diff options
author | Andrew Halaney <ahalaney@redhat.com> | 2023-02-14 11:15:05 -0600 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2023-03-14 08:57:38 +0800 |
commit | feafeb53140af3cde3fba46b292b15b3a0c0635c (patch) | |
tree | c41e7a615353bb08c6f0fcccd8b7ea63f7d2bfb7 /arch/arm64/boot | |
parent | 916508c30e22f658f12dc736f8198d8a096cb24d (diff) | |
download | linux-feafeb53140af3cde3fba46b292b15b3a0c0635c.tar.gz linux-feafeb53140af3cde3fba46b292b15b3a0c0635c.tar.bz2 linux-feafeb53140af3cde3fba46b292b15b3a0c0635c.zip |
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 1bcf228a22b8..852420349c01 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -121,8 +121,6 @@ phy-handle = <ðphy0>; nvmem-cells = <&fec_mac1>; nvmem-cell-names = "mac-address"; - snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; - snps,reset-delays-us = <10 20 200000>; status = "okay"; mdio { @@ -136,6 +134,9 @@ eee-broken-1000t; qca,disable-smarteee; qca,disable-hibernation-mode; + reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; vddio-supply = <&vddio0>; vddio0: vddio-regulator { |