arm64: dts: rockchip: rename and label gpio-led subnodes

Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:

arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds:
'work' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Fix these errors with help of the following rules:

1: Add nodename in the preferred form.

2: Always add a label that ends with '_led' to prevent conflicts
   with other labels such as 'power' and 'mmc'

3: If leds need pinctrl add a label that ends with '_led_pin'
   also to prevent conflicts with other labels.

patternProperties:
  # The first form is preferred, but fall back to just 'led'
  # anywhere in the node name to at least catch some child nodes.
  "(^led-[0-9a-f]$|led)":

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

1 files changed, 2 insertions, 2 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 6cc310255da8..b058ce999e3b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -50,7 +50,7 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		red {
+		red_led: led-0 {
 			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 			label = "orion:red:led";
 			pinctrl-names = "default";
@@ -58,7 +58,7 @@
 			default-state = "on";
 		};
 
-		blue {
+		blue_led: led-1 {
 			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
 			label = "orion:blue:led";
 			pinctrl-names = "default";