Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...

24 files changed, 671 insertions, 377 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a3f3ca29b3..009345d8f49d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -198,6 +198,11 @@ config I2C_CHT_WC
 	  SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
 	  found on some Intel Cherry Trail systems.
 
+	  Note this controller is hooked up to a TI bq24292i charger-IC,
+	  combined with a FUSB302 Type-C port-controller as such it is advised
+	  to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m
+	  (the fusb302 driver currently is in drivers/staging).
+
 config I2C_NFORCE2
 	tristate "Nvidia nForce2, nForce3 and nForce4"
 	depends on PCI
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 284f8670dbeb..7d4aeb4465b3 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -27,6 +27,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 
 /* I2C Register */
@@ -132,6 +133,7 @@ struct aspeed_i2c_bus {
 	struct i2c_adapter		adap;
 	struct device			*dev;
 	void __iomem			*base;
+	struct reset_control		*rst;
 	/* Synchronizes I/O mem access to base. */
 	spinlock_t			lock;
 	struct completion		cmd_complete;
@@ -847,6 +849,14 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	/* We just need the clock rate, we don't actually use the clk object. */
 	devm_clk_put(&pdev->dev, parent_clk);
 
+	bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
+	if (IS_ERR(bus->rst)) {
+		dev_err(&pdev->dev,
+			"missing or invalid reset controller device tree entry");
+		return PTR_ERR(bus->rst);
+	}
+	reset_control_deassert(bus->rst);
+
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "bus-frequency", &bus->bus_frequency);
 	if (ret < 0) {
@@ -917,6 +927,8 @@ static int aspeed_i2c_remove_bus(struct platform_device *pdev)
 
 	spin_unlock_irqrestore(&bus->lock, flags);
 
+	reset_control_assert(bus->rst);
+
 	i2c_del_adapter(&bus->adap);
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
index 190bbbc7bfee..0d05dadb2dc5 100644
--- a/drivers/i2c/busses/i2c-cht-wc.c
+++ b/drivers/i2c/busses/i2c-cht-wc.c
@@ -16,6 +16,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/acpi.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
@@ -25,6 +26,7 @@
 #include <linux/mfd/intel_soc_pmic.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/power/bq24190_charger.h>
 #include <linux/slab.h>
 
 #define CHT_WC_I2C_CTRL			0x5e24
@@ -232,13 +234,35 @@ static const struct irq_chip cht_wc_i2c_irq_chip = {
 	.name			= "cht_wc_ext_chrg_irq_chip",
 };
 
+static const char * const bq24190_suppliers[] = { "fusb302-typec-source" };
+
 static const struct property_entry bq24190_props[] = {
-	PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq24190_suppliers),
 	PROPERTY_ENTRY_BOOL("omit-battery-class"),
 	PROPERTY_ENTRY_BOOL("disable-reset"),
 	{ }
 };
 
+static struct regulator_consumer_supply fusb302_consumer = {
+	.supply = "vbus",
+	/* Must match fusb302 dev_name in intel_cht_int33fe.c */
+	.dev_name = "i2c-fusb302",
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		/* The name is used in intel_cht_int33fe.c do not change. */
+		.name = "cht_wc_usb_typec_vbus",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = &fusb302_consumer,
+	.num_consumer_supplies = 1,
+};
+
+static struct bq24190_platform_data bq24190_pdata = {
+	.regulator_init_data = &bq24190_vbus_init_data,
+};
+
 static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
@@ -246,7 +270,9 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	struct i2c_board_info board_info = {
 		.type = "bq24190",
 		.addr = 0x6b,
+		.dev_name = "bq24190",
 		.properties = bq24190_props,
+		.platform_data = &bq24190_pdata,
 	};
 	int ret, reg, irq;
 
@@ -314,11 +340,21 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		goto remove_irq_domain;
 
-	board_info.irq = adap->client_irq;
-	adap->client = i2c_new_device(&adap->adapter, &board_info);
-	if (!adap->client) {
-		ret = -ENOMEM;
-		goto del_adapter;
+	/*
+	 * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger,
+	 * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302
+	 * USB Type-C controller connected to another i2c bus. In this setup
+	 * the max17047 and fusb302 devices are enumerated through an INT33FE
+	 * ACPI device. If this device is present register an i2c-client for
+	 * the TI bq24292i charger.
+	 */
+	if (acpi_dev_present("INT33FE", NULL, -1)) {
+		board_info.irq = adap->client_irq;
+		adap->client = i2c_new_device(&adap->adapter, &board_info);
+		if (!adap->client) {
+			ret = -ENOMEM;
+			goto del_adapter;
+		}
 	}
 
 	platform_set_drvdata(pdev, adap);
@@ -335,7 +371,8 @@ static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
 {
 	struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
 
-	i2c_unregister_device(adap->client);
+	if (adap->client)
+		i2c_unregister_device(adap->client);
 	i2c_del_adapter(&adap->adapter);
 	irq_domain_remove(adap->irq_domain);
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index b8c43535f16c..2ead9b9eebb7 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/of_device.h>
 #include <linux/platform_data/i2c-davinci.h>
+#include <linux/pm_runtime.h>
 
 /* ----- global defines ----------------------------------------------- */
 
@@ -122,6 +123,9 @@
 /* set the SDA GPIO low */
 #define DAVINCI_I2C_DCLR_PDCLR1	BIT(1)
 
+/* timeout for pm runtime autosuspend */
+#define DAVINCI_I2C_PM_TIMEOUT	1000	/* ms */
+
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -500,7 +504,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		/* This should be 0 if all bytes were transferred
 		 * or dev->cmd_err denotes an error.
 		 */
-		dev_err(dev->dev, "abnormal termination buf_len=%i\n",
+		dev_err(dev->dev, "abnormal termination buf_len=%zu\n",
 			dev->buf_len);
 		dev->terminate = 1;
 		wmb();
@@ -541,10 +545,17 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
 
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret);
+		pm_runtime_put_noidle(dev->dev);
+		return ret;
+	}
+
 	ret = i2c_davinci_wait_bus_not_busy(dev);
 	if (ret < 0) {
 		dev_warn(dev->dev, "timeout waiting for bus ready\n");
-		return ret;
+		goto out;
 	}
 
 	for (i = 0; i < num; i++) {
@@ -552,14 +563,19 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
 			ret);
 		if (ret < 0)
-			return ret;
+			goto out;
 	}
 
+	ret = num;
 #ifdef CONFIG_CPU_FREQ
 	complete(&dev->xfr_complete);
 #endif
 
-	return num;
+out:
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
+	return ret;
 }
 
 static u32 i2c_davinci_func(struct i2c_adapter *adap)
@@ -599,6 +615,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 	int count = 0;
 	u16 w;
 
+	if (pm_runtime_suspended(dev->dev))
+		return IRQ_NONE;
+
 	while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
 		dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
 		if (count++ == 100) {
@@ -802,13 +821,24 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
-	clk_prepare_enable(dev->clk);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base)) {
-		r = PTR_ERR(dev->base);
-		goto err_unuse_clocks;
+		return PTR_ERR(dev->base);
+	}
+
+	pm_runtime_set_autosuspend_delay(dev->dev,
+					 DAVINCI_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(dev->dev);
+
+	pm_runtime_enable(dev->dev);
+
+	r = pm_runtime_get_sync(dev->dev);
+	if (r < 0) {
+		dev_err(dev->dev, "failed to runtime_get device: %d\n", r);
+		pm_runtime_put_noidle(dev->dev);
+		return r;
 	}
 
 	i2c_davinci_init(dev);
@@ -849,27 +879,40 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	if (r)
 		goto err_unuse_clocks;
 
