summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-highbank
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 16:49:45 +0900
commitaac59e3efce3dca787b11e34726001603ce3d161 (patch)
tree855d3f967b102877a179e23382be3c2c7fc8d66c /arch/arm/mach-highbank
parent21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff)
parent005ff5fb077ebf93882bd643932f932a9b402529 (diff)
downloadlinux-aac59e3efce3dca787b11e34726001603ce3d161.tar.gz
linux-aac59e3efce3dca787b11e34726001603ce3d161.tar.bz2
linux-aac59e3efce3dca787b11e34726001603ce3d161.zip
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
Diffstat (limited to 'arch/arm/mach-highbank')
-rw-r--r--arch/arm/mach-highbank/Kconfig1
-rw-r--r--arch/arm/mach-highbank/Makefile2
-rw-r--r--arch/arm/mach-highbank/core.h4
-rw-r--r--arch/arm/mach-highbank/highbank.c24
-rw-r--r--arch/arm/mach-highbank/hotplug.c37
-rw-r--r--arch/arm/mach-highbank/platsmp.c68
-rw-r--r--arch/arm/mach-highbank/pm.c27
7 files changed, 19 insertions, 144 deletions
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 616408d76be5..fe98df44579c 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -10,6 +10,7 @@ config ARCH_HIGHBANK
select ARM_ERRATA_775420
select ARM_ERRATA_798181
select ARM_GIC
+ select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
select COMMON_CLK
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
index 8a1ef576d79f..55840f414d3e 100644
--- a/arch/arm/mach-highbank/Makefile
+++ b/arch/arm/mach-highbank/Makefile
@@ -3,6 +3,4 @@ obj-y := highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
-obj-$(CONFIG_SMP) += platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index aea1ec5ab6f8..7ec5edcd1336 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -3,7 +3,6 @@
#include <linux/reboot.h>
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_restart(enum reboot_mode, const char *);
extern void __iomem *scu_base_addr;
@@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {}
#endif
extern void highbank_smc1(int fn, int arg);
-extern void highbank_cpu_die(unsigned int cpu);
-
-extern struct smp_operations highbank_smp_ops;
#endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index e6d6eacea9d0..b3d7e5634b83 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -24,10 +24,9 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
+#include <asm/psci.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -48,17 +47,6 @@ static void __init highbank_scu_map_io(void)
scu_base_addr = ioremap(base, SZ_4K);
}
-#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
-
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
- cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
- writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
- __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
- outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
- HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
static void highbank_l2x0_disable(void)
{
@@ -138,6 +126,10 @@ static struct notifier_block highbank_platform_nb = {
.notifier_call = highbank_platform_notifier,
};
+static struct platform_device highbank_cpuidle_device = {
+ .name = "cpuidle-calxeda",
+};
+
static void __init highbank_init(void)
{
struct device_node *np;
@@ -154,6 +146,9 @@ static void __init highbank_init(void)
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ if (psci_ops.cpu_suspend)
+ platform_device_register(&highbank_cpuidle_device);
}
static const char *highbank_match[] __initconst = {
@@ -166,7 +161,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
.dma_zone_size = (4ULL * SZ_1G),
#endif
- .smp = smp_ops(highbank_smp_ops),
.init_irq = highbank_init_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
deleted file mode 100644
index a019e4e86e51..000000000000
--- a/arch/arm/mach-highbank/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/kernel.h>
-#include <asm/cacheflush.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-extern void secondary_startup(void);
-
-/*
- * platform-specific code to shutdown a CPU
- *
- */
-void __ref highbank_cpu_die(unsigned int cpu)
-{
- highbank_set_cpu_jump(cpu, phys_to_virt(0));
-
- flush_cache_louis();
- highbank_set_core_pwr();
-
- while (1)
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
deleted file mode 100644
index 32d75cf55cbc..000000000000
--- a/arch/arm/mach-highbank/platsmp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- highbank_set_cpu_jump(cpu, secondary_startup);
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
- return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init highbank_smp_init_cpus(void)
-{
- unsigned int i, ncores = 4;
-
- /* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "highbank: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
-{
- if (scu_base_addr)
- scu_enable(scu_base_addr);
-}
-
-struct smp_operations highbank_smp_ops __initdata = {
- .smp_init_cpus = highbank_smp_init_cpus,
- .smp_prepare_cpus = highbank_smp_prepare_cpus,
- .smp_boot_secondary = highbank_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = highbank_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 04eddb4f4380..7f2bd85eb935 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -16,27 +16,19 @@
#include <linux/cpu_pm.h>
#include <linux/init.h>
-#include <linux/io.h>
#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
#include <asm/suspend.h>
-
-#include "core.h"
-#include "sysregs.h"
+#include <asm/psci.h>
static int highbank_suspend_finish(unsigned long val)
{
- outer_flush_all();
- outer_disable();
-
- highbank_set_pwr_suspend();
-
- cpu_do_idle();
+ const struct psci_power_state ps = {
+ .type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+ .affinity_level = 1,
+ };
- highbank_clear_pwr_request();
- return 0;
+ return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
}
static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state)
cpu_pm_enter();
cpu_cluster_pm_enter();
- highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
- highbank_smc1(0x102, 0x1);
- if (scu_base_addr)
- scu_enable(scu_base_addr);
return 0;
}
@@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
void __init highbank_pm_init(void)
{
+ if (!psci_ops.cpu_suspend)
+ return;
+
suspend_set_ops(&highbank_pm_ops);
}