summaryrefslogtreecommitdiffstats
path: root/Documentation/power/basic-pm-debugging.txt
diff options
context:
space:
mode:
authorShuoX Liu <shuox.liu@intel.com>2011-08-10 23:01:26 +0200
committerRafael J. Wysocki <rjw@sisk.pl>2011-10-16 23:27:45 +0200
commit2a77c46de1e3dace73745015635ebbc648eca69c (patch)
treea801ed6ba5623c7d963377906776ade6f02eea0a /Documentation/power/basic-pm-debugging.txt
parent9bd717c0dc8224cadfd66df7eeff98c987711d98 (diff)
downloadlinux-2a77c46de1e3dace73745015635ebbc648eca69c.tar.gz
linux-2a77c46de1e3dace73745015635ebbc648eca69c.tar.bz2
linux-2a77c46de1e3dace73745015635ebbc648eca69c.zip
PM / Suspend: Add statistics debugfs file for suspend to RAM
Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Diffstat (limited to 'Documentation/power/basic-pm-debugging.txt')
-rw-r--r--Documentation/power/basic-pm-debugging.txt24
1 files changed, 24 insertions, 0 deletions
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index ddd78172ef73..62eca080a71b 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -201,3 +201,27 @@ case, you may be able to search for failing drivers by following the procedure
analogous to the one described in section 1. If you find some failing drivers,
you will have to unload them every time before an STR transition (ie. before
you run s2ram), and please report the problems with them.
+
+There is a debugfs entry which shows the suspend to RAM statistics. Here is an
+example of its output.
+ # mount -t debugfs none /sys/kernel/debug
+ # cat /sys/kernel/debug/suspend_stats
+ success: 20
+ fail: 5
+ failed_freeze: 0
+ failed_prepare: 0
+ failed_suspend: 5
+ failed_suspend_noirq: 0
+ failed_resume: 0
+ failed_resume_noirq: 0
+ failures:
+ last_failed_dev: alarm
+ adc
+ last_failed_errno: -16
+ -16
+ last_failed_step: suspend
+ suspend
+Field success means the success number of suspend to RAM, and field fail means
+the failure number. Others are the failure number of different steps of suspend
+to RAM. suspend_stats just lists the last 2 failed devices, error number and
+failed step of suspend.