5953,14 @@ GENERIC GPIO I2C DRIVER
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
-F:	include/linux/i2c-gpio.h
+F:	include/linux/platform_data/i2c-gpio.h
 
 GENERIC GPIO I2C MULTIPLEXER DRIVER
 M:	Peter Korsgaard <peter.korsgaard@barco.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
 F:	drivers/i2c/muxes/i2c-mux-gpio.c
-F:	include/linux/i2c-mux-gpio.h
+F:	include/linux/platform_data/i2c-mux-gpio.h
 F:	Documentation/i2c/muxes/i2c-mux-gpio
 
 GENERIC HDLC (WAN) DRIVERS
@@ -10392,7 +10392,7 @@ F:	arch/arm/mach-omap1/
 F:	arch/arm/plat-omap/
 F:	arch/arm/configs/omap1_defconfig
 F:	drivers/i2c/busses/i2c-omap.c
-F:	include/linux/i2c-omap.h
+F:	include/linux/platform_data/i2c-omap.h
 
 OMAP2+ SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
@@ -10424,7 +10424,7 @@ F:	drivers/regulator/tps65218-regulator.c
 F:	drivers/regulator/tps65910-regulator.c
 F:	drivers/regulator/twl-regulator.c
 F:	drivers/regulator/twl6030-regulator.c
-F:	include/linux/i2c-omap.h
+F:	include/linux/platform_data/i2c-omap.h
 
 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 937eb1d47e7b..ef835d82cdb9 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -19,7 +19,7 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/platform_data/pca953x.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 67d46690a56e..da8f3fc3180f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -31,7 +31,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/htcpld.h>
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index d83ff257eaa8..c6537d2c2859 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -27,7 +27,7 @@
 #define __ARCH_ARM_MACH_OMAP1_COMMON_H
 
 #include <linux/mtd/mtd.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/reboot.h>
 
 #include <asm/exception.h>
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5bdf3c4190f9..9250f263ac51 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -20,7 +20,7 @@
  */
 
 #include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <mach/mux.h>
 #include "soc.h"
 
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index dff3750e432f..129455e822e4 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -30,7 +30,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/mfd/twl.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/reboot.h>
 #include <linux/irqchip/irq-omap-intc.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index fe66cf247874..d684fac8f592 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -13,7 +13,7 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/omap-dma.h>
 
 #include "omap_hwmod.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 74eefd30518c..abef9f6f9bf5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -13,7 +13,7 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/omap-dma.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 53e1ac3724f2..c9483bc06228 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,7 +14,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 
 #include "omap_hwmod.h"
 #include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index d93f9ea4119e..23e6a41a18eb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -15,7 +15,7 @@
  * XXX these should be marked initdata for multi-OMAP kernels
  */
 
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/power/smartreflex.h>
 #include <linux/platform_data/hsmmc-omap.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 234ee0eec815..a95dbac57a81 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 
 #include <linux/omap-dma.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 887a30fa775b..115473d441cd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 
 #include <linux/omap-dma.h>
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index a27c2fed298c..e6c7061a8e73 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/hsmmc-omap.h>
 #include <linux/power/smartreflex.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 
 #include <linux/omap-dma.h>
 
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 0adb1bd6208e..4d475f6f4a77 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,7 +30,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/gpio/machine.h>
 
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 207dcc2e94e7..ab2f89266bbd 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -35,7 +35,7 @@
 #include <linux/sched.h>
 #include <linux/gpio.h>
 #include <linux/jiffies.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/serial_8250.h>
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index f45aed2519ba..406487e76a5c 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -37,7 +37,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index 4e79dbd54a33..fa75d75b5ba9 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -29,7 +29,7 @@
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/gpio/machine.h>
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index d7d232dea33e..3cba60ff7aab 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -17,7 +17,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/i2c-pca-platform.h>
+#include <linux/platform_data/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/sh_intc.h>
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 3df0efd69ae3..4a34f311e1ff 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -519,9 +519,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
 			}
 		}
 	} else {		/* normal 7bit address	*/
-		addr = msg->addr << 1;
-		if (flags & I2C_M_RD)
-			addr |= 1;
+		addr = i2c_8bit_addr_from_msg(msg);
 		if (flags & I2C_M_REV_DIR_ADDR)
 			addr ^= 1;
 		ret = try_address(i2c_adap, addr, retries);
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index e370804ec8bc..883a290f6a4d 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -112,11 +112,8 @@ static int pca_address(struct i2c_algo_pca_data *adap,
 		       struct i2c_msg *msg)
 {
 	int sta = pca_get_con(adap);
-	int addr;
+	int addr = i2c_8bit_addr_from_msg(msg);
 
-	addr = ((0x7f & msg->addr) << 1);
-	if (msg->flags & I2C_M_RD)
-		addr |= 1;
 	DEB2("=== SLAVE ADDRESS %#04x+%c=%#04x\n",
 	     msg->addr, msg->flags & I2C_M_RD ? 'R' : 'W', addr);
 
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 270d84bfc2c6..5c29a4d397cf 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -291,13 +291,9 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
 static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
 			 struct i2c_msg *msg)
 {
-	unsigned short flags = msg->flags;
-	unsigned char addr;
+	unsigned char addr = i2c_8bit_addr_from_msg(msg);
 
-	addr = msg->addr << 1;
-	if (flags & I2C_M_RD)
-		addr |= 1;
-	if (flags & I2C_M_REV_DIR_ADDR)
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
 		addr ^= 1;
 	i2c_outb(adap, addr);
 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index fce9f2ca0570..4f8df2ec87b1 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -943,6 +943,7 @@ config I2C_STM32F4
 config I2C_STM32F7
 	tristate "STMicroelectronics STM32F7 I2C support"
 	depends on ARCH_STM32 || COMPILE_TEST
+	select I2C_SLAVE
 	help
 	  Enable this option to add support for STM32 I2C controller embedded
 	  in STM32F7 SoCs.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 189e34ba050f..5a869144a0c5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -94,7 +94,8 @@ obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
 obj-$(CONFIG_I2C_SPRD)		+= i2c-sprd.o
 obj-$(CONFIG_I2C_ST)		+= i2c-st.o
 obj-$(CONFIG_I2C_STM32F4)	+= i2c-stm32f4.o
-obj-$(CONFIG_I2C_STM32F7)	+= i2c-stm32f7.o
+i2c-stm32f7-drv-objs := i2c-stm32f7.o i2c-stm32.o
+obj-$(CONFIG_I2C_STM32F7)	+= i2c-stm32f7-drv.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_SUN6I_P2WI)	+= i2c-sun6i-p2wi.o
 obj-$(CONFIG_I2C_SYNQUACER)	+= i2c-synquacer.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 7d4aeb4465b3..60e4d0e939a3 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -335,13 +335,12 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
 {
 	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
 	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
-	u8 slave_addr = msg->addr << 1;
+	u8 slave_addr = i2c_8bit_addr_from_msg(msg);
 
 	bus->master_state = ASPEED_I2C_MASTER_START;
 	bus->buf_index = 0;
 
 	if (msg->flags & I2C_M_RD) {
-		slave_addr |= 1;
 		command |= ASPEED_I2CD_M_RX_CMD;
 		/* Need to let the hardware know to NACK after RX. */
 		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index bfd1fdff64a9..3f3e8b3bf5ff 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -518,8 +518,16 @@ static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
 	 * the RXRDY interrupt first in order to not keep garbage data in the
 	 * Receive Holding Register for the next transfer.
 	 */
-	if (irqstatus & AT91_TWI_RXRDY)
-		at91_twi_read_next_byte(dev);
+	if (irqstatus & AT91_TWI_RXRDY) {
+		/*
+		 * Read all available bytes at once by polling RXRDY usable w/
+		 * and w/o FIFO. With FIFO enabled we could also read RXFL and
+		 * avoid polling RXRDY.
+		 */
+		do {
+			at91_twi_read_next_byte(dev);
+		} while (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY);
+	}
 
 	/*
 	 * When a NACK condition is detected, the I2C controller sets the NACK,
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index 13f07482ec68..8e60048a33f8 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -351,13 +351,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 		 *   addr_2: addr[7:0]
 		 */
 		addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
+		if (i2c_m_rd(msg))
+			addr_1 |= 1;	/* Set the R/nW bit of the address */
 		addr_2 = msg->addr & 0xFF;
 	} else {
 		/* 7-bit address
 		 *   addr_1: addr[6:0] | (R/nW)
 		 *   addr_2: dont care
 		 */
-		addr_1 = (msg->addr << 1) & 0xFF;
+		addr_1 = i2c_8bit_addr_from_msg(msg);
 		addr_2 = 0;
 	}
 
@@ -365,7 +367,6 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
 		/* I2C read transfer */
 		rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
 		tx_xfer = 0;
-		addr_1 |= 1;	/* Set the R/nW bit of the address */
 	} else {
 		/* I2C write transfer */
 		rx_xfer = 0;
@@ -532,23 +533,23 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	if (idev->bus_clk_rate == 0)
 		idev->bus_clk_rate = 100000;	/* default clock rate */
 
+	ret = clk_prepare_enable(idev->i2c_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return ret;
+	}
+
 	ret = axxia_i2c_init(idev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize\n");
-		return ret;
+		goto error_disable_clk;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
 			       pdev->name, idev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(idev->i2c_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		return ret;
+		goto error_disable_clk;
 	}
 
 	i2c_set_adapdata(&idev->adapter, idev);
@@ -563,12 +564,14 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, idev);
 
 	ret = i2c_add_adapter(&idev->adapter);
-	if (ret) {
-		clk_disable_unprepare(idev->i2c_clk);
-		return ret;
-	}
+	if (ret)
+		goto error_disable_clk;
 
 	return 0;
+
+error_disable_clk:
+	clk_disable_unprepare(idev->i2c_clk);
+	return ret;
 }
 
 static int axxia_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 27ebd90de43b..48914dfc8ce8 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -149,18 +149,17 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
 }
 
-void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
-{
-	dw_writel(dev, enable, DW_IC_ENABLE);
-}
-
-void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+void __i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	int timeout = 100;
 
 	do {
-		__i2c_dw_enable(dev, enable);
-		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+		__i2c_dw_disable_nowait(dev);
+		/*
+		 * The enable status register may be unimplemented, but
+		 * in that case this test reads zero and exits the loop.
+		 */
+		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == 0)
 			return;
 
 		/*
@@ -171,8 +170,7 @@ void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
 		usleep_range(25, 250);
 	} while (timeout--);
 
-	dev_warn(dev->dev, "timeout in %sabling adapter\n",
-		 enable ? "en" : "dis");
+	dev_warn(dev->dev, "timeout in disabling adapter\n");
 }
 
 unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
@@ -277,7 +275,7 @@ u32 i2c_dw_func(struct i2c_adapter *adap)
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	/* Disable controller */
-	__i2c_dw_enable_and_wait(dev, false);
+	__i2c_dw_disable(dev);
 
 	/* Disable all interupts */
 	dw_writel(dev, 0, DW_IC_INTR_MASK);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 8707c76b2fee..d690e648bc01 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -297,8 +297,6 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset);
 void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
-void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
-void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
 unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
 int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
 int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
@@ -309,6 +307,18 @@ u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 
+static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 1, DW_IC_ENABLE);
+}
+
+static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 0, DW_IC_ENABLE);
+}
+
+void __i2c_dw_disable(struct dw_i2c_dev *dev);
+
 extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 0cdba29ae0a9..27436a937492 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -81,7 +81,7 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
 	/* Disable the adapter */
-	__i2c_dw_enable_and_wait(dev, false);
+	__i2c_dw_disable(dev);
 
 	/* Set standard and fast speed deviders for high/low periods */
 
@@ -180,7 +180,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	u32 ic_con, ic_tar = 0;
 
 	/* Disable the adapter */
-	__i2c_dw_enable_and_wait(dev, false);
+	__i2c_dw_disable(dev);
 
 	/* If the slave address is ten bit address, enable 10BITADDR */
 	ic_con = dw_readl(dev, DW_IC_CON);
@@ -209,7 +209,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	i2c_dw_disable_int(dev);
 
 	/* Enable the adapter */
-	__i2c_dw_enable(dev, true);
+	__i2c_dw_enable(dev);
 
 	/* Dummy read to avoid the register getting stuck on Bay Trail */
 	dw_readl(dev, DW_IC_ENABLE_STATUS);
@@ -462,7 +462,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	 * additional interrupts are a hardware bug or this driver doesn't
 	 * handle them correctly yet.
 	 */
-	__i2c_dw_enable(dev, false);
+	__i2c_dw_disable_nowait(dev);
 
 	if (dev->msg_err) {
 		ret = dev->msg_err;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index d42558d1b002..8ce2cd368477 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -75,7 +75,7 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
 	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
 	/* Disable the adapter. */
-	__i2c_dw_enable_and_wait(dev, false);
+	__i2c_dw_disable(dev);
 
 	/* Configure SDA Hold Time if required. */
 	reg = dw_readl(dev, DW_IC_COMP_VERSION);
@@ -119,11 +119,11 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
 	 * Set slave address in the IC_SAR register,
 	 * the address to which the DW_apb_i2c responds.
 	 */
-	__i2c_dw_enable(dev, false);
+	__i2c_dw_disable_nowait(dev);
 	dw_writel(dev, slave->addr, DW_IC_SAR);
 	dev->slave = slave;
 
-	__i2c_dw_enable(dev, true);
+	__i2c_dw_enable(dev);
 
 	dev->cmd_err = 0;
 	dev->msg_write_idx = 0;
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index f718ee4e3332..3f28317cde39 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -360,11 +360,11 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 			if (ret < 0)
 				goto abort;
 		}
+		ret = diolan_i2c_put_byte_ack(dev,
+					      i2c_8bit_addr_from_msg(pmsg));
+		if (ret < 0)
+			goto abort;
 		if (pmsg->flags & I2C_M_RD) {
-			ret =
-			    diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1);
-			if (ret < 0)
-				goto abort;
 			for (j = 0; j < pmsg->len; j++) {
 				u8 byte;
 				bool ack = j < pmsg->len - 1;
@@ -393,9 +393,6 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 				pmsg->buf[j] = byte;
 			}
 		} else {
-			ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1);
-			if (ret < 0)
-				goto abort;
 			for (j = 0; j < pmsg->len; j++) {
 				ret = diolan_i2c_put_byte_ack(dev,
 							      pmsg->buf[j]);
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index aa336ba89aa3..5f2bab878b2c 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -144,8 +144,7 @@ static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
 	struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
 
 	efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
-	efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
-			(cur_msg->flags & I2C_M_RD ? 1 : 0));
+	efm32_i2c_write32(ddata, REG_TXDATA, i2c_8bit_addr_from_msg(cur_msg));
 }
 
 static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index bdeab0174fec..835d54ac2971 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -414,7 +414,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
 		iowrite32(addr_8_lsb, p + PCH_I2CDR);
 	} else {
 		/* set 7 bit slave address and R/W bit as 0 */
-		iowrite32(addr << 1, p + PCH_I2CDR);
+		iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR);
 		if (first)
 			pch_i2c_start(adap);
 	}
@@ -538,8 +538,7 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
 		iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
 	} else {
 		/* 7 address bits + R/W bit */
-		addr = (((addr) << 1) | (I2C_RD));
-		iowrite32(addr, p + PCH_I2CDR);
+		iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR);
 	}
 
