diff options
author | Joe Perches <joe@perches.com> | 2008-03-21 11:06:25 -0700 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2008-03-26 00:17:42 -0400 |
commit | c3033b01d763aff572080db09ddcebed115b9cf5 (patch) | |
tree | b75bb33ba85185c9d6775ceafad09a103f643b35 | |
parent | f89e6e3834035c6e8203042f3527931aa7f52496 (diff) | |
download | linux-c3033b01d763aff572080db09ddcebed115b9cf5.tar.gz linux-c3033b01d763aff572080db09ddcebed115b9cf5.tar.bz2 linux-c3033b01d763aff572080db09ddcebed115b9cf5.zip |
e1000: Convert boolean_t to bool
On Thu, 2008-03-06 at 10:07 -0800, Kok, Auke wrote:
> send me a patch for e1000 and for ixgb and I'll happily apply those :)
boolean_t to bool
TRUE to true
FALSE to false
comment typo ahread to ahead
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r-- | drivers/net/e1000/e1000.h | 26 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 17 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 223 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.h | 62 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 90 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_osdep.h | 7 |
6 files changed, 209 insertions, 216 deletions
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 3b840283a9c3..d73a6c1fbcff 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -188,7 +188,7 @@ struct e1000_tx_ring { spinlock_t tx_lock; uint16_t tdh; uint16_t tdt; - boolean_t last_tx_tso; + bool last_tx_tso; }; struct e1000_rx_ring { @@ -283,17 +283,17 @@ struct e1000_adapter { uint32_t tx_fifo_size; uint8_t tx_timeout_factor; atomic_t tx_fifo_stall; - boolean_t pcix_82544; - boolean_t detect_tx_hung; + bool pcix_82544; + bool detect_tx_hung; /* RX */ #ifdef CONFIG_E1000_NAPI - boolean_t (*clean_rx) (struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring, - int *work_done, int work_to_do); + bool (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do); #else - boolean_t (*clean_rx) (struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); + bool (*clean_rx) (struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif void (*alloc_rx_buf) (struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, @@ -312,7 +312,7 @@ struct e1000_adapter { uint32_t alloc_rx_buff_failed; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; - boolean_t rx_csum; + bool rx_csum; unsigned int rx_ps_pages; uint32_t gorcl; uint64_t gorcl_old; @@ -335,12 +335,12 @@ struct e1000_adapter { struct e1000_rx_ring test_rx_ring; int msg_enable; - boolean_t have_msi; + bool have_msi; /* to not mess up cache alignment, always add to the bottom */ - boolean_t tso_force; - boolean_t smart_power_down; /* phy smart power down */ - boolean_t quad_port_a; + bool tso_force; + bool smart_power_down; /* phy smart power down */ + bool quad_port_a; unsigned long flags; uint32_t eeprom_wol; }; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 85e66f4c7886..05e1fb3cf49f 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -353,7 +353,7 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) netdev->features &= ~NETIF_F_TSO6; DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); - adapter->tso_force = TRUE; + adapter->tso_force = true; return 0; } @@ -922,7 +922,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) { struct net_device *netdev = adapter->netdev; - uint32_t mask, i=0, shared_int = TRUE; + uint32_t mask, i = 0; + bool shared_int = true; uint32_t irq = adapter->pdev->irq; *data = 0; @@ -931,7 +932,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Hook up test interrupt handler just for this test */ if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, netdev)) - shared_int = FALSE; + shared_int = false; else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, netdev->name, netdev)) { *data = 1; @@ -1295,7 +1296,7 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter) uint32_t ctrl_reg = 0; uint32_t stat_reg = 0; - adapter->hw.autoneg = FALSE; + adapter->hw.autoneg = false; if (adapter->hw.phy_type == e1000_phy_m88) { /* Auto-MDI/MDIX Off */ @@ -1473,7 +1474,7 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) case e1000_82545_rev_3: case e1000_82546_rev_3: default: - hw->autoneg = TRUE; + hw->autoneg = true; if (hw->phy_type == e1000_phy_gg82563) e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, @@ -1607,13 +1608,13 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) *data = 0; if (adapter->hw.media_type == e1000_media_type_internal_serdes) { int i = 0; - adapter->hw.serdes_link_down = TRUE; + adapter->hw.serdes_link_down = true; /* On some blade server designs, link establishment * could take as long as 2-3 minutes */ do { e1000_check_for_link(&adapter->hw); - if (adapter->hw.serdes_link_down == FALSE) + if (!adapter->hw.serdes_link_down) return *data; msleep(20); } while (i++ < 3750); @@ -1649,7 +1650,7 @@ e1000_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, uint64_t *data) { struct e1000_adapter *adapter = netdev_priv(netdev); - boolean_t