+	pm_runtime_mark_last_busy(dev->dev);
+	pm_runtime_put_autosuspend(dev->dev);
+
 	return 0;
 
 err_unuse_clocks:
-	clk_disable_unprepare(dev->clk);
-	dev->clk = NULL;
+	pm_runtime_dont_use_autosuspend(dev->dev);
+	pm_runtime_put_sync(dev->dev);
+	pm_runtime_disable(dev->dev);
+
 	return r;
 }
 
 static int davinci_i2c_remove(struct platform_device *pdev)
 {
 	struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
+	int ret;
 
 	i2c_davinci_cpufreq_deregister(dev);
 
 	i2c_del_adapter(&dev->adapter);
 
-	clk_disable_unprepare(dev->clk);
-	dev->clk = NULL;
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		return ret;
+	}
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
 
+	pm_runtime_dont_use_autosuspend(dev->dev);
+	pm_runtime_put_sync(dev->dev);
+	pm_runtime_disable(dev->dev);
+
 	return 0;
 }
 
@@ -880,7 +923,6 @@ static int davinci_i2c_suspend(struct device *dev)
 
 	/* put I2C into reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 0);
-	clk_disable_unprepare(i2c_dev->clk);
 
 	return 0;
 }
@@ -889,7 +931,6 @@ static int davinci_i2c_resume(struct device *dev)
 {
 	struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
 
-	clk_prepare_enable(i2c_dev->clk);
 	/* take I2C out of reset */
 	davinci_i2c_reset_ctrl(i2c_dev, 1);
 
@@ -899,6 +940,8 @@ static int davinci_i2c_resume(struct device *dev)
 static const struct dev_pm_ops davinci_i2c_pm = {
 	.suspend        = davinci_i2c_suspend,
 	.resume         = davinci_i2c_resume,
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 };
 
 #define davinci_i2c_pm_ops (&davinci_i2c_pm)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 9fee4c054d3d..21bf619a86c5 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -280,6 +280,8 @@ struct dw_i2c_dev {
 	int			(*acquire_lock)(struct dw_i2c_dev *dev);
 	void			(*release_lock)(struct dw_i2c_dev *dev);
 	bool			pm_disabled;
+	bool			suspended;
+	bool			skip_resume;
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0e65b97842b4..58add69a441c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -249,6 +249,14 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
 	}
 }
 
+static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
+{
+	pm_runtime_disable(dev->dev);
+
+	if (dev->pm_disabled)
+		pm_runtime_put_noidle(dev->dev);
+}
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -257,7 +265,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	u32 acpi_speed, ht = 0;
 	struct resource *mem;
 	int i, irq, ret;
-	const int supported_speeds[] = { 0, 100000, 400000, 1000000, 3400000 };
+	static const int supported_speeds[] = {
+		0, 100000, 400000, 1000000, 3400000
+	};
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -362,14 +372,17 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
 	adap->dev.of_node = pdev->dev.of_node;
 
-	if (dev->pm_disabled) {
-		pm_runtime_forbid(&pdev->dev);
-	} else {
-		pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
-		pm_runtime_use_autosuspend(&pdev->dev);
-		pm_runtime_set_active(&pdev->dev);
-		pm_runtime_enable(&pdev->dev);
-	}
+	/* The code below assumes runtime PM to be disabled. */
+	WARN_ON(pm_runtime_enabled(&pdev->dev));
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+
+	if (dev->pm_disabled)
+		pm_runtime_get_noresume(&pdev->dev);
+
+	pm_runtime_enable(&pdev->dev);
 
 	if (dev->mode == DW_IC_SLAVE)
 		ret = i2c_dw_probe_slave(dev);
@@ -382,8 +395,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	return ret;
 
 exit_probe:
-	if (!dev->pm_disabled)
-		pm_runtime_disable(&pdev->dev);
+	dw_i2c_plat_pm_cleanup(dev);
 exit_reset:
 	if (!IS_ERR_OR_NULL(dev->rst))
 		reset_control_assert(dev->rst);
@@ -402,8 +414,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
-	if (!dev->pm_disabled)
-		pm_runtime_disable(&pdev->dev);
+	dw_i2c_plat_pm_cleanup(dev);
+
 	if (!IS_ERR_OR_NULL(dev->rst))
 		reset_control_assert(dev->rst);
 
@@ -437,13 +449,20 @@ static void dw_i2c_plat_complete(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM
-static int dw_i2c_plat_runtime_suspend(struct device *dev)
+static int dw_i2c_plat_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
+	if (i_dev->suspended) {
+		i_dev->skip_resume = true;
+		return 0;
+	}
+
 	i_dev->disable(i_dev);
 	i2c_dw_plat_prepare_clk(i_dev, false);
 
+	i_dev->suspended = true;
+
 	return 0;
 }
 
@@ -451,27 +470,27 @@ static int dw_i2c_plat_resume(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
+	if (!i_dev->suspended)
+		return 0;
+
+	if (i_dev->skip_resume) {
+		i_dev->skip_resume = false;
+		return 0;
+	}
+
 	i2c_dw_plat_prepare_clk(i_dev, true);
 	i_dev->init(i_dev);
 
-	return 0;
-}
+	i_dev->suspended = false;
 
-#ifdef CONFIG_PM_SLEEP
-static int dw_i2c_plat_suspend(struct device *dev)
-{
-	pm_runtime_resume(dev);
-	return dw_i2c_plat_runtime_suspend(dev);
+	return 0;
 }
-#endif
 
 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
-	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
-			   dw_i2c_plat_resume,
-			   NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
 };
 
 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 0ef8fcc6ac3a..d80ea6ce91bb 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -14,27 +14,17 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 struct i2c_gpio_private_data {
+	struct gpio_desc *sda;
+	struct gpio_desc *scl;
 	struct i2c_adapter adap;
 	struct i2c_algo_bit_data bit_data;
 	struct i2c_gpio_platform_data pdata;
 };
 
-/* Toggle SDA by changing the direction of the pin */
-static void i2c_gpio_setsda_dir(void *data, int state)
-{
-	struct i2c_gpio_platform_data *pdata = data;
-
-	if (state)
-		gpio_direction_input(pdata->sda_pin);
-	else
-		gpio_direction_output(pdata->sda_pin, 0);
-}
-
 /*
  * Toggle SDA by changing the output value of the pin. This is only
  * valid for pins configured as open drain (i.e. setting the value
@@ -42,20 +32,9 @@ static void i2c_gpio_setsda_dir(void *data, int state)
  */
 static void i2c_gpio_setsda_val(void *data, int state)
 {
-	struct i2c_gpio_platform_data *pdata = data;
-
-	gpio_set_value(pdata->sda_pin, state);
-}
-
-/* Toggle SCL by changing the direction of the pin. */
-static void i2c_gpio_setscl_dir(void *data, int state)
-{
-	struct i2c_gpio_platform_data *pdata = data;
+	struct i2c_gpio_private_data *priv = data;
 
-	if (state)
-		gpio_direction_input(pdata->scl_pin);
-	else
-		gpio_direction_output(pdata->scl_pin, 0);
+	gpiod_set_value(priv->sda, state);
 }
 
 /*
@@ -66,44 +45,23 @@ static void i2c_gpio_setscl_dir(void *data, int state)
  */
 static void i2c_gpio_setscl_val(void *data, int state)
 {
-	struct i2c_gpio_platform_data *pdata = data;
+	struct i2c_gpio_private_data *priv = data;
 
-	gpio_set_value(pdata->scl_pin, state);
+	gpiod_set_value(priv->scl, state);
 }
 
 static int i2c_gpio_getsda(void *data)
 {
-	struct i2c_gpio_platform_data *pdata = data;
+	struct i2c_gpio_private_data *priv = data;
 
-	return gpio_get_value(pdata->sda_pin);
+	return gpiod_get_value(priv->sda);
 }
 
 static int i2c_gpio_getscl(void *data)
 {
-	struct i2c_gpio_platform_data *pdata = data;
-
-	return gpio_get_value(pdata->scl_pin);
-}
-
-static int of_i2c_gpio_get_pins(struct device_node *np,
-				unsigned int *sda_pin, unsigned int *scl_pin)
-{
-	if (of_gpio_count(np) < 2)
-		return -ENODEV;
-
-	*sda_pin = of_get_gpio(np, 0);
-	*scl_pin = of_get_gpio(np, 1);
-
-	if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
-		pr_err("%pOF: invalid GPIO pins, sda=%d/scl=%d\n",
-		       np, *sda_pin, *scl_pin);
-		return -ENODEV;
-	}
+	struct i2c_gpio_private_data *priv = data;
 