 	/* check if it is the first message */
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index d2e84480fbe9..ba9b6ea48a31 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -149,7 +149,7 @@ static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 	em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
 
 	/* Send slave address and R/W type */
-	writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0);
+	writeb(i2c_8bit_addr_from_msg(msg), priv->base + I2C_OFS_IIC0);
 
 	/* Wait for transaction */
 	status = em_i2c_wait_for_event(priv);
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 12ec8484e653..de82ad8ff534 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -707,7 +707,7 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 			struct i2c_msg *msgs, int num)
 {
 	struct exynos5_i2c *i2c = adap->algo_data;
-	int i = 0, ret = 0, stop = 0;
+	int i, ret;
 
 	if (i2c->suspended) {
 		dev_err(i2c->dev, "HS-I2C is not initialized.\n");
@@ -718,30 +718,15 @@ static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 	if (ret)
 		return ret;
 
-	for (i = 0; i < num; i++, msgs++) {
-		stop = (i == num - 1);
-
-		ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
-
-		if (ret < 0)
-			goto out;
-	}
-
-	if (i == num) {
-		ret = num;
-	} else {
-		/* Only one message, cannot access the device */
-		if (i == 1)
-			ret = -EREMOTEIO;
-		else
-			ret = i;
-
-		dev_warn(i2c->dev, "xfer message failed\n");
+	for (i = 0; i < num; ++i) {
+		ret = exynos5_i2c_xfer_msg(i2c, msgs + i, i + 1 == num);
+		if (ret)
+			break;
 	}
 
- out:
 	clk_disable(i2c->clk);
-	return ret;
+
+	return ret ?: num;
 }
 
 static u32 exynos5_i2c_func(struct i2c_adapter *adap)
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 58abb3eced58..005e6e0330c2 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -11,7 +11,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index bb68957d3da5..061a4bfb03f4 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -73,7 +73,6 @@
 #define I2C_OVER_INTR		BIT(0)
 
 #define HIX5I2C_MAX_FREQ	400000		/* 400k */
-#define HIX5I2C_READ_OPERATION	0x01
 
 enum hix5hd2_i2c_state {
 	HIX5I2C_STAT_RW_ERR = -1,
@@ -311,12 +310,8 @@ static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
 	hix5hd2_i2c_clr_all_irq(priv);
 	hix5hd2_i2c_enable_irq(priv);
 
-	if (priv->msg->flags & I2C_M_RD)
-		writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
-			       priv->regs + HIX5I2C_TXR);
-	else
-		writel_relaxed(priv->msg->addr << 1,
-			       priv->regs + HIX5I2C_TXR);
+	writel_relaxed(i2c_8bit_addr_from_msg(priv->msg),
+		       priv->regs + HIX5I2C_TXR);
 
 	writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -377,17 +372,7 @@ static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
 			goto out;
 	}
 
-	if (i == num) {
-		ret = num;
-	} else {
-		/* Only one message, cannot access the device */
-		if (i == 1)
-			ret = -EREMOTEIO;
-		else
-			ret = i;
-
-		dev_warn(priv->dev, "xfer message failed\n");
-	}
+	ret = num;
 
 out:
 	pm_runtime_mark_last_busy(priv->dev);
@@ -471,7 +456,6 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	pm_suspend_ignore_children(&pdev->dev, true);
 	pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
 	pm_runtime_use_autosuspend(priv->dev);
 	pm_runtime_set_active(priv->dev);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e0d59e9ff3c6..aa726607645e 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -106,7 +106,7 @@
 
 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
 #include <linux/gpio.h>
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
 #endif
 
 /* I801 SMBus address offsets */
@@ -1710,7 +1710,7 @@ static void i801_shutdown(struct pci_dev *dev)
 	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int i801_suspend(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -1731,8 +1731,7 @@ static int i801_resume(struct device *dev)
 }
 #endif
 
-static UNIVERSAL_DEV_PM_OPS(i801_pm_ops, i801_suspend,
-			    i801_resume, NULL);
+static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
 
 static struct pci_driver i801_driver = {
 	.name		= "i801_smbus",
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 961c5f42d956..6f6e1dfe7cce 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -561,9 +561,6 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
 	DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num);
 
-	if (!num)
-		return 0;
-
 	/* Check the sanity of the passed messages.
 	 * Uhh, generic i2c layer is more suitable place for such code...
 	 */
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index e6da2c7a9a3e..6d975f5221ca 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -1,18 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * This is i.MX low power i2c controller driver.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/clk.h>
@@ -180,15 +170,13 @@ static int lpi2c_imx_start(struct lpi2c_imx_struct *lpi2c_imx,
 			   struct i2c_msg *msgs)
 {
 	unsigned int temp;
-	u8 read;
 
 	temp = readl(lpi2c_imx->base + LPI2C_MCR);
 	temp |= MCR_RRF | MCR_RTF;
 	writel(temp, lpi2c_imx->base + LPI2C_MCR);
 	writel(0x7f00, lpi2c_imx->base + LPI2C_MSR);
 
-	read = msgs->flags & I2C_M_RD;
-	temp = (msgs->addr << 1 | read) | (GEN_START << 8);
+	temp = i2c_8bit_addr_from_msg(msgs) | (GEN_START << 8);
 	writel(temp, lpi2c_imx->base + LPI2C_MTDR);
 
 	return lpi2c_imx_bus_busy(lpi2c_imx);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d7267dd9c7bf..0207e194f84b 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	Copyright (C) 2002 Motorola GSG-China
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version 2
- *	of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
  * Author:
  *	Darius Augulis, Teltonika Inc.
  *
@@ -630,7 +621,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx,
 	 * Write slave address.
 	 * The first byte must be transmitted by the CPU.
 	 */
-	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
 	reinit_completion(&i2c_imx->dma->cmd_complete);
 	time_left = wait_for_completion_timeout(
 				&i2c_imx->dma->cmd_complete,
@@ -760,10 +751,10 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 	int i, result;
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n",
-		__func__, msgs->addr << 1);
+		__func__, i2c_8bit_addr_from_msg(msgs));
 
 	/* write slave address */
-	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
+	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
 	result = i2c_imx_trx_complete(i2c_imx);
 	if (result)
 		return result;
@@ -796,10 +787,10 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
 
 	dev_dbg(&i2c_imx->adapter.dev,
 		"<%s> write slave address: addr=0x%x\n",
-		__func__, (msgs->addr << 1) | 0x01);
+		__func__, i2c_8bit_addr_from_msg(msgs));
 
 	/* write slave address */
-	imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
+	imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR);
 	result = i2c_imx_trx_complete(i2c_imx);
 	if (result)
 		return result;
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
index e879190b5d1d..1c874aaa0447 100644
--- a/drivers/i2c/busses/i2c-kempld.c
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -124,15 +124,14 @@ static int kempld_i2c_process(struct kempld_i2c_data *i2c)
 		/* 10 bit address? */
 		if (i2c->msg->flags & I2C_M_TEN) {
 			addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+			/* Set read bit if necessary */
+			addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
 			i2c->state = STATE_ADDR10;
 		} else {
-			addr = (i2c->msg->addr << 1);
+			addr = i2c_8bit_addr_from_msg(i2c->msg);
 			i2c->state = STATE_START;
 		}
 
-		/* Set read bit if necessary */
-		addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
-
 		kempld_write8(pld, KEMPLD_I2C_DATA, addr);
 		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
 
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 4c28fa28ce76..745ed43a22d6 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -45,13 +45,16 @@
 #define MLXCPLD_I2C_VALID_FLAG		(I2C_M_RECV_LEN | I2C_M_RD)
 #define MLXCPLD_I2C_BUS_NUM		1
 #define MLXCPLD_I2C_DATA_REG_SZ		36
+#define MLXCPLD_I2C_DATA_SZ_BIT		BIT(5)
+#define MLXCPLD_I2C_DATA_SZ_MASK	GENMASK(6, 5)
+#define MLXCPLD_I2C_SMBUS_BLK_BIT	BIT(7)
 #define MLXCPLD_I2C_MAX_ADDR_LEN	4
 #define MLXCPLD_I2C_RETR_NUM		2
 #define MLXCPLD_I2C_XFER_TO		500000 /* usec */
 #define MLXCPLD_I2C_POLL_TIME		2000   /* usec */
 
 /* LPC I2C registers */
-#define MLXCPLD_LPCI2C_LPF_REG		0x0
+#define MLXCPLD_LPCI2C_CPBLTY_REG	0x0
 #define MLXCPLD_LPCI2C_CTRL_REG		0x1
 #define MLXCPLD_LPCI2C_HALF_CYC_REG	0x4
 #define MLXCPLD_LPCI2C_I2C_HOLD_REG	0x5
@@ -83,6 +86,7 @@ struct mlxcpld_i2c_priv {
 	struct mutex lock;
 	struct  mlxcpld_i2c_curr_xfer xfer;
 	struct device *dev;
+	bool smbus_block;
 };
 
 static void mlxcpld_i2c_lpc_write_buf(u8 *data, u8 len, u32 addr)
@@ -230,7 +234,7 @@ static void mlxcpld_i2c_set_transf_data(struct mlxcpld_i2c_priv *priv,
 	 * All upper layers currently are never use transfer with more than
 	 * 2 messages. Actually, it's also not so relevant in Mellanox systems
 	 * because of HW limitation. Max size of transfer is not more than 32
-	 * bytes in the current x86 LPCI2C bridge.
+	 * or 68 bytes in the current x86 LPCI2C bridge.
 	 */
 	priv->xfer.cmd = msgs[num - 1].flags & I2C_M_RD;
 
@@ -295,7 +299,7 @@ static int mlxcpld_i2c_wait_for_free(struct mlxcpld_i2c_priv *priv)
 static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
 {
 	int status, i, timeout = 0;
-	u8 datalen;
+	u8 datalen, val;
 
 	do {
 		usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
@@ -324,9 +328,22 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
 		 * Actual read data len will be always the same as
 		 * requested len. 0xff (line pull-up) will be returned
 		 * if slave has no data to return. Thus don't read
-		 * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD.
+		 * MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD.  Only in case of
+		 * SMBus block read transaction data len can be different,
+		 * check this case.
 		 */
-		datalen = priv->xfer.data_len;
+		mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG, &val,
+				      1);
+		if (priv->smbus_block && (val & MLXCPLD_I2C_SMBUS_BLK_BIT)) {
+			mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
+					      &datalen, 1);
+			if (unlikely(datalen > (I2C_SMBUS_BLOCK_MAX + 1))) {
+				dev_err(priv->dev, "Incorrect smbus block read message len\n");
+				return -E2BIG;
+			}
+		} else {
+			datalen = priv->xfer.data_len;
+		}
 
 		mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_DATA_REG,
 				      priv->xfer.msg[i].buf, datalen);
@@ -344,12 +361,20 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
 static void mlxcpld_i2c_xfer_msg(struct mlxcpld_i2c_priv *priv)
 {
 	int i, len = 0;
-	u8 cmd;
+	u8 cmd, val;
 
 	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
 			       &priv->xfer.data_len, 1);
-	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG,
-			       &priv->xfer.addr_width, 1);
+
+	val = priv->xfer.addr_width;
+	/* Notify HW about SMBus block read transaction */
+	if (priv->smbus_block && priv->xfer.msg_num >= 2 &&
+	    priv->xfer.msg[1].len == 1 &&
+	    (priv->xfer.msg[1].flags & I2C_M_RECV_LEN) &&
+	    (priv->xfer.msg[1].flags & I2C_M_RD))
+		val |= MLXCPLD_I2C_SMBUS_BLK_BIT;
+
+	mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG, &val, 1);
 
 	for (i = 0; i < priv->xfer.msg_num; i++) {
 		if ((priv->xfer.msg[i].flags & I2C_M_RD) != I2C_M_RD) {
@@ -425,7 +450,14 @@ static int mlxcpld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 
 static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+	struct mlxcpld_i2c_priv *priv = i2c_get_adapdata(adap);
+
+	if (priv->smbus_block)
+		return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+			I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_BLOCK_DATA;
+	else
+		return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+			I2C_FUNC_SMBUS_I2C_BLOCK;
 }
 
 static const struct i2c_algorithm mlxcpld_i2c_algo = {
@@ -440,6 +472,13 @@ static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
 	.max_comb_1st_msg_len = 4,
 };
 
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks_ext = {
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+	.max_read_len = MLXCPLD_I2C_DATA_REG_SZ * 2 - MLXCPLD_I2C_MAX_ADDR_LEN,
+	.max_write_len = MLXCPLD_I2C_DATA_REG_SZ * 2,
+	.max_comb_1st_msg_len = 4,
+};
+
 static struct i2c_adapter mlxcpld_i2c_adapter = {
 	.owner          = THIS_MODULE,
 	.name           = "i2c-mlxcpld",
@@ -454,6 +493,7 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
 {
 	struct mlxcpld_i2c_priv *priv;
 	int err;
+	u8 val;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -466,6 +506,16 @@ static int mlxcpld_i2c_probe(struct platform_device *pdev)
 
 	/* Register with i2c layer */
 	mlxcpld_i2c_adapter.timeout = usecs_to_jiffies(MLXCPLD_I2C_XFER_TO);
+	/* Read capability register */
+	mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_CPBLTY_REG, &val, 1);
+	/* Check support for extended transaction length */
+	if ((val & MLXCPLD_I2C_DATA_SZ_MASK) == MLXCPLD_I2C_DATA_SZ_BIT)
+		mlxcpld_i2c_adapter.quirks = &mlxcpld_i2c_quirks_ext;
+	/* Check support for smbus block transaction */
+	if (val & MLXCPLD_I2C_SMBUS_BLK_BIT)
+		priv->smbus_block = true;
+	if (pdev->id >= -1)
+		mlxcpld_i2c_adapter.nr = pdev->id;
 	priv->adap = mlxcpld_i2c_adapter;
 	priv->adap.dev.parent = &pdev->dev;
 	priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index cf23a746cc17..1e57f58fcb00 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -27,6 +27,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/scatterlist.h>
@@ -734,7 +735,6 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
 
 static int mtk_i2c_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *of_id;
 	int ret = 0;
 	struct mtk_i2c *i2c;
 	struct clk *clk;
@@ -761,11 +761,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	init_completion(&i2c->msg_complete);
 
-	of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node);
-	if (!of_id)
-		return -EINVAL;
-
-	i2c->dev_comp = of_id->data;
+	i2c->dev_comp = of_device_get_match_data(&pdev->dev);
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 	i2c->dev = &pdev->dev;
 	i2c->adap.dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index e617bd600794..642c58946d8d 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale MXS I2C bus driver
  *
@@ -7,12 +8,6 @@
  * based on a (non-working) driver which was:
  *
  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  */
 
 #include <linux/slab.h>
@@ -180,9 +175,10 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 	struct dma_async_tx_descriptor *desc;
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 
+	i2c->addr_data = i2c_8bit_addr_from_msg(msg);
+
 	if (msg->flags & I2C_M_RD) {
 		i2c->dma_read = true;
-		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ;
 
 		/*
 		 * SELECT command.
@@ -240,7 +236,6 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap,
 		}
 	} else {
 		i2c->dma_read = false;
-		i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE;
 
