summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorJaroslav Kysela <perex@suse.cz>2006-03-22 11:02:08 +0100
committerJaroslav Kysela <perex@suse.cz>2006-03-22 11:02:08 +0100
commit5501972e0b5857bc8354770d900ceb9b40c7f6b7 (patch)
treeff239422827c4cd54d2998f8851304255de31b38 /Documentation
parent9d2f928ddf64ca0361562e30faf584cd33055c60 (diff)
parente952f31bce6e9f64db01f607abc46529ba57ac9e (diff)
downloadlinux-5501972e0b5857bc8354770d900ceb9b40c7f6b7.tar.gz
linux-5501972e0b5857bc8354770d900ceb9b40c7f6b7.tar.bz2
linux-5501972e0b5857bc8354770d900ceb9b40c7f6b7.zip
Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/Changes18
-rw-r--r--Documentation/connector/connector.txt5
-rw-r--r--Documentation/dvb/avermedia.txt10
-rw-r--r--Documentation/dvb/bt8xx.txt140
-rw-r--r--Documentation/dvb/get_dvb_firmware23
-rw-r--r--Documentation/dvb/readme.txt32
-rw-r--r--Documentation/feature-removal-schedule.txt18
-rw-r--r--Documentation/networking/e100.txt158
-rw-r--r--Documentation/networking/e1000.txt620
-rw-r--r--Documentation/networking/ip-sysctl.txt49
-rw-r--r--Documentation/usb/et61x251.txt10
-rw-r--r--Documentation/usb/sn9c102.txt11
-rw-r--r--Documentation/usb/zc0301.txt254
-rw-r--r--Documentation/video4linux/CARDLIST.cx882
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx1
-rw-r--r--Documentation/video4linux/CARDLIST.saa71349
-rw-r--r--Documentation/video4linux/CARDLIST.tuner6
-rw-r--r--Documentation/video4linux/README.cpia2130
-rw-r--r--Documentation/video4linux/cpia2_overview.txt38
19 files changed, 1113 insertions, 421 deletions
diff --git a/Documentation/Changes b/Documentation/Changes
index fe5ae0f55020..b02f476c2973 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -15,24 +15,6 @@ and therefore owes credit to the same people as that file (Jared Mauch,
Axel Boldt, Alessandro Sigala, and countless other users all over the
'net).
-The latest revision of this document, in various formats, can always
-be found at <http://cyberbuzz.gatech.edu/kaboom/linux/Changes-2.4/>.
-
-Feel free to translate this document. If you do so, please send me a
-URL to your translation for inclusion in future revisions of this
-document.
-
-Smotrite file <http://oblom.rnc.ru/linux/kernel/Changes.ru>, yavlyaushisya
-russkim perevodom dannogo documenta.
-
-Visite <http://www2.adi.uam.es/~ender/tecnico/> para obtener la traducción
-al español de este documento en varios formatos.
-
-Eine deutsche Version dieser Datei finden Sie unter
-<http://www.stefan-winter.de/Changes-2.4.0.txt>.
-
-Chris Ricker (kaboom@gatech.edu or chris.ricker@genetics.utah.edu).
-
Current Minimal Requirements
============================
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index 57a314b14cf8..ad6e0ba7b38c 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -69,10 +69,11 @@ Unregisters new callback with connector core.
struct cb_id *id - unique connector's user identifier.
-void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
+int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
Sends message to the specified groups. It can be safely called from
-any context, but may silently fail under strong memory pressure.
+softirq context, but may silently fail under strong memory pressure.
+If there are no listeners for given group -ESRCH can be returned.
struct cn_msg * - message header(with attached data).
u32 __group - destination group.
diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt
index 068070ff13cd..8bab8461a4af 100644
--- a/Documentation/dvb/avermedia.txt
+++ b/Documentation/dvb/avermedia.txt
@@ -1,4 +1,3 @@
-
HOWTO: Get An Avermedia DVB-T working under Linux
______________________________________________
@@ -137,11 +136,8 @@ Getting the card going
To power up the card, load the following modules in the
following order:
- * insmod dvb-core.o
- * modprobe bttv.o
- * insmod bt878.o
- * insmod dvb-bt8xx.o
- * insmod sp887x.o
+ * modprobe bttv (normally loaded automatically)
+ * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)
Insertion of these modules into the running kernel will
activate the appropriate DVB device nodes. It is then possible
@@ -302,4 +298,4 @@ Further Update
Many thanks to Nigel Pearson for the updates to this document
since the recent revision of the driver.
- January 29th 2004
+ February 14th 2006
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index 52ed462061df..4e7614e606c5 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -1,118 +1,78 @@
-How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working
-==========================================================================
+How to get the bt8xx cards working
+==================================
-This class of cards has a bt878a as the PCI interface, and
-require the bttv driver.
+1) General information
+======================
-Please pay close attention to the warning about the bttv module
-options below for the DST card.
+This class of cards has a bt878a as the PCI interface, and require the bttv driver
+for accessing the i2c bus and the gpio pins of the bt8xx chipset.
+Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
-1) General informations
-=======================
-
-These drivers require the bttv driver to provide the means to access
-the i2c bus and the gpio pins of the bt8xx chipset.
-
-Because of this, you need to enable
-"Device drivers" => "Multimedia devices"
- => "Video For Linux" => "BT848 Video For Linux"
-
-Furthermore you need to enable
-"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards"
+Compiling kernel please enable:
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
+b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
2) Loading Modules
==================
-In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us, plus the common dvb-bt8xx device driver.
-The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst),
-FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded
-automatically by the dvb-bt8xx device driver.
-
-3a) Nebula / Pinnacle PCTV / FusionHDTV Lite
----------------------------------------------
-
- $ modprobe bttv (normally bttv is being loaded automatically by kmod)
- $ modprobe dvb-bt8xx
-
-(or just place dvb-bt8xx in /etc/modules for automatic loading)
-
-
-3b) TwinHan and Clones
---------------------------
+In default cases bttv is loaded automatically.
+To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
- $ modprobe bttv card=0x71
- $ modprobe dvb-bt8xx
- $ modprobe dst
+ $ modprobe dvb-bt8xx
-The value 0x71 will override the PCI type detection for dvb-bt8xx,
-which is necessary for TwinHan cards. Omission of this parameter might result
-in a system lockup.
+All frontends will be loaded automatically.
+People running udev please see Documentation/dvb/udev.txt.
-If you're having an older card (blue color PCB) and card=0x71 locks up
-your machine, try using 0x68, too. If that does not work, ask on the
-mailing list.
+In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
-The DST module takes a couple of useful parameters.
+2a) Running TwinHan and Clones
+------------------------------
-verbose takes values 0 to 4. These values control the verbosity level,
-and can be used to debug also.
+ $ modprobe bttv card=113
+ $ modprobe dvb-bt8xx
+ $ modprobe dst
-verbose=0 means complete disabling of messages
- 1 only error messages are displayed
- 2 notifications are also displayed
- 3 informational messages are also displayed
- 4 debug setting
+Useful parameters for verbosity level and debugging the dst module:
-dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
-0x20 means it has a Conditional Access slot.
+verbose=0: messages are disabled
+ 1: only error messages are displayed
+ 2: notifications are displayed
+ 3: other useful messages are displayed
+ 4: debug setting
+dst_addons=0: card is a free to air (FTA) card only
+ 0x20: card has a conditional access slot for scrambled channels
-The autodetected values are determined by the cards 'response string'
-which you can see in your logs e.g.
+The autodetected values are determined by the cards' "response string".
+In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
+For bug reports please send in a complete log with verbose=4 activated.
+Please also see Documentation/dvb/ci.txt.
-dst_get_device_id: Recognise [DSTMCI]
-
-If you need to sent in bug reports on the dst, please do send in a complete
-log with the verbose=4 module parameter. For general usage, the default setting
-of verbose=1 is ideal.
-
-
-4) Multiple cards
+2b) Running multiple cards
--------------------------
-If you happen to be running multiple cards, it would be advisable to load
-the bttv module with the card id. This would help to solve any module loading
-problems that you might face.
