diff options
author | Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com> | 2021-09-13 13:40:15 +0000 |
---|---|---|
committer | Guenter Roeck <linux@roeck-us.net> | 2021-10-12 07:22:37 -0700 |
commit | e8ac01e5db329cf4ac2b36ef66b9d877330a990c (patch) | |
tree | 470cc662a5af313fc6c5240b36b231caf94044cd /drivers/hwmon/max6620.c | |
parent | d73287eed73fa024af704e269eca542e3bb213bb (diff) | |
download | linux-e8ac01e5db329cf4ac2b36ef66b9d877330a990c.tar.gz linux-e8ac01e5db329cf4ac2b36ef66b9d877330a990c.tar.bz2 linux-e8ac01e5db329cf4ac2b36ef66b9d877330a990c.zip |
hwmon: Add Maxim MAX6620 hardware monitoring driver
Add hardware monitoring driver for Maxim MAX6620 Fan controller
Originally-from: L. Grunenberg <contact@lgrunenberg.de>
Originally-from: Cumulus Networks <support@cumulusnetworks.com>
Originally-from: Shuotian Cheng <shuche@microsoft.com>
Signed-off-by: Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon/max6620.c')
-rw-r--r-- | drivers/hwmon/max6620.c | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/hwmon/max6620.c b/drivers/hwmon/max6620.c new file mode 100644 index 000000000000..202b6438179d --- /dev/null +++ b/drivers/hwmon/max6620.c @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for Maxim MAX6620 + * + * Originally from L. Grunenberg. + * (C) 2012 by L. Grunenberg <contact@lgrunenberg.de> + * + * Copyright (c) 2021 Dell Inc. or its subsidiaries. All Rights Reserved. + * + * based on code written by : + * 2007 by Hans J. Koch <hjk@hansjkoch.de> + * John Morris <john.morris@spirentcom.com> + * Copyright (c) 2003 Spirent Communications + * and Claus Gindhart <claus.gindhart@kontron.com> + * + * This module has only been tested with the MAX6620 chip. + * + * The datasheet was last seen at: + * + * http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf + * + */ + +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/slab.h> + +/* + * MAX 6620 registers + */ + +#define MAX6620_REG_CONFIG 0x00 +#define MAX6620_REG_FAULT 0x01 +#define MAX6620_REG_CONF_FAN0 0x02 +#define MAX6620_REG_CONF_FAN1 0x03 +#define MAX6620_REG_CONF_FAN2 0x04 +#define MAX6620_REG_CONF_FAN3 0x05 +#define MAX6620_REG_DYN_FAN0 0x06 +#define MAX6620_REG_DYN_FAN1 0x07 +#define MAX6620_REG_DYN_FAN2 0x08 +#define MAX6620_REG_DYN_FAN3 0x09 +#define MAX6620_REG_TACH0 0x10 +#define MAX6620_REG_TACH1 0x12 +#define MAX6620_REG_TACH2 0x14 +#define MAX6620_REG_TACH3 0x16 +#define MAX6620_REG_VOLT0 0x18 +#define MAX6620_REG_VOLT1 0x1A +#define MAX6620_REG_VOLT2 0x1C +#define MAX6620_REG_VOLT3 0x1E +#define MAX6620_REG_TAR0 0x20 +#define MAX6620_REG_TAR1 0x22 +#define MAX6620_REG_TAR2 0x24 +#define MAX6620_REG_TAR3 0x26 +#define MAX6620_REG_DAC0 0x28 +#define MAX6620_REG_DAC1 0x2A +#define MAX6620_REG_DAC2 0x2C +#define MAX6620_REG_DAC3 0x2E + +/* + * Config register bits + */ + +#define MAX6620_CFG_RUN BIT(7) +#define MAX6620_CFG_POR BIT(6) +#define MAX6620_CFG_TIMEOUT BIT(5) +#define MAX6620_CFG_FULLFAN BIT(4) +#define MAX6620_CFG_OSC BIT(3) +#define MAX6620_CFG_WD_MASK (BIT(2) | BIT(1)) +#define MAX6620_CFG_WD_2 BIT(1) +#define MAX6620_CFG_WD_6 BIT(2) +#define MAX6620_CFG_WD10 (BIT(2) | BIT(1)) +#define MAX6620_CFG_WD BIT(0) + +/* + * Failure status register bits + */ + +#define MAX6620_FAIL_TACH0 BIT(4) +#define MAX6620_FAIL_TACH1 BIT(5) +#define MAX6620_FAIL_TACH2 BIT(6) +#define MAX6620_FAIL_TACH3 BIT(7) +#define MAX6620_FAIL_MASK0 BIT(0) +#define MAX6620_FAIL_MASK1 BIT(1) +#define MAX6620_FAIL_MASK2 BIT(2) +#define MAX6620_FAIL_MASK3 BIT(3) + +#define MAX6620_CLOCK_FREQ 8192 /* Clock frequency in Hz */ +#define MAX6620_PULSE_PER_REV 2 /* Tachometer pulses per revolution */ + +/* Minimum and maximum values of the FAN-RPM */ +#define FAN_RPM_MIN 240 +#define FAN_RPM_MAX 30000 + +static const u8 config_reg[] = { + MAX6620_REG_CONF_FAN0, + MAX6620_REG_CONF_FAN1, + MAX6620_REG_CONF_FAN2, + MAX6620_REG_CONF_FAN3, +}; + +static const u8 dyn_reg[] = { + MAX6620_REG_DYN_FAN0, + MAX6620_REG_DYN_FAN1, + MAX6620_REG_DYN_FAN2, + MAX6620_REG_DYN_FAN3, +}; + +static