 		/*
 		 * WRITE command.
@@ -371,7 +366,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 			struct i2c_msg *msg, uint32_t flags)
 {
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
-	uint32_t addr_data = msg->addr << 1;
+	uint32_t addr_data = i2c_8bit_addr_from_msg(msg);
 	uint32_t data = 0;
 	int i, ret, xlen = 0, xmit = 0;
 	uint32_t start;
@@ -411,8 +406,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 		 */
 		BUG_ON(msg->len > 4);
 
-		addr_data |= I2C_SMBUS_READ;
-
 		/* SELECT command. */
 		mxs_i2c_pio_trigger_write_cmd(i2c, MXS_CMD_I2C_SELECT,
 					      addr_data);
@@ -450,7 +443,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 		 * fast enough. It is possible to transfer arbitrary amount
 		 * of data using PIO write.
 		 */
-		addr_data |= I2C_SMBUS_WRITE;
 
 		/*
 		 * The LSB of data buffer is the first byte blasted across
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 49c7c0c91486..0ed5a41804dc 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1012,8 +1012,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		goto err_no_mem;
 	}
 
-	pm_suspend_ignore_children(&adev->dev, true);
-
 	dev->clk = devm_clk_get(&adev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		dev_err(&adev->dev, "could not get i2c clock\n");
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 45ae3c025bf6..88444ef74943 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -21,7 +21,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
-#include <linux/i2c-ocores.h>
+#include <linux/platform_data/i2c-ocores.h>
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/log2.h>
@@ -222,10 +222,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	i2c->nmsgs = num;
 	i2c->state = STATE_START;
 
-	oc_setreg(i2c, OCI2C_DATA,
-			(i2c->msg->addr << 1) |
-			((i2c->msg->flags & I2C_M_RD) ? 1:0));
-
+	oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg));
 	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
 
 	if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b9172f08fd05..65d06a819307 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -36,7 +36,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
-#include <linux/i2c-omap.h>
+#include <linux/platform_data/i2c-omap.h>
 #include <linux/pm_runtime.h>
 #include <linux/pinctrl/consumer.h>
 
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 0aabb7eca0c5..dc2a23f4fb52 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -94,8 +94,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	 */
 	memset(&req, 0, sizeof(req));
 	switch(num) {
-	case 0:
-		return 0;
 	case 1:
 		req.type = (msgs[0].flags & I2C_M_RD) ?
 			OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE;
@@ -114,8 +112,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 		req.size = cpu_to_be32(msgs[1].len);
 		req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf));
 		break;
-	default:
-		return -EOPNOTSUPP;
 	}
 
 	rc = i2c_opal_send_request(opal_id, &req);
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index df1dbc92a024..55fd5c6f3cca 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -121,7 +121,7 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
 
 	read = msg->flags & I2C_M_RD ? 1 : 0;
 
-	TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read);
+	TXFIFO_WR(smbus, MTXFIFO_START | i2c_8bit_addr_from_msg(msg));
 
 	if (read) {
 		TXFIFO_WR(smbus, msg->len | MTXFIFO_READ |
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index bc2707ffd409..de3fe6e828cb 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -20,7 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-algo-pca.h>
-#include <linux/i2c-pca-platform.h>
+#include <linux/platform_data/i2c-pca-platform.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index a542041df0cd..6e0e546ef83f 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -18,7 +18,6 @@
 #include <linux/timer.h>
 #include <linux/completion.h>
 #include <linux/platform_device.h>
-#include <linux/i2c-pnx.h>
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -29,6 +28,26 @@
 #define I2C_PNX_SPEED_KHZ_DEFAULT	100
 #define I2C_PNX_REGION_SIZE		0x100
 
+struct i2c_pnx_mif {
+	int			ret;		/* Return value */
+	int			mode;		/* Interface mode */
+	struct completion	complete;	/* I/O completion */
+	struct timer_list	timer;		/* Timeout */
+	u8 *			buf;		/* Data buffer */
+	int			len;		/* Length of data buffer */
+	int			order;		/* RX Bytes to order via TX */
+};
+
+struct i2c_pnx_algo_data {
+	void __iomem		*ioaddr;
+	struct i2c_pnx_mif	mif;
+	int			last;
+	struct clk		*clk;
+	struct i2c_adapter	adapter;
+	int			irq;
+	u32			timeout;
+};
+
 enum {
 	mstatus_tdi = 0x00000001,
 	mstatus_afi = 0x00000002,
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index ebbf9cdec86b..c86c3ae1318f 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -136,8 +136,13 @@
  */
 #define TOUT_MIN			2
 
+/* I2C Frequency Modes */
+#define I2C_STANDARD_FREQ		100000
+#define I2C_FAST_MODE_FREQ		400000
+#define I2C_FAST_MODE_PLUS_FREQ		1000000
+
 /* Default values. Use these if FW query fails */
-#define DEFAULT_CLK_FREQ 100000
+#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ
 #define DEFAULT_SRC_CLK 20000000
 
 /*
@@ -150,6 +155,10 @@
 /* TAG length for DATA READ in RX FIFO  */
 #define READ_RX_TAGS_LEN		2
 
+static unsigned int scl_freq;
+module_param_named(scl_freq, scl_freq, uint, 0444);
+MODULE_PARM_DESC(scl_freq, "SCL frequency override");
+
 /*
  * count: no of blocks
  * pos: current block number
@@ -453,7 +462,7 @@ static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup)
 {
 	struct qup_i2c_block *blk = &qup->blk;
 	struct i2c_msg *msg = qup->msg;
-	u32 addr = msg->addr << 1;
+	u32 addr = i2c_8bit_addr_from_msg(msg);
 	u32 qup_tag;
 	int idx;
 	u32 val;
@@ -1648,6 +1657,12 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
 	clk_disable_unprepare(qup->pclk);
 }
 
+static const struct acpi_device_id qup_i2c_acpi_match[] = {
+	{ "QCOM8010"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
+
 static int qup_i2c_probe(struct platform_device *pdev)
 {
 	static const int blk_sizes[] = {4, 16, 32};
@@ -1669,10 +1684,15 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	init_completion(&qup->xfer);
 	platform_set_drvdata(pdev, qup);
 
-	ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
-	if (ret) {
-		dev_notice(qup->dev, "using default clock-frequency %d",
-			DEFAULT_CLK_FREQ);
+	if (scl_freq) {
+		dev_notice(qup->dev, "Using override frequency of %u\n", scl_freq);
+		clk_freq = scl_freq;
+	} else {
+		ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
+		if (ret) {
+			dev_notice(qup->dev, "using default clock-frequency %d",
+				DEFAULT_CLK_FREQ);
+		}
 	}
 
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
@@ -1682,7 +1702,10 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	} else {
 		qup->adap.algo = &qup_i2c_algo_v2;
 		is_qup_v1 = false;
-		ret = qup_i2c_req_dma(qup);
+		if (acpi_match_device(qup_i2c_acpi_match, qup->dev))
+			goto nodma;
+		else
+			ret = qup_i2c_req_dma(qup);
 
 		if (ret == -EPROBE_DEFER)
 			goto fail_dma;
@@ -1734,8 +1757,8 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	}
 
 nodma:
-	/* We support frequencies up to FAST Mode (400KHz) */
-	if (!clk_freq || clk_freq > 400000) {
+	/* We support frequencies up to FAST Mode Plus (1MHz) */
+	if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) {
 		dev_err(qup->dev, "clock frequency not supported %d\n",
 			clk_freq);
 		return -EINVAL;
@@ -1839,9 +1862,15 @@ nodma:
 	size = QUP_INPUT_FIFO_SIZE(io_mode);
 	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
 
-	fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
 	hs_div = 3;
-	qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+	if (clk_freq <= I2C_STANDARD_FREQ) {
+		fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
+		qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+	} else {
+		/* 33%/66% duty cycle */
+		fs_div = ((src_clk_freq / clk_freq) - 6) * 2 / 3;
+		qup->clk_ctl = ((fs_div / 2) << 16) | (hs_div << 8) | (fs_div & 0xff);
+	}
 
 	/*
 	 * Time it takes for a byte to be clocked out on the bus.
@@ -1959,14 +1988,6 @@ static const struct of_device_id qup_i2c_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
 
-#if IS_ENABLED(CONFIG_ACPI)
-static const struct acpi_device_id qup_i2c_acpi_match[] = {
-	{ "QCOM8010"},
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
-#endif
-
 static struct platform_driver qup_i2c_driver = {
 	.probe  = qup_i2c_probe,
 	.remove = qup_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index c6915b835396..5e310efd9446 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -329,7 +329,7 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
 	if (priv->msgs_left == 1)
 		priv->flags |= ID_LAST_MSG;
 
-	rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
+	rcar_i2c_write(priv, ICMAR, i2c_8bit_addr_from_msg(priv->msg));
 	/*
 	 * We don't have a test case but the HW engineers say that the write order
 	 * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
@@ -542,6 +542,8 @@ static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
 	 * If next received data is the _LAST_, go to STOP phase. Might be
 	 * overwritten by REP START when setting up a new msg. Not elegant
 	 * but the only stable sequence for REP START I have found so far.
+	 * If you want to change this code, make sure sending one transfer with
+	 * four messages (WR-RD-WR-RD) works!
 	 */
 	if (priv->pos + 1 >= msg->len)
 		rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 95c2f1ce3cad..5f1fca7880b1 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -167,15 +167,14 @@ static irqreturn_t riic_tdre_isr(int irq, void *data)
 		return IRQ_NONE;
 
 	if (riic->bytes_left == RIIC_INIT_MSG) {
-		val = !!(riic->msg->flags & I2C_M_RD);
-		if (val)
+		if (riic->msg->flags & I2C_M_RD)
 			/* On read, switch over to receive interrupt */
 			riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER);
 		else
 			/* On write, initialize length */
 			riic->bytes_left = riic->msg->len;
 
-		val |= (riic->msg->addr << 1);
+		val = i2c_8bit_addr_from_msg(riic->msg);
 	} else {
 		val = *riic->buf;
 		riic->buf++;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index e1a18d989f83..b8a2728dd4b6 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1326,8 +1326,6 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_clk_notifier;
 
-	dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);
-
 	return 0;
 
 err_clk_notifier:
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index 9c0f52b7ff7e..d848cf515234 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -62,27 +62,24 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 {
 	struct osif_priv *priv = adapter->algo_data;
 	struct i2c_msg *pmsg;
-	int ret = 0;
-	int i, cmd;
+	int ret;
+	int i;
 
-	for (i = 0; ret >= 0 && i < num; i++) {
+	for (i = 0; i < num; i++) {
 		pmsg = &msgs[i];
 
 		if (pmsg->flags & I2C_M_RD) {
-			cmd = OSIFI2C_READ;
-
-			ret = osif_usb_read(adapter, cmd, pmsg->flags,
-					    pmsg->addr, pmsg->buf,
-					    pmsg->len);
+			ret = osif_usb_read(adapter, OSIFI2C_READ,
+					    pmsg->flags, pmsg->addr,
+					    pmsg->buf, pmsg->len);
 			if (ret != pmsg->len) {
 				dev_err(&adapter->dev, "failure reading data\n");
 				return -EREMOTEIO;
 			}
 		} else {
-			cmd = OSIFI2C_WRITE;
-
-			ret = osif_usb_write(adapter, cmd, pmsg->flags,
-					     pmsg->addr, pmsg->buf, pmsg->len);
+			ret = osif_usb_write(adapter, OSIFI2C_WRITE,
+					     pmsg->flags, pmsg->addr,
+					     pmsg->buf, pmsg->len);
 			if (ret != pmsg->len) {
 				dev_err(&adapter->dev, "failure writing data\n");
 				return -EREMOTEIO;
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510ee48b..9fe2b6951895 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -154,8 +154,6 @@ static const struct of_device_id s3c24xx_i2c_match[] = {
 	{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
 	{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
-	{ .compatible = "samsung,exynos5440-i2c",
-	  .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
 	{ .compatible = "samsung,exynos5-sata-phy-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
 	{},
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index d856bc211715..5fda4188a9e5 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -899,17 +899,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	if (resource_size(res) > 0x17)
 		pd->flags |= IIC_FLAG_HAS_ICIC67;
 
-	/* Enable Runtime PM for this device.
-	 *
-	 * Also tell the Runtime PM core to ignore children
-	 * for this device since it is valid for us to suspend
-	 * this I2C master driver even though the slave devices
-	 * on the I2C bus may not be suspended.
-	 *
-	 * The state of the I2C hardware bus is unaffected by
-	 * the Runtime PM state.
-	 */
-	pm_suspend_ignore_children(&dev->dev, true);
 	pm_runtime_enable(&dev->dev);
 	pm_runtime_get_sync(&dev->dev);
 
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
new file mode 100644
index 000000000000..d75fbcbf02ef
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -0,0 +1,153 @@
+/*
+ * i2c-stm32.c
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include "i2c-stm32.h"
+
+/* Functions for DMA support */
+struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
+					    dma_addr_t phy_addr,
+					    u32 txdr_offset,
+					    u32 rxdr_offset)
+{
+	struct stm32_i2c_dma *dma;
+	struct dma_slave_config dma_sconfig;
+	int ret;
+
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+	if (!dma)
+		return NULL;
+
+	/* Request and configure I2C TX dma channel */
+	dma->chan_tx = dma_request_slave_channel(dev, "tx");
+	if (!dma->chan_tx) {
+		dev_dbg(dev, "can't request DMA tx channel\n");
+		ret = -EINVAL;
+		goto fail_al;
+	}
+
+	memset(&dma_sconfig, 0, sizeof(dma_sconfig));
+	dma_sconfig.dst_addr = phy_addr + txdr_offset;
+	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.dst_maxburst = 1;
+	dma_sconfig.direction = DMA_MEM_TO_DEV;
+	ret = dmaengine_slave_config(dma->chan_tx, &dma_sconfig);
+	if (ret < 0) {
+		dev_err(dev, "can't configure tx channel\n");
+		goto fail_tx;
+	}
+
+	/* Request and configure I2C RX dma channel */
+	dma->chan_rx = dma_request_slave_channel(dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev, "can't request DMA rx channel\n");
+		ret = -EINVAL;
+		goto fail_tx;
+	}
+
+	memset(&dma_sconfig, 0, sizeof(dma_sconfig));
+	dma_sconfig.src_addr = phy_addr + rxdr_offset;
+	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.src_maxburst = 1;
+	dma_sconfig.direction = DMA_DEV_TO_MEM;
+	ret = dmaengine_slave_config(dma->chan_rx, &dma_sconfig);
+	if (ret < 0) {
+		dev_err(dev, "can't configure rx channel\n");
+		goto fail_rx;
+	}
+
+	init_completion(&dma->dma_complete);
+
+	dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
+		 dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
+
+	return dma;
+
+fail_rx:
+	dma_release_channel(dma->chan_rx);
+fail_tx:
+	dma_release_channel(dma->chan_tx);
+fail_al:
+	devm_kfree(dev, dma);
+	dev_info(dev, "can't use DMA\n");
+
+	return NULL;
+}
+
+void stm32_i2c_dma_free(struct stm32_i2c_dma *dma)
+{
+	dma->dma_buf = 0;
+	dma->dma_len = 0;
+
+	dma_release_channel(dma->chan_tx);
+	dma->chan_tx = NULL;
+
+	dma_release_channel(dma->chan_rx);
+	dma->chan_rx = NULL;
+
+	dma->chan_using = NULL;
+}
+
+int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
+			    bool rd_wr, u32 len, u8 *buf,
+			    dma_async_tx_callback callback,
+			    void *dma_async_param)
+{
+	struct dma_async_tx_descriptor *txdesc;
+	struct device *chan_dev;
+	int ret;
+
+	if (rd_wr) {
+		dma->chan_using = dma->chan_rx;
+		dma->dma_transfer_dir = DMA_DEV_TO_MEM;
+		dma->dma_data_dir = DMA_FROM_DEVICE;
+	} else {
+		dma->chan_using = dma->chan_tx;
+		dma->dma_transfer_dir = DMA_MEM_TO_DEV;
+		dma->dma_data_dir = DMA_TO_DEVICE;
+	}
+
+	dma->dma_len = len;
+	chan_dev = dma->chan_using->device->dev;
+
+	dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
+				      dma->dma_data_dir);
+	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+		dev_err(dev, "DMA mapping failed\n");
+		return -EINVAL;
+	}
+
+	txdesc = dmaengine_prep_slave_single(dma->chan_using, dma->dma_buf,
+					     dma->dma_len,
+					     dma->dma_transfer_dir,
+					     DMA_PREP_INTERRUPT);
+	if (!txdesc) {
+		dev_err(dev, "Not able to get desc for DMA xfer\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	reinit_completion(&dma->dma_complete);
+
+	txdesc->callback = callback;
+	txdesc->callback_param = dma_async_param;
+	ret = dma_submit_error(dmaengine_submit(txdesc));
+	if (ret < 0) {
+		dev_err(dev, "DMA submit failed\n");
+		goto err;
+	}
+
+	dma_async_issue_pending(dma->chan_using);
+
+	return 0;
+
+err:
+	dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
+			 dma->dma_data_dir);
+	return ret;
+}
diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h
index d4f9cef251ac..868755f82f88 100644
--- a/drivers/i2c/busses/i2c-stm32.h
+++ b/drivers/i2c/busses/i2c-stm32.h
@@ -11,6 +11,10 @@
 #ifndef _I2C_STM32_H
 #define _I2C_STM32_H
 
