Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu arch updates from Greg Ungerer:
 "Includes a cleanup of the non-MMU linker script (it now almost
  exclusively uses the well defined linker script support macros and
  definitions).  Some more merging of MMU and non-MMU common files
  (specifically the arch process.c, ptrace and time.c).  And a big
  cleanup of the massively duplicated ColdFire device definition code.

  Overall we remove about 2000 lines of code, and end up with a single
  set of platform device definitions for the serial ports, ethernet
  ports and QSPI ports common in most ColdFire SoCs.

  I expect you will get a merge conflict on arch/m68k/kernel/process.c,
  in cpu_idle().  It should be relatively strait forward to fixup."

And cpu_idle() conflict resolution was indeed trivial (merging the
nommu/mmu versions of process.c trivially conflicting with the
conversion to use the schedule_preempt_disabled() helper function)

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits)
  m68knommu: factor more common ColdFire cpu reset code
  m68knommu: make 528x CPU reset register addressing consistent
  m68knommu: make 527x CPU reset register addressing consistent
  m68knommu: make 523x CPU reset register addressing consistent
  m68knommu: factor some common ColdFire cpu reset code
  m68knommu: move old ColdFire timers init from CPU init to timers code
  m68knommu: clean up init code in ColdFire 532x startup
  m68knommu: clean up init code in ColdFire 528x startup
  m68knommu: clean up init code in ColdFire 523x startup
  m68knommu: merge common ColdFire QSPI platform setup code
  m68knommu: make 532x QSPI platform addressing consistent
  m68knommu: make 528x QSPI platform addressing consistent
  m68knommu: make 527x QSPI platform addressing consistent
  m68knommu: make 5249 QSPI platform addressing consistent
  m68knommu: make 523x QSPI platform addressing consistent
  m68knommu: make 520x QSPI platform addressing consistent
  m68knommu: merge common ColdFire FEC platform setup code
  m68knommu: make 532x FEC platform addressing consistent
  m68knommu: make 528x FEC platform addressing consistent
  m68knommu: make 527x FEC platform addressing consistent
  ...

52 files changed, 1591 insertions, 3637 deletions

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index ae413d4a8bb7..d318c606c888 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -7,6 +7,7 @@ config M68K
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select FPU if MMU
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -24,9 +25,6 @@ config ARCH_HAS_ILOG2_U64
 config GENERIC_CLOCKEVENTS
 	bool
 
-config GENERIC_CMOS_UPDATE
-	def_bool !MMU
-
 config GENERIC_GPIO
 	bool
 
@@ -67,6 +65,9 @@ config CPU_HAS_NO_MULDIV64
 config CPU_HAS_ADDRESS_SPACES
 	bool
 
+config FPU
+	bool
+
 config HZ
 	int
 	default 1000 if CLEOPATRA
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 9015eadd5c00..69722366b084 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -100,11 +100,11 @@
 #define	MCFDMA_BASE1		(MCF_MBAR + 0x240)	/* Base address DMA 1 */
 
 #if defined(CONFIG_NETtel)
-#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#define	MCFUART_BASE0		(MCF_MBAR + 0x180)	/* Base address UART0 */
+#define	MCFUART_BASE1		(MCF_MBAR + 0x140)	/* Base address UART1 */
 #else
-#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#define	MCFUART_BASE0		(MCF_MBAR + 0x140)	/* Base address UART0 */
+#define	MCFUART_BASE1		(MCF_MBAR + 0x180)	/* Base address UART1 */
 #endif
 
 /*
@@ -112,6 +112,8 @@
  */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
 
 /*
  *	Generic GPIO
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index eda62de7e607..17f2aab9cf97 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -48,8 +48,21 @@
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_FECRX0	    36		/* Interrupt number for FEC RX */
+#define MCFINT_FECTX0	    40		/* Interrupt number for FEC RX */
+#define MCFINT_FECENTC0	    42		/* Interrupt number for FEC RX */
 #define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
 
+#define MCF_IRQ_UART0	    (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1	    (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2	    (MCFINT_VECBASE + MCFINT_UART2)
+
+#define MCF_IRQ_FECRX0	    (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
+
+#define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
+
 /*
  *  SDRAM configuration registers.
  */
@@ -144,15 +157,25 @@
 /*
  *  UART module.
  */
-#define MCFUART_BASE1		0xFC060000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xFC064000	/* Base address of UART2 */
-#define MCFUART_BASE3		0xFC068000	/* Base address of UART2 */
+#define MCFUART_BASE0		0xFC060000	/* Base address of UART0 */
+#define MCFUART_BASE1		0xFC064000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xFC068000	/* Base address of UART2 */
 
 /*
  *  FEC module.
  */
-#define	MCFFEC_BASE		0xFC030000	/* Base of FEC ethernet */
-#define	MCFFEC_SIZE		0x800		/* Register set size */
+#define	MCFFEC_BASE0		0xFC030000	/* Base of FEC ethernet */
+#define	MCFFEC_SIZE0		0x800		/* Register set size */
+
+/*
+ *  QSPI module.
+ */
+#define	MCFQSPI_BASE		0xFC05C000	/* Base of QSPI module */
+#define	MCFQSPI_SIZE		0x40		/* Register set size */
+
+#define	MCFQSPI_CS0		46
+#define	MCFQSPI_CS1		47
+#define	MCFQSPI_CS2		27
 
 /*
  *  Reset Control Unit.
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 6235921eca4e..075062d4eecd 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -35,8 +35,23 @@
 
 #define	MCFINT_VECBASE		64		/* Vector base number */
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
 #define MCFINT_QSPI		18		/* Interrupt number for QSPI */
+#define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
+#define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
+#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+
+#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
+#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
+#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
+
+#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
+#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
+#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
+
+#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
 
 /*
  *	SDRAM configuration registers.
@@ -50,8 +65,8 @@
 /*
  *  Reset Control Unit (relative to IPSBAR).
  */
-#define	MCF_RCR			0x110000
-#define	MCF_RSR			0x110001
+#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
+#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
 
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
@@ -59,15 +74,26 @@
 /*
  *  UART module.
  */
-#define MCFUART_BASE1		(MCF_IPSBAR + 0x200)
-#define MCFUART_BASE2		(MCF_IPSBAR + 0x240)
-#define MCFUART_BASE3		(MCF_IPSBAR + 0x280)
+#define MCFUART_BASE0		(MCF_IPSBAR + 0x200)
+#define MCFUART_BASE1		(MCF_IPSBAR + 0x240)
+#define MCFUART_BASE2		(MCF_IPSBAR + 0x280)
 
 /*
  *  FEC ethernet module.
  */
-#define	MCFFEC_BASE		(MCF_IPSBAR + 0x1000)
-#define	MCFFEC_SIZE		0x800
+#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x1000)
+#define	MCFFEC_SIZE0		0x800
+
+/*
+ *  QSPI module.
+ */
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_SIZE		0x40
+
+#define	MCFQSPI_CS0		91
+#define	MCFQSPI_CS1		92
+#define	MCFQSPI_CS2		103
+#define	MCFQSPI_CS3		99
 
 /*
  *  GPIO module.
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 805714ca8d7d..7f0c2c3660fd 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -76,8 +76,19 @@
 /*
  *	UART module.
  */
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
+
+/*
+ *	QSPI module.
+ */
+#define	MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
+#define	MCFQSPI_SIZE		0x40			/* Register set size */
+
+#define	MCFQSPI_CS0		29
+#define	MCFQSPI_CS1		24
+#define	MCFQSPI_CS2		21
+#define	MCFQSPI_CS3		22
 
 /*
  *	DMA unit base addresses.
@@ -108,6 +119,9 @@
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
+
 /*
  *	General purpose IO registers (in MBAR2).
  */
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 759c2b07a994..a58f1760d858 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -68,8 +68,8 @@
 #define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
 #define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
 
-#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
-#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#define	MCFUART_BASE0		(MCF_MBAR + 0x100) /* Base address UART0 */
+#define	MCFUART_BASE1		(MCF_MBAR + 0x140) /* Base address UART1 */
 
 #define	MCFSIM_PACNT		(MCF_MBAR + 0x80) /* Port A Control (r/w) */
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x84) /* Port A Direction (r/w) */
@@ -88,6 +88,9 @@
 #define	MCFTIMER_BASE3		(MCF_MBAR + 0x240) /* Base address TIMER4 */
 #define	MCFTIMER_BASE4		(MCF_MBAR + 0x260) /* Base address TIMER3 */
 
+#define	MCFFEC_BASE0		(MCF_MBAR + 0x840) /* Base FEC ethernet */
+#define	MCFFEC_SIZE0		0x1d0
+
 /*
  *	Define system peripheral IRQ usage.
  */
@@ -101,8 +104,8 @@
 #define	MCF_IRQ_TIMER2		70		/* Timer 2 */
 #define	MCF_IRQ_TIMER3		71		/* Timer 3 */
 #define	MCF_IRQ_TIMER4		72		/* Timer 4 */
-#define	MCF_IRQ_UART1		73		/* UART 1 */
-#define	MCF_IRQ_UART2		74		/* UART 2 */
+#define	MCF_IRQ_UART0		73		/* UART 0 */
+#define	MCF_IRQ_UART1		74		/* UART 1 */
 #define	MCF_IRQ_PLIP		75		/* PLIC 2Khz Periodic */
 #define	MCF_IRQ_PLIA		76		/* PLIC Asynchronous */
 #define	MCF_IRQ_USB0		77		/* USB Endpoint 0 */
@@ -114,9 +117,9 @@
 #define	MCF_IRQ_USB6		83		/* USB Endpoint 6 */
 #define	MCF_IRQ_USB7		84		/* USB Endpoint 7 */
 #define	MCF_IRQ_DMA		85		/* DMA Controller */
-#define	MCF_IRQ_ERX		86		/* Ethernet Receiver */
-#define	MCF_IRQ_ETX		87		/* Ethernet Transmitter */
-#define	MCF_IRQ_ENTC		88		/* Ethernet Non-Time Critical */
+#define	MCF_IRQ_FECRX0		86		/* Ethernet Receiver */
+#define	MCF_IRQ_FECTX0		87		/* Ethernet Transmitter */
+#define	MCF_IRQ_FECENTC0	88		/* Ethernet Non-Time Critical */
 #define	MCF_IRQ_QSPI		89		/* Queued Serial Interface */
 #define	MCF_IRQ_EINT5		90		/* External Interrupt 5 */
 #define	MCF_IRQ_EINT6		91		/* External Interrupt 6 */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 758810ef91ec..83db8106f50a 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -38,8 +38,29 @@
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
+#define	MCFINT_FECRX0		23		/* Interrupt number for FEC0 */
+#define	MCFINT_FECTX0		27		/* Interrupt number for FEC0 */
+#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC0 */
 #define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
 
+#define	MCFINT2_VECBASE		128		/* Vector base number 2 */
+#define	MCFINT2_FECRX1		23		/* Interrupt number for FEC1 */
+#define	MCFINT2_FECTX1		27		/* Interrupt number for FEC1 */
+#define	MCFINT2_FECENTC1	29		/* Interrupt number for FEC1 */
+
+#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
+#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
+#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
+
+#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
+#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
+#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
+#define	MCF_IRQ_FECRX1		(MCFINT2_VECBASE + MCFINT2_FECRX1)
+#define	MCF_IRQ_FECTX1		(MCFINT2_VECBASE + MCFINT2_FECTX1)
+#define	MCF_IRQ_FECENTC1	(MCFINT2_VECBASE + MCFINT2_FECENTC1)
+
+#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
+
 /*
  *	SDRAM configuration registers.
  */
@@ -72,9 +93,9 @@
 /*
  *	UART module.
  */
-#define MCFUART_BASE1		(MCF_IPSBAR + 0x200)
-#define MCFUART_BASE2		(MCF_IPSBAR + 0x240)
-#define MCFUART_BASE3		(MCF_IPSBAR + 0x280)
+#define MCFUART_BASE0		(MCF_IPSBAR + 0x200)
+#define MCFUART_BASE1		(MCF_IPSBAR + 0x240)
+#define MCFUART_BASE2		(MCF_IPSBAR + 0x280)
 
 /*
  *	FEC ethernet module.
@@ -84,6 +105,28 @@
 #define	MCFFEC_BASE1		(MCF_IPSBAR + 0x1800)
 #define	MCFFEC_SIZE1		0x800
 
+/*
+ *	QSPI module.
+ */
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_SIZE		0x40
+
+#ifdef CONFIG_M5271
+#define	MCFQSPI_CS0		91
+#define	MCFQSPI_CS1		92
+#define	MCFQSPI_CS2		99
+#define	MCFQSPI_CS3		103
+#endif
+#ifdef CONFIG_M5275
+#define	MCFQSPI_CS0		59
+#define	MCFQSPI_CS1		60
+#define	MCFQSPI_CS2		61
+#define	MCFQSPI_CS3		62
+#endif
+
+/*
+ *	GPIO module.
+ */
 #ifdef CONFIG_M5271
 #define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
 #define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
@@ -285,8 +328,8 @@
 /*
  *  Reset Control Unit (relative to IPSBAR).
  */
-#define	MCF_RCR			0x110000
-#define	MCF_RSR			0x110001
+#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
+#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
 
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d798bd5df56c..569476fba18c 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -35,9 +35,24 @@
 
 #define	MCFINT_VECBASE		64		/* Vector base number */
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
+#define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
+#define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
+#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
 #define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
 
+#define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
+#define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
+#define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
+
+#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
+#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
+#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
+
+#define	MCF_IRQ_QSPI		(MCFINT_VECBASE + MCFINT_QSPI)
+
 /*
  *	SDRAM configuration registers.
  */
@@ -58,15 +73,26 @@
 /*
  *	UART module.
  */
-#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000200)
-#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000240)
-#define	MCFUART_BASE3		(MCF_IPSBAR + 0x00000280)
+#define	MCFUART_BASE0		(MCF_IPSBAR + 0x00000200)
+#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000240)
+#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000280)
 
 /*
  *	FEC ethernet module.
  */
-#define	MCFFEC_BASE		(MCF_IPSBAR + 0x00001000)
-#define	MCFFEC_SIZE		0x800
+#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x00001000)
+#define	MCFFEC_SIZE0		0x800
+
+/*
+ *	QSPI module.
+ */
+#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_SIZE		0x40
+
+#define	MCFQSPI_CS0		147
+#define	MCFQSPI_CS1		148
+#define	MCFQSPI_CS2		149
+#define	MCFQSPI_CS3		150
 
 /*
  * 	GPIO registers
@@ -246,8 +272,8 @@
 /*
  *  Reset Control Unit (relative to IPSBAR).
  */
-#define	MCF_RCR			0x110000
-#define	MCF_RSR			0x110001
+#define	MCF_RCR			(MCF_IPSBAR + 0x110000)
+#define	MCF_RSR			(MCF_IPSBAR + 0x110001)
 
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 8f8609fcc9b8..3bc3adaa7ee0 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -117,11 +117,11 @@
  *  UART module.
  */
 #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x200)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x1c0)	/* Base address UART1 */
 #else
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
 #endif
 
 /*
@@ -176,6 +176,8 @@
  */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
 
 /****************************************************************************/
 #endif	/* m5307sim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index ba4cc784f574..29b66e21413a 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -24,6 +24,19 @@
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_FECRX0	    36		/* Interrupt number for FEC */
+#define MCFINT_FECTX0	    40		/* Interrupt number for FEC */
+#define MCFINT_FECENTC0	    42		/* Interrupt number for FEC */
+
+#define MCF_IRQ_UART0       (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1       (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2       (MCFINT_VECBASE + MCFINT_UART2)
+
+#define MCF_IRQ_FECRX0	    (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
+
+#define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
 