const u8 tach_reg[] = { + MAX6620_REG_TACH0, + MAX6620_REG_TACH1, + MAX6620_REG_TACH2, + MAX6620_REG_TACH3, +}; + +static const u8 target_reg[] = { + MAX6620_REG_TAR0, + MAX6620_REG_TAR1, + MAX6620_REG_TAR2, + MAX6620_REG_TAR3, +}; + +/* + * Client data (each client gets its own) + */ + +struct max6620_data { + struct i2c_client *client; + struct mutex update_lock; + bool valid; /* false until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + u8 fancfg[4]; + u8 fandyn[4]; + u8 fault; + u16 tach[4]; + u16 target[4]; +}; + +static u8 max6620_fan_div_from_reg(u8 val) +{ + return BIT((val & 0xE0) >> 5); +} + +static u16 max6620_fan_rpm_to_tach(u8 div, int rpm) +{ + return (60 * div * MAX6620_CLOCK_FREQ) / (rpm * MAX6620_PULSE_PER_REV); +} + +static int max6620_fan_tach_to_rpm(u8 div, u16 tach) +{ + return (60 * div * MAX6620_CLOCK_FREQ) / (tach * MAX6620_PULSE_PER_REV); +} + +static int max6620_update_device(struct device *dev) +{ + struct max6620_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + int ret = 0; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + for (i = 0; i < 4; i++) { + ret = i2c_smbus_read_byte_data(client, config_reg[i]); + if (ret < 0) + goto error; + data->fancfg[i] = ret; + + ret = i2c_smbus_read_byte_data(client, dyn_reg[i]); + if (ret < 0) + goto error; + data->fandyn[i] = ret; + + ret = i2c_smbus_read_byte_data(client, tach_reg[i]); + if (ret < 0) + goto error; + data->tach[i] = (ret << 3) & 0x7f8; + ret = i2c_smbus_read_byte_data(client, tach_reg[i] + 1); + if (ret < 0) + goto error; + data->tach[i] |= (ret >> 5) & 0x7; + + ret = i2c_smbus_read_byte_data(client, target_reg[i]); + if (ret < 0) + goto error; + data->target[i] = (ret << 3) & 0x7f8; + ret = i2c_smbus_read_byte_data(client, target_reg[i] + 1); + if (ret < 0) + goto error; + data->target[i] |= (ret >> 5) & 0x7; + } + + /* + * Alarms are cleared on read in case the condition that + * caused the alarm is removed. Keep the value latched here + * for providing the register through different alarm files. + */ + ret = i2c_smbus_read_byte_data(client, MAX6620_REG_FAULT); + if (ret < 0) + goto error; + data->fault |= (ret >> 4) & (ret & 0x0F); + + data->last_updated = jiffies; + data->valid = true; + } + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static umode_t +max6620_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, + int channel) +{ + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_alarm: + case hwmon_fan_input: + return 0444; + case hwmon_fan_div: + case hwmon_fan_target: + return 0644; + default: + break; + } + break; + default: + break; + } + + return 0; +} + +static int +max6620_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + struct max6620_data *data; + struct i2c_client *client; + int ret; + u8 div; + u8 val1; + u8 val2; + + ret = max6620_update_device(dev); + if (ret < 0) + return ret; + data = dev_get_drvdata(dev); + client = data->client; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_alarm: + mutex_lock(&data->update_lock); + *val = !!(data->fault & BIT(channel)); + + /* Setting TACH count to re-enable fan fault detection */ + if (*val == 1) { + val1 = (data->target[channel] >> 3) & 0xff; + val2 = (data->target[channel] << 5) & 0xe0; + ret = i2c_smbus_write_byte_data(client, + target_reg[channel], val1); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + ret = i2c_smbus_write_byte_data(client, + target_reg[channel] + 1, val2); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + + data->fault &= ~BIT(channel); + } + mutex_unlock(&data->update_lock); + + break; + case hwmon_fan_div: + *val = max6620_fan_div_from_reg(data->fandyn[channel]); + break; + case hwmon_fan_input: + if (data->tach[channel] == 0) { + *val = 0; + } else { + div = max6620_fan_div_from_reg(data->fandyn[channel]); + *val = max6620_fan_tach_to_rpm(div, data->tach[channel]); + } + break; + case hwmon_fan_target: + if (data->target[channel] == 0) { + *val = 0; + } else { + div = max6620_fan_div_from_reg(data->fandyn[channel]); + *val = max6620_fan_tach_to_rpm(div, data->target[channel]); + } + break; + default: + return -EOPNOTSUPP; + } + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int +max6620_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + struct max6620_data *data; + struct i2c_client *client; + int ret; + u8 div; + u16 tach; + u8 val1; + u8 val2; + + ret = max6620_update_device(dev); + if (ret < 0) + return ret; + data = dev_get_drvdata(dev); + client = data->client; + mutex_lock(&data->update_lock); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_div: + switch (val) { + case 1: + div = 0; + break; + case 2: + div = 1; + break; + case 4: + div = 2; + break; + case 8: + div = 3; + break; + case 16: + div = 4; + break; + case 32: + div = 5; + break; + default: + ret = -EINVAL; + goto error; + } + data->fandyn[channel] &= 0x1F; + data->fandyn[channel] |= div << 5; + ret = i2c_smbus_write_byte_data(client, dyn_reg[channel], + data->fandyn[channel]); + break; + case hwmon_fan_target: + val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX); + div = max6620_fan_div_from_reg(data->fandyn[channel]); + tach = max6620_fan_rpm_to_tach(div, val); + val1 = (tach >> 3) & 0xff; + val2 = (tach << 5) & 0xe0; + ret = i2c_smbus_write_byte_data(client, target_reg[channel], val1); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(client, target_reg[channel] + 1, val2); + if (ret < 0) + break; + + /* Setting TACH count re-enables fan fault detection */ + data->fault &= ~BIT(channel); + + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + + default: + ret = -EOPNOTSUPP; + break; + } + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static const struct hwmon_channel_info *max6620_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM), + NULL +}; + +static const struct hwmon_ops max6620_hwmon_ops = { + .read = max6620_read, + .write = max6620_write, + .is_visible = max6620_is_visible, +}; + +static const struct hwmon_chip_info max6620_chip_info = { + .ops = &max6620_hwmon_ops, + .info = max6620_info, +}; + +static int max6620_init_client(struct max6620_data *data) +{ + struct i2c_client *client = data->client; + int config; + int err; + int i; + int reg; + + config = i2c_smbus_read_byte_data(client, MAX6620_REG_CONFIG); + if (config < 0) { + dev_err(&client->dev, "Error reading config, aborting.\n"); + return config; + } + + /* + * Set bit 4, disable other fans from going full speed on a fail + * failure. + */ + err = i2c_smbus_write_byte_data(client, MAX6620_REG_CONFIG, config | 0x10); + if (err < 0) { + dev_err(&client->dev, "Config write error, aborting.\n"); + return err; + } + + for (i = 0; i < 4; i++) { + reg = i2c_smbus_read_byte_data(client, config_reg[i]); + if (reg < 0) + return reg; + data->fancfg[i] = reg; + + /* Enable RPM mode */ + data->fancfg[i] |= 0xa8; + err = i2c_smbus_write_byte_data(client, config_reg[i], data->fancfg[i]); + if (err < 0) + return err; + + /* 2 counts (001) and Rate change 100 (0.125 secs) */ + data->fandyn[i] = 0x30; + err = i2c_smbus_write_byte_data(client, dyn_reg[i], data->fandyn[i]); + if (err < 0) + return err; + } + return 0; +} + +static int max6620_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct max6620_data *data; + struct device *hwmon_dev; + int err; + + data = devm_kzalloc(dev, sizeof(struct max6620_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + err = max6620_init_client(data); + if (err) + return err; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &max6620_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id max6620_id[] = { + { "max6620", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6620_id); + +static struct i2c_driver max6620_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max6620", + }, + .probe_new = max6620_probe, + .id_table = max6620_id, +}; + +module_i2c_driver(max6620_driver); + +MODULE_AUTHOR("Lucas Grunenberg"); +MODULE_DESCRIPTION("MAX6620 sensor driver"); +MODULE_LICENSE("GPL"); |