-	return 0;
+	return gpiod_get_value(priv->scl);
 }
 
 static void of_i2c_gpio_get_props(struct device_node *np,
@@ -124,72 +82,105 @@ static void of_i2c_gpio_get_props(struct device_node *np,
 		of_property_read_bool(np, "i2c-gpio,scl-output-only");
 }
 
+static struct gpio_desc *i2c_gpio_get_desc(struct device *dev,
+					   const char *con_id,
+					   unsigned int index,
+					   enum gpiod_flags gflags)
+{
+	struct gpio_desc *retdesc;
+	int ret;
+
+	retdesc = devm_gpiod_get(dev, con_id, gflags);
+	if (!IS_ERR(retdesc)) {
+		dev_dbg(dev, "got GPIO from name %s\n", con_id);
+		return retdesc;
+	}
+
+	retdesc = devm_gpiod_get_index(dev, NULL, index, gflags);
+	if (!IS_ERR(retdesc)) {
+		dev_dbg(dev, "got GPIO from index %u\n", index);
+		return retdesc;
+	}
+
+	ret = PTR_ERR(retdesc);
+
+	/* FIXME: hack in the old code, is this really necessary? */
+	if (ret == -EINVAL)
+		retdesc = ERR_PTR(-EPROBE_DEFER);
+
+	/* This happens if the GPIO driver is not yet probed, let's defer */
+	if (ret == -ENOENT)
+		retdesc = ERR_PTR(-EPROBE_DEFER);
+
+	if (ret != -EPROBE_DEFER)
+		dev_err(dev, "error trying to get descriptor: %d\n", ret);
+
+	return retdesc;
+}
+
 static int i2c_gpio_probe(struct platform_device *pdev)
 {
 	struct i2c_gpio_private_data *priv;
 	struct i2c_gpio_platform_data *pdata;
 	struct i2c_algo_bit_data *bit_data;
 	struct i2c_adapter *adap;
-	unsigned int sda_pin, scl_pin;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	enum gpiod_flags gflags;
 	int ret;
 
-	/* First get the GPIO pins; if it fails, we'll defer the probe. */
-	if (pdev->dev.of_node) {
-		ret = of_i2c_gpio_get_pins(pdev->dev.of_node,
-					   &sda_pin, &scl_pin);
-		if (ret)
-			return ret;
-	} else {
-		if (!dev_get_platdata(&pdev->dev))
-			return -ENXIO;
-		pdata = dev_get_platdata(&pdev->dev);
-		sda_pin = pdata->sda_pin;
-		scl_pin = pdata->scl_pin;
-	}
-
-	ret = devm_gpio_request(&pdev->dev, sda_pin, "sda");
-	if (ret) {
-		if (ret == -EINVAL)
-			ret = -EPROBE_DEFER;	/* Try again later */
-		return ret;
-	}
-	ret = devm_gpio_request(&pdev->dev, scl_pin, "scl");
-	if (ret) {
-		if (ret == -EINVAL)
-			ret = -EPROBE_DEFER;	/* Try again later */
-		return ret;
-	}
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
+
 	adap = &priv->adap;
 	bit_data = &priv->bit_data;
 	pdata = &priv->pdata;
 
-	if (pdev->dev.of_node) {
-		pdata->sda_pin = sda_pin;
-		pdata->scl_pin = scl_pin;
-		of_i2c_gpio_get_props(pdev->dev.of_node, pdata);
+	if (np) {
+		of_i2c_gpio_get_props(np, pdata);
 	} else {
-		memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
+		/*
+		 * If all platform data settings are zero it is OK
+		 * to not provide any platform data from the board.
+		 */
+		if (dev_get_platdata(dev))
+			memcpy(pdata, dev_get_platdata(dev), sizeof(*pdata));
 	}
 
-	if (pdata->sda_is_open_drain) {
-		gpio_direction_output(pdata->sda_pin, 1);
-		bit_data->setsda = i2c_gpio_setsda_val;
-	} else {
-		gpio_direction_input(pdata->sda_pin);
-		bit_data->setsda = i2c_gpio_setsda_dir;
-	}
+	/*
+	 * First get the GPIO pins; if it fails, we'll defer the probe.
+	 * If the SDA line is marked from platform data or device tree as
+	 * "open drain" it means something outside of our control is making
+	 * this line being handled as open drain, and we should just handle
+	 * it as any other output. Else we enforce open drain as this is
+	 * required for an I2C bus.
+	 */
+	if (pdata->sda_is_open_drain)
+		gflags = GPIOD_OUT_HIGH;
+	else
+		gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
+	priv->sda = i2c_gpio_get_desc(dev, "sda", 0, gflags);
+	if (IS_ERR(priv->sda))
+		return PTR_ERR(priv->sda);
+
+	/*
+	 * If the SCL line is marked from platform data or device tree as
+	 * "open drain" it means something outside of our control is making
+	 * this line being handled as open drain, and we should just handle
+	 * it as any other output. Else we enforce open drain as this is
+	 * required for an I2C bus.
+	 */
+	if (pdata->scl_is_open_drain)
+		gflags = GPIOD_OUT_LOW;
+	else
+		gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+	priv->scl = i2c_gpio_get_desc(dev, "scl", 1, gflags);
+	if (IS_ERR(priv->scl))
+		return PTR_ERR(priv->scl);
 
-	if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
-		gpio_direction_output(pdata->scl_pin, 1);
-		bit_data->setscl = i2c_gpio_setscl_val;
-	} else {
-		gpio_direction_input(pdata->scl_pin);
-		bit_data->setscl = i2c_gpio_setscl_dir;
-	}
+	bit_data->setsda = i2c_gpio_setsda_val;
+	bit_data->setscl = i2c_gpio_setscl_val;
 
 	if (!pdata->scl_is_output_only)
 		bit_data->getscl = i2c_gpio_getscl;
@@ -207,18 +198,18 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	else
 		bit_data->timeout = HZ / 10;		/* 100 ms */
 
-	bit_data->data = pdata;
+	bit_data->data = priv;
 
 	adap->owner = THIS_MODULE;
-	if (pdev->dev.of_node)
-		strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
+	if (np)
+		strlcpy(adap->name, dev_name(dev), sizeof(adap->name));
 	else
 		snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
 
 	adap->algo_data = bit_data;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-	adap->dev.parent = &pdev->dev;
-	adap->dev.of_node = pdev->dev.of_node;
+	adap->dev.parent = dev;
+	adap->dev.of_node = np;
 
 	adap->nr = pdev->id;
 	ret = i2c_bit_add_numbered_bus(adap);
@@ -227,8 +218,13 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
-		 pdata->sda_pin, pdata->scl_pin,
+	/*
+	 * FIXME: using global GPIO numbers is not helpful. If/when we
+	 * get accessors to get the actual name of the GPIO line,
+	 * from the descriptor, then provide that instead.
+	 */
+	dev_info(dev, "using lines %u (SDA) and %u (SCL%s)\n",
+		 desc_to_gpio(priv->sda), desc_to_gpio(priv->scl),
 		 pdata->scl_is_output_only
 		 ? ", no clock stretching" : "");
 
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index eb1d91b986fd..f038858b6c54 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -82,6 +82,7 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
 
@@ -280,6 +281,8 @@
 #define ISR_COMPLETE(err)	(ISR_COMPLETE_M | (ISR_STATUS_M & (err)))
 #define ISR_FATAL(err)		(ISR_COMPLETE(err) | ISR_FATAL_M)
 