 #define MCF_WTM_WCR	MCF_REG16(0xFC098000)
 
@@ -82,9 +95,25 @@
 /*
  *  UART module.
  */
-#define MCFUART_BASE1		0xFC060000	/* Base address of UART1 */
-#define MCFUART_BASE2		0xFC064000	/* Base address of UART2 */
-#define MCFUART_BASE3		0xFC068000	/* Base address of UART3 */
+#define MCFUART_BASE0		0xFC060000	/* Base address of UART1 */
+#define MCFUART_BASE1		0xFC064000	/* Base address of UART2 */
+#define MCFUART_BASE2		0xFC068000	/* Base address of UART3 */
+
+/*
+ *  FEC module.
+ */
+#define	MCFFEC_BASE0		0xFC030000	/* Base address of FEC0 */
+#define	MCFFEC_SIZE0		0x800		/* Size of FEC0 region */
+
+/*
+ *  QSPI module.
+ */
+#define	MCFQSPI_BASE		0xFC058000	/* Base address of QSPI */
+#define	MCFQSPI_SIZE		0x40		/* Size of QSPI region */
+
+#define	MCFQSPI_CS0		84
+#define	MCFQSPI_CS1		85
+#define	MCFQSPI_CS2		86
 
 /*
  *  Timer module.
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 51e00b00b8a6..79f58dd6a83d 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -85,8 +85,8 @@
 #define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
 #define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
 
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
 
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
@@ -139,6 +139,8 @@
  */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
 
 /****************************************************************************/
 #endif	/* m5407sim_h */
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index 1ed8bfb02772..ae56b8848a9d 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -31,16 +31,20 @@
 /*
  *	UART module.
  */
-#define MCFUART_BASE1		0x8600		/* Base address of UART1 */
-#define MCFUART_BASE2		0x8700		/* Base address of UART2 */
-#define MCFUART_BASE3		0x8800		/* Base address of UART3 */
-#define MCFUART_BASE4		0x8900		/* Base address of UART4 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x8600)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x8700)	/* Base address UART1 */
+#define MCFUART_BASE2		(MCF_MBAR + 0x8800)	/* Base address UART2 */
+#define MCFUART_BASE3		(MCF_MBAR + 0x8900)	/* Base address UART3 */
 
 /*
  *	Define system peripheral IRQ usage.
  */
-#define MCF_IRQ_TIMER		(64 + 54)	/* Slice Timer 0 */
-#define MCF_IRQ_PROFILER	(64 + 53)	/* Slice Timer 1 */
+#define MCF_IRQ_TIMER		(MCFINT_VECBASE + 54)	/* Slice Timer 0 */
+#define MCF_IRQ_PROFILER	(MCFINT_VECBASE + 53)	/* Slice Timer 1 */
+#define MCF_IRQ_UART0		(MCFINT_VECBASE + 35)
+#define MCF_IRQ_UART1		(MCFINT_VECBASE + 34)
+#define MCF_IRQ_UART2		(MCFINT_VECBASE + 33)
+#define MCF_IRQ_UART3		(MCFINT_VECBASE + 32)
 
 /*
  *	Generic GPIO support
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 789f3b2de0e9..825c1c813196 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void);
 extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
 extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
 extern int (*mach_set_clock_mmss)(unsigned long);
-extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
-			    int *min, int *sec);
 extern void (*mach_reset)( void );
 extern void (*mach_halt)( void );
 extern void (*mach_power_off)( void );
@@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int);
 extern void (*mach_beep) (unsigned int, unsigned int);
 
 /* Hardware clock functions */
-extern void hw_timer_init(void);
+extern void hw_timer_init(irq_handler_t handler);
 extern unsigned long hw_timer_offset(void);
-extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
 
 extern void config_BSP(char *command, int len);
 
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
index 7fe631972f1f..7b51416ccae2 100644
--- a/arch/m68k/include/asm/mcfqspi.h
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -21,17 +21,6 @@
 #ifndef mcfqspi_h
 #define mcfqspi_h
 
