diff options
author | Arnd Bergmann <arnd@arndb.de> | 2014-11-28 16:15:14 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2014-11-28 16:15:14 +0100 |
commit | e155aee2b279b099da5c5cfd6df5795e7388ece1 (patch) | |
tree | 36c4469f2e86ea0e2f12ffa54ee78bfb56ba3d06 /arch/arm/mach-at91 | |
parent | 81cc3f868d30884c6f2d2bf5d1861fbeb24ddebd (diff) | |
parent | 4fdfb67f24b64844ac110622bb51b2ee0f894492 (diff) | |
download | linux-e155aee2b279b099da5c5cfd6df5795e7388ece1.tar.gz linux-e155aee2b279b099da5c5cfd6df5795e7388ece1.tar.bz2 linux-e155aee2b279b099da5c5cfd6df5795e7388ece1.zip |
Merge tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup
Pull "Third batch of cleanup/SoC for 3.19" from Nicolas Ferre:
- fixes following legacy board removal
- removal of legacy board support for at91sam9263, at91sam9260/at91sam9g20
and at91sam9261/at91sam9g10 SoCs families. Please use DT now.
- removal of some now useless Kconfig options
* tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/Kconfig: remove useless fbdev Kconfig options
ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
ARM: at91/Kconfig: remove unused config options
ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files
ARM: at91: remove at91sam9263 legacy board support
ARM: at91/at91sam9g45: remove useless header file
Conflicts:
arch/arm/mach-at91/at91sam9g45.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/mach-at91')
23 files changed, 0 insertions, 9786 deletions
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt index 22963a829e5c..5fc138da89fb 100644 --- a/arch/arm/mach-at91/Kconfig.non_dt +++ b/arch/arm/mach-at91/Kconfig.non_dt @@ -15,34 +15,8 @@ config ARCH_AT91RM9200 select AT91_USE_OLD_CLK select OLD_IRQ_AT91 -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" - select SOC_AT91SAM9260 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9261 - bool "AT91SAM9261 or AT91SAM9G10" - select SOC_AT91SAM9261 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - -config ARCH_AT91SAM9263 - bool "AT91SAM9263" - select SOC_AT91SAM9263 - select AT91_USE_OLD_CLK - select OLD_IRQ_AT91 - endchoice -config ARCH_AT91SAM9G20 - bool - select ARCH_AT91SAM9260 - -config ARCH_AT91SAM9G10 - bool - select ARCH_AT91SAM9261 - # ---------------------------------------------------------- if ARCH_AT91RM9200 @@ -129,152 +103,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT91SAM9260 - -comment "AT91SAM9260 Variants" - -comment "AT91SAM9260 / AT91SAM9XE Board Type" - -config MACH_AT91SAM9260EK - bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> - -config MACH_CAM60 - bool "KwikByte KB9260 (CAM60) board" - help - Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. - <http://www.kwikbyte.com/KB9260.html> - -config MACH_SAM9_L9260 - bool "Olimex SAM9-L9260 board" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. - <http://www.olimex.com/dev/sam9-L9260.html> - -config MACH_AFEB9260 - bool "Custom afeb9260 board v1" - help - Select this if you are using custom afeb9260 board based on - open hardware design. Select this for revision 1 of the board. - <svn://194.85.238.22/home/users/george/svn/arm9eb> - <http://groups.google.com/group/arm9fpga-evolution-board> - -config MACH_CPU9260 - bool "Eukrea CPU9260 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9260 Board <http://www.eukrea.com/> - -config MACH_FLEXIBITY - bool "Flexibity Connect board" - help - Select this if you are using Flexibity Connect board - <http://www.flexibity.com> - -comment "AT91SAM9G20 Board Type" - -config MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit - that embeds only one SD/MMC slot. - -config MACH_AT91SAM9G20EK_2MMC - depends on MACH_AT91SAM9G20EK - bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and - onwards. - <http://www.atmel.com/tools/SAM9G20-EK.aspx> - -config MACH_CPU9G20 - bool "Eukrea CPU9G20 board" - help - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board <http://www.eukrea.com/> - -config MACH_PORTUXG20 - bool "taskit PortuxG20" - help - Select this if you are using taskit's PortuxG20. - <http://www.taskit.de/en/> - -config MACH_STAMP9G20 - bool "taskit Stamp9G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on its - evaluation board. - <http://www.taskit.de/en/> - -config MACH_PCONTROL_G20 - bool "PControl G20 CPU module" - help - Select this if you are using taskit's Stamp9G20 CPU module on this - carrier board, being the decentralized unit of a building automation - system; featuring nvram, eth-switch, iso-rs485, display, io - -config MACH_GSIA18S - bool "GS_IA18_S board" - help - This enables support for the GS_IA18_S board - produced by GeoSIG Ltd company. This is an internet accelerograph. - <http://www.geosig.com> - -config MACH_SNAPPER_9260 - bool "Bluewater Systems Snapper 9260/9G20 module" - help - Select this if you are using the Bluewater Systems Snapper 9260 or - Snapper 9G20 modules. - <http://www.bluewatersys.com/> -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9261 - -comment "AT91SAM9261 Board Type" - -config MACH_AT91SAM9261EK - bool "Atmel AT91SAM9261-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> - -comment "AT91SAM9G10 Board Type" - -config MACH_AT91SAM9G10EK - bool "Atmel AT91SAM9G10-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> - -endif - -# ---------------------------------------------------------- - -if ARCH_AT91SAM9263 - -comment "AT91SAM9263 Board Type" - -config MACH_AT91SAM9263EK - bool "Atmel AT91SAM9263-EK Evaluation Kit" - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. - <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> - -endif - -# ---------------------------------------------------------- - comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ae8aa1a898e8..b2495d71f7ac 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -21,9 +21,6 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o @@ -40,32 +37,6 @@ obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o obj-$(CONFIG_MACH_ECO920) += board-eco920.o -# AT91SAM9260 board-specific support -obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o -obj-$(CONFIG_MACH_CAM60) += board-cam60.o -obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o -obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o -obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o -obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o - -# AT91SAM9261 board-specific support -obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o -obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o - -# AT91SAM9263 board-specific support -obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o - -# AT91SAM9G20 board-specific support -obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o -obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o -obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o -obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o - -# AT91SAM9260/AT91SAM9G20 board-specific support -obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o - # AT91SAM board with device-tree obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index aab1f969a7c3..78137c24d90b 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -10,305 +10,13 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/cpu.h> #include <mach/at91_dbgu.h> -#include <mach/at91sam9260.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9260_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk adc_clk = { - .name = "adc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_ADC, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk adc_op_clk = { - .name = "adc_op_clk", - .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 5000000, -}; - -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9260_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc_clk = { - .name = "ssc_clk", - .pmc_mask = 1 << AT91SAM9260_ID_SSC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9260_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9260_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9260_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart3_clk = { - .name = "usart3_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart4_clk = { - .name = "usart4_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart5_clk = { - .name = "usart5_clk", - .pmc_mask = 1 << AT91SAM9260_ID_US5, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc3_clk = { - .name = "tc3_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc4_clk = { - .name = "tc4_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC4, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc5_clk = { - .name = "tc5_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC5, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &adc_clk, - &adc_op_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &macb_clk, - &isi_clk, - &usart3_clk, - &usart4_clk, - &usart5_clk, - &tc3_clk, - &tc4_clk, - &tc5_clk, - // irq0 .. irq2 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), - /* more usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), - CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), - CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), - CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), - /* more tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), -}; - -/* - * The two programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; - -static void __init at91sam9260_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); -} -#else -#define at91sam9260_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9260_gpio[] __initdata = { - { - .id = AT91SAM9260_ID_PIOA, - .regbase = AT91SAM9260_BASE_PIOA, - }, { - .id = AT91SAM9260_ID_PIOB, - .regbase = AT91SAM9260_BASE_PIOB, - }, { - .id = AT91SAM9260_ID_PIOC, - .regbase = AT91SAM9260_BASE_PIOC, - } -}; /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization @@ -340,119 +48,14 @@ static void __init at91sam9260_map_io(void) at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE); } -static void __init at91sam9260_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512); - at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); - at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9260_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9260_gpio, 3); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_RSTC, - .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9260_BASE_SDRAMC, - .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SHDWC, - .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9260_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 0, /* Analog-to-Digital Converter */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 2, /* USB Device Port */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller */ - 0, - 0, - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 2, /* USB Host port */ - 3, /* Ethernet */ - 0, /* Image Sensor Interface */ - 5, /* USART 3 */ - 5, /* USART 4 */ - 5, /* USART 5 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -static void __init at91sam9260_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9260) .map_io = at91sam9260_map_io, - .default_irq_priority = at91sam9260_default_irq_priority, - .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) - | (1 << AT91SAM9260_ID_IRQ2), - .ioremap_registers = at91sam9260_ioremap_registers, - .register_clocks = at91sam9260_register_clocks, - .register_devices = at91sam9260_register_devices, .init = at91sam9260_initialize, - .init_time = at91sam9260_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c deleted file mode 100644 index ef88e0fe4e80..000000000000 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ /dev/null @@ -1,1364 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9260_devices.c - * - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/platform_data/at91_adc.h> - -#include <mach/cpu.h> -#include <mach/at91sam9260.h> -#include <mach/at91sam9260_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9260_UHP_BASE, - .end = AT91SAM9260_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_UDP, - .end = AT91SAM9260_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_EMAC, - .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91sam9260_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD Slot for Atmel MCI Driver - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_MCI, - .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - unsigned int i; - unsigned int slot_count = 0; - - if (!data) - return; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (data->slot[i].bus_width) { - /* input/irq */ - if (gpio_is_valid(data->slot[i].detect_pin)) { - at91_set_gpio_input(data->slot[i].detect_pin, 1); - at91_set_deglitch(data->slot[i].detect_pin, 1); - } - if (gpio_is_valid(data->slot[i].wp_pin)) - at91_set_gpio_input(data->slot[i].wp_pin, 1); - - switch (i) { - case 0: - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA6, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - slot_count++; - break; - case 1: - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->slot[i].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA3, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - } - } - - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA8, 0); - - mmc_data = *data; - platform_device_register(&at91sam9260_mmc_device); - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9260_BASE_ECC, - .end = AT91SAM9260_BASE_ECC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9260_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91sam9260_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA23, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA24, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9260_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9260_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TWI, - .end = AT91SAM9260_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_twi_device = { - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* IP version is not the same on 9260 and g20 */ - if (cpu_is_at91sam9g20()) { - at91sam9260_twi_device.name = "i2c-at91sam9g20"; - } else { - at91sam9260_twi_device.name = "i2c-at91sam9260"; - } - - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA23, 1); - - at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA24, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9260_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SPI0, - .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SPI1, - .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9260_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9260_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TCB0, - .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_tcb0_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb0_resources, - .num_resources = ARRAY_SIZE(tcb0_resources), -}; - -static struct resource tcb1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_TCB1, - .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_tcb1_device = { - .name = "atmel_tcb", - .id = 1, - .resource = tcb1_resources, - .num_resources = ARRAY_SIZE(tcb1_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9260_tcb0_device); - platform_device_register(&at91sam9260_tcb1_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9260_BASE_RTT, - .end = AT91SAM9260_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9260_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9260_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9260_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9260_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9260_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9260_BASE_WDT, - .end = AT91SAM9260_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9260_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9260_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_SSC, - .