docs: hwmon: convert three docs to ReST format

Those three new drivers were missed on the initial conversion
to ReST format. So:

- Rename them to .rst;
- Add them to the hwmon index.rst index;
- add some blank lines at the "Supported systems:" part, in
  order to allow Sphinx to properly identify new lines,
  suppressing warnings and avoid it to output some random
  lines in bold;
- When multiple authors are involved, change the authors
  part to a list, in order to avoid adding blank lines.
- adjust the table cells (one of the tables seemed to be
  assuming that tab is 4 positions instead of 8) and add
  the table markup.
- be sure that the section markups have the same number of
  characters as the section title.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 83 insertions, 0 deletions

diff --git a/Documentation/hwmon/lochnagar.rst b/Documentation/hwmon/lochnagar.rst
new file mode 100644
index 000000000000..1d609c4d18c3
--- /dev/null
+++ b/Documentation/hwmon/lochnagar.rst
@@ -0,0 +1,83 @@
+Kernel Driver Lochnagar
+=======================
+
+Supported systems:
+  * Cirrus Logic : Lochnagar 2
+
+Author: Lucas A. Tanure Alves
+
+Description
+-----------
+
+Lochnagar 2 features built-in Current Monitor circuitry that allows for the
+measurement of both voltage and current on up to eight of the supply voltage
+rails provided to the minicards. The Current Monitor does not require any
+hardware modifications or external circuitry to operate.
+
+The current and voltage measurements are obtained through the standard register
+map interface to the Lochnagar board controller, and can therefore be monitored
+by software.
+
+Sysfs attributes
+----------------
+
+======================= =======================================================
+temp1_input             The Lochnagar board temperature (milliCelsius)
+in0_input               Measured voltage for DBVDD1 (milliVolts)
+in0_label               "DBVDD1"
+curr1_input             Measured current for DBVDD1 (milliAmps)
+curr1_label             "DBVDD1"
+power1_average          Measured average power for DBVDD1 (microWatts)
+power1_average_interval Power averaging time input valid from 1 to 1708mS
+power1_label            "DBVDD1"
+in1_input               Measured voltage for 1V8 DSP (milliVolts)
+in1_label               "1V8 DSP"
+curr2_input             Measured current for 1V8 DSP (milliAmps)
+curr2_label             "1V8 DSP"
+power2_average          Measured average power for 1V8 DSP (microWatts)
+power2_average_interval Power averaging time input valid from 1 to 1708mS
+power2_label            "1V8 DSP"
+in2_input               Measured voltage for 1V8 CDC (milliVolts)
+in2_label               "1V8 CDC"
+curr3_input             Measured current for 1V8 CDC (milliAmps)
+curr3_label             "1V8 CDC"
+power3_average          Measured average power for 1V8 CDC (microWatts)
+power3_average_interval Power averaging time input valid from 1 to 1708mS
+power3_label            "1V8 CDC"
+in3_input               Measured voltage for VDDCORE DSP (milliVolts)
+in3_label               "VDDCORE DSP"
+curr4_input             Measured current for VDDCORE DSP (milliAmps)
+curr4_label             "VDDCORE DSP"
+power4_average          Measured average power for VDDCORE DSP (microWatts)
+power4_average_interval Power averaging time input valid from 1 to 1708mS
+power4_label            "VDDCORE DSP"
+in4_input               Measured voltage for AVDD 1V8 (milliVolts)
+in4_label               "AVDD 1V8"
+curr5_input             Measured current for AVDD 1V8 (milliAmps)
+curr5_label             "AVDD 1V8"
+power5_average          Measured average power for AVDD 1V8 (microWatts)
+power5_average_interval Power averaging time input valid from 1 to 1708mS
+power5_label            "AVDD 1V8"
+curr6_input             Measured current for SYSVDD (milliAmps)
+curr6_label             "SYSVDD"
+power6_average          Measured average power for SYSVDD (microWatts)
+power6_average_interval Power averaging time input valid from 1 to 1708mS
+power6_label            "SYSVDD"
+in6_input               Measured voltage for VDDCORE CDC (milliVolts)
+in6_label               "VDDCORE CDC"
+curr7_input             Measured current for VDDCORE CDC (milliAmps)
+curr7_label             "VDDCORE CDC"
+power7_average          Measured average power for VDDCORE CDC (microWatts)
+power7_average_interval Power averaging time input valid from 1 to 1708mS
+power7_label            "VDDCORE CDC"
+in7_input               Measured voltage for MICVDD (milliVolts)
+in7_label               "MICVDD"
+curr8_input             Measured current for MICVDD (milliAmps)
+curr8_label             "MICVDD"
+power8_average          Measured average power for MICVDD (microWatts)
+power8_average_interval Power averaging time input valid from 1 to 1708mS
+power8_label            "MICVDD"
+======================= =======================================================
+
+Note:
+    It is not possible to measure voltage on the SYSVDD rail.