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
-#elif defined(CONFIG_M5249)
-#define MCFQSPI_IOBASE         (MCF_MBAR + 0x300)
-#elif defined(CONFIG_M520x)
-#define MCFQSPI_IOBASE         0xFC05C000
-#elif defined(CONFIG_M532x)
-#define MCFQSPI_IOBASE         0xFC058000
-#endif
-#define MCFQSPI_IOSIZE		0x40
-
 /**
  * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
  * @setup: setup the control; allocate gpio's, etc. May be NULL.
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index 2abedff0a694..2d3bc774b3c5 100644
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -41,7 +41,10 @@ struct mcf_platform_uart {
 #define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
 #define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
 #define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
-#else
+#endif
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+        defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
+        defined(CONFIG_M5407)
 #define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
 #endif
 #define	MCFUART_UIPR		0x34		/* Input Port (r) */
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 6cf4bd6e34f8..c54ef927e483 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -1,5 +1,378 @@
+/*
+ *  linux/arch/m68k/kernel/process.c
+ *
+ *  Copyright (C) 1995  Hamish Macdonald
+ *
+ *  68060 fixes by Jesper Skov
+ */
+
+/*
+ * This file handles the architecture-dependent parts of process handling..
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/reboot.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/pgtable.h>
+
+
+asmlinkage void ret_from_fork(void);
+
+
+/*
+ * Return saved PC from a blocked thread
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
+	/* Check whether the thread is blocked in resume() */
+	if (in_sched_functions(sw->retpc))
+		return ((unsigned long *)sw->a6)[1];
+	else
+		return sw->retpc;
+}
+
+/*
+ * The idle loop on an m68k..
+ */
+static void default_idle(void)
+{
+	if (!need_resched())
+#if defined(MACH_ATARI_ONLY)
+		/* block out HSYNC on the atari (falcon) */
+		__asm__("stop #0x2200" : : : "cc");
+#else
+		__asm__("stop #0x2000" : : : "cc");
+#endif
+}
+
+void (*idle)(void) = default_idle;
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched())
+			idle();
+		schedule_preempt_disabled();
+	}
+}
+
+void machine_restart(char * __unused)
+{
+	if (mach_reset)
+		mach_reset();
+	for (;;);
+}
+
+void machine_halt(void)
+{
+	if (mach_halt)
+		mach_halt();
+	for (;;);
+}
+
+void machine_power_off(void)
+{
+	if (mach_power_off)
+		mach_power_off();
+	for (;;);
+}
+
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
+void show_regs(struct pt_regs * regs)
+{
+	printk("\n");
+	printk("Format %02x  Vector: %04x  PC: %08lx  Status: %04x    %s\n",
+	       regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
+	printk("ORIG_D0: %08lx  D0: %08lx  A2: %08lx  A1: %08lx\n",
+	       regs->orig_d0, regs->d0, regs->a2, regs->a1);
+	printk("A0: %08lx  D5: %08lx  D4: %08lx\n",
+	       regs->a0, regs->d5, regs->d4);
+	printk("D3: %08lx  D2: %08lx  D1: %08lx\n",
+	       regs->d3, regs->d2, regs->d1);
+	if (!(regs->sr & PS_S))
+		printk("USP: %08lx\n", rdusp());
+}
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+	int pid;
+	mm_segment_t fs;
+
+	fs = get_fs();
+	set_fs (KERNEL_DS);
+
+	{
+	register long retval __asm__ ("d0");
+	register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
+
+	retval = __NR_clone;
+	__asm__ __volatile__
+	  ("clrl %%d2\n\t"
+	   "trap #0\n\t"		/* Linux/m68k system call */
+	   "tstl %0\n\t"		/* child or parent */
+	   "jne 1f\n\t"			/* parent - jump */
+#ifdef CONFIG_MMU
+	   "lea %%sp@(%c7),%6\n\t"	/* reload current */
+	   "movel %6@,%6\n\t"
+#endif
+	   "movel %3,%%sp@-\n\t"	/* push argument */
+	   "jsr %4@\n\t"		/* call fn */
+	   "movel %0,%%d1\n\t"		/* pass exit value */
+	   "movel %2,%%d0\n\t"		/* exit */
+	   "trap #0\n"
+	   "1:"
+	   : "+d" (retval)
+	   : "i" (__NR_clone), "i" (__NR_exit),
+	     "r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
+	     "i" (-THREAD_SIZE)
+	   : "d2");
+
+	pid = retval;
+	}
+
+	set_fs (fs);
+	return pid;
+}
+EXPORT_SYMBOL(kernel_thread);
+
+void flush_thread(void)
+{
+	current->thread.fs = __USER_DS;
+#ifdef CONFIG_FPU
+	if (!FPU_IS_EMU) {
+		unsigned long zero = 0;
+		asm volatile("frestore %0": :"m" (zero));
+	}
+#endif
+}
+
+/*
+ * "m68k_fork()".. By the time we get here, the
+ * non-volatile registers have also been saved on the
+ * stack. We do some ugly pointer stuff here.. (see
+ * also copy_thread)
+ */
+
+asmlinkage int m68k_fork(struct pt_regs *regs)
+{
 #ifdef CONFIG_MMU
-#include "process_mm.c"
+	return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
 #else
-#include "process_no.c"
+	return -EINVAL;
 #endif
+}
+
+asmlinkage int m68k_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
+		       NULL, NULL);
+}
+
+asmlinkage int m68k_clone(struct pt_regs *regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	/* syscall2 puts clone_flags in d1 and usp in d2 */
+	clone_flags = regs->d1;
+	newsp = regs->d2;
+	parent_tidptr = (int __user *)regs->d3;
+	child_tidptr = (int __user *)regs->d4;
+	if (!newsp)
+		newsp = rdusp();
+	return do_fork(clone_flags, newsp, regs, 0,
+		       parent_tidptr, child_tidptr);
+}
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		 unsigned long unused,
+		 struct task_struct * p, struct pt_regs * regs)
+{
+	struct pt_regs * childregs;
+	struct switch_stack * childstack, *stack;
+	unsigned long *retp;
+
+	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
+
+	*childregs = *regs;
+	childregs->d0 = 0;
+
+	retp = ((unsigned long *) regs);
+	stack = ((struct switch_stack *) retp) - 1;
+
+	childstack = ((struct switch_stack *) childregs) - 1;
+	*childstack = *stack;
+	childstack->retpc = (unsigned long)ret_from_fork;
+
+	p->thread.usp = usp;
+	p->thread.ksp = (unsigned long)childstack;
+
+	if (clone_flags & CLONE_SETTLS)
+		task_thread_info(p)->tp_value = regs->d5;
+
+	/*
+	 * Must save the current SFC/DFC value, NOT the value when
+	 * the parent was last descheduled - RGH  10-08-96
+	 */
+	p->thread.fs = get_fs().seg;
+
+#ifdef CONFIG_FPU
+	if (!FPU_IS_EMU) {
+		/* Copy the current fpu state */
+		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
+
+		if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
+			if (CPU_IS_COLDFIRE) {
+				asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
+					      "fmovel %/fpiar,%1\n\t"
+					      "fmovel %/fpcr,%2\n\t"
+					      "fmovel %/fpsr,%3"
+					      :
+					      : "m" (p->thread.fp[0]),
+						"m" (p->thread.fpcntl[0]),
+						"m" (p->thread.fpcntl[1]),
+						"m" (p->thread.fpcntl[2])
+					      : "memory");
+			} else {
+				asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
+					      "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
+					      :
+					      : "m" (p->thread.fp[0]),
+						"m" (p->thread.fpcntl[0])
+					      : "memory");
+			}
+		}
+
+		/* Restore the state in case the fpu was busy */
+		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
+	}
+#endif /* CONFIG_FPU */
+
+	return 0;
+}
+
+/* Fill in the fpu structure for a core dump.  */
+#ifdef CONFIG_FPU
+int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
+{
+	char fpustate[216];
+
+	if (FPU_IS_EMU) {
+		int i;
+
+		memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
+		memcpy(fpu->fpregs, current->thread.fp, 96);
+		/* Convert internal fpu reg representation
+		 * into long double format
+		 */
+		for (i = 0; i < 24; i += 3)
+			fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
+			                 ((fpu->fpregs[i] & 0x0000ffff) << 16);
+		return 1;
+	}
+
+	/* First dump the fpu context to avoid protocol violation.  */
+	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
+	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
+		return 0;
+
+	if (CPU_IS_COLDFIRE) {
+		asm volatile ("fmovel %/fpiar,%0\n\t"
+			      "fmovel %/fpcr,%1\n\t"
+			      "fmovel %/fpsr,%2\n\t"
+			      "fmovemd %/fp0-%/fp7,%3"
+			      :
+			      : "m" (fpu->fpcntl[0]),
+				"m" (fpu->fpcntl[1]),
+				"m" (fpu->fpcntl[2]),
+				"m" (fpu->fpregs[0])
+			      : "memory");
+	} else {
+		asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
+			      :
+			      : "m" (fpu->fpcntl[0])
+			      : "memory");
+		asm volatile ("fmovemx %/fp0-%/fp7,%0"
+			      :
+			      : "m" (fpu->fpregs[0])
+			      : "memory");
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(dump_fpu);
+#endif /* CONFIG_FPU */
+
+/*
+ * sys_execve() executes a new program.
+ */
+asmlinkage int sys_execve(const char __user *name,
+			  const char __user *const __user *argv,
+			  const char __user *const __user *envp)
+{
+	int error;
+	char * filename;
+	struct pt_regs *regs = (struct pt_regs *) &name;
+
+	filename = getname(name);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return error;
+	error = do_execve(filename, argv, envp, regs);
+	putname(filename);
+	return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	unsigned long fp, pc;
+	unsigned long stack_page;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	stack_page = (unsigned long)task_stack_page(p);
+	fp = ((struct switch_stack *)p->thread.ksp)->a6;
+	do {
+		if (fp < stack_page+sizeof(struct thread_info) ||
+		    fp >= 8184+stack_page)
+			return 0;
+		pc = ((unsigned long *)fp)[1];
+		if (!in_sched_functions(pc))
+			return pc;
+		fp = *(unsigned long *) fp;
+	} while (count++ < 16);
+	return 0;
+}
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
deleted file mode 100644
index fe4186b5fc32..000000000000
--- a/arch/m68k/kernel/process_mm.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/process.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  68060 fixes by Jesper Skov
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/reboot.h>
-#include <linux/init_task.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-
-asmlinkage void ret_from_fork(void);
-
-
-/*
- * Return saved PC from a blocked thread
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(sw->retpc))
-		return ((unsigned long *)sw->a6)[1];
-	else
-		return sw->retpc;
-}
-
-/*
- * The idle loop on an m68k..
- */
-static void default_idle(void)
-{
-	if (!need_resched())
-#if defined(MACH_ATARI_ONLY)
-		/* block out HSYNC on the atari (falcon) */
-		__asm__("stop #0x2200" : : : "cc");
-#else
-		__asm__("stop #0x2000" : : : "cc");
-#endif
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle(void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			idle();
-		schedule_preempt_disabled();
-	}
-}
-
-void machine_restart(char * __unused)
-{
-	if (mach_reset)
-		mach_reset();
-	for (;;);
-}
-
-void machine_halt(void)
-{
-	if (mach_halt)
-		mach_halt();
-	for (;;);
-}
-
-void machine_power_off(void)
-{
-	if (mach_power_off)
-		mach_power_off();
-	for (;;);
-}
-
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
-void show_regs(struct pt_regs * regs)
-{
-	printk("\n");
-	printk("Format %02x  Vector: %04x  PC: %08lx  Status: %04x    %s\n",
-	       regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
-	printk("ORIG_D0: %08lx  D0: %08lx  A2: %08lx  A1: %08lx\n",
-	       regs->orig_d0, regs->d0, regs->a2, regs->a1);
-	printk("A0: %08lx  D5: %08lx  D4: %08lx\n",
-	       regs->a0, regs->d5, regs->d4);
-	printk("D3: %08lx  D2: %08lx  D1: %08lx\n",
-	       regs->d3, regs->d2, regs->d1);
-	if (!(regs->sr & PS_S))
-		printk("USP: %08lx\n", rdusp());
-}
-
-/*
- * Create a kernel thread
- */
-int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
-{
-	int pid;
-	mm_segment_t fs;
-
-	fs = get_fs();
-	set_fs (KERNEL_DS);
-
-	{
-	register long retval __asm__ ("d0");
-	register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
-
-	retval = __NR_clone;
-	__asm__ __volatile__
-	  ("clrl %%d2\n\t"
-	   "trap #0\n\t"		/* Linux/m68k system call */
-	   "tstl %0\n\t"		/* child or parent */
-	   "jne 1f\n\t"			/* parent - jump */
-	   "lea %%sp@(%c7),%6\n\t"	/* reload current */
-	   "movel %6@,%6\n\t"
-	   "movel %3,%%sp@-\n\t"	/* push argument */
-	   "jsr %4@\n\t"		/* call fn */
-	   "movel %0,%%d1\n\t"		/* pass exit value */
-	   "movel %2,%%d0\n\t"		/* exit */
-	   "trap #0\n"
-	   "1:"
-	   : "+d" (retval)
-	   : "i" (__NR_clone), "i" (__NR_exit),
-	     "r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
-	     "i" (-THREAD_SIZE)
-	   : "d2");
-
-	pid = retval;
-	}
-
-	set_fs (fs);
-	return pid;
-}
-EXPORT_SYMBOL(kernel_thread);
-
-void flush_thread(void)
-{
-	unsigned long zero = 0;
-
-	current->thread.fs = __USER_DS;
-	if (!FPU_IS_EMU)
-		asm volatile("frestore %0": :"m" (zero));
-}
-
-/*
- * "m68k_fork()".. By the time we get here, the
- * non-volatile registers have also been saved on the
- * stack. We do some ugly pointer stuff here.. (see
- * also copy_thread)
- */
-
-asmlinkage int m68k_fork(struct pt_regs *regs)
-{
-	return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
-}
-
-asmlinkage int m68k_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
-		       NULL, NULL);
-}
-
-asmlinkage int m68k_clone(struct pt_regs *regs)
-{
-	unsigned long clone_flags;
-	unsigned long newsp;
-	int __user *parent_tidptr, *child_tidptr;
-
-	/* syscall2 puts clone_flags in d1 and usp in d2 */
-	clone_flags = regs->d1;
-	newsp = regs->d2;
-	parent_tidptr = (int __user *)regs->d3;
-	child_tidptr = (int __user *)regs->d4;
-	if (!newsp)
-		newsp = rdusp();
-	return do_fork(clone_flags, newsp, regs, 0,
-		       parent_tidptr, child_tidptr);
-}
-
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		 unsigned long unused,
-		 struct task_struct * p, struct pt_regs * regs)
-{
-	struct pt_regs * childregs;
-	struct switch_stack * childstack, *stack;
-	unsigned long *retp;
-
-	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
-
-	*childregs = *regs;
-	childregs->d0 = 0;
-
-	retp = ((unsigned long *) regs);
-	stack = ((struct switch_stack *) retp) - 1;
-
-	childstack = ((struct switch_stack *) childregs) - 1;
-	*childstack = *stack;
-	childstack->retpc = (unsigned long)ret_from_fork;
-
-	p->thread.usp = usp;
-	p->thread.ksp = (unsigned long)childstack;
-
-	if (clone_flags & CLONE_SETTLS)
-		task_thread_info(p)->tp_value = regs->d5;
-
-	/*
-	 * Must save the current SFC/DFC value, NOT the value when
-	 * the parent was last descheduled - RGH  10-08-96
-	 */
-	p->thread.fs = get_fs().seg;
-
-	if (!FPU_IS_EMU) {
-		/* Copy the current fpu state */
-		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
-
-		if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
-			if (CPU_IS_COLDFIRE) {
-				asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
-					      "fmovel %/fpiar,%1\n\t"
-					      "fmovel %/fpcr,%2\n\t"
-					      "fmovel %/fpsr,%3"
-					      :
-					      : "m" (p->thread.fp[0]),
-						"m" (p->thread.fpcntl[0]),
-						"m" (p->thread.fpcntl[1]),
-						"m" (p->thread.fpcntl[2])
-					      : "memory");
-			} else {
-				asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
-					      "fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
-					      :
-					      : "m" (p->thread.fp[0]),
-						"m" (p->thread.fpcntl[0])
-					      : "memory");
-			}
-		}
-
-		/* Restore the state in case the fpu was busy */
-		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
-	}
-
-	return 0;
-}
-
-/* Fill in the fpu structure for a core dump.  */
-
-int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
-{
-	char fpustate[216];
-
-	if (FPU_IS_EMU) {
-		int i;
-
-		memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
-		memcpy(fpu->fpregs, current->thread.fp, 96);
-		/* Convert internal fpu reg representation
-		 * into long double format
-		 */
-		for (i = 0; i < 24; i += 3)
-			fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
-			                 ((fpu->fpregs[i] & 0x0000ffff) << 16);
-		return 1;
-	}
-
-	/* First dump the fpu context to avoid protocol violation.  */
-	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
-	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
-		return 0;
-
-	if (CPU_IS_COLDFIRE) {
-		asm volatile ("fmovel %/fpiar,%0\n\t"
-			      "fmovel %/fpcr,%1\n\t"
-			      "fmovel %/fpsr,%2\n\t"
-			      "fmovemd %/fp0-%/fp7,%3"
-			      :
-			      : "m" (fpu->fpcntl[0]),
-				"m" (fpu->fpcntl[1]),
-				"m" (fpu->fpcntl[2]),
-				"m" (fpu->fpregs[0])
-			      : "memory");
-	} else {
-		asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
-			      :
-			      : "m" (fpu->fpcntl[0])
-			      : "memory");
-		asm volatile ("fmovemx %/fp0-%/fp7,%0"
-			      :
-			      : "m" (fpu->fpregs[0])
-			      : "memory");
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-/*
- * sys_execve() executes a new program.
- */
-asmlinkage int sys_execve(const char __user *name,
-			  const char __user *const __user *argv,
-			  const char __user *const __user *envp)
-{
-	int error;
-	char * filename;
-	struct pt_regs *regs = (struct pt_regs *) &name;
-
-	filename = getname(name);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-	return error;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long fp, pc;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_page = (unsigned long)task_stack_page(p);
-	fp = ((struct switch_stack *)p->thread.ksp)->a6;
-	do {
-		if (fp < stack_page+sizeof(struct thread_info) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (!in_sched_functions(pc))
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-	return 0;
-}
diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c
deleted file mode 100644
index f7fe6c348595..000000000000
--- a/arch/m68k/kernel/process_no.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/process.c
- *
- *  Copyright (C) 1995  Hamish Macdonald
- *
- *  68060 fixes by Jesper Skov
- *
- *  uClinux changes
- *  Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-asmlinkage void ret_from_fork(void);
-
-/*
- * The following aren't currently used.
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-/*
- * The idle loop on an m68knommu..
- */
-static void default_idle(void)
-{
-	local_irq_disable();
- 	while (!need_resched()) {
-		/* This stop will re-enable interrupts */
- 		__asm__("stop #0x2000" : : : "cc");
-		local_irq_disable();
-	}
-	local_irq_enable();
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle(void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		idle();
-		schedule_preempt_disabled();
-	}
-}
-
-void machine_restart(char * __unused)
-{
-	if (mach_reset)
-		mach_reset();
-	for (;;);
-}
-
-void machine_halt(void)
-{
-	if (mach_halt)
-		mach_halt();
-	for (;;);
-}
-
-void machine_power_off(void)
-{
-	if (mach_power_off)
-		mach_power_off();
-	for (;;);
-}
-
-void show_regs(struct pt_regs * regs)
-{
-	printk(KERN_NOTICE "\n");
-	printk(KERN_NOTICE "Format %02x  Vector: %04x  PC: %08lx  Status: %04x    %s\n",
-	       regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
-	printk(KERN_NOTICE "ORIG_D0: %08lx  D0: %08lx  A2: %08lx  A1: %08lx\n",
-	       regs->orig_d0, regs->d0, regs->a2, regs->a1);
-	printk(KERN_NOTICE "A0: %08lx  D5: %08lx  D4: %08lx\n",
-	       regs->a0, regs->d5, regs->d4);
-	printk(KERN_NOTICE "D3: %08lx  D2: %08lx  D1: %08lx\n",
-	       regs->d3, regs->d2, regs->d1);
-	if (!(regs->sr & PS_S))
-		printk(KERN_NOTICE "USP: %08lx\n", rdusp());
-}
-
-/*
- * Create a kernel thread
- */
-int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
-{
-	int retval;
-	long clone_arg = flags | CLONE_VM;
-	mm_segment_t fs;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	__asm__ __volatile__ (
-			"movel	%%sp, %%d2\n\t"
-			"movel	%5, %%d1\n\t"
-			"movel	%1, %%d0\n\t"
-			"trap	#0\n\t"
-			"cmpl	%%sp, %%d2\n\t"
-			"jeq	1f\n\t"
-			"movel	%3, %%sp@-\n\t"
-			"jsr	%4@\n\t"
-			"movel	%2, %%d0\n\t"
-			"trap	#0\n"
-			"1:\n\t"
-			"movel	%%d0, %0\n"
-		: "=d" (retval)
-		: "i" (__NR_clone),
-		  "i" (__NR_exit),
-		  "a" (arg),
-		  "a" (fn),
-		  "a" (clone_arg)
-		: "cc", "%d0", "%d1", "%d2");
-
-	set_fs(fs);
-	return retval;
-}
-EXPORT_SYMBOL(kernel_thread);
-
-void flush_thread(void)
-{
-#ifdef CONFIG_FPU
-	unsigned long zero = 0;
-#endif
-
-	current->thread.fs = __USER_DS;
-#ifdef CONFIG_FPU
-	if (!FPU_IS_EMU)
-		asm volatile (".chip 68k/68881\n\t"
-			      "frestore %0\n\t"
-			      ".chip 68k" : : "m" (zero));
-#endif
-}
-
-/*
- * "m68k_fork()".. By the time we get here, the
- * non-volatile registers have also been saved on the
- * stack. We do some ugly pointer stuff here.. (see
- * also copy_thread)
- */
-
-asmlinkage int m68k_fork(struct pt_regs *regs)
-{
-	/* fork almost works, enough to trick you into looking elsewhere :-( */
-	return(-EINVAL);
-}
-
-asmlinkage int m68k_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
-}
-
-asmlinkage int m68k_clone(struct pt_regs *regs)
-{
-	unsigned long clone_flags;
-	unsigned long newsp;
-
-	/* syscall2 puts clone_flags in d1 and usp in d2 */
-	clone_flags = regs->d1;
-	newsp = regs->d2;
-	if (!newsp)
-		newsp = rdusp();
-        return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
-}
-
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long topstk,
-		struct task_struct * p, struct pt_regs * regs)
-{
-	struct pt_regs * childregs;
-	struct switch_stack * childstack, *stack;
-	unsigned long *retp;
-
-	childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
-
-	*childregs = *regs;
-	childregs->d0 = 0;
-
-	retp = ((unsigned long *) regs);
-	stack = ((struct switch_stack *) retp) - 1;
-
-	childstack = ((struct switch_stack *) childregs) - 1;
-	*childstack = *stack;
-	childstack->retpc = (unsigned long)ret_from_fork;
-
-	p->thread.usp = usp;
-	p->thread.ksp = (unsigned long)childstack;
-
-	if (clone_flags & CLONE_SETTLS)
-		task_thread_info(p)->tp_value = regs->d5;
-
-	/*
-	 * Must save the current SFC/DFC value, NOT the value when
-	 * the parent was last descheduled - RGH  10-08-96
-	 */
-	p->thread.fs = get_fs().seg;
-
-#ifdef CONFIG_FPU
-	if (!FPU_IS_EMU) {
-		/* Copy the current fpu state */
-		asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
-
-		if (p->thread.fpstate[0])
-		  asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
-				"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
-				: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
-				: "memory");
-		/* Restore the state in case the fpu was busy */
-		asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
-	}
-#endif
-
-	return 0;
-}
-
-/* Fill in the fpu structure for a core dump.  */
-
-int dump_fpu(struct pt_regs *regs, struct user_m68kfp_struct *fpu)
-{
-#ifdef CONFIG_FPU
-	char fpustate[216];
-
-	if (FPU_IS_EMU) {
-		int i;
-
-		memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
-		memcpy(fpu->fpregs, current->thread.fp, 96);
-		/* Convert internal fpu reg representation
-		 * into long double format
-		 */
-		for (i = 0; i < 24; i += 3)
-			fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
-			                 ((fpu->fpregs[i] & 0x0000ffff) << 16);
-		return 1;
-	}
-
-	/* First dump the fpu context to avoid protocol violation.  */
-	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
-	if (!fpustate[0])
-		return 0;
-
-	asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
-		:: "m" (fpu->fpcntl[0])
-		: "memory");
-	asm volatile ("fmovemx %/fp0-%/fp7,%0"
-		:: "m" (fpu->fpregs[0])
-		: "memory");
-#endif
-	return 1;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-/*
- *	Generic dumping code. Used for panic and debug.
- */
-void dump(struct pt_regs *fp)
-{
-	unsigned long	*sp;
-	unsigned char	*tp;
-	int		i;
-
-	printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
-	printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
-
-	if (current->mm) {
-		printk(KERN_EMERG "TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
-			(int) current->mm->start_code,
-			(int) current->mm->end_code,
-			(int) current->mm->start_data,
-			(int) current->mm->end_data,
-			(int) current->mm->end_data,
-			(int) current->mm->brk);
-		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
-			(int) current->mm->start_stack,
-			(int)(((unsigned long) current) + THREAD_SIZE));
-	}
-
-	printk(KERN_EMERG "PC: %08lx\n", fp->pc);
-	printk(KERN_EMERG "SR: %08lx    SP: %08lx\n", (long) fp->sr, (long) fp);
-	printk(KERN_EMERG "d0: %08lx    d1: %08lx    d2: %08lx    d3: %08lx\n",
-		fp->d0, fp->d1, fp->d2, fp->d3);
-	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
-		fp->d4, fp->d5, fp->a0, fp->a1);
-	printk(KERN_EMERG "\nUSP: %08x   TRAPFRAME: %p\n",
-		(unsigned int) rdusp(), fp);
-
-	printk(KERN_EMERG "\nCODE:");
-	tp = ((unsigned char *) fp->pc) - 0x20;
-	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
-		if ((i % 0x10) == 0)
-			printk(KERN_EMERG "%p: ", tp + i);
-		printk("%08x ", (int) *sp++);
-	}
-	printk(KERN_EMERG "\n");
-
-	printk(KERN_EMERG "KERNEL STACK:");
-	tp = ((unsigned char *) fp) - 0x40;
-	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
-		if ((i % 0x10) == 0)
-			printk(KERN_EMERG "%p: ", tp + i);
-		printk("%08x ", (int) *sp++);
-	}
-	printk(KERN_EMERG "\n");
-
-	printk(KERN_EMERG "USER STACK:");
-	tp = (unsigned char *) (rdusp() - 0x10);
-	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
-		if ((i % 0x10) == 0)
-			printk(KERN_EMERG "%p: ", tp + i);
-		printk("%08x ", (int) *sp++);
-	}
-	printk(KERN_EMERG "\n");
-}
-
-/*
- * sys_execve() executes a new program.
- */
-asmlinkage int sys_execve(const char *name,
-			  const char *const *argv,
-			  const char *const *envp)
-{
-	int error;
-	char * filename;
-	struct pt_regs *regs = (struct pt_regs *) &name;
-
-	filename = getname(name);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-	return error;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long fp, pc;
-	unsigned long stack_page;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	stack_page = (unsigned long)p;
-	fp = ((struct switch_stack *)p->thread.ksp)->a6;
-	do {
-		if (fp < stack_page+sizeof(struct thread_info) ||
-		    fp >= THREAD_SIZE-8+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (!in_sched_functions(pc))
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-	return 0;
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
-
-	/* Check whether the thread is blocked in resume() */
-	if (in_sched_functions(sw->retpc))
-		return ((unsigned long *)sw->a6)[1];
-	else
-		return sw->retpc;
-}
-
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 07a417550e94..149a05f8b9ee 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -1,5 +1,305 @@
+/*
+ *  linux/arch/m68k/kernel/ptrace.c
+ *
+ *  Copyright (C) 1994 by Hamish Macdonald
+ *  Taken from linux/kernel/ptrace.c and modified for M680x0.
+ *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/signal.h>
+#include <linux/tracehook.h>
+
+#include <asm/uaccess.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+
+/*
+ * does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/* determines which bits in the SR the user has access to. */
+/* 1 = access 0 = no access */
+#define SR_MASK 0x001f
+
+/* sets the trace bits. */
+#define TRACE_BITS 0xC000
+#define T1_BIT 0x8000
+#define T0_BIT 0x4000
+
+/* Find the stack offset for a register, relative to thread.esp0. */
+#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
+#define SW_REG(reg)	((long)&((struct switch_stack *)0)->reg \
+			 - sizeof(struct switch_stack))
+/* Mapping from PT_xxx to the stack offset at which the register is
+   saved.  Notice that usp has no stack-slot and needs to be treated
+   specially (see get_reg/put_reg below). */
+static const int regoff[] = {
+	[0]	= PT_REG(d1),
+	[1]	= PT_REG(d2),
+	[2]	= PT_REG(d3),
+	[3]	= PT_REG(d4),
+	[4]	= PT_REG(d5),
+	[5]	= SW_REG(d6),
+	[6]	= SW_REG(d7),
+	[7]	= PT_REG(a0),
+	[8]	= PT_REG(a1),
+	[9]	= PT_REG(a2),
+	[10]	= SW_REG(a3),
+	[11]	= SW_REG(a4),
+	[12]	= SW_REG(a5),
+	[13]	= SW_REG(a6),
+	[14]	= PT_REG(d0),
+	[15]	= -1,
+	[16]	= PT_REG(orig_d0),
+	[17]	= PT_REG(sr),
+	[18]	= PT_REG(pc),
+};
+
+/*
+ * Get contents of register REGNO in task TASK.
+ */
+static inline long get_reg(struct task_struct *task, int regno)
+{
+	unsigned long *addr;
+
+	if (regno == PT_USP)
+		addr = &task->thread.usp;
+	else if (regno < ARRAY_SIZE(regoff))
+		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
+	else
+		return 0;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR)
+			return *(unsigned short *)addr;
+	}
+	return *addr;
+}
+
+/*
+ * Write contents of register REGNO in task TASK.
+ */
+static inline int put_reg(struct task_struct *task, int regno,
+			  unsigned long data)
+{
+	unsigned long *addr;
+
+	if (regno == PT_USP)
+		addr = &task->thread.usp;
+	else if (regno < ARRAY_SIZE(regoff))
+		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
+	else
+		return -1;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR) {
+			*(unsigned short *)addr = data;
+			return 0;
+		}
+	}
+	*addr = data;
+	return 0;
+}
+
+/*
+ * Make sure the single step bit is not set.
+ */
+static inline void singlestep_disable(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp);
+	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	singlestep_disable(child);
+}
+
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T1_BIT);
+	set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
+}
+
 #ifdef CONFIG_MMU
-#include "ptrace_mm.c"
-#else
-#include "ptrace_no.c"
+void user_enable_block_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T0_BIT);
+}
 #endif
+
+void user_disable_single_step(struct task_struct *child)
+{
+	singlestep_disable(child);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	unsigned long tmp;
+	int i, ret = 0;
+	int regno = addr >> 2; /* temporary hack. */
+	unsigned long __user *datap = (unsigned long __user *) data;
+
+	switch (request) {
+	/* read the word at location addr in the USER area. */
+	case PTRACE_PEEKUSR:
+		if (addr & 3)
+			goto out_eio;
+
+		if (regno >= 0 && regno < 19) {
+			tmp = get_reg(child, regno);
+		} else if (regno >= 21 && regno < 49) {
+			tmp = child->thread.fp[regno - 21];
+			/* Convert internal fpu reg representation
+			 * into long double format
+			 */
+			if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
+				tmp = ((tmp & 0xffff0000) << 15) |
+				      ((tmp & 0x0000ffff) << 16);
+#ifndef CONFIG_MMU
+		} else if (regno == 49) {
+			tmp = child->mm->start_code;
+		} else if (regno == 50) {
+			tmp = child->mm->start_data;
+		} else if (regno == 51) {
+			tmp = child->mm->end_code;
+#endif
+		} else
+			goto out_eio;
+		ret = put_user(tmp, datap);
+		break;
+
+	case PTRACE_POKEUSR:
+	/* write the word at location addr in the USER area */
+		if (addr & 3)
+			goto out_eio;
+
+		if (regno == PT_SR) {
+			data &= SR_MASK;
+			data |= get_reg(child, PT_SR) & ~SR_MASK;
+		}
+		if (regno >= 0 && regno < 19) {
+			if (put_reg(child, regno, data))
+				goto out_eio;
+		} else if (regno >= 21 && regno < 48) {
+			/* Convert long double format
+			 * into internal fpu reg representation
+			 */
+			if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
+				data <<= 15;
+				data = (data & 0xffff0000) |
+				       ((data & 0x0000ffff) >> 1);
+			}
+			child->thread.fp[regno - 21] = data;
+		} else
+			goto out_eio;
+		break;
+
+	case PTRACE_GETREGS:	/* Get all gp regs from the child. */
+		for (i = 0; i < 19; i++) {
+			tmp = get_reg(child, i);
+			ret = put_user(tmp, datap);
+			if (ret)
+				break;
+			datap++;
+		}
+		break;
+
+	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
+		for (i = 0; i < 19; i++) {
+			ret = get_user(tmp, datap);
+			if (ret)
+				break;
+			if (i == PT_SR) {
+				tmp &= SR_MASK;
+				tmp |= get_reg(child, PT_SR) & ~SR_MASK;
+			}
+			put_reg(child, i, tmp);
+			datap++;
+		}
+		break;
+
+	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
+		if (copy_to_user(datap, &child->thread.fp,
+				 sizeof(struct user_m68kfp_struct)))
+			ret = -EFAULT;
+		break;
+
+	case PTRACE_SETFPREGS:	/* Set the child FPU state. */
+		if (copy_from_user(&child->thread.fp, datap,
+				   sizeof(struct user_m68kfp_struct)))
+			ret = -EFAULT;
+		break;
+
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->tp_value, datap);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+out_eio:
+	return -EIO;
+}
+
+asmlinkage void syscall_trace(void)
+{
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+#ifdef CONFIG_COLDFIRE
+asmlinkage int syscall_trace_enter(void)
+{
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ret = tracehook_report_syscall_entry(task_pt_regs(current));
+	return ret;
+}
+
+asmlinkage void syscall_trace_leave(void)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(task_pt_regs(current), 0);
+}
+#endif /* CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/ptrace_mm.c b/arch/m68k/kernel/ptrace_mm.c
deleted file mode 100644
index 7bc999b73529..000000000000
--- a/arch/m68k/kernel/ptrace_mm.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/ptrace.c
- *
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/tracehook.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/* determines which bits in the SR the user has access to. */
-/* 1 = access 0 = no access */
-#define SR_MASK 0x001f
-
-/* sets the trace bits. */
-#define TRACE_BITS 0xC000
-#define T1_BIT 0x8000
-#define T0_BIT 0x4000
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-#define SW_REG(reg)	((long)&((struct switch_stack *)0)->reg \
-			 - sizeof(struct switch_stack))
-/* Mapping from PT_xxx to the stack offset at which the register is
-   saved.  Notice that usp has no stack-slot and needs to be treated
-   specially (see get_reg/put_reg below). */
-static const int regoff[] = {
-	[0]	= PT_REG(d1),
-	[1]	= PT_REG(d2),
-	[2]	= PT_REG(d3),
-	[3]	= PT_REG(d4),
-	[4]	= PT_REG(d5),
-	[5]	= SW_REG(d6),
-	[6]	= SW_REG(d7),
-	[7]	= PT_REG(a0),
-	[8]	= PT_REG(a1),
-	[9]	= PT_REG(a2),
-	[10]	= SW_REG(a3),
-	[11]	= SW_REG(a4),
-	[12]	= SW_REG(a5),
-	[13]	= SW_REG(a6),
-	[14]	= PT_REG(d0),
-	[15]	= -1,
-	[16]	= PT_REG(orig_d0),
-	[17]	= PT_REG(sr),
-	[18]	= PT_REG(pc),
-};
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-static inline long get_reg(struct task_struct *task, int regno)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
-	else
-		return 0;
-	/* Need to take stkadj into account. */
-	if (regno == PT_SR || regno == PT_PC) {
-		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
-		addr = (unsigned long *) ((unsigned long)addr + stkadj);
-		/* The sr is actually a 16 bit register.  */
-		if (regno == PT_SR)
-			return *(unsigned short *)addr;
-	}
-	return *addr;
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-static inline int put_reg(struct task_struct *task, int regno,
-			  unsigned long data)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
-	else
-		return -1;
-	/* Need to take stkadj into account. */
-	if (regno == PT_SR || regno == PT_PC) {
-		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
-		addr = (unsigned long *) ((unsigned long)addr + stkadj);
-		/* The sr is actually a 16 bit register.  */
-		if (regno == PT_SR) {
-			*(unsigned short *)addr = data;
-			return 0;
-		}
-	}
-	*addr = data;
-	return 0;
-}
-
-/*
- * Make sure the single step bit is not set.
- */
-static inline void singlestep_disable(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp);
-	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-	singlestep_disable(child);
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp | T1_BIT);
-	set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-}
-
-void user_enable_block_step(struct task_struct *child)
-{
-	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
-	put_reg(child, PT_SR, tmp | T0_BIT);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
-	singlestep_disable(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	unsigned long tmp;
-	int i, ret = 0;
-	int regno = addr >> 2; /* temporary hack. */
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR:
-		if (addr & 3)
-			goto out_eio;
-
-		if (regno >= 0 && regno < 19) {
-			tmp = get_reg(child, regno);
-		} else if (regno >= 21 && regno < 49) {
-			tmp = child->thread.fp[regno - 21];
-			/* Convert internal fpu reg representation
-			 * into long double format
-			 */
-			if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
-				tmp = ((tmp & 0xffff0000) << 15) |
-				      ((tmp & 0x0000ffff) << 16);
-		} else
-			goto out_eio;
-		ret = put_user(tmp, datap);
-		break;
-
-	case PTRACE_POKEUSR:
-	/* write the word at location addr in the USER area */
-		if (addr & 3)
-			goto out_eio;
-
-		if (regno == PT_SR) {
-			data &= SR_MASK;
-			data |= get_reg(child, PT_SR) & ~SR_MASK;
-		}
-		if (regno >= 0 && regno < 19) {
-			if (put_reg(child, regno, data))
-				goto out_eio;
-		} else if (regno >= 21 && regno < 48) {
-			/* Convert long double format
-			 * into internal fpu reg representation
-			 */
-			if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
-				data <<= 15;
-				data = (data & 0xffff0000) |
-				       ((data & 0x0000ffff) >> 1);
-			}
-			child->thread.fp[regno - 21] = data;
-		} else
-			goto out_eio;
-		break;
-
-	case PTRACE_GETREGS:	/* Get all gp regs from the child. */
-		for (i = 0; i < 19; i++) {
-			tmp = get_reg(child, i);
-			ret = put_user(tmp, datap);
-			if (ret)
-				break;
-			datap++;
-		}
-		break;
-
-	case PTRACE_SETREGS:	/* Set all gp regs in the child. */
-		for (i = 0; i < 19; i++) {
-			ret = get_user(tmp, datap);
-			if (ret)
-				break;
-			if (i == PT_SR) {
-				tmp &= SR_MASK;
-				tmp |= get_reg(child, PT_SR) & ~SR_MASK;
-			}
-			put_reg(child, i, tmp);
-			datap++;
-		}
-		break;
-
-	case PTRACE_GETFPREGS:	/* Get the child FPU state. */
-		if (copy_to_user(datap, &child->thread.fp,
-				 sizeof(struct user_m68kfp_struct)))
-			ret = -EFAULT;
-		break;
-
-	case PTRACE_SETFPREGS:	/* Set the child FPU state. */
-		if (copy_from_user(&child->thread.fp, datap,
-				   sizeof(struct user_m68kfp_struct)))
-			ret = -EFAULT;
-		break;
-
-	case PTRACE_GET_THREAD_AREA:
-		ret = put_user(task_thread_info(child)->tp_value, datap);
-		break;
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-out_eio:
-	return -EIO;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-#ifdef CONFIG_COLDFIRE
-asmlinkage int syscall_trace_enter(void)
-{
-	int ret = 0;
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		ret = tracehook_report_syscall_entry(task_pt_regs(current));
-	return ret;
-}
-
-asmlinkage void syscall_trace_leave(void)
-{
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(task_pt_regs(current), 0);
-}
-#endif /* CONFIG_COLDFIRE */
diff --git a/arch/m68k/kernel/ptrace_no.c b/arch/m68k/kernel/ptrace_no.c
deleted file mode 100644
index 6709fb707335..000000000000
--- a/arch/m68k/kernel/ptrace_no.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/ptrace.c
- *
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-#include <linux/tracehook.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/* determines which bits in the SR the user has access to. */
-/* 1 = access 0 = no access */
-#define SR_MASK 0x001f
-
-/* sets the trace bits. */
-#define TRACE_BITS 0x8000
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
-#define SW_REG(reg)	((long)&((struct switch_stack *)0)->reg \
-			 - sizeof(struct switch_stack))
-/* Mapping from PT_xxx to the stack offset at which the register is
-   saved.  Notice that usp has no stack-slot and needs to be treated
-   specially (see get_reg/put_reg below). */
-static int regoff[] = {
-	PT_REG(d1), PT_REG(d2), PT_REG(d3), PT_REG(d4),
-	PT_REG(d5), SW_REG(d6), SW_REG(d7), PT_REG(a0),
-	PT_REG(a1), PT_REG(a2), SW_REG(a3), SW_REG(a4),
-	SW_REG(a5), SW_REG(a6), PT_REG(d0), -1,
-	PT_REG(orig_d0), PT_REG(sr), PT_REG(pc),
-};
-
-/*
- * Get contents of register REGNO in task TASK.
- */
-static inline long get_reg(struct task_struct *task, int regno)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
-	else
-		return 0;
-	return *addr;
-}
-
-/*
- * Write contents of register REGNO in task TASK.
- */
-static inline int put_reg(struct task_struct *task, int regno,
-			  unsigned long data)
-{
-	unsigned long *addr;
-
-	if (regno == PT_USP)
-		addr = &task->thread.usp;
-	else if (regno < ARRAY_SIZE(regoff))
-		addr = (unsigned long *) (task->thread.esp0 + regoff[regno]);
-	else
-		return -1;
-	*addr = data;
-	return 0;
-}
-
-void user_enable_single_step(struct task_struct *task)
-{
-	unsigned long srflags;
-	srflags = get_reg(task, PT_SR) | (TRACE_BITS << 16);
-	put_reg(task, PT_SR, srflags);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
-	unsigned long srflags;
-	srflags = get_reg(task, PT_SR) & ~(TRACE_BITS << 16);
-	put_reg(task, PT_SR, srflags);
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
-void ptrace_disable(struct task_struct *child)
-{
-	/* make sure the single step bit is not set. */
-	user_disable_single_step(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	int regno = addr >> 2;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-		/* read the word at location addr in the USER area. */
-		case PTRACE_PEEKUSR: {
-			unsigned long tmp;
-			
-			ret = -EIO;
-			if ((addr & 3) || addr > sizeof(struct user) - 3)
-				break;
-			
-			tmp = 0;  /* Default return condition */
-			ret = -EIO;
-			if (regno < 19) {
-				tmp = get_reg(child, regno);
-				if (regno == PT_SR)
-					tmp >>= 16;
-			} else if (regno >= 21 && regno < 49) {
-				tmp = child->thread.fp[regno - 21];
-			} else if (regno == 49) {
-				tmp = child->mm->start_code;
-			} else if (regno == 50) {
-				tmp = child->mm->start_data;
-			} else if (regno == 51) {
-				tmp = child->mm->end_code;
-			} else
-				break;
-			ret = put_user(tmp, datap);
-			break;
-		}
-
-		case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
-			ret = -EIO;
-			if ((addr & 3) || addr > sizeof(struct user) - 3)
-				break;
-
-			if (regno == PT_SR) {
-				data &= SR_MASK;
-				data <<= 16;
-				data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
-			}
-			if (regno < 19) {
-				if (put_reg(child, regno, data))
-					break;
-				ret = 0;
-				break;
-			}
-			if (regno >= 21 && regno < 48)
-			{
-				child->thread.fp[regno - 21] = data;
-				ret = 0;
-			}
-			break;
-
-		case PTRACE_GETREGS: { /* Get all gp regs from the child. */
-		  	int i;
-			unsigned long tmp;
-			for (i = 0; i < 19; i++) {
-			    tmp = get_reg(child, i);
-			    if (i == PT_SR)
-				tmp >>= 16;
-			    if (put_user(tmp, datap)) {
-				ret = -EFAULT;
-				break;
-			    }
-			    datap++;
-			}
-			ret = 0;
-			break;
-		}
-
-		case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-			int i;
-			unsigned long tmp;
-			for (i = 0; i < 19; i++) {
-			    if (get_user(tmp, datap)) {
-				ret = -EFAULT;
-				break;
-			    }
-			    if (i == PT_SR) {
-				tmp &= SR_MASK;
-				tmp <<= 16;
-				tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
-			    }
-			    put_reg(child, i, tmp);
-			    datap++;
-			}
-			ret = 0;
-			break;
-		}
-
-#ifdef PTRACE_GETFPREGS
-		case PTRACE_GETFPREGS: { /* Get the child FPU state. */
-			ret = 0;
-			if (copy_to_user(datap, &child->thread.fp,
-					 sizeof(struct user_m68kfp_struct)))
-				ret = -EFAULT;
-			break;
-		}
-#endif
-
-#ifdef PTRACE_SETFPREGS
-		case PTRACE_SETFPREGS: { /* Set the child FPU state. */
-			ret = 0;
-			if (copy_from_user(&child->thread.fp, datap,
-					   sizeof(struct user_m68kfp_struct)))
-				ret = -EFAULT;
-			break;
-		}
-#endif
-
-	case PTRACE_GET_THREAD_AREA:
-		ret = put_user(task_thread_info(child)->tp_value, datap);
-		break;
-
-		default:
-			ret = ptrace_request(child, request, addr, data);
-			break;
-	}
-	return ret;
-}
-
-asmlinkage int syscall_trace_enter(void)
-{
-	int ret = 0;
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		ret = tracehook_report_syscall_entry(task_pt_regs(current));
-	return ret;
-}
-
-asmlinkage void syscall_trace_leave(void)
-{
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(task_pt_regs(current), 0);
-}
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index ca3df0dc7e88..7dc186b7a85f 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
+#include <linux/rtc.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -47,7 +48,9 @@ EXPORT_SYMBOL(memory_end);
 char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
+void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
 int (*mach_set_clock_mmss)(unsigned long);
+int (*mach_hwclk) (int, struct rtc_time*);
 