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_ssc_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc_resources, - .num_resources = ARRAY_SIZE(ssc_resources), -}; - -static inline void configure_ssc_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB17, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB16, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB18, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB19, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB20, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB21, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9260_ID_SSC: - pdev = &at91sam9260_ssc_device; - configure_ssc_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_DBGU, - .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US0, - .end = AT91SAM9260_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - if (pins & ATMEL_UART_DTR) - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - if (pins & ATMEL_UART_DSR) - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - if (pins & ATMEL_UART_DCD) - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - if (pins & ATMEL_UART_RI) - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US1, - .end = AT91SAM9260_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US2, - .end = AT91SAM9260_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ -} - -static struct resource uart3_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US3, - .end = AT91SAM9260_BASE_US3 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart3_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart3_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart3_device = { - .name = "atmel_usart", - .id = 4, - .dev = { - .dma_mask = &uart3_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart3_data, - }, - .resource = uart3_resources, - .num_resources = ARRAY_SIZE(uart3_resources), -}; - -static inline void configure_usart3_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ -} - -static struct resource uart4_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US4, - .end = AT91SAM9260_BASE_US4 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart4_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart4_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart4_device = { - .name = "atmel_usart", - .id = 5, - .dev = { - .dma_mask = &uart4_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart4_data, - }, - .resource = uart4_resources, - .num_resources = ARRAY_SIZE(uart4_resources), -}; - -static inline void configure_usart4_pins(void) -{ - at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */ - at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */ -} - -static struct resource uart5_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_US5, - .end = AT91SAM9260_BASE_US5 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart5_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart5_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9260_uart5_device = { - .name = "atmel_usart", - .id = 6, - .dev = { - .dma_mask = &uart5_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart5_data, - }, - .resource = uart5_resources, - .num_resources = ARRAY_SIZE(uart5_resources), -}; - -static inline void configure_usart5_pins(void) -{ - at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9260_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9260_ID_US0: - pdev = &at91sam9260_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9260_ID_US1: - pdev = &at91sam9260_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9260_ID_US2: - pdev = &at91sam9260_uart2_device; - configure_usart2_pins(pins); - break; - case AT91SAM9260_ID_US3: - pdev = &at91sam9260_uart3_device; - configure_usart3_pins(pins); - break; - case AT91SAM9260_ID_US4: - pdev = &at91sam9260_uart4_device; - configure_usart4_pins(); - break; - case AT91SAM9260_ID_US5: - pdev = &at91sam9260_uart5_device; - configure_usart5_pins(); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - -/* -------------------------------------------------------------------- - * CF/IDE - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ - defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) - -static struct at91_cf_data cf0_data; - -static struct resource cf0_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_4, - .end = AT91_CHIPSELECT_4 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cf0_device = { - .id = 0, - .dev = { - .platform_data = &cf0_data, - }, - .resource = cf0_resources, - .num_resources = ARRAY_SIZE(cf0_resources), -}; - -static struct at91_cf_data cf1_data; - -static struct resource cf1_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_5, - .end = AT91_CHIPSELECT_5 + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cf1_device = { - .id = 1, - .dev = { - .platform_data = &cf1_data, - }, - .resource = cf1_resources, - .num_resources = ARRAY_SIZE(cf1_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - struct platform_device *pdev; - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - - switch (data->chipselect) { - case 4: - at91_set_multi_drive(AT91_PIN_PC8, 0); - at91_set_A_periph(AT91_PIN_PC8, 0); - csa |= AT91_MATRIX_CS4A_SMC_CF1; - cf0_data = *data; - pdev = &cf0_device; - break; - case 5: - at91_set_multi_drive(AT91_PIN_PC9, 0); - at91_set_A_periph(AT91_PIN_PC9, 0); - csa |= AT91_MATRIX_CS5A_SMC_CF2; - cf1_data = *data; - pdev = &cf1_device; - break; - default: - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", - data->chipselect); - return; - } - - at91_matrix_write(AT91_MATRIX_EBICSA, csa); - - if (gpio_is_valid(data->rst_pin)) { - at91_set_multi_drive(data->rst_pin, 0); - at91_set_gpio_output(data->rst_pin, 1); - } - - if (gpio_is_valid(data->irq_pin)) { - at91_set_gpio_input(data->irq_pin, 0); - at91_set_deglitch(data->irq_pin, 1); - } - - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 0); - at91_set_deglitch(data->det_pin, 1); - } - - at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */ - at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */ - at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */ - - if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)) - pdev->name = "pata_at91"; - else - pdev->name = "at91_cf"; - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_cf(struct at91_cf_data * data) {} -#endif - -/* -------------------------------------------------------------------- - * ADCs - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_AT91_ADC) -static struct at91_adc_data adc_data; - -static struct resource adc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_ADC, - .end = AT91SAM9260_BASE_ADC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_adc_device = { - .name = "at91sam9260-adc", - .id = -1, - .dev = { - .platform_data = &adc_data, - }, - .resource = adc_resources, - .num_resources = ARRAY_SIZE(adc_resources), -}; - -static struct at91_adc_trigger at91_adc_triggers[] = { - [0] = { - .name = "timer-counter-0", - .value = 0x1, - }, - [1] = { - .name = "timer-counter-1", - .value = 0x3, - }, - [2] = { - .name = "timer-counter-2", - .value = 0x5, - }, - [3] = { - .name = "external", - .value = 0xd, - .is_external = true, - }, -}; - -void __init at91_add_device_adc(struct at91_adc_data *data) -{ - if (!data) - return; - - if (test_bit(0, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC0, 0); - if (test_bit(1, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC1, 0); - if (test_bit(2, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC2, 0); - if (test_bit(3, &data->channels_used)) - at91_set_A_periph(AT91_PIN_PC3, 0); - - if (data->use_external_triggers) - at91_set_A_periph(AT91_PIN_PA22, 0); - - data->startup_time = 10; - data->trigger_number = 4; - data->trigger_list = at91_adc_triggers; - - adc_data = *data; - platform_device_register(&at91_adc_device); -} -#else -void __init at91_add_device_adc(struct at91_adc_data *data) {} -#endif - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - if (of_have_populated_dt()) - return 0; - - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index a8bd35963332..d29953ecb0c4 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -10,282 +10,12 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> #include <mach/cpu.h> -#include <mach/at91sam9261.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT91SAM9261_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT91SAM9261_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9261_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9261_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9261_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &lcdc_clk, - // irq0 .. irq2 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1), - CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk), - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioC_clk), - /* more lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), - CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), - CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0), - CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1), - CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), - CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91sam9261_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - - clk_register(&hck0); - clk_register(&hck1); -} -#else -#define at91sam9261_register_clocks NULL -#endif -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9261_gpio[] __initdata = { - { - .id = AT91SAM9261_ID_PIOA, - .regbase = AT91SAM9261_BASE_PIOA, - }, { - .id = AT91SAM9261_ID_PIOB, - .regbase = AT91SAM9261_BASE_PIOB, - }, { - .id = AT91SAM9261_ID_PIOC, - .regbase = AT91SAM9261_BASE_PIOC, - } -}; /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization @@ -299,119 +29,14 @@ static void __init at91sam9261_map_io(void) at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } -static void __init at91sam9261_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512); - at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); - at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9261_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9261_gpio, 3); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_RSTC, - .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9261_BASE_SDRAMC, - .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SHDWC, - .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9261_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C */ - 0, - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 2, /* USB Device Port */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 2, /* USB Host port */ - 3, /* LCD Controller */ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -static void __init at91sam9261_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9261) .map_io = at91sam9261_map_io, - .default_irq_priority = at91sam9261_default_irq_priority, - .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) - | (1 << AT91SAM9261_ID_IRQ2), - .ioremap_registers = at91sam9261_ioremap_registers, - .register_clocks = at91sam9261_register_clocks, - .register_devices = at91sam9261_register_devices, .init = at91sam9261_initialize, - .init_time = at91sam9261_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c deleted file mode 100644 index 29baacb5c359..000000000000 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ /dev/null @@ -1,1098 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9261_devices.c - * - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9261.h> -#include <mach/at91sam9261_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9261_UHP_BASE, - .end = AT91SAM9261_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91sam9261_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_UDP, - .end = AT91SAM9261_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91sam9261_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_MCI, - .end = AT91SAM9261_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_mmc_device = { - .name = "atmel_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - if (!data) - return; - - if (data->slot[0].bus_width) { - /* input/irq */ - if (gpio_is_valid(data->slot[0].detect_pin)) { - at91_set_gpio_input(data->slot[0].detect_pin, 1); - at91_set_deglitch(data->slot[0].detect_pin, 1); - } - if (gpio_is_valid(data->slot[0].wp_pin)) - at91_set_gpio_input(data->slot[0].wp_pin, 1); - - /* CLK */ - at91_set_B_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->slot[0].bus_width == 4) { - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA6, 1); - } - - mmc_data = *data; - platform_device_register(&at91sam9261_mmc_device); - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device atmel_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&atmel_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PA7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PA8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9261_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PA7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PA8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9261_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_TWI, - .end = AT91SAM9261_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_twi_device = { - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* IP version is not the same on 9261 and g10 */ - if (cpu_is_at91sam9g10()) { - at91sam9261_twi_device.name = "i2c-at91sam9g10"; - /* I2C PIO must not be configured as open-drain on this chip */ - } else { - at91sam9261_twi_device.name = "i2c-at91sam9261"; - at91_set_multi_drive(AT91_PIN_PA7, 1); - at91_set_multi_drive(AT91_PIN_PA8, 1); - } - - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9261_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SPI0, - .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SPI1, - .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91sam9261_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9261_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9261_LCDC_BASE, - .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -#if defined(CONFIG_FB_INTSRAM) - [2] = { - .start = AT91SAM9261_SRAM_BASE, - .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -#endif -}; - -static struct platform_device at91_lcdc_device = { - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) { - return; - } - - if (cpu_is_at91sam9g10()) - at91_lcdc_device.name = "at91sam9g10-lcdfb"; - else - at91_lcdc_device.name = "at91sam9261-lcdfb"; - -#if defined(CONFIG_FB_ATMEL_STN) - at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ - at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ -#else - at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ - at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ - at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ - at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ - at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ - at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ - at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ -#endif - - if (ARRAY_SIZE(lcdc_resources) > 2) { - void __iomem *fb; - struct resource *fb_res = &lcdc_resources[2]; - size_t fb_len = resource_size(fb_res); - - fb = ioremap(fb_res->start, fb_len); - if (fb) { - memset(fb, 0, fb_len); - iounmap(fb); - } - } - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_TCB0, - .