if_running = netif_running(netdev); + bool if_running = netif_running(netdev); set_bit(__E1000_TESTING, &adapter->flags); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 7c6888c58c21..b64203458e9a 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -46,7 +46,8 @@ static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *pol static void e1000_clear_hw_cntrs(struct e1000_hw *hw); static void e1000_clear_vfta(struct e1000_hw *hw); static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); -static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, + bool link_up); static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank); @@ -62,7 +63,7 @@ static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32 static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); static void e1000_init_rx_addrs(struct e1000_hw *hw); static void e1000_initialize_hardware_bits(struct e1000_hw *hw); -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum); @@ -84,8 +85,8 @@ static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32 static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); static void e1000_release_software_flag(struct e1000_hw *hw); -static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); static int32_t e1000_wait_autoneg(struct e1000_hw *hw); @@ -425,22 +426,22 @@ e1000_set_mac_type(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_ich8lan: - hw->swfwhw_semaphore_present = TRUE; - hw->asf_firmware_present = TRUE; + hw->swfwhw_semaphore_present = true; + hw->asf_firmware_present = true; break; case e1000_80003es2lan: - hw->swfw_sync_present = TRUE; + hw->swfw_sync_present = true; /* fall through */ case e1000_82571: case e1000_82572: case e1000_82573: - hw->eeprom_semaphore_present = TRUE; + hw->eeprom_semaphore_present = true; /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: case e1000_82547_rev_2: - hw->asf_firmware_present = TRUE; + hw->asf_firmware_present = true; break; default: break; @@ -450,20 +451,20 @@ e1000_set_mac_type(struct e1000_hw *hw) * FD mode */ if (hw->mac_type == e1000_82543) - hw->bad_tx_carr_stats_fd = TRUE; + hw->bad_tx_carr_stats_fd = true; /* capable of receiving management packets to the host */ if (hw->mac_type >= e1000_82571) - hw->has_manc2h = TRUE; + hw->has_manc2h = true; /* In rare occasions, ESB2 systems would end up started without * the RX unit being turned on. */ if (hw->mac_type == e1000_80003es2lan) - hw->rx_needs_kicking = TRUE; + hw->rx_needs_kicking = true; if (hw->mac_type > e1000_82544) - hw->has_smbus = TRUE; + hw->has_smbus = true; return E1000_SUCCESS; } @@ -482,7 +483,7 @@ e1000_set_media_type(struct e1000_hw *hw) if (hw->mac_type != e1000_82543) { /* tbi_compatibility is only valid on 82543 */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } switch (hw->device_id) { @@ -513,7 +514,7 @@ e1000_set_media_type(struct e1000_hw *hw) if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ - hw->tbi_compatibility_en = FALSE; + hw->tbi_compatibility_en = false; } else { hw->media_type = e1000_media_type_copper; } @@ -569,7 +570,7 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; /* Delay to allow any outstanding PCI transactions to complete before * resetting the device @@ -682,7 +683,7 @@ e1000_reset_hw(struct e1000_hw *hw) msleep(20); break; case e1000_82573: - if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + if (!e1000_is_onboard_nvm_eeprom(hw)) { udelay(10); ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; @@ -1428,7 +1429,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) if (hw->mac_type <= e1000_82543 || hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 || hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) - hw->phy_reset_disable = FALSE; + hw->phy_reset_disable = false; return E1000_SUCCESS; } @@ -1470,7 +1471,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ if (hw->phy_type == e1000_phy_igp) { /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); + ret_val = e1000_set_d3_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D3\n"); return ret_val; @@ -1478,7 +1479,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) } /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, FALSE); + ret_val = e1000_set_d0_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D0\n"); return ret_val; @@ -1691,7 +1692,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * firmware will have already initialized them. We only initialize * them if the HW is not in IAMT mode. */ - if (e1000_check_mng_mode(hw) == FALSE) { + if (!e1000_check_mng_mode(hw)) { /* Enable Electrical Idle on the PHY */ phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE; ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, @@ -1892,7 +1893,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) } } - hw->get_link_status = TRUE; + hw->get_link_status = true; return E1000_SUCCESS; } @@ -1932,7 +1933,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) /* Config