 /* machine dependent reboot functions */
 void (*mach_reset)(void);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 75ab79b3bdeb..d7deb7fc7eb5 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -1,5 +1,111 @@
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "time_mm.c"
-#else
-#include "time_no.c"
-#endif
+/*
+ *  linux/arch/m68k/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *
+ * This file contains the m68k-specific time handling details.
+ * Most of the stuff is located in the machine specific files.
+ *
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/irq_regs.h>
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/profile.h>
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "xtime_update()" routine every clocktick
+ */
+static irqreturn_t timer_interrupt(int irq, void *dummy)
+{
+	xtime_update(1);
+	update_process_times(user_mode(get_irq_regs()));
+	profile_tick(CPU_PROFILING);
+
+#ifdef CONFIG_HEARTBEAT
+	/* use power LED as a heartbeat instead -- much more useful
+	   for debugging -- based on the version for PReP by Cort */
+	/* acts like an actual heart beat -- ie thump-thump-pause... */
+	if (mach_heartbeat) {
+	    static unsigned cnt = 0, period = 0, dist = 0;
+
+	    if (cnt == 0 || cnt == dist)
+		mach_heartbeat( 1 );
+	    else if (cnt == 7 || cnt == dist+7)
+		mach_heartbeat( 0 );
+
+	    if (++cnt > period) {
+		cnt = 0;
+		/* The hyperbolic function below modifies the heartbeat period
+		 * length in dependency of the current (5min) load. It goes
+		 * through the points f(0)=126, f(1)=86, f(5)=51,
+		 * f(inf)->30. */
+		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
+		dist = period / 4;
+	    }
+	}
+#endif /* CONFIG_HEARTBEAT */
+	return IRQ_HANDLED;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	struct rtc_time time;
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
+
+	if (mach_hwclk) {
+		mach_hwclk(0, &time);
+
+		if ((time.tm_year += 1900) < 1970)
+			time.tm_year += 100;
+		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
+				      time.tm_hour, time.tm_min, time.tm_sec);
+	}
+}
+
+void __init time_init(void)
+{
+	mach_sched_init(timer_interrupt);
+}
+
+#ifdef CONFIG_M68KCLASSIC
+
+u32 arch_gettimeoffset(void)
+{
+	return mach_gettimeoffset() * 1000;
+}
+
+static int __init rtc_init(void)
+{
+	struct platform_device *pdev;
+
+	if (!mach_hwclk)
+		return -ENODEV;
+
+	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
+}
+
+module_init(rtc_init);
+
+#endif /* CONFIG_M68KCLASSIC */
diff --git a/arch/m68k/kernel/time_mm.c b/arch/m68k/kernel/time_mm.c
deleted file mode 100644
index 18b34ee5db3b..000000000000
--- a/arch/m68k/kernel/time_mm.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  linux/arch/m68k/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/rtc.h>
-#include <linux/platform_device.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-  if (mach_set_clock_mmss)
-    return mach_set_clock_mmss (nowtime);
-  return -1;
-}
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-static irqreturn_t timer_interrupt(int irq, void *dummy)
-{
-	xtime_update(1);
-	update_process_times(user_mode(get_irq_regs()));
-	profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-	return IRQ_HANDLED;
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	struct rtc_time time;
-	ts->tv_sec = 0;
-	ts->tv_nsec = 0;
-
-	if (mach_hwclk) {
-		mach_hwclk(0, &time);
-
-		if ((time.tm_year += 1900) < 1970)
-			time.tm_year += 100;
-		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
-				      time.tm_hour, time.tm_min, time.tm_sec);
-	}
-}
-
-void __init time_init(void)
-{
-	mach_sched_init(timer_interrupt);
-}
-
-u32 arch_gettimeoffset(void)
-{
-	return mach_gettimeoffset() * 1000;
-}
-
-static int __init rtc_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!mach_hwclk)
-		return -ENODEV;
-
-	pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-module_init(rtc_init);
diff --git a/arch/m68k/kernel/time_no.c b/arch/m68k/kernel/time_no.c
deleted file mode 100644
index 3ef0f7768dcd..000000000000
--- a/arch/m68k/kernel/time_no.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  linux/arch/m68knommu/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/profile.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-
-#include <asm/machdep.h>
-#include <asm/irq_regs.h>
-
-#define	TICK_SIZE (tick_nsec / 1000)
-
-/* machine dependent timer functions */
-void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
-
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	if (mach_set_clock_mmss)
-		return mach_set_clock_mmss (nowtime);
-	return -1;
-}
-
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-irqreturn_t arch_timer_interrupt(int irq, void *dummy)
-{
-
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-
-	xtime_update(1);
-
-	update_process_times(user_mode(get_irq_regs()));
-
-	return(IRQ_HANDLED);
-}
-#endif
-
-static unsigned long read_rtc_mmss(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	if (mach_gettod) {
-		mach_gettod(&year, &mon, &day, &hour, &min, &sec);
-		if ((year += 1900) < 1970)
-			year += 100;
-	} else {
-		year = 1970;
-		mon = day = 1;
-		hour = min = sec = 0;
-	}
-
-
-	return  mktime(year, mon, day, hour, min, sec);
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
-	ts->tv_sec = read_rtc_mmss();
-	ts->tv_nsec = 0;
-}
-
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
-
-void time_init(void)
-{
-	hw_timer_init();
-}
diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 8e66ccb0935e..40e02d9c38b4 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -1,195 +1,93 @@
 /*
  *	vmlinux.lds.S -- master linker script for m68knommu arch
  *
- *	(C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com>
+ *	(C) Copyright 2002-2012, Greg Ungerer <gerg@snapgear.com>
  *
  *	This linker script is equipped to build either ROM loaded or RAM
  *	run kernels.
  */
 