-
-For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite
+Examples of card ID's:
- $ modprobe bttv card=0x71 card=0x87
-
-Here the order of the card id is important and should be the same as that of the
-physical order of the cards. Here card=0x71 represents the Twinhan and clones
-and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be
-specified in decimal, rather than hex:
+Pinnacle PCTV Sat: 94
+Nebula Electronics Digi TV: 104
+pcHDTV HD-2000 TV: 112
+Twinhan DST and clones: 113
+Avermedia AverTV DVB-T 771: 123
+Avermedia AverTV DVB-T 761: 124
+DViCO FusionHDTV DVB-T Lite: 128
+DViCO FusionHDTV 5 Lite: 135
+Notice: The order of the card ID should be uprising:
+Example:
$ modprobe bttv card=113 card=135
+ $ modprobe dvb-bt8xx
-Some examples of card-id's
-
-Pinnacle Sat 0x5e (94)
-Nebula Digi TV 0x68 (104)
-PC HDTV 0x70 (112)
-Twinhan 0x71 (113)
-FusionHDTV DVB-T Lite 0x80 (128)
-FusionHDTV5 Lite 0x87 (135)
-
-For a full list of card-id's, see the V4L Documentation within the kernel
-source: linux/Documentation/video4linux/CARDLIST.bttv
-
-If you have problems with this please do ask on the mailing list.
+For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
+In case of further problems send questions to the mailing list: www.linuxdvb.org.
---
Authors: Richard Walker,
Jamie Honan,
Michael Hunold,
Manu Abraham,
+ Uwe Bugla,
Michael Krufky
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 75c28a174092..bb55f49f2745 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -21,8 +21,9 @@
use File::Temp qw/ tempdir /;
use IO::Handle;
-@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t",
- "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
+ "tda10046lifeview", "av7110", "dec2000t", "dec2540t",
+ "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird");
# Check args
@@ -126,6 +127,24 @@ sub tda10046 {
$outfile;
}
+sub tda10046lifeview {
+ my $sourcefile = "Drv_2.11.02.zip";
+ my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+ my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
+ my $outfile = "dvb-fe-tda10046.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
+ verify("$tmpdir/fwtmp", $hash);
+ copy("$tmpdir/fwtmp", $outfile);
+
+ $outfile;
+}
+
sub av7110 {
my $sourcefile = "dvb-ttpci-01.fw-261d";
my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";
diff --git a/Documentation/dvb/readme.txt b/Documentation/dvb/readme.txt
index f5c50b22de3b..0b0380c91990 100644
--- a/Documentation/dvb/readme.txt
+++ b/Documentation/dvb/readme.txt
@@ -20,11 +20,23 @@ http://linuxtv.org/downloads/
What's inside this directory:
+"avermedia.txt"
+contains detailed information about the
+Avermedia DVB-T cards. See also "bt8xx.txt".
+
+"bt8xx.txt"
+contains detailed information about the
+various bt8xx based "budget" DVB cards.
+
"cards.txt"
contains a list of supported hardware.
+"ci.txt"
+contains detailed information about the
+CI module as part from TwinHan cards and Clones.
+
"contributors.txt"
-is the who-is-who of DVB development
+is the who-is-who of DVB development.
"faq.txt"
contains frequently asked questions and their answers.
@@ -34,19 +46,17 @@ script to download and extract firmware for those devices
that require it.
"ttusb-dec.txt"
-contains detailed informations about the
+contains detailed information about the
TT DEC2000/DEC3000 USB DVB hardware.
-"bt8xx.txt"
-contains detailed installation instructions for the
-various bt8xx based "budget" DVB cards
-(Nebula, Pinnacle PCTV, Twinhan DST)
-
-"README.dibusb"
-contains detailed information about adapters
-based on DiBcom reference design.
-
"udev.txt"
how to get DVB and udev up and running.
+"README.dvb-usb"
+contains detailed information about the DVB USB cards.
+
+"README.flexcop"
+contains detailed information about the
+Technisat- and Flexcop B2C2 drivers.
+
Good luck and have fun!
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 28a31c5e2289..afeaf6218ea2 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -196,3 +196,21 @@ Why: Board specific code doesn't build anymore since ~2.6.0 and no
users have complained indicating there is no more need for these
boards. This should really be considered a last call.
Who: Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What: USB driver API moves to EXPORT_SYMBOL_GPL
+When: Febuary 2008
+Files: include/linux/usb.h, drivers/usb/core/driver.c
+Why: The USB subsystem has changed a lot over time, and it has been
+ possible to create userspace USB drivers using usbfs/libusb/gadgetfs
+ that operate as fast as the USB bus allows. Because of this, the USB
+ subsystem will not be allowing closed source kernel drivers to
+ register with it, after this grace period is over. If anyone needs
+ any help in converting their closed source drivers over to use the
+ userspace filesystems, please contact the
+ linux-usb-devel@lists.sourceforge.net mailing list, and the developers
+ there will be glad to help you out.
+Who: Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt
index 4ef9f7cd5dc3..944aa55e79f8 100644
--- a/Documentation/networking/e100.txt
+++ b/Documentation/networking/e100.txt
@@ -1,16 +1,17 @@
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
-November 17, 2004
-
+November 15, 2005
Contents
========
- In This Release
- Identifying Your Adapter
+- Building and Installation
- Driver Configuration Parameters
- Additional Configurations
+- Known Issues
- Support
@@ -18,18 +19,30 @@ In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
-Adapters, version 3.3.x. This driver supports 2.4.x and 2.6.x kernels.
+Adapters. This driver includes support for Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/100 adapter.
+
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
Identifying Your Adapter
========================
-For more information on how to identify your adapter, go to the Adapter &
+For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
@@ -40,73 +53,75 @@ Driver Configuration Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
-Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
- structure that describes a receive buffer and its attributes to the network
- controller. The data in the descriptor is used by the controller to write
- data from the controller to host memory. In the 3.0.x driver the valid
- range for this parameter is 64-256. The default value is 64. This parameter
- can be changed using the command
-
+Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
+ structure that describes a receive buffer and its attributes to the network
+ controller. The data in the descriptor is used by the controller to write
+ data from the controller to host memory. In the 3.x.x driver the valid range
+ for this parameter is 64-256. The default value is 64. This parameter can be
+ changed using the command:
+
ethtool -G eth? rx n, where n is the number of desired rx descriptors.
-Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a
- data structure that describes a transmit buffer and its attributes to the
- network controller. The data in the descriptor is used by the controller to
- read data from the host memory to the controller. In the 3.0.x driver the
- valid range for this parameter is 64-256. The default value is 64. This
- parameter can be changed using the command
+Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
+ structure that describes a transmit buffer and its attributes to the network
+ controller. The data in the descriptor is used by the controller to read
+ data from the host memory to the controller. In the 3.x.x driver the valid
+ range for this parameter is 64-256. The default value is 64. This parameter
+ can be changed using the command:
ethtool -G eth? tx n, where n is the number of desired tx descriptors.
-Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
- default. Ethtool can be used as follows to force speed/duplex.
+Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
+ default. Ethtool can be used as follows to force speed/duplex.
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
NOTE: setting the speed/duplex to incorrect values will cause the link to
fail.
-Event Log Message Level: The driver uses the message level flag to log events
- to syslog. The message level can be set at driver load time. It can also be
- set using the command
+Event Log Message Level: The driver uses the message level flag to log events
+ to syslog. The message level can be set at driver load time. It can also be
+ set using the command:
ethtool -s eth? msglvl n
+
Additional Configurations
=========================
Configuring the Driver on Different Distributions
-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modules.conf as well as editing other system startup
- scripts and/or configuration files. Many popular Linux distributions ship
- with tools to make these changes for you. To learn the proper way to
- configure a network device for your system, refer to your distribution
- documentation. If during this process you are asked for the driver or module
- name, the name for the Linux Base Driver for the Intel PRO/100 Family of
- Adapters is e100.
+ Configuring a network driver to load properly when the system is started is
+ distribution dependent. Typically, the configuration process involves adding
+ an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing
+ other system startup scripts and/or configuration files. Many popular Linux
+ distributions ship with tools to make these changes for you. To learn the
+ proper way to configure a network device for your system, refer to your
+ distribution documentation. If during this process you are asked for the
+ driver or module name, the name for the Linux Base Driver for the Intel
+ PRO/100 Family of Adapters is e100.
