Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...

5 files changed, 89 insertions, 11 deletions

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index a8fa4f7e1f60..43c1ac696274 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -7,6 +7,10 @@ extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_size;
+extern void shmobile_boot_vector_gen2(void);
+extern unsigned long shmobile_boot_fn_gen2;
+extern unsigned long shmobile_boot_cpu_gen2;
+extern unsigned long shmobile_boot_size_gen2;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 32e0bf6e3ccb..cef8e8c555f8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,11 @@
 #include <asm/assembler.h>
 #include <asm/memory.h>
 
+#define SCTLR_MMU	0x01
+#define BOOTROM_ADDRESS	0xE6340000
+#define RWTCSRA_ADDRESS 0xE6020004
+#define RWTCSRA_WOVF	0x10
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -37,6 +42,56 @@ shmobile_boot_fn:
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
 
+#ifdef CONFIG_ARCH_RCAR_GEN2
+/*
+ * Reset vector for R-Car Gen2 and RZ/G1 secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ */
+ENTRY(shmobile_boot_vector_gen2)
+	mrc	p15, 0, r0, c0, c0, 5		@ r0 = MPIDR
+	ldr	r1, shmobile_boot_cpu_gen2
+	cmp	r0, r1
+	bne	shmobile_smp_continue_gen2
+
+	mrc	p15, 0, r1, c1, c0, 0		@ r1 = SCTLR
+	and	r0, r1, #SCTLR_MMU
+	cmp	r0, #SCTLR_MMU
+	beq	shmobile_smp_continue_gen2
+
+	ldr	r0, rwtcsra
+	mov	r1, #0
+	ldrb	r1, [r0]
+	and	r0, r1, #RWTCSRA_WOVF
+	cmp	r0, #RWTCSRA_WOVF
+	bne	shmobile_smp_continue_gen2
+
+	ldr	r0, bootrom
+	bx	r0
+
+shmobile_smp_continue_gen2:
+	ldr     r1, shmobile_boot_fn_gen2
+	bx	r1
+
+ENDPROC(shmobile_boot_vector_gen2)
+
+	.align	4
+rwtcsra:
+	.word	RWTCSRA_ADDRESS
+bootrom:
+	.word	BOOTROM_ADDRESS
+	.globl	shmobile_boot_cpu_gen2
+shmobile_boot_cpu_gen2:
+	.word	0x00000000
+
+	.align	2
+	.globl	shmobile_boot_fn_gen2
+shmobile_boot_fn_gen2:
+	.space	4
+	.globl	shmobile_boot_size_gen2
+shmobile_boot_size_gen2:
+	.long	. - shmobile_boot_vector_gen2
+#endif /* CONFIG_ARCH_RCAR_GEN2 */
+
 /*
  * Per-CPU SMP boot function/argument selection code based on MPIDR
  */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4422b615a6ee..ba732effc90b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -191,6 +191,7 @@ static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = __pa_symbol(shmobile_smp_boot);
+	shmobile_boot_fn_gen2 = shmobile_boot_fn;
 }
 
 void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index e5f215c8b218..5a798b406af0 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -17,6 +17,7 @@
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
+#include <asm/cputype.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -37,7 +38,6 @@
 #define CA7RESCNT_CODE	0x5a5a0000
 #define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
 
-
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
@@ -119,8 +119,17 @@ map:
 	p = ioremap(res.start, resource_size(&res));
 	if (!p)
 		return;
-
-	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	/*
+	 * install the reset vector, use the largest version if we have enough
+	 * memory available
+	 */
+	if (resource_size(&res) >= shmobile_boot_size_gen2) {
+		shmobile_boot_cpu_gen2 = read_cpuid_mpidr();
+		memcpy_toio(p, shmobile_boot_vector_gen2,
+			    shmobile_boot_size_gen2);
+	} else {
+		memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	}
 	iounmap(p);
 
 	/* setup reset vectors */
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..93f628acfd94 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
 /*
  * R-Car Generation 2 da9063/da9210 regulator quirk
  *
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators.  Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * Certain Gen2 development boards have an da9063 and one or more da9210
+ * regulators. All of these regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
  *
  * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
  * to assert their interrupt request lines.  Hence as soon as one driver
@@ -50,7 +50,7 @@ static void __iomem *irqc;
 static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
 static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
 
-static struct i2c_msg da9xxx_msgs[2] = {
+static struct i2c_msg da9xxx_msgs[3] = {
 	{
 		.addr = 0x58,
 		.len = ARRAY_SIZE(da9063_irq_clr),
@@ -59,6 +59,10 @@ static struct i2c_msg da9xxx_msgs[2] = {
 		.addr = 0x68,
 		.len = ARRAY_SIZE(da9210_irq_clr),
 		.buf = da9210_irq_clr,
+	}, {
+		.addr = 0x70,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
 	},
 };
 
@@ -85,12 +89,16 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	dev_dbg(dev, "Detected %s\n", client->name);
 
 	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
-	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
-		int ret;
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
+	    (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
+		int ret, len;
+
+		/* There are two DA9210 on Stout, one on the other boards. */
+		len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
-		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
-		if (ret != ARRAY_SIZE(da9xxx_msgs))
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
+		if (ret != len)
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
 
@@ -118,6 +126,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 
 	if (!of_machine_is_compatible("renesas,koelsch") &&
 	    !of_machine_is_compatible("renesas,lager") &&
+	    !of_machine_is_compatible("renesas,stout") &&
 	    !of_machine_is_compatible("renesas,gose"))
 		return -ENODEV;