diff options
author | Thomas Niederprüm <niederp@physik.uni-kl.de> | 2015-01-22 00:01:58 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2015-01-27 17:13:25 +0000 |
commit | f04b1e760a51120f358826d815d12c3f8ecdf1b4 (patch) | |
tree | 15ab3cf75b2dd1d2622c0874532890514e418d05 | |
parent | 1c34c876c4abb219381dcb7096206f1a609f119b (diff) | |
download | linux-f04b1e760a51120f358826d815d12c3f8ecdf1b4.tar.gz linux-f04b1e760a51120f358826d815d12c3f8ecdf1b4.tar.bz2 linux-f04b1e760a51120f358826d815d12c3f8ecdf1b4.zip |
ASoC: sta32x: add device tree binding.
make the sta32x driver usable with device tree configs. Code is heavily based
on the sta350 driver.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
-rw-r--r-- | Documentation/devicetree/bindings/sound/st,sta32x.txt | 92 | ||||
-rw-r--r-- | include/sound/sta32x.h | 18 | ||||
-rw-r--r-- | sound/soc/codecs/sta32x.c | 108 |
3 files changed, 211 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt new file mode 100644 index 000000000000..255de3ae5b2f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt @@ -0,0 +1,92 @@ +STA32X audio CODEC + +The driver for this device only supports I2C. + +Required properties: + + - compatible: "st,sta32x" + - reg: the I2C address of the device for I2C + - reset-gpios: a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + + - power-down-gpios: a GPIO spec for the power down pin. If specified, + it will be deasserted before communication to the codec + starts. + + - Vdda-supply: regulator spec, providing 3.3V + - Vdd3-supply: regulator spec, providing 3.3V + - Vcc-supply: regulator spec, providing 5V - 26V + +Optional properties: + + - st,output-conf: number, Selects the output configuration: + 0: 2-channel (full-bridge) power, 2-channel data-out + 1: 2 (half-bridge). 1 (full-bridge) on-board power + 2: 2 Channel (Full-Bridge) Power, 1 Channel FFX + 3: 1 Channel Mono-Parallel + If parameter is missing, mode 0 will be enabled. + This property has to be specified as '/bits/ 8' value. + + - st,ch1-output-mapping: Channel 1 output mapping + - st,ch2-output-mapping: Channel 2 output mapping + - st,ch3-output-mapping: Channel 3 output mapping + 0: Channel 1 + 1: Channel 2 + 2: Channel 3 + If parameter is missing, channel 1 is chosen. + This properties have to be specified as '/bits/ 8' values. + + - st,thermal-warning-recover: + If present, thermal warning recovery is enabled. + + - st,thermal-warning-adjustment: + If present, thermal warning adjustment is enabled. + + - st,fault-detect-recovery: + If present, then fault recovery will be enabled. + + - st,drop-compensation-ns: number + Only required for "st,ffx-power-output-mode" == + "variable-drop-compensation". + Specifies the drop compensation in nanoseconds. + The value must be in the range of 0..300, and only + multiples of 20 are allowed. Default is 140ns. + + - st,max-power-use-mpcc: + If present, then MPCC bits are used for MPC coefficients, + otherwise standard MPC coefficients are used. + + - st,max-power-corr: + If present, power bridge correction for THD reduction near maximum + power output is enabled. + + - st,am-reduction-mode: + If present, FFX mode runs in AM reduction mode, otherwise normal + FFX mode is used. + + - st,odd-pwm-speed-mode: + If present, PWM speed mode run on odd speed mode (341.3 kHz) on all + channels. If not present, normal PWM spped mode (384 kHz) will be used. + + - st,invalid-input-detect-mute: + If present, automatic invalid input detect mute is enabled. + +Example: + +codec: sta32x@38 { + compatible = "st,sta32x"; + reg = <0x1c>; + reset-gpios = <&gpio1 19 0>; + power-down-gpios = <&gpio1 16 0>; + st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel + // (full-bridge) power, + // 2-channel data-out + st,ch1-output-mapping = /bits/ 8 <0>; // set channel 1 output ch 1 + st,ch2-output-mapping = /bits/ 8 <0>; // set channel 2 output ch 1 + st,ch3-output-mapping = /bits/ 8 <0>; // set channel 3 output ch 1 + st,max-power-correction; // enables power bridge + // correction for THD reduction + // near maximum power output + st,invalid-input-detect-mute; // mute if no valid digital + // audio signal is provided. +}; diff --git a/include/sound/sta32x.h b/include/sound/sta32x.h index 8d93b0357a14..a894f7d17b1a 100644 --- a/include/sound/sta32x.h +++ b/include/sound/sta32x.h @@ -24,12 +24,20 @@ #define STA32X_THERMAL_RECOVERY_ENABLE 2 struct sta32x_platform_data { - int output_conf; - int ch1_output_mapping; - int ch2_output_mapping; - int ch3_output_mapping; - int thermal_conf; + u8 output_conf; + u8 ch1_output_mapping; + u8 ch2_output_mapping; + u8 ch3_output_mapping; int