+#include <linux/dma-direction.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
 enum stm32_i2c_speed {
 	STM32_I2C_SPEED_STANDARD, /* 100 kHz */
 	STM32_I2C_SPEED_FAST, /* 400 kHz */
@@ -18,4 +22,37 @@ enum stm32_i2c_speed {
 	STM32_I2C_SPEED_END,
 };
 
+/**
+ * struct stm32_i2c_dma - DMA specific data
+ * @chan_tx: dma channel for TX transfer
+ * @chan_rx: dma channel for RX transfer
+ * @chan_using: dma channel used for the current transfer (TX or RX)
+ * @dma_buf: dma buffer
+ * @dma_len: dma buffer len
+ * @dma_transfer_dir: dma transfer direction indicator
+ * @dma_data_dir: dma transfer mode indicator
+ * @dma_complete: dma transfer completion
+ */
+struct stm32_i2c_dma {
+	struct dma_chan *chan_tx;
+	struct dma_chan *chan_rx;
+	struct dma_chan *chan_using;
+	dma_addr_t dma_buf;
+	unsigned int dma_len;
+	enum dma_transfer_direction dma_transfer_dir;
+	enum dma_data_direction dma_data_dir;
+	struct completion dma_complete;
+};
+
+struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
+					    dma_addr_t phy_addr,
+					    u32 txdr_offset, u32 rxdr_offset);
+
+void stm32_i2c_dma_free(struct stm32_i2c_dma *dma);
+
+int stm32_i2c_prep_dma_xfer(struct device *dev, struct stm32_i2c_dma *dma,
+			    bool rd_wr, u32 len, u8 *buf,
+			    dma_async_tx_callback callback,
+			    void *dma_async_param);
+
 #endif /* _I2C_STM32_H */
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index f273e28c39db..62d023e737d9 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -35,6 +35,9 @@
 /* STM32F7 I2C registers */
 #define STM32F7_I2C_CR1				0x00
 #define STM32F7_I2C_CR2				0x04
+#define STM32F7_I2C_OAR1			0x08
+#define STM32F7_I2C_OAR2			0x0C
+#define STM32F7_I2C_PECR			0x20
 #define STM32F7_I2C_TIMINGR			0x10
 #define STM32F7_I2C_ISR				0x18
 #define STM32F7_I2C_ICR				0x1C
@@ -42,6 +45,10 @@
 #define STM32F7_I2C_TXDR			0x28
 
 /* STM32F7 I2C control 1 */
+#define STM32F7_I2C_CR1_PECEN			BIT(23)
+#define STM32F7_I2C_CR1_SBC			BIT(16)
+#define STM32F7_I2C_CR1_RXDMAEN			BIT(15)
+#define STM32F7_I2C_CR1_TXDMAEN			BIT(14)
 #define STM32F7_I2C_CR1_ANFOFF			BIT(12)
 #define STM32F7_I2C_CR1_ERRIE			BIT(7)
 #define STM32F7_I2C_CR1_TCIE			BIT(6)
@@ -57,34 +64,77 @@
 						| STM32F7_I2C_CR1_NACKIE \
 						| STM32F7_I2C_CR1_RXIE \
 						| STM32F7_I2C_CR1_TXIE)
+#define STM32F7_I2C_XFER_IRQ_MASK		(STM32F7_I2C_CR1_TCIE \
+						| STM32F7_I2C_CR1_STOPIE \
+						| STM32F7_I2C_CR1_NACKIE \
+						| STM32F7_I2C_CR1_RXIE \
+						| STM32F7_I2C_CR1_TXIE)
 
 /* STM32F7 I2C control 2 */
+#define STM32F7_I2C_CR2_PECBYTE			BIT(26)
 #define STM32F7_I2C_CR2_RELOAD			BIT(24)
 #define STM32F7_I2C_CR2_NBYTES_MASK		GENMASK(23, 16)
 #define STM32F7_I2C_CR2_NBYTES(n)		(((n) & 0xff) << 16)
 #define STM32F7_I2C_CR2_NACK			BIT(15)
 #define STM32F7_I2C_CR2_STOP			BIT(14)
 #define STM32F7_I2C_CR2_START			BIT(13)
+#define STM32F7_I2C_CR2_HEAD10R			BIT(12)
+#define STM32F7_I2C_CR2_ADD10			BIT(11)
 #define STM32F7_I2C_CR2_RD_WRN			BIT(10)
+#define STM32F7_I2C_CR2_SADD10_MASK		GENMASK(9, 0)
+#define STM32F7_I2C_CR2_SADD10(n)		(((n) & \
+						STM32F7_I2C_CR2_SADD10_MASK))
 #define STM32F7_I2C_CR2_SADD7_MASK		GENMASK(7, 1)
 #define STM32F7_I2C_CR2_SADD7(n)		(((n) & 0x7f) << 1)
 
+/* STM32F7 I2C Own Address 1 */
+#define STM32F7_I2C_OAR1_OA1EN			BIT(15)
+#define STM32F7_I2C_OAR1_OA1MODE		BIT(10)
+#define STM32F7_I2C_OAR1_OA1_10_MASK		GENMASK(9, 0)
+#define STM32F7_I2C_OAR1_OA1_10(n)		(((n) & \
+						STM32F7_I2C_OAR1_OA1_10_MASK))
+#define STM32F7_I2C_OAR1_OA1_7_MASK		GENMASK(7, 1)
+#define STM32F7_I2C_OAR1_OA1_7(n)		(((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR1_MASK			(STM32F7_I2C_OAR1_OA1_7_MASK \
+						| STM32F7_I2C_OAR1_OA1_10_MASK \
+						| STM32F7_I2C_OAR1_OA1EN \
+						| STM32F7_I2C_OAR1_OA1MODE)
+
+/* STM32F7 I2C Own Address 2 */
+#define STM32F7_I2C_OAR2_OA2EN			BIT(15)
+#define STM32F7_I2C_OAR2_OA2MSK_MASK		GENMASK(10, 8)
+#define STM32F7_I2C_OAR2_OA2MSK(n)		(((n) & 0x7) << 8)
+#define STM32F7_I2C_OAR2_OA2_7_MASK		GENMASK(7, 1)
+#define STM32F7_I2C_OAR2_OA2_7(n)		(((n) & 0x7f) << 1)
+#define STM32F7_I2C_OAR2_MASK			(STM32F7_I2C_OAR2_OA2MSK_MASK \
+						| STM32F7_I2C_OAR2_OA2_7_MASK \
+						| STM32F7_I2C_OAR2_OA2EN)
+
 /* STM32F7 I2C Interrupt Status */
+#define STM32F7_I2C_ISR_ADDCODE_MASK		GENMASK(23, 17)
+#define STM32F7_I2C_ISR_ADDCODE_GET(n) \
+				(((n) & STM32F7_I2C_ISR_ADDCODE_MASK) >> 17)
+#define STM32F7_I2C_ISR_DIR			BIT(16)
 #define STM32F7_I2C_ISR_BUSY			BIT(15)
+#define STM32F7_I2C_ISR_PECERR			BIT(11)
 #define STM32F7_I2C_ISR_ARLO			BIT(9)
 #define STM32F7_I2C_ISR_BERR			BIT(8)
 #define STM32F7_I2C_ISR_TCR			BIT(7)
 #define STM32F7_I2C_ISR_TC			BIT(6)
 #define STM32F7_I2C_ISR_STOPF			BIT(5)
 #define STM32F7_I2C_ISR_NACKF			BIT(4)
+#define STM32F7_I2C_ISR_ADDR			BIT(3)
 #define STM32F7_I2C_ISR_RXNE			BIT(2)
 #define STM32F7_I2C_ISR_TXIS			BIT(1)
+#define STM32F7_I2C_ISR_TXE			BIT(0)
 
 /* STM32F7 I2C Interrupt Clear */
+#define STM32F7_I2C_ICR_PECCF			BIT(11)
 #define STM32F7_I2C_ICR_ARLOCF			BIT(9)
 #define STM32F7_I2C_ICR_BERRCF			BIT(8)
 #define STM32F7_I2C_ICR_STOPCF			BIT(5)
 #define STM32F7_I2C_ICR_NACKCF			BIT(4)
+#define STM32F7_I2C_ICR_ADDRCF			BIT(3)
 
 /* STM32F7 I2C Timing */
 #define STM32F7_I2C_TIMINGR_PRESC(n)		(((n) & 0xf) << 28)
@@ -94,6 +144,8 @@
 #define STM32F7_I2C_TIMINGR_SCLL(n)		((n) & 0xff)
 
 #define STM32F7_I2C_MAX_LEN			0xff
+#define STM32F7_I2C_DMA_LEN_MIN			0x16
+#define STM32F7_I2C_MAX_SLAVE			0x2
 
 #define STM32F7_I2C_DNF_DEFAULT			0
 #define STM32F7_I2C_DNF_MAX			16
@@ -159,11 +211,12 @@ struct stm32f7_i2c_setup {
 
 /**
  * struct stm32f7_i2c_timings - private I2C output parameters
- * @prec: Prescaler value
+ * @node: List entry
+ * @presc: Prescaler value
  * @scldel: Data setup time
  * @sdadel: Data hold time
  * @sclh: SCL high period (master mode)
- * @sclh: SCL low period (master mode)
+ * @scll: SCL low period (master mode)
  */
 struct stm32f7_i2c_timings {
 	struct list_head node;
@@ -176,18 +229,30 @@ struct stm32f7_i2c_timings {
 
 /**
  * struct stm32f7_i2c_msg - client specific data
- * @addr: 8-bit slave addr, including r/w bit
+ * @addr: 8-bit or 10-bit slave addr, including r/w bit
  * @count: number of bytes to be transferred
  * @buf: data buffer
  * @result: result of the transfer
  * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ * @smbus: boolean to know if the I2C IP is used in SMBus mode
+ * @size: type of SMBus protocol
+ * @read_write: direction of SMBus protocol
+ * SMBus block read and SMBus block write - block read process call protocols
+ * @smbus_buf: buffer to be used for SMBus protocol transfer. It will
+ * contain a maximum of 32 bytes of data + byte command + byte count + PEC
+ * This buffer has to be 32-bit aligned to be compliant with memory address
+ * register in DMA mode.
  */
 struct stm32f7_i2c_msg {
-	u8 addr;
+	u16 addr;
 	u32 count;
 	u8 *buf;
 	int result;
 	bool stop;
+	bool smbus;
+	int size;
+	char read_write;
+	u8 smbus_buf[I2C_SMBUS_BLOCK_MAX + 3] __aligned(4);
 };
 
 /**
@@ -204,6 +269,13 @@ struct stm32f7_i2c_msg {
  * @f7_msg: customized i2c msg for driver usage
  * @setup: I2C timing input setup
  * @timing: I2C computed timings
+ * @slave: list of slave devices registered on the I2C bus
+ * @slave_running: slave device currently used
+ * @slave_dir: transfer direction for the current slave device
+ * @master_mode: boolean to know in which mode the I2C is running (master or
+ * slave)
+ * @dma: dma data
+ * @use_dma: boolean to know if dma is used in the current transfer
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -218,6 +290,12 @@ struct stm32f7_i2c_dev {
 	struct stm32f7_i2c_msg f7_msg;
 	struct stm32f7_i2c_setup setup;
 	struct stm32f7_i2c_timings timing;
+	struct i2c_client *slave[STM32F7_I2C_MAX_SLAVE];
+	struct i2c_client *slave_running;
+	u32 slave_dir;
+	bool master_mode;
+	struct stm32_i2c_dma *dma;
+	bool use_dma;
 };
 
 /**
@@ -283,6 +361,11 @@ static inline void stm32f7_i2c_clr_bits(void __iomem *reg, u32 mask)
 	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
 }
 
+static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+{
+	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+}
+
 static int stm32f7_i2c_compute_timing(struct stm32f7_i2c_dev *i2c_dev,
 				      struct stm32f7_i2c_setup *setup,
 				      struct stm32f7_i2c_timings *output)
@@ -524,6 +607,25 @@ static int stm32f7_i2c_setup_timing(struct stm32f7_i2c_dev *i2c_dev,
 	return 0;
 }
 
+static void stm32f7_i2c_disable_dma_req(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+	u32 mask = STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN;
+
+	stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+}
+
+static void stm32f7_i2c_dma_callback(void *arg)
+{
+	struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
+	struct device *dev = dma->chan_using->device->dev;
+
+	stm32f7_i2c_disable_dma_req(i2c_dev);
+	dma_unmap_single(dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir);
+	complete(&dma->dma_complete);
+}
+
 static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
 {
 	struct stm32f7_i2c_timings *t = &i2c_dev->timing;
@@ -567,6 +669,9 @@ static void stm32f7_i2c_read_rx_data(struct stm32f7_i2c_dev *i2c_dev)
 	if (f7_msg->count) {
 		*f7_msg->buf++ = readb_relaxed(base + STM32F7_I2C_RXDR);
 		f7_msg->count--;
+	} else {
+		/* Flush RX buffer has no data is expected */
+		readb_relaxed(base + STM32F7_I2C_RXDR);
 	}
 }
 