+#define IMG_I2C_PM_TIMEOUT	1000 /* ms */
+
 enum img_i2c_mode {
 	MODE_INACTIVE,
 	MODE_RAW,
@@ -408,6 +411,9 @@ struct img_i2c {
 	unsigned int raw_timeout;
 };
 
+static int img_i2c_runtime_suspend(struct device *dev);
+static int img_i2c_runtime_resume(struct device *dev);
+
 static void img_i2c_writel(struct img_i2c *i2c, u32 offset, u32 value)
 {
 	writel(value, i2c->base + offset);
@@ -826,9 +832,9 @@ next_atomic_cmd:
  * Timer function to check if something has gone wrong in automatic mode (so we
  * don't have to handle so many interrupts just to catch an exception).
  */
-static void img_i2c_check_timer(unsigned long arg)
+static void img_i2c_check_timer(struct timer_list *t)
 {
-	struct img_i2c *i2c = (struct img_i2c *)arg;
+	struct img_i2c *i2c = from_timer(i2c, t, check_timer);
 	unsigned long flags;
 	unsigned int line_status;
 
@@ -1054,8 +1060,8 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			atomic = true;
 	}
 
-	ret = clk_prepare_enable(i2c->scb_clk);
-	if (ret)
+	ret = pm_runtime_get_sync(adap->dev.parent);
+	if (ret < 0)
 		return ret;
 
 	for (i = 0; i < num; i++) {
@@ -1131,7 +1137,8 @@ static int img_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			break;
 	}
 
-	clk_disable_unprepare(i2c->scb_clk);
+	pm_runtime_mark_last_busy(adap->dev.parent);
+	pm_runtime_put_autosuspend(adap->dev.parent);
 
 	return i2c->msg_status ? i2c->msg_status : num;
 }
@@ -1149,12 +1156,13 @@ static const struct i2c_algorithm img_i2c_algo = {
 static int img_i2c_init(struct img_i2c *i2c)
 {
 	unsigned int clk_khz, bitrate_khz, clk_period, tckh, tckl, tsdh;
-	unsigned int i, ret, data, prescale, inc, int_bitrate, filt;
+	unsigned int i, data, prescale, inc, int_bitrate, filt;
 	struct img_i2c_timings timing;
 	u32 rev;
+	int ret;
 
-	ret = clk_prepare_enable(i2c->scb_clk);
-	if (ret)
+	ret = pm_runtime_get_sync(i2c->adap.dev.parent);
+	if (ret < 0)
 		return ret;
 
 	rev = img_i2c_readl(i2c, SCB_CORE_REV_REG);
@@ -1163,7 +1171,8 @@ static int img_i2c_init(struct img_i2c *i2c)
 			 "Unknown hardware revision (%d.%d.%d.%d)\n",
 			 (rev >> 24) & 0xff, (rev >> 16) & 0xff,
 			 (rev >> 8) & 0xff, rev & 0xff);
-		clk_disable_unprepare(i2c->scb_clk);
+		pm_runtime_mark_last_busy(i2c->adap.dev.parent);
+		pm_runtime_put_autosuspend(i2c->adap.dev.parent);
 		return -EINVAL;
 	}
 
@@ -1314,7 +1323,8 @@ static int img_i2c_init(struct img_i2c *i2c)
 	/* Perform a synchronous sequence to reset the bus */
 	ret = img_i2c_reset_bus(i2c);
 
-	clk_disable_unprepare(i2c->scb_clk);
+	pm_runtime_mark_last_busy(i2c->adap.dev.parent);
+	pm_runtime_put_autosuspend(i2c->adap.dev.parent);
 
 	return ret;
 }
@@ -1362,8 +1372,7 @@ static int img_i2c_probe(struct platform_device *pdev)
 	}
 
 	/* Set up the exception check timer */
-	setup_timer(&i2c->check_timer, img_i2c_check_timer,
-		    (unsigned long)i2c);
+	timer_setup(&i2c->check_timer, img_i2c_check_timer, 0);
 
 	i2c->bitrate = timings[0].max_bitrate;
 	if (!of_property_read_u32(node, "clock-frequency", &val))
@@ -1384,22 +1393,30 @@ static int img_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c);
 
-	ret = clk_prepare_enable(i2c->sys_clk);
-	if (ret)
-		return ret;
+	pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_I2C_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = img_i2c_runtime_resume(&pdev->dev);
+		if (ret)
+			return ret;
+	}
 
 	ret = img_i2c_init(i2c);
 	if (ret)
-		goto disable_clk;
+		goto rpm_disable;
 
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0)
-		goto disable_clk;
+		goto rpm_disable;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(i2c->sys_clk);
+rpm_disable:
+	if (!pm_runtime_enabled(&pdev->dev))
+		img_i2c_runtime_suspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	return ret;
 }
 
@@ -1408,19 +1425,55 @@ static int img_i2c_remove(struct platform_device *dev)
 	struct img_i2c *i2c = platform_get_drvdata(dev);
 
 	i2c_del_adapter(&i2c->adap);
+	pm_runtime_disable(&dev->dev);
+	if (!pm_runtime_status_suspended(&dev->dev))
+		img_i2c_runtime_suspend(&dev->dev);
+
+	return 0;
+}
+
+static int img_i2c_runtime_suspend(struct device *dev)
+{
+	struct img_i2c *i2c = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(i2c->scb_clk);
 	clk_disable_unprepare(i2c->sys_clk);
 
 	return 0;
 }
 
+static int img_i2c_runtime_resume(struct device *dev)
+{
+	struct img_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(i2c->sys_clk);
+	if (ret) {
+		dev_err(dev, "Unable to enable sys clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(i2c->scb_clk);
+	if (ret) {
+		dev_err(dev, "Unable to enable scb clock\n");
+		clk_disable_unprepare(i2c->sys_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int img_i2c_suspend(struct device *dev)
 {
 	struct img_i2c *i2c = dev_get_drvdata(dev);
+	int ret;
 
-	img_i2c_switch_mode(i2c, MODE_SUSPEND);
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		return ret;
 
-	clk_disable_unprepare(i2c->sys_clk);
+	img_i2c_switch_mode(i2c, MODE_SUSPEND);
 
 	return 0;
 }
@@ -1430,7 +1483,7 @@ static int img_i2c_resume(struct device *dev)
 	struct img_i2c *i2c = dev_get_drvdata(dev);
 	int ret;
 
-	ret = clk_prepare_enable(i2c->sys_clk);
+	ret = pm_runtime_force_resume(dev);
 	if (ret)
 		return ret;
 
@@ -1440,7 +1493,12 @@ static int img_i2c_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-static SIMPLE_DEV_PM_OPS(img_i2c_pm, img_i2c_suspend, img_i2c_resume);
+static const struct dev_pm_ops img_i2c_pm = {
+	SET_RUNTIME_PM_OPS(img_i2c_runtime_suspend,
+			   img_i2c_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(img_i2c_suspend, img_i2c_resume)
+};
 
 static const struct of_device_id img_scb_i2c_match[] = {
 	{ .compatible = "img,scb-i2c" },
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 96caf378b1dc..950a9d74f54d 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -322,7 +322,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
 
 static u32 mpc_i2c_get_sec_cfg_8xxx(void)
 {
-	struct device_node *node = NULL;
+	struct device_node *node;
 	u32 __iomem *reg;
 	u32 val = 0;
 
@@ -700,7 +700,7 @@ static int fsl_i2c_probe(struct platform_device *op)
 		}
 	}
 
-	if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) {
+	if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) {
 		clock = MPC_I2C_CLOCK_PRESERVE;
 	} else {
 		prop = of_get_property(op->dev.of_node, "clock-frequency",
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 23c2ea2baedc..b9172f08fd05 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -487,6 +487,22 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
 }
 
