diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-08-04 15:12:15 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-08-04 15:12:15 -0700 |
commit | 65f4740e72991fd565791b86b6cf8725fc8eb5bc (patch) | |
tree | b34b68b99096ab66d83319b12f9850a3142a7445 /arch | |
parent | b3c6858fb172512f63838523ae7817ae8adec564 (diff) | |
parent | 41c454fa0e86e3d186abfe1598645ead667da4ac (diff) | |
download | linux-65f4740e72991fd565791b86b6cf8725fc8eb5bc.tar.gz linux-65f4740e72991fd565791b86b6cf8725fc8eb5bc.tar.bz2 linux-65f4740e72991fd565791b86b6cf8725fc8eb5bc.zip |
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This comes a bit later than I planned, and as a consequence is a
larger than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic
Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple
randconfig build fixes. This includes making the CONFIG_MTD_XIP option
compile again, which had been broken for many years and probably has
not been missed, but it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards to
work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: dts: tango4: Request RGMII RX and TX clock delays
bus: uniphier-system-bus: set up registers when resuming
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
arm64: defconfig: enable missing HWSPINLOCK
ARM: pxa: select both FB and FB_W100 for eseries
ARM: ixp4xx: fix ioport_unmap definition
ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly
ARM: mmp: mark usb_dma_mask as __maybe_unused
ARM: omap2: mark unused functions as __maybe_unused
ARM: omap1: avoid unused variable warning
ARM: sirf: mark sirfsoc_init_late as __maybe_unused
ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}
ARM: omap1/ams-delta: warn about failed regulator enable
ARM: rpc: rename RAM_SIZE macro
ARM: w90x900: normalize clk API
ARM: ep93xx: normalize clk API
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
...
Diffstat (limited to 'arch')
43 files changed, 356 insertions, 102 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a208bfe367b5..61a0cb15067e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -380,7 +380,7 @@ config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL select ARM_AMBA - select ARM_PATCH_PHYS_VIRT + imply ARM_PATCH_PHYS_VIRT select ARM_VIC select AUTO_ZRELADDR select CLKDEV_LOOKUP diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 895fa6cfa15a..563901e0ec07 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pca0_pins>; interrupt-parent = <&gpio0>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -87,7 +87,7 @@ compatible = "nxp,pca9555"; pinctrl-names = "default"; interrupt-parent = <&gpio0>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index a423e8ebfb37..67e72bc72e80 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -301,25 +301,4 @@ pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; status = "okay"; - - /* VPIF capture port */ - port@0 { - vpif_input_ch0: endpoint@0 { - reg = <0>; - bus-width = <8>; - }; - - vpif_input_ch1: endpoint@1 { - reg = <1>; - bus-width = <8>; - data-shift = <8>; - }; - }; - - /* VPIF display port */ - port@1 { - vpif_output_ch0: endpoint { - bus-width = <8>; - }; - }; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index b837fec70eec..a0f0916156e6 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -318,11 +318,4 @@ pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>; status = "okay"; - - /* VPIF capture port */ - port { - vpif_ch0: endpoint { - bus-width = <8>; - }; - }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 1865976db5f9..c72a2132aa82 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -68,6 +68,34 @@ DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; + + nandflash_pins: nandflash_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/ + DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */ + DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */ + DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */ + DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */ + DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */ + DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */ + DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */ + DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */ + DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */ + DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */ + DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */ + DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */ + DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */ + DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */ + DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */ + DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */ + DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */ + DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */ + DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */ + DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */ + DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */ + DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */ + >; + }; }; &i2c1 { @@ -90,6 +118,8 @@ &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; nand@0,0 { compatible = "ti,omap2-nand"; @@ -98,9 +128,11 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; nand-bus-width = <16>; gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; @@ -164,7 +196,7 @@ vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; }; /* At least dm8168-evm rev c won't support multipoint, later may */ diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 59cbf958fcc3..566b2a8c8b96 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -145,7 +145,7 @@ }; elm: elm@48080000 { - compatible = "ti,816-elm"; + compatible = "ti,am3352-elm"; ti,hwmods = "elm"; reg = <0x48080000 