@@ -575,6 +680,9 @@ static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	u32 cr2;
 
+	if (i2c_dev->use_dma)
+		f7_msg->count -= STM32F7_I2C_MAX_LEN;
+
 	cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
 
 	cr2 &= ~STM32F7_I2C_CR2_NBYTES_MASK;
@@ -588,6 +696,43 @@ static void stm32f7_i2c_reload(struct stm32f7_i2c_dev *i2c_dev)
 	writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
 }
 
+static void stm32f7_i2c_smbus_reload(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	u32 cr2;
+	u8 *val;
+
+	/*
+	 * For I2C_SMBUS_BLOCK_DATA && I2C_SMBUS_BLOCK_PROC_CALL, the first
+	 * data received inform us how many data will follow.
+	 */
+	stm32f7_i2c_read_rx_data(i2c_dev);
+
+	/*
+	 * Update NBYTES with the value read to continue the transfer
+	 */
+	val = f7_msg->buf - sizeof(u8);
+	f7_msg->count = *val;
+	cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+	cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+	writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_release_bus(struct i2c_adapter *i2c_adap)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+
+	dev_info(i2c_dev->dev, "Trying to recover bus\n");
+
+	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
+			     STM32F7_I2C_CR1_PE);
+
+	stm32f7_i2c_hw_config(i2c_dev);
+
+	return 0;
+}
+
 static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
 {
 	u32 status;
@@ -597,12 +742,18 @@ static int stm32f7_i2c_wait_free_bus(struct stm32f7_i2c_dev *i2c_dev)
 					 status,
 					 !(status & STM32F7_I2C_ISR_BUSY),
 					 10, 1000);
+	if (!ret)
+		return 0;
+
+	dev_info(i2c_dev->dev, "bus busy\n");
+
+	ret = stm32f7_i2c_release_bus(&i2c_dev->adap);
 	if (ret) {
-		dev_dbg(i2c_dev->dev, "bus busy\n");
-		ret = -EBUSY;
+		dev_err(i2c_dev->dev, "Failed to recover the bus (%d)\n", ret);
+		return ret;
 	}
 
-	return ret;
+	return -EBUSY;
 }
 
 static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
@@ -611,6 +762,7 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	void __iomem *base = i2c_dev->base;
 	u32 cr1, cr2;
+	int ret;
 
 	f7_msg->addr = msg->addr;
 	f7_msg->buf = msg->buf;
@@ -629,8 +781,15 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 		cr2 |= STM32F7_I2C_CR2_RD_WRN;
 
 	/* Set slave address */
-	cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
-	cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+	cr2 &= ~(STM32F7_I2C_CR2_HEAD10R | STM32F7_I2C_CR2_ADD10);
+	if (msg->flags & I2C_M_TEN) {
+		cr2 &= ~STM32F7_I2C_CR2_SADD10_MASK;
+		cr2 |= STM32F7_I2C_CR2_SADD10(f7_msg->addr);
+		cr2 |= STM32F7_I2C_CR2_ADD10;
+	} else {
+		cr2 &= ~STM32F7_I2C_CR2_SADD7_MASK;
+		cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+	}
 
 	/* Set nb bytes to transfer and reload if needed */
 	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
@@ -645,16 +804,286 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 	cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
 		STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
 
-	/* Clear TX/RX interrupt */
+	/* Clear DMA req and TX/RX interrupt */
+	cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+			STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+	/* Configure DMA or enable RX/TX interrupt */
+	i2c_dev->use_dma = false;
+	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+		ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+					      msg->flags & I2C_M_RD,
+					      f7_msg->count, f7_msg->buf,
+					      stm32f7_i2c_dma_callback,
+					      i2c_dev);
+		if (!ret)
+			i2c_dev->use_dma = true;
+		else
+			dev_warn(i2c_dev->dev, "can't use DMA\n");
+	}
+
+	if (!i2c_dev->use_dma) {
+		if (msg->flags & I2C_M_RD)
+			cr1 |= STM32F7_I2C_CR1_RXIE;
+		else
+			cr1 |= STM32F7_I2C_CR1_TXIE;
+	} else {
+		if (msg->flags & I2C_M_RD)
+			cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+		else
+			cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+	}
+
+	/* Configure Start/Repeated Start */
+	cr2 |= STM32F7_I2C_CR2_START;
+
+	i2c_dev->master_mode = true;
+
+	/* Write configurations registers */
+	writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+	writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+}
+
+static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
+				      unsigned short flags, u8 command,
+				      union i2c_smbus_data *data)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	struct device *dev = i2c_dev->dev;
+	void __iomem *base = i2c_dev->base;
+	u32 cr1, cr2;
+	int i, ret;
+
+	f7_msg->result = 0;
+	reinit_completion(&i2c_dev->complete);
+
+	cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+	cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+	/* Set transfer direction */
+	cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+	if (f7_msg->read_write)
+		cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+	/* Set slave address */
+	cr2 &= ~(STM32F7_I2C_CR2_ADD10 | STM32F7_I2C_CR2_SADD7_MASK);
+	cr2 |= STM32F7_I2C_CR2_SADD7(f7_msg->addr);
+
+	f7_msg->smbus_buf[0] = command;
+	switch (f7_msg->size) {
+	case I2C_SMBUS_QUICK:
+		f7_msg->stop = true;
+		f7_msg->count = 0;
+		break;
+	case I2C_SMBUS_BYTE:
+		f7_msg->stop = true;
+		f7_msg->count = 1;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (f7_msg->read_write) {
+			f7_msg->stop = false;
+			f7_msg->count = 1;
+			cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+		} else {
+			f7_msg->stop = true;
+			f7_msg->count = 2;
+			f7_msg->smbus_buf[1] = data->byte;
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (f7_msg->read_write) {
+			f7_msg->stop = false;
+			f7_msg->count = 1;
+			cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+		} else {
+			f7_msg->stop = true;
+			f7_msg->count = 3;
+			f7_msg->smbus_buf[1] = data->word & 0xff;
+			f7_msg->smbus_buf[2] = data->word >> 8;
+		}
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (f7_msg->read_write) {
+			f7_msg->stop = false;
+			f7_msg->count = 1;
+			cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+		} else {
+			f7_msg->stop = true;
+			if (data->block[0] > I2C_SMBUS_BLOCK_MAX ||
+			    !data->block[0]) {
+				dev_err(dev, "Invalid block write size %d\n",
+					data->block[0]);
+				return -EINVAL;
+			}
+			f7_msg->count = data->block[0] + 2;
+			for (i = 1; i < f7_msg->count; i++)
+				f7_msg->smbus_buf[i] = data->block[i - 1];
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		f7_msg->stop = false;
+		f7_msg->count = 3;
+		f7_msg->smbus_buf[1] = data->word & 0xff;
+		f7_msg->smbus_buf[2] = data->word >> 8;
+		cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+		f7_msg->read_write = I2C_SMBUS_READ;
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		f7_msg->stop = false;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX - 1) {
+			dev_err(dev, "Invalid block write size %d\n",
+				data->block[0]);
+			return -EINVAL;
+		}
+		f7_msg->count = data->block[0] + 2;
+		for (i = 1; i < f7_msg->count; i++)
+			f7_msg->smbus_buf[i] = data->block[i - 1];
+		cr2 &= ~STM32F7_I2C_CR2_RD_WRN;
+		f7_msg->read_write = I2C_SMBUS_READ;
+		break;
+	default:
+		dev_err(dev, "Unsupported smbus protocol %d\n", f7_msg->size);
+		return -EOPNOTSUPP;
+	}
+
+	f7_msg->buf = f7_msg->smbus_buf;
+
+	/* Configure PEC */
+	if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
+		cr1 |= STM32F7_I2C_CR1_PECEN;
+		cr2 |= STM32F7_I2C_CR2_PECBYTE;
+		if (!f7_msg->read_write)
+			f7_msg->count++;
+	} else {
+		cr1 &= ~STM32F7_I2C_CR1_PECEN;
+		cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
+	}
+
+	/* Set number of bytes to be transferred */
+	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK | STM32F7_I2C_CR2_RELOAD);
+	cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+	/* Enable NACK, STOP, error and transfer complete interrupts */
+	cr1 |= STM32F7_I2C_CR1_ERRIE | STM32F7_I2C_CR1_TCIE |
+		STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE;
+
+	/* Clear DMA req and TX/RX interrupt */
+	cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+			STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+	/* Configure DMA or enable RX/TX interrupt */
+	i2c_dev->use_dma = false;
+	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN) {
+		ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+					      cr2 & STM32F7_I2C_CR2_RD_WRN,
+					      f7_msg->count, f7_msg->buf,
+					      stm32f7_i2c_dma_callback,
+					      i2c_dev);
+		if (!ret)
+			i2c_dev->use_dma = true;
+		else
+			dev_warn(i2c_dev->dev, "can't use DMA\n");
+	}
+
+	if (!i2c_dev->use_dma) {
+		if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+			cr1 |= STM32F7_I2C_CR1_RXIE;
+		else
+			cr1 |= STM32F7_I2C_CR1_TXIE;
+	} else {
+		if (cr2 & STM32F7_I2C_CR2_RD_WRN)
+			cr1 |= STM32F7_I2C_CR1_RXDMAEN;
+		else
+			cr1 |= STM32F7_I2C_CR1_TXDMAEN;
+	}
+
+	/* Set Start bit */
+	cr2 |= STM32F7_I2C_CR2_START;
+
+	i2c_dev->master_mode = true;
+
+	/* Write configurations registers */
+	writel_relaxed(cr1, base + STM32F7_I2C_CR1);
+	writel_relaxed(cr2, base + STM32F7_I2C_CR2);
+
+	return 0;
+}
+
+static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	void __iomem *base = i2c_dev->base;
+	u32 cr1, cr2;
+	int ret;
+
+	cr2 = readl_relaxed(base + STM32F7_I2C_CR2);
+	cr1 = readl_relaxed(base + STM32F7_I2C_CR1);
+
+	/* Set transfer direction */
+	cr2 |= STM32F7_I2C_CR2_RD_WRN;
+
+	switch (f7_msg->size) {
+	case I2C_SMBUS_BYTE_DATA:
+		f7_msg->count = 1;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		f7_msg->count = 2;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		f7_msg->count = 1;
+		cr2 |= STM32F7_I2C_CR2_RELOAD;
+		break;
+	}
+
+	f7_msg->buf = f7_msg->smbus_buf;
+	f7_msg->stop = true;
+
+	/* Add one byte for PEC if needed */
+	if (cr1 & STM32F7_I2C_CR1_PECEN)
+		f7_msg->count++;
+
+	/* Set number of bytes to be transferred */
+	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
+	cr2 |= STM32F7_I2C_CR2_NBYTES(f7_msg->count);
+
+	/*
+	 * Configure RX/TX interrupt:
+	 */
 	cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE);
+	cr1 |= STM32F7_I2C_CR1_RXIE;
 
-	/* Enable RX/TX interrupt according to msg direction */
-	if (msg->flags & I2C_M_RD)
+	/*
+	 * Configure DMA or enable RX/TX interrupt:
+	 * For I2C_SMBUS_BLOCK_DATA and I2C_SMBUS_BLOCK_PROC_CALL we don't use
+	 * dma as we don't know in advance how many data will be received
+	 */
+	cr1 &= ~(STM32F7_I2C_CR1_RXIE | STM32F7_I2C_CR1_TXIE |
+		 STM32F7_I2C_CR1_RXDMAEN | STM32F7_I2C_CR1_TXDMAEN);
+
+	i2c_dev->use_dma = false;
+	if (i2c_dev->dma && f7_msg->count >= STM32F7_I2C_DMA_LEN_MIN &&
+	    f7_msg->size != I2C_SMBUS_BLOCK_DATA &&
+	    f7_msg->size != I2C_SMBUS_BLOCK_PROC_CALL) {
+		ret = stm32_i2c_prep_dma_xfer(i2c_dev->dev, i2c_dev->dma,
+					      cr2 & STM32F7_I2C_CR2_RD_WRN,
+					      f7_msg->count, f7_msg->buf,
+					      stm32f7_i2c_dma_callback,
+					      i2c_dev);
+
+		if (!ret)
+			i2c_dev->use_dma = true;
+		else
+			dev_warn(i2c_dev->dev, "can't use DMA\n");
+	}
+
+	if (!i2c_dev->use_dma)
 		cr1 |= STM32F7_I2C_CR1_RXIE;
 	else
-		cr1 |= STM32F7_I2C_CR1_TXIE;
+		cr1 |= STM32F7_I2C_CR1_RXDMAEN;
 
-	/* Configure Start/Repeated Start */
+	/* Configure Repeated Start */
 	cr2 |= STM32F7_I2C_CR2_START;
 
 	/* Write configurations registers */
@@ -662,9 +1091,278 @@ static void stm32f7_i2c_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 	writel_relaxed(cr2, base + STM32F7_I2C_CR2);
 }
 