- As an example, if you install the e100 driver for two PRO/100 adapters
- (eth0 and eth1), add the following to modules.conf:
+ As an example, if you install the e100 driver for two PRO/100 adapters
+ (eth0 and eth1), add the following to modules.conf or modprobe.conf:
alias eth0 e100
alias eth1 e100
Viewing Link Messages
---------------------
- In order to see link messages and other Intel driver information on your
- console, you must set the dmesg level up to six. This can be done by
- entering the following on the command line before loading the e100 driver:
+ In order to see link messages and other Intel driver information on your
+ console, you must set the dmesg level up to six. This can be done by
+ entering the following on the command line before loading the e100 driver:
dmesg -n 8
- If you wish to see all messages issued by the driver, including debug
+ If you wish to see all messages issued by the driver, including debug
messages, set the dmesg level to eight.
NOTE: This setting is not saved across reboots.
+
Ethtool
-------
@@ -114,29 +129,27 @@ Additional Configurations
diagnostics, as well as displaying statistical information. Ethtool
version 1.6 or later is required for this functionality.
- The latest release of ethtool can be found at:
- http://sf.net/projects/gkernel.
+ The latest release of ethtool can be found from
+ http://sourceforge.net/projects/gkernel.
- NOTE: This driver uses mii support from the kernel. As a result, when
- there is no link, ethtool will report speed/duplex to be 10/half.
+ NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+ for a more complete ethtool feature set can be enabled by upgrading
+ ethtool to ethtool-1.8.1.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
- WoL is provided through the Ethtool* utility. Ethtool is included with Red
- Hat* 8.0. For other Linux distributions, download and install Ethtool from
- the following website: http://sourceforge.net/projects/gkernel.
+ WoL is provided through the Ethtool* utility. Ethtool is included with Red
+ Hat* 8.0. For other Linux distributions, download and install Ethtool from
+ the following website: http://sourceforge.net/projects/gkernel.
- For instructions on enabling WoL with Ethtool, refer to the Ethtool man
- page.
+ For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
WoL will be enabled on the system during the next shut down or reboot. For
- this driver version, in order to enable WoL, the e100 driver must be
+ this driver version, in order to enable WoL, the e100 driver must be
loaded when shutting down or rebooting the system.
+
NAPI
----
@@ -144,6 +157,25 @@ Additional Configurations
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+ Multiple Interfaces on Same Ethernet Broadcast Network
+ ------------------------------------------------------
+
+ Due to the default ARP behavior on Linux, it is not possible to have
+ one system on two IP networks in the same Ethernet broadcast domain
+ (non-partitioned switch) behave as expected. All Ethernet interfaces
+ will respond to IP traffic for any IP address assigned to the system.
+ This results in unbalanced receive traffic.
+
+ If you have multiple interfaces in a server, either turn on ARP
+ filtering by
+
+ (1) entering: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5), or
+
+ (2) installing the interfaces in separate broadcast domains (either
+ in different switches or in a switch partitioned to VLANs).
+
+
Support
=======
@@ -151,20 +183,24 @@ For general information, go to the Intel support website at:
http://support.intel.com
+ or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related to the
+issue to e1000-devel@lists.sourceforge.net.
License
=======
-This software program is released under the terms of a license agreement
-between you ('Licensee') and Intel. Do not use or load this software or any
-associated materials (collectively, the 'Software') until you have carefully
-read the full terms and conditions of the LICENSE located in this software
-package. By loading or using the Software, you agree to the terms of this
-Agreement. If you do not agree with the terms of this Agreement, do not
-install or use the Software.
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not install
+or use the Software.
* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2ebd4058d46d..71fe15af356c 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,7 +1,7 @@
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
-November 17, 2004
+November 15, 2005
Contents
@@ -20,254 +20,316 @@ In This Release
===============
This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters, version 5.x.x.
+of Adapters. This driver includes support for Itanium(R)2-based systems.
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
+For questions related to hardware requirements, refer to the documentation
+supplied with your Intel PRO/1000 adapter. All hardware requirements listed
apply to use with Linux.
-Native VLANs are now available with supported kernels.
+The following features are now available in supported kernels:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+The driver information previously displayed in the /proc filesystem is not
+supported in this release. Alternatively, you can use ethtool (version 1.6
+or later), lspci, and ifconfig to obtain the same information.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
Identifying Your Adapter
========================
-For more information on how to identify your adapter, go to the Adapter &
+For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
http://support.intel.com/support/network/adapter/pro100/21397.htm
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
http://downloadfinder.intel.com/scripts-df/support_intel.asp
-Command Line Parameters
-=======================
-If the driver is built as a module, the following optional parameters are
-used by entering them on the command line with the modprobe or insmod command
-using this syntax:
+Command Line Parameters =======================
+
+If the driver is built as a module, the following optional parameters
+are used by entering them on the command line with the modprobe or insmod
+command using this syntax:
modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
- insmod e1000 [<option>=<VAL1>,<VAL2>,...]
+ insmod e1000 [<option>=<VAL1>,<VAL2>,...]
For example, with two PRO/1000 PCI adapters, entering:
insmod e1000 TxDescriptors=80,128
-loads the e1000 driver with 80 TX descriptors for the first adapter and 128 TX
-descriptors for the second adapter.
+loads the e1000 driver with 80 TX descriptors for the first adapter and 128
+TX descriptors for the second adapter.
The default value for each parameter is generally the recommended setting,
-unless otherwise noted. Also, if the driver is statically built into the
-kernel, the driver is loaded with the default values for all the parameters.
-Ethtool can be used to change some of the parameters at runtime.
+unless otherwise noted.
+
+NOTES: For more information about the AutoNeg, Duplex, and Speed
+ parameters, see the "Speed and Duplex Configuration" section in
+ this document.
- NOTES: For more information about the AutoNeg, Duplex, and Speed
- parameters, see the "Speed and Duplex Configuration" section in
- this document.
+ For more information about the InterruptThrottleRate,
+ RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+ parameters, see the application note at:
+ http://www.intel.com/design/network/applnots/ap450.htm
- For more information about the InterruptThrottleRate, RxIntDelay,
- TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay parameters, see the
- application note at:
- http://www.intel.com/design/network/applnots/ap450.htm
+ A descriptor describes a data buffer and attributes related to
+ the data buffer. This information is accessed by the hardware.
- A descriptor describes a data buffer and attributes related to the
- data buffer. This information is accessed by the hardware.
-AutoNeg (adapters using copper connections only)
-Valid Range: 0x01-0x0F, 0x20-0x2F
+AutoNeg
+-------
+(Supported only on adapters with copper connections)
+Valid Range: 0x01-0x0F, 0x20-0x2F
Default Value: 0x2F
- This parameter is a bit mask that specifies which speed and duplex
- settings the board advertises. When this parameter is used, the Speed and
- Duplex parameters must not be specified.
- NOTE: Refer to the Speed and Duplex section of this readme for more
- information on the AutoNeg parameter.
-
-Duplex (adapters using copper connections only)
-Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
+
+This parameter is a bit mask that specifies which speed and duplex
+settings the board advertises. When this parameter is used, the Speed
+and Duplex parameters must not be specified.
+
+NOTE: Refer to the Speed and Duplex section of this readme for more
+ information on the AutoNeg parameter.
+
+
+Duplex
+------
+(Supported only on adapters with copper connections)
+Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
Default Value: 0
- Defines the direction in which data is allowed to flow. Can be either one
- or two-directional. If both Duplex and the link partner are set to auto-
- negotiate, the board auto-detects the correct duplex. If the link partner
- is forced (either full or half), Duplex defaults to half-duplex.
+
+Defines the direction in which data is allowed to flow. Can be either
+one or two-directional. If both Duplex and the link partner are set to
+auto-negotiate, the board auto-detects the correct duplex. If the link
+partner is forced (either full or half), Duplex defaults to half-duplex.