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at91sam9261_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91SAM9261_BASE_RTT, - .end = AT91SAM9261_BASE_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9261_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - at91sam9261_rtt_device.name = "rtc-at91sam9"; - /* - * The second resource is needed: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9261_rtt_device.num_resources = 3; - rtt_resources[1].start = AT91SAM9261_BASE_GPBR + - 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - rtt_resources[1].end = rtt_resources[1].start + 3; - rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9261_rtt_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9261_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9261_BASE_WDT, - .end = AT91SAM9261_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9261_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9261_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC0, - .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB21, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB22, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB23, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB24, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB25, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB26, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC1, - .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PA17, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PA18, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PA19, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PA20, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PA21, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PA22, 1); -} - -static u64 ssc2_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc2_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_SSC2, - .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9261_ssc2_device = { - .name = "at91rm9200_ssc", - .id = 2, - .dev = { - .dma_mask = &ssc2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc2_resources, - .num_resources = ARRAY_SIZE(ssc2_resources), -}; - -static inline void configure_ssc2_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PC25, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PC26, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PC27, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PC28, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PC29, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PC30, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9261_ID_SSC0: - pdev = &at91sam9261_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9261_ID_SSC1: - pdev = &at91sam9261_ssc1_device; - configure_ssc1_pins(pins); - break; - case AT91SAM9261_ID_SSC2: - pdev = &at91sam9261_ssc2_device; - configure_ssc2_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_DBGU, - .end = AT91SAM9261_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US0, - .end = AT91SAM9261_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US1, - .end = AT91SAM9261_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9261_BASE_US2, - .end = AT91SAM9261_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9261_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9261_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9261_ID_US0: - pdev = &at91sam9261_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9261_ID_US1: - pdev = &at91sam9261_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9261_ID_US2: - pdev = &at91sam9261_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index fbff228cc63e..e7ad14864083 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -10,304 +10,11 @@ * */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/proc-fns.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> #include <asm/system_misc.h> -#include <mach/at91sam9263.h> #include <mach/hardware.h> -#include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "sam9_smc.h" -#include "pm.h" - -#if defined(CONFIG_OLD_CLK_AT91) -#include "clock.h" -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioCDE_clk = { - .name = "pioCDE_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT91SAM9263_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc0_clk = { - .name = "mci0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_MCI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc1_clk = { - .name = "mci1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_MCI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can_clk = { - .name = "can_clk", - .pmc_mask = 1 << AT91SAM9263_ID_CAN, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi_clk = { - .name = "twi_clk", - .pmc_mask = 1 << AT91SAM9263_ID_TWI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT91SAM9263_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ac97_clk = { - .name = "ac97_clk", - .pmc_mask = 1 << AT91SAM9263_ID_AC97C, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tcb_clk = { - .name = "tcb_clk", - .pmc_mask = 1 << AT91SAM9263_ID_TCB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pwm_clk = { - .name = "pwm_clk", - .pmc_mask = 1 << AT91SAM9263_ID_PWMC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "pclk", - .pmc_mask = 1 << AT91SAM9263_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk dma_clk = { - .name = "dma_clk", - .pmc_mask = 1 << AT91SAM9263_ID_DMA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twodge_clk = { - .name = "2dge_clk", - .pmc_mask = 1 << AT91SAM9263_ID_2DGE, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT91SAM9263_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk isi_clk = { - .name = "isi_clk", - .pmc_mask = 1 << AT91SAM9263_ID_ISI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk lcdc_clk = { - .name = "lcdc_clk", - .pmc_mask = 1 << AT91SAM9263_ID_LCDC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT91SAM9263_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioCDE_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc0_clk, - &mmc1_clk, - &can_clk, - &twi_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ac97_clk, - &tcb_clk, - &pwm_clk, - &macb_clk, - &twodge_clk, - &udc_clk, - &isi_clk, - &lcdc_clk, - &dma_clk, - &ohci_clk, - // irq0 .. irq1 -}; - -static struct clk_lookup periph_clocks_lookups[] = { - /* One additional fake clock for macb_hclk */ - CLKDEV_CON_ID("hclk", &macb_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk), - CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk), - CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), - /* fake hclk clock */ - CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), - CLKDEV_CON_ID("pioA", &pioA_clk), - CLKDEV_CON_ID("pioB", &pioB_clk), - CLKDEV_CON_ID("pioC", &pioCDE_clk), - CLKDEV_CON_ID("pioD", &pioCDE_clk), - CLKDEV_CON_ID("pioE", &pioCDE_clk), - /* more usart lookup table for DT entries */ - CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), - CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk), - /* more tc lookup table for DT entries */ - CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk), - CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), - CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), - CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The four programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static void __init at91sam9263_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); -} -#else -#define at91sam9263_register_clocks NULL -#endif - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at91sam9263_gpio[] __initdata = { - { - .id = AT91SAM9263_ID_PIOA, - .regbase = AT91SAM9263_BASE_PIOA, - }, { - .id = AT91SAM9263_ID_PIOB, - .regbase = AT91SAM9263_BASE_PIOB, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOC, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOD, - }, { - .id = AT91SAM9263_ID_PIOCDE, - .regbase = AT91SAM9263_BASE_PIOE, - } -}; /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization @@ -319,121 +26,15 @@ static void __init at91sam9263_map_io(void) at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } -static void __init at91sam9263_ioremap_registers(void) -{ - at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512); - at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512); - at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); - at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); - at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); - at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX); - at91_pm_set_standby(at91sam9_sdram_standby); -} - static void __init at91sam9263_initialize(void) { arm_pm_idle = at91sam9_idle; at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0); at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1); - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9263_gpio, 5); -} - -static struct resource rstc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_RSTC, - .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9263_BASE_SDRAMC0, - .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rstc_device = { - .name = "at91-sam9260-reset", - .resource = rstc_resources, - .num_resources = ARRAY_SIZE(rstc_resources), -}; - -static struct resource shdwc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SHDWC, - .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device shdwc_device = { - .name = "at91-poweroff", - .resource = shdwc_resources, - .num_resources = ARRAY_SIZE(shdwc_resources), -}; - -static void __init at91sam9263_register_devices(void) -{ - platform_device_register(&rstc_device); - platform_device_register(&shdwc_device); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A */ - 1, /* Parallel IO Controller B */ - 1, /* Parallel IO Controller C, D and E */ - 0, - 0, - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 0, /* Multimedia Card Interface 0 */ - 0, /* Multimedia Card Interface 1 */ - 3, /* CAN */ - 6, /* Two-Wire Interface */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 4, /* Serial Synchronous Controller 0 */ - 4, /* Serial Synchronous Controller 1 */ - 5, /* AC97 Controller */ - 0, /* Timer Counter 0, 1 and 2 */ - 0, /* Pulse Width Modulation Controller */ - 3, /* Ethernet */ - 0, - 0, /* 2D Graphic Engine */ - 2, /* USB Device Port */ - 0, /* Image Sensor Interface */ - 3, /* LDC Controller */ - 0, /* DMA Controller */ - 0, - 2, /* USB Host port */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -}; - -static void __init at91sam9263_init_time(void) -{ - at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS); } AT91_SOC_START(at91sam9263) .map_io = at91sam9263_map_io, - .default_irq_priority = at91sam9263_default_irq_priority, - .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1), - .ioremap_registers = at91sam9263_ioremap_registers, - .register_clocks = at91sam9263_register_clocks, - .register_devices = at91sam9263_register_devices, .init = at91sam9263_initialize, - .init_time = at91sam9263_init_time, AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c deleted file mode 100644 index cef0e2f57068..000000000000 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ /dev/null @@ -1,1538 +0,0 @@ -/* - * arch/arm/mach-at91/at91sam9263_devices.c - * - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/i2c-gpio.h> - -#include <linux/fb.h> -#include <video/atmel_lcdc.h> - -#include <mach/at91sam9263.h> -#include <mach/at91sam9263_matrix.h> -#include <mach/at91_matrix.h> -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT91SAM9263_UHP_BASE, - .end = AT91SAM9263_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - int i; - - if (!data) - return; - - /* Enable VBus control for UHP ports */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->vbus_pin[i])) - at91_set_gpio_output(data->vbus_pin[i], - data->vbus_pin_active_low[i]); - } - - /* Enable overcurrent notification */ - for (i = 0; i < data->ports; i++) { - if (gpio_is_valid(data->overcurrent_pin[i])) - at91_set_gpio_input(data->overcurrent_pin[i], 1); - } - - usbh_data = *data; - platform_device_register(&at91_usbh_device); -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE) -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_UDP, - .end = AT91SAM9263_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->vbus_pin)) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally by USB device peripheral */ - - udc_data = *data; - platform_device_register(&at91_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct macb_platform_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_EMAC, - .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct macb_platform_data *data) -{ - if (!data) - return; - - if (gpio_is_valid(data->phy_irq_pin)) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Pins used for MII and RMII */ - at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ - - if (!data->is_rmii) { - at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ - } - - eth_data = *data; - platform_device_register(&at91sam9263_eth_device); -} -#else -void __init at91_add_device_eth(struct macb_platform_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if IS_ENABLED(CONFIG_MMC_ATMELMCI) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct mci_platform_data mmc0_data, mmc1_data; - -static struct resource mmc0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_MCI0, - .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_mmc0_device = { - .name = "atmel_mci", - .id = 0, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc0_data, - }, - .resource = mmc0_resources, - .num_resources = ARRAY_SIZE(mmc0_resources), -}; - -static struct resource mmc1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_MCI1, - .