-static void stm32f7_i2c_disable_irq(struct stm32f7_i2c_dev *i2c_dev, u32 mask)
+static int stm32f7_i2c_smbus_check_pec(struct stm32f7_i2c_dev *i2c_dev)
 {
-	stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, mask);
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	u8 count, internal_pec, received_pec;
+
+	internal_pec = readl_relaxed(i2c_dev->base + STM32F7_I2C_PECR);
+
+	switch (f7_msg->size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		received_pec = f7_msg->smbus_buf[1];
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		received_pec = f7_msg->smbus_buf[2];
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		count = f7_msg->smbus_buf[0];
+		received_pec = f7_msg->smbus_buf[count];
+		break;
+	default:
+		dev_err(i2c_dev->dev, "Unsupported smbus protocol for PEC\n");
+		return -EINVAL;
+	}
+
+	if (internal_pec != received_pec) {
+		dev_err(i2c_dev->dev, "Bad PEC 0x%02x vs. 0x%02x\n",
+			internal_pec, received_pec);
+		return -EBADMSG;
+	}
+
+	return 0;
+}
+
+static bool stm32f7_i2c_is_addr_match(struct i2c_client *slave, u32 addcode)
+{
+	u32 addr;
+
+	if (!slave)
+		return false;
+
+	if (slave->flags & I2C_CLIENT_TEN) {
+		/*
+		 * For 10-bit addr, addcode = 11110XY with
+		 * X = Bit 9 of slave address
+		 * Y = Bit 8 of slave address
+		 */
+		addr = slave->addr >> 8;
+		addr |= 0x78;
+		if (addr == addcode)
+			return true;
+	} else {
+		addr = slave->addr & 0x7f;
+		if (addr == addcode)
+			return true;
+	}
+
+	return false;
+}
+
+static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct i2c_client *slave = i2c_dev->slave_running;
+	void __iomem *base = i2c_dev->base;
+	u32 mask;
+	u8 value = 0;
+
+	if (i2c_dev->slave_dir) {
+		/* Notify i2c slave that new read transfer is starting */
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+		/*
+		 * Disable slave TX config in case of I2C combined message
+		 * (I2C Write followed by I2C Read)
+		 */
+		mask = STM32F7_I2C_CR2_RELOAD;
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, mask);
+		mask = STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+		       STM32F7_I2C_CR1_TCIE;
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1, mask);
+
+		/* Enable TX empty, STOP, NACK interrupts */
+		mask =  STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+			STM32F7_I2C_CR1_TXIE;
+		stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+	} else {
+		/* Notify i2c slave that new write transfer is starting */
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+		/* Set reload mode to be able to ACK/NACK each received byte */
+		mask = STM32F7_I2C_CR2_RELOAD;
+		stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+
+		/*
+		 * Set STOP, NACK, RX empty and transfer complete interrupts.*
+		 * Set Slave Byte Control to be able to ACK/NACK each data
+		 * byte received
+		 */
+		mask =  STM32F7_I2C_CR1_STOPIE | STM32F7_I2C_CR1_NACKIE |
+			STM32F7_I2C_CR1_SBC | STM32F7_I2C_CR1_RXIE |
+			STM32F7_I2C_CR1_TCIE;
+		stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+	}
+}
+
+static void stm32f7_i2c_slave_addr(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+	u32 isr, addcode, dir, mask;
+	int i;
+
+	isr = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+	addcode = STM32F7_I2C_ISR_ADDCODE_GET(isr);
+	dir = isr & STM32F7_I2C_ISR_DIR;
+
+	for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+		if (stm32f7_i2c_is_addr_match(i2c_dev->slave[i], addcode)) {
+			i2c_dev->slave_running = i2c_dev->slave[i];
+			i2c_dev->slave_dir = dir;
+
+			/* Start I2C slave processing */
+			stm32f7_i2c_slave_start(i2c_dev);
+
+			/* Clear ADDR flag */
+			mask = STM32F7_I2C_ICR_ADDRCF;
+			writel_relaxed(mask, base + STM32F7_I2C_ICR);
+			break;
+		}
+	}
+}
+
+static int stm32f7_i2c_get_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+				    struct i2c_client *slave, int *id)
+{
+	int i;
+
+	for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+		if (i2c_dev->slave[i] == slave) {
+			*id = i;
+			return 0;
+		}
+	}
+
+	dev_err(i2c_dev->dev, "Slave 0x%x not registered\n", slave->addr);
+
+	return -ENODEV;
+}
+
+static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
+					 struct i2c_client *slave, int *id)
+{
+	struct device *dev = i2c_dev->dev;
+	int i;
+
+	/*
+	 * slave[0] supports 7-bit and 10-bit slave address
+	 * slave[1] supports 7-bit slave address only
+	 */
+	for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+		if (i == 1 && (slave->flags & I2C_CLIENT_PEC))
+			continue;
+		if (!i2c_dev->slave[i]) {
+			*id = i;
+			return 0;
+		}
+	}
+
+	dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
+
+	return -EINVAL;
+}
+
+static bool stm32f7_i2c_is_slave_registered(struct stm32f7_i2c_dev *i2c_dev)
+{
+	int i;
+
+	for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+		if (i2c_dev->slave[i])
+			return true;
+	}
+
+	return false;
+}
+
+static bool stm32f7_i2c_is_slave_busy(struct stm32f7_i2c_dev *i2c_dev)
+{
+	int i, busy;
+
+	busy = 0;
+	for (i = 0; i < STM32F7_I2C_MAX_SLAVE; i++) {
+		if (i2c_dev->slave[i])
+			busy++;
+	}
+
+	return i == busy;
+}
+
+static irqreturn_t stm32f7_i2c_slave_isr_event(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+	u32 cr2, status, mask;
+	u8 val;
+	int ret;
+
+	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+	/* Slave transmitter mode */
+	if (status & STM32F7_I2C_ISR_TXIS) {
+		i2c_slave_event(i2c_dev->slave_running,
+				I2C_SLAVE_READ_PROCESSED,
+				&val);
+
+		/* Write data byte */
+		writel_relaxed(val, base + STM32F7_I2C_TXDR);
+	}
+
+	/* Transfer Complete Reload for Slave receiver mode */
+	if (status & STM32F7_I2C_ISR_TCR || status & STM32F7_I2C_ISR_RXNE) {
+		/*
+		 * Read data byte then set NBYTES to receive next byte or NACK
+		 * the current received byte
+		 */
+		val = readb_relaxed(i2c_dev->base + STM32F7_I2C_RXDR);
+		ret = i2c_slave_event(i2c_dev->slave_running,
+				      I2C_SLAVE_WRITE_RECEIVED,
+				      &val);
+		if (!ret) {
+			cr2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_CR2);
+			cr2 |= STM32F7_I2C_CR2_NBYTES(1);
+			writel_relaxed(cr2, i2c_dev->base + STM32F7_I2C_CR2);
+		} else {
+			mask = STM32F7_I2C_CR2_NACK;
+			stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+		}
+	}
+
+	/* NACK received */
+	if (status & STM32F7_I2C_ISR_NACKF) {
+		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK\n", __func__);
+		writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+	}
+
+	/* STOP received */
+	if (status & STM32F7_I2C_ISR_STOPF) {
+		/* Disable interrupts */
+		stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_XFER_IRQ_MASK);
+
+		if (i2c_dev->slave_dir) {
+			/*
+			 * Flush TX buffer in order to not used the byte in
+			 * TXDR for the next transfer
+			 */
+			mask = STM32F7_I2C_ISR_TXE;
+			stm32f7_i2c_set_bits(base + STM32F7_I2C_ISR, mask);
+		}
+
+		/* Clear STOP flag */
+		writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
+
+		/* Notify i2c slave that a STOP flag has been detected */
+		i2c_slave_event(i2c_dev->slave_running, I2C_SLAVE_STOP, &val);
+
+		i2c_dev->slave_running = NULL;
+	}
+
+	/* Address match received */
+	if (status & STM32F7_I2C_ISR_ADDR)
+		stm32f7_i2c_slave_addr(i2c_dev);
+
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
@@ -673,6 +1371,13 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	void __iomem *base = i2c_dev->base;
 	u32 status, mask;
+	int ret = IRQ_HANDLED;
+
+	/* Check if the interrupt if for a slave device */
+	if (!i2c_dev->master_mode) {
+		ret = stm32f7_i2c_slave_isr_event(i2c_dev);
+		return ret;
+	}
 
 	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
 
@@ -694,12 +1399,21 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 	/* STOP detection flag */
 	if (status & STM32F7_I2C_ISR_STOPF) {
 		/* Disable interrupts */
-		stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+		if (stm32f7_i2c_is_slave_registered(i2c_dev))
+			mask = STM32F7_I2C_XFER_IRQ_MASK;
+		else
+			mask = STM32F7_I2C_ALL_IRQ_MASK;
+		stm32f7_i2c_disable_irq(i2c_dev, mask);
 
 		/* Clear STOP flag */
 		writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
 
-		complete(&i2c_dev->complete);
+		if (i2c_dev->use_dma) {
+			ret = IRQ_WAKE_THREAD;
+		} else {
+			i2c_dev->master_mode = false;
+			complete(&i2c_dev->complete);
+		}
 	}
 
 	/* Transfer complete */
@@ -707,6 +1421,10 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 		if (f7_msg->stop) {
 			mask = STM32F7_I2C_CR2_STOP;
 			stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
+		} else if (i2c_dev->use_dma) {
+			ret = IRQ_WAKE_THREAD;
+		} else if (f7_msg->smbus) {
+			stm32f7_i2c_smbus_rep_start(i2c_dev);
 		} else {
 			i2c_dev->msg_id++;
 			i2c_dev->msg++;
@@ -714,13 +1432,50 @@ static irqreturn_t stm32f7_i2c_isr_event(int irq, void *data)
 		}
 	}
 
+	if (status & STM32F7_I2C_ISR_TCR) {
+		if (f7_msg->smbus)
+			stm32f7_i2c_smbus_reload(i2c_dev);
+		else
+			stm32f7_i2c_reload(i2c_dev);
+	}
+
+	return ret;
+}
+
+static irqreturn_t stm32f7_i2c_isr_event_thread(int irq, void *data)
+{
+	struct stm32f7_i2c_dev *i2c_dev = data;
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
+	u32 status;
+	int ret;
+
 	/*
-	 * Transfer Complete Reload: 255 data bytes have been transferred
-	 * We have to prepare the I2C controller to transfer the remaining
-	 * data.
+	 * Wait for dma transfer completion before sending next message or
+	 * notity the end of xfer to the client
 	 */
-	if (status & STM32F7_I2C_ISR_TCR)
-		stm32f7_i2c_reload(i2c_dev);
+	ret = wait_for_completion_timeout(&i2c_dev->dma->dma_complete, HZ);
+	if (!ret) {
+		dev_dbg(i2c_dev->dev, "<%s>: Timed out\n", __func__);
+		stm32f7_i2c_disable_dma_req(i2c_dev);
+		dmaengine_terminate_all(dma->chan_using);
+		f7_msg->result = -ETIMEDOUT;
+	}
+
+	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
+
+	if (status & STM32F7_I2C_ISR_TC) {
+		if (f7_msg->smbus) {
+			stm32f7_i2c_smbus_rep_start(i2c_dev);
+		} else {
+			i2c_dev->msg_id++;
+			i2c_dev->msg++;
+			stm32f7_i2c_xfer_msg(i2c_dev, i2c_dev->msg);
+		}
+	} else {
+		i2c_dev->master_mode = false;
+		complete(&i2c_dev->complete);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -731,7 +1486,8 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	void __iomem *base = i2c_dev->base;
 	struct device *dev = i2c_dev->dev;
-	u32 status;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
+	u32 mask, status;
 
 	status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
 
@@ -739,6 +1495,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 	if (status & STM32F7_I2C_ISR_BERR) {
 		dev_err(dev, "<%s>: Bus error\n", __func__);
 		writel_relaxed(STM32F7_I2C_ICR_BERRCF, base + STM32F7_I2C_ICR);
+		stm32f7_i2c_release_bus(&i2c_dev->adap);
 		f7_msg->result = -EIO;
 	}
 
@@ -749,8 +1506,26 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
 		f7_msg->result = -EAGAIN;
 	}
 
-	stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+	if (status & STM32F7_I2C_ISR_PECERR) {
+		dev_err(dev, "<%s>: PEC error in reception\n", __func__);
+		writel_relaxed(STM32F7_I2C_ICR_PECCF, base + STM32F7_I2C_ICR);
+		f7_msg->result = -EINVAL;
+	}
+
+	/* Disable interrupts */
+	if (stm32f7_i2c_is_slave_registered(i2c_dev))
+		mask = STM32F7_I2C_XFER_IRQ_MASK;
+	else
+		mask = STM32F7_I2C_ALL_IRQ_MASK;
+	stm32f7_i2c_disable_irq(i2c_dev, mask);
+
+	/* Disable dma */
+	if (i2c_dev->use_dma) {
+		stm32f7_i2c_disable_dma_req(i2c_dev);
+		dmaengine_terminate_all(dma->chan_using);
+	}
 
+	i2c_dev->master_mode = false;
 	complete(&i2c_dev->complete);
 
 	return IRQ_HANDLED;
@@ -761,12 +1536,14 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
 {
 	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
 	unsigned long time_left;
 	int ret;
 
 	i2c_dev->msg = msgs;
 	i2c_dev->msg_num = num;
 	i2c_dev->msg_id = 0;
+	f7_msg->smbus = false;
 
 	ret = clk_enable(i2c_dev->clk);
 	if (ret) {
@@ -787,6 +1564,8 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
 	if (!time_left) {
 		dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
 			i2c_dev->msg->addr);
+		if (i2c_dev->use_dma)
+			dmaengine_terminate_all(dma->chan_using);
 		ret = -ETIMEDOUT;
 	}
 
@@ -796,14 +1575,209 @@ clk_free:
 	return (ret < 0) ? ret : num;
 }
 
+static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+				  unsigned short flags, char read_write,
+				  u8 command, int size,
+				  union i2c_smbus_data *data)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adapter);
+	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
+	struct device *dev = i2c_dev->dev;
+	unsigned long timeout;
+	int i, ret;
+
+	f7_msg->addr = addr;
+	f7_msg->size = size;
+	f7_msg->read_write = read_write;
+	f7_msg->smbus = true;
+
+	ret = clk_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	ret = stm32f7_i2c_wait_free_bus(i2c_dev);
+	if (ret)
+		goto clk_free;
+
+	ret = stm32f7_i2c_smbus_xfer_msg(i2c_dev, flags, command, data);
+	if (ret)
+		goto clk_free;
+
+	timeout = wait_for_completion_timeout(&i2c_dev->complete,
+					      i2c_dev->adap.timeout);
+	ret = f7_msg->result;
+	if (ret)
+		goto clk_free;
+
+	if (!timeout) {
+		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
+		if (i2c_dev->use_dma)
+			dmaengine_terminate_all(dma->chan_using);
+		ret = -ETIMEDOUT;
+		goto clk_free;
+	}
+
+	/* Check PEC */
+	if ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && read_write) {
+		ret = stm32f7_i2c_smbus_check_pec(i2c_dev);
+		if (ret)
+			goto clk_free;
+	}
+
+	if (read_write && size != I2C_SMBUS_QUICK) {
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = f7_msg->smbus_buf[0];
+		break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = f7_msg->smbus_buf[0] |
+				(f7_msg->smbus_buf[1] << 8);
+		break;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		for (i = 0; i <= f7_msg->smbus_buf[0]; i++)
+			data->block[i] = f7_msg->smbus_buf[i];
+		break;
+		default:
+			dev_err(dev, "Unsupported smbus transaction\n");
+			ret = -EINVAL;
+		}
+	}
+
+clk_free:
+	clk_disable(i2c_dev->clk);
+	return ret;
+}
+
+static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+	void __iomem *base = i2c_dev->base;
+	struct device *dev = i2c_dev->dev;
+	u32 oar1, oar2, mask;
+	int id, ret;
+
+	if (slave->flags & I2C_CLIENT_PEC) {
+		dev_err(dev, "SMBus PEC not supported in slave mode\n");
+		return -EINVAL;
+	}
+
+	if (stm32f7_i2c_is_slave_busy(i2c_dev)) {
+		dev_err(dev, "Too much slave registered\n");
+		return -EBUSY;
+	}
+
+	ret = stm32f7_i2c_get_free_slave_id(i2c_dev, slave, &id);
+	if (ret)
+		return ret;
+
+	if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) {
+		ret = clk_enable(i2c_dev->clk);
+		if (ret) {
+			dev_err(dev, "Failed to enable clock\n");
+			return ret;
+		}
+	}
+
+	if (id == 0) {
+		/* Configure Own Address 1 */
+		oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
+		oar1 &= ~STM32F7_I2C_OAR1_MASK;
+		if (slave->flags & I2C_CLIENT_TEN) {
+			oar1 |= STM32F7_I2C_OAR1_OA1_10(slave->addr);
+			oar1 |= STM32F7_I2C_OAR1_OA1MODE;
+		} else {
+			oar1 |= STM32F7_I2C_OAR1_OA1_7(slave->addr);
+		}
+		oar1 |= STM32F7_I2C_OAR1_OA1EN;
+		i2c_dev->slave[id] = slave;
+		writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
+	} else if (id == 1) {
+		/* Configure Own Address 2 */
+		oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
+		oar2 &= ~STM32F7_I2C_OAR2_MASK;
+		if (slave->flags & I2C_CLIENT_TEN) {
+			ret = -EOPNOTSUPP;
+			goto exit;
+		}
+
+		oar2 |= STM32F7_I2C_OAR2_OA2_7(slave->addr);
+		oar2 |= STM32F7_I2C_OAR2_OA2EN;
+		i2c_dev->slave[id] = slave;
+		writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
+	} else {
+		ret = -ENODEV;
+		goto exit;
+	}
+
+	/* Enable ACK */
+	stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR2, STM32F7_I2C_CR2_NACK);
+
+	/* Enable Address match interrupt, error interrupt and enable I2C  */
+	mask = STM32F7_I2C_CR1_ADDRIE | STM32F7_I2C_CR1_ERRIE |
+		STM32F7_I2C_CR1_PE;
+	stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+
+	return 0;
+
+exit:
+	if (!(stm32f7_i2c_is_slave_registered(i2c_dev)))
+		clk_disable(i2c_dev->clk);
+
+	return ret;
+}
+
+static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(slave->adapter);
+	void __iomem *base = i2c_dev->base;
+	u32 mask;
+	int id, ret;
+
+	ret = stm32f7_i2c_get_slave_id(i2c_dev, slave, &id);
+	if (ret)
+		return ret;
+
+	WARN_ON(!i2c_dev->slave[id]);
+
+	if (id == 0) {
+		mask = STM32F7_I2C_OAR1_OA1EN;
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
+	} else {
+		mask = STM32F7_I2C_OAR2_OA2EN;
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
+	}
+
+	i2c_dev->slave[id] = NULL;
+
+	if (!(stm32f7_i2c_is_slave_registered(i2c_dev))) {
+		stm32f7_i2c_disable_irq(i2c_dev, STM32F7_I2C_ALL_IRQ_MASK);
+		clk_disable(i2c_dev->clk);
+	}
+
+	return 0;
+}
+
 static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+		I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC;
 }
 
