scsi: docs: convert g_NCR5380.txt to ReST

Link: https://lore.kernel.org/r/a66e9ea704be6a7aa81b9864ad66a32b75ab808d.1583136624.git.mchehab+huawei@kernel.org
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

4 files changed, 97 insertions, 71 deletions

diff --git a/Documentation/scsi/g_NCR5380.rst b/Documentation/scsi/g_NCR5380.rst
new file mode 100644
index 000000000000..a282059fec43
--- /dev/null
+++ b/Documentation/scsi/g_NCR5380.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==========================================
+README file for the Linux g_NCR5380 driver
+==========================================
+
+Copyright |copy| 1993 Drew Eckhard
+
+NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin
+
+This file documents the NCR53c400 extensions by Kevin Lentin and some
+enhancements to the NCR5380 core.
+
+This driver supports NCR5380 and NCR53c400 and compatible cards in port or
+memory mapped modes.
+
+Use of an interrupt is recommended, if supported by the board, as this will
+allow targets to disconnect and thereby improve SCSI bus utilization.
+
+If the irq parameter is 254 or is omitted entirely, the driver will probe
+for the correct IRQ line automatically. If the irq parameter is 0 or 255
+then no IRQ will be used.
+
+The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
+supported by the driver.
+
+This driver provides some information on what it has detected in
+/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
+time. More info to come in the future.
+
+This driver works as a module.
+When included as a module, parameters can be passed on the insmod/modprobe
+command line:
+
+  ============= ===============================================================
+  irq=xx[,...]	the interrupt(s)
+  base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
+  card=xx[,...]	card type(s):
+
+		==  ======================================
+		0   NCR5380,
+		1   NCR53C400,
+		2   NCR53C400A,
+		3   Domex Technology Corp 3181E (DTC3181E)
+		4   Hewlett Packard C2502
+		==  ======================================
+  ============= ===============================================================
+
+These old-style parameters can support only one card:
+
+  ============= =================================================
+  ncr_irq=xx    the interrupt
+  ncr_addr=xx   the port or base address (for port or memory
+                mapped, resp.)
+  ncr_5380=1    to set up for a NCR5380 board
+  ncr_53c400=1  to set up for a NCR53C400 board
+  ncr_53c400a=1 to set up for a NCR53C400A board
+  dtc_3181e=1   to set up for a Domex Technology Corp 3181E board
+  hp_c2502=1    to set up for a Hewlett Packard C2502 board
+  ============= =================================================
+
+E.g. Trantor T130B in its default configuration::
+
+	modprobe g_NCR5380 irq=5 base=0x350 card=1
+
+or alternatively, using the old syntax::
+
+	modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
+
+E.g. a port mapped NCR5380 board, driver to probe for IRQ::
+
+	modprobe g_NCR5380 base=0x350 card=0
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+
+E.g. a memory mapped NCR53C400 board with no IRQ::
+
+	modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+
+E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+and HP C2502 at 0x300 with IRQ 7::
+
+	modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+
+Kevin Lentin
+K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
deleted file mode 100644
index 37b1967a00a9..000000000000
--- a/Documentation/scsi/g_NCR5380.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-README file for the Linux g_NCR5380 driver.
-
-(c) 1993 Drew Eckhard
-NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
-
-This file documents the NCR53c400 extensions by Kevin Lentin and some
-enhancements to the NCR5380 core.
-
-This driver supports NCR5380 and NCR53c400 and compatible cards in port or
-memory mapped modes.
-
-Use of an interrupt is recommended, if supported by the board, as this will
-allow targets to disconnect and thereby improve SCSI bus utilization.
-
-If the irq parameter is 254 or is omitted entirely, the driver will probe
-for the correct IRQ line automatically. If the irq parameter is 0 or 255
-then no IRQ will be used.
-
-The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
-supported by the driver.
-
-This driver provides some information on what it has detected in
-/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
-time. More info to come in the future.
-
-This driver works as a module.
-When included as a module, parameters can be passed on the insmod/modprobe
-command line:
-  irq=xx[,...]	the interrupt(s)
-  base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
-  card=xx[,...]	card type(s):
-		0 = NCR5380,
-		1 = NCR53C400,
-		2 = NCR53C400A,
-		3 = Domex Technology Corp 3181E (DTC3181E)
-		4 = Hewlett Packard C2502
-
-These old-style parameters can support only one card:
-  ncr_irq=xx   the interrupt
-  ncr_addr=xx  the port or base address (for port or memory
-               mapped, resp.)
-  ncr_5380=1   to set up for a NCR5380 board
-  ncr_53c400=1 to set up for a NCR53C400 board
-  ncr_53c400a=1 to set up for a NCR53C400A board
-  dtc_3181e=1  to set up for a Domex Technology Corp 3181E board
-  hp_c2502=1   to set up for a Hewlett Packard C2502 board
-
-E.g. Trantor T130B in its default configuration:
-modprobe g_NCR5380 irq=5 base=0x350 card=1
-or alternatively, using the old syntax,
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
-
-E.g. a port mapped NCR5380 board, driver to probe for IRQ:
-modprobe g_NCR5380 base=0x350 card=0
-or alternatively,
-modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
-
-E.g. a memory mapped NCR53C400 board with no IRQ:
-modprobe g_NCR5380 irq=255 base=0xc8000 card=1
-or alternatively,
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
-
-E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
-and HP C2502 at 0x300 with IRQ 7:
-modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
-
-Kevin Lentin
-K.Lentin@cs.monash.edu.au
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index aad8359357e6..4b577c9e804e 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -20,5 +20,6 @@ Linux SCSI Subsystem
    dc395x
    dpti
    FlashPoint
+   g_NCR5380
 
    scsi_transport_srp/figures
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 266fd3b2398a..864bbf7f737b 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -57,13 +57,13 @@ parameters may be changed at runtime by the command
 			See header of drivers/scsi/NCR_D700.c.
 
 	ncr5380=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c400=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c400a=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c8xx=	[HW,SCSI]