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-#include <asm/thread_info.h>
-
 #if defined(CONFIG_RAMKERNEL)
-#define	RAM_START	CONFIG_KERNELBASE
-#define	RAM_LENGTH	(CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
-#define	TEXT		ram
-#define	DATA		ram
-#define	INIT		ram
-#define	BSSS		ram
-#endif
-#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
-#define	RAM_START	CONFIG_RAMBASE
-#define	RAM_LENGTH	CONFIG_RAMSIZE
-#define	ROMVEC_START	CONFIG_ROMVEC
-#define	ROMVEC_LENGTH	CONFIG_ROMVECSIZE
-#define	ROM_START	CONFIG_ROMSTART
-#define	ROM_LENGTH	CONFIG_ROMSIZE
-#define	TEXT		rom
-#define	DATA		ram
-#define	INIT		ram
-#define	BSSS		ram
+#define	KTEXT_ADDR	CONFIG_KERNELBASE
 #endif
-
-#ifndef DATA_ADDR
-#define	DATA_ADDR
+#if defined(CONFIG_ROMKERNEL)
+#define	KTEXT_ADDR	CONFIG_ROMSTART
+#define	KDATA_ADDR	CONFIG_KERNELBASE
+#define	LOAD_OFFSET	KDATA_ADDR + (ADDR(.text) + SIZEOF(.text))
 #endif
 
+#include <asm/page.h>
+#include <asm/thread_info.h>
+#include <asm-generic/vmlinux.lds.h>
 
 OUTPUT_ARCH(m68k)
 ENTRY(_start)
 
-MEMORY {
-	ram	: ORIGIN = RAM_START, LENGTH = RAM_LENGTH
-#ifdef ROM_START
-	romvec	: ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
-	rom	: ORIGIN = ROM_START, LENGTH = ROM_LENGTH
-#endif
-}
-
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
 
-#ifdef ROMVEC_START
-	. = ROMVEC_START ;
+#ifdef CONFIG_ROMVEC
+	. = CONFIG_ROMVEC;
 	.romvec : {
-		__rom_start = . ;
+		__rom_start = .;
 		_romvec = .;
+		*(.romvec)
 		*(.data..initvect)
-	} > romvec
+	}
 #endif
 
+	. = KTEXT_ADDR;
+
+	_text = .;
+	_stext = .;
 	.text : {
-		_text = .;
-		_stext = . ;
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-		*(.text..lock)
 		*(.fixup)
+		. = ALIGN(16);
+	}
+	_etext = .;
+
+#ifdef KDATA_ADDR
+	. = KDATA_ADDR;
+#endif
+
+	_sdata = .;
+	RO_DATA_SECTION(PAGE_SIZE)
+	RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
+	_edata = .;
 
-		. = ALIGN(16);          /* Exception table              */
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-
-		*(.rodata) *(.rodata.*)
-		*(__vermagic)		/* Kernel version magic */
-		*(.rodata1)
-		*(.rodata.str1.1)
-
-		/* Kernel symbol table: Normal symbols */
-		. = ALIGN(4);
-		__start___ksymtab = .;
-		*(SORT(___ksymtab+*))
-		__stop___ksymtab = .;
-
-		/* Kernel symbol table: GPL-only symbols */
-		__start___ksymtab_gpl = .;
-		*(SORT(___ksymtab_gpl+*))
-		__stop___ksymtab_gpl = .;
-
-		/* Kernel symbol table: Normal unused symbols */
-		__start___ksymtab_unused = .;
-		*(SORT(___ksymtab_unused+*))
-		__stop___ksymtab_unused = .;
-
-		/* Kernel symbol table: GPL-only unused symbols */
-		__start___ksymtab_unused_gpl = .;
-		*(SORT(___ksymtab_unused_gpl+*))
-		__stop___ksymtab_unused_gpl = .;
-
-		/* Kernel symbol table: GPL-future symbols */
-		__start___ksymtab_gpl_future = .;
-		*(SORT(___ksymtab_gpl_future+*))
-		__stop___ksymtab_gpl_future = .;
-
-		/* Kernel symbol table: Normal symbols */
-		__start___kcrctab = .;
-		*(SORT(___kcrctab+*))
-		__stop___kcrctab = .;
-
-		/* Kernel symbol table: GPL-only symbols */
-		__start___kcrctab_gpl = .;
-		*(SORT(___kcrctab_gpl+*))
-		__stop___kcrctab_gpl = .;
-
-		/* Kernel symbol table: Normal unused symbols */
-		__start___kcrctab_unused = .;
-		*(SORT(___kcrctab_unused+*))
-		__stop___kcrctab_unused = .;
-
-		/* Kernel symbol table: GPL-only unused symbols */
-		__start___kcrctab_unused_gpl = .;
-		*(SORT(___kcrctab_unused_gpl+*))
-		__stop___kcrctab_unused_gpl = .;
-
-		/* Kernel symbol table: GPL-future symbols */
-		__start___kcrctab_gpl_future = .;
-		*(SORT(___kcrctab_gpl_future+*))
-		__stop___kcrctab_gpl_future = .;
-
-		/* Kernel symbol table: strings */
-		*(__ksymtab_strings)
-
-		/* Built-in module parameters */
-		. = ALIGN(4) ;
-		__start___param = .;
-		*(__param)
-		__stop___param = .;
-
-		/* Built-in module versions */
-		. = ALIGN(4) ;
-		__start___modver = .;
-		*(__modver)
-		__stop___modver = .;
-
-		. = ALIGN(4) ;
-		_etext = . ;
-	} > TEXT
-
-	.data DATA_ADDR : {
-		. = ALIGN(4);
-		_sdata = . ;
-		DATA_DATA
-		CACHELINE_ALIGNED_DATA(32)
-		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		*(.data..shared_aligned)
-		INIT_TASK_DATA(THREAD_SIZE)
-		_edata = . ;
-	} > DATA
+	EXCEPTION_TABLE(16)
+	NOTES
 
