Merge drm/drm-next into drm-misc-next

Backmerging 5.2-rc1 to -misc-next for robher

Signed-off-by: Sean Paul <seanpaul@chromium.org>

1 files changed, 47 insertions, 36 deletions

diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.txt
index aee715af7db7..ca9adcf56355 100644
--- a/Documentation/usb/rio.txt
+++ b/Documentation/usb/rio.txt
@@ -1,72 +1,80 @@
+============
+Diamonds Rio
+============
+
 Copyright (C) 1999, 2000 Bruce Tenison
+
 Portions Copyright (C) 1999, 2000 David Nelson
+
 Thanks to David Nelson for guidance and the usage of the scanner.txt
 and scanner.c files to model our driver and this informative file.
 
 Mar. 2, 2000
 
-CHANGES
+Changes
+=======
 
 - Initial Revision
 
 
-OVERVIEW
+Overview
+========
 
 This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.  
+to access a RIO 500 mp3 player.
 Before I explain how to use this to access the Rio500 please be warned:
 
-W A R N I N G:
---------------
+.. warning::
 
-Please note that this software is still under development.  The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
+   Please note that this software is still under development.  The authors
+   are in no way responsible for any damage that may occur, no matter how
+   inconsequential.
 
 It seems that the Rio has a problem when sending .mp3 with low batteries.
 I suggest when the batteries are low and you want to transfer stuff that you
 replace it with a fresh one. In my case, what happened is I lost two 16kb
 blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash 
+know if that's normal or not; it could simply be a problem with the flash
 memory.
 
-In an extreme case, I left my Rio playing overnight and the batteries wore 
-down to nothing and appear to have corrupted the flash memory. My RIO 
-needed to be replaced as a result.  Diamond tech support is aware of the 
-problem.  Do NOT allow your batteries to wear down to nothing before 
-changing them.  It appears RIO 500 firmware does not handle low battery 
-power well at all. 
+In an extreme case, I left my Rio playing overnight and the batteries wore
+down to nothing and appear to have corrupted the flash memory. My RIO
+needed to be replaced as a result.  Diamond tech support is aware of the
+problem.  Do NOT allow your batteries to wear down to nothing before
+changing them.  It appears RIO 500 firmware does not handle low battery
+power well at all.
 
-On systems with OHCI controllers, the kernel OHCI code appears to have 
-power on problems with some chipsets.  If you are having problems 
-connecting to your RIO 500, try turning it on first and then plugging it 
-into the USB cable.  
+On systems with OHCI controllers, the kernel OHCI code appears to have
+power on problems with some chipsets.  If you are having problems
+connecting to your RIO 500, try turning it on first and then plugging it
+into the USB cable.
 
-Contact information:
---------------------
+Contact Information
+-------------------
 
    The main page for the project is hosted at sourceforge.net in the following
    URL: <http://rio500.sourceforge.net>. You can also go to the project's
    sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
    There is also a mailing list: rio500-users@lists.sourceforge.net
 
-Authors:
+Authors
 -------
 
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith 
+Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
 Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
 things work there. Bruce Tenison <btenison@dibbs.net> is adding support
 for .fon files and also does testing. The program will mostly sure be
 re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use 
+also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
 with some important information regarding the communication with the Rio.
 
-ADDITIONAL INFORMATION and Userspace tools
+Additional Information and userspace tools
 
-http://rio500.sourceforge.net/
+	http://rio500.sourceforge.net/
 
 
-REQUIREMENTS
+Requirements
+============
 
 A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
 (Compaq and others) hardware port should work.
@@ -80,11 +88,11 @@ A Linux kernel with RIO 500 support enabled.
 'lspci' which is only needed to determine the type of USB hardware
 available in your machine.
 
-CONFIGURATION
+Configuration
 
 Using `lspci -v`, determine the type of USB hardware available.
 
-  If you see something like:
+  If you see something like::
 
     USB Controller: ......
     Flags: .....
@@ -92,7 +100,7 @@ Using `lspci -v`, determine the type of USB hardware available.
 
   Then you have a UHCI based controller.
 
-  If you see something like:
+  If you see something like::
 
      USB Controller: .....
      Flags: ....
@@ -107,8 +115,9 @@ hardware (determined from the steps above), 'USB Diamond Rio500 support', and
 (you may need to execute `depmod -a` to update the module
 dependencies).
 
-Add a device for the USB rio500:
-  `mknod /dev/usb/rio500 c 180 64`
+Add a device for the USB rio500::
+
+  mknod /dev/usb/rio500 c 180 64
 
 Set appropriate permissions for /dev/usb/rio500 (don't forget about
 group and world permissions).  Both read and write permissions are
@@ -116,12 +125,14 @@ required for proper operation.
 
 Load the appropriate modules (if compiled as modules):
 
-  OHCI:
+  OHCI::
+
     modprobe usbcore
     modprobe usb-ohci
     modprobe rio500
 
-  UHCI:
+  UHCI::
+
     modprobe usbcore
     modprobe usb-uhci  (or uhci)
     modprobe rio500
@@ -129,10 +140,10 @@ Load the appropriate modules (if compiled as modules):
 That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
 be able to access the rio500.
 
-BUGS
+Bugs
+====
 
 If you encounter any problems feel free to drop me an email.
 
 Bruce Tenison
 btenison@dibbs.net
-