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_mmc1_device = { - .name = "atmel_mci", - .id = 1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc1_data, - }, - .resource = mmc1_resources, - .num_resources = ARRAY_SIZE(mmc1_resources), -}; - -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) -{ - unsigned int i; - unsigned int slot_count = 0; - - if (!data) - return; - - for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - - if (!data->slot[i].bus_width) - continue; - - /* input/irq */ - if (gpio_is_valid(data->slot[i].detect_pin)) { - at91_set_gpio_input(data->slot[i].detect_pin, - 1); - at91_set_deglitch(data->slot[i].detect_pin, - 1); - } - if (gpio_is_valid(data->slot[i].wp_pin)) - at91_set_gpio_input(data->slot[i].wp_pin, 1); - - if (mmc_id == 0) { /* MCI0 */ - switch (i) { - case 0: /* slot A */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); - } - slot_count++; - break; - case 1: /* slot B */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); - - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } - } else if (mmc_id == 1) { /* MCI1 */ - switch (i) { - case 0: /* slot A */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - slot_count++; - break; - case 1: /* slot B */ - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->slot[i].bus_width == 4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - slot_count++; - break; - default: - printk(KERN_ERR - "AT91: SD/MMC slot %d not available\n", i); - break; - } - if (slot_count) { - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); - } - } - } -} -#else -void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * Compact Flash (PCMCIA or IDE) - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \ - defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) - -static struct at91_cf_data cf0_data; - -static struct resource cf0_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_4, - .end = AT91_CHIPSELECT_4 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf0_device = { - .id = 0, - .dev = { - .platform_data = &cf0_data, - }, - .resource = cf0_resources, - .num_resources = ARRAY_SIZE(cf0_resources), -}; - -static struct at91_cf_data cf1_data; - -static struct resource cf1_resources[] = { - [0] = { - .start = AT91_CHIPSELECT_5, - .end = AT91_CHIPSELECT_5 + SZ_256M - 1, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - } -}; - -static struct platform_device cf1_device = { - .id = 1, - .dev = { - .platform_data = &cf1_data, - }, - .resource = cf1_resources, - .num_resources = ARRAY_SIZE(cf1_resources), -}; - -void __init at91_add_device_cf(struct at91_cf_data *data) -{ - unsigned long ebi0_csa; - struct platform_device *pdev; - - if (!data) - return; - - /* - * assign CS4 or CS5 to SMC with Compact Flash logic support, - * we assume SMC timings are configured by board code, - * except True IDE where timings are controlled by driver - */ - ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); - switch (data->chipselect) { - case 4: - at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1; - cf0_data = *data; - pdev = &cf0_device; - break; - case 5: - at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */ - ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2; - cf1_data = *data; - pdev = &cf1_device; - break; - default: - printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n", - data->chipselect); - return; - } - at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa); - - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - - if (gpio_is_valid(data->irq_pin)) { - at91_set_gpio_input(data->irq_pin, 1); - at91_set_deglitch(data->irq_pin, 1); - } - - if (gpio_is_valid(data->vcc_pin)) - /* initially off */ - at91_set_gpio_output(data->vcc_pin, 0); - - /* enable EBI controlled pins */ - at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */ - at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */ - at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */ - at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */ - - pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf"; - platform_device_register(pdev); -} -#else -void __init at91_add_device_cf(struct at91_cf_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - [0] = { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91SAM9263_BASE_ECC0, - .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9263_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_matrix_read(AT91_MATRIX_EBI0CSA); - at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (gpio_is_valid(data->enable_pin)) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (gpio_is_valid(data->rdy_pin)) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (gpio_is_valid(data->det_pin)) - at91_set_gpio_input(data->det_pin, 1); - - nand_data = *data; - platform_device_register(&at91sam9263_nand_device); -} -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PB4, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PB5, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at91sam9263_twi_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9263_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_TWI, - .end = AT91SAM9263_BASE_TWI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_twi_device = { - .name = "i2c-at91sam9260", - .id = 0, - .resource = twi_resources, - .num_resources = ARRAY_SIZE(twi_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI interface */ - at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB4, 1); - - at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB5, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at91sam9263_twi_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SPI0, - .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SPI1, - .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (!gpio_is_valid(cs_pin)) - continue; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at91sam9263_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - - platform_device_register(&at91sam9263_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * AC97 - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE) -static u64 ac97_dmamask = DMA_BIT_MASK(32); -static struct ac97c_platform_data ac97_data; - -static struct resource ac97_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_AC97C, - .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ac97_device = { - .name = "atmel_ac97c", - .id = 0, - .dev = { - .dma_mask = &ac97_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ac97_data, - }, - .resource = ac97_resources, - .num_resources = ARRAY_SIZE(ac97_resources), -}; - -void __init at91_add_device_ac97(struct ac97c_platform_data *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */ - at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */ - at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */ - at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */ - - /* reset */ - if (gpio_is_valid(data->reset_pin)) - at91_set_gpio_output(data->reset_pin, 0); - - ac97_data = *data; - platform_device_register(&at91sam9263_ac97_device); -} -#else -void __init at91_add_device_ac97(struct ac97c_platform_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * CAN Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE) -static struct resource can_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_CAN, - .end = AT91SAM9263_BASE_CAN + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_can_device = { - .name = "at91_can", - .id = -1, - .resource = can_resources, - .num_resources = ARRAY_SIZE(can_resources), -}; - -void __init at91_add_device_can(struct at91_can_data *data) -{ - at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */ - at91sam9263_can_device.dev.platform_data = data; - - platform_device_register(&at91sam9263_can_device); -} -#else -void __init at91_add_device_can(struct at91_can_data *data) {} -#endif - -/* -------------------------------------------------------------------- - * LCD Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = DMA_BIT_MASK(32); -static struct atmel_lcdfb_pdata lcdc_data; - -static struct resource lcdc_resources[] = { - [0] = { - .start = AT91SAM9263_LCDC_BASE, - .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91_lcdc_device = { - .name = "at91sam9263-lcdfb", - .id = 0, - .dev = { - .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &lcdc_data, - }, - .resource = lcdc_resources, - .num_resources = ARRAY_SIZE(lcdc_resources), -}; - -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) -{ - if (!data) - return; - - at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ - at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ - at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ - at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ - at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ - at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ - at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ - at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ - at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ - at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ - at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ - at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ - at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ - at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ - at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ - - lcdc_data = *data; - platform_device_register(&at91_lcdc_device); -} -#else -void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Image Sensor Interface - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) - -struct resource isi_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_ISI, - .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_isi_device = { - .name = "at91_isi", - .id = -1, - .resource = isi_resources, - .num_resources = ARRAY_SIZE(isi_resources), -}; - -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) -{ - at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ - at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ - at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ - at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ - at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ - at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ - at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ - at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ - at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ - at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ - at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ - at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ - at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ - at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ - at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ - - if (use_pck_as_mck) { - at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ - - /* TODO: register the PCK for ISI_MCK and set its parent */ - } -} -#else -void __init at91_add_device_isi(struct isi_platform_data *data, - bool use_pck_as_mck) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter block - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_TCB0, - .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -#if defined(CONFIG_OF) -static struct of_device_id tcb_ids[] = { - { .compatible = "atmel,at91rm9200-tcb" }, - { /*sentinel*/ } -}; -#endif - -static void __init at91_add_device_tc(void) -{ -#if defined(CONFIG_OF) - struct device_node *np; - - np = of_find_matching_node(NULL, tcb_ids); - if (np) { - of_node_put(np); - return; - } -#endif - - platform_device_register(&at91sam9263_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt0_resources[] = { - { - .start = AT91SAM9263_BASE_RTT0, - .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9263_rtt0_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt0_resources, -}; - -static struct resource rtt1_resources[] = { - { - .start = AT91SAM9263_BASE_RTT1, - .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1, - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_MEM, - }, { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9263_rtt1_device = { - .name = "at91_rtt", - .id = 1, - .resource = rtt1_resources, -}; - -#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9) -static void __init at91_add_device_rtt_rtc(void) -{ - struct platform_device *pdev; - struct resource *r; - - switch (CONFIG_RTC_DRV_AT91SAM9_RTT) { - case 0: - /* - * The second resource is needed only for the chosen RTT: - * GPBR will serve as the storage for RTC time offset - */ - at91sam9263_rtt0_device.num_resources = 3; - at91sam9263_rtt1_device.num_resources = 1; - pdev = &at91sam9263_rtt0_device; - r = rtt0_resources; - break; - case 1: - at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 3; - pdev = &at91sam9263_rtt1_device; - r = rtt1_resources; - break; - default: - pr_err("at91sam9263: only supports 2 RTT (%d)\n", - CONFIG_RTC_DRV_AT91SAM9_RTT); - return; - } - - pdev->name = "rtc-at91sam9"; - r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; - r[1].end = r[1].start + 3; - r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; - r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; -} -#else -static void __init at91_add_device_rtt_rtc(void) -{ - /* Only one resource is needed: RTT not used as RTC */ - at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 1; -} -#endif - -static void __init at91_add_device_rtt(void) -{ - at91_add_device_rtt_rtc(); - platform_device_register(&at91sam9263_rtt0_device); - platform_device_register(&at91sam9263_rtt1_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct resource wdt_resources[] = { - { - .start = AT91SAM9263_BASE_WDT, - .end = AT91SAM9263_BASE_WDT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at91sam9263_wdt_device = { - .name = "at91_wdt", - .id = -1, - .resource = wdt_resources, - .num_resources = ARRAY_SIZE(wdt_resources), -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at91sam9263_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * PWM - * --------------------------------------------------------------------*/ - -#if IS_ENABLED(CONFIG_PWM_ATMEL) -static struct resource pwm_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_PWMC, - .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_pwm0_device = { - .name = "at91sam9rl-pwm", - .id = -1, - .resource = pwm_resources, - .num_resources = ARRAY_SIZE(pwm_resources), -}; - -void __init at91_add_device_pwm(u32 mask) -{ - if (mask & (1 << AT91_PWM0)) - at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */ - - if (mask & (1 << AT91_PWM1)) - at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */ - - if (mask & (1 << AT91_PWM2)) - at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */ - - if (mask & (1 << AT91_PWM3)) - at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */ - - platform_device_register(&at91sam9263_pwm0_device); -} -#else -void __init at91_add_device_pwm(u32 mask) {} -#endif - - -/* -------------------------------------------------------------------- - * SSC -- Synchronous Serial Controller - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) -static u64 ssc0_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SSC0, - .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ssc0_device = { - .name = "at91rm9200_ssc", - .id = 0, - .dev = { - .dma_mask = &ssc0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc0_resources, - .num_resources = ARRAY_SIZE(ssc0_resources), -}; - -static inline void configure_ssc0_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_B_periph(AT91_PIN_PB0, 1); - if (pins & ATMEL_SSC_TK) - at91_set_B_periph(AT91_PIN_PB1, 1); - if (pins & ATMEL_SSC_TD) - at91_set_B_periph(AT91_PIN_PB2, 1); - if (pins & ATMEL_SSC_RD) - at91_set_B_periph(AT91_PIN_PB3, 1); - if (pins & ATMEL_SSC_RK) - at91_set_B_periph(AT91_PIN_PB4, 1); - if (pins & ATMEL_SSC_RF) - at91_set_B_periph(AT91_PIN_PB5, 1); -} - -static u64 ssc1_dmamask = DMA_BIT_MASK(32); - -static struct resource ssc1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_SSC1, - .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9263_ssc1_device = { - .name = "at91rm9200_ssc", - .id = 1, - .dev = { - .dma_mask = &ssc1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ssc1_resources, - .num_resources = ARRAY_SIZE(ssc1_resources), -}; - -static inline void configure_ssc1_pins(unsigned pins) -{ - if (pins & ATMEL_SSC_TF) - at91_set_A_periph(AT91_PIN_PB6, 1); - if (pins & ATMEL_SSC_TK) - at91_set_A_periph(AT91_PIN_PB7, 1); - if (pins & ATMEL_SSC_TD) - at91_set_A_periph(AT91_PIN_PB8, 1); - if (pins & ATMEL_SSC_RD) - at91_set_A_periph(AT91_PIN_PB9, 1); - if (pins & ATMEL_SSC_RK) - at91_set_A_periph(AT91_PIN_PB10, 1); - if (pins & ATMEL_SSC_RF) - at91_set_A_periph(AT91_PIN_PB11, 1); -} - -/* - * SSC controllers are accessed through library code, instead of any - * kind of all-singing/all-dancing driver. For example one could be - * used by a particular I2S audio codec's driver, while another one - * on the same system might be used by a custom data capture driver. - */ -void __init at91_add_device_ssc(unsigned id, unsigned pins) -{ - struct platform_device *pdev; - - /* - * NOTE: caller is responsible for passing information matching - * "pins" to whatever will be using each particular controller. - */ - switch (id) { - case AT91SAM9263_ID_SSC0: - pdev = &at91sam9263_ssc0_device; - configure_ssc0_pins(pins); - break; - case AT91SAM9263_ID_SSC1: - pdev = &at91sam9263_ssc1_device; - configure_ssc1_pins(pins); - break; - default: - return; - } - - platform_device_register(pdev); -} - -#else -void __init at91_add_device_ssc(unsigned id, unsigned pins) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) - -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_DBGU, - .