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+	PERCPU_SECTION(16)
 	.m68k_fixup : {
 		__start_fixup = .;
 		*(.m68k_fixup)
 		__stop_fixup = .;
-	} > DATA
-	NOTES > DATA
-
-	.init.text : {
-		. = ALIGN(PAGE_SIZE);
-		__init_begin = .;
-	} > INIT
-	INIT_TEXT_SECTION(PAGE_SIZE) > INIT
-	INIT_DATA_SECTION(16) > INIT
+	}
 	.init.data : {
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
-	} > INIT
-
-	.bss : {
-		. = ALIGN(4);
-		_sbss = . ;
-		*(.bss)
-		*(COMMON)
-		. = ALIGN(4) ;
-		_ebss = . ;
-	 	_end = . ;
-	} > BSSS
+	}
+
+	_sbss = .;
+	BSS_SECTION(0, 0, 0)
+	_ebss = .;
+
+	_end = .;
+
+	STABS_DEBUG
+	.comment 0 : { *(.comment) }
 
+	/* Sections to be discarded */
 	DISCARDS
 }
 
diff --git a/arch/m68k/platform/5206/config.c b/arch/m68k/platform/5206/config.c
index 6fa3f800277a..6bfbeebd231b 100644
--- a/arch/m68k/platform/5206/config.c
+++ b/arch/m68k/platform/5206/config.c
@@ -16,83 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-static struct mcf_platform_uart m5206_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
-	},
-	{ },
-};
-
-static struct platform_device m5206_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m5206_uart_platform,
-};
-
-static struct platform_device *m5206_devices[] __initdata = {
-	&m5206_uart,
-};
-
-/***************************************************************************/
-
-static void __init m5206_uart_init_line(int line, int irq)
-{
-	if (line == 0) {
-		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART0);
-	} else if (line == 1) {
-		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART1);
-	}
-}
-
-static void __init m5206_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m5206_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m5206_uart_init_line(line, m5206_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void __init m5206_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
-void m5206_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
 
 /***************************************************************************/
 
@@ -104,9 +27,7 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif /* CONFIG_NETtel */
 
-	mach_reset = m5206_cpu_reset;
-	m5206_timers_init();
-	m5206_uarts_init();
+	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);
@@ -115,13 +36,3 @@ void __init config_BSP(char *commandp, int size)
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c
index 8a98683f1b15..235947844f27 100644
--- a/arch/m68k/platform/520x/config.c
+++ b/arch/m68k/platform/520x/config.c
@@ -15,194 +15,14 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m520x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART2,
-	},
-	{ },
-};
-
-static struct platform_device m520x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m520x_uart_platform,
-};
-
-static struct resource m520x_fec_resources[] = {
-	{
-		.start		= MCFFEC_BASE,
-		.end		= MCFFEC_BASE + MCFFEC_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 36,
-		.end		= 64 + 36,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 40,
-		.end		= 64 + 40,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 42,
-		.end		= 64 + 42,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m520x_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m520x_fec_resources),
-	.resource		= m520x_fec_resources,
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m520x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    46
-#define MCFQSPI_CS1    47
-#define MCFQSPI_CS2    27
-
-static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	return 0;
-
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-	}
-}
-
-static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-	}
-}
-
-static struct mcfqspi_cs_control m520x_cs_control = {
-	.setup                  = m520x_cs_setup,
-	.teardown               = m520x_cs_teardown,
-	.select                 = m520x_cs_select,
-	.deselect               = m520x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m520x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 3,
-	.cs_control		= &m520x_cs_control,
-};
-
-static struct platform_device m520x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m520x_qspi_resources),
-	.resource		= m520x_qspi_resources,
-	.dev.platform_data	= &m520x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m520x_qspi_init(void)
 {
@@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void)
 	par &= 0x00ff;
 	writew(par, MCF_GPIO_PAR_UART);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
-
 
-static struct platform_device *m520x_devices[] __initdata = {
-	&m520x_uart,
-	&m520x_fec,
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m520x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
-static void __init m520x_uart_init_line(int line, int irq)
+static void __init m520x_uarts_init(void)
 {
 	u16 par;
 	u8 par2;
 
-	switch (line) {
-	case 0:
-		par = readw(MCF_GPIO_PAR_UART);
-		par |= MCF_GPIO_PAR_UART_PAR_UTXD0 |
-		       MCF_GPIO_PAR_UART_PAR_URXD0;
-		writew(par, MCF_GPIO_PAR_UART);
-		break;
-	case 1:
-		par = readw(MCF_GPIO_PAR_UART);
-		par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
-		       MCF_GPIO_PAR_UART_PAR_URXD1;
-		writew(par, MCF_GPIO_PAR_UART);
-		break;
-	case 2:
-		par2 = readb(MCF_GPIO_PAR_FECI2C);
-		par2 &= ~0x0F;
-		par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
-			MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
-		writeb(par2, MCF_GPIO_PAR_FECI2C);
-		break;
-	}
-}
-
-static void __init m520x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m520x_uart_platform);
-	int line;
+	/* UART0 and UART1 GPIO pin setup */
+	par = readw(MCF_GPIO_PAR_UART);
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
+	writew(par, MCF_GPIO_PAR_UART);
 
-	for (line = 0; (line < nrlines); line++)
-		m520x_uart_init_line(line, m520x_uart_platform[line].irq);
+	/* UART1 GPIO pin setup */
+	par2 = readb(MCF_GPIO_PAR_FECI2C);
+	par2 &= ~0x0F;
+	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+	writeb(par2, MCF_GPIO_PAR_FECI2C);
 }
 
 /***************************************************************************/
@@ -280,32 +74,14 @@ static void __init m520x_fec_init(void)
 
 /***************************************************************************/
 
-static void m520x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m520x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m520x_uarts_init();
 	m520x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m520x_qspi_init();
 #endif
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/523x/config.c b/arch/m68k/platform/523x/config.c
index 71f4436ec809..c8b405d5a961 100644
--- a/arch/m68k/platform/523x/config.c
+++ b/arch/m68k/platform/523x/config.c
@@ -16,215 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m523x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
-	},
-	{ },
-};
-
-static struct platform_device m523x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m523x_uart_platform,
-};
-
-static struct resource m523x_fec_resources[] = {
-	{
-		.start		= MCFFEC_BASE,
-		.end		= MCFFEC_BASE + MCFFEC_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 23,
-		.end		= 64 + 23,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 27,
-		.end		= 64 + 27,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 29,
-		.end		= 64 + 29,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m523x_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m523x_fec_resources),
-	.resource		= m523x_fec_resources,
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m523x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    91
-#define MCFQSPI_CS1    92
-#define MCFQSPI_CS2    103
-#define MCFQSPI_CS3    99
-
-static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, cs_high);
-		break;
-	}
-}
-
-static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, !cs_high);
-		break;
-	}
-}
-
-static struct mcfqspi_cs_control m523x_cs_control = {
-	.setup                  = m523x_cs_setup,
-	.teardown               = m523x_cs_teardown,
-	.select                 = m523x_cs_select,
-	.deselect               = m523x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m523x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m523x_cs_control,
-};
-
-static struct platform_device m523x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m523x_qspi_resources),
-	.resource		= m523x_qspi_resources,
-	.dev.platform_data	= &m523x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m523x_qspi_init(void)
 {
@@ -237,15 +35,8 @@ static void __init m523x_qspi_init(void)
 	par &= 0x3f3f;
 	writew(par, MCFGPIO_PAR_TIMER);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-static struct platform_device *m523x_devices[] __initdata = {
-	&m523x_uart,
-	&m523x_fec,
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m523x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
@@ -263,31 +54,13 @@ static void __init m523x_fec_init(void)
 
 /***************************************************************************/
 
-static void m523x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m523x_cpu_reset;
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
+	mach_sched_init = hw_timer_init;
 	m523x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m523x_qspi_init();
 #endif
-	platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
-	return 0;
 }
 
-arch_initcall(init_BSP);
-
 /***************************************************************************/
diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c
index ceb31e5744a6..bbf05135bb98 100644
--- a/arch/m68k/platform/5249/config.c
+++ b/arch/m68k/platform/5249/config.c
@@ -12,34 +12,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
+#include <linux/platform_device.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m5249_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
-	},
-	{ },
-};
-
-static struct platform_device m5249_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m5249_uart_platform,
-};
-
 #ifdef CONFIG_M5249C3
 
 static struct resource m5249_smc91x_resources[] = {
@@ -64,153 +43,15 @@ static struct platform_device m5249_smc91x = {
 
 #endif /* CONFIG_M5249C3 */
 
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m5249_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_QSPI,
-		.end		= MCF_IRQ_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    29
-#define MCFQSPI_CS1    24
-#define MCFQSPI_CS2    21
-#define MCFQSPI_CS3    22
-
-static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, cs_high);
-		break;
-	}
-}
-
-static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, !cs_high);
-		break;
-	}
-}
-
-static struct mcfqspi_cs_control m5249_cs_control = {
-	.setup                  = m5249_cs_setup,
-	.teardown               = m5249_cs_teardown,
-	.select                 = m5249_cs_select,
-	.deselect               = m5249_cs_deselect,
+static struct platform_device *m5249_devices[] __initdata = {
+#ifdef CONFIG_M5249C3
+	&m5249_smc91x,
+#endif
 };
 
-static struct mcfqspi_platform_data m5249_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m5249_cs_control,
-};
+/***************************************************************************/
 
-static struct platform_device m5249_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m5249_qspi_resources),
-	.resource		= m5249_qspi_resources,
-	.dev.platform_data	= &m5249_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m5249_qspi_init(void)
 {
@@ -219,42 +60,8 @@ static void __init m5249_qspi_init(void)
 	       MCF_MBAR + MCFSIM_QSPIICR);
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-
-static struct platform_device *m5249_devices[] __initdata = {
-	&m5249_uart,
-#ifdef CONFIG_M5249C3
-	&m5249_smc91x,
-#endif
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m5249_qspi,
-#endif
-};
-
-/***************************************************************************/
-
-static void __init m5249_uart_init_line(int line, int irq)
-{
-	if (line == 0) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART0);
-	} else if (line == 1) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART1);
-	}
-}
-
-static void __init m5249_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m5249_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m5249_uart_init_line(line, m5249_uart_platform[line].irq);
-}
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
@@ -276,43 +83,14 @@ static void __init m5249_smc91x_init(void)
 
 /***************************************************************************/
 
-static void __init m5249_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
-void m5249_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m5249_cpu_reset;
-	m5249_timers_init();
-	m5249_uarts_init();
+	mach_sched_init = hw_timer_init;
+
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m5249_qspi_init();
 #endif
 }
diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c
index 65bb582734e1..e68bc7a148eb 100644
--- a/arch/m68k/platform/5272/config.c
+++ b/arch/m68k/platform/5272/config.c
@@ -30,84 +30,18 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m5272_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= MCF_IRQ_UART1,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= MCF_IRQ_UART2,
-	},
-	{ },
-};
-
-static struct platform_device m5272_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m5272_uart_platform,
-};
-
-static struct resource m5272_fec_resources[] = {
-	{
-		.start		= MCF_MBAR + 0x840,
-		.end		= MCF_MBAR + 0x840 + 0x1cf,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCF_IRQ_ERX,
-		.end		= MCF_IRQ_ERX,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_ETX,
-		.end		= MCF_IRQ_ETX,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= MCF_IRQ_ENTC,
-		.end		= MCF_IRQ_ENTC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m5272_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m5272_fec_resources),
-	.resource		= m5272_fec_resources,
-};
-
-static struct platform_device *m5272_devices[] __initdata = {
-	&m5272_uart,
-	&m5272_fec,
-};
-
-/***************************************************************************/
-
-static void __init m5272_uart_init_line(int line, int irq)
+static void __init m5272_uarts_init(void)
 {
 	u32 v;
 
-	if ((line >= 0) && (line < 2)) {
-		/* Enable the output lines for the serial ports */
-		v = readl(MCF_MBAR + MCFSIM_PBCNT);
-		v = (v & ~0x000000ff) | 0x00000055;
-		writel(v, MCF_MBAR + MCFSIM_PBCNT);
-
-		v = readl(MCF_MBAR + MCFSIM_PDCNT);
-		v = (v & ~0x000003fc) | 0x000002a8;
-		writel(v, MCF_MBAR + MCFSIM_PDCNT);
-	}
-}
-
-static void __init m5272_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m5272_uart_platform);
-	int line;
+	/* Enable the output lines for the serial ports */
+	v = readl(MCF_MBAR + MCFSIM_PBCNT);
+	v = (v & ~0x000000ff) | 0x00000055;
+	writel(v, MCF_MBAR + MCFSIM_PBCNT);
 
-	for (line = 0; (line < nrlines); line++)
-		m5272_uart_init_line(line, m5272_uart_platform[line].irq);
+	v = readl(MCF_MBAR + MCFSIM_PDCNT);
+	v = (v & ~0x000003fc) | 0x000002a8;
+	writel(v, MCF_MBAR + MCFSIM_PDCNT);
 }
 
 /***************************************************************************/
@@ -146,6 +80,7 @@ void __init config_BSP(char *commandp, int size)
 #endif
 
 	mach_reset = m5272_cpu_reset;
+	mach_sched_init = hw_timer_init;
 }
 
 /***************************************************************************/
@@ -167,7 +102,6 @@ static int __init init_BSP(void)
 {
 	m5272_uarts_init();
 	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
-	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }
 
diff --git a/arch/m68k/platform/527x/config.c b/arch/m68k/platform/527x/config.c
index 3ebc769cefda..7ed848c3b848 100644
--- a/arch/m68k/platform/527x/config.c
+++ b/arch/m68k/platform/527x/config.c
@@ -16,253 +16,14 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m527x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART2,
-	},
-	{ },
-};
-
-static struct platform_device m527x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m527x_uart_platform,
-};
-
-static struct resource m527x_fec0_resources[] = {
-	{
-		.start		= MCFFEC_BASE0,
-		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 23,
-		.end		= 64 + 23,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 27,
-		.end		= 64 + 27,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 29,
-		.end		= 64 + 29,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource m527x_fec1_resources[] = {
-	{
-		.start		= MCFFEC_BASE1,
-		.end		= MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 128 + 23,
-		.end		= 128 + 23,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 128 + 27,
-		.end		= 128 + 27,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 128 + 29,
-		.end		= 128 + 29,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m527x_fec[] = {
-	{
-		.name		= "fec",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(m527x_fec0_resources),
-		.resource	= m527x_fec0_resources,
-	},
-	{
-		.name		= "fec",
-		.id		= 1,
-		.num_resources	= ARRAY_SIZE(m527x_fec1_resources),
-		.resource	= m527x_fec1_resources,
-	},
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m527x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#if defined(CONFIG_M5271)
-#define MCFQSPI_CS0    91
-#define MCFQSPI_CS1    92
-#define MCFQSPI_CS2    99
-#define MCFQSPI_CS3    103
-#elif defined(CONFIG_M5275)
-#define MCFQSPI_CS0    59
-#define MCFQSPI_CS1    60
-#define MCFQSPI_CS2    61
-#define MCFQSPI_CS3    62
-#endif
-
-static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, cs_high);
-		break;
-	}
-}
-
-static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	switch (chip_select) {
-	case 0:
-		gpio_set_value(MCFQSPI_CS0, !cs_high);
-		break;
-	case 1:
-		gpio_set_value(MCFQSPI_CS1, !cs_high);
-		break;
-	case 2:
-		gpio_set_value(MCFQSPI_CS2, !cs_high);
-		break;
-	case 3:
-		gpio_set_value(MCFQSPI_CS3, !cs_high);
-		break;
-	}
-}
-
-static struct mcfqspi_cs_control m527x_cs_control = {
-	.setup                  = m527x_cs_setup,
-	.teardown               = m527x_cs_teardown,
-	.select                 = m527x_cs_select,
-	.deselect               = m527x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m527x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m527x_cs_control,
-};
-
-static struct platform_device m527x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m527x_qspi_resources),
-	.resource		= m527x_qspi_resources,
-	.dev.platform_data	= &m527x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m527x_qspi_init(void)
 {
@@ -280,50 +41,23 @@ static void __init m527x_qspi_init(void)
 	writew(0x003e, MCFGPIO_PAR_QSPI);
 #endif
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-static struct platform_device *m527x_devices[] __initdata = {
-	&m527x_uart,
-	&m527x_fec[0],
-#ifdef CONFIG_FEC2
-	&m527x_fec[1],
-#endif
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m527x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
-static void __init m527x_uart_init_line(int line, int irq)
+static void __init m527x_uarts_init(void)
 {
 	u16 sepmask;
 