0x2000>; interrupts = <4>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 4d57a55473af..a6298eb56978 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -190,7 +190,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { @@ -198,7 +198,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 497a9470c888..5739389f5bb8 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -59,6 +59,9 @@ compatible = "samsung,exynos4210-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; i2s0: i2s@03830000 { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2484f11761ea..858e1fed762a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1126,8 +1126,8 @@ }; }; - gpu: mali@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + gpu: gpu@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; reg = <0xffa30000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 8923ba625b76..19a8f4fcfab5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -44,7 +44,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-a83t-ccu.h> #include <dt-bindings/clock/sun8i-r-ccu.h> +#include <dt-bindings/reset/sun8i-a83t-ccu.h> / { interrupt-parent = <&gic>; @@ -175,8 +177,8 @@ compatible = "allwinner,sun8i-a83t-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 21>; - resets = <&ccu 7>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; @@ -195,7 +197,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c20800 0x400>; - clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -247,8 +249,8 @@ "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 44>, <&ccu 76>; - resets = <&ccu 32>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma 2>; dma-names = "tx"; @@ -263,8 +265,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 53>; - resets = <&ccu 40>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 6f2162608006..d38282b9e5d4 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -394,7 +394,7 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; syscon = <&syscon>; - reg = <0x01c30000 0x104>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 86d8df98802f..13bcc460bcb2 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -22,7 +22,7 @@ }; ð0 { - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ð0_phy>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b5625d009288..e568c8c6f69c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1166,7 +1166,7 @@ static struct tvp514x_platform_data tvp5146_pdata = { #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -static const struct vpif_input da850_ch0_inputs[] = { +static struct vpif_input da850_ch0_inputs[] = { { .input = { .index = 0, @@ -1181,7 +1181,7 @@ static const struct vpif_input da850_ch0_inputs[] = { }, }; -static const struct vpif_input da850_ch1_inputs[] = { +static struct vpif_input da850_ch1_inputs[] = { { .input = { .index = 0, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index f5dce9b4e617..f77a4f766050 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -218,6 +218,15 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return NULL; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 39ef3b613912..beec5f16443a 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -475,6 +475,26 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 7a0c13bf4269..844e8ac593e2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -95,8 +95,10 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p) } static inline void __indirect_writesb(volatile void __iomem *bus_addr, - const u8 *vaddr, int count) + const void *p, int count) { + const u8 *vaddr = p; + while (count--) writeb(*vaddr++, bus_addr); } @@ -118,8 +120,10 @@ static inline void __indirect_writew(u16 value, volatile void __iomem *p) } static inline void __indirect_writesw(volatile void __iomem *bus_addr, - const u16 *vaddr, int count) + const void *p, int count) { + const u16 *vaddr = p; + while (count--) writew(*vaddr++, bus_addr); } @@ -137,8 +141,9 @@ static inline void __indirect_writel(u32 value, volatile void __iomem *p) } static inline void __indirect_writesl(volatile void __iomem *bus_addr, - const u32 *vaddr, int count) + const void *p, int count) { + const u32 *vaddr = p; while (count--) writel(*vaddr++, bus_addr); } @@ -160,8 +165,10 @@ static inline u8 __indirect_readb(const volatile void __iomem *p) } static inline void __indirect_readsb(const volatile void __iomem *bus_addr, - u8 *vaddr, u32 count) + void *p, u32 count) { + u8 *vaddr = p; + while (count--) *vaddr++ = readb(bus_addr); } @@ -183,8 +190,10 @@ static inline u16 __indirect_readw(const volatile void __iomem *p) } static inline void __indirect_readsw(const volatile void __iomem *bus_addr, - u16 *vaddr, u32 count) + void *p, u32 count) { + u16 *vaddr = p; + while (count--) *vaddr++ = readw(bus_addr); } @@ -204,8 +213,10 @@ static inline u32 __indirect_readl(const volatile void __iomem *p) } static inline void __indirect_readsl(const volatile void __iomem *bus_addr, - u32 *vaddr, u32 count) + void *p, u32 count) { + u32 *vaddr = p; + while (count--) *vaddr++ = readl(bus_addr); } @@ -523,8 +534,15 @@ static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, #endif } -#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) -#define ioport_unmap(addr) +#define ioport_map(port, nr) ioport_map(port, nr) +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return ((void __iomem*)((port) + PIO_OFFSET)); +} +#define ioport_unmap(addr) ioport_unmap(addr) +static inline void ioport_unmap(void __iomem *addr) +{ +} #endif /* CONFIG_PCI */ #endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 3330ac7cfbef..671c7a09ab3d 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -238,7 +238,7 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg) #endif #if IS_ENABLED(CONFIG_USB_SUPPORT) -static u64 usb_dma_mask = ~(u32)0; +static