 /*
+ * Try bus recovery, but only if SDA is actually low.
+ */
+static int omap_i2c_recover_bus(struct omap_i2c_dev *omap)
+{
+	u16 systest;
+
+	systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG);
+	if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) &&
+	    (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC))
+		return 0; /* bus seems to already be fine */
+	if (!(systest & OMAP_I2C_SYSTEST_SCL_I_FUNC))
+		return -EBUSY; /* recovery would not fix SCL */
+	return i2c_recover_bus(&omap->adapter);
+}
+
+/*
  * Waiting on Bus Busy
  */
 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap)
@@ -496,7 +512,7 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap)
 	timeout = jiffies + OMAP_I2C_TIMEOUT;
 	while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
 		if (time_after(jiffies, timeout))
-			return i2c_recover_bus(&omap->adapter);
+			return omap_i2c_recover_bus(omap);
 		msleep(1);
 	}
 
@@ -577,8 +593,13 @@ static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap)
 		}
 
 		if (time_after(jiffies, timeout)) {
+			/*
+			 * SDA or SCL were low for the entire timeout without
+			 * any activity detected. Most likely, a slave is
+			 * locking up the bus with no master driving the clock.
+			 */
 			dev_warn(omap->dev, "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
+			return omap_i2c_recover_bus(omap);
 		}
 
 		msleep(1);
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index faa8fb8f2b8f..fa41ff799533 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -123,7 +123,6 @@ static struct i2c_adapter parport_adapter = {
 
 /* SMBus alert support */
 static struct i2c_smbus_alert_setup alert_data = {
-	.alert_edge_triggered	= 1,
 };
 static struct i2c_client *ara;
 static struct lineop parport_ctrl_irq = {
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a8e54df4aed6..319209a07353 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -237,7 +237,6 @@ static void i2c_parport_attach(struct parport *port)
 
 	/* Setup SMBus alert if supported */
 	if (adapter_parm[type].smbus_alert) {
-		adapter->alert_data.alert_edge_triggered = 1;
 		adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
 						     &adapter->alert_data);
 		if (adapter->ara)
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 42d6b3a226f8..a542041df0cd 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -112,7 +112,6 @@ static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 		jiffies, expires);
 
 	timer->expires = jiffies + expires;
-	timer->data = (unsigned long)alg_data;
 
 	add_timer(timer);
 }
@@ -435,9 +434,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void i2c_pnx_timeout(unsigned long data)
+static void i2c_pnx_timeout(struct timer_list *t)
 {
-	struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
+	struct i2c_pnx_algo_data *alg_data = from_timer(alg_data, t, mif.timer);
 	u32 ctl;
 
 	dev_err(&alg_data->adapter.dev,
@@ -659,8 +658,7 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 	if (IS_ERR(alg_data->clk))
 		return PTR_ERR(alg_data->clk);
 
-	setup_timer(&alg_data->mif.timer, i2c_pnx_timeout,
-			(unsigned long)alg_data);
+	timer_setup(&alg_data->mif.timer, i2c_pnx_timeout, 0);
 
 	snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
 		 "%s", pdev->name);
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index c811af4c8d81..95c2f1ce3cad 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -84,12 +84,7 @@
 
 #define ICSR2_NACKF	0x10
 
-/* ICBRx (@ PCLK 33MHz) */
 #define ICBR_RESERVED	0xe0 /* Should be 1 on writes */
-#define ICBRL_SP100K	(19 | ICBR_RESERVED)
-#define ICBRH_SP100K	(16 | ICBR_RESERVED)
-#define ICBRL_SP400K	(21 | ICBR_RESERVED)
-#define ICBRH_SP400K	(9 | ICBR_RESERVED)
 
 #define RIIC_INIT_MSG	-1
 
@@ -288,48 +283,99 @@ static const struct i2c_algorithm riic_algo = {
 	.functionality	= riic_func,
 };
 
-static int riic_init_hw(struct riic_dev *riic, u32 spd)
+static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
 {
 	int ret;
 	unsigned long rate;
+	int total_ticks, cks, brl, brh;
 
 	ret = clk_prepare_enable(riic->clk);
 	if (ret)
 		return ret;
 
+	if (t->bus_freq_hz > 400000) {
+		dev_err(&riic->adapter.dev,
+			"unsupported bus speed (%dHz). 400000 max\n",
+			t->bus_freq_hz);
+		clk_disable_unprepare(riic->clk);
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(riic->clk);
+
 	/*
-	 * TODO: Implement formula to calculate the timing values depending on
-	 * variable parent clock rate and arbitrary bus speed
+	 * Assume the default register settings:
+	 *  FER.SCLE = 1 (SCL sync circuit enabled, adds 2 or 3 cycles)
+	 *  FER.NFE = 1 (noise circuit enabled)
+	 *  MR3.NF = 0 (1 cycle of noise filtered out)
+	 *
+	 * Freq (CKS=000) = (I2CCLK + tr + tf)/ (BRH + 3 + 1) + (BRL + 3 + 1)
+	 * Freq (CKS!=000) = (I2CCLK + tr + tf)/ (BRH + 2 + 1) + (BRL + 2 + 1)
 	 */
-	rate = clk_get_rate(riic->clk);
-	if (rate != 33325000) {
-		dev_err(&riic->adapter.dev,
-			"invalid parent clk (%lu). Must be 33325000Hz\n", rate);
+
+	/*
+	 * Determine reference clock rate. We must be able to get the desired
+	 * frequency with only 62 clock ticks max (31 high, 31 low).
+	 * Aim for a duty of 60% LOW, 40% HIGH.
+	 */
+	total_ticks = DIV_ROUND_UP(rate, t->bus_freq_hz);
+
+	for (cks = 0; cks < 7; cks++) {
+		/*
+		 * 60% low time must be less than BRL + 2 + 1
+		 * BRL max register value is 0x1F.
+		 */
+		brl = ((total_ticks * 6) / 10);
+		if (brl <= (0x1F + 3))
+			break;
+
+		total_ticks /= 2;
+		rate /= 2;
+	}
+
+	if (brl > (0x1F + 3)) {
+		dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n",
+			(unsigned long)t->bus_freq_hz);
 		clk_disable_unprepare(riic->clk);
 		return -EINVAL;
 	}
 
+	brh = total_ticks - brl;
+
+	/* Remove automatic clock ticks for sync circuit and NF */
+	if (cks == 0) {
+		brl -= 4;
+		brh -= 4;
+	} else {
+		brl -= 3;
+		brh -= 3;
+	}
+
+	/*
+	 * Remove clock ticks for rise and fall times. Convert ns to clock
+	 * ticks.
+	 */
+	brl -= t->scl_fall_ns / (1000000000 / rate);
+	brh -= t->scl_rise_ns / (1000000000 / rate);
+
+	/* Adjust for min register values for when SCLE=1 and NFE=1 */
+	if (brl < 1)
+		brl = 1;
+	if (brh < 1)
+		brh = 1;
+
+	pr_debug("i2c-riic: freq=%lu, duty=%d, fall=%lu, rise=%lu, cks=%d, brl=%d, brh=%d\n",
+		 rate / total_ticks, ((brl + 3) * 100) / (brl + brh + 6),
+		 t->scl_fall_ns / (1000000000 / rate),
+		 t->scl_rise_ns / (1000000000 / rate), cks, brl, brh);
+
 	/* Changing the order of accessing IICRST and ICE may break things! */
 	writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
 	riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);
 