-	if ((line < 0) || (line > 2))
-		return;
-
 	/*
 	 * External Pin Mask Setting & Enable External Pin for Interface
 	 */
 	sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
-	if (line == 0)
-		sepmask |= UART0_ENABLE_MASK;
-	else if (line == 1)
-		sepmask |= UART1_ENABLE_MASK;
-	else if (line == 2)
-		sepmask |= UART2_ENABLE_MASK;
+	sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
 	writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
 }
 
-static void __init m527x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m527x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m527x_uart_init_line(line, m527x_uart_platform[line].irq);
-}
-
 /***************************************************************************/
 
 static void __init m527x_fec_init(void)
@@ -353,32 +87,14 @@ static void __init m527x_fec_init(void)
 
 /***************************************************************************/
 
-static void m527x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m527x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m527x_qspi_init();
 #endif
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/528x/config.c b/arch/m68k/platform/528x/config.c
index 7abe77a2f3e3..d4492926614c 100644
--- a/arch/m68k/platform/528x/config.c
+++ b/arch/m68k/platform/528x/config.c
@@ -17,229 +17,33 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m528x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
-	},
-	{ },
-};
-
-static struct platform_device m528x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m528x_uart_platform,
-};
-
-static struct resource m528x_fec_resources[] = {
-	{
-		.start		= MCFFEC_BASE,
-		.end		= MCFFEC_BASE + MCFFEC_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 23,
-		.end		= 64 + 23,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 27,
-		.end		= 64 + 27,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 29,
-		.end		= 64 + 29,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m528x_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m528x_fec_resources),
-	.resource		= m528x_fec_resources,
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m528x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    147
-#define MCFQSPI_CS1    148
-#define MCFQSPI_CS2    149
-#define MCFQSPI_CS3    150
-
-static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
-		goto fail3;
-	}
-	status = gpio_direction_output(MCFQSPI_CS3, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
-		goto fail4;
-	}
-
-	return 0;
-
-fail4:
-	gpio_free(MCFQSPI_CS3);
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS3);
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
-}
-
-static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
-}
-
-static struct mcfqspi_cs_control m528x_cs_control = {
-	.setup                  = m528x_cs_setup,
-	.teardown               = m528x_cs_teardown,
-	.select                 = m528x_cs_select,
-	.deselect               = m528x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m528x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 4,
-	.cs_control		= &m528x_cs_control,
-};
-
-static struct platform_device m528x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m528x_qspi_resources),
-	.resource		= m528x_qspi_resources,
-	.dev.platform_data	= &m528x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m528x_qspi_init(void)
 {
 	/* setup Port QS for QSPI with gpio CS control */
 	__raw_writeb(0x07, MCFGPIO_PQSPAR);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-static struct platform_device *m528x_devices[] __initdata = {
-	&m528x_uart,
-	&m528x_fec,
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m528x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
-static void __init m528x_uart_init_line(int line, int irq)
+static void __init m528x_uarts_init(void)
 {
 	u8 port;
 
-	if ((line < 0) || (line > 2))
-		return;
-
 	/* make sure PUAPAR is set for UART0 and UART1 */
-	if (line < 2) {
-		port = readb(MCF5282_GPIO_PUAPAR);
-		port |= (0x03 << (line * 2));
-		writeb(port, MCF5282_GPIO_PUAPAR);
-	}
-}
-
-static void __init m528x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m528x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m528x_uart_init_line(line, m528x_uart_platform[line].irq);
+	port = readb(MCF5282_GPIO_PUAPAR);
+	port |= 0x03 | (0x03 << 2);
+	writeb(port, MCF5282_GPIO_PUAPAR);
 }
 
 /***************************************************************************/
@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void)
 
 /***************************************************************************/
 
-static void m528x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
-}
-
-/***************************************************************************/
-
 #ifdef CONFIG_WILDFIRE
 void wildfire_halt(void)
 {
@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size)
 #ifdef CONFIG_WILDFIREMOD
 	mach_halt = wildfiremod_halt;
 #endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	mach_reset = m528x_cpu_reset;
+	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 	m528x_qspi_init();
 #endif
-	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
-	return 0;
 }
 
-arch_initcall(init_BSP);
-
 /***************************************************************************/
diff --git a/arch/m68k/platform/5307/config.c b/arch/m68k/platform/5307/config.c
index 00900ac06a9c..a568d2870d15 100644
--- a/arch/m68k/platform/5307/config.c
+++ b/arch/m68k/platform/5307/config.c
@@ -16,7 +16,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
 #include <asm/mcfwdebug.h>
 
 /***************************************************************************/
@@ -29,82 +28,6 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m5307_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
-	},
-	{ },
-};
-
-static struct platform_device m5307_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m5307_uart_platform,
-};
-
-static struct platform_device *m5307_devices[] __initdata = {
-	&m5307_uart,
-};
-
-/***************************************************************************/
-
-static void __init m5307_uart_init_line(int line, int irq)
-{
-	if (line == 0) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART0);
-	} else if (line == 1) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART1);
-	}
-}
-
-static void __init m5307_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m5307_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m5307_uart_init_line(line, m5307_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void __init m5307_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
-void m5307_cpu_reset(void)
-{
-	local_irq_disable();
-	/* Set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #if defined(CONFIG_NETtel) || \
@@ -114,9 +37,7 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif
 
-	mach_reset = m5307_cpu_reset;
-	m5307_timers_init();
-	m5307_uarts_init();
+	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);
@@ -135,13 +56,3 @@ void __init config_BSP(char *commandp, int size)
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/532x/config.c b/arch/m68k/platform/532x/config.c
index ca51323f957b..2bec3477b739 100644
--- a/arch/m68k/platform/532x/config.c
+++ b/arch/m68k/platform/532x/config.c
@@ -21,214 +21,33 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfwdebug.h>
-#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m532x_uart_platform[] = {
-	{
-		.mapbase	= MCFUART_BASE1,
-		.irq		= MCFINT_VECBASE + MCFINT_UART0,
-	},
-	{
-		.mapbase 	= MCFUART_BASE2,
-		.irq		= MCFINT_VECBASE + MCFINT_UART1,
-	},
-	{
-		.mapbase 	= MCFUART_BASE3,
-		.irq		= MCFINT_VECBASE + MCFINT_UART2,
-	},
-	{ },
-};
-
-static struct platform_device m532x_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m532x_uart_platform,
-};
-
-static struct resource m532x_fec_resources[] = {
-	{
-		.start		= 0xfc030000,
-		.end		= 0xfc0307ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 64 + 36,
-		.end		= 64 + 36,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 40,
-		.end		= 64 + 40,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= 64 + 42,
-		.end		= 64 + 42,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m532x_fec = {
-	.name			= "fec",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m532x_fec_resources),
-	.resource		= m532x_fec_resources,
-};
-
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-static struct resource m532x_qspi_resources[] = {
-	{
-		.start		= MCFQSPI_IOBASE,
-		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= MCFINT_VECBASE + MCFINT_QSPI,
-		.end		= MCFINT_VECBASE + MCFINT_QSPI,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#define MCFQSPI_CS0    84
-#define MCFQSPI_CS1    85
-#define MCFQSPI_CS2    86
-
-static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control)
-{
-	int status;
-
-	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
-		goto fail0;
-	}
-	status = gpio_direction_output(MCFQSPI_CS0, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
-		goto fail1;
-	}
-
-	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
-		goto fail1;
-	}
-	status = gpio_direction_output(MCFQSPI_CS1, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
-		goto fail2;
-	}
-
-	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
-	if (status) {
-		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
-		goto fail2;
-	}
-	status = gpio_direction_output(MCFQSPI_CS2, 1);
-	if (status) {
-		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
-		goto fail3;
-	}
-
-	return 0;
-
-fail3:
-	gpio_free(MCFQSPI_CS2);
-fail2:
-	gpio_free(MCFQSPI_CS1);
-fail1:
-	gpio_free(MCFQSPI_CS0);
-fail0:
-	return status;
-}
-
-static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control)
-{
-	gpio_free(MCFQSPI_CS2);
-	gpio_free(MCFQSPI_CS1);
-	gpio_free(MCFQSPI_CS0);
-}
-
-static void m532x_cs_select(struct mcfqspi_cs_control *cs_control,
-			    u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
-}
-
-static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control,
-			      u8 chip_select, bool cs_high)
-{
-	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
-}
-
-static struct mcfqspi_cs_control m532x_cs_control = {
-	.setup                  = m532x_cs_setup,
-	.teardown               = m532x_cs_teardown,
-	.select                 = m532x_cs_select,
-	.deselect               = m532x_cs_deselect,
-};
-
-static struct mcfqspi_platform_data m532x_qspi_data = {
-	.bus_num		= 0,
-	.num_chipselect		= 3,
-	.cs_control		= &m532x_cs_control,
-};
-
-static struct platform_device m532x_qspi = {
-	.name			= "mcfqspi",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(m532x_qspi_resources),
-	.resource		= m532x_qspi_resources,
-	.dev.platform_data	= &m532x_qspi_data,
-};
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
 
 static void __init m532x_qspi_init(void)
 {
 	/* setup QSPS pins for QSPI with gpio CS control */
 	writew(0x01f0, MCF_GPIO_PAR_QSPI);
 }
-#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
-
-static struct platform_device *m532x_devices[] __initdata = {
-	&m532x_uart,
-	&m532x_fec,
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	&m532x_qspi,
-#endif
-};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
 
 /***************************************************************************/
 
-static void __init m532x_uart_init_line(int line, int irq)
-{
-	if (line == 0) {
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x000F;
-	} else if (line == 1) {
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x0FF0;
-	}
-}
-
 static void __init m532x_uarts_init(void)
 {
-	const int nrlines = ARRAY_SIZE(m532x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m532x_uart_init_line(line, m532x_uart_platform[line].irq);
+	/* UART GPIO initialization */
+	MCF_GPIO_PAR_UART |= 0x0FFF;
 }
+
 /***************************************************************************/
 
 static void __init m532x_fec_init(void)
@@ -242,14 +61,6 @@ static void __init m532x_fec_init(void)
 
 /***************************************************************************/
 
-static void m532x_cpu_reset(void)
-{
-	local_irq_disable();
-	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
-}
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #if !defined(CONFIG_BOOTPARAM)
@@ -263,6 +74,13 @@ void __init config_BSP(char *commandp, int size)
 	}
 #endif
 
+	mach_sched_init = hw_timer_init;
+	m532x_uarts_init();
+	m532x_fec_init();
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
+	m532x_qspi_init();
+#endif
+
 #ifdef CONFIG_BDM_DISABLE
 	/*
 	 * Disable the BDM clocking.  This also turns off most of the rest of
@@ -274,21 +92,6 @@ void __init config_BSP(char *commandp, int size)
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	m532x_uarts_init();
-	m532x_fec_init();
-#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
-	m532x_qspi_init();
-#endif
-	platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
 /* Board initialization */
 /***************************************************************************/
 /* 
diff --git a/arch/m68k/platform/5407/config.c b/arch/m68k/platform/5407/config.c
index 70ea789a400c..bb6c746ae819 100644
--- a/arch/m68k/platform/5407/config.c
+++ b/arch/m68k/platform/5407/config.c
@@ -16,91 +16,12 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-static struct mcf_platform_uart m5407_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
-	},
-	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
-	},
-	{ },
-};
-
-static struct platform_device m5407_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m5407_uart_platform,
-};
-
-static struct platform_device *m5407_devices[] __initdata = {
-	&m5407_uart,
-};
-
-/***************************************************************************/
-
-static void __init m5407_uart_init_line(int line, int irq)
-{
-	if (line == 0) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART0);
-	} else if (line == 1) {
-		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_mapirq2imr(irq, MCFINTC_UART1);
-	}
-}
-
-static void __init m5407_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m5407_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m5407_uart_init_line(line, m5407_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void __init m5407_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
-void m5407_cpu_reset(void)
-{
-	local_irq_disable();
-	/* set watchdog to soft reset, and enabled */
-	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
-	for (;;)
-		/* wait for watchdog to timeout */;
-}
 
 /***************************************************************************/
 
 void __init config_BSP(char *commandp, int size)
 {
-	mach_reset = m5407_cpu_reset;
-	m5407_timers_init();
-	m5407_uarts_init();
+	mach_sched_init = hw_timer_init;
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);
@@ -110,13 +31,3 @@ void __init config_BSP(char *commandp, int size)
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-	platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/54xx/config.c b/arch/m68k/platform/54xx/config.c
index ee043540bfa2..2081c6cbb3de 100644
--- a/arch/m68k/platform/54xx/config.c
+++ b/arch/m68k/platform/54xx/config.c
@@ -27,64 +27,17 @@
 
 /***************************************************************************/
 
-static struct mcf_platform_uart m54xx_uart_platform[] = {
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 64 + 35,
-	},
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 64 + 34,
-	},
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE3,
-		.irq		= 64 + 33,
-	},
-	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE4,
-		.irq		= 64 + 32,
-	},
-};
-
-static struct platform_device m54xx_uart = {
-	.name			= "mcfuart",
-	.id			= 0,
-	.dev.platform_data	= m54xx_uart_platform,
-};
-
-static struct platform_device *m54xx_devices[] __initdata = {
-	&m54xx_uart,
-};
-
-
-/***************************************************************************/
-
-static void __init m54xx_uart_init_line(int line, int irq)
-{
-	int rts_cts;
-
-	/* enable io pins */
-	switch (line) {
-	case 0:
-		rts_cts = 0; break;
-	case 1:
-		rts_cts = MCF_PAR_PSC_RTS_RTS; break;
-	case 2:
-		rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break;
-	case 3:
-		rts_cts = 0; break;
-	}
-	__raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD,
-						MCF_MBAR + MCF_PAR_PSC(line));
-}
-
 static void __init m54xx_uarts_init(void)
 {
-	const int nrlines = ARRAY_SIZE(m54xx_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m54xx_uart_init_line(line, m54xx_uart_platform[line].irq);
+	/* enable io pins */
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
+		MCF_MBAR + MCF_PAR_PSC(0));
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
+		MCF_MBAR + MCF_PAR_PSC(1));
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
+		MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2));
+	__raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
+		MCF_MBAR + MCF_PAR_PSC(3));
 }
 
 /***************************************************************************/
@@ -145,18 +98,8 @@ void __init config_BSP(char *commandp, int size)
 	mmu_context_init();
 #endif
 	mach_reset = mcf54xx_reset;
+	mach_sched_init = hw_timer_init;
 	m54xx_uarts_init();
 }
 
