diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
commit | e731f3146ff3bba5424b40140e1a7e6f92e94964 (patch) | |
tree | c926040385de8b020763f0d2338e0ccbf42bac45 /drivers/cpufreq | |
parent | 1f70935f637dfba226bf77182c2629fde61ed06e (diff) | |
parent | accdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff) | |
download | linux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.gz linux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.bz2 linux-e731f3146ff3bba5424b40140e1a7e6f92e94964.zip |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r-- | drivers/cpufreq/Kconfig.arm | 2 | ||||
-rw-r--r-- | drivers/cpufreq/s3c2410-cpufreq.c | 10 | ||||
-rw-r--r-- | drivers/cpufreq/s3c2412-cpufreq.c | 44 | ||||
-rw-r--r-- | drivers/cpufreq/s3c2440-cpufreq.c | 29 | ||||
-rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq-debugfs.c | 2 | ||||
-rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq.c | 14 |
6 files changed, 48 insertions, 53 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index bf5830eb664f..015ec0c02835 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -196,7 +196,6 @@ config ARM_S3C24XX_CPUFREQ_DEBUGFS config ARM_S3C2410_CPUFREQ bool depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - select S3C2410_CPUFREQ_UTILS help CPU Frequency scaling support for S3C2410 @@ -233,7 +232,6 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE config ARM_S3C2440_CPUFREQ bool "S3C2440/S3C2442 CPU Frequency scaling support" depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - select S3C2410_CPUFREQ_UTILS default y help CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c index 0c4f2ccd7e22..5dcfbf0bfb74 100644 --- a/drivers/cpufreq/s3c2410-cpufreq.c +++ b/drivers/cpufreq/s3c2410-cpufreq.c @@ -16,14 +16,14 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2410_CLKDIVN_PDIVN (1<<0) +#define S3C2410_CLKDIVN_HDIVN (1<<1) /* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */ @@ -37,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) if (cfg->divs.p_divisor != cfg->divs.h_divisor) clkdiv |= S3C2410_CLKDIVN_PDIVN; - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); } static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c index 53385a9ab957..5945945ead7c 100644 --- a/drivers/cpufreq/s3c2412-cpufreq.c +++ b/drivers/cpufreq/s3c2412-cpufreq.c @@ -19,15 +19,24 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> -#include <mach/s3c2412.h> - -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2412_CLKDIVN_PDIVN (1<<2) +#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_DVSEN (1<<4) +#define S3C2412_CLKDIVN_HALFHCLK (1<<5) +#define S3C2412_CLKDIVN_USB48DIV (1<<6) +#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) +#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) +#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) +#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) +#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) +#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) /* our clock resources. */ static struct clk *xtal; @@ -117,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) unsigned long clkdiv; unsigned long olddiv; - olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN); + olddiv = clkdiv = s3c24xx_read_clkdivn(); /* clear off current clock info */ @@ -134,32 +143,11 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) clkdiv |= S3C2412_CLKDIVN_PDIVN; s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c24xx_write_clkdivn(clkdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } -static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - struct s3c_cpufreq_board *board = cfg->board; - unsigned long refresh; - - s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__, - board->refresh, cfg->freq.hclk); - - /* Reduce both the refresh time (in ns) and the frequency (in MHz) - * by 10 each to ensure that we do not overflow 32 bit numbers. This - * should work for HCLK up to 133MHz and refresh period up to 30usec. - */ - - refresh = (board->refresh / 10); - refresh *= (cfg->freq.hclk / 100); - refresh /= (1 * 1000 * 1000); /* 10^6 */ - - s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh); - __raw_writel(refresh, S3C2412_REFRESH); -} - /* set the default cpu frequency information, based on an 200MHz part * as we have no other way of detecting the speed rating in software. */ diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c index 3f772ba8896e..148e8aedefa9 100644 --- a/drivers/cpufreq/s3c2440-cpufreq.c +++ b/drivers/cpufreq/s3c2440-cpufreq.c @@ -20,14 +20,27 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/regs-clock.h> +#define S3C2440_CLKDIVN_PDIVN (1<<0) +#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) +#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) +#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) +#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) +#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) +#define S3C2440_CLKDIVN_UCLK (1<<3) -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> +#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) +#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) +#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) +#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) +#define S3C2440_CAMDIVN_DVSEN (1<<12) + +#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) static struct clk *xtal; static struct clk *fclk; @@ -143,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__, cfg->divs.h_divisor, cfg->divs.p_divisor); - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); + clkdiv = s3c24xx_read_clkdivn(); + camdiv = s3c2440_read_camdivn(); clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN); camdiv &= ~CAMDIVN_HCLK_HALF; @@ -184,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) * then make a short delay and remove the hclk halving if necessary. */ - __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN); - __raw_writel(clkdiv, S3C2410_CLKDIVN); + s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF); + s3c24xx_write_clkdivn(clkdiv); ndelay(20); - __raw_writel(camdiv, S3C2440_CAMDIVN); + s3c2440_write_camdivn(camdiv); clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk); } diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c index 290e3539d03e..93971dfe7c75 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c +++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c @@ -18,7 +18,7 @@ #include <linux/seq_file.h> #include <linux/err.h> -#include <plat/cpu-freq-core.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> static struct dentry *dbgfs_root; static struct dentry *dbgfs_file_io; diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index ed0e713b1b57..37efc0dc3f91 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -21,17 +21,13 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/slab.h> +#include <linux/soc/samsung/s3c-cpufreq-core.h> +#include <linux/soc/samsung/s3c-pm.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/cpu.h> -#include <plat/cpu-freq-core.h> - -#include <mach/regs-clock.h> - /* note, cpufreq support deals in kHz, no Hz */ - static struct cpufreq_driver s3c24xx_driver; static struct s3c_cpufreq_config cpu_cur; static struct s3c_iotimings s3c24xx_iotiming; @@ -68,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON); + cfg->pll.driver_data = s3c24xx_read_mpllcon(); cfg->pll.frequency = fclk; cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); @@ -386,7 +382,7 @@ static unsigned int suspend_freq; static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) { suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON); + suspend_pll.driver_data = s3c24xx_read_mpllcon(); suspend_freq = clk_get_rate(clk_arm); return 0; @@ -547,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void) val |= calc_locktime(rate, cpu_cur.info->locktime_m); pr_info("%s: new locktime is 0x%08x\n", __func__, val); - __raw_writel(val, S3C2410_LOCKTIME); + s3c24xx_write_locktime(val); } static int s3c_cpufreq_build_freq(void) |