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91_ID_SYS, - .end = NR_IRQS_LEGACY + AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US0, - .end = AT91SAM9263_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US1, - .end = AT91SAM9263_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT91SAM9263_BASE_US2, - .end = AT91SAM9263_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, - .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at91sam9263_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at91sam9263_dbgu_device; - configure_dbgu_pins(); - break; - case AT91SAM9263_ID_US0: - pdev = &at91sam9263_uart0_device; - configure_usart0_pins(pins); - break; - case AT91SAM9263_ID_US1: - pdev = &at91sam9263_uart1_device; - configure_usart1_pins(pins); - break; - case AT91SAM9263_ID_US2: - pdev = &at91sam9263_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } -} -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- */ -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - if (of_have_populated_dt()) - return 0; - - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index dcd867143c75..b6117bea9a6f 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -12,7 +12,6 @@ #include <asm/system_misc.h> #include <asm/irq.h> -#include <mach/cpu.h> #include <mach/hardware.h> #include "soc.h" diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c deleted file mode 100644 index e76e35ce81e7..000000000000 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-afeb-9260v1.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2008 Sergey Lapin - * - * A custom board designed as open hardware; PCBs and various information - * is available at http://groups.google.com/group/arm9fpga-evolution-board/ - * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/clk.h> -#include <linux/dma-mapping.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - - -static void __init afeb9260_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata afeb9260_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata afeb9260_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - - -/* - * SPI devices. - */ -static struct spi_board_info afeb9260_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata afeb9260_macb_data = { - .phy_irq_pin = AT91_PIN_PA9, - .is_rmii = 0, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata afeb9260_nand_partition[] = { - { - .name = "bootloader", - .offset = 0, - .size = (640 * SZ_1K), - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = SZ_2M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata afeb9260_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .ecc_mode = NAND_ECC_SOFT, - .parts = afeb9260_nand_partition, - .num_parts = ARRAY_SIZE(afeb9260_nand_partition), - .det_pin = -EINVAL, -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata afeb9260_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - }, -}; - - - -static struct i2c_board_info __initdata afeb9260_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, { - I2C_BOARD_INFO("fm3130", 0x68), - }, { - I2C_BOARD_INFO("24c64", 0x50), - }, -}; - -/* - * IDE (CF True IDE mode) - */ -static struct at91_cf_data afeb9260_cf_data = { - .chipselect = 4, - .irq_pin = AT91_PIN_PA6, - .det_pin = -EINVAL, - .vcc_pin = -EINVAL, - .rst_pin = AT91_PIN_PA7, - .flags = AT91_CF_TRUE_IDE, -}; - -static void __init afeb9260_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&afeb9260_usbh_data); - /* USB Device */ - at91_add_device_udc(&afeb9260_udc_data); - /* SPI */ - at91_add_device_spi(afeb9260_spi_devices, - ARRAY_SIZE(afeb9260_spi_devices)); - /* NAND */ - at91_add_device_nand(&afeb9260_nand_data); - /* Ethernet */ - at91_add_device_eth(&afeb9260_macb_data); - - /* Standard function's pin assignments are not - * appropriate for us and generic code provide - * no API to configure these pins any other way */ - at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ - /* MMC */ - at91_add_device_mci(0, &afeb9260_mci0_data); - /* I2C */ - at91_add_device_i2c(afeb9260_i2c_devices, - ARRAY_SIZE(afeb9260_i2c_devices)); - /* Audio */ - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - /* IDE */ - at91_add_device_cf(&afeb9260_cf_data); -} - -MACHINE_START(AFEB9260, "Custom afeb9260 board") - /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = afeb9260_init_early, - .init_irq = at91_init_irq_default, - .init_machine = afeb9260_board_init, -MACHINE_END - diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c deleted file mode 100644 index ae827dd2d0d2..000000000000 --- a/arch/arm/mach-at91/board-cam60.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * KwikByte CAM60 (KB9260) - * - * based on board-sam9260ek.c - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init cam60_init_early(void) -{ - /* Initialize processor: 10 MHz crystal */ - at91_initialize(10000000); -} - -/* - * USB Host - */ -static struct at91_usbh_data __initdata cam60_usbh_data = { - .ports = 1, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * SPI devices. - */ -#if defined(CONFIG_MTD_DATAFLASH) -static struct mtd_partition cam60_spi_partitions[] = { - { - .name = "BOOT1", - .offset = 0, - .size = 4 * 1056, - }, - { - .name = "BOOT2", - .offset = MTDPART_OFS_NXTBLK, - .size = 256 * 1056, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = 2222 * 1056, - }, - { - .name = "file system", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data cam60_spi_flash_platform_data = { - .name = "spi_flash", - .parts = cam60_spi_partitions, - .nr_parts = ARRAY_SIZE(cam60_spi_partitions) -}; -#endif - -static struct spi_board_info cam60_spi_devices[] __initdata = { -#if defined(CONFIG_MTD_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - .platform_data = &cam60_spi_flash_platform_data - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data cam60_macb_data __initdata = { - .phy_irq_pin = AT91_PIN_PB5, - .is_rmii = 0, -}; - - -/* - * NAND Flash - */ -static struct mtd_partition __initdata cam60_nand_partition[] = { - { - .name = "nand_fs", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata cam60_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA9, - .enable_pin = AT91_PIN_PA7, - .ecc_mode = NAND_ECC_SOFT, - .parts = cam60_nand_partition, - .num_parts = ARRAY_SIZE(cam60_nand_partition), -}; - -static struct sam9_smc_config __initdata cam60_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init cam60_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &cam60_nand_smc_config); - - at91_add_device_nand(&cam60_nand_data); -} - - -static void __init cam60_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* SPI */ - at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); - /* Ethernet */ - at91_add_device_eth(&cam60_macb_data); - /* USB Host */ - /* enable USB power supply circuit */ - at91_set_gpio_output(AT91_PIN_PB18, 1); - at91_add_device_usbh(&cam60_usbh_data); - /* NAND */ - cam60_add_device_nand(); -} - -MACHINE_START(CAM60, "KwikByte CAM60") - /* Maintainer: KwikByte */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cam60_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cam60_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c deleted file mode 100644 index 731c8318f4f5..000000000000 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ /dev/null @@ -1,386 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-cpu9krea.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2009 Eric Benard - eric@eukrea.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/mtd/physmap.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/at91sam9260_matrix.h> -#include <mach/at91_matrix.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -static void __init cpu9krea_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata cpu9krea_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata cpu9krea_udc_data = { - .vbus_pin = AT91_PIN_PC8, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata cpu9krea_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -/* - * NAND flash - */ -static struct atmel_nand_data __initdata cpu9krea_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; -#endif - -static void __init cpu9krea_add_device_nand(void) -{ - sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config); - at91_add_device_nand(&cpu9krea_nand_data); -} - -/* - * NOR flash - */ -static struct physmap_flash_data cpuat9260_nor_data = { - .width = 2, -}; - -#define NOR_BASE AT91_CHIPSELECT_0 -#define NOR_SIZE SZ_64M - -static struct resource nor_flash_resources[] = { - { - .start = NOR_BASE, - .end = NOR_BASE + NOR_SIZE - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device cpu9krea_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &cpuat9260_nor_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -#ifdef CONFIG_MACH_CPU9260 -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 10, - .nrd_pulse = 10, - .ncs_write_pulse = 6, - .nwe_pulse = 6, - - .read_cycle = 12, - .write_cycle = 8, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#else -static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 13, - .nrd_pulse = 13, - .ncs_write_pulse = 8, - .nwe_pulse = 8, - - .read_cycle = 15, - .write_cycle = 10, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE - | AT91_SMC_DBW_16, - .tdf_cycles = 2, -}; -#endif - -static __init void cpu9krea_add_device_nor(void) -{ - unsigned long csa; - - csa = at91_matrix_read(AT91_MATRIX_EBICSA); - at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V); - - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config); - - platform_device_register(&cpu9krea_nor_flash); -} - -/* - * LEDs - */ -static struct gpio_led cpu9krea_leds[] = { - { /* LED1 */ - .name = "LED1", - .gpio = AT91_PIN_PC11, - .active_low = 1, - .default_trigger = "timer", - }, - { /* LED2 */ - .name = "LED2", - .gpio = AT91_PIN_PC12, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* LED3 */ - .name = "LED3", - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "none", - }, - { /* LED4 */ - .name = "LED4", - .gpio = AT91_PIN_PC9, - .active_low = 1, - .default_trigger = "none", - } -}; - -static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, -}; - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button cpu9krea_buttons[] = { - { - .gpio = AT91_PIN_PC3, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PB20, - .code = BTN_1, - .desc = "BP2", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data cpu9krea_button_data = { - .buttons = cpu9krea_buttons, - .nbuttons = ARRAY_SIZE(cpu9krea_buttons), -}; - -static struct platform_device cpu9krea_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &cpu9krea_button_data, - } -}; - -static void __init cpu9krea_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */ - at91_set_deglitch(AT91_PIN_PC3, 1); - at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */ - at91_set_deglitch(AT91_PIN_PB20, 1); - - platform_device_register(&cpu9krea_button_device); -} -#else -static void __init cpu9krea_add_device_buttons(void) -{ -} -#endif - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata cpu9krea_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - }, -}; - -static void __init cpu9krea_board_init(void) -{ - at91_register_devices(); - - /* NOR */ - cpu9krea_add_device_nor(); - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART3 on ttyS4. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, 0); - - /* USART4 on ttyS5. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&cpu9krea_usbh_data); - /* USB Device */ - at91_add_device_udc(&cpu9krea_udc_data); - /* NAND */ - cpu9krea_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&cpu9krea_macb_data); - /* MMC */ - at91_add_device_mci(0, &cpu9krea_mci0_data); - /* I2C */ - at91_add_device_i2c(cpu9krea_i2c_devices, - ARRAY_SIZE(cpu9krea_i2c_devices)); - /* LEDs */ - at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds)); - /* Push Buttons */ - cpu9krea_add_device_buttons(); -} - -#ifdef CONFIG_MACH_CPU9260 -MACHINE_START(CPUAT9260, "Eukrea CPU9260") -#else -MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") -#endif - /* Maintainer: Eric Benard - EUKREA Electromatique */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = cpu9krea_init_early, - .init_irq = at91_init_irq_default, - .init_machine = cpu9krea_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c deleted file mode 100644 index a6aa4a2432f2..000000000000 --- a/arch/arm/mach-at91/board-flexibity.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-flexibity.c - * - * Copyright (C) 2010-2011 Flexibity - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/input.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "generic.h" -#include "gpio.h" - -static void __init flexibity_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* USB Host port */ -static struct at91_usbh_data __initdata flexibity_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* USB Device port */ -static struct at91_udc_data __initdata flexibity_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* I2C devices */ -static struct i2c_board_info __initdata flexibity_i2c_devices[] = { - { - I2C_BOARD_INFO("ds1307", 0x68), - }, -}; - -/* SPI devices */ -static struct spi_board_info flexibity_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -}; - -/* MCI (SD/MMC) */ -static struct mci_platform_data __initdata flexibity_mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - }, -}; - -/* LEDs */ -static struct gpio_led flexibity_leds[] = { - { - .name = "usb1:green", - .gpio = AT91_PIN_PA12, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb1:red", - .gpio = AT91_PIN_PA13, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb2:green", - .gpio = AT91_PIN_PB26, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb2:red", - .gpio = AT91_PIN_PB27, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb3:green", - .gpio = AT91_PIN_PC8, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb3:red", - .gpio = AT91_PIN_PC6, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb4:green", - .gpio = AT91_PIN_PB4, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "usb4:red", - .gpio = AT91_PIN_PB5, - .active_low = 1, - .default_trigger = "default-on", - } -}; - -static void __init flexibity_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&flexibity_usbh_data); - /* USB Device */ - at91_add_device_udc(&flexibity_udc_data); - /* I2C */ - at91_add_device_i2c(flexibity_i2c_devices, - ARRAY_SIZE(flexibity_i2c_devices)); - /* SPI */ - at91_add_device_spi(flexibity_spi_devices, - ARRAY_SIZE(flexibity_spi_devices)); - /* MMC */ - at91_add_device_mci(0, &flexibity_mci0_data); - /* LEDs */ - at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); -} - -MACHINE_START(FLEXIBITY, "Flexibity Connect") - /* Maintainer: Maxim Osipov */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = flexibity_init_early, - .init_irq = at91_init_irq_default, - .init_machine = flexibity_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c deleted file mode 100644 index bf5cc55c7db6..000000000000 --- a/arch/arm/mach-at91/board-gsia18s.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * 2010 Igor Plyatov <plyatov@gmail.com> - * GeoSIG Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> -#include <linux/i2c.h> -#include <linux/i2c/pcf857x.