 static struct i2c_algorithm stm32f7_i2c_algo = {
 	.master_xfer = stm32f7_i2c_xfer,
+	.smbus_xfer = stm32f7_i2c_smbus_xfer,
 	.functionality = stm32f7_i2c_func,
+	.reg_slave = stm32f7_i2c_reg_slave,
+	.unreg_slave = stm32f7_i2c_unreg_slave,
 };
 
 static int stm32f7_i2c_probe(struct platform_device *pdev)
@@ -815,6 +1789,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
 	struct i2c_adapter *adap;
 	struct reset_control *rst;
+	dma_addr_t phy_addr;
 	int ret;
 
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
@@ -825,6 +1800,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(i2c_dev->base))
 		return PTR_ERR(i2c_dev->base);
+	phy_addr = (dma_addr_t)res->start;
 
 	irq_event = irq_of_parse_and_map(np, 0);
 	if (!irq_event) {
@@ -871,8 +1847,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->dev = &pdev->dev;
 
-	ret = devm_request_irq(&pdev->dev, irq_event, stm32f7_i2c_isr_event, 0,
-			       pdev->name, i2c_dev);
+	ret = devm_request_threaded_irq(&pdev->dev, irq_event,
+					stm32f7_i2c_isr_event,
+					stm32f7_i2c_isr_event_thread,
+					IRQF_ONESHOT,
+					pdev->name, i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
@@ -924,6 +1903,11 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	init_completion(&i2c_dev->complete);
 
+	/* Init DMA config if supported */
+	i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
+					     STM32F7_I2C_TXDR,
+					     STM32F7_I2C_RXDR);
+
 	ret = i2c_add_adapter(adap);
 	if (ret)
 		goto clk_free;
@@ -946,6 +1930,11 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
+	if (i2c_dev->dma) {
+		stm32_i2c_dma_free(i2c_dev->dma);
+		i2c_dev->dma = NULL;
+	}
+
 	i2c_del_adapter(&i2c_dev->adap);
 
 	clk_unprepare(i2c_dev->clk);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index dc63236b45b2..e866c481bfc3 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -602,20 +602,24 @@ static int stu300_send_address(struct stu300_dev *dev,
 	u32 val;
 	int ret;
 
-	if (msg->flags & I2C_M_TEN)
+	if (msg->flags & I2C_M_TEN) {
 		/* This is probably how 10 bit addresses look */
 		val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) &
 			I2C_DR_D_MASK;
-	else
-		val = ((msg->addr << 1) & I2C_DR_D_MASK);
+		if (msg->flags & I2C_M_RD)
+			/* This is the direction bit */
+			val |= 0x01;
+	} else {
+		val = i2c_8bit_addr_from_msg(msg);
+	}
 
-	if (msg->flags & I2C_M_RD) {
-		/* This is the direction bit */
-		val |= 0x01;
-		if (resend)
+	if (resend) {
+		if (msg->flags & I2C_M_RD)
 			dev_dbg(&dev->pdev->dev, "read resend\n");
-	} else if (resend)
-		dev_dbg(&dev->pdev->dev, "write resend\n");
+		else
+			dev_dbg(&dev->pdev->dev, "write resend\n");
+	}
+
 	stu300_wr8(val, dev->virtbase + I2C_DR);
 
 	/* For 10bit addressing, await 10bit request (EVENT 9) */
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index a021f866d8c2..915f5edbab33 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -509,7 +509,7 @@ static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 
 	dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms);
 
-	for (retry = 0; retry < adap->retries; retry++) {
+	for (retry = 0; retry <= adap->retries; retry++) {
 		ret = synquacer_i2c_doxfer(i2c, msgs, num);
 		if (ret != -EAGAIN)
 			return ret;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 60292d243e24..5fccd1f1bca8 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -173,7 +173,6 @@ struct tegra_i2c_hw_feature {
  * @msg_buf_remaining: size of unsent data in the message buffer
  * @msg_read: identifies read transfers
  * @bus_clk_rate: current i2c bus clock rate
- * @is_suspended: prevents i2c controller accesses after suspend is called
  */
 struct tegra_i2c_dev {
 	struct device *dev;
@@ -194,7 +193,6 @@ struct tegra_i2c_dev {
 	int msg_read;
 	u32 bus_clk_rate;
 	u16 clk_divisor_non_hs_mode;
-	bool is_suspended;
 	bool is_multimaster_mode;
 	spinlock_t xfer_lock;
 };
@@ -734,9 +732,6 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 	int i;
 	int ret = 0;
 
-	if (i2c_dev->is_suspended)
-		return -EBUSY;
-
 	ret = pm_runtime_get_sync(i2c_dev->dev);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
@@ -1051,37 +1046,9 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int tegra_i2c_suspend(struct device *dev)
-{
-	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-
-	i2c_lock_adapter(&i2c_dev->adapter);
-	i2c_dev->is_suspended = true;
-	i2c_unlock_adapter(&i2c_dev->adapter);
-
-	return 0;
-}
-
-static int tegra_i2c_resume(struct device *dev)
-{
-	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-	int ret;
-
-	i2c_lock_adapter(&i2c_dev->adapter);
-
-	ret = tegra_i2c_init(i2c_dev);
-	if (!ret)
-		i2c_dev->is_suspended = false;
-
-	i2c_unlock_adapter(&i2c_dev->adapter);
-
-	return ret;
-}
-
 static const struct dev_pm_ops tegra_i2c_pm = {
 	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
 			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
 };
 #define TEGRA_I2C_PM	(&tegra_i2c_pm)
 #else
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index c80527816ad0..9a71e50d21f1 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -33,7 +33,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
-#include <linux/i2c-xiic.h>
+#include <linux/platform_data/i2c-xiic.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -143,12 +143,6 @@ struct xiic_i2c {
 
 #define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
 
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION  1
-#define XIIC_WRITE_OPERATION 0
-
 /*
  * Tx Fifo upper bit masks.
  */
@@ -415,7 +409,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 		clr |= XIIC_INTR_RX_FULL_MASK;
 		if (!i2c->rx_msg) {
 			dev_dbg(i2c->adap.dev.parent,
-				"%s unexpexted RX IRQ\n", __func__);
+				"%s unexpected RX IRQ\n", __func__);
 			xiic_clear_rx_fifo(i2c);
 			goto out;
 		}
@@ -470,7 +464,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 
 		if (!i2c->tx_msg) {
 			dev_dbg(i2c->adap.dev.parent,
-				"%s unexpexted TX IRQ\n", __func__);
+				"%s unexpected TX IRQ\n", __func__);
 			goto out;
 		}
 
@@ -556,8 +550,7 @@ static void xiic_start_recv(struct xiic_i2c *i2c)
 	if (!(msg->flags & I2C_M_NOSTART))
 		/* write the address */
 		xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
-			(msg->addr << 1) | XIIC_READ_OPERATION |
-			XIIC_TX_DYN_START_MASK);
+			i2c_8bit_addr_from_msg(msg) | XIIC_TX_DYN_START_MASK);
 
 	xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
 
@@ -585,7 +578,7 @@ static void xiic_start_send(struct xiic_i2c *i2c)
 
 	if (!(msg->flags & I2C_M_NOSTART)) {
 		/* write the address */
-		u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+		u16 data = i2c_8bit_addr_from_msg(msg) |
 			XIIC_TX_DYN_START_MASK;
 		if ((i2c->nmsgs == 1) && msg->len == 0)
 			/* no data and last message -> add STOP */
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index eb8913eba0c5..1f41a4f89c08 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -84,6 +85,8 @@ struct xlp9xx_i2c_dev {
 	struct device *dev;
 	struct i2c_adapter adapter;
 	struct completion msg_complete;
+	struct i2c_smbus_alert_setup alert_data;
+	struct i2c_client *ara;
 	int irq;
 	bool msg_read;
 	bool len_recv;
@@ -155,9 +158,30 @@ static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv)
 	priv->msg_buf += len;
 }
 
+static void xlp9xx_i2c_update_rlen(struct xlp9xx_i2c_dev *priv)
+{
+	u32 val, len;
+
+	/*
+	 * Update receive length. Re-read len to get the latest value,
+	 * and then add 4 to have a minimum value that can be safely
+	 * written. This is to account for the byte read above, the
+	 * transfer in progress and any delays in the register I/O
+	 */
+	val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
+	len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
+				  XLP9XX_I2C_FIFO_WCNT_MASK;
+	len = max_t(u32, priv->msg_len, len + 4);
+	if (len >= I2C_SMBUS_BLOCK_MAX + 2)
+		return;
+	val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
+			(len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
+	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
+}
+
 static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
 {
-	u32 len, i, val;
+	u32 len, i;
 	u8 rlen, *buf = priv->msg_buf;
 
 	len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
@@ -167,21 +191,20 @@ static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
 	if (priv->len_recv) {
 		/* read length byte */
 		rlen = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
-		*buf++ = rlen;
-		len--;
-
-		if (priv->client_pec)
-			++rlen;
-		/* update remaining bytes and message length */
-		priv->msg_buf_remaining = rlen;
-		priv->msg_len = rlen + 1;
+		if (rlen > I2C_SMBUS_BLOCK_MAX || rlen == 0) {
+			rlen = 0;	/*abort transfer */
+			priv->msg_buf_remaining = 0;
+			priv->msg_len = 0;
+		} else {
+			*buf++ = rlen;
+			if (priv->client_pec)
+				++rlen; /* account for error check byte */
+			/* update remaining bytes and message length */
+			priv->msg_buf_remaining = rlen;
+			priv->msg_len = rlen + 1;
+		}
+		xlp9xx_i2c_update_rlen(priv);
 		priv->len_recv = false;
-
-		/* Update transfer length to read only actual data */
-		val = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_CTRL);
-		val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
-			((rlen + 1) << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
-		xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
 	} else {
 		len = min(priv->msg_buf_remaining, len);
 		for (i = 0; i < len; i++, buf++)
@@ -300,10 +323,6 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_MFIFOCTRL,
 			     XLP9XX_I2C_MFIFOCTRL_RST);
 
-	/* set FIFO threshold if reading */
-	if (priv->msg_read)
-		xlp9xx_i2c_update_rx_fifo_thres(priv);
-
 	/* set slave addr */
 	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_SLAVEADDR,
 			     (msg->addr << XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT) |
@@ -322,9 +341,13 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 		val &= ~XLP9XX_I2C_CTRL_ADDMODE;
 
 	priv->len_recv = msg->flags & I2C_M_RECV_LEN;
-	len = priv->len_recv ? XLP9XX_I2C_FIFO_SIZE : msg->len;
+	len = priv->len_recv ? I2C_SMBUS_BLOCK_MAX + 2 : msg->len;
 	priv->client_pec = msg->flags & I2C_CLIENT_PEC;
 
+	/* set FIFO threshold if reading */
+	if (priv->msg_read)
+		xlp9xx_i2c_update_rx_fifo_thres(priv);
+
 	/* set data length to be transferred */
 	val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
 	      (len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
@@ -378,8 +401,11 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 	}
 
 	/* update msg->len with actual received length */
-	if (msg->flags & I2C_M_RECV_LEN)
+	if (msg->flags & I2C_M_RECV_LEN) {
+		if (!priv->msg_len)
+			return -EPROTO;
 		msg->len = priv->msg_len;
+	}
 	return 0;
 }
 
@@ -447,6 +473,19 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 	return 0;
 }
 
+static int xlp9xx_i2c_smbus_setup(struct xlp9xx_i2c_dev *priv,
+				  struct platform_device *pdev)
+{
+	if (!priv->alert_data.irq)
+		return -EINVAL;
+
+	priv->ara = i2c_setup_smbus_alert(&priv->adapter, &priv->alert_data);
+	if (!priv->ara)
+		return -ENODEV;
+
+	return 0;
+}
+
 static int xlp9xx_i2c_probe(struct platform_device *pdev)
 {
 	struct xlp9xx_i2c_dev *priv;
@@ -467,6 +506,10 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid irq!\n");
 		return priv->irq;
 	}
+	/* SMBAlert irq */
+	priv->alert_data.irq = platform_get_irq(pdev, 1);
+	if (priv->alert_data.irq <= 0)
+		priv->alert_data.irq = 0;
 
 	xlp9xx_i2c_get_frequency(pdev, priv);
 	xlp9xx_i2c_init(priv);
@@ -493,6 +536,10 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	err = xlp9xx_i2c_smbus_setup(priv, pdev);
+	if (err)
+		dev_dbg(&pdev->dev, "No active SMBus alert %d\n", err);
+
 	platform_set_drvdata(pdev, priv);
 	dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
 
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index a17f46a95f73..31d16ada6e7d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -717,10 +717,6 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->adapter = adap;
 
 	client->dev.platform_data = info->platform_data;
-
-	if (info->archdata)
-		client->dev.archdata = *info->archdata;
-
 	client->flags = info->flags;
 	client->addr = info->addr;
 
@@ -746,7 +742,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
-	client->dev.of_node = info->of_node;
+	client->dev.of_node = of_node_get(info->of_node);
 	client->dev.fwnode = info->fwnode;
 
 	i2c_dev_set_name(adap, client, info);
@@ -757,7 +753,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 			dev_err(&adap->dev,
 				"Failed to add properties to client %s: %d\n",
 				client->name, status);
-			goto out_err;
+			goto out_err_put_of_node;
 		}
 	}
 