DSP to improve Giga link quality */ if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, TRUE); + ret_val = e1000_config_dsp_after_link_change(hw, true); if (ret_val) { DEBUGOUT("Error Configuring DSP after link up\n"); return ret_val; @@ -2923,7 +2924,7 @@ e1000_check_for_link(struct e1000_hw *hw) if (hw->media_type == e1000_media_type_fiber) { signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; if (status & E1000_STATUS_LU) - hw->get_link_status = FALSE; + hw->get_link_status = false; } } @@ -2947,7 +2948,7 @@ e1000_check_for_link(struct e1000_hw *hw) return ret_val; if (phy_data & MII_SR_LINK_STATUS) { - hw->get_link_status = FALSE; + hw->get_link_status = false; /* Check if there was DownShift, must be checked immediately after * link-up */ e1000_check_downshift(hw); @@ -2973,7 +2974,7 @@ e1000_check_for_link(struct e1000_hw *hw) } else { /* No link detected */ - e1000_config_dsp_after_link_change(hw, FALSE); + e1000_config_dsp_after_link_change(hw, false); return 0; } @@ -2983,7 +2984,7 @@ e1000_check_for_link(struct e1000_hw *hw) if (!hw->autoneg) return -E1000_ERR_CONFIG; /* optimize the dsp settings for the igp phy */ - e1000_config_dsp_after_link_change(hw, TRUE); + e1000_config_dsp_after_link_change(hw, true); /* We have a M88E1000 PHY and Auto-Neg is enabled. If we * have Si on board that is 82544 or newer, Auto @@ -3036,7 +3037,7 @@ e1000_check_for_link(struct e1000_hw *hw) rctl = E1000_READ_REG(hw, RCTL); rctl &= ~E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); - hw->tbi_compatibility_on = FALSE; + hw->tbi_compatibility_on = false; } } else { /* If TBI compatibility is was previously off, turn it on. For @@ -3045,7 +3046,7 @@ e1000_check_for_link(struct e1000_hw *hw) * will look like CRC errors to to the hardware. */ if (!hw->tbi_compatibility_on) { - hw->tbi_compatibility_on = TRUE; + hw->tbi_compatibility_on = true; rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_SBP; E1000_WRITE_REG(hw, RCTL, rctl); @@ -3098,7 +3099,7 @@ e1000_check_for_link(struct e1000_hw *hw) E1000_WRITE_REG(hw, TXCW, hw->txcw); E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); - hw->serdes_link_down = FALSE; + hw->serdes_link_down = false; } /* If we force link for non-auto-negotiation switch, check link status * based on MAC synchronization for internal serdes media type. @@ -3109,11 +3110,11 @@ e1000_check_for_link(struct e1000_hw *hw) udelay(10); if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { if (!(rxcw & E1000_RXCW_IV)) { - hw->serdes_link_down = FALSE; + hw->serdes_link_down = false; DEBUGOUT("SERDES: Link is up.\n"); } } else { - hw->serdes_link_down = TRUE; + hw->serdes_link_down = true; DEBUGOUT("SERDES: Link is down.\n"); } } @@ -4044,7 +4045,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; uint16_t phy_id_high, phy_id_low; - boolean_t match = FALSE; + bool match = false; DEBUGFUNC("e1000_detect_gig_phy"); @@ -4086,35 +4087,35 @@ e1000_detect_gig_phy(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82543: - if (hw->phy_id == M88E1000_E_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1000_E_PHY_ID) match = true; break; case e1000_82544: - if (hw->phy_id == M88E1000_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1000_I_PHY_ID) match = true; break; case e1000_82540: case e1000_82545: case e1000_82545_rev_3: case e1000_82546: case e1000_82546_rev_3: - if (hw->phy_id == M88E1011_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1011_I_PHY_ID) match = true; break; case e1000_82541: case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: - if (hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; + if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true; break; case e1000_82573: - if (hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; + if (hw->phy_id == M88E1111_I_PHY_ID) match = true; break; case e1000_80003es2lan: - if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE; + if (hw->phy_id == GG82563_E_PHY_ID) match = true; break; case e1000_ich8lan: - if (hw->phy_id == IGP03E1000_E_PHY_ID) match = TRUE; - if (hw->phy_id == IFE_E_PHY_ID) match = TRUE; - if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = TRUE; - if (hw->phy_id == IFE_C_E_PHY_ID) match = TRUE; + if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true; + if (hw->phy_id == IFE_E_PHY_ID) match = true; + if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true; + if (hw->phy_id == IFE_C_E_PHY_ID) match = true; break; default: DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); @@ -4455,8 +4456,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->opcode_bits = 3; eeprom->address_bits = 6; eeprom->delay_usec = 50; - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82540: case e1000_82545: @@ -4473,8 +4474,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->word_size = 64; eeprom->address_bits = 6; } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82541: case e1000_82541_rev_2: @@ -4503,8 +4504,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->address_bits = 6; } } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82571: case e1000_82572: @@ -4518,8 +4519,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; break; case e1000_82573: eeprom->type = e1000_eeprom_spi; @@ -4532,9 +4533,9 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = TRUE; - eeprom->use_eewr = TRUE; - if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + eeprom->use_eerd = true; + eeprom->use_eewr = true; + if (!e1000_is_onboard_nvm_eeprom(hw)) { eeprom->type = e1000_eeprom_flash; eeprom->word_size = 2048; @@ -4555,8 +4556,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->page_size = 8; eeprom->address_bits = 8; } - eeprom->use_eerd = TRUE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = true; + eeprom->use_eewr = false; break; case e1000_ich8lan: { @@ -4564,15 +4565,15 @@ e1000_init_eeprom_params(struct e1000_hw *hw) uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); eeprom->type = e1000_eeprom_ich8; - eeprom->use_eerd = FALSE; - eeprom->use_eewr = FALSE; + eeprom->use_eerd = false; + eeprom->use_eewr = false; eeprom->word_size = E1000_SHADOW_RAM_WORDS; /* Zero the shadow RAM structure. But don't load it from NVM * so as to save time for driver init */ if (hw->eeprom_shadow_ram != NULL) { for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].modified = false; hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } } @@ -4994,15 +4995,14 @@ e1000_read_eeprom(struct e1000_hw *hw, * directly. In this case, we need to acquire the EEPROM so that * FW or other port software does not interrupt. */ - if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && - hw->eeprom.use_eerd == FALSE) { + if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) { /* Prepare the EEPROM for bit-bang reading */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; } /* Eerd register EEPROM access requires no eeprom aquire/release */ - if (eeprom->use_eerd == TRUE) + if (eeprom->use_eerd) return e1000_read_eeprom_eerd(hw, offset, words, data); /* ICH EEPROM access is done via the ICH flash controller */ @@ -5171,7 +5171,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) * * hw - Struct containing variables accessed by shared code ****************************************************************************/ -static boolean_t +static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) { uint32_t eecd = 0; @@ -5179,7 +5179,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) DEBUGFUNC("e1000_is_onboard_nvm_eeprom"); if (hw->mac_type == e1000_ich8lan) - return FALSE; + return false; if (hw->mac_type == e1000_82573) { eecd = E1000_READ_REG(hw, EECD); @@ -5189,10 +5189,10 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) /* If both bits are set, device is Flash type */ if (eecd == 0x03) { - return FALSE; + return false; } } - return TRUE; + return true; } /****************************************************************************** @@ -5212,8 +5212,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) DEBUGFUNC("e1000_validate_eeprom_checksum"); - if ((hw->mac_type == e1000_82573) && - (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) { + if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) { /* Check bit 4 of word 10h. If it is 0, firmware is done updating * 10h-12h. Checksum may need to be fixed. */ e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); @@ -5339,7 +5338,7 @@ e1000_write_eeprom(struct e1000_hw *hw, } /* 82573 writes only through eewr */ - if (eeprom->use_eewr == TRUE) + if (eeprom->use_eewr) return e1000_write_eeprom_eewr(hw, offset, words, data); if (eeprom->type == e1000_eeprom_ich8) @@ -5536,7 +5535,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) uint32_t new_bank_offset = 0; uint8_t low_byte = 0; uint8_t high_byte = 0; - boolean_t sector_write_failed = FALSE; + bool sector_write_failed = false; if (hw->mac_type == e1000_82573) { /* The flop register will be used to determine if flash type is STM */ @@ -5588,21 +5587,21 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) e1000_erase_ich8_4k_segment(hw, 0); } - sector_write_failed = FALSE; + sector_write_failed = false; /* Loop for every byte in the shadow RAM, * which is in units of words. */ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { /* Determine whether to write the value stored * in the other NVM bank or a modified value stored * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified == TRUE) { + if (hw->eeprom_shadow_ram[i].modified) { low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; udelay(100); error = e1000_verify_write_ich8_byte(hw, (i << 1) + new_bank_offset, low_byte); if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = true; else { high_byte = (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); @@ -5616,7 +5615,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) (i << 