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gsia18s.h" -#include "stamp9g20.h" -#include "gpio.h" - -static void __init gsia18s_init_early(void) -{ - stamp9g20_init_early(); -} - -/* - * Two USB Host ports - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata udc_data = { - .vbus_pin = AT91_PIN_PA22, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - -/* - * LEDs and GPOs - */ -static struct gpio_led gpio_leds[] = { - { - .name = "gpo:spi1reset", - .gpio = AT91_PIN_PC1, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:trig_net_out", - .gpio = AT91_PIN_PB20, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:trig_net_dir", - .gpio = AT91_PIN_PB19, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "gpo:charge_dis", - .gpio = AT91_PIN_PC2, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:event", - .gpio = AT91_PIN_PB17, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:lan", - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { - .name = "led:error", - .gpio = AT91_PIN_PB16, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &gpio_led_info, - } -}; - -static void __init gsia18s_leds_init(void) -{ - platform_device_register(&leds); -} - -/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */ -static struct gpio_led pcf_gpio_leds1[] = { - { /* bit 0 */ - .name = "gpo:hdc_power", - .gpio = PCF_GPIO_HDC_POWER, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 1 */ - .name = "gpo:wifi_setup", - .gpio = PCF_GPIO_WIFI_SETUP, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 2 */ - .name = "gpo:wifi_enable", - .gpio = PCF_GPIO_WIFI_ENABLE, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 3 */ - .name = "gpo:wifi_reset", - .gpio = PCF_GPIO_WIFI_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - /* bit 4 used as GPI */ - { /* bit 5 */ - .name = "gpo:gps_setup", - .gpio = PCF_GPIO_GPS_SETUP, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 6 */ - .name = "gpo:gps_standby", - .gpio = PCF_GPIO_GPS_STANDBY, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { /* bit 7 */ - .name = "gpo:gps_power", - .gpio = PCF_GPIO_GPS_POWER, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - } -}; - -static struct gpio_led_platform_data pcf_gpio_led_info1 = { - .leds = pcf_gpio_leds1, - .num_leds = ARRAY_SIZE(pcf_gpio_leds1), -}; - -static struct platform_device pcf_leds1 = { - .name = "leds-gpio", /* GS_IA18-CB_board */ - .id = 1, - .dev = { - .platform_data = &pcf_gpio_led_info1, - } -}; - -/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */ -static struct gpio_led pcf_gpio_leds2[] = { - { /* bit 0 */ - .name = "gpo:alarm_1", - .gpio = PCF_GPIO_ALARM1, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 1 */ - .name = "gpo:alarm_2", - .gpio = PCF_GPIO_ALARM2, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 2 */ - .name = "gpo:alarm_3", - .gpio = PCF_GPIO_ALARM3, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - { /* bit 3 */ - .name = "gpo:alarm_4", - .gpio = PCF_GPIO_ALARM4, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - /* bits 4, 5, 6 not used */ - { /* bit 7 */ - .name = "gpo:alarm_v_relay_on", - .gpio = PCF_GPIO_ALARM_V_RELAY_ON, - .active_low = 0, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, -}; - -static struct gpio_led_platform_data pcf_gpio_led_info2 = { - .leds = pcf_gpio_leds2, - .num_leds = ARRAY_SIZE(pcf_gpio_leds2), -}; - -static struct platform_device pcf_leds2 = { - .name = "leds-gpio", - .id = 2, - .dev = { - .platform_data = &pcf_gpio_led_info2, - } -}; - -/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */ -static struct gpio_led pcf_gpio_leds3[] = { - { /* bit 0 */ - .name = "gpo:modem_power", - .gpio = PCF_GPIO_MODEM_POWER, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_OFF, - }, - /* bits 1 and 2 not used */ - { /* bit 3 */ - .name = "gpo:modem_reset", - .gpio = PCF_GPIO_MODEM_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - /* bits 4, 5 and 6 not used */ - { /* bit 7 */ - .name = "gpo:trx_reset", - .gpio = PCF_GPIO_TRX_RESET, - .active_low = 1, - .default_trigger = "none", - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data pcf_gpio_led_info3 = { - .leds = pcf_gpio_leds3, - .num_leds = ARRAY_SIZE(pcf_gpio_leds3), -}; - -static struct platform_device pcf_leds3 = { - .name = "leds-gpio", - .id = 3, - .dev = { - .platform_data = &pcf_gpio_led_info3, - } -}; - -static void __init gsia18s_pcf_leds_init(void) -{ - platform_device_register(&pcf_leds1); - platform_device_register(&pcf_leds2); - platform_device_register(&pcf_leds3); -} - -/* - * SPI busses. - */ -static struct spi_board_info gsia18s_spi_devices[] = { - { /* User accessible spi0, cs0 used for communication with MSP RTC */ - .modalias = "spidev", - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 580000, - .mode = SPI_MODE_1, - }, - { /* User accessible spi1, cs0 used for communication with int. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs1 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs2 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - }, - { /* User accessible spi1, cs3 used for communication with ext. DSP */ - .modalias = "spidev", - .bus_num = 1, - .chip_select = 3, - .max_speed_hz = 5600000, - .mode = SPI_MODE_0, - } -}; - -/* - * GPI Buttons - */ -static struct gpio_keys_button buttons[] = { - { - .gpio = GPIO_TRIG_NET_IN, - .code = BTN_1, - .desc = "TRIG_NET_IN", - .type = EV_KEY, - .active_low = 0, - .wakeup = 1, - }, - { /* SW80 on the GS_IA18_S-MN board*/ - .gpio = GPIO_CARD_UNMOUNT_0, - .code = BTN_2, - .desc = "Card umount 0", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - }, - { /* SW79 on the GS_IA18_S-MN board*/ - .gpio = GPIO_CARD_UNMOUNT_1, - .code = BTN_3, - .desc = "Card umount 1", - .type = EV_KEY, - .active_low = 1, - .wakeup = 1, - }, - { /* SW280 on the GS_IA18-CB board*/ - .gpio = GPIO_KEY_POWER, - .code = KEY_POWER, - .desc = "Power Off Button", - .type = EV_KEY, - .active_low = 0, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data button_data = { - .buttons = buttons, - .nbuttons = ARRAY_SIZE(buttons), -}; - -static struct platform_device button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &button_data, - } -}; - -static void __init gsia18s_add_device_buttons(void) -{ - at91_set_gpio_input(GPIO_TRIG_NET_IN, 1); - at91_set_deglitch(GPIO_TRIG_NET_IN, 1); - at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1); - at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1); - at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1); - at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1); - at91_set_gpio_input(GPIO_KEY_POWER, 0); - at91_set_deglitch(GPIO_KEY_POWER, 1); - - platform_device_register(&button_device); -} - -/* - * I2C - */ -static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio, - unsigned int ngpio, void *context) -{ - int status; - - status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det"); - if (status < 0) { - pr_err("error: can't request GPIO%d\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT); - if (status < 0) { - pr_err("error: can't setup GPIO%d as input\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false); - if (status < 0) { - pr_err("error: can't export GPIO%d\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1); - if (status < 0) { - pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n", - gpio + PCF_GPIO_ETH_DETECT); - return status; - } - - return 0; -} - -static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio, - unsigned ngpio, void *context) -{ - gpio_free(gpio + PCF_GPIO_ETH_DETECT); - return 0; -} - -static struct pcf857x_platform_data pcf20_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE0, - .n_latch = (1 << 4), - .setup = pcf8574x_0x20_setup, - .teardown = pcf8574x_0x20_teardown, -}; - -static struct pcf857x_platform_data pcf22_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE1, -}; - -static struct pcf857x_platform_data pcf24_pdata = { - .gpio_base = GS_IA18_S_PCF_GPIO_BASE2, -}; - -static struct i2c_board_info __initdata gsia18s_i2c_devices[] = { - { /* U1 on the GS_IA18-CB_V3 board */ - I2C_BOARD_INFO("pcf8574", 0x20), - .platform_data = &pcf20_pdata, - }, - { /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */ - I2C_BOARD_INFO("pcf8574", 0x22), - .platform_data = &pcf22_pdata, - }, - { /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */ - I2C_BOARD_INFO("pcf8574", 0x24), - .platform_data = &pcf24_pdata, - }, - { /* U161 on the GS_IA18_S-MN board */ - I2C_BOARD_INFO("24c1024", 0x50), - }, - { /* U162 on the GS_IA18_S-MN board */ - I2C_BOARD_INFO("24c01", 0x53), - }, -}; - -/* - * Compact Flash - */ -static struct at91_cf_data __initdata gsia18s_cf1_data = { - .irq_pin = AT91_PIN_PA27, - .det_pin = AT91_PIN_PB30, - .vcc_pin = -EINVAL, - .rst_pin = AT91_PIN_PB31, - .chipselect = 5, - .flags = AT91_CF_TRUE_IDE, -}; - -/* Power Off by RTC */ -static void gsia18s_power_off(void) -{ - pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n"); - at91_set_gpio_output(AT91_PIN_PA25, 1); - /* Spin to death... */ - while (1) - ; -} - -static int __init gsia18s_power_off_init(void) -{ - pm_power_off = gsia18s_power_off; - return 0; -} - -/* ---------------------------------------------------------------------------*/ - -static void __init gsia18s_board_init(void) -{ - /* - * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). - * Used for Internal Analog Modem. - */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS | - ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - /* - * USART1 on ttyS2 (Rx, Tx, CTS, RTS). - * Used for GPS or WiFi or Data stream. - */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART2 on ttyS3 (Rx, Tx, CTS, RTS). - * Used for External Modem. - */ - at91_register_uart(AT91SAM9260_ID_US2, 3, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART3 on ttyS4 (Rx, Tx, RTS). - * Used for RS-485. - */ - at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS); - - /* - * USART4 on ttyS5 (Rx, Tx). - * Used for TRX433 Radio Module. - */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - stamp9g20_board_init(); - at91_add_device_usbh(&usbh_data); - at91_add_device_udc(&udc_data); - at91_add_device_eth(&macb_data); - gsia18s_leds_init(); - gsia18s_pcf_leds_init(); - gsia18s_add_device_buttons(); - at91_add_device_i2c(gsia18s_i2c_devices, - ARRAY_SIZE(gsia18s_i2c_devices)); - at91_add_device_cf(&gsia18s_cf1_data); - at91_add_device_spi(gsia18s_spi_devices, - ARRAY_SIZE(gsia18s_spi_devices)); - gsia18s_power_off_init(); -} - -MACHINE_START(GSIA18S, "GS_IA18_S") - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = gsia18s_init_early, - .init_irq = at91_init_irq_default, - .init_machine = gsia18s_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c deleted file mode 100644 index 9c26b94ce448..000000000000 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* - * copied and adjusted from board-stamp9g20.c - * by Peter Gsellmann <pgsellmann@portner-elektronik.at> - */ - -#include <linux/mm.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "stamp9g20.h" -#include "gpio.h" - - -static void __init pcontrol_g20_init_early(void) -{ - stamp9g20_init_early(); -} - -static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { - .ncs_read_setup = 16, - .nrd_setup = 18, - .ncs_write_setup = 16, - .nwe_setup = 18, - - .ncs_read_pulse = 63, - .nrd_pulse = 55, - .ncs_write_pulse = 63, - .nwe_pulse = 55, - - .read_cycle = 127, - .write_cycle = 127, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT - | AT91_SMC_DBW_8 | AT91_SMC_PS_4 - | AT91_SMC_TDFMODE, - .tdf_cycles = 3, -}, { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 8, - .nrd_pulse = 8, - .ncs_write_pulse = 5, - .nwe_pulse = 4, - - .read_cycle = 8, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT - | AT91_SMC_DBW_16 | AT91_SMC_PS_8 - | AT91_SMC_TDFMODE, - .tdf_cycles = 1, -} }; - -static void __init add_device_pcontrol(void) -{ - /* configure chip-select 4 (IO compatible to 8051 X4 ) */ - sam9_smc_configure(0, 4, &pcontrol_smc_config[0]); - /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */ - sam9_smc_configure(0, 7, &pcontrol_smc_config[1]); -} - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device port - */ -static struct at91_udc_data __initdata pcontrol_g20_udc_data = { - .vbus_pin = AT91_PIN_PA22, /* Detect +5V bus voltage */ - .pullup_pin = AT91_PIN_PA4, /* K-state, active low */ -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - - -/* - * I2C devices: eeprom and phy/switch - */ -static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = { -{ /* D7 address width=2, 8KiB */ - I2C_BOARD_INFO("24c64", 0x50) -}, { /* D8 address width=1, 1 byte has 32 bits! */ - I2C_BOARD_INFO("lan9303", 0x0a) -}, }; - - -/* - * LEDs - */ -static struct gpio_led pcontrol_g20_leds[] = { - { - .name = "LED1", /* red H5 */ - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", /* supervisor */ - }, { - .name = "LED2", /* yellow H7 */ - .gpio = AT91_PIN_PB19, - .active_low = 1, - .default_trigger = "mmc0", /* SD-card activity */ - }, { - .name = "LED3", /* green H2 */ - .gpio = AT91_PIN_PB20, - .active_low = 1, - .default_trigger = "heartbeat", /* blinky */ - }, { - .name = "LED4", /* red H3 */ - .gpio = AT91_PIN_PC6, - .active_low = 1, - .default_trigger = "none", /* connection lost */ - }, { - .name = "LED5", /* yellow H6 */ - .gpio = AT91_PIN_PC7, - .active_low = 1, - .default_trigger = "none", /* unsent data */ - }, { - .name = "LED6", /* green H1 */ - .gpio = AT91_PIN_PC9, - .active_low = 1, - .default_trigger = "none", /* snafu */ - } -}; - - -/* - * SPI devices - */ -static struct spi_board_info pcontrol_g20_spi_devices[] = { - { - .modalias = "spidev", /* HMI port X4 */ - .chip_select = 1, - .max_speed_hz = 50 * 1000 * 1000, - .bus_num = 0, - }, { - .modalias = "spidev", /* piggyback A2 */ - .chip_select = 0, - .max_speed_hz = 50 * 1000 * 1000, - .bus_num = 1, - }, -}; - - -static void __init pcontrol_g20_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ - at91_register_uart(AT91SAM9260_ID_US4, 3, 0); - stamp9g20_board_init(); - at91_add_device_usbh(&usbh_data); - at91_add_device_eth(&macb_data); - at91_add_device_i2c(pcontrol_g20_i2c_devices, - ARRAY_SIZE(pcontrol_g20_i2c_devices)); - add_device_pcontrol(); - at91_add_device_spi(pcontrol_g20_spi_devices, - ARRAY_SIZE(pcontrol_g20_spi_devices)); - at91_add_device_udc(&pcontrol_g20_udc_data); - at91_gpio_leds(pcontrol_g20_leds, - ARRAY_SIZE(pcontrol_g20_leds)); - /* piggyback A2 */ - at91_set_gpio_output(AT91_PIN_PB31, 1); -} - - -MACHINE_START(PCONTROL_G20, "PControl G20") - /* Maintainer: pgsellmann@portner-elektronik.at */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = pcontrol_g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = pcontrol_g20_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c deleted file mode 100644 index c2166e3a236c..000000000000 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9-l9260.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * Copyright (C) 2007 Olimex Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 0, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Bootloader Area", - .offset = 0, - .size = 10 * SZ_1M, - }, - { - .name = "User Area", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata ek_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC8, - .wp_pin = AT91_PIN_PC4, - }, -}; - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* D1 */ - .name = "led1", - .gpio = AT91_PIN_PA9, - .active_low = 1, - .default_trigger = "heartbeat", - }, - { /* D2 */ - .name = "led2", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "timer", - } -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* MMC */ - at91_add_device_mci(0, &ek_mci0_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") - /* Maintainer: Olimex */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c deleted file mode 100644 index bf8a946b4cd0..000000000000 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9260ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/clk.h> -#include <linux/platform_data/at24.