+
FlowControl
-Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
-Default: Read flow control settings from the EEPROM
- This parameter controls the automatic generation(Tx) and response(Rx) to
- Ethernet PAUSE frames.
+----------
+Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
+Default Value: Reads flow control settings from the EEPROM
+
+This parameter controls the automatic generation(Tx) and response(Rx)
+to Ethernet PAUSE frames.
+
InterruptThrottleRate
-Valid Range: 100-100000 (0=off, 1=dynamic)
+---------------------
+(not supported on Intel 82542, 82543 or 82544-based adapters)
+Valid Range: 100-100000 (0=off, 1=dynamic)
Default Value: 8000
- This value represents the maximum number of interrupts per second the
- controller generates. InterruptThrottleRate is another setting used in
- interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust
- InterruptThrottleRate based on the current traffic load.
-Un-supported Adapters: InterruptThrottleRate is NOT supported by 82542, 82543
- or 82544-based adapters.
-
- NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
- RxAbsIntDelay parameters. In other words, minimizing the receive
- and/or transmit absolute delays does not force the controller to
- generate more interrupts than what the Interrupt Throttle Rate
- allows.
- CAUTION: If you are using the Intel PRO/1000 CT Network Connection
- (controller 82547), setting InterruptThrottleRate to a value
- greater than 75,000, may hang (stop transmitting) adapters under
- certain network conditions. If this occurs a NETDEV WATCHDOG
- message is logged in the system event log. In addition, the
- controller is automatically reset, restoring the network
- connection. To eliminate the potential for the hang, ensure
- that InterruptThrottleRate is set no greater than 75,000 and is
- not set to 0.
- NOTE: When e1000 is loaded with default settings and multiple adapters are
- in use simultaneously, the CPU utilization may increase non-linearly.
- In order to limit the CPU utilization without impacting the overall
- throughput, we recommend that you load the driver as follows:
-
- insmod e1000.o InterruptThrottleRate=3000,3000,3000
-
- This sets the InterruptThrottleRate to 3000 interrupts/sec for the
- first, second, and third instances of the driver. The range of 2000 to
- 3000 interrupts per second works on a majority of systems and is a
- good starting point, but the optimal value will be platform-specific.
- If CPU utilization is not a concern, use RX_POLLING (NAPI) and default
- driver settings.
+
+This value represents the maximum number of interrupts per second the
+controller generates. InterruptThrottleRate is another setting used in
+interrupt moderation. Dynamic mode uses a heuristic algorithm to adjust
+InterruptThrottleRate based on the current traffic load.
+
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+ RxAbsIntDelay parameters. In other words, minimizing the receive
+ and/or transmit absolute delays does not force the controller to
+ generate more interrupts than what the Interrupt Throttle Rate
+ allows.
+
+CAUTION: If you are using the Intel PRO/1000 CT Network Connection
+ (controller 82547), setting InterruptThrottleRate to a value
+ greater than 75,000, may hang (stop transmitting) adapters
+ under certain network conditions. If this occurs a NETDEV
+ WATCHDOG message is logged in the system event log. In
+ addition, the controller is automatically reset, restoring
+ the network connection. To eliminate the potential for the
+ hang, ensure that InterruptThrottleRate is set no greater
+ than 75,000 and is not set to 0.
+
+NOTE: When e1000 is loaded with default settings and multiple adapters
+ are in use simultaneously, the CPU utilization may increase non-
+ linearly. In order to limit the CPU utilization without impacting
+ the overall throughput, we recommend that you load the driver as
+ follows:
+
+ insmod e1000.o InterruptThrottleRate=3000,3000,3000
+
+ This sets the InterruptThrottleRate to 3000 interrupts/sec for
+ the first, second, and third instances of the driver. The range
+ of 2000 to 3000 interrupts per second works on a majority of
+ systems and is a good starting point, but the optimal value will
+ be platform-specific. If CPU utilization is not a concern, use
+ RX_POLLING (NAPI) and default driver settings.
+
RxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
- 80-4096 for all other supported adapters
+-------------
+Valid Range: 80-256 for 82542 and 82543-based adapters
+ 80-4096 for all other supported adapters
Default Value: 256
- This value is the number of receive descriptors allocated by the driver.
- Increasing this value allows the driver to buffer more incoming packets.
- Each descriptor is 16 bytes. A receive buffer is allocated for each
- descriptor and can either be 2048 or 4096 bytes long, depending on the MTU
- setting. An incoming packet can span one or more receive descriptors.
- The maximum MTU size is 16110.
+This value specifies the number of receive descriptors allocated by the
+driver. Increasing this value allows the driver to buffer more incoming
+packets. Each descriptor is 16 bytes. A receive buffer is also
+allocated for each descriptor and is 2048.
- NOTE: MTU designates the frame size. It only needs to be set for Jumbo
- Frames.
- NOTE: Depending on the available system resources, the request for a
- higher number of receive descriptors may be denied. In this case,
- use a lower number.
RxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range: 0-65535 (0=off)
Default Value: 0
- This value delays the generation of receive interrupts in units of 1.024
- microseconds. Receive interrupt reduction can improve CPU efficiency if
- properly tuned for specific network traffic. Increasing this value adds
- extra latency to frame reception and can end up decreasing the throughput
- of TCP traffic. If the system is reporting dropped receives, this value
- may be set too high, causing the driver to run out of available receive
- descriptors.
-
- CAUTION: When setting RxIntDelay to a value other than 0, adapters may
- hang (stop transmitting) under certain network conditions. If
- this occurs a NETDEV WATCHDOG message is logged in the system
- event log. In addition, the controller is automatically reset,
- restoring the network connection. To eliminate the potential for
- the hang ensure that RxIntDelay is set to 0.
-
-RxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may
+ hang (stop transmitting) under certain network conditions. If
+ this occurs a NETDEV WATCHDOG message is logged in the system
+ event log. In addition, the controller is automatically reset,
+ restoring the network connection. To eliminate the potential
+ for the hang ensure that RxIntDelay is set to 0.
+
+
+RxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range: 0-65535 (0=off)
Default Value: 128
- This value, in units of 1.024 microseconds, limits the delay in which a
- receive interrupt is generated. Useful only if RxIntDelay is non-zero,
- this value ensures that an interrupt is generated after the initial
- packet is received within the set amount of time. Proper tuning,
- along with RxIntDelay, may improve traffic throughput in specific network
- conditions.
-
-Speed (adapters using copper connections only)
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time. Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+
+Speed
+-----
+(This parameter is supported only on adapters with copper connections.)
Valid Settings: 0, 10, 100, 1000
-Default Value: 0 (auto-negotiate at all supported speeds)
- Speed forces the line speed to the specified value in megabits per second
- (Mbps). If this parameter is not specified or is set to 0 and the link
- partner is set to auto-negotiate, the board will auto-detect the correct
- speed. Duplex should also be set when Speed is set to either 10 or 100.
+Default Value: 0 (auto-negotiate at all supported speeds)
+
+Speed forces the line speed to the specified value in megabits per second
+(Mbps). If this parameter is not specified or is set to 0 and the link
+partner is set to auto-negotiate, the board will auto-detect the correct
+speed. Duplex should also be set when Speed is set to either 10 or 100.
+
TxDescriptors
-Valid Range: 80-256 for 82542 and 82543-based adapters
- 80-4096 for all other supported adapters
+-------------
+Valid Range: 80-256 for 82542 and 82543-based adapters
+ 80-4096 for all other supported adapters
Default Value: 256
- This value is the number of transmit descriptors allocated by the driver.
- Increasing this value allows the driver to queue more transmits. Each
- descriptor is 16 bytes.
- NOTE: Depending on the available system resources, the request for a
- higher number of transmit descriptors may be denied. In this case,
- use a lower number.
+This value is the number of transmit descriptors allocated by the driver.
+Increasing this value allows the driver to queue more transmits. Each
+descriptor is 16 bytes.
+
+NOTE: Depending on the available system resources, the request for a
+ higher number of transmit descriptors may be denied. In this case,
+ use a lower number.
