ARM: S3C24XX: Drop s3c2410 specific s3c2410_gpio_cfgpin()

The s3c_gpio_cfgpin() call should be functionally equivalent, so replace
the s3c2410_gpio_cfgpin() calls in the s3c24xx code with s3c_gpio_cfgpin
to allow moving away from a fixed GPIO number to register address mapping

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

5 files changed, 12 insertions, 8 deletions

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 171a7c38428a..8cdeb14af592 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -69,13 +69,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 	}
 
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
 	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
 	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 7047317ed7f4..b42a76042af5 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -56,6 +56,7 @@
 #include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
@@ -225,7 +226,7 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index d03cbe2acde6..b061ddcf3067 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -61,6 +61,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/gpio-cfg.h>
 #include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
@@ -222,7 +223,7 @@ static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 5527f746c5e3..e2f7e64a526b 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -50,6 +50,7 @@
 #include <plat/udc.h>
 #include <plat/iic.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -209,7 +210,7 @@ static int h1940_backlight_init(struct device *dev)
 
 	gpio_direction_output(S3C2410_GPB(0), 0);
 	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index e9762fb30d38..d0e87b6e2e0f 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -58,6 +58,7 @@
 #include <plat/iic.h>
 
 #include <plat/common-smdk.h>
+#include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -347,7 +348,7 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);