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * Audio - */ -static struct at73c213_board_info at73c213_data = { - .ssc_id = 0, - .shortname = "AT91SAM9260-EK external DAC", -}; - -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -static void __init at73c213_set_clk(struct at73c213_board_info *info) -{ - struct clk *pck0; - struct clk *plla; - - pck0 = clk_get(NULL, "pck0"); - plla = clk_get(NULL, "plla"); - - /* AT73C213 MCK Clock */ - at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */ - - clk_set_parent(pck0, plla); - clk_put(plla); - - info->dac_clk = pck0; -} -#else -static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -#endif - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) - { /* AT73C213 DAC */ - .modalias = "at73c213", - .chip_select = 0, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 1, - .mode = SPI_MODE_1, - .platform_data = &at73c213_data, - }, -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata ek_mci0_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds5", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA9, - .default_trigger = "heartbeat", - } -}; - -/* - * I2C devices - */ -static struct at24_platform_data at24c512 = { - .byte_len = SZ_512K / 8, - .page_size = 128, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - .platform_data = &at24c512, - }, - /* more devices can be added using expansion connectors */ -}; - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA30, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA31, - .code = BTN_4, - .desc = "Button 4", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA30, 1); - at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ - at91_set_deglitch(AT91_PIN_PA31, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* MMC */ - at91_add_device_mci(0, &ek_mci0_data); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* SSC (to AT73C213) */ - at73c213_set_clk(&at73c213_data); - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - /* Push Buttons */ - ek_add_device_buttons(); -} - -MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c deleted file mode 100644 index e85ada820bfb..000000000000 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ /dev/null @@ -1,623 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9261ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2006 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/spi/at73c213.h> -#include <linux/clk.h> -#include <linux/dm9000.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * DM9000 ethernet device - */ -#if defined(CONFIG_DM9000) -static struct resource dm9000_resource[] = { - [0] = { - .start = AT91_CHIPSELECT_2, - .end = AT91_CHIPSELECT_2 + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = AT91_CHIPSELECT_2 + 0x44, - .end = AT91_CHIPSELECT_2 + 0xFF, - .flags = IORESOURCE_MEM - }, - [2] = { - .flags = IORESOURCE_IRQ - | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, -}; - -static struct platform_device dm9000_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resource), - .resource = dm9000_resource, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -/* - * SMC timings for the DM9000. - * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings. - */ -static struct sam9_smc_config __initdata dm9000_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 8, - .nrd_pulse = 4, - .ncs_write_pulse = 8, - .nwe_pulse = 4, - - .read_cycle = 16, - .write_cycle = 16, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16, - .tdf_cycles = 1, -}; - -static void __init ek_add_device_dm9000(void) -{ - struct resource *r = &dm9000_resource[2]; - - /* Configure chip-select 2 (DM9000) */ - sam9_smc_configure(0, 2, &dm9000_smc_config); - - /* Configure Reset signal as output */ - at91_set_gpio_output(AT91_PIN_PC10, 0); - - /* Configure Interrupt pin as input, no pull-up */ - at91_set_gpio_input(AT91_PIN_PC11, 0); - - r->start = r->end = gpio_to_irq(AT91_PIN_PC11); - platform_device_register(&dm9000_device); -} -#else -static void __init ek_add_device_dm9000(void) {} -#endif /* CONFIG_DM9000 */ - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PB29, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PC15, - .enable_pin = AT91_PIN_PC14, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - -/* - * SPI related devices - */ -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init ek_add_device_ts(void) -{ - at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */ - at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */ -} -#else -static void __init ek_add_device_ts(void) {} -#endif - -/* - * Audio - */ -static struct at73c213_board_info at73c213_data = { - .ssc_id = 1, - .shortname = "AT91SAM9261/9G10-EK external DAC", -}; - -#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) -static void __init at73c213_set_clk(struct at73c213_board_info *info) -{ - struct clk *pck2; - struct clk *plla; - - pck2 = clk_get(NULL, "pck2"); - plla = clk_get(NULL, "plla"); - - /* AT73C213 MCK Clock */ - at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */ - - clk_set_parent(pck2, plla); - clk_put(plla); - - info->dac_clk = pck2; -} -#else -static void __init at73c213_set_clk(struct at73c213_board_info *info) {} -#endif - -/* - * SPI devices - */ -static struct spi_board_info ek_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 2, - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, - .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ - }, -#endif -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) - { /* AT73C213 DAC */ - .modalias = "at73c213", - .chip_select = 3, - .max_speed_hz = 10 * 1000 * 1000, - .bus_num = 0, - .mode = SPI_MODE_1, - .platform_data = &at73c213_data, - .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */ - }, -#endif -}; - -#else /* CONFIG_SPI_ATMEL_* */ -/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */ - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -EINVAL, - .wp_pin = -EINVAL, - }, -}; - -#endif /* CONFIG_SPI_ATMEL_* */ - - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) - -#if defined(CONFIG_FB_ATMEL_STN) - -/* STN */ -static struct fb_videomode at91_stn_modes[] = { - { - .name = "SP06Q002 @ 75", - .refresh = 75, - .xres = 320, .yres = 240, - .pixclock = KHZ2PICOS(1440), - - .left_margin = 1, .right_margin = 1, - .upper_margin = 0, .lower_margin = 0, - .hsync_len = 1, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_stn_monspecs = { - .manufacturer = "HIT", - .monitor = "SP06Q002", - - .modedb = at91_stn_modes, - .modedb_len = ARRAY_SIZE(at91_stn_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_STNMONO \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ - | ATMEL_LCDC_IFWIDTH_4 \ - | ATMEL_LCDC_SCANMOD_SINGLE) - -static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - /* backlight */ - if (on) { /* power up */ - at91_set_gpio_value(AT91_PIN_PC14, 0); - at91_set_gpio_value(AT91_PIN_PC15, 0); - } else { /* power down */ - at91_set_gpio_value(AT91_PIN_PC14, 1); - at91_set_gpio_value(AT91_PIN_PC15, 1); - } -} - -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .default_bpp = 1, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, - .default_monspecs = &at91fb_default_stn_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, - .guard_time = 1, -}; - -#else - -/* TFT */ -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_tft_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D50VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - if (on) - at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ - else - at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ -} - -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, - .default_monspecs = &at91fb_default_tft_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, - .guard_time = 1, -}; -#endif - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA27, - .code = BTN_0, - .desc = "Button 0", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA26, - .code = BTN_1, - .desc = "Button 1", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA25, - .code = BTN_2, - .desc = "Button 2", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA24, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */ - at91_set_deglitch(AT91_PIN_PA27, 1); - at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */ - at91_set_deglitch(AT91_PIN_PA26, 1); - at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */ - at91_set_deglitch(AT91_PIN_PA25, 1); - at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA24, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds7", - .gpio = AT91_PIN_PA14, - .active_low = 1, - .default_trigger = "none", - }, - { /* "top" led, green, userled2 to be defined */ - .name = "ds8", - .gpio = AT91_PIN_PA13, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA23, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - - if (cpu_is_at91sam9g10()) - ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB; - - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NAND */ - ek_add_device_nand(); - /* DM9000 ethernet */ - ek_add_device_dm9000(); - - /* spi0 and mmc/sd share the same PIO pins */ -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Touchscreen */ - ek_add_device_ts(); - /* SSC (to AT73C213) */ - at73c213_set_clk(&at73c213_data); - at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); -#else - /* MMC */ - at91_add_device_mci(0, &mci0_data); -#endif - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c deleted file mode 100644 index d76680f2a209..000000000000 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ /dev/null @@ -1,493 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-sam9263ek.c - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2007 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/platform_data/at24.h> -#include <linux/fb.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/leds.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> - -#include <video/atmel_lcdc.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 16.367 MHz crystal */ - at91_initialize(16367660); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 }, - .vbus_pin_active_low = {1, 1}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PA25, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * ADS7846 Touchscreen - */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ -} - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, - .x_plate_ohms = 450, - .y_plate_ohms = 250, - .pressure_max = 15000, - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; - -static void __init ek_add_device_ts(void) -{ - at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ - at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */ -} -#else -static void __init ek_add_device_ts(void) {} -#endif - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .chip_select = 3, - .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, - }, -#endif -}; - - -/* - * MCI (SD/MMC) - */ -static struct mci_platform_data __initdata mci1_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - }, -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PE31, - .is_rmii = 1, -}; - - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_64M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .det_pin = -EINVAL, - .rdy_pin = AT91_PIN_PA22, - .enable_pin = AT91_PIN_PD15, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 1, - .ncs_write_setup = 0, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 2, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * I2C devices - */ -static struct at24_platform_data at24c512 = { - .byte_len = SZ_512K / 8, - .page_size = 128, - .flags = AT24_FLAG_ADDR16, -}; - - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - .platform_data = &at24c512, - }, - /* more devices can be added using expansion connectors */ -}; - -/* - * LCD Controller - */ -#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static struct fb_videomode at91_tft_vga_modes[] = { - { - .name = "TX09D50VM1CCA @ 60", - .refresh = 60, - .xres = 240, .yres = 320, - .pixclock = KHZ2PICOS(4965), - - .left_margin = 1, .right_margin = 33, - .upper_margin = 1, .lower_margin = 0, - .hsync_len = 5, .vsync_len = 1, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, -}; - -static struct fb_monspecs at91fb_default_monspecs = { - .manufacturer = "HIT", - .monitor = "TX09D70VM1CCA", - - .modedb = at91_tft_vga_modes, - .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), - .hfmin = 15000, - .hfmax = 64000, - .vfmin = 50, - .vfmax = 150, -}; - -#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ - | ATMEL_LCDC_DISTYPE_TFT \ - | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) - -static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on) -{ - at91_set_gpio_value(AT91_PIN_PA30, on); -} - -/* Driver datas */ -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = { - .lcdcon_is_backlight = true, - .default_bpp = 16, - .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, - .guard_time = 1, -}; - -#else -static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; -#endif - - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { /* BP1, "leftclic" */ - .code = BTN_LEFT, - .gpio = AT91_PIN_PC5, - .active_low = 1, - .desc = "left_click", - .wakeup = 1, - }, - { /* BP2, "rightclic" */ - .code = BTN_RIGHT, - .gpio = AT91_PIN_PC4, - .active_low = 1, - .desc = "right_click", - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */ - at91_set_deglitch(AT91_PIN_PC5, 1); - at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */ - at91_set_deglitch(AT91_PIN_PC4, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - - -/* - * AC97 - * reset_pin is not connected: NRST - */ -static struct ac97c_platform_data ek_ac97_data = { - .reset_pin = -EINVAL, -}; - - -/* - * LEDs ... these could all be PWM-driven, for variable brightness - */ -static struct gpio_led ek_leds[] = { - { /* "right" led, green, userled2 (could be driven by pwm2) */ - .name = "ds2", - .gpio = AT91_PIN_PC29, - .active_low = 1, - .default_trigger = "nand-disk", - }, - { /* "power" led, yellow (could be driven by pwm0) */ - .name = "ds3", - .gpio = AT91_PIN_PB7, - .default_trigger = "heartbeat", - }, -#if !IS_ENABLED(CONFIG_LEDS_PWM) - { - .name = "ds1", - .gpio = AT91_PIN_PB8, - .active_low = 1, - .default_trigger = "none", - } -#endif -}; - -/* - * PWM Leds - */ -static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1", - 5000, PWM_POLARITY_INVERSED), -}; - -#if IS_ENABLED(CONFIG_LEDS_PWM) -static struct led_pwm pwm_leds[] = { - { - .name = "ds1", - .max_brightness = 255, - }, -}; - -static struct led_pwm_platform_data pwm_data = { - .num_leds = ARRAY_SIZE(pwm_leds), - .leds = pwm_leds, -}; - -static struct platform_device leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_data, - }, -}; -#endif - - -/* - * CAN - */ -static void sam9263ek_transceiver_switch(int on) -{ - if (on) { - at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */ - at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */ - } else { - at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */ - at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */ - } -} - -static struct at91_can_data ek_can_data = { - .transceiver_switch = sam9263ek_transceiver_switch, -}; - -static struct platform_device *devices[] __initdata = { -#if IS_ENABLED(CONFIG_LEDS_PWM) - &leds_pwm, -#endif -}; - -static void __init ek_board_init(void) -{ - at91_register_devices(); - - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* Touchscreen */ - ek_add_device_ts(); - /* MMC */ - at91_add_device_mci(1, &mci1_data); - /* Ethernet */ - at91_add_device_eth(&ek_macb_data); - /* NAND */ - ek_add_device_nand(); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* LCD Controller */ - at91_add_device_lcdc(&ek_lcdc_data); - /* Push Buttons */ - ek_add_device_buttons(); - /* AC97 */ - at91_add_device_ac97(&ek_ac97_data); - /* LEDs */ - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); -#if IS_ENABLED(CONFIG_LEDS_PWM) - at91_add_device_pwm(1 << AT91_PWM1); -#endif - /* CAN */ - at91_add_device_can(&ek_can_data); - /* Other platform devices */ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c deleted file mode 100644 index 49f075213451..000000000000 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ /dev/null @@ -1,429 +0,0 @@ -/* - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/at73c213.