+
TxIntDelay
-Valid Range: 0-65535 (0=off)
+----------
+Valid Range: 0-65535 (0=off)
Default Value: 64
- This value delays the generation of transmit interrupts in units of
- 1.024 microseconds. Transmit interrupt reduction can improve CPU
- efficiency if properly tuned for specific network traffic. If the
- system is reporting dropped transmits, this value may be set too high
- causing the driver to run out of available transmit descriptors.
-
-TxAbsIntDelay (82540, 82545 and later adapters only)
-Valid Range: 0-65535 (0=off)
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+
+TxAbsIntDelay
+-------------
+(This parameter is supported only on 82540, 82545 and later adapters.)
+Valid Range: 0-65535 (0=off)
Default Value: 64
- This value, in units of 1.024 microseconds, limits the delay in which a
- transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
- this value ensures that an interrupt is generated after the initial
- packet is sent on the wire within the set amount of time. Proper tuning,
- along with TxIntDelay, may improve traffic throughput in specific
- network conditions.
-
-XsumRX (not available on the 82542-based adapter)
-Valid Range: 0-1
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time. Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+XsumRX
+------
+(This parameter is NOT supported on the 82542-based adapter.)
+Valid Range: 0-1
Default Value: 1
- A value of '1' indicates that the driver should enable IP checksum
- offload for received packets (both UDP and TCP) to the adapter hardware.
+
+A value of '1' indicates that the driver should enable IP checksum
+offload for received packets (both UDP and TCP) to the adapter hardware.
+
Speed and Duplex Configuration
==============================
-Three keywords are used to control the speed and duplex configuration. These
-keywords are Speed, Duplex, and AutoNeg.
+Three keywords are used to control the speed and duplex configuration.
+These keywords are Speed, Duplex, and AutoNeg.
-If the board uses a fiber interface, these keywords are ignored, and the
+If the board uses a fiber interface, these keywords are ignored, and the
fiber interface board only links at 1000 Mbps full-duplex.
For copper-based boards, the keywords interact as follows:
- The default operation is auto-negotiate. The board advertises all supported
- speed and duplex combinations, and it links at the highest common speed and
- duplex mode IF the link partner is set to auto-negotiate.
+ The default operation is auto-negotiate. The board advertises all
+ supported speed and duplex combinations, and it links at the highest
+ common speed and duplex mode IF the link partner is set to auto-negotiate.
- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is
- advertised (The 1000BaseT spec requires auto-negotiation.)
+ If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
+ is advertised (The 1000BaseT spec requires auto-negotiation.)
If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
- negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD
- also be forced.
+ negotiation is disabled, and the AutoNeg parameter is ignored. Partner
+ SHOULD also be forced.
+
+The AutoNeg parameter is used when more control is required over the
+auto-negotiation process. It should be used when you wish to control which
+speed and duplex combinations are advertised during the auto-negotiation
+process.
+
+The parameter may be specified as either a decimal or hexidecimal value as
+determined by the bitmap below.
-The AutoNeg parameter is used when more control is required over the auto-
-negotiation process. When this parameter is used, Speed and Duplex parameters
-must not be specified. The following table describes supported values for the
-AutoNeg parameter:
+Bit position 7 6 5 4 3 2 1 0
+Decimal Value 128 64 32 16 8 4 2 1
+Hex value 80 40 20 10 8 4 2 1
+Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+Duplex Full Full Half Full Half
-Speed (Mbps) 1000 100 100 10 10
-Duplex Full Full Half Full Half
-Value (in base 16) 0x20 0x08 0x04 0x02 0x01
+Some examples of using AutoNeg:
-Example: insmod e1000 AutoNeg=0x03, loads e1000 and specifies (10 full duplex,
-10 half duplex) for negotiation with the peer.
+ modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half)
+ modprobe e1000 AutoNeg=1 (Same as above)
+ modprobe e1000 AutoNeg=0x02 (Restricts autonegotiation to 10 Full)
+ modprobe e1000 AutoNeg=0x03 (Restricts autonegotiation to 10 Half or 10 Full)
+ modprobe e1000 AutoNeg=0x04 (Restricts autonegotiation to 100 Half)
+ modprobe e1000 AutoNeg=0x05 (Restricts autonegotiation to 10 Half or 100
+ Half)
+ modprobe e1000 AutoNeg=0x020 (Restricts autonegotiation to 1000 Full)
+ modprobe e1000 AutoNeg=32 (Same as above)
-Note that setting AutoNeg does not guarantee that the board will link at the
-highest specified speed or duplex mode, but the board will link at the
-highest possible speed/duplex of the link partner IF the link partner is also
-set to auto-negotiate. If the link partner is forced speed/duplex, the
-adapter MUST be forced to the same speed/duplex.
+Note that when this parameter is used, Speed and Duplex must not be specified.
+
+If the link partner is forced to a specific speed and duplex, then this
+parameter should not be used. Instead, use the Speed and Duplex parameters
+previously mentioned to force the adapter to the same speed and duplex.
Additional Configurations
@@ -276,19 +338,19 @@ Additional Configurations
Configuring the Driver on Different Distributions
-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modules.conf as well as editing other system startup
- scripts and/or configuration files. Many popular Linux distributions ship
- with tools to make these changes for you. To learn the proper way to
- configure a network device for your system, refer to your distribution
- documentation. If during this process you are asked for the driver or module
- name, the name for the Linux Base Driver for the Intel PRO/1000 Family of
- Adapters is e1000.
+ Configuring a network driver to load properly when the system is started
+ is distribution dependent. Typically, the configuration process involves
+ adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
+ as editing other system startup scripts and/or configuration files. Many
+ popular Linux distributions ship with tools to make these changes for you.
+ To learn the proper way to configure a network device for your system,
+ refer to your distribution documentation. If during this process you are
+ asked for the driver or module name, the name for the Linux Base Driver
+ for the Intel PRO/1000 Family of Adapters is e1000.
- As an example, if you install the e1000 driver for two PRO/1000 adapters
- (eth0 and eth1) and set the speed and duplex to 10full and 100half, add the
- following to modules.conf:
+ As an example, if you install the e1000 driver for two PRO/1000 adapters
+ (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
+ the following to modules.conf or or modprobe.conf:
alias eth0 e1000
alias eth1 e1000
@@ -297,9 +359,9 @@ Additional Configurations
Viewing Link Messages
---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages on
- your console, set dmesg to eight by entering the following:
+ Link messages will not be displayed to the console if the distribution is
+ restricting system messages. In order to see network driver link messages
+ on your console, set dmesg to eight by entering the following:
dmesg -n 8
@@ -308,22 +370,42 @@ Additional Configurations
Jumbo Frames
------------
- The driver supports Jumbo Frames for all adapters except 82542-based
- adapters. Jumbo Frames support is enabled by changing the MTU to a value
- larger than the default of 1500. Use the ifconfig command to increase the
- MTU size. For example:
+ The driver supports Jumbo Frames for all adapters except 82542 and
+ 82573-based adapters. Jumbo Frames support is enabled by changing the
+ MTU to a value larger than the default of 1500. Use the ifconfig command
+ to increase the MTU size. For example:
+
+ ifconfig eth<x> mtu 9000 up
+
+ This setting is not saved across reboots. It can be made permanent if
+ you add:
+
+ MTU=9000
- ifconfig ethx mtu 9000 up
+ to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
+ applies to the Red Hat distributions; other distributions may store this
+ setting in a different location.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
- with the maximum Jumbo Frames size of 16128.
+ Notes:
- NOTE: Jumbo Frames are supported at 1000 Mbps only. Using Jumbo Frames at
- 10 or 100 Mbps may result in poor performance or loss of link.
+ - To enable Jumbo Frames, increase the MTU size on the interface beyond
+ 1500.
+ - The maximum MTU setting for Jumbo Frames is 16110. This value coincides
+ with the maximum Jumbo Frames size of 16128.
+ - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+ loss of link.
+ - Some Intel gigabit adapters that support Jumbo Frames have a frame size
+ limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
+ The adapters with this limitation are based on the Intel 82571EB and
+ 82572EI controllers, which correspond to these product names:
+ Intel® PRO/1000 PT Dual Port Server Adapter
+ Intel® PRO/1000 PF Dual Port Server Adapter
+ Intel® PRO/1000 PT Server Adapter
+ Intel® PRO/1000 PT Desktop Adapter
+ Intel® PRO/1000 PF Server Adapter
+ - The Intel PRO/1000 PM Network Connection does not support jumbo frames.