@@ -773,6 +769,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 out_free_props:
 	if (info->properties)
 		device_remove_properties(&client->dev);
+out_err_put_of_node:
+	of_node_put(info->of_node);
 out_err:
 	dev_err(&adap->dev,
 		"Failed to register i2c client %s at 0x%02x (%d)\n",
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index c405270a98b4..6cb7ad608bcd 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -22,53 +22,64 @@
 
 #include "i2c-core.h"
 
-static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
-						 struct device_node *node)
+int of_i2c_get_board_info(struct device *dev, struct device_node *node,
+			  struct i2c_board_info *info)
 {
-	struct i2c_client *client;
-	struct i2c_board_info info = {};
-	struct dev_archdata dev_ad = {};
 	u32 addr;
 	int ret;
 
-	dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+	memset(info, 0, sizeof(*info));
 
-	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-		dev_err(&adap->dev, "of_i2c: modalias failure on %pOF\n",
-			node);
-		return ERR_PTR(-EINVAL);
+	if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
+		dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
+		return -EINVAL;
 	}
 
 	ret = of_property_read_u32(node, "reg", &addr);
 	if (ret) {
-		dev_err(&adap->dev, "of_i2c: invalid reg on %pOF\n", node);
-		return ERR_PTR(ret);
+		dev_err(dev, "of_i2c: invalid reg on %pOF\n", node);
+		return ret;
 	}
 
 	if (addr & I2C_TEN_BIT_ADDRESS) {
 		addr &= ~I2C_TEN_BIT_ADDRESS;
-		info.flags |= I2C_CLIENT_TEN;
+		info->flags |= I2C_CLIENT_TEN;
 	}
 
 	if (addr & I2C_OWN_SLAVE_ADDRESS) {
 		addr &= ~I2C_OWN_SLAVE_ADDRESS;
-		info.flags |= I2C_CLIENT_SLAVE;
+		info->flags |= I2C_CLIENT_SLAVE;
 	}
 
-	info.addr = addr;
-	info.archdata = &dev_ad;
-	info.of_node = of_node_get(node);
+	info->addr = addr;
+	info->of_node = node;
 
 	if (of_property_read_bool(node, "host-notify"))
-		info.flags |= I2C_CLIENT_HOST_NOTIFY;
+		info->flags |= I2C_CLIENT_HOST_NOTIFY;
 
 	if (of_get_property(node, "wakeup-source", NULL))
-		info.flags |= I2C_CLIENT_WAKE;
+		info->flags |= I2C_CLIENT_WAKE;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_i2c_get_board_info);
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+						 struct device_node *node)
+{
+	struct i2c_client *client;
+	struct i2c_board_info info;
+	int ret;
+
+	dev_dbg(&adap->dev, "of_i2c: register %pOF\n", node);
+
+	ret = of_i2c_get_board_info(&adap->dev, node, &info);
+	if (ret)
+		return ERR_PTR(ret);
 
 	client = i2c_new_device(adap, &info);
 	if (!client) {
 		dev_err(&adap->dev, "of_i2c: Failure registering %pOF\n", node);
-		of_node_put(node);
 		return ERR_PTR(-EINVAL);
 	}
 	return client;
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index b5aec33002c3..f3f683041e7f 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -466,6 +466,8 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
 	status = i2c_transfer(adapter, msg, num);
 	if (status < 0)
 		return status;
+	if (status != num)
+		return -EIO;
 
 	/* Check PEC if last message is a read */
 	if (i && (msg[num-1].flags & I2C_M_RD)) {
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 9669ca4937b8..300ab4b672e4 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -418,7 +418,7 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 	snprintf(symlink_name, sizeof(symlink_name), "channel-%u", chan_id);
 	WARN(sysfs_create_link(&muxc->dev->kobj, &priv->adap.dev.kobj,
 			       symlink_name),
-	     "can't create symlink for channel %u\n", chan_id);
+	     "can't create symlink to channel %u\n", chan_id);
 	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
 		 i2c_adapter_id(&priv->adap));
 
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index 33ce032cb701..035032e20327 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
@@ -105,7 +106,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
 	priv->cur_adap.owner = THIS_MODULE;
 	priv->cur_adap.algo = &priv->algo;
 	priv->cur_adap.algo_data = priv;
-	priv->cur_adap.dev.parent = priv->dev;
+	priv->cur_adap.dev.parent = &adap->dev;
 	priv->cur_adap.class = adap->class;
 	priv->cur_adap.retries = adap->retries;
 	priv->cur_adap.timeout = adap->timeout;
@@ -254,6 +255,8 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	pm_runtime_no_callbacks(&pdev->dev);
+
 	/* switch to first parent as active master */
 	i2c_demux_activate_master(priv, 0);
 
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index ddc4bd4ca13b..401308e3d036 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -10,7 +10,7 @@
 
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-#include <linux/i2c-mux-gpio.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/i2c/muxes/i2c-mux-ltc4306.c b/drivers/i2c/muxes/i2c-mux-ltc4306.c
index 311b1cced0c0..a9af93259b19 100644
--- a/drivers/i2c/muxes/i2c-mux-ltc4306.c
+++ b/drivers/i2c/muxes/i2c-mux-ltc4306.c
@@ -206,8 +206,7 @@ static const struct of_device_id ltc4306_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ltc4306_of_match);
 
-static int ltc4306_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int ltc4306_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
 	const struct chip_desc *chip;
@@ -221,7 +220,7 @@ static int ltc4306_probe(struct i2c_client *client,
 	chip = of_device_get_match_data(&client->dev);
 
 	if (!chip)
-		chip = &chips[id->driver_data];
+		chip = &chips[i2c_match_id(ltc4306_id, client)->driver_data];
 
 	idle_disc = device_property_read_bool(&client->dev,
 					      "i2c-mux-idle-disconnect");
@@ -310,7 +309,7 @@ static struct i2c_driver ltc4306_driver = {
 		.name	= "ltc4306",
 		.of_match_table = of_match_ptr(ltc4306_of_match),
 	},
-	.probe		= ltc4306_probe,
+	.probe_new	= ltc4306_probe,
 	.remove		= ltc4306_remove,
 	.id_table	= ltc4306_id,
 };
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 09bafd3e68fa..fbc748027087 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -36,6 +36,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
@@ -373,7 +374,6 @@ static int pca954x_probe(struct i2c_client *client,
 	int num, force, class;
 	struct i2c_mux_core *muxc;
 	struct pca954x *data;
-	const struct of_device_id *match;
 	int ret;
 
 	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
@@ -389,15 +389,19 @@ static int pca954x_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, muxc);
 	data->client = client;
 
-	/* Get the mux out of reset if a reset GPIO is specified. */
-	gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW);
+	/* Reset the mux if a reset GPIO is specified. */
+	gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
+	if (gpio) {
+		udelay(1);
+		gpiod_set_value_cansleep(gpio, 0);
+		/* Give the chip some time to recover. */
+		udelay(1);
+	}
 
-	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
-	if (match)
-		data->chip = of_device_get_match_data(&client->dev);
-	else
+	data->chip = of_device_get_match_data(&client->dev);
+	if (!data->chip)
 		data->chip = &chips[id->driver_data];
 
 	if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) {
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index f583f805fee9..5653295b01cd 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -127,10 +127,8 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
 	values = devm_kcalloc(&pdev->dev,
 			      mux->data.n_values, sizeof(*mux->data.values),
 			      GFP_KERNEL);
-	if (!values) {
-		dev_err(&pdev->dev, "Cannot allocate values array");
+	if (!values)
 		return -ENOMEM;
-	}
 
 	for_each_child_of_node(np, child) {
 		of_property_read_u32(child, "reg", values + i);
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 3cf300072348..6d9f0abb2660 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 55d19fd0994e..2a87b0d2f21f 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -19,7 +19,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
-#include <linux/i2c-gpio.h>
+#include <linux/platform_data/i2c-gpio.h>
 #include <linux/gpio/machine.h>
 #include <linux/slab.h>
 
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 05ecf828b2ab..436e34705af1 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -30,8 +30,8 @@
 #include <linux/timb_gpio.h>
 
 #include <linux/i2c.h>
-#include <linux/i2c-ocores.h>
-#include <linux/i2c-xiic.h>
+#include <linux/platform_data/i2c-ocores.h>
+#include <linux/platform_data/i2c-xiic.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/xilinx_spi.h>
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 33053b0d1fdf..f5cc517d1131 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -532,6 +532,45 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata)
 	return 0;
 }
 
+static void at24_remove_dummy_clients(struct at24_data *at24)
+{
+	int i;
+
+	for (i = 1; i < at24->num_addresses; i++)
+		i2c_unregister_device(at24->client[i].client);
+}
+
+static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
+				  struct regmap_config *regmap_config)
+{
+	struct i2c_client *base_client, *dummy_client;
+	unsigned short int addr;
+	struct regmap *regmap;
+	struct device *dev;
+
+	base_client = at24->client[0].client;
+	dev = &base_client->dev;
+	addr = base_client->addr + index;
+
+	dummy_client = i2c_new_dummy(base_client->adapter,
+				     base_client->addr + index);
+	if (!dummy_client) {
+		dev_err(dev, "address 0x%02x unavailable\n", addr);
+		return -EADDRINUSE;
+	}
+
+	regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
+	if (IS_ERR(regmap)) {
+		i2c_unregister_device(dummy_client);
+		return PTR_ERR(regmap);
+	}
+
+	at24->client[index].client = dummy_client;
+	at24->client[index].regmap = regmap;
+
+	return 0;
+}
+
 static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
 {
 	if (flags & AT24_FLAG_MAC) {
@@ -637,20 +676,10 @@ static int at24_probe(struct i2c_client *client)
 
 	/* use dummy devices for multiple-address chips */
 	for (i = 1; i < num_addresses; i++) {
-		at24->client[i].client = i2c_new_dummy(client->adapter,
-						       client->addr + i);
-		if (!at24->client[i].client) {
-			dev_err(dev, "address 0x%02x unavailable\n",
-				client->addr + i);
-			err = -EADDRINUSE;
-			goto err_clients;
-		}
-		at24->client[i].regmap = devm_regmap_init_i2c(
-						at24->client[i].client,
-						&regmap_config);
-		if (IS_ERR(at24->client[i].regmap)) {
-			err = PTR_ERR(at24->client[i].regmap);
-			goto err_clients;
+		err = at24_make_dummy_client(at24, i, &regmap_config);
+		if (err) {
+			at24_remove_dummy_clients(at24);
+			return err;
 		}
 	}
 
@@ -685,7 +714,7 @@ static int at24_probe(struct i2c_client *client)
 	nvmem_config.word_size = 1;
 	nvmem_config.size = pdata.byte_len;
 
-	at24->nvmem = nvmem_register(&nvmem_config);
+	at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
 	if (IS_ERR(at24->nvmem)) {
 		err = PTR_ERR(at24->nvmem);
 		goto err_clients;
@@ -702,10 +731,7 @@ static int at24_probe(struct i2c_client *client)
 	return 0;
 
 err_clients:
-	for (i = 1; i < num_addresses; i++)
-		if (at24->client[i].client)
-			i2c_unregister_device(at24->client[i].client);
-
+	at24_remove_dummy_clients(at24);
 	pm_runtime_disable(dev);
 
 	return err;
@@ -714,15 +740,10 @@ err_clients:
 static int at24_remove(struct i2c_client *client)
 {
 	struct at24_data *at24;
-	int i;
 
 	at24 = i2c_get_clientdata(client);
 
-	nvmem_unregister(at24->nvmem);
-
-	for (i = 1; i < at24->num_addresses; i++)
-		i2c_unregister_device(at24->client[i].client);
-
+	at24_remove_dummy_clients(at24);
 	pm_runtime_disable(&client->dev);
 	pm_runtime_set_suspended(&client->dev);
 
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
deleted file mode 100644
index 5388326fbbff..000000000000
--- a/include/linux/i2c-pnx.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Header file for I2C support on PNX010x/4008.
- *
- * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
- *
- * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __I2C_PNX_H__
-#define __I2C_PNX_H__
-
-struct platform_device;
-struct clk;
-
-struct i2c_pnx_mif {
-	int			ret;		/* Return value */
-	int			mode;		/* Interface mode */
-	struct completion	complete;	/* I/O completion */
-	struct timer_list	timer;		/* Timeout */
-	u8 *			buf;		/* Data buffer */
-	int			len;		/* Length of data buffer */
-	int			order;		/* RX Bytes to order via TX */
-};
-
-struct i2c_pnx_algo_data {
-	void __iomem		*ioaddr;
-	struct i2c_pnx_mif	mif;
-	int			last;
-	struct clk		*clk;
-	struct i2c_adapter	adapter;
-	int			irq;
-	u32			timeout;
-};
-
-#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 44ad14e016b5..254cd34eeae2 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -394,7 +394,6 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
  * @addr: stored in i2c_client.addr
  * @dev_name: Overrides the default <busnr>-<addr> dev_name if set
  * @platform_data: stored in i2c_client.dev.platform_data
- * @archdata: copied into i2c_client.dev.archdata
  * @of_node: pointer to OpenFirmware device node
  * @fwnode: device node supplied by the platform firmware
  * @properties: additional device properties for the device
@@ -419,7 +418,6 @@ struct i2c_board_info {
 	unsigned short	addr;
 	const char	*dev_name;
 	void		*platform_data;
-	struct dev_archdata	*archdata;
 	struct device_node *of_node;
 	struct fwnode_handle *fwnode;
 	const struct property_entry *properties;
@@ -903,6 +901,9 @@ extern const struct of_device_id
 *i2c_of_match_device(const struct of_device_id *matches,
 		     struct i2c_client *client);
 
+int of_i2c_get_board_info(struct device *dev, struct device_node *node,
+			  struct i2c_board_info *info);
+
 #else
 
 static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
@@ -927,6 +928,13 @@ static inline const struct of_device_id
 	return NULL;
 }
 
+static inline int of_i2c_get_board_info(struct device *dev,
+					struct device_node *node,
+					struct i2c_board_info *info)
+{
+	return -ENOTSUPP;
+}
+
 #endif /* CONFIG_OF */
 
 #if IS_ENABLED(CONFIG_ACPI)
diff --git a/include/linux/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h
index 352c1426fd4d..352c1426fd4d 100644
--- a/include/linux/i2c-gpio.h
+++ b/include/linux/platform_data/i2c-gpio.h
diff --git a/include/linux/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h
index 4406108201fe..4406108201fe 100644
--- a/include/linux/i2c-mux-gpio.h
+++ b/include/linux/platform_data/i2c-mux-gpio.h
diff --git a/include/linux/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h
index 01edd96fe1f7..01edd96fe1f7 100644
--- a/include/linux/i2c-ocores.h
+++ b/include/linux/platform_data/i2c-ocores.h
diff --git a/include/linux/i2c-omap.h b/include/linux/platform_data/i2c-omap.h
index 3444265ee8ee..3444265ee8ee 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/platform_data/i2c-omap.h
diff --git a/include/linux/i2c-pca-platform.h b/include/linux/platform_data/i2c-pca-platform.h
index c37329432a8e..c37329432a8e 100644
--- a/include/linux/i2c-pca-platform.h
+++ b/include/linux/platform_data/i2c-pca-platform.h
diff --git a/include/linux/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h
index 4f9f2256a97e..4f9f2256a97e 100644
--- a/include/linux/i2c-xiic.h
+++ b/include/linux/platform_data/i2c-xiic.h