1) + new_bank_offset, low_byte); if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = true; else { e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, &high_byte); @@ -5624,10 +5623,10 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) } } - /* If the write of the low byte was successful, go ahread and + /* If the write of the low byte was successful, go ahead and * write the high byte while checking to make sure that if it * is the signature byte, then it is handled properly */ - if (sector_write_failed == FALSE) { + if (!sector_write_failed) { /* If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the @@ -5640,7 +5639,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) error = e1000_verify_write_ich8_byte(hw, (i << 1) + new_bank_offset + 1, high_byte); if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = true; } else { /* If the write failed then break from the loop and @@ -5651,7 +5650,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* Don't bother writing the segment valid bits if sector * programming failed. */ - if (sector_write_failed == FALSE) { + if (!sector_write_failed) { /* Finally validate the new segment by setting bit 15:14 * to 10b in word 0x13 , this can be done without an * erase as well since these bits are 11 to start with @@ -5673,7 +5672,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* Clear the now not used entry in the cache */ for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].modified = false; hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } } @@ -5750,7 +5749,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) /* Reserve a spot for the Locally Administered Address to work around * an 82571 issue in which a reset on one port will reload the MAC on * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present)) rar_num -= 1; if (hw->mac_type == e1000_ich8lan) rar_num = E1000_RAR_ENTRIES_ICH8LAN; @@ -5922,7 +5921,7 @@ e1000_rar_set(struct e1000_hw *hw, case e1000_82571: case e1000_82572: case e1000_80003es2lan: - if (hw->leave_av_bit_off == TRUE) + if (hw->leave_av_bit_off) break; default: /* Indicate to hardware the Address is Valid. */ @@ -6425,7 +6424,7 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * * Call this after e1000_init_hw. You may override the IFS defaults by setting - * hw->ifs_params_forced to TRUE. However, you must initialize hw-> + * hw->ifs_params_forced to true. However, you must initialize hw-> * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio * before calling this function. *****************************************************************************/ @@ -6442,7 +6441,7 @@ e1000_reset_adaptive(struct e1000_hw *hw) hw->ifs_step_size = IFS_STEP; hw->ifs_ratio = IFS_RATIO; } - hw->in_ifs_mode = FALSE; + hw->in_ifs_mode = false; E1000_WRITE_REG(hw, AIT, 0); } else { DEBUGOUT("Not in Adaptive IFS mode!\n"); @@ -6465,7 +6464,7 @@ e1000_update_adaptive(struct e1000_hw *hw) if (hw->adaptive_ifs) { if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) { if (hw->tx_packet_delta > MIN_NUM_XMITS) { - hw->in_ifs_mode = TRUE; + hw->in_ifs_mode = true; if (hw->current_ifs_val < hw->ifs_max_val) { if (hw->current_ifs_val == 0) hw->current_ifs_val = hw->ifs_min_val; @@ -6477,7 +6476,7 @@ e1000_update_adaptive(struct e1000_hw *hw) } else { if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { hw->current_ifs_val = 0; - hw->in_ifs_mode = FALSE; + hw->in_ifs_mode = false; E1000_WRITE_REG(hw, AIT, 0); } } @@ -6968,7 +6967,7 @@ e1000_check_downshift(struct e1000_hw *hw) M88E1000_PSSR_DOWNSHIFT_SHIFT; } else if (hw->phy_type == e1000_phy_ife) { /* e1000_phy_ife supports 10/100 speed only */ - hw->speed_downgraded = FALSE; + hw->speed_downgraded = false; } return E1000_SUCCESS; @@ -6988,7 +6987,7 @@ e1000_check_downshift(struct e1000_hw *hw) static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, - boolean_t link_up) + bool link_up) { int32_t ret_val; uint16_t phy_data, phy_saved_data, speed, duplex, i; @@ -7198,7 +7197,7 @@ e1000_set_phy_mode(struct e1000_hw *hw) if (ret_val) return ret_val; - hw->phy_reset_disable = FALSE; + hw->phy_reset_disable = false; } } @@ -7221,7 +7220,7 @@ e1000_set_phy_mode(struct e1000_hw *hw) static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, - boolean_t active) + bool active) { uint32_t phy_ctrl = 0; int32_t ret_val; @@ -7351,7 +7350,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, - boolean_t active) + bool active) { uint32_t phy_ctrl = 0; int32_t ret_val; @@ -7689,9 +7688,9 @@ e1000_mng_write_commit(struct e1000_hw * hw) /***************************************************************************** * This function checks the mode of the firmware. * - * returns - TRUE when the mode is IAMT or FALSE. + * returns - true when the mode is IAMT or false. ****************************************************************************/ -boolean_t +bool e1000_check_mng_mode(struct e1000_hw *hw) { uint32_t fwsm; @@ -7701,12 +7700,12 @@ e1000_check_mng_mode(struct e1000_hw *hw) if (hw->mac_type == e1000_ich8lan) { if ((fwsm & E1000_FWSM_MODE_MASK) == (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return TRUE; + return true; } else if ((fwsm & E1000_FWSM_MODE_MASK) == (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) - return TRUE; + return true; - return FALSE; + return false; } @@ -7763,15 +7762,15 @@ e1000_calculate_mng_checksum(char *buffer, uint32_t length) /***************************************************************************** * This function checks whether tx pkt filtering needs to be enabled or not. * - * returns - TRUE for packet filtering or FALSE. + * returns - true for packet filtering or false. ****************************************************************************/ -boolean_t +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) { /* called in init as well as watchdog timer functions */ int32_t ret_val, checksum; - boolean_t tx_filter = FALSE; + bool tx_filter = false; struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); uint8_t *buffer = (uint8_t *) &(hw->mng_cookie); @@ -7787,11 +7786,11 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) E1000_MNG_DHCP_COOKIE_LENGTH)) { if (hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) - tx_filter = TRUE; + tx_filter = true; } else - tx_filter = TRUE; + tx_filter = true; } else - tx_filter = TRUE; + tx_filter = true; } } @@ -7804,7 +7803,7 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * - * returns: - TRUE/FALSE + * returns: - true/false * *****************************************************************************/ uint32_t @@ -7818,19 +7817,19 @@ e1000_enable_mng_pass_thru(struct e1000_hw *hw) if (!(manc & E1000_MANC_RCV_TCO_EN) || !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) - return FALSE; - if (e1000_arc_subsystem_valid(hw) == TRUE) { + return false; + if (e1000_arc_subsystem_valid(hw)) { fwsm = E1000_READ_REG(hw, FWSM); factps = E1000_READ_REG(hw, FACTPS); if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) == e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG)) - return TRUE; + return true; } else if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) - return TRUE; + return true; } - return FALSE; + return false; } static int32_t @@ -8264,14 +8263,14 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) case e1000_80003es2lan: fwsm = E1000_READ_REG(hw, FWSM); if ((fwsm & E1000_FWSM_MODE_MASK) != 0) - return TRUE; + return true; break; case e1000_ich8lan: - return TRUE; + return true; default: break; } - return FALSE; + return false; } @@ -8417,7 +8416,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, for (i = 0; i < words; i++) { if (hw->eeprom_shadow_ram != NULL && - hw->eeprom_shadow_ram[offset+i].modified == TRUE) { + hw->eeprom_shadow_ram[offset+i].modified) { data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word; } else { /* The NVM part needs a byte offset, hence * 2 */ @@ -8466,7 +8465,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, if (hw->eeprom_shadow_ram != NULL) { for (i = 0; i < words; i++) { if ((offset + i) < E1000_SHADOW_RAM_WORDS) { - hw->eeprom_shadow_ram[offset+i].modified = TRUE; + hw->eeprom_shadow_ram[offset+i].modified = true; hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i]; } else { error = -E1000_ERR_EEPROM; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a6c3c34feb98..572a7b6dc12e 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -100,8 +100,8 @@ typedef enum { } e1000_fc_type; struct e1000_shadow_ram { - uint16_t eeprom_word; - boolean_t modified; + uint16_t eeprom_word; + bool modified; }; /* PCI bus types */ @@ -274,8 +274,8 @@ struct e1000_eeprom_info { uint16_t address_bits; uint16_t delay_usec; uint16_t page_size; - boolean_t use_eerd; - boolean_t use_eewr; + bool use_eerd; + bool use_eewr; }; /* Flex ASF Information */ @@ -391,8 +391,8 @@ struct e1000_host_mng_dhcp_cookie{ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, uint16_t length); -boolean_t e1000_check_mng_mode(struct e1000_hw *hw); -boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +bool e1000_check_mng_mode(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); @@ -1420,7 +1420,7 @@ struct e1000_hw { uint32_t ledctl_default; uint32_t ledctl_mode1; uint32_t ledctl_mode2; - boolean_t tx_pkt_filtering; + bool tx_pkt_filtering; struct e1000_host_mng_dhcp_cookie mng_cookie; uint16_t phy_spd_default; uint16_t autoneg_advertised; @@ -1445,30 +1445,30 @@ struct e1000_hw { uint8_t dma_fairness; uint8_t mac_addr[NODE_ADDRESS_SIZE]; uint8_t perm_mac_addr[NODE_ADDRESS_SIZE]; - boolean_t disable_polarity_correction; - boolean_t speed_downgraded; + bool disable_polarity_correction; + bool speed_downgraded; e1000_smart_speed smart_speed; e1000_dsp_config dsp_config_state; - boolean_t get_link_status; - boolean_t serdes_link_down; - boolean_t tbi_compatibility_en; - boolean_t tbi_compatibility_on; - boolean_t laa_is_present; - boolean_t phy_reset_disable; - boolean_t