- NOTE: MTU designates the frame size. To enable Jumbo Frames, increase the
- MTU size on the interface beyond 1500.
Ethtool
-------
@@ -333,32 +415,41 @@ Additional Configurations
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
- http://sf.net/projects/gkernel.
+ http://sourceforge.net/projects/gkernel.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
+ NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
+ for a more complete ethtool feature set can be enabled by upgrading
+ ethtool to ethtool-1.8.1.
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the Ethtool* utility. Ethtool is included with
- all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
- download and install Ethtool from the following website:
+ all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
+ download and install Ethtool from the following website:
http://sourceforge.net/projects/gkernel.
- For instructions on enabling WoL with Ethtool, refer to the website listed
+ For instructions on enabling WoL with Ethtool, refer to the website listed
above.
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the e1000 driver must be
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
NAPI
----
NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
- or disabled based on the configuration of the kernel.
+ or disabled based on the configuration of the kernel. To override
+ the default, use the following compile-time flags.
+
+ To enable NAPI, compile the driver module, passing in a configuration option:
+
+ make CFLAGS_EXTRA=-DE1000_NAPI install
+
+ To disable NAPI, compile the driver module, passing in a configuration option:
+
+ make CFLAGS_EXTRA=-DE1000_NO_NAPI install
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
@@ -369,10 +460,85 @@ Known Issues
Jumbo Frames System Requirement
-------------------------------
- Memory allocation failures have been observed on Linux systems with 64 MB
- of RAM or less that are running Jumbo Frames. If you are using Jumbo Frames,
- your system may require more than the advertised minimum requirement of 64 MB
- of system memory.
+ Memory allocation failures have been observed on Linux systems with 64 MB
+ of RAM or less that are running Jumbo Frames. If you are using Jumbo
+ Frames, your system may require more than the advertised minimum
+ requirement of 64 MB of system memory.
+
+ Performance Degradation with Jumbo Frames
+ -----------------------------------------
+
+ Degradation in throughput performance may be observed in some Jumbo frames
+ environments. If this is observed, increasing the application's socket
+ buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
+ may help. See the specific application manual and
+ /usr/src/linux*/Documentation/
+ networking/ip-sysctl.txt for more details.
+
+ Jumbo frames on Foundry BigIron 8000 switch
+ -------------------------------------------
+ There is a known issue using Jumbo frames when connected to a Foundry
+ BigIron 8000 switch. This is a 3rd party limitation. If you experience
+ loss of packets, lower the MTU size.
+
+ Multiple Interfaces on Same Ethernet Broadcast Network
+ ------------------------------------------------------
+
+ Due to the default ARP behavior on Linux, it is not possible to have
+ one system on two IP networks in the same Ethernet broadcast domain
+ (non-partitioned switch) behave as expected. All Ethernet interfaces
+ will respond to IP traffic for any IP address assigned to the system.
+ This results in unbalanced receive traffic.
+
+ If you have multiple interfaces in a server, either turn on ARP
+ filtering by entering:
+
+ echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5),
+
+ NOTE: This setting is not saved across reboots. The configuration
+ change can be made permanent by adding the line:
+ net.ipv4.conf.all.arp_filter = 1
+ to the file /etc/sysctl.conf
+
+ or,
+
+ install the interfaces in separate broadcast domains (either in
+ different switches or in a switch partitioned to VLANs).
+
+ 82541/82547 can't link or are slow to link with some link partners
+ -----------------------------------------------------------------
+
+ There is a known compatibility issue with 82541/82547 and some
+ low-end switches where the link will not be established, or will
+ be slow to establish. In particular, these switches are known to
+ be incompatible with 82541/82547:
+
+ Planex FXG-08TE
+ I-O Data ETG-SH8
+
+ To workaround this issue, the driver can be compiled with an override
+ of the PHY's master/slave setting. Forcing master or forcing slave
+ mode will improve time-to-link.
+
+ # make EXTRA_CFLAGS=-DE1000_MASTER_SLAVE=<n>
+
+ Where <n> is:
+
+ 0 = Hardware default
+ 1 = Master mode
+ 2 = Slave mode
+ 3 = Auto master/slave
+
+ Disable rx flow control with ethtool
+ ------------------------------------
+
+ In order to disable receive flow control using ethtool, you must turn
+ off auto-negotiation on the same command line.
+
+ For example:
+
+ ethtool -A eth? autoneg off rx off
Support
@@ -382,20 +548,24 @@ For general information, go to the Intel support website at:
http://support.intel.com
+ or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to
-the issue to linux.nics@intel.com.
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sourceforge.net
License
=======
-This software program is released under the terms of a license agreement
-between you ('Licensee') and Intel. Do not use or load this software or any
-associated materials (collectively, the 'Software') until you have carefully
-read the full terms and conditions of the LICENSE located in this software
-package. By loading or using the Software, you agree to the terms of this
-Agreement. If you do not agree with the terms of this Agreement, do not
+This software program is released under the terms of a license agreement
+between you ('Licensee') and Intel. Do not use or load this software or any
+associated materials (collectively, the 'Software') until you have carefully
+read the full terms and conditions of the file COPYING located in this software
+package. By loading or using the Software, you agree to the terms of this
+Agreement. If you do not agree with the terms of this Agreement, do not
install or use the Software.
* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 26364d06ae92..f12007b80a46 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -355,6 +355,13 @@ somaxconn - INTEGER
Defaults to 128. See also tcp_max_syn_backlog for additional tuning
for TCP sockets.
+tcp_workaround_signed_windows - BOOLEAN
+ If set, assume no receipt of a window scaling option means the
+ remote TCP is broken and treats the window as a signed quantity.
+ If unset, assume the remote TCP is not broken even if we do
+ not receive a window scaling option from them.
+ Default: 0
+
IP Variables:
ip_local_port_range - 2 INTEGERS
@@ -619,6 +626,11 @@ arp_ignore - INTEGER
The max value from conf/{all,interface}/arp_ignore is used
when ARP request is received on the {interface}
+arp_accept - BOOLEAN
+ Define behavior when gratuitous arp replies are received:
+ 0 - drop gratuitous arp frames
+ 1 - accept gratuitous arp frames
+
app_solicit - INTEGER
The maximum number of probes to send to the user space ARP daemon
via netlink before dropping back to multicast probes (see
@@ -717,6 +729,33 @@ accept_ra - BOOLEAN
Functional default: enabled if local forwarding is disabled.
disabled if local forwarding is enabled.
+accept_ra_defrtr - BOOLEAN
+ Learn default router in Router Advertisement.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
+accept_ra_pinfo - BOOLEAN
+ Learn Prefix Inforamtion in Router Advertisement.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
+accept_ra_rt_info_max_plen - INTEGER
+ Maximum prefix length of Route Information in RA.
+
+ Route Information w/ prefix larger than or equal to this
+ variable shall be ignored.
+
+ Functional default: 0 if accept_ra_rtr_pref is enabled.
+ -1 if accept_ra_rtr_pref is disabled.
+
+accept_ra_rtr_pref - BOOLEAN
+ Accept Router Preference in RA.
+
+ Functional default: enabled if accept_ra is enabled.
+ disabled if accept_ra is disabled.
+
accept_redirects - BOOLEAN
Accept Redirects.
@@ -727,8 +766,8 @@ autoconf - BOOLEAN
Autoconfigure addresses using Prefix Information in Router
Advertisements.
- Functional default: enabled if accept_ra is enabled.
- disabled if accept_ra is disabled.
+ Functional default: enabled if accept_ra_pinfo is enabled.
+ disabled if accept_ra_pinfo is disabled.
dad_transmits - INTEGER
The amount of Duplicate Address Detection probes to send.
@@ -771,6 +810,12 @@ mtu - INTEGER
Default Maximum Transfer Unit
Default: 1280 (IPv6 required minimum)
+router_probe_interval - INTEGER
+ Minimum interval (in seconds) between Router Probing described
+ in RFC4191.