-	switch (spd) {
-	case 100000:
-		writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1);
-		writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH);
-		writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL);
-		break;
-	case 400000:
-		writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1);
-		writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH);
-		writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL);
-		break;
-	default:
-		dev_err(&riic->adapter.dev,
-			"unsupported bus speed (%dHz). Use 100000 or 400000\n", spd);
-		clk_disable_unprepare(riic->clk);
-		return -EINVAL;
-	}
+	writeb(ICMR1_CKS(cks), riic->base + RIIC_ICMR1);
+	writeb(brh | ICBR_RESERVED, riic->base + RIIC_ICBRH);
+	writeb(brl | ICBR_RESERVED, riic->base + RIIC_ICBRL);
 
 	writeb(0, riic->base + RIIC_ICSER);
 	writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
@@ -351,11 +397,10 @@ static struct riic_irq_desc riic_irqs[] = {
 
 static int riic_i2c_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct riic_dev *riic;
 	struct i2c_adapter *adap;
 	struct resource *res;
-	u32 bus_rate = 0;
+	struct i2c_timings i2c_t;
 	int i, ret;
 
 	riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
@@ -396,8 +441,9 @@ static int riic_i2c_probe(struct platform_device *pdev)
 
 	init_completion(&riic->msg_done);
 
-	of_property_read_u32(np, "clock-frequency", &bus_rate);
-	ret = riic_init_hw(riic, bus_rate);
+	i2c_parse_fw_timings(&pdev->dev, &i2c_t, true);
+
+	ret = riic_init_hw(riic, &i2c_t);
 	if (ret)
 		return ret;
 
@@ -408,7 +454,8 @@ static int riic_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, riic);
 
-	dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate);
+	dev_info(&pdev->dev, "registered with %dHz bus speed\n",
+		 i2c_t.bus_freq_hz);
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 6f2aaeb7c4fa..c03acdf71397 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -881,7 +881,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
-	const struct of_device_id *match;
+	const struct sh_mobile_dt_config *config;
 	int ret;
 	u32 bus_speed;
 
@@ -913,10 +913,8 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
 	pd->clks_per_count = 1;
 
-	match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
-	if (match) {
-		const struct sh_mobile_dt_config *config = match->data;
-
+	config = of_device_get_match_data(&dev->dev);
+	if (config) {
 		pd->clks_per_count = config->clks_per_count;
 
 		if (config->setup)
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index addd90a8cb59..7c7fc01116a1 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -282,8 +282,7 @@ static void taos_disconnect(struct serio *serio)
 {
 	struct taos_data *taos = serio_get_drvdata(serio);
 
-	if (taos->client)
-		i2c_unregister_device(taos->client);
+	i2c_unregister_device(taos->client);
 	i2c_del_adapter(&taos->adapter);
 	serio_close(serio);
 	kfree(taos);
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index df0976f4432a..19f8eec38717 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -118,8 +118,6 @@ static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
 static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
 				      struct device_node *node)
 {
-	u32 type;
-
 	if (!node)
 		return -EINVAL;
 
@@ -127,10 +125,6 @@ static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
 	if (!i2c->alert_data.irq)
 		return -EINVAL;
 
-	type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
-	i2c->alert_data.alert_edge_triggered =
-		(type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
-
 	i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
 	if (!i2c->ara)
 		return -ENODEV;
@@ -149,8 +143,7 @@ static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
 
 static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
 {
-	if (i2c->ara)
-		i2c_unregister_device(i2c->ara);
+	i2c_unregister_device(i2c->ara);
 }
 
 static int thunder_i2c_probe_pci(struct pci_dev *pdev,
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 7e89ba6fcf6f..a7ac746018ad 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -129,6 +129,11 @@ struct slimpro_i2c_dev {
 #define to_slimpro_i2c_dev(cl)	\
 		container_of(cl, struct slimpro_i2c_dev, mbox_client)
 
+enum slimpro_i2c_version {
+	XGENE_SLIMPRO_I2C_V1 = 0,
+	XGENE_SLIMPRO_I2C_V2 = 1,
+};
+
 /*
  * This function tests and clears a bitmask then returns its old value
  */
@@ -476,6 +481,15 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 		}
 	} else {
 		struct acpi_pcct_hw_reduced *cppc_ss;
+		const struct acpi_device_id *acpi_id;
+		int version = XGENE_SLIMPRO_I2C_V1;
+
+		acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
+					    &pdev->dev);
+		if (!acpi_id)
+			return -EINVAL;
+
+		version = (int)acpi_id->driver_data;
 
 		if (device_property_read_u32(&pdev->dev, "pcc-channel",
 					     &ctx->mbox_idx))
@@ -514,9 +528,16 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 		 */
 		ctx->comm_base_addr = cppc_ss->base_address;
 		if (ctx->comm_base_addr) {
-			ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
-						      cppc_ss->length,
-						      MEMREMAP_WB);
+			if (version == XGENE_SLIMPRO_I2C_V2)
+				ctx->pcc_comm_addr = memremap(
+							ctx->comm_base_addr,
+							cppc_ss->length,
+							MEMREMAP_WT);
+			else
+				ctx->pcc_comm_addr = memremap(
+							ctx->comm_base_addr,
+							cppc_ss->length,
+							MEMREMAP_WB);
 		} else {
 			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
 			rc = -ENOENT;
@@ -581,7 +602,8 @@ MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
-	{"APMC0D40", 0},
+	{"APMC0D40", XGENE_SLIMPRO_I2C_V1},
+	{"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 6b106e94bc09..b970bf8f38e5 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -81,9 +82,12 @@ struct xlp9xx_i2c_dev {
 	struct completion msg_complete;
 	int irq;
 	bool msg_read;
+	bool len_recv;
+	bool client_pec;
 	u32 __iomem *base;
 	u32 msg_buf_remaining;
 	u32 msg_len;
+	u32 ip_clk_hz;
 	u32 clk_hz;
 	u32 msg_err;
 	u8 *msg_buf;
@@ -141,10 +145,25 @@ static void xlp9xx_i2c_fill_tx_fifo(struct xlp9xx_i2c_dev *priv)
 static void xlp9xx_i2c_drain_rx_fifo(struct xlp9xx_i2c_dev *priv)
 {
 	u32 len, i;
-	u8 *buf = priv->msg_buf;
+	u8 rlen, *buf = priv->msg_buf;
 
 	len = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_FIFOWCNT) &
 				  XLP9XX_I2C_FIFO_WCNT_MASK;
+	if (!len)
+		return;
+	if (priv->len_recv) {
+		/* read length byte */
+		rlen = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
+		*buf++ = rlen;
+		len--;
+		if (priv->client_pec)
+			++rlen;
+		/* update remaining bytes and message length */
+		priv->msg_buf_remaining = rlen;
+		priv->msg_len = rlen + 1;
+		priv->len_recv = false;
+	}
+
 	len = min(priv->msg_buf_remaining, len);
 	for (i = 0; i < len; i++, buf++)
 		*buf = xlp9xx_read_i2c_reg(priv, XLP9XX_I2C_MRXFIFO);
@@ -213,7 +232,7 @@ static int xlp9xx_i2c_init(struct xlp9xx_i2c_dev *priv)
 	 * The controller uses 5 * SCL clock internally.
 	 * So prescale value should be divided by 5.
 	 */
-	prescale = DIV_ROUND_UP(XLP9XX_I2C_IP_CLK_FREQ, priv->clk_hz);
+	prescale = DIV_ROUND_UP(priv->ip_clk_hz, priv->clk_hz);
 	prescale = ((prescale - 8) / 5) - 1;
 	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_RST);
 	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, XLP9XX_I2C_CTRL_EN |
@@ -228,7 +247,7 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 			       int last_msg)
 {
 	unsigned long timeleft;
-	u32 intr_mask, cmd, val;
+	u32 intr_mask, cmd, val, len;
 
 	priv->msg_buf = msg->buf;
 	priv->msg_buf_remaining = priv->msg_len = msg->len;
@@ -261,9 +280,13 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 	else
 		val &= ~XLP9XX_I2C_CTRL_ADDMODE;
 
+	priv->len_recv = msg->flags & I2C_M_RECV_LEN;
+	len = priv->len_recv ? XLP9XX_I2C_FIFO_SIZE : msg->len;
+	priv->client_pec = msg->flags & I2C_CLIENT_PEC;
+
 	/* set data length to be transferred */
 	val = (val & ~XLP9XX_I2C_CTRL_MCTLEN_MASK) |
-	      (msg->len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
+	      (len << XLP9XX_I2C_CTRL_MCTLEN_SHIFT);
 	xlp9xx_write_i2c_reg(priv, XLP9XX_I2C_CTRL, val);
 