needs_esd_watchdog; + u8 drop_compensation_ns; + unsigned int thermal_warning_recovery:1; + unsigned int thermal_warning_adjustment:1; + unsigned int fault_detect_recovery:1; + unsigned int max_power_use_mpcc:1; + unsigned int max_power_correction:1; + unsigned int am_reduction_mode:1; + unsigned int odd_pwm_speed_mode:1; + unsigned int invalid_input_detect_mute:1; }; #endif /* __LINUX_SND__STA32X_H */ diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index ec2372498c92..669b67f8cee3 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -24,6 +24,8 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/gpio/consumer.h> @@ -893,15 +895,49 @@ static int sta32x_probe(struct snd_soc_codec *codec) dev_err(codec->dev, "Failed to startup device\n"); return ret; } - /* set thermal warning adjustment and recovery */ + + /* CONFA */ if (!pdata->thermal_warning_recovery) thermal |= STA32X_CONFA_TWAB; if (!pdata->thermal_warning_adjustment) thermal |= STA32X_CONFA_TWRB; + if (!pdata->fault_detect_recovery) + thermal |= STA32X_CONFA_FDRB; regmap_update_bits(sta32x->regmap, STA32X_CONFA, - STA32X_CONFA_TWAB | STA32X_CONFA_TWRB, + STA32X_CONFA_TWAB | STA32X_CONFA_TWRB | + STA32X_CONFA_FDRB, thermal); + /* CONFC */ + regmap_update_bits(sta32x->regmap, STA32X_CONFC, + STA32X_CONFC_CSZ_MASK, + pdata->drop_compensation_ns + << STA32X_CONFC_CSZ_SHIFT); + + /* CONFE */ + regmap_update_bits(sta32x->regmap, STA32X_CONFE, + STA32X_CONFE_MPCV, + pdata->max_power_use_mpcc ? + STA32X_CONFE_MPCV : 0); + regmap_update_bits(sta32x->regmap, STA32X_CONFE, + STA32X_CONFE_MPC, + pdata->max_power_correction ? + STA32X_CONFE_MPC : 0); + regmap_update_bits(sta32x->regmap, STA32X_CONFE, + STA32X_CONFE_AME, + pdata->am_reduction_mode ? + STA32X_CONFE_AME : 0); + regmap_update_bits(sta32x->regmap, STA32X_CONFE, + STA32X_CONFE_PWMS, + pdata->odd_pwm_speed_mode ? + STA32X_CONFE_PWMS : 0); + + /* CONFF */ + regmap_update_bits(sta32x->regmap, STA32X_CONFF, + STA32X_CONFF_IDE, + pdata->invalid_input_detect_mute ? + STA32X_CONFF_IDE : 0); + /* select output configuration */ regmap_update_bits(sta32x->regmap, STA32X_CONFF, STA32X_CONFF_OCFG_MASK, @@ -977,7 +1013,66 @@ static const struct regmap_config sta32x_regmap = { .rd_table = &sta32x_read_regs, .volatile_table = &sta32x_volatile_regs, }; + +#ifdef CONFIG_OF +static const struct of_device_id st32x_dt_ids[] = { + { .compatible = "st,sta32x", }, + { } }; +MODULE_DEVICE_TABLE(of, st32x_dt_ids); + +static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x) +{ + struct device_node *np = dev->of_node; + struct sta32x_platform_data *pdata; + u16 tmp; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + of_property_read_u8(np, "st,output-conf", + &pdata->output_conf); + of_property_read_u8(np, "st,ch1-output-mapping", + &pdata->ch1_output_mapping); + of_property_read_u8(np, "st,ch2-output-mapping", + &pdata->ch2_output_mapping); + of_property_read_u8(np, "st,ch3-output-mapping", + &pdata->ch3_output_mapping); + + if (of_get_property(np, "st,thermal-warning-recovery", NULL)) + pdata->thermal_warning_recovery = 1; + if (of_get_property(np, "st,thermal-warning-adjustment", NULL)) + pdata->thermal_warning_adjustment = 1; + if (of_get_property(np, "st,needs_esd_watchdog", NULL)) + pdata->needs_esd_watchdog = 1; + + tmp = 140; + of_property_read_u16(np, "st,drop-compensation-ns", &tmp); + pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20; + + /* CONFE */ + if (of_get_property(np, "st,max-power-use-mpcc", NULL)) + pdata->max_power_use_mpcc = 1; + + if (of_get_property(np, "st,max-power-correction", NULL)) + pdata->max_power_correction = 1; + + if (of_get_property(np, "st,am-reduction-mode", NULL)) + pdata->am_reduction_mode = 1; + + if (of_get_property(np, "st,odd-pwm-speed-mode", NULL)) + pdata->odd_pwm_speed_mode = 1; + + /* CONFF */ + if (of_get_property(np, "st,invalid-input-detect-mute", NULL)) + pdata->invalid_input_detect_mute = 1; + + sta32x->pdata = pdata; + + return 0; +} +#endif static int sta32x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) @@ -994,6 +1089,14 @@ static int sta32x_i2c_probe(struct i2c_client *i2c, mutex_init(&sta32x->coeff_lock); sta32x->pdata = dev_get_platdata(dev); +#ifdef CONFIG_OF + if (dev->of_node) { + ret = sta32x_probe_dt(dev, sta32x); + if (ret < 0) + return ret; + } +#endif + /* GPIOs */ sta32x->gpiod_nreset = devm_gpiod_get(dev, "reset"); if (IS_ERR(sta32x->gpiod_nreset)) { @@ -1051,6 +1154,7 @@ static struct i2c_driver sta32x_i2c_driver = { .driver = { .name = "sta32x", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(st32x_dt_ids), }, .probe = sta32x_i2c_probe, .remove = sta32x_i2c_remove, |