+
+ Default: 60
+
router_solicitation_delay - INTEGER
Number of seconds to wait after interface is brought up
before sending Router Solicitations.
diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
index b44dda407ce2..29340282ab5f 100644
--- a/Documentation/usb/et61x251.txt
+++ b/Documentation/usb/et61x251.txt
@@ -176,6 +176,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax: <n[,...]>
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
@@ -266,7 +274,7 @@ the V4L2 interface.
10. Notes for V4L2 application developers
-========================================
+=========================================
This driver follows the V4L2 API specifications. In particular, it enforces two
rules:
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
index c6b76414172c..b957beae5607 100644
--- a/Documentation/usb/sn9c102.txt
+++ b/Documentation/usb/sn9c102.txt
@@ -196,6 +196,14 @@ Description: Force the application to unmap previously mapped buffer memory
1 = force memory unmapping (save memory)
Default: 0
-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax: <n[,...]>
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
@@ -321,6 +329,7 @@ Vendor ID Product ID
--------- ----------
0x0c45 0x6001
0x0c45 0x6005
+0x0c45 0x6007
0x0c45 0x6009
0x0c45 0x600d
0x0c45 0x6024
@@ -370,6 +379,7 @@ HV7131D Hynix Semiconductor, Inc.
MI-0343 Micron Technology, Inc.
OV7630 OmniVision Technologies, Inc.
PAS106B PixArt Imaging, Inc.
+PAS202BCA PixArt Imaging, Inc.
PAS202BCB PixArt Imaging, Inc.
TAS5110C1B Taiwan Advanced Sensor Corporation
TAS5130D1B Taiwan Advanced Sensor Corporation
@@ -493,6 +503,7 @@ Many thanks to following persons for their contribute (listed in alphabetical
order):
- Luca Capello for the donation of a webcam;
+- Philippe Coval for having helped testing the PAS202BCA image sensor;
- Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
donation of a webcam;
- Jon Hollstrom for the donation of a webcam;
diff --git a/Documentation/usb/zc0301.txt b/Documentation/usb/zc0301.txt
new file mode 100644
index 000000000000..f55262c6733b
--- /dev/null
+++ b/Documentation/usb/zc0301.txt
@@ -0,0 +1,254 @@
+
+ ZC0301 Image Processor and Control Chip
+ Driver for Linux
+ =======================================
+
+ - Documentation -
+
+
+Index
+=====
+1. Copyright
+2. Disclaimer
+3. License
+4. Overview and features
+5. Module dependencies
+6. Module loading
+7. Module parameters
+8. Supported devices
+9. Notes for V4L2 application developers
+10. Contact information
+11. Credits
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+This software is not developed or sponsored by Z-Star Microelectronics Corp.
+Trademarks are property of their respective owner.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ZC0301
+Image Processor and Control Chip.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ZC0301 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+ application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+ data transfers;
+- automatic detection of image sensor;
+- video format is standard JPEG;
+- dynamic driver control thanks to various module parameters (see "Module
+ parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+ disconnected from the host many times without turning off the computer, if
+ the system supports hotplugging;
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_DEV=m
+
+ # USB support
+ #
+ CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+ # USB Host Controller Drivers
+ #
+ CONFIG_USB_EHCI_HCD=m
+ CONFIG_USB_UHCI_HCD=m
+ CONFIG_USB_OHCI_HCD=m
+
+The ZC0301 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+ # Sound
+ #
+ CONFIG_SOUND=y
+
+ # Advanced Linux Sound Architecture
+ #
+ CONFIG_SND=m
+
+ # USB devices
+ #
+ CONFIG_SND_USB_AUDIO=m
+
+And finally:
+
+ # USB Multimedia devices
+ #
+ CONFIG_USB_ZC0301=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "zc0301" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+ [root@localhost home]# modprobe zc0301
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+ [user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name: video_nr
+Type: short array (min = 0, max = 64)
+Syntax: <-1|n[,...]>
+Description: Specify V4L2 minor mode number:
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 64 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ registered camera and use auto for the first one and for every
+ other camera.
+Default: -1
+-------------------------------------------------------------------------------
+Name: force_munmap
+Type: bool array (min = 0, max = 64)
+Syntax: <0|1[,...]>
+Description: Force the application to unmap previously mapped buffer memory
+ before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+ all the applications support this feature. This parameter is
+ specific for each detected camera.
+ 0 = do not force memory unmapping
+ 1 = force memory unmapping (save memory)
+Default: 0
+-------------------------------------------------------------------------------
+Name: frame_timeout
+Type: uint array (min = 0, max = 64)
+Syntax: <n[,...]>
+Description: Timeout for a video frame in seconds. This parameter is
+ specific for each detected camera. This parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+Name: debug
+Type: ushort
+Syntax: <n>
+Description: Debugging information level, from 0 to 3:
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = more verbose messages
+ Level 3 is useful for testing only, when only one device
+ is used at the same time. It also shows some more informations
+ about the hardware being detected. This module parameter can be
+ changed at runtime thanks to the /sys filesystem interface.
+Default: 2
+-------------------------------------------------------------------------------
+
+
+8. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ZC0301 Image Processor and Control Chips:
+
+Vendor ID Product ID
+--------- ----------
+0x041e 0x4017
+0x041e 0x401c
+0x041e 0x401e
+0x041e 0x4034
+0x041e 0x4035
+0x046d 0x08ae
+0x0ac8 0x0301
+0x10fd 0x8050
+
+The list above does not imply that all those devices work with this driver: up
+until now only the ones that mount the following image sensors are supported;
+kernel messages will always tell you whether this is the case:
+
+Model Manufacturer
+----- ------------
+PAS202BCB PixArt Imaging, Inc.
+
+
+9. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+
+10. Contact information
+=======================
+The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
+
+
+11. Credits
+===========
+- Informations about the chip internals needed to enable the I2C protocol have
+ been taken from the documentation of the ZC030x Video4Linux1 driver written
+ by Andrew Birkett <andy@nobugs.org>;
+- The initialization values of the ZC0301 controller connected to the PAS202BCB
+ image sensor have been taken from the SPCA5XX driver maintained by
+ Michel Xhaard <mxhaard@magic.fr>.
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 8bea3fbd0548..3b39a91b24bd 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -43,3 +43,5 @@
42 -> digitalnow DNTV Live! DVB-T Pro [1822:0025]
43 -> KWorld/VStream XPert DVB-T with cx22702 [17de:08a1]
44 -> DViCO FusionHDTV DVB-T Dual Digital [18ac:db50,18ac:db54]
+ 45 -> KWorld HardwareMpegTV XPert [17de:0840]
+ 46 -> DViCO FusionHDTV DVB-T Hybrid [18ac:db40,18ac:db44]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index a0c7cad20971..a3026689bbe6 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -8,3 +8,4 @@
7 -> Leadtek Winfast USB II (em2800)
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207]
+ 12 -> Kworld PVR TV 2800 RF (em2820/em2840)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index da4fb890165f..8c7195455963 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -83,3 +83,12 @@
82 -> MSI TV@Anywhere plus [1462:6231]
83 -> Terratec Cinergy 250 PCI TV [153b:1160]
84 -> LifeView FlyDVB Trio [5168:0319]
+ 85 -> AverTV DVB-T 777 [1461:2c05]
+ 86 -> LifeView FlyDVB-T [5168:0301]
+ 87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
+ 88 -> Tevion/KWorld DVB-T 220RF [17de:7201]
+ 89 -> ELSA EX-VISION 700TV [1048:226c]
+ 90 -> Kworld ATSC110 [17de:7350]
+ 91 -> AVerMedia A169 B [1461:7360]
+ 92 -> AVerMedia A169 B1 [1461:6360]
+ 93 -> Medion 7134 Bridge #2 [16be:0005]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index f6d0cf7b7922..1bcdac67dd8c 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -64,8 +64,10 @@ tuner=62 - Philips TEA5767HN FM Radio
tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner
tuner=64 - LG TDVS-H062F/TUA6034
tuner=65 - Ymec TVF66T5-B/DFF
-tuner=66 - LG NTSC (TALN mini series)
+tuner=66 - LG TALN series
tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in
-tuner=69 - Tena TNF 5335 MF
+tuner=69 - Tena TNF 5335 and similar models
tuner=70 - Samsung TCPN 2121P30A
+tuner=71 - Xceive xc3028
+tuner=72 - Thomson FE6600
diff --git a/Documentation/video4linux/README.cpia2 b/Documentation/video4linux/README.cpia2
new file mode 100644
index 000000000000..ce8213d28b67
--- /dev/null
+++ b/Documentation/video4linux/README.cpia2
@@ -0,0 +1,130 @@
+$Id: README,v 1.7 2005/08/29 23:39:57 sbertin Exp $
+
+1. Introduction
+
+ This is a driver for STMicroelectronics's CPiA2 (second generation
+Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
+stream at up to vga size. It implements the Video4Linux interface as much as
+possible. Since the V4L interface does not support compressed formats, only
+an mjpeg enabled application can be used with the camera. We have modified the
+gqcam application to view this stream.