u64 __maybe_unused usb_dma_mask = ~(u32)0; #if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index e62273aacb43..4ffbbd217e82 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -211,7 +211,7 @@ static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr) return PTR_ERR(base); writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG); - writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); + writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); iounmap(base); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 6613a6ff5dbc..6cbc69c92913 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -510,6 +510,7 @@ static void __init ams_delta_init(void) static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) { struct modem_private_data *priv = port->private_data; + int ret; if (IS_ERR(priv->regulator)) return; @@ -518,9 +519,16 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) return; if (state == 0) - regulator_enable(priv->regulator); + ret = regulator_enable(priv->regulator); else if (old == 0) - regulator_disable(priv->regulator); + ret = regulator_disable(priv->regulator); + else + ret = 0; + + if (ret) + dev_warn(port->dev, + "ams_delta modem_pm: failed to %sable regulator: %d\n", + state ? "dis" : "en", ret); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4dfb99504810..95ac1929aede 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -441,13 +441,11 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { { .chip_select = 0, } }; -#ifdef CONFIG_PM static irqreturn_t osk_mistral_wake_interrupt(int irq, void *ignored) { return IRQ_HANDLED; } -#endif static void __init osk_mistral_init(void) { @@ -515,7 +513,6 @@ static void __init osk_mistral_init(void) gpio_direction_input(OMAP_MPUIO(2)); irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); -#ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. */ @@ -529,7 +526,6 @@ static void __init osk_mistral_init(void) ret); } else enable_irq_wake(irq); -#endif } else printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index dc9e34e670a2..b1e661bb5521 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -28,7 +28,7 @@ static const struct of_device_id omap_dt_match_table[] __initconst = { { } }; -static void __init omap_generic_init(void) +static void __init __maybe_unused omap_generic_init(void) { pdata_quirks_init(omap_dt_match_table); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 1d739d1a0a65..1cd20e4d56b0 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -410,7 +410,7 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_hwmod_init_postsetup(void) +static void __init __maybe_unused omap_hwmod_init_postsetup(void) { u8 postsetup_state; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index d44e0e2f1106..841ba19d64a6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -486,7 +486,6 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); - enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 382e236fbfd9..64f6451499a7 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -692,7 +692,6 @@ static int omap3xxx_prm_late_init(void) { struct device_node *np; int irq_num; - int ret; if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; @@ -712,12 +711,8 @@ static int omap3xxx_prm_late_init(void) } omap3xxx_prm_enable_io_wakeup(); - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); - return ret; + return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); } static void __exit omap3xxx_prm_exit(void) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 87e86a4a9ead..3ab5df1ce900 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -337,6 +337,27 @@ static void omap44xx_prm_reconfigure_io_chain(void) } /** + * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O wakeups + * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and + * omap44xx_prm_reconfigure_io_chain() must be called. No return value. + */ +static void __init omap44xx_prm_enable_io_wakeup(void) +{ + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return; + + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_GLOBAL_WUEN_MASK, + inst, + omap4_prcm_irq_setup.pm_ctrl); +} + +/** * omap44xx_prm_read_reset_sources - return the last SoC reset source * * Return a u32 representing the last reset sources of the SoC. The @@ -668,6 +689,8 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; +static int omap44xx_prm_late_init(void); + /* * XXX document */ @@ -675,6 +698,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, + .late_init = &omap44xx_prm_late_init, .assert_hardreset = omap4_prminst_assert_hardreset, .deassert_hardreset = omap4_prminst_deassert_hardreset, .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted, @@ -711,6 +735,37 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) return prm_register(&omap44xx_prm_ll_data); } +static int omap44xx_prm_late_init(void) +{ + int irq_num; + + if (!(prm_features & PRM_HAS_IO_WAKEUP)) + return 0; + + irq_num = of_irq_get(prm_init_data->np, 0); + /* + * Already have OMAP4 IRQ num. For all other platforms, we need + * IRQ numbers from DT + */ + if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) { + if (irq_num == -EPROBE_DEFER) + return irq_num; + + /* Have nothing to do */ + return 0; + } + + /* Once OMAP4 DT is filled as well */ + if (irq_num >= 0) { + omap4_prcm_irq_setup.irq = irq_num; + omap4_prcm_irq_setup.xlate_irq = NULL; + } + + omap44xx_prm_enable_io_wakeup(); + + return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); +} + static void __exit omap44xx_prm_exit(void) { prm_unregister(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 8cadb302a7d2..ffe05c27087e 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -15,7 +15,7 @@ #include <linux/of_platform.h> #include "common.h" -static void __init sirfsoc_init_late(void) +static