initialize_hw_bits_disable; - boolean_t fc_send_xon; - boolean_t fc_strict_ieee; - boolean_t report_tx_early; - boolean_t adaptive_ifs; - boolean_t ifs_params_forced; - boolean_t in_ifs_mode; - boolean_t mng_reg_access_disabled; - boolean_t leave_av_bit_off; - boolean_t kmrn_lock_loss_workaround_disabled; - boolean_t bad_tx_carr_stats_fd; - boolean_t has_manc2h; - boolean_t rx_needs_kicking; - boolean_t has_smbus; + bool get_link_status; + bool serdes_link_down; + bool tbi_compatibility_en; + bool tbi_compatibility_on; + bool laa_is_present; + bool phy_reset_disable; + bool initialize_hw_bits_disable; + bool fc_send_xon; + bool fc_strict_ieee; + bool report_tx_early; + bool adaptive_ifs; + bool ifs_params_forced; + bool in_ifs_mode; + bool mng_reg_access_disabled; + bool leave_av_bit_off; + bool kmrn_lock_loss_workaround_disabled; + bool bad_tx_carr_stats_fd; + bool has_manc2h; + bool rx_needs_kicking; + bool has_smbus; }; @@ -2518,11 +2518,11 @@ struct e1000_host_command_info { * Typical use: * ... * if (TBI_ACCEPT) { - * accept_frame = TRUE; + * accept_frame = true; * e1000_tbi_adjust_stats(adapter, MacAddress); * frame_length--; * } else { - * accept_frame = FALSE; + * accept_frame = false; * } * ... */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 0991648c53dc..37c46558e1c7 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -169,21 +169,21 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); static irqreturn_t e1000_intr_msi(int irq, void *data); -static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring); +static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, + struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI static int e1000_clean(struct napi_struct *napi, int budget); -static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring, - int *work_done, int work_to_do); -static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring, - int *work_done, int work_to_do); +static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do); +static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring, + int *work_done, int work_to_do); #else -static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); -static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); +static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); +static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + struct e1000_rx_ring *rx_ring); #endif static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, @@ -584,7 +584,7 @@ void e1000_power_up_phy(struct e1000_adapter *adapter) static void e1000_power_down_phy(struct e1000_adapter *adapter) { /* Power down the PHY so no link is implied when interface is down * - * The PHY cannot be powered down if any of the following is TRUE * + * The PHY cannot be powered down if any of the following is true * * (a) WoL is enabled * (b) AMT is active * (c) SoL/IDER session is active */ @@ -673,7 +673,7 @@ e1000_reset(struct e1000_adapter *adapter) { uint32_t pba = 0, tx_space, min_tx_space, min_rx_space; uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; - boolean_t legacy_pba_adjust = FALSE; + bool legacy_pba_adjust = false; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. @@ -687,7 +687,7 @@ e1000_reset(struct e1000_adapter *adapter) case e1000_82540: case e1000_82541: case e1000_82541_rev_2: - legacy_pba_adjust = TRUE; + legacy_pba_adjust = true; pba = E1000_PBA_48K; break; case e1000_82545: @@ -698,7 +698,7 @@ e1000_reset(struct e1000_adapter *adapter) break; case e1000_82547: case e1000_82547_rev_2: - legacy_pba_adjust = TRUE; + legacy_pba_adjust = true; pba = E1000_PBA_30K; break; case e1000_82571: @@ -716,7 +716,7 @@ e1000_reset(struct e1000_adapter *adapter) break; } - if (legacy_pba_adjust == TRUE) { + if (legacy_pba_adjust) { if (adapter->netdev->mtu > E1000_RXBUFFER_8192) pba -= 8; /* allocate more FIFO for Tx */ @@ -1366,15 +1366,15 @@ e1000_sw_init(struct e1000_adapter *adapter) e1000_set_media_type(hw); - hw->wait_autoneg_complete = FALSE; - hw->tbi_compatibility_en = TRUE; - hw->adaptive_ifs = TRUE; + hw->wait_autoneg_complete = false; + hw->tbi_compatibility_en = true; + hw->adaptive_ifs = true; /* Copper options */ if (hw->media_type == e1000_media_type_copper) { hw->mdix = AUTO_ALL_MODES; - hw->disable_polarity_correction = FALSE; + hw->disable_polarity_correction = false; hw->master_slave = E1000_MASTER_SLAVE; } @@ -1576,7 +1576,7 @@ e1000_close(struct net_device *netdev) * @start: address of beginning of memory * @len: length of memory **/ -static boolean_t +static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start, unsigned long len) { @@ -1587,10 +1587,10 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, * write location to cross 64k boundary due to errata 23 */ if (adapter->hw.mac_type == e1000_82545 || adapter->hw.mac_type == e1000_82546) { - return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE; + return ((begin ^ (end - 1)) >> 16) != 0 ? false : true; } - return