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/clk.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/consumer.h> - -#include <linux/platform_data/at91_adc.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/at91sam9_smc.h> -#include <mach/system_rev.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -/* - * board revision encoding - * bit 0: - * 0 => 1 sd/mmc slot - * 1 => 2 sd/mmc slots connectors (board from revision C) - */ -#define HAVE_2MMC (1 << 0) -static int inline ek_have_2mmc(void) -{ - return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC); -} - - -static void __init ek_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata ek_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -/* - * USB Device port - */ -static struct at91_udc_data __initdata ek_udc_data = { - .vbus_pin = AT91_PIN_PC5, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * SPI devices. - */ -static struct spi_board_info ek_spi_devices[] = { -#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 1, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -#endif -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PA7, - .is_rmii = 1, -}; - -static void __init ek_add_device_macb(void) -{ - if (ek_have_2mmc()) - ek_macb_data.phy_irq_pin = AT91_PIN_PB0; - - at91_add_device_eth(&ek_macb_data); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata ek_nand_partition[] = { - { - .name = "Bootstrap", - .offset = 0, - .size = 4 * SZ_1M, - }, - { - .name = "Partition 1", - .offset = MTDPART_OFS_NXTBLK, - .size = 60 * SZ_1M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - }, -}; - -/* det_pin is not connected */ -static struct atmel_nand_data __initdata ek_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, - .on_flash_bbt = 1, - .parts = ek_nand_partition, - .num_parts = ARRAY_SIZE(ek_nand_partition), -}; - -static struct sam9_smc_config __initdata ek_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 3, -}; - -static void __init ek_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = board_have_nand_16bit(); - /* setup bus-width (8 or 16) */ - if (ek_nand_data.bus_width_16) - ek_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - ek_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &ek_nand_smc_config); - - at91_add_device_nand(&ek_nand_data); -} - - -/* - * MCI (SD/MMC) - * wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata ek_mmc_data = { - .slot[1] = { - .bus_width = 4, - .detect_pin = AT91_PIN_PC9, - .wp_pin = -EINVAL, - }, - -}; - -static void __init ek_add_device_mmc(void) -{ - if (ek_have_2mmc()) { - ek_mmc_data.slot[0].bus_width = 4; - ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; - ek_mmc_data.slot[0].wp_pin = -1; - } - at91_add_device_mci(0, &ek_mmc_data); -} - -/* - * LEDs - */ -static struct gpio_led ek_leds[] = { - { /* "bottom" led, green, userled1 to be defined */ - .name = "ds5", - .gpio = AT91_PIN_PA6, - .active_low = 1, - .default_trigger = "none", - }, - { /* "power" led, yellow */ - .name = "ds1", - .gpio = AT91_PIN_PA9, - .default_trigger = "heartbeat", - } -}; - -static void __init ek_add_device_gpio_leds(void) -{ - if (ek_have_2mmc()) { - ek_leds[0].gpio = AT91_PIN_PB8; - ek_leds[1].gpio = AT91_PIN_PB9; - } - - at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); -} - -/* - * GPIO Buttons - */ -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button ek_buttons[] = { - { - .gpio = AT91_PIN_PA30, - .code = BTN_3, - .desc = "Button 3", - .active_low = 1, - .wakeup = 1, - }, - { - .gpio = AT91_PIN_PA31, - .code = BTN_4, - .desc = "Button 4", - .active_low = 1, - .wakeup = 1, - } -}; - -static struct gpio_keys_platform_data ek_button_data = { - .buttons = ek_buttons, - .nbuttons = ARRAY_SIZE(ek_buttons), -}; - -static struct platform_device ek_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_button_data, - } -}; - -static void __init ek_add_device_buttons(void) -{ - at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */ - at91_set_deglitch(AT91_PIN_PA30, 1); - at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */ - at91_set_deglitch(AT91_PIN_PA31, 1); - - platform_device_register(&ek_button_device); -} -#else -static void __init ek_add_device_buttons(void) {} -#endif - -/* - * ADCs - */ - -static struct at91_adc_data ek_adc_data = { - .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3), - .use_external_triggers = true, - .vref = 3300, -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("AVDD", "0-001b"), - REGULATOR_SUPPLY("HPVDD", "0-001b"), - REGULATOR_SUPPLY("DBVDD", "0-001b"), - REGULATOR_SUPPLY("DCVDD", "0-001b"), -}; - -static struct regulator_init_data ek_avdd_reg_init_data = { - .constraints = { - .name = "3V3", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .consumer_supplies = ek_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), -}; - -static struct fixed_voltage_config ek_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 0, - .init_data = &ek_avdd_reg_init_data, -}; -static struct platform_device ek_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &ek_vdd_pdata, - }, -}; -static void __init ek_add_regulators(void) -{ - platform_device_register(&ek_voltage_regulator); -} -#else -static void __init ek_add_regulators(void) {} -#endif - - -static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50) - }, - { - I2C_BOARD_INFO("wm8731", 0x1b) - }, -}; - -static struct platform_device sam9g20ek_audio_device = { - .name = "at91sam9g20ek-audio", - .id = -1, -}; - -static void __init ek_add_device_audio(void) -{ - platform_device_register(&sam9g20ek_audio_device); -} - - -static void __init ek_board_init(void) -{ - /* Serial */ - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&ek_usbh_data); - /* USB Device */ - at91_add_device_udc(&ek_udc_data); - /* SPI */ - at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); - /* NAND */ - ek_add_device_nand(); - /* Ethernet */ - ek_add_device_macb(); - /* Regulators */ - ek_add_regulators(); - /* MMC */ - ek_add_device_mmc(); - /* I2C */ - at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); - /* LEDs */ - ek_add_device_gpio_leds(); - /* Push Buttons */ - ek_add_device_buttons(); - /* ADCs */ - at91_add_device_adc(&ek_adc_data); - /* PCK0 provides MCLK to the WM8731 */ - at91_set_B_periph(AT91_PIN_PC1, 0); - /* SSC (for WM8731) */ - at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); - ek_add_device_audio(); -} - -MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END - -MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") - /* Maintainer: Atmel */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = ek_init_early, - .init_irq = at91_init_irq_default, - .init_machine = ek_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c deleted file mode 100644 index b4aff840a1a0..000000000000 --- a/arch/arm/mach-at91/board-snapper9260.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-snapper9260.c - * - * Copyright (C) 2010 Bluewater System Ltd - * - * Author: Andre Renaud <andre@bluewatersys.com> - * Author: Ryan Mallon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/platform_data/pca953x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/hardware.h> -#include <mach/at91sam9_smc.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - -#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) - -static void __init snapper9260_init_early(void) -{ - at91_initialize(18432000); -} - -static struct at91_usbh_data __initdata snapper9260_usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - -static struct at91_udc_data __initdata snapper9260_udc_data = { - .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), - .vbus_active_low = 1, - .vbus_polled = 1, - .pullup_pin = -EINVAL, -}; - -static struct macb_platform_data snapper9260_macb_data = { - .phy_irq_pin = -EINVAL, - .is_rmii = 1, -}; - -static struct mtd_partition __initdata snapper9260_nand_partitions[] = { - { - .name = "Preboot", - .offset = 0, - .size = SZ_128K, - }, - { - .name = "Bootloader", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4M, - }, - { - .name = "Filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct atmel_nand_data __initdata snapper9260_nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .parts = snapper9260_nand_partitions, - .num_parts = ARRAY_SIZE(snapper9260_nand_partitions), - .bus_width_16 = 0, - .enable_pin = -EINVAL, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 0, - .nwe_setup = 0, - - .ncs_read_pulse = 5, - .nrd_pulse = 2, - .ncs_write_pulse = 5, - .nwe_pulse = 2, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE), - .tdf_cycles = 1, -}; - -static struct pca953x_platform_data snapper9260_io_expander_data = { - .gpio_base = SNAPPER9260_IO_EXP_GPIO(0), -}; - -static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { - { - /* IO expander */ - I2C_BOARD_INFO("max7312", 0x28), - .platform_data = &snapper9260_io_expander_data, - }, - { - /* Audio codec */ - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = { - /* RTC */ - I2C_BOARD_INFO("isl1208", 0x6f), -}; - -static void __init snapper9260_add_device_nand(void) -{ - at91_set_A_periph(AT91_PIN_PC14, 0); - sam9_smc_configure(0, 3, &snapper9260_nand_smc_config); - at91_add_device_nand(&snapper9260_nand_data); -} - -static void __init snapper9260_board_init(void) -{ - at91_register_devices(); - - at91_add_device_i2c(snapper9260_i2c_devices, - ARRAY_SIZE(snapper9260_i2c_devices)); - - snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); - i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); - - /* Debug on ttyS0 */ - at91_register_uart(0, 0, 0); - - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); - at91_add_device_serial(); - at91_add_device_usbh(&snapper9260_usbh_data); - at91_add_device_udc(&snapper9260_udc_data); - at91_add_device_eth(&snapper9260_macb_data); - at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | - ATMEL_SSC_TD | ATMEL_SSC_RD)); - snapper9260_add_device_nand(); -} - -MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = snapper9260_init_early, - .init_irq = at91_init_irq_default, - .init_machine = snapper9260_board_init, -MACHINE_END - - diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c deleted file mode 100644 index e825641a1dee..000000000000 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de> - * taskit GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/mm.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/w1-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/at91sam9_smc.h> -#include <mach/hardware.h> - -#include "at91_aic.h" -#include "board.h" -#include "sam9_smc.h" -#include "generic.h" -#include "gpio.h" - - -void __init stamp9g20_init_early(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91_initialize(18432000); -} - -/* - * NAND flash - */ -static struct atmel_nand_data __initdata nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, - .bus_width_16 = 0, - .det_pin = -EINVAL, - .ecc_mode = NAND_ECC_SOFT, -}; - -static struct sam9_smc_config __initdata nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - -static void __init add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(0, 3, &nand_smc_config); - - at91_add_device_nand(&nand_data); -} - - -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -static struct mci_platform_data __initdata mmc_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -1, - .wp_pin = -1, - }, -}; - - -/* - * USB Host port - */ -static struct at91_usbh_data __initdata usbh_data = { - .ports = 2, - .vbus_pin = {-EINVAL, -EINVAL}, - .overcurrent_pin= {-EINVAL, -EINVAL}, -}; - - -/* - * USB Device port - */ -static struct at91_udc_data __initdata portuxg20_udc_data = { - .vbus_pin = AT91_PIN_PC7, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - -static struct at91_udc_data __initdata stamp9g20evb_udc_data = { - .vbus_pin = AT91_PIN_PA22, - .pullup_pin = -EINVAL, /* pull-up driven by UDC */ -}; - - -/* - * MACB Ethernet device - */ -static struct macb_platform_data __initdata macb_data = { - .phy_irq_pin = AT91_PIN_PA28, - .is_rmii = 1, -}; - - -/* - * LEDs - */ -static struct gpio_led portuxg20_leds[] = { - { - .name = "LED2", - .gpio = AT91_PIN_PC5, - .default_trigger = "none", - }, { - .name = "LED3", - .gpio = AT91_PIN_PC4, - .default_trigger = "none", - }, { - .name = "LED4", - .gpio = AT91_PIN_PC10, - .default_trigger = "heartbeat", - } -}; - -static struct gpio_led stamp9g20evb_leds[] = { - { - .name = "D8", - .gpio = AT91_PIN_PB18, - .active_low = 1, - .default_trigger = "none", - }, { - .name = "D9", - .gpio = AT91_PIN_PB19, - .active_low = 1, - .default_trigger = "none", - }, { - .name = "D10", - .gpio = AT91_PIN_PB20, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - - -/* - * SPI devices - */ -static struct spi_board_info portuxg20_spi_devices[] = { - { - .modalias = "spidev", - .chip_select = 0, - .max_speed_hz = 1 * 1000 * 1000, - .bus_num = 0, - }, { - .modalias = "spidev", - .chip_select = 0, - .max_speed_hz = 1 * 1000 * 1000, - .bus_num = 1, - }, -}; - - -/* - * Dallas 1-Wire - */ -static struct w1_gpio_platform_data w1_gpio_pdata = { - .pin = AT91_PIN_PA29, - .is_open_drain = 1, - .ext_pullup_enable_pin = -EINVAL, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -void add_w1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - - -void __init stamp9g20_board_init(void) -{ - /* Serial */ - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - at91_add_device_serial(); - /* NAND */ - add_device_nand(); - /* MMC */ - at91_add_device_mci(0, &mmc_data); - /* W1 */ - add_w1(); -} - -static void __init portuxg20_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - stamp9g20_board_init(); - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* USB Device */ - at91_add_device_udc(&portuxg20_udc_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* SPI */ - at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); - /* LEDs */ - at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); -} - -static void __init stamp9g20evb_board_init(void) -{ - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - stamp9g20_board_init(); - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* USB Device */ - at91_add_device_udc(&stamp9g20evb_udc_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* LEDs */ - at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds)); -} - -MACHINE_START(PORTUXG20, "taskit PortuxG20") - /* Maintainer: taskit GmbH */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = stamp9g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = portuxg20_board_init, -MACHINE_END - -MACHINE_START(STAMP9G20, "taskit Stamp9G20") - /* Maintainer: taskit GmbH */ - .init_time = at91_init_time, - .map_io = at91_map_io, - .handle_irq = at91_aic_handle_irq, - .init_early = stamp9g20_init_early, - .init_irq = at91_init_irq_default, - .init_machine = stamp9g20evb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/stamp9g20.h b/arch/arm/mach-at91/stamp9g20.h deleted file mode 100644 index f62c0abca4b4..000000000000 --- a/arch/arm/mach-at91/stamp9g20.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_STAMP9G20_H -#define __MACH_STAMP9G20_H - -void stamp9g20_init_early(void); -void stamp9g20_board_init(void); - -#endif |