summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeter Hurley <peter@hurleysoftware.com>2015-10-10 16:00:52 -0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-10-17 21:11:29 -0700
commitfef062cbf2a90fd926a6fff9eb06dde1b699f1b3 (patch)
tree5f2cc71db26e745beb483d96b0005b6d9cdd2714
parent79c1faa4511e78380cd643dac88a775062a08bc0 (diff)
downloadlinux-fef062cbf2a90fd926a6fff9eb06dde1b699f1b3.tar.gz
linux-fef062cbf2a90fd926a6fff9eb06dde1b699f1b3.tar.bz2
linux-fef062cbf2a90fd926a6fff9eb06dde1b699f1b3.zip
tty: Remove ASYNC_CLOSING checks in open()/hangup() methods
Since at least before 2.6.30, tty drivers that do not drop the tty lock while closing cannot observe ASYNC_CLOSING set while holding the tty lock; this includes the tty driver's open() and hangup() methods, since the tty core calls these methods holding the tty lock. For these drivers, waiting for ASYNC_CLOSING to clear while opening is not required, since this condition cannot occur. Similarly, even when the open() method drops and reacquires the tty lock after blocking, ASYNC_CLOSING cannot be set (again, for drivers that do not drop the tty lock while closing). Now that tty port drivers no longer drop the tty lock while closing (since 'tty: Remove tty_wait_until_sent_from_close()'), the same conditions apply: waiting for ASYNC_CLOSING to clear while opening is not required, nor is re-checking ASYNC_CLOSING after dropping and reacquiring the tty lock while blocking (eg., in *_block_til_ready()). Note: The ASYNC_CLOSING flag state is still maintained since several bitrotting drivers use it for (dubious) other purposes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/char/pcmcia/synclink_cs.c9
-rw-r--r--drivers/tty/cyclades.c9
-rw-r--r--drivers/tty/rocket.c12
-rw-r--r--drivers/tty/serial/crisv10.c33
-rw-r--r--drivers/tty/synclink.c18
-rw-r--r--drivers/tty/synclink_gt.c14
-rw-r--r--drivers/tty/synclinkmp.c14
-rw-r--r--drivers/tty/tty_port.c13
-rw-r--r--net/irda/ircomm/ircomm_tty.c31
9 files changed, 11 insertions, 142 deletions
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 7680d5213ff8..45df4bf914f8 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2507,15 +2507,6 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
__FILE__, __LINE__, tty->driver->name, port->count);
- /* If port is closing, signal caller to try again */
- if (port->flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, port->close_wait,
- !(port->flags & ASYNC_CLOSING));
- retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 87f6578c6f4a..d4a1331675ed 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1577,15 +1577,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
#endif
/*
- * If the port is the middle of closing, bail out now
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
- }
-
- /*
* Start up serial port
*/
retval = cy_startup(info, tty);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index c8dd8dc31086..69c72d1aa627 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -895,14 +895,6 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
if (!page)
return -ENOMEM;
- if (port->flags & ASYNC_CLOSING) {
- retval = wait_for_completion_interruptible(&info->close_wait);
- free_page(page);
- if (retval)
- return retval;
- return ((port->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
- }
-
/*
* We must not sleep from here until the port is marked fully in use.
*/
@@ -1511,10 +1503,6 @@ static void rp_hangup(struct tty_struct *tty)
#endif
rp_flush_buffer(tty);
spin_lock_irqsave(&info->port.lock, flags);
- if (info->port.flags & ASYNC_CLOSING) {
- spin_unlock_irqrestore(&info->port.lock, flags);
- return;
- }
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 3e4470af5c50..06f4fe928dcd 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3759,23 +3759,6 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
int do_clocal = 0;
/*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- if (info->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
@@ -3825,7 +3808,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
#endif
break;
}
- if (!(info->port.flags & ASYNC_CLOSING) && do_clocal)
+ if (do_clocal)
/* && (do_clocal || DCD_IS_ASSERTED) */
break;
if (signal_pending(current)) {
@@ -3895,20 +3878,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY);
/*
- * If the port is in the middle of closing, bail out now
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- return ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If DMA is enabled try to allocate the irq's.
*/
if (info->port.count == 1) {
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 2fac7123b274..11d322b351dd 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3314,12 +3314,11 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
-EAGAIN : -ERESTARTSYS;
break;
}
-
+
dcd = tty_port_carrier_raised(&info->port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || dcd))
- break;
-
+ if (do_clocal || dcd)
+ break;
+
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
@@ -3398,15 +3397,6 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 0ea8eee00178..6fc39fbfc275 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -672,15 +672,6 @@ static int open(struct tty_struct *tty, struct file *filp)
DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
mutex_lock(&info->port.mutex);
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
@@ -3320,9 +3311,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
cd = tty_port_carrier_raised(port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
- break;
+ if (do_clocal || cd)
+ break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 08633a8139ff..fb00a06dfa4b 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -752,15 +752,6 @@ static int open(struct tty_struct *tty, struct file *filp)
printk("%s(%d):%s open(), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
- /* If port is closing, signal caller to try again */
- if (info->port.flags & ASYNC_CLOSING){
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
- retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
- goto cleanup;
- }
-
info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
@@ -3341,9 +3332,8 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
}
cd = tty_port_carrier_raised(port);
-
- if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
- break;
+ if (do_clocal || cd)
+ break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7d9f9cde964..0e1cf0495fb9 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -363,16 +363,6 @@ int tty_port_block_til_ready(struct tty_port *port,
unsigned long flags;
DEFINE_WAIT(wait);
- /* block if port is in the process of being closed */
- if (port->flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, port->close_wait,
- !(port->flags & ASYNC_CLOSING));
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
/* if non-blocking mode is set we can pass directly to open unless
the port has just hung up or is in another error state */
if (tty->flags & (1 << TTY_IO_ERROR)) {
@@ -423,8 +413,7 @@ int tty_port_block_til_ready(struct tty_port *port,
* Never ask drivers if CLOCAL is set, this causes troubles
* on some hardware.
*/
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || tty_port_carrier_raised(port)))
+ if (do_clocal || tty_port_carrier_raised(port))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 683346d2d633..a4237707f79d 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -335,8 +335,7 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
* specified, we cannot return before the IrCOMM link is
* ready
*/
- if (!test_bit(ASYNCB_CLOSING, &port->flags) &&
- (do_clocal || tty_port_carrier_raised(port)) &&
+ if ((do_clocal || tty_port_carrier_raised(port)) &&
self->state == IRCOMM_TTY_READY)
{
break;
@@ -443,34 +442,6 @@ static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
/* Not really used by us, but lets do it anyway */
self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
- /*
- * If the port is the middle of closing, bail out now
- */
- if (test_bit(ASYNCB_CLOSING, &self->port.flags)) {
-
- /* Hm, why are we blocking on ASYNC_CLOSING if we
- * do return -EAGAIN/-ERESTARTSYS below anyway?
- * IMHO it's either not needed in the first place
- * or for some reason we need to make sure the async
- * closing has been finished - if so, wouldn't we
- * probably better sleep uninterruptible?
- */
-
- if (wait_event_interruptible(self->port.close_wait,
- !test_bit(ASYNCB_CLOSING, &self->port.flags))) {
- net_warn_ratelimited("%s - got signal while blocking on ASYNC_CLOSING!\n",
- __func__);
- return -ERESTARTSYS;
- }
-
-#ifdef SERIAL_DO_RESTART
- return (self->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
/* Check if this is a "normal" ircomm device, or an irlpt device */
if (self->line < 0x10) {
self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;