summaryrefslogtreecommitdiffstats
path: root/Documentation/mmc
diff options
context:
space:
mode:
authorAdrian Hunter <adrian.hunter@nokia.com>2010-08-11 14:17:46 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-08-12 08:43:30 -0700
commitdfe86cba7676d58db8de7e623f5e72f1b0d3ca35 (patch)
treeed7e6a267c50e0ba2374dc6895515d7a100961a3 /Documentation/mmc
parent81d73a32d775ae9674ea6edf0b5b721fc3bc57d9 (diff)
downloadlinux-dfe86cba7676d58db8de7e623f5e72f1b0d3ca35.tar.gz
linux-dfe86cba7676d58db8de7e623f5e72f1b0d3ca35.tar.bz2
linux-dfe86cba7676d58db8de7e623f5e72f1b0d3ca35.zip
mmc: add erase, secure erase, trim and secure trim operations
SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'Documentation/mmc')
-rw-r--r--Documentation/mmc/00-INDEX4
-rw-r--r--Documentation/mmc/mmc-dev-attrs.txt56
2 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX
new file mode 100644
index 000000000000..fca586f5b853
--- /dev/null
+++ b/Documentation/mmc/00-INDEX
@@ -0,0 +1,4 @@
+00-INDEX
+ - this file
+mmc-dev-attrs.txt
+ - info on SD and MMC device attributes
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
new file mode 100644
index 000000000000..ff2bd685bced
--- /dev/null
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -0,0 +1,56 @@
+SD and MMC Device Attributes
+============================
+
+All attributes are read-only.
+
+ cid Card Identifaction Register
+ csd Card Specific Data Register
+ scr SD Card Configuration Register (SD only)
+ date Manufacturing Date (from CID Register)
+ fwrev Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
+ hwrev Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+ manfid Manufacturer ID (from CID Register)
+ name Product Name (from CID Register)
+ oemid OEM/Application ID (from CID Register)
+ serial Product Serial Number (from CID Register)
+ erase_size Erase group size
+ preferred_erase_size Preferred erase size
+
+Note on Erase Size and Preferred Erase Size:
+
+ "erase_size" is the minimum size, in bytes, of an erase
+ operation. For MMC, "erase_size" is the erase group size
+ reported by the card. Note that "erase_size" does not apply
+ to trim or secure trim operations where the minimum size is
+ always one 512 byte sector. For SD, "erase_size" is 512
+ if the card is block-addressed, 0 otherwise.
+
+ SD/MMC cards can erase an arbitrarily large area up to and
+ including the whole card. When erasing a large area it may
+ be desirable to do it in smaller chunks for three reasons:
+ 1. A single erase command will make all other I/O on
+ the card wait. This is not a problem if the whole card
+ is being erased, but erasing one partition will make
+ I/O for another partition on the same card wait for the
+ duration of the erase - which could be a several
+ minutes.
+ 2. To be able to inform the user of erase progress.
+ 3. The erase timeout becomes too large to be very
+ useful. Because the erase timeout contains a margin
+ which is multiplied by the size of the erase area,
+ the value can end up being several minutes for large
+ areas.
+
+ "erase_size" is not the most efficient unit to erase
+ (especially for SD where it is just one sector),
+ hence "preferred_erase_size" provides a good chunk
+ size for erasing large areas.
+
+ For MMC, "preferred_erase_size" is the high-capacity
+ erase size if a card specifies one, otherwise it is
+ based on the capacity of the card.
+
+ For SD, "preferred_erase_size" is the allocation unit
+ size specified by the card.
+
+ "preferred_erase_size" is in bytes.