summaryrefslogtreecommitdiffstats
path: root/arch/m68k/atari
diff options
context:
space:
mode:
authorMichael Schmitz <schmitzmic@gmail.com>2013-04-06 13:26:45 +1300
committerGeert Uytterhoeven <geert@linux-m68k.org>2013-04-16 21:35:41 +0200
commit01a18d168776f27309e49c983415de9851d6cb57 (patch)
treedbffd96e81a739a81cb62758fd9d55bd6e620153 /arch/m68k/atari
parentc8ee038bd14881e3ceac1cafa551f260fd0acd29 (diff)
downloadlinux-01a18d168776f27309e49c983415de9851d6cb57.tar.gz
linux-01a18d168776f27309e49c983415de9851d6cb57.tar.bz2
linux-01a18d168776f27309e49c983415de9851d6cb57.zip
m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCD
Add platform devices used by the isp116x-hcd driver for EtherNAT and NetUSBee. Note that the NetUSBee also contains a RTL8019 Ethernet chip, so its platform device is used to cover the EtherNEC case, too. Register definitions thanks to David Galvez <dgalvez75@gmail.com> [Geert] Conditionalize isp1160_delay() definition Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Diffstat (limited to 'arch/m68k/atari')
-rw-r--r--arch/m68k/atari/config.c135
1 files changed, 129 insertions, 6 deletions
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 83ff931ad97a..fb2d0bd9b3ad 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -32,6 +32,7 @@
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
+#include <linux/usb/isp116x.h>
#include <linux/vt_kern.h>
#include <linux/module.h>
@@ -659,9 +660,16 @@ static void atari_get_hardware_list(struct seq_file *m)
/*
* MSch: initial platform device support for Atari,
- * required for EtherNAT/EtherNEC drivers
+ * required for EtherNAT/EtherNEC/NetUSBee drivers
*/
+#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
+static void isp1160_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+#endif
+
#ifdef CONFIG_ATARI_ETHERNAT
/*
* EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
@@ -691,8 +699,65 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
+/*
+ * ISP 1160 - using the isp116x-hcd module
+ */
+
+#define ATARI_USB_PHYS_ADDR 0x80000012
+#define ATARI_USB_IRQ 139
+
+static struct resource isp1160_resources[] = {
+ [0] = {
+ .name = "isp1160-data",
+ .start = ATARI_USB_PHYS_ADDR,
+ .end = ATARI_USB_PHYS_ADDR + 0x1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "isp1160-regs",
+ .start = ATARI_USB_PHYS_ADDR + 0x4,
+ .end = ATARI_USB_PHYS_ADDR + 0x5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "isp1160-irq",
+ .start = ATARI_USB_IRQ,
+ .end = ATARI_USB_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp1160_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp1160_delay,
+};
+
+static struct platform_device isp1160_device = {
+ .name = "isp116x-hcd",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(isp1160_resources),
+ .resource = isp1160_resources,
+ .dev = {
+ .platform_data = &isp1160_platform_data,
+ },
+};
+
static struct platform_device *atari_ethernat_devices[] __initdata = {
- &smc91x_device
+ &smc91x_device,
+ &isp1160_device
};
#endif /* CONFIG_ATARI_ETHERNAT */
@@ -728,8 +793,66 @@ static struct platform_device rtl8019_device = {
.resource = rtl8019_resources,
};
-static struct platform_device *atari_ethernec_devices[] __initdata = {
- &rtl8019_device
+/*
+ * NetUSBee: ISP1160 USB host adapter via ROM-port adapter
+ */
+
+#define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000
+#define ATARI_NETUSBEE_BASE 0x340
+#define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2
+
+static struct resource netusbee_resources[] = {
+ [0] = {
+ .name = "isp1160-data",
+ .start = ATARI_NETUSBEE_BASE,
+ .end = ATARI_NETUSBEE_BASE + 0x1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "isp1160-regs",
+ .start = ATARI_NETUSBEE_BASE + 0x20,
+ .end = ATARI_NETUSBEE_BASE + 0x21,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "isp1160-irq",
+ .start = ATARI_NETUSBEE_IRQ,
+ .end = ATARI_NETUSBEE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data netusbee_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp1160_delay,
+};
+
+static struct platform_device netusbee_device = {
+ .name = "isp116x-hcd",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(netusbee_resources),
+ .resource = netusbee_resources,
+ .dev = {
+ .platform_data = &netusbee_platform_data,
+ },
+};
+
+static struct platform_device *atari_netusbee_devices[] __initdata = {
+ &rtl8019_device,
+ &netusbee_device
};
#endif /* CONFIG_ATARI_ETHERNEC */
@@ -758,8 +881,8 @@ int __init atari_platform_init(void)
unsigned char *enec_virt;
enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
if (hwreg_present(enec_virt)) {
- error = platform_add_devices(atari_ethernec_devices,
- ARRAY_SIZE(atari_ethernec_devices));
+ error = platform_add_devices(atari_netusbee_devices,
+ ARRAY_SIZE(atari_netusbee_devices));
if (error && !rv)
rv = error;
}