TRUE; + return true; } /** @@ -2133,7 +2133,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Enable 82543 Receive Checksum Offload for TCP and UDP */ if (hw->mac_type >= e1000_82543) { rxcsum = E1000_READ_REG(hw, RXCSUM); - if (adapter->rx_csum == TRUE) { + if (adapter->rx_csum) { rxcsum |= E1000_RXCSUM_TUOFL; /* Enable 82571 IPv4 payload checksum for UDP fragments @@ -2669,7 +2669,7 @@ e1000_watchdog(unsigned long data) if (link) { if (!netif_carrier_ok(netdev)) { uint32_t ctrl; - boolean_t txb2b = 1; + bool txb2b = true; e1000_get_speed_and_duplex(&adapter->hw, &adapter->link_speed, &adapter->link_duplex); @@ -2691,12 +2691,12 @@ e1000_watchdog(unsigned long data) adapter->tx_timeout_factor = 1; switch (adapter->link_speed) { case SPEED_10: - txb2b = 0; + txb2b = false; netdev->tx_queue_len = 10; adapter->tx_timeout_factor = 8; break; case SPEED_100: - txb2b = 0; + txb2b = false; netdev->tx_queue_len = 100; /* maybe add some timeout factor ? */ break; @@ -2704,7 +2704,7 @@ e1000_watchdog(unsigned long data) if ((adapter->hw.mac_type == e1000_82571 || adapter->hw.mac_type == e1000_82572) && - txb2b == 0) { + !txb2b) { uint32_t tarc0; tarc0 = E1000_READ_REG(&adapter->hw, TARC0); tarc0 &= ~(1 << 21); @@ -2802,7 +2802,7 @@ e1000_watchdog(unsigned long data) E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); /* Force detection of hung controller every watchdog period */ - adapter->detect_tx_hung = TRUE; + adapter->detect_tx_hung = true; /* With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] */ @@ -3025,12 +3025,12 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, if (++i == tx_ring->count) i = 0; tx_ring->next_to_use = i; - return TRUE; + return true; } - return FALSE; + return false; } -static boolean_t +static bool e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, struct sk_buff *skb) { @@ -3060,10 +3060,10 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, if (unlikely(++i == tx_ring->count)) i = 0; tx_ring->next_to_use = i; - return TRUE; + return true; } - return FALSE; + return false; } #define E1000_MAX_TXD_PWR 12 @@ -4038,7 +4038,7 @@ e1000_clean(struct napi_struct *napi, int budget) * @adapter: board private structure **/ -static boolean_t +static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring) { @@ -4049,7 +4049,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, #ifdef CONFIG_E1000_NAPI unsigned int count = 0; #endif - boolean_t cleaned = FALSE; + bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; @@ -4057,7 +4057,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, eop_desc = E1000_TX_DESC(*tx_ring, eop); while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - for (cleaned = FALSE; !cleaned; ) { + for (cleaned = false; !cleaned; ) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -4105,7 +4105,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, if (adapter->detect_tx_hung) { /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ - adapter->detect_tx_hung = FALSE; + adapter->detect_tx_hung = false; if (tx_ring->buffer_info[eop].dma && time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + (adapter->tx_timeout_factor * HZ)) @@ -4200,7 +4200,7 @@ e1000_rx_checksum(struct e1000_adapter *adapter, * @adapter: board private structure **/ -static boolean_t +static bool #ifdef CONFIG_E1000_NAPI e1000_clean_rx_irq(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, @@ -4219,7 +4219,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, uint8_t last_byte; unsigned int i; int cleaned_count = 0; - boolean_t cleaned = FALSE; + bool cleaned = false; unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; @@ -4247,7 +4247,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, next_buffer = &rx_ring->buffer_info[i]; - cleaned = TRUE; + cleaned = true; cleaned_count++; pci_unmap_single(pdev, buffer_info->dma, @@ -4373,7 +4373,7 @@ next_desc: * @adapter: board private structure **/ -static boolean_t +static bool #ifdef CONFIG_E1000_NAPI e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, struct e1000_rx_ring *rx_ring, @@ -4393,7 +4393,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, unsigned int i, j; uint32_t length, staterr; int cleaned_count = 0; - boolean_t cleaned = FALSE; + bool cleaned = false; unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; @@ -4420,7 +4420,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, next_buffer = &rx_ring->buffer_info[i]; - cleaned = TRUE; + cleaned = true; cleaned_count++; pci_unmap_single(pdev, buffer_info->dma, buffer_info->length, diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 10af742d8a20..365626d3177e 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -41,13 +41,6 @@ #include <linux/interrupt.h> #include <linux/sched.h> -typedef enum { -#undef FALSE - FALSE = 0, -#undef TRUE - TRUE = 1 -} boolean_t; - #ifdef DBG #define DEBUGOUT(S) printk(KERN_DEBUG S "\n") #define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A) |