docs: hwmon: Add an index file and rename docs to *.rst

Now that all files were converted to ReST format, rename them
and add an index.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 0 insertions, 148 deletions

diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
deleted file mode 100644
index 5c5860011d6e..000000000000
--- a/Documentation/hwmon/adm1275
+++ /dev/null
@@ -1,148 +0,0 @@
-Kernel driver adm1275
-=====================
-
-Supported chips:
-
-  * Analog Devices ADM1075
-
-    Prefix: 'adm1075'
-
-    Addresses scanned: -
-
-    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
-
-  * Analog Devices ADM1272
-
-    Prefix: 'adm1272'
-
-    Addresses scanned: -
-
-    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
-
-  * Analog Devices ADM1275
-
-    Prefix: 'adm1275'
-
-    Addresses scanned: -
-
-    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
-
-  * Analog Devices ADM1276
-
-    Prefix: 'adm1276'
-
-    Addresses scanned: -
-
-    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
-
-  * Analog Devices ADM1278
-
-    Prefix: 'adm1278'
-
-    Addresses scanned: -
-
-    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
-
-  * Analog Devices ADM1293/ADM1294
-
-    Prefix: 'adm1293', 'adm1294'
-
-    Addresses scanned: -
-
-    Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
-
-Author: Guenter Roeck <linux@roeck-us.net>
-
-
-Description
------------
-
-This driver supports hardware monitoring for Analog Devices ADM1075, ADM1272,
-ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 Hot-Swap Controller and
-Digital Power Monitors.
-
-ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293, and ADM1294 are hot-swap
-controllers that allow a circuit board to be removed from or inserted into
-a live backplane. They also feature current and voltage readback via an
-integrated 12 bit analog-to-digital converter (ADC), accessed using a
-PMBus interface.
-
-The driver is a client driver to the core PMBus driver. Please see
-Documentation/hwmon/pmbus for details on PMBus client drivers.
-
-
-Usage Notes
------------
-
-This driver does not auto-detect devices. You will have to instantiate the
-devices explicitly. Please see Documentation/i2c/instantiating-devices for
-details.
-
-The ADM1075, unlike many other PMBus devices, does not support internal voltage
-or current scaling. Reported voltages, currents, and power are raw measurements,
-and will typically have to be scaled.
-
-The shunt value in micro-ohms can be set via device tree at compile-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings
-if the device tree is used.
-
-Platform data support
----------------------
-
-The driver supports standard PMBus driver platform data. Please see
-Documentation/hwmon/pmbus for details.
-
-
-Sysfs entries
--------------
-
-The following attributes are supported. Limits are read-write, history reset
-attributes are write-only, all other attributes are read-only.
-
-======================= =======================================================
-inX_label		"vin1" or "vout1" depending on chip variant and
-			configuration. On ADM1075, ADM1293, and ADM1294,
-			vout1 reports the voltage on the VAUX pin.
-inX_input		Measured voltage.
-inX_min			Minimum Voltage.
-inX_max			Maximum voltage.
-inX_min_alarm		Voltage low alarm.
-inX_max_alarm		Voltage high alarm.
-inX_highest		Historical maximum voltage.
-inX_reset_history	Write any value to reset history.
-
-curr1_label		"iout1"
-curr1_input		Measured current.
-curr1_max		Maximum current.
-curr1_max_alarm		Current high alarm.
-curr1_lcrit		Critical minimum current. Depending on the chip
-			configuration, either curr1_lcrit or curr1_crit is
-			supported, but not both.
-curr1_lcrit_alarm	Critical current low alarm.
-curr1_crit		Critical maximum current. Depending on the chip
-			configuration, either curr1_lcrit or curr1_crit is
-			supported, but not both.
-curr1_crit_alarm	Critical current high alarm.
-curr1_highest		Historical maximum current.
-curr1_reset_history	Write any value to reset history.
-
-power1_label		"pin1"
-power1_input		Input power.
-power1_input_lowest	Lowest observed input power. ADM1293 and ADM1294 only.
-power1_input_highest	Highest observed input power.
-power1_reset_history	Write any value to reset history.
-
-			Power attributes are supported on ADM1075, ADM1272,
-			ADM1276, ADM1293, and ADM1294.
-
-temp1_input		Chip temperature.
-temp1_max		Maximum chip temperature.
-temp1_max_alarm		Temperature alarm.
-temp1_crit		Critical chip temperature.
-temp1_crit_alarm	Critical temperature high alarm.
-temp1_highest		Highest observed temperature.
-temp1_reset_history	Write any value to reset history.
-
-			Temperature attributes are supported on ADM1272 and
-			ADM1278.
-======================= =======================================================