void __init __maybe_unused sirfsoc_init_late(void) { sirfsoc_pm_init(); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 76fbc115ec33..ce7d97babb0f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -566,6 +566,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select FB_W100 + select FB select PXA25x config MACH_E330 diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 990d2bf2fb45..9bf4ea6a6f74 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -17,11 +17,15 @@ #include <mach/regs-ost.h> -#define xip_irqpending() (ICIP & ICMR) +/* restored July 2017, this did not build since 2011! */ + +#define ICIP io_p2v(0x40d00000) +#define ICMR io_p2v(0x40d00004) +#define xip_irqpending() (readl(ICIP) & readl(ICMR)) /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) +#define xip_currtime() readl(OSCR) +#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4) /* * xip_cpu_idle() is used when waiting for a delay equal or larger than diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index aa79fa47373a..622d4e5df029 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -25,8 +25,8 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_SIZE 0x10000000 -#define RAM_START 0x10000000 +#define RPC_RAM_SIZE 0x10000000 +#define RPC_RAM_START 0x10000000 #define EASI_SIZE 0x08000000 /* EASI I/O */ #define EASI_START 0x08000000 diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 0db46895c82a..7d52cd97d96e 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -35,6 +35,31 @@ struct clk clk_##_name = { \ static DEFINE_SPINLOCK(clocks_lock); +/* Dummy clk routine to build generic kernel parts that may be using them */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_get_rate(clk); +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return NULL; +} +EXPORT_SYMBOL(clk_get_parent); + static void clk_gpio27_enable(struct clk *clk) { /* diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h index b3d684098fbf..cb76096a2e36 100644 --- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h +++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h @@ -20,7 +20,7 @@ #define xip_irqpending() (ICIP & ICMR) /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) +#define xip_currtime() readl_relaxed(OSCR) +#define xip_elapsed_since(x) (signed)((readl_relaxed(OSCR) - (x)) / 4) #endif /* __ARCH_SA1100_MTD_XIP_H__ */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 73e3adbc1330..44438f344dc8 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -67,8 +67,12 @@ static int regulator_quirk_notify(struct notifier_block *nb, { struct device *dev = data; struct i2c_client *client; + static bool done; u32 mon; + if (done) + return 0; + mon = ioread32(irqc + IRQC_MONITOR); dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); if (mon & REGULATOR_IRQ_MASK) @@ -99,7 +103,7 @@ static int regulator_quirk_notify(struct notifier_block *nb, remove: dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); - bus_unregister_notifier(&i2c_bus_type, nb); + done = true; iounmap(irqc); return 0; } diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index ac6fd1a2cb59..3f93fac98d97 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -93,3 +93,32 @@ void nuc900_subclk_enable(struct clk *clk, int enable) __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK); } + +/* dummy functions, should not be called */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + WARN_ON(clk); + return NULL; +} +EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 9d00622ce845..bd0f33b77f57 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -452,7 +452,7 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun50i-a64-emac"; syscon = <&syscon>; - reg = <0x01c30000 0x100>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 35b8c88c3220..738ed689ff69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -400,7 +400,7 @@ }; pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; reg = <0x0 0x00550 0x0 0x10>; #pwm-cells = <3>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 72c5a9f64ca8..94567eb17875 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -109,8 +109,8 @@ status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; + clocks = <&xtal> , <&xtal>; + clock-names = "clkin0", "clkin1" ; }; &pwm_ef { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include <dt-bindings/input/input.h> -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index dbcc3d4e2ed5..51763d674050 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -219,7 +219,7 @@ reg = <0x18800 0x100>, <0x18C00 0x20>; gpiosb: gpio { #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 726528ce54e9..4c68605675a8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -270,6 +270,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_clk 1 26>; + dma-coherent; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 95f8e5f607f6..923f354b02f0 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -64,7 +64,7 @@ compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; cps_ethernet: ethernet@0 { @@ -261,6 +261,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cps_clk 1 26>; + dma-coherent; /* * The cryptographic engine found on the cp110 * master is enabled by default at the SoC diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index aef35e0b685a..a451996f590a 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -508,7 +508,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index b5c6ee07d7f9..d1a3f3b7a0ab 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -281,7 +281,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6c7d147eed54..b4ca115b3be1 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -476,6 +476,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y +CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y |