+
+ The driver is implemented as two kernel modules. The cpia2 module
+contains the camera functions and the V4L interface. The cpia2_usb module
+contains usb specific functions. The main reason for this was the size of the
+module was getting out of hand, so I separted them. It is not likely that
+there will be a parallel port version.
+
+FEATURES:
+ - Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
+ sensors. I only have the vga sensor, so can't test the other.
+ - Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
+ VGA and QVGA are the native image sizes for the VGA camera. CIF is done
+ in the coprocessor by scaling QVGA. All other sizes are done by clipping.
+ - Palette: YCrCb, compressed with MJPEG.
+ - Some compression parameters are settable.
+ - Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
+ - Adjust brightness, color, contrast while streaming.
+ - Flicker control settable for 50 or 60 Hz mains frequency.
+
+2. Making and installing the stv672 driver modules:
+
+ Requirements:
+ -------------
+ This should work with 2.4 (2.4.23 and later) and 2.6 kernels, but has
+only been tested on 2.6. Video4Linux must be either compiled into the kernel or
+available as a module. Video4Linux2 is automatically detected and made
+available at compile time.
+
+ Compiling:
+ ----------
+ As root, do a make install. This will compile and install the modules
+into the media/video directory in the module tree. For 2.4 kernels, use
+Makefile_2.4 (aka do make -f Makefile_2.4 install).
+
+ Setup:
+ ------
+ Use 'modprobe cpia2' to load and 'modprobe -r cpia2' to unload. This
+may be done automatically by your distribution.
+
+3. Driver options
+
+ Option Description
+ ------ -----------
+ video_nr video device to register (0=/dev/video0, etc)
+ range -1 to 64. default is -1 (first available)
+ If you have more than 1 camera, this MUST be -1.
+ buffer_size Size for each frame buffer in bytes (default 68k)
+ num_buffers Number of frame buffers (1-32, default 3)
+ alternate USB Alternate (2-7, default 7)
+ flicker_freq Frequency for flicker reduction(50 or 60, default 60)
+ flicker_mode 0 to disable, or 1 to enable flicker reduction.
+ (default 0). This is only effective if the camera
+ uses a stv0672 coprocessor.
+
+ Setting the options:
+ --------------------
+ If you are using modules, edit /etc/modules.conf and add an options
+line like this:
+ options cpia2 num_buffers=3 buffer_size=65535
+
+ If the driver is compiled into the kernel, at boot time specify them
+like this:
+ cpia2.num_buffers=3 cpia2.buffer_size=65535
+
+ What buffer size should I use?
+ ------------------------------
+ The maximum image size depends on the alternate you choose, and the
+frame rate achieved by the camera. If the compression engine is able to
+keep up with the frame rate, the maximum image size is given by the table
+below.
+ The compression engine starts out at maximum compression, and will
+increase image quality until it is close to the size in the table. As long
+as the compression engine can keep up with the frame rate, after a short time
+the images will all be about the size in the table, regardless of resolution.
+ At low alternate settings, the compression engine may not be able to
+compress the image enough and will reduce the frame rate by producing larger
+images.
+ The default of 68k should be good for most users. This will handle
+any alternate at frame rates down to 15fps. For lower frame rates, it may
+be necessary to increase the buffer size to avoid having frames dropped due
+to insufficient space.
+
+ Image size(bytes)
+ Alternate bytes/ms 15fps 30fps
+ 2 128 8533 4267
+ 3 384 25600 12800
+ 4 640 42667 21333
+ 5 768 51200 25600
+ 6 896 59733 29867
+ 7 1023 68200 34100
+
+ How many buffers should I use?
+ ------------------------------
+ For normal streaming, 3 should give the best results. With only 2,
+it is possible for the camera to finish sending one image just after a
+program has started reading the other. If this happens, the driver must drop
+a frame. The exception to this is if you have a heavily loaded machine. In
+this case use 2 buffers. You are probably not reading at the full frame rate.
+If the camera can send multiple images before a read finishes, it could
+overwrite the third buffer before the read finishes, leading to a corrupt
+image. Single and double buffering have extra checks to avoid overwriting.
+
+4. Using the camera
+
+ We are providing a modified gqcam application to view the output. In
+order to avoid confusion, here it is called mview. There is also the qx5view
+program which can also control the lights on the qx5 microscope. MJPEG Tools
+(http://mjpeg.sourceforge.net) can also be used to record from the camera.
+
+5. Notes to developers:
+
+ - This is a driver version stripped of the 2.4 back compatibility
+ and old MJPEG ioctl API. See cpia2.sf.net for 2.4 support.
+
+6. Thanks:
+
+ - Peter Pregler <Peter_Pregler@email.com>,
+ Scott J. Bertin <scottbertin@yahoo.com>, and
+ Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
+ this one was modelled from.
diff --git a/Documentation/video4linux/cpia2_overview.txt b/Documentation/video4linux/cpia2_overview.txt
new file mode 100644
index 000000000000..a6e53665216b
--- /dev/null
+++ b/Documentation/video4linux/cpia2_overview.txt
@@ -0,0 +1,38 @@
+ Programmer's View of Cpia2
+
+Cpia2 is the second generation video coprocessor from VLSI Vision Ltd (now a
+division of ST Microelectronics). There are two versions. The first is the
+STV0672, which is capable of up to 30 frames per second (fps) in frame sizes
+up to CIF, and 15 fps for VGA frames. The STV0676 is an improved version,
+which can handle up to 30 fps VGA. Both coprocessors can be attached to two
+CMOS sensors - the vvl6410 CIF sensor and the vvl6500 VGA sensor. These will
+be referred to as the 410 and the 500 sensors, or the CIF and VGA sensors.
+
+The two chipsets operate almost identically. The core is an 8051 processor,
+running two different versions of firmware. The 672 runs the VP4 video
+processor code, the 676 runs VP5. There are a few differences in register
+mappings for the two chips. In these cases, the symbols defined in the
+header files are marked with VP4 or VP5 as part of the symbol name.
+
+The cameras appear externally as three sets of registers. Setting register
+values is the only way to control the camera. Some settings are
+interdependant, such as the sequence required to power up the camera. I will
+try to make note of all of these cases.
+
+The register sets are called blocks. Block 0 is the system block. This
+section is always powered on when the camera is plugged in. It contains
+registers that control housekeeping functions such as powering up the video
+processor. The video processor is the VP block. These registers control
+how the video from the sensor is processed. Examples are timing registers,
+user mode (vga, qvga), scaling, cropping, framerates, and so on. The last
+block is the video compressor (VC). The video stream sent from the camera is
+compressed as Motion JPEG (JPEGA). The VC controls all of the compression
+parameters. Looking at the file cpia2_registers.h, you can get a full view
+of these registers and the possible values for most of them.
+
+One or more registers can be set or read by sending a usb control message to
+the camera. There are three modes for this. Block mode requests a number
+of contiguous registers. Random mode reads or writes random registers with
+a tuple structure containing address/value pairs. The repeat mode is only
+used by VP4 to load a firmware patch. It contains a starting address and
+a sequence of bytes to be written into a gpio port. \ No newline at end of file