 /***************************************************************************/
-
-static int __init init_BSP(void)
-{
-
-	platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
-	return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
diff --git a/arch/m68k/platform/68328/config.c b/arch/m68k/platform/68328/config.c
index d70bf2623db1..44b866544314 100644
--- a/arch/m68k/platform/68328/config.c
+++ b/arch/m68k/platform/68328/config.c
@@ -17,6 +17,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/rtc.h>
 #include <asm/system.h>
 #include <asm/machdep.h>
 #include <asm/MC68328.h>
@@ -26,7 +27,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 
@@ -48,7 +49,7 @@ void config_BSP(char *command, int len)
   printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
   printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
 
-  mach_gettod = m68328_timer_gettod;
+  mach_hwclk = m68328_hwclk;
   mach_reset = m68328_reset;
 }
 
diff --git a/arch/m68k/platform/68328/ints.c b/arch/m68k/platform/68328/ints.c
index 4bd456531f91..b3810febb3e3 100644
--- a/arch/m68k/platform/68328/ints.c
+++ b/arch/m68k/platform/68328/ints.c
@@ -68,8 +68,6 @@ asmlinkage irqreturn_t inthandler5(void);
 asmlinkage irqreturn_t inthandler6(void);
 asmlinkage irqreturn_t inthandler7(void);
 
-extern e_vector *_ramvec;
-
 /* The 68k family did not have a good way to determine the source
  * of interrupts until later in the family.  The EC000 core does
  * not provide the vector number on the stack, we vector everything
diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
index f2678866067b..b15ddef1ec76 100644
--- a/arch/m68k/platform/68328/timers.c
+++ b/arch/m68k/platform/68328/timers.c
@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clocksource.h>
+#include <linux/rtc.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -119,14 +120,17 @@ void hw_timer_init(void)
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec)
+int m68328_hwclk(int set, struct rtc_time *t)
 {
-	long now = RTCTIME;
-
-	*year = *mon = *day = 1;
-	*hour = (now >> 24) % 24;
-	*min = (now >> 16) % 60;
-	*sec = now % 60;
+	if (!set) {
+		long now = RTCTIME;
+		t->tm_year = t->tm_mon = t->tm_mday = 1;
+		t->tm_hour = (now >> 24) % 24;
+		t->tm_min = (now >> 16) % 60;
+		t->tm_sec = now % 60;
+	}
+
+	return 0;
 }
 
 /***************************************************************************/
diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c
index 9dd5bca38749..599a5949f320 100644
--- a/arch/m68k/platform/68360/config.c
+++ b/arch/m68k/platform/68360/config.c
@@ -103,11 +103,6 @@ void hw_timer_init(void)
   pquicc->timer_tgcr  = tgcr_save;
 }
 
-void BSP_gettod (int *yearp, int *monp, int *dayp,
-		   int *hourp, int *minp, int *secp)
-{
-}
-
 int BSP_set_clock_mmss(unsigned long nowtime)
 {
 #if 0
@@ -181,6 +176,5 @@ void config_BSP(char *command, int len)
   scc1_hwaddr = "\00\01\02\03\04\05";
 #endif
  
-  mach_gettod          = BSP_gettod;
-  mach_reset           = BSP_reset;
+  mach_reset = BSP_reset;
 }
diff --git a/arch/m68k/platform/68360/ints.c b/arch/m68k/platform/68360/ints.c
index 7b40202d9638..8cd42692331b 100644
--- a/arch/m68k/platform/68360/ints.c
+++ b/arch/m68k/platform/68360/ints.c
@@ -32,8 +32,6 @@ asmlinkage void trap(void);
 asmlinkage void bad_interrupt(void);
 asmlinkage void inthandler(void);
 
-extern void *_ramvec[];
-
 static void intc_irq_unmask(struct irq_data *d)
 {
 	pquicc->intr_cimr |= (1 << d->irq);
diff --git a/arch/m68k/platform/68EZ328/config.c b/arch/m68k/platform/68EZ328/config.c
index 1be1a16f6896..dd2c53554341 100644
--- a/arch/m68k/platform/68EZ328/config.c
+++ b/arch/m68k/platform/68EZ328/config.c
@@ -15,6 +15,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/rtc.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/machdep.h>
@@ -25,7 +26,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 
@@ -69,7 +70,7 @@ void config_BSP(char *command, int len)
   else command[0] = 0;
 #endif
  
-  mach_gettod = m68328_timer_gettod;
+  mach_hwclk = m68328_hwclk;
   mach_reset = m68ez328_reset;
 }
 
diff --git a/arch/m68k/platform/68VZ328/config.c b/arch/m68k/platform/68VZ328/config.c
index eabaabe8af36..25ec673edc25 100644
--- a/arch/m68k/platform/68VZ328/config.c
+++ b/arch/m68k/platform/68VZ328/config.c
@@ -20,6 +20,7 @@
 #include <linux/netdevice.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/rtc.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -33,7 +34,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
+int m68328_hwclk(int set, struct rtc_time *t);
 
 /***************************************************************************/
 /*                        Init Drangon Engine hardware                     */
@@ -181,7 +182,7 @@ void config_BSP(char *command, int size)
 
 	init_hardware(command, size);
 
-	mach_gettod = m68328_timer_gettod;
+	mach_hwclk = m68328_hwclk;
 	mach_reset = m68vz328_reset;
 }
 
diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index a8967baabd72..a0815c61dec1 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -14,18 +14,18 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206)	+= timers.o intc.o
-obj-$(CONFIG_M5206e)	+= timers.o intc.o
-obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
-obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
-obj-$(CONFIG_M5249)	+= timers.o intc.o
-obj-$(CONFIG_M527x)	+= pit.o intc-2.o
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
+obj-$(CONFIG_M5206)	+= timers.o intc.o reset.o
+obj-$(CONFIG_M5206e)	+= timers.o intc.o reset.o
+obj-$(CONFIG_M520x)	+= pit.o intc-simr.o reset.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249)	+= timers.o intc.o reset.o
+obj-$(CONFIG_M527x)	+= pit.o intc-2.o reset.o
 obj-$(CONFIG_M5272)	+= timers.o
-obj-$(CONFIG_M528x)	+= pit.o intc-2.o
-obj-$(CONFIG_M5307)	+= timers.o intc.o
-obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
-obj-$(CONFIG_M5407)	+= timers.o intc.o
+obj-$(CONFIG_M528x)	+= pit.o intc-2.o reset.o
+obj-$(CONFIG_M5307)	+= timers.o intc.o reset.o
+obj-$(CONFIG_M532x)	+= timers.o intc-simr.o reset.o
+obj-$(CONFIG_M5407)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M54xx)	+= sltimers.o intc-2.o
 
 obj-y			+= pinmux.o gpio.o
diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c
new file mode 100644
index 000000000000..fa50c48292ff
--- /dev/null
+++ b/arch/m68k/platform/coldfire/device.c
@@ -0,0 +1,318 @@
+/*
+ * device.c  -- common ColdFire SoC device support
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
+
+/*
+ *	All current ColdFire parts contain from 2, 3 or 4 UARTS.
+ */
+static struct mcf_platform_uart mcf_uart_platform_data[] = {
+	{
+		.mapbase	= MCFUART_BASE0,
+		.irq		= MCF_IRQ_UART0,
+	},
+	{
+		.mapbase	= MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
+	},
+#ifdef MCFUART_BASE2
+	{
+		.mapbase	= MCFUART_BASE2,
+		.irq		= MCF_IRQ_UART2,
+	},
+#endif
+#ifdef MCFUART_BASE3
+	{
+		.mapbase	= MCFUART_BASE3,
+		.irq		= MCF_IRQ_UART3,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device mcf_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= mcf_uart_platform_data,
+};
+
+#ifdef CONFIG_FEC
+/*
+ *	Some ColdFire cores contain the Fast Ethernet Controller (FEC)
+ *	block. It is Freescale's own hardware block. Some ColdFires
+ *	have 2 of these.
+ */
+static struct resource mcf_fec0_resources[] = {
+	{
+		.start		= MCFFEC_BASE0,
+		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_FECRX0,
+		.end		= MCF_IRQ_FECRX0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECTX0,
+		.end		= MCF_IRQ_FECTX0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECENTC0,
+		.end		= MCF_IRQ_FECENTC0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_fec0 = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
+	.resource		= mcf_fec0_resources,
+};
+
+#ifdef MCFFEC_BASE1
+static struct resource mcf_fec1_resources[] = {
+	{
+		.start		= MCFFEC_BASE1,
+		.end		= MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_FECRX1,
+		.end		= MCF_IRQ_FECRX1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECTX1,
+		.end		= MCF_IRQ_FECTX1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= MCF_IRQ_FECENTC1,
+		.end		= MCF_IRQ_FECENTC1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_fec1 = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
+	.resource		= mcf_fec1_resources,
+};
+#endif /* MCFFEC_BASE1 */
+#endif /* CONFIG_FEC */
+
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
+/*
+ *	The ColdFire QSPI module is an SPI protocol hardware block used
+ *	on a number of different ColdFire CPUs.
+ */
+static struct resource mcf_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_BASE,
+		.end		= MCFQSPI_BASE + MCFQSPI_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_QSPI,
+		.end		= MCF_IRQ_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static int mcf_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+#ifdef MCFQSPI_CS3
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		gpio_free(MCFQSPI_CS3);
+		goto fail3;
+	}
+#endif
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void mcf_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+#ifdef MCFQSPI_CS3
+	gpio_free(MCFQSPI_CS3);
+#endif
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void mcf_cs_select(struct mcfqspi_cs_control *cs_control,
+			  u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+#endif
+	}
+}
+
+static void mcf_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+#ifdef MCFQSPI_CS3
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+#endif
+	}
+}
+
+static struct mcfqspi_cs_control mcf_cs_control = {
+	.setup			= mcf_cs_setup,
+	.teardown		= mcf_cs_teardown,
+	.select			= mcf_cs_select,
+	.deselect		= mcf_cs_deselect,
+};
+
+static struct mcfqspi_platform_data mcf_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &mcf_cs_control,
+};
+
+static struct platform_device mcf_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_qspi_resources),
+	.resource		= mcf_qspi_resources,
+	.dev.platform_data	= &mcf_qspi_data,
+};
+#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+
+static struct platform_device *mcf_devices[] __initdata = {
+	&mcf_uart,
+#ifdef CONFIG_FEC
+	&mcf_fec0,
+#ifdef MCFFEC_BASE1
+	&mcf_fec1,
+#endif
+#endif
+#ifdef CONFIG_SPI_COLDFIRE_QSPI
+	&mcf_qspi,
+#endif
+};
+
+/*
+ *	Some ColdFire UARTs let you set the IRQ line to use.
+ */
+static void __init mcf_uart_set_irq(void)
+{
+#ifdef MCFUART_UIVR
+	/* UART0 interrupt setup */
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+	writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR);
+	mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0);
+
+	/* UART1 interrupt setup */
+	writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+	writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR);
+	mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1);
+#endif
+}
+
+static int __init mcf_init_devices(void)
+{
+	mcf_uart_set_irq();
+	platform_add_devices(mcf_devices, ARRAY_SIZE(mcf_devices));
+	return 0;
+}
+
+arch_initcall(mcf_init_devices);
+
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index 38f04a3f6207..c3db70ed33b3 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -158,6 +158,10 @@ _start:
 #if defined(CONFIG_UBOOT)
 	movel	%sp,_init_sp			/* save initial stack pointer */
 #endif
+#ifdef CONFIG_MBAR
+	movel	#CONFIG_MBAR+1,%d0		/* configured MBAR address */
+	movec	%d0,%MBAR			/* set it */
+#endif
 
 	/*
 	 *	Do any platform or board specific setup now. Most boards
diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
index 02663d25822d..e62dbbcb10f6 100644
--- a/arch/m68k/platform/coldfire/pit.c
+++ b/arch/m68k/platform/coldfire/pit.c
@@ -149,7 +149,7 @@ static struct clocksource pit_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
 	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
diff --git a/arch/m68k/platform/coldfire/reset.c b/arch/m68k/platform/coldfire/reset.c
new file mode 100644
index 000000000000..933e54eacc69
--- /dev/null
+++ b/arch/m68k/platform/coldfire/reset.c
@@ -0,0 +1,50 @@
+/*
+ * reset.c  -- common ColdFire SoC reset support
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ *	There are 2 common methods amongst the ColdFure parts for reseting
+ *	the CPU. But there are couple of exceptions, the 5272 and the 547x
+ *	have something completely special to them, and we let their specific
+ *	subarch code handle them.
+ */
+
+#ifdef MCFSIM_SYPCR
+static void mcf_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+#endif
+
+#ifdef MCF_RCR
+static void mcf_cpu_reset(void)
+{
+	local_irq_disable();
+	__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
+}
+#endif
+
+static int __init mcf_setup_reset(void)
+{
+	mach_reset = mcf_cpu_reset;
+	return 0;
+}
+
+arch_initcall(mcf_setup_reset);
diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
index 54e1452f853a..2027fc20b876 100644
--- a/arch/m68k/platform/coldfire/sltimers.c
+++ b/arch/m68k/platform/coldfire/sltimers.c
@@ -81,12 +81,14 @@ void mcfslt_profile_init(void)
 static u32 mcfslt_cycles_per_jiffy;
 static u32 mcfslt_cnt;
 
+static irq_handler_t timer_interrupt;
+
 static irqreturn_t mcfslt_tick(int irq, void *dummy)
 {
 	/* Reset Slice Timer 0 */
 	__raw_writel(MCFSLT_SSR_BE | MCFSLT_SSR_TE, TA(MCFSLT_SSR));
 	mcfslt_cnt += mcfslt_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction mcfslt_timer_irq = {
@@ -121,7 +123,7 @@ static struct clocksource mcfslt_clk = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	mcfslt_cycles_per_jiffy = MCF_BUSCLK / HZ;
 	/*
@@ -136,6 +138,7 @@ void hw_timer_init(void)
 	/* initialize mcfslt_cnt knowing that slice timers count down */
 	mcfslt_cnt = mcfslt_cycles_per_jiffy;
 
+	timer_interrupt = handler;
 	setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
 
 	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
index 0d90da32fcdb..ed96ce50d79f 100644
--- a/arch/m68k/platform/coldfire/timers.c
+++ b/arch/m68k/platform/coldfire/timers.c
@@ -47,6 +47,27 @@ void coldfire_profile_init(void);
 static u32 mcftmr_cycles_per_jiffy;
 static u32 mcftmr_cnt;
 
+static irq_handler_t timer_interrupt;
+
+/***************************************************************************/
+
+static void init_timer_irq(void)
+{
+#ifdef MCFSIM_ICR_AUTOVEC
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+#endif /* MCFSIM_ICR_AUTOVEC */
+}
+
 /***************************************************************************/
 
 static irqreturn_t mcftmr_tick(int irq, void *dummy)
@@ -55,7 +76,7 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
 	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
 
 	mcftmr_cnt += mcftmr_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -94,7 +115,7 @@ static struct clocksource mcftmr_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
@@ -110,6 +131,8 @@ void hw_timer_init(void)
 
 	clocksource_register_hz(&mcftmr_clk, FREQ);
 
+	timer_interrupt = handler;
+	init_timer_irq();
 	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 #ifdef CONFIG_HIGHPROFILE
diff --git a/arch/m68k/platform/coldfire/vectors.c b/arch/m68k/platform/coldfire/vectors.c
index 3a7cc524ecd3..a4dbdecbec7a 100644
--- a/arch/m68k/platform/coldfire/vectors.c
+++ b/arch/m68k/platform/coldfire/vectors.c
@@ -33,8 +33,6 @@ asmlinkage void dbginterrupt_c(struct frame *fp)
 
 /***************************************************************************/
 
-extern e_vector	*_ramvec;
-
 /* Assembler routines */
 asmlinkage void buserr(void);
 asmlinkage void trap(void);