 	/* fill fifo during tx */
@@ -310,6 +333,9 @@ static int xlp9xx_i2c_xfer_msg(struct xlp9xx_i2c_dev *priv, struct i2c_msg *msg,
 		return -ETIMEDOUT;
 	}
 
+	/* update msg->len with actual received length */
+	if (msg->flags & I2C_M_RECV_LEN)
+		msg->len = priv->msg_len;
 	return 0;
 }
 
@@ -342,9 +368,19 @@ static const struct i2c_algorithm xlp9xx_i2c_algo = {
 static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 				    struct xlp9xx_i2c_dev *priv)
 {
+	struct clk *clk;
 	u32 freq;
 	int err;
 
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		priv->ip_clk_hz = XLP9XX_I2C_IP_CLK_FREQ;
+		dev_dbg(&pdev->dev, "using default input frequency %u\n",
+			priv->ip_clk_hz);
+	} else {
+		priv->ip_clk_hz = clk_get_rate(clk);
+	}
+
 	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
 	if (err) {
 		freq = XLP9XX_I2C_DEFAULT_FREQ;
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 56e46581b84b..706164b4c5be 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -29,6 +29,7 @@
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/idr.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
@@ -205,9 +206,6 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
 	 */
 	while (i++ < RECOVERY_CLK_CNT * 2) {
 		if (val) {
-			/* Break if SDA is high */
-			if (bri->get_sda && bri->get_sda(adap))
-					break;
 			/* SCL shouldn't be low here */
 			if (!bri->get_scl(adap)) {
 				dev_err(&adap->dev,
@@ -215,6 +213,9 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
 				ret = -EBUSY;
 				break;
 			}
+			/* Break if SDA is high */
+			if (bri->get_sda && bri->get_sda(adap))
+				break;
 		}
 
 		val = !val;
@@ -222,6 +223,10 @@ static int i2c_generic_recovery(struct i2c_adapter *adap)
 		ndelay(RECOVERY_NDELAY);
 	}
 
+	/* check if recovery actually succeeded */
+	if (bri->get_sda && !bri->get_sda(adap))
+		ret = -EBUSY;
+
 	if (bri->unprepare_recovery)
 		bri->unprepare_recovery(adap);
 
@@ -666,10 +671,16 @@ static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
 }
 
 static void i2c_dev_set_name(struct i2c_adapter *adap,
-			     struct i2c_client *client)
+			     struct i2c_client *client,
+			     struct i2c_board_info const *info)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
 
+	if (info && info->dev_name) {
+		dev_set_name(&client->dev, "i2c-%s", info->dev_name);
+		return;
+	}
+
 	if (adev) {
 		dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
 		return;
@@ -766,7 +777,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->dev.of_node = info->of_node;
 	client->dev.fwnode = info->fwnode;
 
-	i2c_dev_set_name(adap, client);
+	i2c_dev_set_name(adap, client, info);
 
 	if (info->properties) {
 		status = device_add_properties(&client->dev, info->properties);
@@ -808,6 +819,8 @@ EXPORT_SYMBOL_GPL(i2c_new_device);
  */
 void i2c_unregister_device(struct i2c_client *client)
 {
+	if (!client)
+		return;
 	if (client->dev.of_node)
 		of_node_clear_flag(client->dev.of_node, OF_POPULATED);
 	if (ACPI_COMPANION(&client->dev))
@@ -1259,6 +1272,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		goto out_list;
 	}
 
+	res = of_i2c_setup_smbus_alert(adap);
+	if (res)
+		goto out_reg;
+
 	dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
 
 	pm_runtime_no_callbacks(&adap->dev);
@@ -1290,6 +1307,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	return 0;
 
+out_reg:
+	init_completion(&adap->dev_released);
+	device_unregister(&adap->dev);
+	wait_for_completion(&adap->dev_released);
 out_list:
 	mutex_lock(&core_lock);
 	idr_remove(&i2c_adapter_idr, adap->nr);
@@ -1417,8 +1438,7 @@ static int __unregister_client(struct device *dev, void *dummy)
 static int __unregister_dummy(struct device *dev, void *dummy)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
-	if (client)
-		i2c_unregister_device(client);
+	i2c_unregister_device(client);
 	return 0;
 }
 
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index 10f00a82ec9d..4bb9927afd01 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/smbus.h>
@@ -592,3 +593,57 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
 	return i;
 }
 EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
+
+/**
+ * i2c_setup_smbus_alert - Setup SMBus alert support
+ * @adapter: the target adapter
+ * @setup: setup data for the SMBus alert handler
+ * Context: can sleep
+ *
+ * Setup handling of the SMBus alert protocol on a given I2C bus segment.
+ *
+ * Handling can be done either through our IRQ handler, or by the
+ * adapter (from its handler, periodic polling, or whatever).
+ *
+ * NOTE that if we manage the IRQ, we *MUST* know if it's level or
+ * edge triggered in order to hand it to the workqueue correctly.
+ * If triggering the alert seems to wedge the system, you probably
+ * should have said it's level triggered.
+ *
+ * This returns the ara client, which should be saved for later use with
+ * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
+ * to indicate an error.
+ */
+struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
+					 struct i2c_smbus_alert_setup *setup)
+{
+	struct i2c_board_info ara_board_info = {
+		I2C_BOARD_INFO("smbus_alert", 0x0c),
+		.platform_data = setup,
+	};
+
+	return i2c_new_device(adapter, &ara_board_info);
+}
+EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
+
+#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
+int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
+{
+	struct i2c_client *client;
+	int irq;
+
+	irq = of_property_match_string(adapter->dev.of_node, "interrupt-names",
+				       "smbus_alert");
+	if (irq == -EINVAL || irq == -ENODATA)
+		return 0;
+	else if (irq < 0)
+		return irq;
+
+	client = i2c_setup_smbus_alert(adapter, NULL);
+	if (!client)
+		return -ENODEV;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
+#endif
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index f9271c713d20..5a1dd7f13bac 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -21,12 +21,11 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
 struct i2c_smbus_alert {
-	unsigned int		alert_edge_triggered:1;
-	int			irq;
 	struct work_struct	alert;
 	struct i2c_client	*ara;		/* Alert response address */
 };
@@ -72,13 +71,12 @@ static int smbus_do_alert(struct device *dev, void *addrp)
  * The alert IRQ handler needs to hand work off to a task which can issue
  * SMBus calls, because those sleeping calls can't be made in IRQ context.
  */
-static void smbus_alert(struct work_struct *work)
+static irqreturn_t smbus_alert(int irq, void *d)
 {
-	struct i2c_smbus_alert *alert;
+	struct i2c_smbus_alert *alert = d;
 	struct i2c_client *ara;
 	unsigned short prev_addr = 0;	/* Not a valid address */
 
-	alert = container_of(work, struct i2c_smbus_alert, alert);
 	ara = alert->ara;
 
 	for (;;) {
@@ -115,21 +113,17 @@ static void smbus_alert(struct work_struct *work)
 		prev_addr = data.addr;
 	}
 
-	/* We handled all alerts; re-enable level-triggered IRQs */
-	if (!alert->alert_edge_triggered)
-		enable_irq(alert->irq);
+	return IRQ_HANDLED;
 }
 
-static irqreturn_t smbalert_irq(int irq, void *d)
+static void smbalert_work(struct work_struct *work)
 {
-	struct i2c_smbus_alert *alert = d;
+	struct i2c_smbus_alert *alert;
 
-	/* Disable level-triggered IRQs until we handle them */
-	if (!alert->alert_edge_triggered)
-		disable_irq_nosync(irq);
+	alert = container_of(work, struct i2c_smbus_alert, alert);
+
+	smbus_alert(0, alert);
 
