Merge tag 'v4.13-rc1' into patchwork

Linux v4.13-rc1

* tag 'v4.13-rc1': (11136 commits)
  Linux v4.13-rc1
  random: reorder READ_ONCE() in get_random_uXX
  random: suppress spammy warnings about unseeded randomness
  replace incorrect strscpy use in FORTIFY_SOURCE
  kmod: throttle kmod thread limit
  kmod: add test driver to stress test the module loader
  MAINTAINERS: give kmod some maintainer love
  xtensa: use generic fb.h
  fault-inject: add /proc/<pid>/fail-nth
  fault-inject: simplify access check for fail-nth
  fault-inject: make fail-nth read/write interface symmetric
  fault-inject: parse as natural 1-based value for fail-nth write interface
  fault-inject: automatically detect the number base for fail-nth write interface
  kernel/watchdog.c: use better pr_fmt prefix
  MAINTAINERS: move the befs tree to kernel.org
  lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
  mm: fix overflow check in expand_upwards()
  ubifs: Set double hash cookie also for RENAME_EXCHANGE
  ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs
  ubifs: Don't leak kernel memory to the MTD
  ...

1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt
new file mode 100644
index 000000000000..a9bfb4d8b6ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mmio-mux.txt
@@ -0,0 +1,60 @@
+MMIO register bitfield-based multiplexer controller bindings
+
+Define register bitfields to be used to control multiplexers. The parent
+device tree node must be a syscon node to provide register access.
+
+Required properties:
+- compatible : "mmio-mux"
+- #mux-control-cells : <1>
+- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
+                  pairs, each describing a single mux control.
+* Standard mux-controller bindings as decribed in mux-controller.txt
+
+Optional properties:
+- idle-states : if present, the state the muxes will have when idle. The
+		special state MUX_IDLE_AS_IS is the default.
+
+The multiplexer state of each multiplexer is defined as the value of the
+bitfield described by the corresponding register offset and bitfield mask pair
+in the mux-reg-masks array, accessed through the parent syscon.
+
+Example:
+
+	syscon {
+		compatible = "syscon";
+
+		mux: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+
+			mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
+					<0x3 0x40>, /* 1: reg 0x3, bit 6 */
+			idle-states = <MUX_IDLE_AS_IS>, <0>;
+		};
+	};
+
+	video-mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+
+		ports {
+			/* inputs 0..3 */
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+			port@2 {
+				reg = <2>;
+			};
+			port@3 {
+				reg = <3>;
+			};
+
+			/* output */
+			port@4 {
+				reg = <4>;
+			};
+		};
+	};