-	schedule_work(&alert->alert);
-	return IRQ_HANDLED;
 }
 
 /* Setup SMBALERT# infrastructure */
@@ -139,28 +133,35 @@ static int smbalert_probe(struct i2c_client *ara,
 	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
 	struct i2c_smbus_alert *alert;
 	struct i2c_adapter *adapter = ara->adapter;
-	int res;
+	int res, irq;
 
 	alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert),
 			     GFP_KERNEL);
 	if (!alert)
 		return -ENOMEM;
 
-	alert->alert_edge_triggered = setup->alert_edge_triggered;
-	alert->irq = setup->irq;
-	INIT_WORK(&alert->alert, smbus_alert);
+	if (setup) {
+		irq = setup->irq;
+	} else {
+		irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert");
+		if (irq <= 0)
+			return irq;
+	}
+
+	INIT_WORK(&alert->alert, smbalert_work);
 	alert->ara = ara;
 
-	if (setup->irq > 0) {
-		res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq,
-				       0, "smbus_alert", alert);
+	if (irq > 0) {
+		res = devm_request_threaded_irq(&ara->dev, irq,
+						NULL, smbus_alert,
+						IRQF_SHARED | IRQF_ONESHOT,
+						"smbus_alert", alert);
 		if (res)
 			return res;
 	}
 
 	i2c_set_clientdata(ara, alert);
-	dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n",
-		 setup->alert_edge_triggered ? "edge" : "level");
+	dev_info(&adapter->dev, "supports SMBALERT#\n");
 
 	return 0;
 }
@@ -190,38 +191,6 @@ static struct i2c_driver smbalert_driver = {
 };
 
 /**
- * i2c_setup_smbus_alert - Setup SMBus alert support
- * @adapter: the target adapter
- * @setup: setup data for the SMBus alert handler
- * Context: can sleep
- *
- * Setup handling of the SMBus alert protocol on a given I2C bus segment.
- *
- * Handling can be done either through our IRQ handler, or by the
- * adapter (from its handler, periodic polling, or whatever).
- *
- * NOTE that if we manage the IRQ, we *MUST* know if it's level or
- * edge triggered in order to hand it to the workqueue correctly.
- * If triggering the alert seems to wedge the system, you probably
- * should have said it's level triggered.
- *
- * This returns the ara client, which should be saved for later use with
- * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
- * to indicate an error.
- */
-struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
-					 struct i2c_smbus_alert_setup *setup)
-{
-	struct i2c_board_info ara_board_info = {
-		I2C_BOARD_INFO("smbus_alert", 0x0c),
-		.platform_data = setup,
-	};
-
-	return i2c_new_device(adapter, &ara_board_info);
-}
-EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);
-
-/**
  * i2c_handle_smbus_alert - Handle an SMBus alert
  * @ara: the ARA client on the relevant adapter
  * Context: can't sleep
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 7b992db38021..2ca068d8b92d 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -246,36 +246,6 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
 	return handled ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static void pca954x_irq_mask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	data->irq_mask &= ~BIT(pos);
-	if (!data->irq_mask)
-		disable_irq(data->client->irq);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
-static void pca954x_irq_unmask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	if (!data->irq_mask)
-		enable_irq(data->client->irq);
-	data->irq_mask |= BIT(pos);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
 static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
 {
 	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
@@ -285,8 +255,6 @@ static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
 
 static struct irq_chip pca954x_irq_chip = {
 	.name = "i2c-mux-pca954x",
-	.irq_mask = pca954x_irq_mask,
-	.irq_unmask = pca954x_irq_unmask,
 	.irq_set_type = pca954x_irq_set_type,
 };
 
@@ -294,7 +262,7 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 {
 	struct pca954x *data = i2c_mux_priv(muxc);
 	struct i2c_client *client = data->client;
-	int c, err, irq;
+	int c, irq;
 
 	if (!data->chip->has_irq || client->irq <= 0)
 		return 0;
@@ -309,29 +277,31 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 
 	for (c = 0; c < data->chip->nchans; c++) {
 		irq = irq_create_mapping(data->irq, c);
+		if (!irq) {
+			dev_err(&client->dev, "failed irq create map\n");
+			return -EINVAL;
+		}
 		irq_set_chip_data(irq, data);
 		irq_set_chip_and_handler(irq, &pca954x_irq_chip,
 			handle_simple_irq);
 	}
 
-	err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL,
-					pca954x_irq_handler,
-					IRQF_ONESHOT | IRQF_SHARED,
-					"pca954x", data);
-	if (err)
-		goto err_req_irq;
+	return 0;
+}
 
-	disable_irq(data->client->irq);
+static void pca954x_cleanup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int c, irq;
 
-	return 0;
-err_req_irq:
-	for (c = 0; c < data->chip->nchans; c++) {
-		irq = irq_find_mapping(data->irq, c);
-		irq_dispose_mapping(irq);
+	if (data->irq) {
+		for (c = 0; c < data->chip->nchans; c++) {
+			irq = irq_find_mapping(data->irq, c);
+			irq_dispose_mapping(irq);
+		}
+		irq_domain_remove(data->irq);
 	}
-	irq_domain_remove(data->irq);
-
-	return err;
+	i2c_mux_del_adapters(muxc);
 }
 
 /*
@@ -391,7 +361,7 @@ static int pca954x_probe(struct i2c_client *client,
 
 	ret = pca954x_irq_setup(muxc);
 	if (ret)
-		goto fail_del_adapters;
+		goto fail_cleanup;
 
 	/* Now create an adapter for each channel */
 	for (num = 0; num < data->chip->nchans; num++) {
@@ -414,7 +384,16 @@ static int pca954x_probe(struct i2c_client *client,
 
 		ret = i2c_mux_add_adapter(muxc, force, num, class);
 		if (ret)
-			goto fail_del_adapters;
+			goto fail_cleanup;
+	}
+
+	if (data->irq) {
+		ret = devm_request_threaded_irq(&client->dev, data->client->irq,
+						NULL, pca954x_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						"pca954x", data);
+		if (ret)
+			goto fail_cleanup;
 	}
 
 	dev_info(&client->dev,
@@ -424,26 +403,16 @@ static int pca954x_probe(struct i2c_client *client,
 
 	return 0;
 
-fail_del_adapters:
-	i2c_mux_del_adapters(muxc);
+fail_cleanup:
+	pca954x_cleanup(muxc);
 	return ret;
 }
 
 static int pca954x_remove(struct i2c_client *client)
 {
 	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
-	struct pca954x *data = i2c_mux_priv(muxc);
-	int c, irq;
 
-	if (data->irq) {
-		for (c = 0; c < data->chip->nchans; c++) {
-			irq = irq_find_mapping(data->irq, c);
-			irq_dispose_mapping(irq);
-		}
-		irq_domain_remove(data->irq);
-	}
-
-	i2c_mux_del_adapters(muxc);
+	pca954x_cleanup(muxc);
 	return 0;
 }
 
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
index d97031804de8..f6c9c3dc6cad 100644
--- a/drivers/i2c/muxes/i2c-mux-reg.c
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -107,9 +107,9 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
 	put_device(&adapter->dev);
 
 	mux->data.n_values = of_get_child_count(np);
-	if (of_find_property(np, "little-endian", NULL)) {
+	if (of_property_read_bool(np, "little-endian")) {
 		mux->data.little_endian = true;
-	} else if (of_find_property(np, "big-endian", NULL)) {
+	} else if (of_property_read_bool(np, "big-endian")) {
 		mux->data.little_endian = false;
 	} else {
 #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \
@@ -122,10 +122,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux,
 #error Endianness not defined?
 #endif
 	}
-	if (of_find_property(np, "write-only", NULL))
-		mux->data.write_only = true;
-	else
-		mux->data.write_only = false;
+	mux->data.write_only = of_property_read_bool(np, "write-only");
 
 	values = devm_kzalloc(&pdev->dev,
 			      sizeof(*mux->data.values) * mux->data.n_values,